Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / 9c065a7d5b679e7fabe3cace4faadb283f2b0c1f / . / drivers / gpu / drm / i915 / i915_irq.c
blob: 080981b56a4eee88095bc657e7cbb1ab9c705a66 [file] [log] [blame]
/* i915_irq.c -- IRQ support for the I915 -*- linux-c -*-
*/
/*
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/sysrq.h>
#include <linux/slab.h>
#include <linux/circ_buf.h>
#include <drm/drmP.h>
#include <drm/i915_drm.h>
#include "i915_drv.h"
#include "i915_trace.h"
#include "intel_drv.h"
static const u32 hpd_ibx[] = {
[HPD_CRT] = SDE_CRT_HOTPLUG,
[HPD_SDVO_B] = SDE_SDVOB_HOTPLUG,
[HPD_PORT_B] = SDE_PORTB_HOTPLUG,
[HPD_PORT_C] = SDE_PORTC_HOTPLUG,
[HPD_PORT_D] = SDE_PORTD_HOTPLUG
};
static const u32 hpd_cpt[] = {
[HPD_CRT] = SDE_CRT_HOTPLUG_CPT,
[HPD_SDVO_B] = SDE_SDVOB_HOTPLUG_CPT,
[HPD_PORT_B] = SDE_PORTB_HOTPLUG_CPT,
[HPD_PORT_C] = SDE_PORTC_HOTPLUG_CPT,
[HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT
};
static const u32 hpd_mask_i915[] = {
[HPD_CRT] = CRT_HOTPLUG_INT_EN,
[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_EN,
[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_EN,
[HPD_PORT_B] = PORTB_HOTPLUG_INT_EN,
[HPD_PORT_C] = PORTC_HOTPLUG_INT_EN,
[HPD_PORT_D] = PORTD_HOTPLUG_INT_EN
};
static const u32 hpd_status_g4x[] = {
[HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_G4X,
[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_G4X,
[HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
[HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
[HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
};
static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */
[HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_I915,
[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_I915,
[HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
[HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
[HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
};
/* IIR can theoretically queue up two events. Be paranoid. */
#define GEN8_IRQ_RESET_NDX(type, which) do { \
I915_WRITE(GEN8_##type##_IMR(which), 0xffffffff); \
POSTING_READ(GEN8_##type##_IMR(which)); \
I915_WRITE(GEN8_##type##_IER(which), 0); \
I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \
POSTING_READ(GEN8_##type##_IIR(which)); \
I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \
POSTING_READ(GEN8_##type##_IIR(which)); \
} while (0)
#define GEN5_IRQ_RESET(type) do { \
I915_WRITE(type##IMR, 0xffffffff); \
POSTING_READ(type##IMR); \
I915_WRITE(type##IER, 0); \
I915_WRITE(type##IIR, 0xffffffff); \
POSTING_READ(type##IIR); \
I915_WRITE(type##IIR, 0xffffffff); \
POSTING_READ(type##IIR); \
} while (0)
/*
* We should clear IMR at preinstall/uninstall, and just check at postinstall.
*/
#define GEN5_ASSERT_IIR_IS_ZERO(reg) do { \
u32 val = I915_READ(reg); \
if (val) { \
WARN(1, "Interrupt register 0x%x is not zero: 0x%08x\n", \
(reg), val); \
I915_WRITE((reg), 0xffffffff); \
POSTING_READ(reg); \
I915_WRITE((reg), 0xffffffff); \
POSTING_READ(reg); \
} \
} while (0)
#define GEN8_IRQ_INIT_NDX(type, which, imr_val, ier_val) do { \
GEN5_ASSERT_IIR_IS_ZERO(GEN8_##type##_IIR(which)); \
I915_WRITE(GEN8_##type##_IMR(which), (imr_val)); \
I915_WRITE(GEN8_##type##_IER(which), (ier_val)); \
POSTING_READ(GEN8_##type##_IER(which)); \
} while (0)
#define GEN5_IRQ_INIT(type, imr_val, ier_val) do { \
GEN5_ASSERT_IIR_IS_ZERO(type##IIR); \
I915_WRITE(type##IMR, (imr_val)); \
I915_WRITE(type##IER, (ier_val)); \
POSTING_READ(type##IER); \
} while (0)
/* For display hotplug interrupt */
static void
ironlake_enable_display_irq(struct drm_i915_private *dev_priv, u32 mask)
{
assert_spin_locked(&dev_priv->irq_lock);
if (WARN_ON(!intel_irqs_enabled(dev_priv)))
return;
if ((dev_priv->irq_mask & mask) != 0) {
dev_priv->irq_mask &= ~mask;
I915_WRITE(DEIMR, dev_priv->irq_mask);
POSTING_READ(DEIMR);
}
}
static void
ironlake_disable_display_irq(struct drm_i915_private *dev_priv, u32 mask)
{
assert_spin_locked(&dev_priv->irq_lock);
if (WARN_ON(!intel_irqs_enabled(dev_priv)))
return;
if ((dev_priv->irq_mask & mask) != mask) {
