| /* |
| * drivers/ata/sata_fsl.c |
| * |
| * Freescale 3.0Gbps SATA device driver |
| * |
| * Author: Ashish Kalra <ashish.kalra@freescale.com> |
| * Li Yang <leoli@freescale.com> |
| * |
| * Copyright (c) 2006-2007, 2011-2012 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <linux/libata.h> |
| #include <asm/io.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_platform.h> |
| |
| static unsigned int intr_coalescing_count; |
| module_param(intr_coalescing_count, int, S_IRUGO); |
| MODULE_PARM_DESC(intr_coalescing_count, |
| "INT coalescing count threshold (1..31)"); |
| |
| static unsigned int intr_coalescing_ticks; |
| module_param(intr_coalescing_ticks, int, S_IRUGO); |
| MODULE_PARM_DESC(intr_coalescing_ticks, |
| "INT coalescing timer threshold in AHB ticks"); |
| /* Controller information */ |
| enum { |
| SATA_FSL_QUEUE_DEPTH = 16, |
| SATA_FSL_MAX_PRD = 63, |
| SATA_FSL_MAX_PRD_USABLE = SATA_FSL_MAX_PRD - 1, |
| SATA_FSL_MAX_PRD_DIRECT = 16, /* Direct PRDT entries */ |
| |
| SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | |
| ATA_FLAG_PMP | ATA_FLAG_NCQ | |
| ATA_FLAG_AN | ATA_FLAG_NO_LOG_PAGE), |
| |
| SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH, |
| SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */ |
| SATA_FSL_CMD_SLOT_SIZE = (SATA_FSL_MAX_CMDS * SATA_FSL_CMD_HDR_SIZE), |
| |
| /* |
| * SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and |
| * chained indirect PRDEs up to a max count of 63. |
| * We are allocating an array of 63 PRDEs contiguously, but PRDE#15 will |
| * be setup as an indirect descriptor, pointing to it's next |
| * (contiguous) PRDE. Though chained indirect PRDE arrays are |
| * supported,it will be more efficient to use a direct PRDT and |
| * a single chain/link to indirect PRDE array/PRDT. |
| */ |
| |
| SATA_FSL_CMD_DESC_CFIS_SZ = 32, |
| SATA_FSL_CMD_DESC_SFIS_SZ = 32, |
| SATA_FSL_CMD_DESC_ACMD_SZ = 16, |
| SATA_FSL_CMD_DESC_RSRVD = 16, |
| |
| SATA_FSL_CMD_DESC_SIZE = (SATA_FSL_CMD_DESC_CFIS_SZ + |
| SATA_FSL_CMD_DESC_SFIS_SZ + |
| SATA_FSL_CMD_DESC_ACMD_SZ + |
| SATA_FSL_CMD_DESC_RSRVD + |
| SATA_FSL_MAX_PRD * 16), |
| |
| SATA_FSL_CMD_DESC_OFFSET_TO_PRDT = |
| (SATA_FSL_CMD_DESC_CFIS_SZ + |
| SATA_FSL_CMD_DESC_SFIS_SZ + |
| SATA_FSL_CMD_DESC_ACMD_SZ + |
| SATA_FSL_CMD_DESC_RSRVD), |
| |
| SATA_FSL_CMD_DESC_AR_SZ = (SATA_FSL_CMD_DESC_SIZE * SATA_FSL_MAX_CMDS), |
| SATA_FSL_PORT_PRIV_DMA_SZ = (SATA_FSL_CMD_SLOT_SIZE + |
| SATA_FSL_CMD_DESC_AR_SZ), |
| |
| /* |
| * MPC8315 has two SATA controllers, SATA1 & SATA2 |
| * (one port per controller) |
| * MPC837x has 2/4 controllers, one port per controller |
| */ |
| |
| SATA_FSL_MAX_PORTS = 1, |
| |
| SATA_FSL_IRQ_FLAG = IRQF_SHARED, |
| }; |
| |
| /* |
| * Interrupt Coalescing Control Register bitdefs */ |
| enum { |
| ICC_MIN_INT_COUNT_THRESHOLD = 1, |
| ICC_MAX_INT_COUNT_THRESHOLD = ((1 << 5) - 1), |
| ICC_MIN_INT_TICKS_THRESHOLD = 0, |
| ICC_MAX_INT_TICKS_THRESHOLD = ((1 << 19) - 1), |
| ICC_SAFE_INT_TICKS = 1, |
| }; |
| |
| /* |
| * Host Controller command register set - per port |
| */ |
| enum { |
| CQ = 0, |
| CA = 8, |
| CC = 0x10, |
| CE = 0x18, |
| DE = 0x20, |
| CHBA = 0x24, |
| HSTATUS = 0x28, |
| HCONTROL = 0x2C, |
| CQPMP = 0x30, |
| SIGNATURE = 0x34, |
| ICC = 0x38, |
| |
| /* |
| * Host Status Register (HStatus) bitdefs |
| */ |
| ONLINE = (1 << 31), |
| GOING_OFFLINE = (1 << 30), |
| BIST_ERR = (1 << 29), |
| CLEAR_ERROR = (1 << 27), |
| |
| FATAL_ERR_HC_MASTER_ERR = (1 << 18), |
| FATAL_ERR_PARITY_ERR_TX = (1 << 17), |
| FATAL_ERR_PARITY_ERR_RX = (1 << 16), |
| FATAL_ERR_DATA_UNDERRUN = (1 << 13), |
| FATAL_ERR_DATA_OVERRUN = (1 << 12), |
| FATAL_ERR_CRC_ERR_TX = (1 << 11), |
| FATAL_ERR_CRC_ERR_RX = (1 << 10), |
| FATAL_ERR_FIFO_OVRFL_TX = (1 << 9), |
| FATAL_ERR_FIFO_OVRFL_RX = (1 << 8), |
| |
| FATAL_ERROR_DECODE = FATAL_ERR_HC_MASTER_ERR | |
| FATAL_ERR_PARITY_ERR_TX | |
| FATAL_ERR_PARITY_ERR_RX | |
| FATAL_ERR_DATA_UNDERRUN | |
| FATAL_ERR_DATA_OVERRUN | |
| FATAL_ERR_CRC_ERR_TX | |
| FATAL_ERR_CRC_ERR_RX | |
| FATAL_ERR_FIFO_OVRFL_TX | FATAL_ERR_FIFO_OVRFL_RX, |
| |
| INT_ON_DATA_LENGTH_MISMATCH = (1 << 12), |
| INT_ON_FATAL_ERR = (1 << 5), |
| INT_ON_PHYRDY_CHG = (1 << 4), |
| |
| INT_ON_SIGNATURE_UPDATE = (1 << 3), |
| INT_ON_SNOTIFY_UPDATE = (1 << 2), |
| INT_ON_SINGL_DEVICE_ERR = (1 << 1), |
| INT_ON_CMD_COMPLETE = 1, |
| |
| INT_ON_ERROR = INT_ON_FATAL_ERR | INT_ON_SNOTIFY_UPDATE | |
| INT_ON_PHYRDY_CHG | INT_ON_SINGL_DEVICE_ERR, |
| |
| /* |
| * Host Control Register (HControl) bitdefs |
| */ |
| HCONTROL_ONLINE_PHY_RST = (1 << 31), |
| HCONTROL_FORCE_OFFLINE = (1 << 30), |
| HCONTROL_LEGACY = (1 << 28), |
| HCONTROL_PARITY_PROT_MOD = (1 << 14), |
| HCONTROL_DPATH_PARITY = (1 << 12), |
| HCONTROL_SNOOP_ENABLE = (1 << 10), |
| HCONTROL_PMP_ATTACHED = (1 << 9), |
| HCONTROL_COPYOUT_STATFIS = (1 << 8), |
| IE_ON_FATAL_ERR = (1 << 5), |
| IE_ON_PHYRDY_CHG = (1 << 4), |
| IE_ON_SIGNATURE_UPDATE = (1 << 3), |
| IE_ON_SNOTIFY_UPDATE = (1 << 2), |
| IE_ON_SINGL_DEVICE_ERR = (1 << 1), |
| IE_ON_CMD_COMPLETE = 1, |
| |
| DEFAULT_PORT_IRQ_ENABLE_MASK = IE_ON_FATAL_ERR | IE_ON_PHYRDY_CHG | |
| IE_ON_SIGNATURE_UPDATE | IE_ON_SNOTIFY_UPDATE | |
| IE_ON_SINGL_DEVICE_ERR | IE_ON_CMD_COMPLETE, |
| |
| EXT_INDIRECT_SEG_PRD_FLAG = (1 << 31), |
| DATA_SNOOP_ENABLE_V1 = (1 << 22), |
| DATA_SNOOP_ENABLE_V2 = (1 << 28), |
| }; |
| |
| /* |
| * SATA Superset Registers |
| */ |
| enum { |
| SSTATUS = 0, |
| SERROR = 4, |
| SCONTROL = 8, |
| SNOTIFY = 0xC, |
| }; |
| |
| /* |
| * Control Status Register Set |
| */ |
| enum { |
| TRANSCFG = 0, |
| TRANSSTATUS = 4, |
| LINKCFG = 8, |
| LINKCFG1 = 0xC, |
| LINKCFG2 = 0x10, |
| LINKSTATUS = 0x14, |
| LINKSTATUS1 = 0x18, |
| PHYCTRLCFG = 0x1C, |
| COMMANDSTAT = 0x20, |
| }; |
| |
| /* TRANSCFG (transport-layer) configuration control */ |
| enum { |
| TRANSCFG_RX_WATER_MARK = (1 << 4), |
| }; |
| |
| /* PHY (link-layer) configuration control */ |
| enum { |
| PHY_BIST_ENABLE = 0x01, |
