| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/spmi/spmi.h> |
| #include <dt-bindings/msm/power-on.h> |
| |
| &spmi_bus { |
| qcom,pm660l@2 { |
| compatible = "qcom,spmi-pmic"; |
| reg = <0x2 SPMI_USID>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| pm660l_revid: qcom,revid@100 { |
| compatible = "qcom,qpnp-revid"; |
| reg = <0x100 0x100>; |
| }; |
| |
| pm660l_pbs: qcom,pbs@7300 { |
| compatible = "qcom,qpnp-pbs"; |
| reg = <0x7300 0x100>; |
| }; |
| |
| qcom,power-on@800 { |
| compatible = "qcom,qpnp-power-on"; |
| reg = <0x800 0x100>; |
| qcom,secondary-pon-reset; |
| qcom,hard-reset-poweroff-type = |
| <PON_POWER_OFF_SHUTDOWN>; |
| }; |
| |
| pm660l_tz: qcom,temp-alarm@2400 { |
| compatible = "qcom,spmi-temp-alarm"; |
| reg = <0x2400 0x100>; |
| interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_RISING>; |
| #thermal-sensor-cells = <0>; |
| qcom,temperature-threshold-set = <1>; |
| }; |
| |
| pm660l_gpios: pinctrl@c000 { |
| compatible = "qcom,spmi-gpio"; |
| reg = <0xc000 0xc00>; |
| interrupts = <0x2 0xc0 0 IRQ_TYPE_NONE>, |
| <0x2 0xc1 0 IRQ_TYPE_NONE>, |
| <0x2 0xc2 0 IRQ_TYPE_NONE>, |
| <0x2 0xc3 0 IRQ_TYPE_NONE>, |
| <0x2 0xc4 0 IRQ_TYPE_NONE>, |
| <0x2 0xc5 0 IRQ_TYPE_NONE>, |
| <0x2 0xc6 0 IRQ_TYPE_NONE>, |
| <0x2 0xc7 0 IRQ_TYPE_NONE>, |
| <0x2 0xc8 0 IRQ_TYPE_NONE>, |
| <0x2 0xc9 0 IRQ_TYPE_NONE>, |
| <0x2 0xca 0 IRQ_TYPE_NONE>, |
| <0x2 0xcb 0 IRQ_TYPE_NONE>; |
| interrupt-names = "pm660l_gpio1", "pm660l_gpio2", |
| "pm660l_gpio3", "pm660l_gpio4", |
| "pm660l_gpio5", "pm660l_gpio6", |
| "pm660l_gpio7", "pm660l_gpio8", |
| "pm660l_gpio9", "pm660l_gpio10", |
| "pm660l_gpio11", "pm660l_gpio12"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| }; |
| |
| pm660l_3: qcom,pm660l@3 { |
| compatible ="qcom,spmi-pmic"; |
| reg = <0x3 SPMI_USID>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| pm660l_lpg: qcom,pwms@b100 { |
| compatible = "qcom,pwm-lpg"; |
| reg = <0xb100 0x300>, <0xb000 0x100>; |
| reg-names = "lpg-base", "lut-base"; |
| #pwm-cells = <2>; |
| qcom,num-lpg-channels = <3>; |
| qcom,lut-patterns = <0 10 20 30 40 50 60 70 80 90 100 |
| 90 80 70 60 50 40 30 20 10 0>; |
| |
| lpg1 { |
| qcom,lpg-chan-id = <1>; |
| qcom,ramp-step-ms = <100>; |
| qcom,ramp-pause-hi-count = <2>; |
| qcom,ramp-pause-lo-count = <2>; |
| qcom,ramp-low-index = <0>; |
| qcom,ramp-high-index = <20>; |
| qcom,ramp-from-low-to-high; |
| qcom,ramp-pattern-repeat; |
| }; |
| lpg2 { |
| qcom,lpg-chan-id = <2>; |
| qcom,ramp-step-ms = <100>; |
| qcom,ramp-pause-hi-count = <2>; |
| qcom,ramp-pause-lo-count = <2>; |
| qcom,ramp-low-index = <0>; |
| qcom,ramp-high-index = <20>; |
| qcom,ramp-from-low-to-high; |
| qcom,ramp-pattern-repeat; |
| }; |
| |
| lpg3 { |
| qcom,lpg-chan-id = <3>; |
| qcom,ramp-step-ms = <100>; |
| qcom,ramp-pause-hi-count = <2>; |
| qcom,ramp-pause-lo-count = <2>; |
| qcom,ramp-low-index = <0>; |
| qcom,ramp-high-index = <20>; |
| qcom,ramp-from-low-to-high; |
| qcom,ramp-pattern-repeat; |
| }; |
| }; |
| |
| pm660l_pwm: qcom,pwms@b400 { |
| compatible = "qcom,pwm-lpg"; |
| reg = <0xb400 0x100>; |
| reg-names = "lpg-base"; |
| #pwm-cells = <2>; |
| qcom,num-lpg-channels = <1>; |
| }; |
| |
| pm660l_rgb_led: qcom,leds@d000 { |
| compatible = "qcom,tri-led"; |
| reg = <0xd000 0x100>; |
| red { |
| label = "red"; |