dev_priv->irq_mask |= mask;
I915_WRITE(DEIMR, dev_priv->irq_mask);
POSTING_READ(DEIMR);
}
}
/**
* ilk_update_gt_irq - update GTIMR
* @dev_priv: driver private
* @interrupt_mask: mask of interrupt bits to update
* @enabled_irq_mask: mask of interrupt bits to enable
*/
static void ilk_update_gt_irq(struct drm_i915_private *dev_priv,
uint32_t interrupt_mask,
uint32_t enabled_irq_mask)
{
assert_spin_locked(&dev_priv->irq_lock);
if (WARN_ON(!intel_irqs_enabled(dev_priv)))
return;
dev_priv->gt_irq_mask &= ~interrupt_mask;
dev_priv->gt_irq_mask |= (~enabled_irq_mask & interrupt_mask);
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
POSTING_READ(GTIMR);
}
void gen5_enable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask)
{
ilk_update_gt_irq(dev_priv, mask, mask);
}
void gen5_disable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask)
{
ilk_update_gt_irq(dev_priv, mask, 0);
}
/**
* snb_update_pm_irq - update GEN6_PMIMR
* @dev_priv: driver private
* @interrupt_mask: mask of interrupt bits to update
* @enabled_irq_mask: mask of interrupt bits to enable
*/
static void snb_update_pm_irq(struct drm_i915_private *dev_priv,
uint32_t interrupt_mask,
uint32_t enabled_irq_mask)
{
uint32_t new_val;
assert_spin_locked(&dev_priv->irq_lock);
if (WARN_ON(!intel_irqs_enabled(dev_priv)))
return;
new_val = dev_priv->pm_irq_mask;
new_val &= ~interrupt_mask;
new_val |= (~enabled_irq_mask & interrupt_mask);
if (new_val != dev_priv->pm_irq_mask) {
dev_priv->pm_irq_mask = new_val;
I915_WRITE(GEN6_PMIMR, dev_priv->pm_irq_mask);
POSTING_READ(GEN6_PMIMR);
}
}
void gen6_enable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask)
{
snb_update_pm_irq(dev_priv, mask, mask);
}
void gen6_disable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask)
{
snb_update_pm_irq(dev_priv, mask, 0);
}
static bool ivb_can_enable_err_int(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *crtc;
enum pipe pipe;
assert_spin_locked(&dev_priv->irq_lock);
for_each_pipe(dev_priv, pipe) {
crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
if (crtc->cpu_fifo_underrun_disabled)
return false;
}
return true;
}
/**
* bdw_update_pm_irq - update GT interrupt 2
* @dev_priv: driver private
* @interrupt_mask: mask of interrupt bits to update
* @enabled_irq_mask: mask of interrupt bits to enable
*
* Copied from the snb function, updated with relevant register offsets
*/
static void bdw_update_pm_irq(struct drm_i915_private *dev_priv,
uint32_t interrupt_mask,
uint32_t enabled_irq_mask)
{
uint32_t new_val;
assert_spin_locked(&dev_priv->irq_lock);
if (WARN_ON(!intel_irqs_enabled(dev_priv)))
return;
new_val = dev_priv->pm_irq_mask;
new_val &= ~interrupt_mask;
new_val |= (~enabled_irq_mask & interrupt_mask);
if (new_val != dev_priv->pm_irq_mask) {
dev_priv->pm_irq_mask = new_val;
I915_WRITE(GEN8_GT_IMR(2), dev_priv->pm_irq_mask);
POSTING_READ(GEN8_GT_IMR(2));
}
}
void gen8_enable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask)
{
bdw_update_pm_irq(dev_priv, mask, mask);
}
void gen8_disable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask)
{
bdw_update_pm_irq(dev_priv, mask, 0);
}
static bool cpt_can_enable_serr_int(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe;
struct intel_crtc *crtc;
assert_spin_locked(&dev_priv->irq_lock);
for_each_pipe(dev_priv, pipe) {
crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
if (crtc->pch_fifo_underrun_disabled)
return false;
}
return true;
}
void i9xx_check_fifo_underruns(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *crtc;
spin_lock_irq(&dev_priv->irq_lock);
for_each_intel_crtc(dev, crtc) {
u32 reg = PIPESTAT(crtc->pipe);
u32 pipestat;
if (crtc->cpu_fifo_underrun_disabled)
continue;
pipestat = I915_READ(reg) & 0xffff0000;
if ((pipestat & PIPE_FIFO_UNDERRUN_STATUS) == 0)
continue;
I915_WRITE(reg, pipestat | PIPE_FIFO_UNDERRUN_STATUS);
POSTING_READ(reg);
DRM_ERROR("pipe %c underrun\n", pipe_name(crtc->pipe));
}
spin_unlock_irq(&dev_priv->irq_lock);
}
static void i9xx_set_fifo_underrun_reporting(struct drm_device *dev,