| }; |
| |
| /* |
| * Command Header Table entry, i.e, command slot |
| * 4 Dwords per command slot, command header size == 64 Dwords. |
| */ |
| struct cmdhdr_tbl_entry { |
| u32 cda; |
| u32 prde_fis_len; |
| u32 ttl; |
| u32 desc_info; |
| }; |
| |
| /* |
| * Description information bitdefs |
| */ |
| enum { |
| CMD_DESC_RES = (1 << 11), |
| VENDOR_SPECIFIC_BIST = (1 << 10), |
| CMD_DESC_SNOOP_ENABLE = (1 << 9), |
| FPDMA_QUEUED_CMD = (1 << 8), |
| SRST_CMD = (1 << 7), |
| BIST = (1 << 6), |
| ATAPI_CMD = (1 << 5), |
| }; |
| |
| /* |
| * Command Descriptor |
| */ |
| struct command_desc { |
| u8 cfis[8 * 4]; |
| u8 sfis[8 * 4]; |
| u8 acmd[4 * 4]; |
| u8 fill[4 * 4]; |
| u32 prdt[SATA_FSL_MAX_PRD_DIRECT * 4]; |
| u32 prdt_indirect[(SATA_FSL_MAX_PRD - SATA_FSL_MAX_PRD_DIRECT) * 4]; |
| }; |
| |
| /* |
| * Physical region table descriptor(PRD) |
| */ |
| |
| struct prde { |
| u32 dba; |
| u8 fill[2 * 4]; |
| u32 ddc_and_ext; |
| }; |
| |
| /* |
| * ata_port private data |
| * This is our per-port instance data. |
| */ |
| struct sata_fsl_port_priv { |
| struct cmdhdr_tbl_entry *cmdslot; |
| dma_addr_t cmdslot_paddr; |
| struct command_desc *cmdentry; |
| dma_addr_t cmdentry_paddr; |
| }; |
| |
| /* |
| * ata_port->host_set private data |
| */ |
| struct sata_fsl_host_priv { |
| void __iomem *hcr_base; |
| void __iomem *ssr_base; |
| void __iomem *csr_base; |
| int irq; |
| int data_snoop; |
| struct device_attribute intr_coalescing; |
| struct device_attribute rx_watermark; |
| }; |
| |
| static void fsl_sata_set_irq_coalescing(struct ata_host *host, |
| unsigned int count, unsigned int ticks) |
| { |
| struct sata_fsl_host_priv *host_priv = host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| unsigned long flags; |
| |
| if (count > ICC_MAX_INT_COUNT_THRESHOLD) |
| count = ICC_MAX_INT_COUNT_THRESHOLD; |
| else if (count < ICC_MIN_INT_COUNT_THRESHOLD) |
| count = ICC_MIN_INT_COUNT_THRESHOLD; |
| |
| if (ticks > ICC_MAX_INT_TICKS_THRESHOLD) |
| ticks = ICC_MAX_INT_TICKS_THRESHOLD; |
| else if ((ICC_MIN_INT_TICKS_THRESHOLD == ticks) && |
| (count > ICC_MIN_INT_COUNT_THRESHOLD)) |
| ticks = ICC_SAFE_INT_TICKS; |
| |
| spin_lock_irqsave(&host->lock, flags); |
| iowrite32((count << 24 | ticks), hcr_base + ICC); |
| |
| intr_coalescing_count = count; |
| intr_coalescing_ticks = ticks; |
| spin_unlock_irqrestore(&host->lock, flags); |
| |
| DPRINTK("interrupt coalescing, count = 0x%x, ticks = %x\n", |
| intr_coalescing_count, intr_coalescing_ticks); |
| DPRINTK("ICC register status: (hcr base: 0x%x) = 0x%x\n", |
| hcr_base, ioread32(hcr_base + ICC)); |
| } |
| |
| static ssize_t fsl_sata_intr_coalescing_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%d %d\n", |
| intr_coalescing_count, intr_coalescing_ticks); |
| } |
| |
| static ssize_t fsl_sata_intr_coalescing_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| unsigned int coalescing_count, coalescing_ticks; |
| |
| if (sscanf(buf, "%d%d", |
| &coalescing_count, |
| &coalescing_ticks) != 2) { |
| printk(KERN_ERR "fsl-sata: wrong parameter format.\n"); |
| return -EINVAL; |
| } |
| |
| fsl_sata_set_irq_coalescing(dev_get_drvdata(dev), |
| coalescing_count, coalescing_ticks); |
| |
| return strlen(buf); |
| } |
| |
| static ssize_t fsl_sata_rx_watermark_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| unsigned int rx_watermark; |
| unsigned long flags; |
| struct ata_host *host = dev_get_drvdata(dev); |
| struct sata_fsl_host_priv *host_priv = host->private_data; |
| void __iomem *csr_base = host_priv->csr_base; |
| |
| spin_lock_irqsave(&host->lock, flags); |
| rx_watermark = ioread32(csr_base + TRANSCFG); |
| rx_watermark &= 0x1f; |
| |
| spin_unlock_irqrestore(&host->lock, flags); |
| return sprintf(buf, "%d\n", rx_watermark); |
| } |
| |
| static ssize_t fsl_sata_rx_watermark_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| unsigned int rx_watermark; |
| unsigned long flags; |
| struct ata_host *host = dev_get_drvdata(dev); |
| struct sata_fsl_host_priv *host_priv = host->private_data; |
| void __iomem *csr_base = host_priv->csr_base; |
| u32 temp; |
| |
| if (sscanf(buf, "%d", &rx_watermark) != 1) { |
| printk(KERN_ERR "fsl-sata: wrong parameter format.\n"); |
| return -EINVAL; |
| } |
| |
| spin_lock_irqsave(&host->lock, flags); |
| temp = ioread32(csr_base + TRANSCFG); |
| temp &= 0xffffffe0; |
| iowrite32(temp | rx_watermark, csr_base + TRANSCFG); |
| |
| spin_unlock_irqrestore(&host->lock, flags); |
| return strlen(buf); |
| } |
| |
| static inline unsigned int sata_fsl_tag(unsigned int tag, |
| void __iomem *hcr_base) |
| { |
| /* We let libATA core do actual (queue) tag allocation */ |
| |
| /* all non NCQ/queued commands should have tag#0 */ |
| if (ata_tag_internal(tag)) { |
| DPRINTK("mapping internal cmds to tag#0\n"); |
| return 0; |
| } |
| |
| if (unlikely(tag >= SATA_FSL_QUEUE_DEPTH)) { |
| DPRINTK("tag %d invalid : out of range\n", tag); |
| return 0; |
| } |
| |
| if (unlikely((ioread32(hcr_base + CQ)) & (1 << tag))) { |
| DPRINTK("tag %d invalid : in use!!\n", tag); |
| return 0; |
| } |
| |
| return tag; |
| } |
| |
| static void sata_fsl_setup_cmd_hdr_entry(struct sata_fsl_port_priv *pp, |
| unsigned int tag, u32 desc_info, |
| u32 data_xfer_len, u8 num_prde, |
| u8 fis_len) |
| { |
| dma_addr_t cmd_descriptor_address; |
| |
| cmd_descriptor_address = pp->cmdentry_paddr + |
| tag * SATA_FSL_CMD_DESC_SIZE; |
| |
| /* NOTE: both data_xfer_len & fis_len are Dword counts */ |
| |
| pp->cmdslot[tag].cda = cpu_to_le32(cmd_descriptor_address); |
| pp->cmdslot[tag].prde_fis_len = |
| cpu_to_le32((num_prde << 16) | (fis_len << 2)); |
| pp->cmdslot[tag].ttl = cpu_to_le32(data_xfer_len & ~0x03); |
| pp->cmdslot[tag].desc_info = cpu_to_le32(desc_info | (tag & 0x1F)); |
| |
| VPRINTK("cda=0x%x, prde_fis_len=0x%x, ttl=0x%x, di=0x%x\n", |
| pp->cmdslot[tag].cda, |
| pp->cmdslot[tag].prde_fis_len, |
| pp->cmdslot[tag].ttl, pp->cmdslot[tag].desc_info); |