| pwms = <&pm660l_lpg 2 1000000>; |
| led-sources = <0>; |
| linux,default-trigger = "timer"; |
| }; |
| green { |
| label = "green"; |
| pwms = <&pm660l_lpg 1 1000000>; |
| led-sources = <1>; |
| linux,default-trigger = "timer"; |
| }; |
| blue { |
| label = "blue"; |
| pwms = <&pm660l_lpg 0 1000000>; |
| led-sources = <2>; |
| linux,default-trigger = "timer"; |
| }; |
| }; |
| |
| pm660l_wled: qcom,leds@d800 { |
| compatible = "qcom,pm660l-spmi-wled"; |
| reg = <0xd800 0x100>, |
| <0xd900 0x100>; |
| reg-names = "wled-ctrl-base", |
| "wled-sink-base"; |
| interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "ovp-irq"; |
| label = "backlight"; |
| qcom,pmic-revid = <&pm660l_revid>; |
| qcom,auto-calibration; |
| qcom,sync-dly = <800>; |
| status = "ok"; |
| }; |
| |
| flash_led: qcom,leds@d300 { |
| compatible = "qcom,qpnp-flash-led-v2"; |
| reg = <0xd300 0x100>; |
| label = "flash"; |
| interrupts = <0x3 0xd3 0x0 IRQ_TYPE_EDGE_RISING>, |
| <0x3 0xd3 0x3 IRQ_TYPE_EDGE_RISING>, |
| <0x3 0xd3 0x4 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "led-fault-irq", |
| "all-ramp-down-done-irq", |
| "all-ramp-up-done-irq"; |
| qcom,hdrm-auto-mode; |
| qcom,short-circuit-det; |
| qcom,open-circuit-det; |
| qcom,vph-droop-det; |
| qcom,thermal-derate-en; |
| qcom,thermal-derate-current = <200 500 1000>; |
| qcom,isc-delay = <192>; |
| qcom,pmic-revid = <&pm660l_revid>; |
| |
| pm660l_flash0: qcom,flash_0 { |
| label = "flash"; |
| qcom,led-name = "led:flash_0"; |
| qcom,max-current = <1500>; |
| qcom,default-led-trigger = "flash0_trigger"; |
| qcom,id = <0>; |
| qcom,current-ma = <1000>; |
| qcom,duration-ms = <1280>; |
| qcom,ires-ua = <12500>; |
| qcom,hdrm-voltage-mv = <325>; |
| qcom,hdrm-vol-hi-lo-win-mv = <100>; |
| }; |
| |
| pm660l_flash1: qcom,flash_1 { |
| label = "flash"; |
| qcom,led-name = "led:flash_1"; |
| qcom,max-current = <1500>; |
| qcom,default-led-trigger = "flash1_trigger"; |
| qcom,id = <1>; |
| qcom,current-ma = <1000>; |
| qcom,duration-ms = <1280>; |
| qcom,ires-ua = <12500>; |
| qcom,hdrm-voltage-mv = <325>; |
| qcom,hdrm-vol-hi-lo-win-mv = <100>; |
| }; |
| |
| pm660l_flash2: qcom,flash_2 { |
| label = "flash"; |
| qcom,led-name = "led:flash_2"; |
| qcom,max-current = <750>; |
| qcom,default-led-trigger = "flash2_trigger"; |
| qcom,id = <2>; |
| qcom,current-ma = <500>; |
| qcom,duration-ms = <1280>; |
| qcom,ires-ua = <12500>; |
| qcom,hdrm-voltage-mv = <325>; |
| qcom,hdrm-vol-hi-lo-win-mv = <100>; |
| }; |
| |
| pm660l_torch0: qcom,torch_0 { |
| label = "torch"; |
| qcom,led-name = "led:torch_0"; |
| qcom,max-current = <500>; |
| qcom,default-led-trigger = "torch0_trigger"; |
| qcom,id = <0>; |
| qcom,current-ma = <300>; |
| qcom,ires-ua = <12500>; |
| qcom,hdrm-voltage-mv = <325>; |
| qcom,hdrm-vol-hi-lo-win-mv = <100>; |
| }; |
| |
| pm660l_torch1: qcom,torch_1 { |
| label = "torch"; |
| qcom,led-name = "led:torch_1"; |
| qcom,max-current = <500>; |
| qcom,default-led-trigger = "torch1_trigger"; |
| qcom,id = <1>; |
| qcom,current-ma = <300>; |
| qcom,ires-ua = <12500>; |
| qcom,hdrm-voltage-mv = <325>; |
| qcom,hdrm-vol-hi-lo-win-mv = <100>; |
| }; |
| |
| pm660l_torch2: qcom,torch_2 { |
| label = "torch"; |
| qcom,led-name = "led:torch_2"; |
| qcom,max-current = <500>; |
| qcom,default-led-trigger = "torch2_trigger"; |