enum pipe pipe,
bool enable, bool old)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 reg = PIPESTAT(pipe);
u32 pipestat = I915_READ(reg) & 0xffff0000;
assert_spin_locked(&dev_priv->irq_lock);
if (enable) {
I915_WRITE(reg, pipestat | PIPE_FIFO_UNDERRUN_STATUS);
POSTING_READ(reg);
} else {
if (old && pipestat & PIPE_FIFO_UNDERRUN_STATUS)
DRM_ERROR("pipe %c underrun\n", pipe_name(pipe));
}
}
static void ironlake_set_fifo_underrun_reporting(struct drm_device *dev,
enum pipe pipe, bool enable)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t bit = (pipe == PIPE_A) ? DE_PIPEA_FIFO_UNDERRUN :
DE_PIPEB_FIFO_UNDERRUN;
if (enable)
ironlake_enable_display_irq(dev_priv, bit);
else
ironlake_disable_display_irq(dev_priv, bit);
}
static void ivybridge_set_fifo_underrun_reporting(struct drm_device *dev,
enum pipe pipe,
bool enable, bool old)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (enable) {
I915_WRITE(GEN7_ERR_INT, ERR_INT_FIFO_UNDERRUN(pipe));
if (!ivb_can_enable_err_int(dev))
return;
ironlake_enable_display_irq(dev_priv, DE_ERR_INT_IVB);
} else {
ironlake_disable_display_irq(dev_priv, DE_ERR_INT_IVB);
if (old &&
I915_READ(GEN7_ERR_INT) & ERR_INT_FIFO_UNDERRUN(pipe)) {
DRM_ERROR("uncleared fifo underrun on pipe %c\n",
pipe_name(pipe));
}
}
}
static void broadwell_set_fifo_underrun_reporting(struct drm_device *dev,
enum pipe pipe, bool enable)
{
struct drm_i915_private *dev_priv = dev->dev_private;
assert_spin_locked(&dev_priv->irq_lock);
if (enable)
dev_priv->de_irq_mask[pipe] &= ~GEN8_PIPE_FIFO_UNDERRUN;
else
dev_priv->de_irq_mask[pipe] |= GEN8_PIPE_FIFO_UNDERRUN;
I915_WRITE(GEN8_DE_PIPE_IMR(pipe), dev_priv->de_irq_mask[pipe]);
POSTING_READ(GEN8_DE_PIPE_IMR(pipe));
}
/**
* ibx_display_interrupt_update - update SDEIMR
* @dev_priv: driver private
* @interrupt_mask: mask of interrupt bits to update
* @enabled_irq_mask: mask of interrupt bits to enable
*/
static void ibx_display_interrupt_update(struct drm_i915_private *dev_priv,
uint32_t interrupt_mask,
uint32_t enabled_irq_mask)
{
uint32_t sdeimr = I915_READ(SDEIMR);
sdeimr &= ~interrupt_mask;
sdeimr |= (~enabled_irq_mask & interrupt_mask);
assert_spin_locked(&dev_priv->irq_lock);
if (WARN_ON(!intel_irqs_enabled(dev_priv)))
return;
I915_WRITE(SDEIMR, sdeimr);
POSTING_READ(SDEIMR);
}
#define ibx_enable_display_interrupt(dev_priv, bits) \
ibx_display_interrupt_update((dev_priv), (bits), (bits))
#define ibx_disable_display_interrupt(dev_priv, bits) \
ibx_display_interrupt_update((dev_priv), (bits), 0)
static void ibx_set_fifo_underrun_reporting(struct drm_device *dev,
enum transcoder pch_transcoder,
bool enable)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t bit = (pch_transcoder == TRANSCODER_A) ?
SDE_TRANSA_FIFO_UNDER : SDE_TRANSB_FIFO_UNDER;
if (enable)
ibx_enable_display_interrupt(dev_priv, bit);
else
ibx_disable_display_interrupt(dev_priv, bit);
}
static void cpt_set_fifo_underrun_reporting(struct drm_device *dev,
enum transcoder pch_transcoder,
bool enable, bool old)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (enable) {
I915_WRITE(SERR_INT,
SERR_INT_TRANS_FIFO_UNDERRUN(pch_transcoder));
if (!cpt_can_enable_serr_int(dev))
return;
ibx_enable_display_interrupt(dev_priv, SDE_ERROR_CPT);
} else {
ibx_disable_display_interrupt(dev_priv, SDE_ERROR_CPT);
if (old && I915_READ(SERR_INT) &
SERR_INT_TRANS_FIFO_UNDERRUN(pch_transcoder)) {
DRM_ERROR("uncleared pch fifo underrun on pch transcoder %c\n",
transcoder_name(pch_transcoder));
}
}
}
/**
* intel_set_cpu_fifo_underrun_reporting - enable/disable FIFO underrun messages
* @dev: drm device
* @pipe: pipe
* @enable: true if we want to report FIFO underrun errors, false otherwise
*
* This function makes us disable or enable CPU fifo underruns for a specific
* pipe. Notice that on some Gens (e.g. IVB, HSW), disabling FIFO underrun
* reporting for one pipe may also disable all the other CPU error interruts for
* the other pipes, due to the fact that there's just one interrupt mask/enable
* bit for all the pipes.
*
* Returns the previous state of underrun reporting.