| |
| } |
| |
| static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc, |
| u32 *ttl, dma_addr_t cmd_desc_paddr, |
| int data_snoop) |
| { |
| struct scatterlist *sg; |
| unsigned int num_prde = 0; |
| u32 ttl_dwords = 0; |
| |
| /* |
| * NOTE : direct & indirect prdt's are contiguously allocated |
| */ |
| struct prde *prd = (struct prde *)&((struct command_desc *) |
| cmd_desc)->prdt; |
| |
| struct prde *prd_ptr_to_indirect_ext = NULL; |
| unsigned indirect_ext_segment_sz = 0; |
| dma_addr_t indirect_ext_segment_paddr; |
| unsigned int si; |
| |
| VPRINTK("SATA FSL : cd = 0x%p, prd = 0x%p\n", cmd_desc, prd); |
| |
| indirect_ext_segment_paddr = cmd_desc_paddr + |
| SATA_FSL_CMD_DESC_OFFSET_TO_PRDT + SATA_FSL_MAX_PRD_DIRECT * 16; |
| |
| for_each_sg(qc->sg, sg, qc->n_elem, si) { |
| dma_addr_t sg_addr = sg_dma_address(sg); |
| u32 sg_len = sg_dma_len(sg); |
| |
| VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%llx, sg_len = %d\n", |
| (unsigned long long)sg_addr, sg_len); |
| |
| /* warn if each s/g element is not dword aligned */ |
| if (unlikely(sg_addr & 0x03)) |
| ata_port_err(qc->ap, "s/g addr unaligned : 0x%llx\n", |
| (unsigned long long)sg_addr); |
| if (unlikely(sg_len & 0x03)) |
| ata_port_err(qc->ap, "s/g len unaligned : 0x%x\n", |
| sg_len); |
| |
| if (num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1) && |
| sg_next(sg) != NULL) { |
| VPRINTK("setting indirect prde\n"); |
| prd_ptr_to_indirect_ext = prd; |
| prd->dba = cpu_to_le32(indirect_ext_segment_paddr); |
| indirect_ext_segment_sz = 0; |
| ++prd; |
| ++num_prde; |
| } |
| |
| ttl_dwords += sg_len; |
| prd->dba = cpu_to_le32(sg_addr); |
| prd->ddc_and_ext = cpu_to_le32(data_snoop | (sg_len & ~0x03)); |
| |
| VPRINTK("sg_fill, ttl=%d, dba=0x%x, ddc=0x%x\n", |
| ttl_dwords, prd->dba, prd->ddc_and_ext); |
| |
| ++num_prde; |
| ++prd; |
| if (prd_ptr_to_indirect_ext) |
| indirect_ext_segment_sz += sg_len; |
| } |
| |
| if (prd_ptr_to_indirect_ext) { |
| /* set indirect extension flag along with indirect ext. size */ |
| prd_ptr_to_indirect_ext->ddc_and_ext = |
| cpu_to_le32((EXT_INDIRECT_SEG_PRD_FLAG | |
| data_snoop | |
| (indirect_ext_segment_sz & ~0x03))); |
| } |
| |
| *ttl = ttl_dwords; |
| return num_prde; |
| } |
| |
| static void sata_fsl_qc_prep(struct ata_queued_cmd *qc) |
| { |
| struct ata_port *ap = qc->ap; |
| struct sata_fsl_port_priv *pp = ap->private_data; |
| struct sata_fsl_host_priv *host_priv = ap->host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| unsigned int tag = sata_fsl_tag(qc->tag, hcr_base); |
| struct command_desc *cd; |
| u32 desc_info = CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE; |
| u32 num_prde = 0; |
| u32 ttl_dwords = 0; |
| dma_addr_t cd_paddr; |
| |
| cd = (struct command_desc *)pp->cmdentry + tag; |
| cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE; |
| |
| ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *) &cd->cfis); |
| |
| VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n", |
| cd->cfis[0], cd->cfis[1], cd->cfis[2]); |
| |
| if (qc->tf.protocol == ATA_PROT_NCQ) { |
| VPRINTK("FPDMA xfer,Sctor cnt[0:7],[8:15] = %d,%d\n", |
| cd->cfis[3], cd->cfis[11]); |
| } |
| |
| /* setup "ACMD - atapi command" in cmd. desc. if this is ATAPI cmd */ |
| if (ata_is_atapi(qc->tf.protocol)) { |
| desc_info |= ATAPI_CMD; |
| memset((void *)&cd->acmd, 0, 32); |
| memcpy((void *)&cd->acmd, qc->cdb, qc->dev->cdb_len); |
| } |
| |
| if (qc->flags & ATA_QCFLAG_DMAMAP) |
| num_prde = sata_fsl_fill_sg(qc, (void *)cd, |
| &ttl_dwords, cd_paddr, |
| host_priv->data_snoop); |
| |
| if (qc->tf.protocol == ATA_PROT_NCQ) |
| desc_info |= FPDMA_QUEUED_CMD; |
| |
| sata_fsl_setup_cmd_hdr_entry(pp, tag, desc_info, ttl_dwords, |
| num_prde, 5); |
| |
| VPRINTK("SATA FSL : xx_qc_prep, di = 0x%x, ttl = %d, num_prde = %d\n", |
| desc_info, ttl_dwords, num_prde); |
| } |
| |
| static unsigned int sata_fsl_qc_issue(struct ata_queued_cmd *qc) |
| { |
| struct ata_port *ap = qc->ap; |
| struct sata_fsl_host_priv *host_priv = ap->host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| unsigned int tag = sata_fsl_tag(qc->tag, hcr_base); |
| |
| VPRINTK("xx_qc_issue called,CQ=0x%x,CA=0x%x,CE=0x%x,CC=0x%x\n", |
| ioread32(CQ + hcr_base), |
| ioread32(CA + hcr_base), |
| ioread32(CE + hcr_base), ioread32(CC + hcr_base)); |
| |
| iowrite32(qc->dev->link->pmp, CQPMP + hcr_base); |
| |
| /* Simply queue command to the controller/device */ |
| iowrite32(1 << tag, CQ + hcr_base); |
| |
| VPRINTK("xx_qc_issue called, tag=%d, CQ=0x%x, CA=0x%x\n", |
| tag, ioread32(CQ + hcr_base), ioread32(CA + hcr_base)); |
| |
| VPRINTK("CE=0x%x, DE=0x%x, CC=0x%x, CmdStat = 0x%x\n", |
| ioread32(CE + hcr_base), |
| ioread32(DE + hcr_base), |
| ioread32(CC + hcr_base), |
| ioread32(COMMANDSTAT + host_priv->csr_base)); |
| |
| return 0; |
| } |
| |
| static bool sata_fsl_qc_fill_rtf(struct ata_queued_cmd *qc) |
| { |
| struct sata_fsl_port_priv *pp = qc->ap->private_data; |
| struct sata_fsl_host_priv *host_priv = qc->ap->host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| unsigned int tag = sata_fsl_tag(qc->tag, hcr_base); |
| struct command_desc *cd; |
| |
| cd = pp->cmdentry + tag; |
| |
| ata_tf_from_fis(cd->sfis, &qc->result_tf); |
| return true; |
| } |
| |
| static int sata_fsl_scr_write(struct ata_link *link, |
| unsigned int sc_reg_in, u32 val) |
| { |
| struct sata_fsl_host_priv *host_priv = link->ap->host->private_data; |
| void __iomem *ssr_base = host_priv->ssr_base; |
| unsigned int sc_reg; |
| |
| switch (sc_reg_in) { |
| case SCR_STATUS: |
| case SCR_ERROR: |
| case SCR_CONTROL: |
| case SCR_ACTIVE: |
| sc_reg = sc_reg_in; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| VPRINTK("xx_scr_write, reg_in = %d\n", sc_reg); |
| |
| iowrite32(val, ssr_base + (sc_reg * 4)); |
| return 0; |
| } |
| |
| static int sata_fsl_scr_read(struct ata_link *link, |
| unsigned int sc_reg_in, u32 *val) |
| { |