| qcom,id = <2>; |
| qcom,current-ma = <300>; |
| qcom,ires-ua = <12500>; |
| qcom,hdrm-voltage-mv = <325>; |
| qcom,hdrm-vol-hi-lo-win-mv = <100>; |
| }; |
| |
| pm660l_switch0: qcom,led_switch_0 { |
| label = "switch"; |
| qcom,led-name = "led:switch_0"; |
| qcom,led-mask = <3>; |
| qcom,default-led-trigger = "switch0_trigger"; |
| }; |
| |
| pm660l_switch1: qcom,led_switch_1 { |
| label = "switch"; |
| qcom,led-name = "led:switch_1"; |
| qcom,led-mask = <4>; |
| qcom,default-led-trigger = "switch1_trigger"; |
| }; |
| }; |
| |
| pm660l_lcdb: qpnp-lcdb@ec00 { |
| compatible = "qcom,qpnp-lcdb-regulator"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xec00 0x100>; |
| interrupts = <0x3 0xec 0x1 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "sc-irq"; |
| |
| qcom,pmic-revid = <&pm660l_revid>; |
| |
| lcdb_ldo_vreg: ldo { |
| label = "ldo"; |
| regulator-name = "lcdb_ldo"; |
| regulator-min-microvolt = <4000000>; |
| regulator-max-microvolt = <6000000>; |
| }; |
| |
| lcdb_ncp_vreg: ncp { |
| label = "ncp"; |
| regulator-name = "lcdb_ncp"; |
| regulator-min-microvolt = <4000000>; |
| regulator-max-microvolt = <6000000>; |
| }; |
| }; |
| |
| pm660a_oledb: qpnp-oledb@e000 { |
| compatible = "qcom,qpnp-oledb-regulator"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| qcom,pmic-revid = <&pm660l_revid>; |
| reg = <0xe000 0x100>; |
| qcom,pbs-client = <&pm660l_pbs>; |
| |
| label = "oledb"; |
| regulator-name = "regulator-oledb"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <8100000>; |
| |
| qcom,swire-control; |
| qcom,ext-pin-control; |
| status = "disabled"; |
| }; |
| |
| pm660a_labibb: qpnp-labibb-regulator { |
| compatible = "qcom,qpnp-labibb-regulator"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| qcom,pmic-revid = <&pm660l_revid>; |
| qcom,swire-control; |
| status = "disabled"; |
| |
| ibb_regulator: qcom,ibb@dc00 { |
| reg = <0xdc00 0x100>; |
| reg-names = "ibb_reg"; |
| regulator-name = "ibb_reg"; |
| |
| regulator-min-microvolt = <4000000>; |
| regulator-max-microvolt = <6300000>; |
| |
| qcom,qpnp-ibb-min-voltage = <1400000>; |
| qcom,qpnp-ibb-step-size = <100000>; |
| qcom,qpnp-ibb-slew-rate = <2000000>; |
| qcom,qpnp-ibb-init-voltage = <4000000>; |
| qcom,qpnp-ibb-init-amoled-voltage = <4000000>; |
| }; |
| |
| lab_regulator: qcom,lab@de00 { |
| reg = <0xde00 0x100>; |
| reg-names = "lab"; |
| regulator-name = "lab_reg"; |
| |
| regulator-min-microvolt = <4600000>; |
| regulator-max-microvolt = <6100000>; |
| |
| qcom,qpnp-lab-min-voltage = <4600000>; |
| qcom,qpnp-lab-step-size = <100000>; |
| qcom,qpnp-lab-slew-rate = <5000>; |
| qcom,qpnp-lab-init-voltage = <4600000>; |
| qcom,qpnp-lab-init-amoled-voltage = <4600000>; |
| |
| qcom,notify-lab-vreg-ok-sts; |
| }; |
| }; |
| }; |
| }; |
| |
| &thermal_zones { |
| pm660l_temp_alarm: pm660l-tz { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "step_wise"; |
| thermal-sensors = <&pm660l_tz>; |
| wake-capable-sensor; |
| |
| trips { |
| pm660l_trip0: trip0 { |
| temperature = <95000>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| pm660l_trip1: trip1 { |
| temperature = <115000>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| trip2 { |
| temperature = <145000>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| }; |