*/
static bool __intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
enum pipe pipe, bool enable)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
bool old;
assert_spin_locked(&dev_priv->irq_lock);
old = !intel_crtc->cpu_fifo_underrun_disabled;
intel_crtc->cpu_fifo_underrun_disabled = !enable;
if (HAS_GMCH_DISPLAY(dev))
i9xx_set_fifo_underrun_reporting(dev, pipe, enable, old);
else if (IS_GEN5(dev) || IS_GEN6(dev))
ironlake_set_fifo_underrun_reporting(dev, pipe, enable);
else if (IS_GEN7(dev))
ivybridge_set_fifo_underrun_reporting(dev, pipe, enable, old);
else if (IS_GEN8(dev) || IS_GEN9(dev))
broadwell_set_fifo_underrun_reporting(dev, pipe, enable);
return old;
}
bool intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
enum pipe pipe, bool enable)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long flags;
bool ret;
spin_lock_irqsave(&dev_priv->irq_lock, flags);
ret = __intel_set_cpu_fifo_underrun_reporting(dev, pipe, enable);
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
return ret;
}
static bool __cpu_fifo_underrun_reporting_enabled(struct drm_device *dev,
enum pipe pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
return !intel_crtc->cpu_fifo_underrun_disabled;
}
/**
* intel_set_pch_fifo_underrun_reporting - enable/disable FIFO underrun messages
* @dev: drm device
* @pch_transcoder: the PCH transcoder (same as pipe on IVB and older)
* @enable: true if we want to report FIFO underrun errors, false otherwise
*
* This function makes us disable or enable PCH fifo underruns for a specific
* PCH transcoder. Notice that on some PCHs (e.g. CPT/PPT), disabling FIFO
* underrun reporting for one transcoder may also disable all the other PCH
* error interruts for the other transcoders, due to the fact that there's just
* one interrupt mask/enable bit for all the transcoders.
*
* Returns the previous state of underrun reporting.
*/
bool intel_set_pch_fifo_underrun_reporting(struct drm_device *dev,
enum transcoder pch_transcoder,
bool enable)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pch_transcoder];
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
unsigned long flags;
bool old;
/*
* NOTE: Pre-LPT has a fixed cpu pipe -> pch transcoder mapping, but LPT
* has only one pch transcoder A that all pipes can use. To avoid racy
* pch transcoder -> pipe lookups from interrupt code simply store the
* underrun statistics in crtc A. Since we never expose this anywhere
* nor use it outside of the fifo underrun code here using the "wrong"
* crtc on LPT won't cause issues.
*/
spin_lock_irqsave(&dev_priv->irq_lock, flags);
old = !intel_crtc->pch_fifo_underrun_disabled;
intel_crtc->pch_fifo_underrun_disabled = !enable;
if (HAS_PCH_IBX(dev))
ibx_set_fifo_underrun_reporting(dev, pch_transcoder, enable);
else
cpt_set_fifo_underrun_reporting(dev, pch_transcoder, enable, old);
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
return old;
}
static void
__i915_enable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe,
u32 enable_mask, u32 status_mask)
{
u32 reg = PIPESTAT(pipe);
u32 pipestat = I915_READ(reg) & PIPESTAT_INT_ENABLE_MASK;
assert_spin_locked(&dev_priv->irq_lock);
WARN_ON(!intel_irqs_enabled(dev_priv));
if (WARN_ONCE(enable_mask & ~PIPESTAT_INT_ENABLE_MASK ||
status_mask & ~PIPESTAT_INT_STATUS_MASK,
"pipe %c: enable_mask=0x%x, status_mask=0x%x\n",
pipe_name(pipe), enable_mask, status_mask))
return;
if ((pipestat & enable_mask) == enable_mask)
return;
dev_priv->pipestat_irq_mask[pipe] |= status_mask;
/* Enable the interrupt, clear any pending status */
pipestat |= enable_mask | status_mask;
I915_WRITE(reg, pipestat);
POSTING_READ(reg);
}
static void
__i915_disable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe,
u32 enable_mask, u32 status_mask)
{
u32 reg = PIPESTAT(pipe);
u32 pipestat = I915_READ(reg) & PIPESTAT_INT_ENABLE_MASK;
assert_spin_locked(&dev_priv->irq_lock);
WARN_ON(!intel_irqs_enabled(dev_priv));
if (WARN_ONCE(enable_mask & ~PIPESTAT_INT_ENABLE_MASK ||
status_mask & ~PIPESTAT_INT_STATUS_MASK,
"pipe %c: enable_mask=0x%x, status_mask=0x%x\n",
pipe_name(pipe), enable_mask, status_mask))
return;
if ((pipestat & enable_mask) == 0)
return;
dev_priv->pipestat_irq_mask[pipe] &= ~status_mask;
pipestat &= ~enable_mask;
I915_WRITE(reg, pipestat);
POSTING_READ(reg);
}
static u32 vlv_get_pipestat_enable_mask(struct drm_device *dev, u32 status_mask)
{
u32 enable_mask = status_mask << 16;
/*
* On pipe A we don't support the PSR interrupt yet,
* on pipe B and C the same bit MBZ.
*/
if (WARN_ON_ONCE(status_mask & PIPE_A_PSR_STATUS_VLV))
return 0;
/*
* On pipe B and C we don't support the PSR interrupt yet, on pipe
* A the same bit is for perf counters which we don't use either.