| struct sata_fsl_host_priv *host_priv = link->ap->host->private_data; |
| void __iomem *ssr_base = host_priv->ssr_base; |
| unsigned int sc_reg; |
| |
| switch (sc_reg_in) { |
| case SCR_STATUS: |
| case SCR_ERROR: |
| case SCR_CONTROL: |
| case SCR_ACTIVE: |
| sc_reg = sc_reg_in; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| VPRINTK("xx_scr_read, reg_in = %d\n", sc_reg); |
| |
| *val = ioread32(ssr_base + (sc_reg * 4)); |
| return 0; |
| } |
| |
| static void sata_fsl_freeze(struct ata_port *ap) |
| { |
| struct sata_fsl_host_priv *host_priv = ap->host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| u32 temp; |
| |
| VPRINTK("xx_freeze, CQ=0x%x, CA=0x%x, CE=0x%x, DE=0x%x\n", |
| ioread32(CQ + hcr_base), |
| ioread32(CA + hcr_base), |
| ioread32(CE + hcr_base), ioread32(DE + hcr_base)); |
| VPRINTK("CmdStat = 0x%x\n", |
| ioread32(host_priv->csr_base + COMMANDSTAT)); |
| |
| /* disable interrupts on the controller/port */ |
| temp = ioread32(hcr_base + HCONTROL); |
| iowrite32((temp & ~0x3F), hcr_base + HCONTROL); |
| |
| VPRINTK("in xx_freeze : HControl = 0x%x, HStatus = 0x%x\n", |
| ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS)); |
| } |
| |
| static void sata_fsl_thaw(struct ata_port *ap) |
| { |
| struct sata_fsl_host_priv *host_priv = ap->host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| u32 temp; |
| |
| /* ack. any pending IRQs for this controller/port */ |
| temp = ioread32(hcr_base + HSTATUS); |
| |
| VPRINTK("xx_thaw, pending IRQs = 0x%x\n", (temp & 0x3F)); |
| |
| if (temp & 0x3F) |
| iowrite32((temp & 0x3F), hcr_base + HSTATUS); |
| |
| /* enable interrupts on the controller/port */ |
| temp = ioread32(hcr_base + HCONTROL); |
| iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL); |
| |
| VPRINTK("xx_thaw : HControl = 0x%x, HStatus = 0x%x\n", |
| ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS)); |
| } |
| |
| static void sata_fsl_pmp_attach(struct ata_port *ap) |
| { |
| struct sata_fsl_host_priv *host_priv = ap->host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| u32 temp; |
| |
| temp = ioread32(hcr_base + HCONTROL); |
| iowrite32((temp | HCONTROL_PMP_ATTACHED), hcr_base + HCONTROL); |
| } |
| |
| static void sata_fsl_pmp_detach(struct ata_port *ap) |
| { |
| struct sata_fsl_host_priv *host_priv = ap->host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| u32 temp; |
| |
| temp = ioread32(hcr_base + HCONTROL); |
| temp &= ~HCONTROL_PMP_ATTACHED; |
| iowrite32(temp, hcr_base + HCONTROL); |
| |
| /* enable interrupts on the controller/port */ |
| temp = ioread32(hcr_base + HCONTROL); |
| iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL); |
| |
| } |
| |
| static int sata_fsl_port_start(struct ata_port *ap) |
| { |
| struct device *dev = ap->host->dev; |
| struct sata_fsl_port_priv *pp; |
| void *mem; |
| dma_addr_t mem_dma; |
| struct sata_fsl_host_priv *host_priv = ap->host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| u32 temp; |
| |
| pp = kzalloc(sizeof(*pp), GFP_KERNEL); |
| if (!pp) |
| return -ENOMEM; |
| |
| mem = dma_zalloc_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, &mem_dma, |
| GFP_KERNEL); |
| if (!mem) { |
| kfree(pp); |
| return -ENOMEM; |
| } |
| |
| pp->cmdslot = mem; |
| pp->cmdslot_paddr = mem_dma; |
| |
| mem += SATA_FSL_CMD_SLOT_SIZE; |
| mem_dma += SATA_FSL_CMD_SLOT_SIZE; |
| |
| pp->cmdentry = mem; |
| pp->cmdentry_paddr = mem_dma; |
| |
| ap->private_data = pp; |
| |
| VPRINTK("CHBA = 0x%x, cmdentry_phys = 0x%x\n", |
| pp->cmdslot_paddr, pp->cmdentry_paddr); |
| |
| /* Now, update the CHBA register in host controller cmd register set */ |
| iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA); |
| |
| /* |
| * Now, we can bring the controller on-line & also initiate |
| * the COMINIT sequence, we simply return here and the boot-probing |
| * & device discovery process is re-initiated by libATA using a |
| * Softreset EH (dummy) session. Hence, boot probing and device |
| * discovey will be part of sata_fsl_softreset() callback. |
| */ |
| |
| temp = ioread32(hcr_base + HCONTROL); |
| iowrite32((temp | HCONTROL_ONLINE_PHY_RST), hcr_base + HCONTROL); |
| |
| VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); |
| VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); |
| VPRINTK("CHBA = 0x%x\n", ioread32(hcr_base + CHBA)); |
| |
| return 0; |
| } |
| |
| static void sata_fsl_port_stop(struct ata_port *ap) |
| { |
| struct device *dev = ap->host->dev; |
| struct sata_fsl_port_priv *pp = ap->private_data; |
| struct sata_fsl_host_priv *host_priv = ap->host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| u32 temp; |
| |
| /* |
| * Force host controller to go off-line, aborting current operations |
| */ |
| temp = ioread32(hcr_base + HCONTROL); |
| temp &= ~HCONTROL_ONLINE_PHY_RST; |
| temp |= HCONTROL_FORCE_OFFLINE; |
| iowrite32(temp, hcr_base + HCONTROL); |
| |
| /* Poll for controller to go offline - should happen immediately */ |
| ata_wait_register(ap, hcr_base + HSTATUS, ONLINE, ONLINE, 1, 1); |
| |
| ap->private_data = NULL; |
| dma_free_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, |
| pp->cmdslot, pp->cmdslot_paddr); |
| |
| kfree(pp); |
| } |
| |
| static unsigned int sata_fsl_dev_classify(struct ata_port *ap) |
| { |
| struct sata_fsl_host_priv *host_priv = ap->host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| struct ata_taskfile tf; |
| u32 temp; |
| |
| temp = ioread32(hcr_base + SIGNATURE); |
| |
| VPRINTK("raw sig = 0x%x\n", temp); |
| VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); |
| VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); |
| |
| tf.lbah = (temp >> 24) & 0xff; |
| tf.lbam = (temp >> 16) & 0xff; |
| tf.lbal = (temp >> 8) & 0xff; |
| tf.nsect = temp & 0xff; |
| |
| return ata_dev_classify(&tf); |
| } |
| |
| static int sata_fsl_hardreset(struct ata_link *link, unsigned int *class, |
| unsigned long deadline) |
| { |
| struct ata_port *ap = link->ap; |