*/
if (WARN_ON_ONCE(status_mask & PIPE_B_PSR_STATUS_VLV))
return 0;
enable_mask &= ~(PIPE_FIFO_UNDERRUN_STATUS |
SPRITE0_FLIP_DONE_INT_EN_VLV |
SPRITE1_FLIP_DONE_INT_EN_VLV);
if (status_mask & SPRITE0_FLIP_DONE_INT_STATUS_VLV)
enable_mask |= SPRITE0_FLIP_DONE_INT_EN_VLV;
if (status_mask & SPRITE1_FLIP_DONE_INT_STATUS_VLV)
enable_mask |= SPRITE1_FLIP_DONE_INT_EN_VLV;
return enable_mask;
}
void
i915_enable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe,
u32 status_mask)
{
u32 enable_mask;
if (IS_VALLEYVIEW(dev_priv->dev))
enable_mask = vlv_get_pipestat_enable_mask(dev_priv->dev,
status_mask);
else
enable_mask = status_mask << 16;
__i915_enable_pipestat(dev_priv, pipe, enable_mask, status_mask);
}
void
i915_disable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe,
u32 status_mask)
{
u32 enable_mask;
if (IS_VALLEYVIEW(dev_priv->dev))
enable_mask = vlv_get_pipestat_enable_mask(dev_priv->dev,
status_mask);
else
enable_mask = status_mask << 16;
__i915_disable_pipestat(dev_priv, pipe, enable_mask, status_mask);
}
/**
* i915_enable_asle_pipestat - enable ASLE pipestat for OpRegion
*/
static void i915_enable_asle_pipestat(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (!dev_priv->opregion.asle || !IS_MOBILE(dev))
return;
spin_lock_irq(&dev_priv->irq_lock);
i915_enable_pipestat(dev_priv, PIPE_B, PIPE_LEGACY_BLC_EVENT_STATUS);
if (INTEL_INFO(dev)->gen >= 4)
i915_enable_pipestat(dev_priv, PIPE_A,
PIPE_LEGACY_BLC_EVENT_STATUS);
spin_unlock_irq(&dev_priv->irq_lock);
}
/**
* i915_pipe_enabled - check if a pipe is enabled
* @dev: DRM device
* @pipe: pipe to check
*
* Reading certain registers when the pipe is disabled can hang the chip.
* Use this routine to make sure the PLL is running and the pipe is active
* before reading such registers if unsure.
*/
static int
i915_pipe_enabled(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
/* Locking is horribly broken here, but whatever. */
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
return intel_crtc->active;
} else {
return I915_READ(PIPECONF(pipe)) & PIPECONF_ENABLE;
}
}
/*
* This timing diagram depicts the video signal in and
* around the vertical blanking period.
*
* Assumptions about the fictitious mode used in this example:
* vblank_start >= 3
* vsync_start = vblank_start + 1
* vsync_end = vblank_start + 2
* vtotal = vblank_start + 3
*
* start of vblank:
* latch double buffered registers
* increment frame counter (ctg+)
* generate start of vblank interrupt (gen4+)
* |
* | frame start:
* | generate frame start interrupt (aka. vblank interrupt) (gmch)
* | may be shifted forward 1-3 extra lines via PIPECONF
* | |
* | | start of vsync:
* | | generate vsync interrupt
* | | |
* ___xxxx___ ___xxxx___ ___xxxx___ ___xxxx___ ___xxxx___ ___xxxx
* . \hs/ . \hs/ \hs/ \hs/ . \hs/
* ----va---> <-----------------vb--------------------> <--------va-------------
* | | <----vs-----> |
* -vbs-----> <---vbs+1---> <---vbs+2---> <-----0-----> <-----1-----> <-----2--- (scanline counter gen2)
* -vbs-2---> <---vbs-1---> <---vbs-----> <---vbs+1---> <---vbs+2---> <-----0--- (scanline counter gen3+)
* -vbs-2---> <---vbs-2---> <---vbs-1---> <---vbs-----> <---vbs+1---> <---vbs+2- (scanline counter hsw+ hdmi)
* | | |
* last visible pixel first visible pixel
* | increment frame counter (gen3/4)
* pixel counter = vblank_start * htotal pixel counter = 0 (gen3/4)
*
* x = horizontal active
* _ = horizontal blanking
* hs = horizontal sync
* va = vertical active
* vb = vertical blanking
* vs = vertical sync
* vbs = vblank_start (number)
*
* Summary:
* - most events happen at the start of horizontal sync
* - frame start happens at the start of horizontal blank, 1-4 lines
* (depending on PIPECONF settings) after the start of vblank
* - gen3/4 pixel and frame counter are synchronized with the start
* of horizontal active on the first line of vertical active
*/
static u32 i8xx_get_vblank_counter(struct drm_device *dev, int pipe)
{
/* Gen2 doesn't have a hardware frame counter */
return 0;
}
/* Called from drm generic code, passed a 'crtc', which
* we use as a pipe index
*/
static u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long high_frame;
unsigned long low_frame;
u32 high1, high2, low, pixel, vbl_start, hsync_start, htotal;
if (!i915_pipe_enabled(dev, pipe)) {
DRM_DEBUG_DRIVER("trying to get vblank count for disabled "
"pipe %c\n", pipe_name(pipe));
return 0;
}
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
struct intel_crtc *intel_crtc =
to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
const struct drm_display_mode *mode =
&intel_crtc->config.adjusted_mode;
htotal = mode->crtc_htotal;
hsync_start = mode->crtc_hsync_start;
vbl_start = mode->crtc_vblank_start;
if (mode->flags & DRM_MODE_FLAG_INTERLACE)
vbl_start = DIV_ROUND_UP(vbl_start, 2);
} else {
enum transcoder cpu_transcoder = (enum transcoder) pipe;
htotal = ((I915_READ(HTOTAL(cpu_transcoder)) >> 16) & 0x1fff) + 1;
hsync_start = (I915_READ(HSYNC(cpu_transcoder)) & 0x1fff) + 1;
vbl_start = (I915_READ(VBLANK(cpu_transcoder)) & 0x1fff) + 1;
if ((I915_READ(PIPECONF(cpu_transcoder)) &
PIPECONF_INTERLACE_MASK) != PIPECONF_PROGRESSIVE)
vbl_start = DIV_ROUND_UP(vbl_start, 2);
}
/* Convert to pixel count */
vbl_start *= htotal;
/* Start of vblank event occurs at start of hsync */
vbl_start -= htotal - hsync_start;
high_frame = PIPEFRAME(pipe);
low_frame = PIPEFRAMEPIXEL(pipe);
/*
* High & low register fields aren't synchronized, so make sure
* we get a low value that's stable across two reads of the high
* register.
*/
do {
high1 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK;
low = I915_READ(low_frame);
high2 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK;
} while (high1 != high2);
high1 >>= PIPE_FRAME_HIGH_SHIFT;
pixel = low & PIPE_PIXEL_MASK;
low >>= PIPE_FRAME_LOW_SHIFT;
/*
* The frame counter increments at beginning of active.
* Cook up a vblank counter by also checking the pixel
* counter against vblank start.
*/
return (((high1 << 8) | low) + (pixel >= vbl_start)) & 0xffffff;
}
static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int reg = PIPE_FRMCOUNT_GM45(pipe);
if (!i915_pipe_enabled(dev, pipe)) {
DRM_DEBUG_DRIVER("trying to get vblank count for disabled "
"pipe %c\n", pipe_name(pipe));
return 0;
}
return I915_READ(reg);
}
/* raw reads, only for fast reads of display block, no need for forcewake etc. */
#define __raw_i915_read32(dev_priv__, reg__) readl((dev_priv__)->regs + (reg__))
static int __intel_get_crtc_scanline(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
const struct drm_display_mode *mode = &crtc->config.adjusted_mode;
enum pipe pipe = crtc->pipe;
int position, vtotal;
vtotal = mode->crtc_vtotal;
if (mode->flags & DRM_MODE_FLAG_INTERLACE)
vtotal /= 2;
if (IS_GEN2(dev))
position = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN2;
else
position = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN3;
/*
* See update_scanline_offset() for the details on the
* scanline_offset adjustment.
*/
return (position + crtc->scanline_offset) % vtotal;
}
static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
unsigned int flags, int *vpos, int *hpos,
ktime_t *stime, ktime_t *etime)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
const struct drm_display_mode *mode = &intel_crtc->config.adjusted_mode;
int position;
int vbl_start, vbl_end, hsync_start, htotal, vtotal;
bool in_vbl = true;
int ret = 0;
unsigned long irqflags;
if (!intel_crtc->active) {
DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled "
"pipe %c\n", pipe_name(pipe));
return 0;
}
htotal = mode->crtc_htotal;
hsync_start = mode->crtc_hsync_start;
vtotal = mode->crtc_vtotal;
vbl_start = mode->crtc_vblank_start;
vbl_end = mode->crtc_vblank_end;
if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
vbl_start = DIV_ROUND_UP(vbl_start, 2);
vbl_end /= 2;
vtotal /= 2;
}
ret |= DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE;
/*
* Lock uncore.lock, as we will do multiple timing critical raw
* register reads, potentially with preemption disabled, so the
* following code must not block on uncore.lock.
*/
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
/* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */
/* Get optional system timestamp before query. */
if (stime)
*stime = ktime_get();
if (IS_GEN2(dev) || IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
/* No obvious pixelcount register. Only query vertical
* scanout position from Display scan line register.
*/
position = __intel_get_crtc_scanline(intel_crtc);
} else {
/* Have access to pixelcount since start of frame.
* We can split this into vertical and horizontal
* scanout position.
*/
position = (__raw_i915_read32(dev_priv, PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT;
/* convert to pixel counts */
vbl_start *= htotal;
vbl_end *= htotal;
vtotal *= htotal;
/*
* In interlaced modes, the pixel counter counts all pixels,
* so one field will have htotal more pixels. In order to avoid
* the reported position from jumping backwards when the pixel
* counter is beyond the length of the shorter field, just
* clamp the position the length of the shorter field. This
* matches how the scanline counter based position works since
* the scanline counter doesn't count the two half lines.
*/
if (position >= vtotal)
position = vtotal - 1;
/*
* Start of vblank interrupt is triggered at start of hsync,
* just prior to the first active line of vblank. However we
* consider lines to start at the leading edge of horizontal
* active. So, should we get here before we've crossed into
* the horizontal active of the first line in vblank, we would
* not set the DRM_SCANOUTPOS_INVBL flag. In order to fix that,
* always add htotal-hsync_start to the current pixel position.
*/
position = (position + htotal - hsync_start) % vtotal;
}
/* Get optional system timestamp after query. */
if (etime)
*etime = ktime_get();
/* preempt_enable_rt() should go right here in PREEMPT_RT patchset. */
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
in_vbl = position >= vbl_start && position < vbl_end;
/*
* While in vblank, position will be negative
* counting up towards 0 at vbl_end. And outside
* vblank, position will be positive counting
* up since vbl_end.