| struct sata_fsl_host_priv *host_priv = ap->host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| u32 temp; |
| int i = 0; |
| unsigned long start_jiffies; |
| |
| DPRINTK("in xx_hardreset\n"); |
| |
| try_offline_again: |
| /* |
| * Force host controller to go off-line, aborting current operations |
| */ |
| temp = ioread32(hcr_base + HCONTROL); |
| temp &= ~HCONTROL_ONLINE_PHY_RST; |
| iowrite32(temp, hcr_base + HCONTROL); |
| |
| /* Poll for controller to go offline */ |
| temp = ata_wait_register(ap, hcr_base + HSTATUS, ONLINE, ONLINE, |
| 1, 500); |
| |
| if (temp & ONLINE) { |
| ata_port_err(ap, "Hardreset failed, not off-lined %d\n", i); |
| |
| /* |
| * Try to offline controller atleast twice |
| */ |
| i++; |
| if (i == 2) |
| goto err; |
| else |
| goto try_offline_again; |
| } |
| |
| DPRINTK("hardreset, controller off-lined\n"); |
| VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); |
| VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); |
| |
| /* |
| * PHY reset should remain asserted for atleast 1ms |
| */ |
| ata_msleep(ap, 1); |
| |
| sata_set_spd(link); |
| |
| /* |
| * Now, bring the host controller online again, this can take time |
| * as PHY reset and communication establishment, 1st D2H FIS and |
| * device signature update is done, on safe side assume 500ms |
| * NOTE : Host online status may be indicated immediately!! |
| */ |
| |
| temp = ioread32(hcr_base + HCONTROL); |
| temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE); |
| temp |= HCONTROL_PMP_ATTACHED; |
| iowrite32(temp, hcr_base + HCONTROL); |
| |
| temp = ata_wait_register(ap, hcr_base + HSTATUS, ONLINE, 0, 1, 500); |
| |
| if (!(temp & ONLINE)) { |
| ata_port_err(ap, "Hardreset failed, not on-lined\n"); |
| goto err; |
| } |
| |
| DPRINTK("hardreset, controller off-lined & on-lined\n"); |
| VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); |
| VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); |
| |
| /* |
| * First, wait for the PHYRDY change to occur before waiting for |
| * the signature, and also verify if SStatus indicates device |
| * presence |
| */ |
| |
| temp = ata_wait_register(ap, hcr_base + HSTATUS, 0xFF, 0, 1, 500); |
| if ((!(temp & 0x10)) || ata_link_offline(link)) { |
| ata_port_warn(ap, "No Device OR PHYRDY change,Hstatus = 0x%x\n", |
| ioread32(hcr_base + HSTATUS)); |
| *class = ATA_DEV_NONE; |
| return 0; |
| } |
| |
| /* |
| * Wait for the first D2H from device,i.e,signature update notification |
| */ |
| start_jiffies = jiffies; |
| temp = ata_wait_register(ap, hcr_base + HSTATUS, 0xFF, 0x10, |
| 500, jiffies_to_msecs(deadline - start_jiffies)); |
| |
| if ((temp & 0xFF) != 0x18) { |
| ata_port_warn(ap, "No Signature Update\n"); |
| *class = ATA_DEV_NONE; |
| goto do_followup_srst; |
| } else { |
| ata_port_info(ap, "Signature Update detected @ %d msecs\n", |
| jiffies_to_msecs(jiffies - start_jiffies)); |
| *class = sata_fsl_dev_classify(ap); |
| return 0; |
| } |
| |
| do_followup_srst: |
| /* |
| * request libATA to perform follow-up softreset |
| */ |
| return -EAGAIN; |
| |
| err: |
| return -EIO; |
| } |
| |
| static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, |
| unsigned long deadline) |
| { |
| struct ata_port *ap = link->ap; |
| struct sata_fsl_port_priv *pp = ap->private_data; |
| struct sata_fsl_host_priv *host_priv = ap->host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| int pmp = sata_srst_pmp(link); |
| u32 temp; |
| struct ata_taskfile tf; |
| u8 *cfis; |
| u32 Serror; |
| |
| DPRINTK("in xx_softreset\n"); |
| |
| if (ata_link_offline(link)) { |
| DPRINTK("PHY reports no device\n"); |
| *class = ATA_DEV_NONE; |
| return 0; |
| } |
| |
| /* |
| * Send a device reset (SRST) explicitly on command slot #0 |
| * Check : will the command queue (reg) be cleared during offlining ?? |
| * Also we will be online only if Phy commn. has been established |
| * and device presence has been detected, therefore if we have |
| * reached here, we can send a command to the target device |
| */ |
| |
| DPRINTK("Sending SRST/device reset\n"); |
| |
| ata_tf_init(link->device, &tf); |
| cfis = (u8 *) &pp->cmdentry->cfis; |
| |
| /* device reset/SRST is a control register update FIS, uses tag0 */ |
| sata_fsl_setup_cmd_hdr_entry(pp, 0, |
| SRST_CMD | CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, 0, 0, 5); |
| |
| tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */ |
| ata_tf_to_fis(&tf, pmp, 0, cfis); |
| |
| DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n", |
| cfis[0], cfis[1], cfis[2], cfis[3]); |
| |
| /* |
| * Queue SRST command to the controller/device, ensure that no |
| * other commands are active on the controller/device |
| */ |
| |
| DPRINTK("@Softreset, CQ = 0x%x, CA = 0x%x, CC = 0x%x\n", |
| ioread32(CQ + hcr_base), |
| ioread32(CA + hcr_base), ioread32(CC + hcr_base)); |
| |
| iowrite32(0xFFFF, CC + hcr_base); |
| if (pmp != SATA_PMP_CTRL_PORT) |
| iowrite32(pmp, CQPMP + hcr_base); |
| iowrite32(1, CQ + hcr_base); |
| |
| temp = ata_wait_register(ap, CQ + hcr_base, 0x1, 0x1, 1, 5000); |
| if (temp & 0x1) { |
| ata_port_warn(ap, "ATA_SRST issue failed\n"); |
| |
| DPRINTK("Softreset@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n", |
| ioread32(CQ + hcr_base), |
| ioread32(CA + hcr_base), ioread32(CC + hcr_base)); |
| |
| sata_fsl_scr_read(&ap->link, SCR_ERROR, &Serror); |
| |
| DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); |
| DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); |
| DPRINTK("Serror = 0x%x\n", Serror); |
| goto err; |
| } |
| |
| ata_msleep(ap, 1); |
| |
| /* |
| * SATA device enters reset state after receiving a Control register |
| * FIS with SRST bit asserted and it awaits another H2D Control reg. |
| * FIS with SRST bit cleared, then the device does internal diags & |
| * initialization, followed by indicating it's initialization status |
| * using ATA signature D2H register FIS to the host controller. |
| */ |
| |
| sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, |
| 0, 0, 5); |
| |
| tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */ |
| ata_tf_to_fis(&tf, pmp, 0, cfis); |
| |
| if (pmp != SATA_PMP_CTRL_PORT) |
| iowrite32(pmp, CQPMP + hcr_base); |
| iowrite32(1, CQ + hcr_base); |
| ata_msleep(ap, 150); /* ?? */ |
| |
| /* |
| * The above command would have signalled an interrupt on command |
| * complete, which needs special handling, by clearing the Nth |
| * command bit of the CCreg |
| */ |
| iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */ |
| |
| DPRINTK("SATA FSL : Now checking device signature\n"); |
| |
| *class = ATA_DEV_NONE; |
| |
| /* Verify if SStatus indicates device presence */ |
| if (ata_link_online(link)) { |
| /* |
| * if we are here, device presence has been detected, |
| * 1st D2H FIS would have been received, but sfis in |
| * command desc. is not updated, but signature register |
| * would have been updated |
| */ |
| |
| *class = sata_fsl_dev_classify(ap); |
| |
| DPRINTK("class = %d\n", *class); |
| VPRINTK("ccreg = 0x%x\n", ioread32(hcr_base + CC)); |
| VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE)); |
| } |
| |
| return 0; |
| |
| err: |
| return -EIO; |
| } |
| |
| static void sata_fsl_error_handler(struct ata_port *ap) |
| { |
| |
| DPRINTK("in xx_error_handler\n"); |
| sata_pmp_error_handler(ap); |
| |
| } |
| |
| static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc) |
| { |
| if (qc->flags & ATA_QCFLAG_FAILED) |
| qc->err_mask |= AC_ERR_OTHER; |
| |
| if (qc->err_mask) { |
| /* make DMA engine forget about the failed command */ |
| |
| } |
| } |
| |
| static void sata_fsl_error_intr(struct ata_port *ap) |
| { |
| struct sata_fsl_host_priv *host_priv = ap->host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| u32 hstatus, dereg=0, cereg = 0, SError = 0; |
| unsigned int err_mask = 0, action = 0; |
| int freeze = 0, abort=0; |
| struct ata_link *link = NULL; |
| struct ata_queued_cmd *qc = NULL; |
| struct ata_eh_info *ehi; |
| |
| hstatus = ioread32(hcr_base + HSTATUS); |
| cereg = ioread32(hcr_base + CE); |
| |
| /* first, analyze and record host port events */ |
| link = &ap->link; |
| ehi = &link->eh_info; |
| ata_ehi_clear_desc(ehi); |
| |
| /* |
| * Handle & Clear SError |
| */ |
| |
| sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError); |
| if (unlikely(SError & 0xFFFF0000)) |
| sata_fsl_scr_write(&ap->link, SCR_ERROR, SError); |
| |
| DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n", |
| hstatus, cereg, ioread32(hcr_base + DE), SError); |
| |
| /* handle fatal errors */ |
| if (hstatus & FATAL_ERROR_DECODE) { |
| ehi->err_mask |= AC_ERR_ATA_BUS; |
| ehi->action |= ATA_EH_SOFTRESET; |
| |
| freeze = 1; |
| } |
| |
| /* Handle SDB FIS receive & notify update */ |
| if (hstatus & INT_ON_SNOTIFY_UPDATE) |
| sata_async_notification(ap); |
| |
| /* Handle PHYRDY change notification */ |
| if (hstatus & INT_ON_PHYRDY_CHG) { |
| DPRINTK("SATA FSL: PHYRDY change indication\n"); |
| |
| /* Setup a soft-reset EH action */ |
| ata_ehi_hotplugged(ehi); |
| ata_ehi_push_desc(ehi, "%s", "PHY RDY changed"); |
| freeze = 1; |
| } |
| |
| /* handle single device errors */ |
| if (cereg) { |
| /* |
| * clear the command error, also clears queue to the device |
| * in error, and we can (re)issue commands to this device. |
| * When a device is in error all commands queued into the |
| * host controller and at the device are considered aborted |
| * and the queue for that device is stopped. Now, after |
| * clearing the device error, we can issue commands to the |
| * device to interrogate it to find the source of the error. |
| */ |
| abort = 1; |
| |
| DPRINTK("single device error, CE=0x%x, DE=0x%x\n", |
| ioread32(hcr_base + CE), ioread32(hcr_base + DE)); |
| |
| /* find out the offending link and qc */ |
| if (ap->nr_pmp_links) { |
| unsigned int dev_num; |
| |
| dereg = ioread32(hcr_base + DE); |
| iowrite32(dereg, hcr_base + DE); |
| iowrite32(cereg, hcr_base + CE); |
| |
| dev_num = ffs(dereg) - 1; |
| if (dev_num < ap->nr_pmp_links && dereg != 0) { |
| link = &ap->pmp_link[dev_num]; |
| ehi = &link->eh_info; |
| qc = ata_qc_from_tag(ap, link->active_tag); |
| /* |
| * We should consider this as non fatal error, |
| * and TF must be updated as done below. |
| */ |
| |
| err_mask |= AC_ERR_DEV; |
| |
| } else { |
| err_mask |= AC_ERR_HSM; |
| action |= ATA_EH_HARDRESET; |
| freeze = 1; |
| } |
| } else { |
| dereg = ioread32(hcr_base + DE); |
| iowrite32(dereg, hcr_base + DE); |
| iowrite32(cereg, hcr_base + CE); |
| |
| qc = ata_qc_from_tag(ap, link->active_tag); |
| /* |
| * We should consider this as non fatal error, |
| * and TF must be updated as done below. |
| */ |
| err_mask |= AC_ERR_DEV; |
| } |
| } |
| |
| /* record error info */ |
| if (qc) |
| qc->err_mask |= err_mask; |
| else |
| ehi->err_mask |= err_mask; |
| |
| ehi->action |= action; |
| |
| /* freeze or abort */ |
| if (freeze) |
| ata_port_freeze(ap); |
| else if (abort) { |
| if (qc) |
| ata_link_abort(qc->dev->link); |
| else |
| ata_port_abort(ap); |
| } |
| } |
| |
| static void sata_fsl_host_intr(struct ata_port *ap) |
| { |
| struct sata_fsl_host_priv *host_priv = ap->host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| u32 hstatus, done_mask = 0; |
| struct ata_queued_cmd *qc; |
| u32 SError; |
| u32 tag; |
| u32 status_mask = INT_ON_ERROR; |
| |
| hstatus = ioread32(hcr_base + HSTATUS); |
| |
| sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError); |
| |
| /* Read command completed register */ |
| done_mask = ioread32(hcr_base + CC); |
| |
| /* Workaround for data length mismatch errata */ |
| if (unlikely(hstatus & INT_ON_DATA_LENGTH_MISMATCH)) { |
| for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { |
| qc = ata_qc_from_tag(ap, tag); |
| if (qc && ata_is_atapi(qc->tf.protocol)) { |
| u32 hcontrol; |
| /* Set HControl[27] to clear error registers */ |
| hcontrol = ioread32(hcr_base + HCONTROL); |