*/
if (position >= vbl_start)
position -= vbl_end;
else
position += vtotal - vbl_end;
if (IS_GEN2(dev) || IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
*vpos = position;
*hpos = 0;
} else {
*vpos = position / htotal;
*hpos = position - (*vpos * htotal);
}
/* In vblank? */
if (in_vbl)
ret |= DRM_SCANOUTPOS_IN_VBLANK;
return ret;
}
int intel_get_crtc_scanline(struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
unsigned long irqflags;
int position;
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
position = __intel_get_crtc_scanline(crtc);
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
return position;
}
static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe,
int *max_error,
struct timeval *vblank_time,
unsigned flags)
{
struct drm_crtc *crtc;
if (pipe < 0 || pipe >= INTEL_INFO(dev)->num_pipes) {
DRM_ERROR("Invalid crtc %d\n", pipe);
return -EINVAL;
}
/* Get drm_crtc to timestamp: */
crtc = intel_get_crtc_for_pipe(dev, pipe);
if (crtc == NULL) {
DRM_ERROR("Invalid crtc %d\n", pipe);
return -EINVAL;
}
if (!crtc->enabled) {
DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
return -EBUSY;
}
/* Helper routine in DRM core does all the work: */
return drm_calc_vbltimestamp_from_scanoutpos(dev, pipe, max_error,
vblank_time, flags,
crtc,
&to_intel_crtc(crtc)->config.adjusted_mode);
}
static bool intel_hpd_irq_event(struct drm_device *dev,
struct drm_connector *connector)
{
enum drm_connector_status old_status;
WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
old_status = connector->status;
connector->status = connector->funcs->detect(connector, false);
if (old_status == connector->status)
return false;
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
connector->base.id,
connector->name,
drm_get_connector_status_name(old_status),
drm_get_connector_status_name(connector->status));
return true;
}
static void i915_digport_work_func(struct work_struct *work)
{
struct drm_i915_private *dev_priv =
container_of(work, struct drm_i915_private, dig_port_work);
u32 long_port_mask, short_port_mask;
struct intel_digital_port *intel_dig_port;
int i, ret;
u32 old_bits = 0;
spin_lock_irq(&dev_priv->irq_lock);
long_port_mask = dev_priv->long_hpd_port_mask;
dev_priv->long_hpd_port_mask = 0;
short_port_mask = dev_priv->short_hpd_port_mask;
dev_priv->short_hpd_port_mask = 0;
spin_unlock_irq(&dev_priv->irq_lock);
for (i = 0; i < I915_MAX_PORTS; i++) {
bool valid = false;
bool long_hpd = false;
intel_dig_port = dev_priv->hpd_irq_port[i];
if (!intel_dig_port || !intel_dig_port->hpd_pulse)
continue;
if (long_port_mask & (1 << i)) {
valid = true;
long_hpd = true;
} else if (short_port_mask & (1 << i))
valid = true;
if (valid) {
ret = intel_dig_port->hpd_pulse(intel_dig_port, long_hpd);
if (ret == true) {
/* if we get true fallback to old school hpd */
old_bits |= (1 << intel_dig_port->base.hpd_pin);
}
}
}
if (old_bits) {
spin_lock_irq(&dev_priv->irq_lock);
dev_priv->hpd_event_bits |= old_bits;
spin_unlock_irq(&dev_priv->irq_lock);
schedule_work(&dev_priv->hotplug_work);
}
}
/*
* Handle hotplug events outside the interrupt handler proper.
*/
#define I915_REENABLE_HOTPLUG_DELAY (2*60*1000)
static void i915_hotplug_work_func(struct work_struct *work)
{
struct drm_i915_private *dev_priv =
container_of(work, struct drm_i915_private, hotplug_work);
struct drm_device *dev = dev_priv->dev;
struct drm_mode_config *mode_config = &dev->mode_config;
struct intel_connector *intel_connector;
struct intel_encoder *intel_encoder;
struct drm_connector *connector;
bool hpd_disabled = false;
bool changed = false;
u32 hpd_event_bits;
mutex_lock(&mode_config->mutex);
DRM_DEBUG_KMS("running encoder hotplug functions\n");
spin_lock_irq(&dev_priv->irq_lock);
hpd_event_bits = dev_priv->hpd_event_bits;
dev_priv->hpd_event_bits = 0;
list_for_each_entry(connector, &mode_config->connector_list, head) {
intel_connector = to_intel_connector(connector);
if (!intel_connector->encoder)
continue;
intel_encoder = intel_connector->encoder;
if (intel_encoder->hpd_pin > HPD_NONE &&
dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_MARK_DISABLED &&
connector->polled == DRM_CONNECTOR_POLL_HPD) {
DRM_INFO("HPD interrupt storm detected on connector %s: "
"switching from hotplug detection to polling\n",
connector->name);
dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark = HPD_DISABLED;