| iowrite32(hcontrol | CLEAR_ERROR, |
| hcr_base + HCONTROL); |
| |
| /* Clear HControl[27] */ |
| iowrite32(hcontrol & ~CLEAR_ERROR, |
| hcr_base + HCONTROL); |
| |
| /* Clear SError[E] bit */ |
| sata_fsl_scr_write(&ap->link, SCR_ERROR, |
| SError); |
| |
| /* Ignore fatal error and device error */ |
| status_mask &= ~(INT_ON_SINGL_DEVICE_ERR |
| | INT_ON_FATAL_ERR); |
| break; |
| } |
| } |
| } |
| |
| if (unlikely(SError & 0xFFFF0000)) { |
| DPRINTK("serror @host_intr : 0x%x\n", SError); |
| sata_fsl_error_intr(ap); |
| } |
| |
| if (unlikely(hstatus & status_mask)) { |
| DPRINTK("error interrupt!!\n"); |
| sata_fsl_error_intr(ap); |
| return; |
| } |
| |
| VPRINTK("Status of all queues :\n"); |
| VPRINTK("done_mask/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n", |
| done_mask, |
| ioread32(hcr_base + CA), |
| ioread32(hcr_base + CE), |
| ioread32(hcr_base + CQ), |
| ap->qc_active); |
| |
| if (done_mask & ap->qc_active) { |
| int i; |
| /* clear CC bit, this will also complete the interrupt */ |
| iowrite32(done_mask, hcr_base + CC); |
| |
| DPRINTK("Status of all queues :\n"); |
| DPRINTK("done_mask/CC = 0x%x, CA = 0x%x, CE=0x%x\n", |
| done_mask, ioread32(hcr_base + CA), |
| ioread32(hcr_base + CE)); |
| |
| for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) { |
| if (done_mask & (1 << i)) |
| DPRINTK |
| ("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n", |
| i, ioread32(hcr_base + CC), |
| ioread32(hcr_base + CA)); |
| } |
| ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); |
| return; |
| |
| } else if ((ap->qc_active & (1 << ATA_TAG_INTERNAL))) { |
| iowrite32(1, hcr_base + CC); |
| qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL); |
| |
| DPRINTK("completing non-ncq cmd, CC=0x%x\n", |
| ioread32(hcr_base + CC)); |
| |
| if (qc) { |
| ata_qc_complete(qc); |
| } |
| } else { |
| /* Spurious Interrupt!! */ |
| DPRINTK("spurious interrupt!!, CC = 0x%x\n", |
| ioread32(hcr_base + CC)); |
| iowrite32(done_mask, hcr_base + CC); |
| return; |
| } |
| } |
| |
| static irqreturn_t sata_fsl_interrupt(int irq, void *dev_instance) |
| { |
| struct ata_host *host = dev_instance; |
| struct sata_fsl_host_priv *host_priv = host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| u32 interrupt_enables; |
| unsigned handled = 0; |
| struct ata_port *ap; |
| |
| /* ack. any pending IRQs for this controller/port */ |
| interrupt_enables = ioread32(hcr_base + HSTATUS); |
| interrupt_enables &= 0x3F; |
| |
| DPRINTK("interrupt status 0x%x\n", interrupt_enables); |
| |
| if (!interrupt_enables) |
| return IRQ_NONE; |
| |
| spin_lock(&host->lock); |
| |
| /* Assuming one port per host controller */ |
| |
| ap = host->ports[0]; |
| if (ap) { |
| sata_fsl_host_intr(ap); |
| } else { |
| dev_warn(host->dev, "interrupt on disabled port 0\n"); |
| } |
| |
| iowrite32(interrupt_enables, hcr_base + HSTATUS); |
| handled = 1; |
| |
| spin_unlock(&host->lock); |
| |
| return IRQ_RETVAL(handled); |
| } |
| |
| /* |
| * Multiple ports are represented by multiple SATA controllers with |
| * one port per controller |
| */ |
| static int sata_fsl_init_controller(struct ata_host *host) |
| { |
| struct sata_fsl_host_priv *host_priv = host->private_data; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| u32 temp; |
| |
| /* |
| * NOTE : We cannot bring the controller online before setting |
| * the CHBA, hence main controller initialization is done as |
| * part of the port_start() callback |
| */ |
| |
| /* sata controller to operate in enterprise mode */ |
| temp = ioread32(hcr_base + HCONTROL); |
| iowrite32(temp & ~HCONTROL_LEGACY, hcr_base + HCONTROL); |
| |
| /* ack. any pending IRQs for this controller/port */ |
| temp = ioread32(hcr_base + HSTATUS); |
| if (temp & 0x3F) |
| iowrite32((temp & 0x3F), hcr_base + HSTATUS); |
| |
| /* Keep interrupts disabled on the controller */ |
| temp = ioread32(hcr_base + HCONTROL); |
| iowrite32((temp & ~0x3F), hcr_base + HCONTROL); |
| |
| /* Disable interrupt coalescing control(icc), for the moment */ |
| DPRINTK("icc = 0x%x\n", ioread32(hcr_base + ICC)); |
| iowrite32(0x01000000, hcr_base + ICC); |
| |
| /* clear error registers, SError is cleared by libATA */ |
| iowrite32(0x00000FFFF, hcr_base + CE); |
| iowrite32(0x00000FFFF, hcr_base + DE); |
| |
| /* |
| * reset the number of command complete bits which will cause the |
| * interrupt to be signaled |
| */ |
| fsl_sata_set_irq_coalescing(host, intr_coalescing_count, |
| intr_coalescing_ticks); |
| |
| /* |
| * host controller will be brought on-line, during xx_port_start() |
| * callback, that should also initiate the OOB, COMINIT sequence |
| */ |
| |
| DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); |
| DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); |
| |
| return 0; |
| } |
| |
| /* |
| * scsi mid-layer and libata interface structures |
| */ |
| static struct scsi_host_template sata_fsl_sht = { |
| ATA_NCQ_SHT("sata_fsl"), |
| .can_queue = SATA_FSL_QUEUE_DEPTH, |
| .sg_tablesize = SATA_FSL_MAX_PRD_USABLE, |
| .dma_boundary = ATA_DMA_BOUNDARY, |
| }; |
| |
| static struct ata_port_operations sata_fsl_ops = { |
| .inherits = &sata_pmp_port_ops, |
| |
| .qc_defer = ata_std_qc_defer, |
| .qc_prep = sata_fsl_qc_prep, |
| .qc_issue = sata_fsl_qc_issue, |
| .qc_fill_rtf = sata_fsl_qc_fill_rtf, |
| |
| .scr_read = sata_fsl_scr_read, |
| .scr_write = sata_fsl_scr_write, |
| |
| .freeze = sata_fsl_freeze, |
| .thaw = sata_fsl_thaw, |
| .softreset = sata_fsl_softreset, |
| .hardreset = sata_fsl_hardreset, |
| .pmp_softreset = sata_fsl_softreset, |
| .error_handler = sata_fsl_error_handler, |
| .post_internal_cmd = sata_fsl_post_internal_cmd, |
| |
| .port_start = sata_fsl_port_start, |
| .port_stop = sata_fsl_port_stop, |
| |
| .pmp_attach = sata_fsl_pmp_attach, |
| .pmp_detach = sata_fsl_pmp_detach, |
| }; |
| |
| static const struct ata_port_info sata_fsl_port_info[] = { |
| { |
| .flags = SATA_FSL_HOST_FLAGS, |
| .pio_mask = ATA_PIO4, |
| .udma_mask = ATA_UDMA6, |
| .port_ops = &sata_fsl_ops, |
| }, |
| }; |
| |
| static int sata_fsl_probe(struct platform_device *ofdev) |
| { |
| int retval = -ENXIO; |
| void __iomem *hcr_base = NULL; |
| void __iomem *ssr_base = NULL; |
| void __iomem *csr_base = NULL; |
| struct sata_fsl_host_priv *host_priv = NULL; |
| int irq; |
| struct ata_host *host = NULL; |
| u32 temp; |
| |
| struct ata_port_info pi = sata_fsl_port_info[0]; |
| const struct ata_port_info *ppi[] = { &pi, NULL }; |
| |
| dev_info(&ofdev->dev, "Sata FSL Platform/CSB Driver init\n"); |
| |
| hcr_base = of_iomap(ofdev->dev.of_node, 0); |
| if (!hcr_base) |
| goto error_exit_with_cleanup; |
| |
| ssr_base = hcr_base + 0x100; |
| csr_base = hcr_base + 0x140; |
| |
| if (!of_device_is_compatible(ofdev->dev.of_node, "fsl,mpc8315-sata")) { |
| temp = ioread32(csr_base + TRANSCFG); |
| temp = temp & 0xffffffe0; |
| iowrite32(temp | TRANSCFG_RX_WATER_MARK, csr_base + TRANSCFG); |
| } |
| |
| DPRINTK("@reset i/o = 0x%x\n", ioread32(csr_base + TRANSCFG)); |
| DPRINTK("sizeof(cmd_desc) = %d\n", sizeof(struct command_desc)); |
| DPRINTK("sizeof(#define cmd_desc) = %d\n", SATA_FSL_CMD_DESC_SIZE); |
| |
| host_priv = kzalloc(sizeof(struct sata_fsl_host_priv), GFP_KERNEL); |
| if (!host_priv) |
| goto error_exit_with_cleanup; |
| |
| host_priv->hcr_base = hcr_base; |
| host_priv->ssr_base = ssr_base; |
| host_priv->csr_base = csr_base; |
| |
| irq = irq_of_parse_and_map(ofdev->dev.of_node, 0); |
| if (!irq) { |
| dev_err(&ofdev->dev, "invalid irq from platform\n"); |
| goto error_exit_with_cleanup; |
| } |
| host_priv->irq = irq; |
| |
| if (of_device_is_compatible(ofdev->dev.of_node, "fsl,pq-sata-v2")) |
| host_priv->data_snoop = DATA_SNOOP_ENABLE_V2; |
| else |
| host_priv->data_snoop = DATA_SNOOP_ENABLE_V1; |
| |
| /* allocate host structure */ |
| host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_FSL_MAX_PORTS); |
| if (!host) { |
| retval = -ENOMEM; |
| goto error_exit_with_cleanup; |
| } |
| |
| /* host->iomap is not used currently */ |
| host->private_data = host_priv; |
| |
| /* initialize host controller */ |
| sata_fsl_init_controller(host); |
| |
| /* |
| * Now, register with libATA core, this will also initiate the |
| * device discovery process, invoking our port_start() handler & |
| * error_handler() to execute a dummy Softreset EH session |
| */ |
| ata_host_activate(host, irq, sata_fsl_interrupt, SATA_FSL_IRQ_FLAG, |
| &sata_fsl_sht); |
| |
| platform_set_drvdata(ofdev, host); |
| |
| host_priv->intr_coalescing.show = fsl_sata_intr_coalescing_show; |
| host_priv->intr_coalescing.store = fsl_sata_intr_coalescing_store; |
| sysfs_attr_init(&host_priv->intr_coalescing.attr); |
| host_priv->intr_coalescing.attr.name = "intr_coalescing"; |
| host_priv->intr_coalescing.attr.mode = S_IRUGO | S_IWUSR; |
| retval = device_create_file(host->dev, &host_priv->intr_coalescing); |
| if (retval) |
| goto error_exit_with_cleanup; |
| |
| host_priv->rx_watermark.show = fsl_sata_rx_watermark_show; |
| host_priv->rx_watermark.store = fsl_sata_rx_watermark_store; |
| sysfs_attr_init(&host_priv->rx_watermark.attr); |
| host_priv->rx_watermark.attr.name = "rx_watermark"; |
| host_priv->rx_watermark.attr.mode = S_IRUGO | S_IWUSR; |
| retval = device_create_file(host->dev, &host_priv->rx_watermark); |
| if (retval) { |
| device_remove_file(&ofdev->dev, &host_priv->intr_coalescing); |
| goto error_exit_with_cleanup; |
| } |
| |
| return 0; |
| |
| error_exit_with_cleanup: |
| |
| if (host) |
| ata_host_detach(host); |
| |
| if (hcr_base) |
| iounmap(hcr_base); |
| kfree(host_priv); |
| |
| return retval; |
| } |
| |
| static int sata_fsl_remove(struct platform_device *ofdev) |
| { |
| struct ata_host *host = platform_get_drvdata(ofdev); |
| struct sata_fsl_host_priv *host_priv = host->private_data; |
| |
| device_remove_file(&ofdev->dev, &host_priv->intr_coalescing); |
| device_remove_file(&ofdev->dev, &host_priv->rx_watermark); |
| |
| ata_host_detach(host); |
| |
| irq_dispose_mapping(host_priv->irq); |
| iounmap(host_priv->hcr_base); |
| kfree(host_priv); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int sata_fsl_suspend(struct platform_device *op, pm_message_t state) |
| { |
| struct ata_host *host = platform_get_drvdata(op); |
| return ata_host_suspend(host, state); |
| } |
| |
| static int sata_fsl_resume(struct platform_device *op) |
| { |
| struct ata_host *host = platform_get_drvdata(op); |
| struct sata_fsl_host_priv *host_priv = host->private_data; |
| int ret; |
| void __iomem *hcr_base = host_priv->hcr_base; |
| struct ata_port *ap = host->ports[0]; |
| struct sata_fsl_port_priv *pp = ap->private_data; |
| |
| ret = sata_fsl_init_controller(host); |
| if (ret) { |
| dev_err(&op->dev, "Error initializing hardware\n"); |
| return ret; |
| } |
| |
| /* Recovery the CHBA register in host controller cmd register set */ |
| iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA); |
| |
| iowrite32((ioread32(hcr_base + HCONTROL) |
| | HCONTROL_ONLINE_PHY_RST |
| | HCONTROL_SNOOP_ENABLE |
| | HCONTROL_PMP_ATTACHED), |
| hcr_base + HCONTROL); |
| |
| ata_host_resume(host); |
| return 0; |
| } |
| #endif |
| |
| static const struct of_device_id fsl_sata_match[] = { |
| { |
| .compatible = "fsl,pq-sata", |
| }, |
| { |
| .compatible = "fsl,pq-sata-v2", |
| }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, fsl_sata_match); |
| |
| static struct platform_driver fsl_sata_driver = { |
| .driver = { |
| .name = "fsl-sata", |
| .of_match_table = fsl_sata_match, |
| }, |
| .probe = sata_fsl_probe, |
| .remove = sata_fsl_remove, |
| #ifdef CONFIG_PM_SLEEP |
| .suspend = sata_fsl_suspend, |
| .resume = sata_fsl_resume, |
| #endif |
| }; |
| |
| module_platform_driver(fsl_sata_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Ashish Kalra, Freescale Semiconductor"); |
| MODULE_DESCRIPTION("Freescale 3.0Gbps SATA controller low level driver"); |
| MODULE_VERSION("1.10"); |