connector->polled = DRM_CONNECTOR_POLL_CONNECT
| DRM_CONNECTOR_POLL_DISCONNECT;
hpd_disabled = true;
}
if (hpd_event_bits & (1 << intel_encoder->hpd_pin)) {
DRM_DEBUG_KMS("Connector %s (pin %i) received hotplug event.\n",
connector->name, intel_encoder->hpd_pin);
}
}
/* if there were no outputs to poll, poll was disabled,
* therefore make sure it's enabled when disabling HPD on
* some connectors */
if (hpd_disabled) {
drm_kms_helper_poll_enable(dev);
mod_delayed_work(system_wq, &dev_priv->hotplug_reenable_work,
msecs_to_jiffies(I915_REENABLE_HOTPLUG_DELAY));
}
spin_unlock_irq(&dev_priv->irq_lock);
list_for_each_entry(connector, &mode_config->connector_list, head) {
intel_connector = to_intel_connector(connector);
if (!intel_connector->encoder)
continue;
intel_encoder = intel_connector->encoder;
if (hpd_event_bits & (1 << intel_encoder->hpd_pin)) {
if (intel_encoder->hot_plug)
intel_encoder->hot_plug(intel_encoder);
if (intel_hpd_irq_event(dev, connector))
changed = true;
}
}
mutex_unlock(&mode_config->mutex);
if (changed)
drm_kms_helper_hotplug_event(dev);
}
static void ironlake_rps_change_irq_handler(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 busy_up, busy_down, max_avg, min_avg;
u8 new_delay;
spin_lock(&mchdev_lock);
I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS));
new_delay = dev_priv->ips.cur_delay;
I915_WRITE16(MEMINTRSTS, MEMINT_EVAL_CHG);
busy_up = I915_READ(RCPREVBSYTUPAVG);
busy_down = I915_READ(RCPREVBSYTDNAVG);
max_avg = I915_READ(RCBMAXAVG);
min_avg = I915_READ(RCBMINAVG);
/* Handle RCS change request from hw */
if (busy_up > max_avg) {
if (dev_priv->ips.cur_delay != dev_priv->ips.max_delay)
new_delay = dev_priv->ips.cur_delay - 1;
if (new_delay < dev_priv->ips.max_delay)
new_delay = dev_priv->ips.max_delay;
} else if (busy_down < min_avg) {
if (dev_priv->ips.cur_delay != dev_priv->ips.min_delay)
new_delay = dev_priv->ips.cur_delay + 1;
if (new_delay > dev_priv->ips.min_delay)
new_delay = dev_priv->ips.min_delay;
}
if (ironlake_set_drps(dev, new_delay))
dev_priv->ips.cur_delay = new_delay;
spin_unlock(&mchdev_lock);
return;
}
static void notify_ring(struct drm_device *dev,
struct intel_engine_cs *ring)
{
if (!intel_ring_initialized(ring))
return;
trace_i915_gem_request_complete(ring);
if (drm_core_check_feature(dev, DRIVER_MODESET))
intel_notify_mmio_flip(ring);
wake_up_all(&ring->irq_queue);
i915_queue_hangcheck(dev);
}
static u32 vlv_c0_residency(struct drm_i915_private *dev_priv,
struct intel_rps_ei *rps_ei)
{
u32 cz_ts, cz_freq_khz;
u32 render_count, media_count;
u32 elapsed_render, elapsed_media, elapsed_time;
u32 residency = 0;
cz_ts = vlv_punit_read(dev_priv, PUNIT_REG_CZ_TIMESTAMP);
cz_freq_khz = DIV_ROUND_CLOSEST(dev_priv->mem_freq * 1000, 4);
render_count = I915_READ(VLV_RENDER_C0_COUNT_REG);
media_count = I915_READ(VLV_MEDIA_C0_COUNT_REG);
if (rps_ei->cz_clock == 0) {
rps_ei->cz_clock = cz_ts;
rps_ei->render_c0 = render_count;
rps_ei->media_c0 = media_count;
return dev_priv->rps.cur_freq;
}
elapsed_time = cz_ts - rps_ei->cz_clock;
rps_ei->cz_clock = cz_ts;
elapsed_render = render_count - rps_ei->render_c0;
rps_ei->render_c0 = render_count;
elapsed_media = media_count - rps_ei->media_c0;
rps_ei->media_c0 = media_count;
/* Convert all the counters into common unit of milli sec */
elapsed_time /= VLV_CZ_CLOCK_TO_MILLI_SEC;
elapsed_render /= cz_freq_khz;
elapsed_media /= cz_freq_khz;
/*
* Calculate overall C0 residency percentage
* only if elapsed time is non zero
*/
if (elapsed_time) {
residency =
((max(elapsed_render, elapsed_media) * 100)
/ elapsed_time);
}
return residency;
}
/**
* vlv_calc_delay_from_C0_counters - Increase/Decrease freq based on GPU
* busy-ness calculated from C0 counters of render & media power wells
* @dev_priv: DRM device private
*
*/
static int vlv_calc_delay_from_C0_counters(struct drm_i915_private *dev_priv)
{
u32 residency_C0_up = 0, residency_C0_down = 0;
int new_delay, adj;
dev_priv->rps.ei_interrupt_count++;
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
if (dev_priv->rps.up_ei.cz_clock == 0) {
vlv_c0_residency(dev_priv, &dev_priv->rps.up_ei);
vlv_c0_residency(dev_priv, &dev_priv->rps.down_ei);
return dev_priv->rps.cur_freq;
}
/*
* To down throttle, C0 residency should be less than down threshold
* for continous EI intervals. So calculate down EI counters
* once in VLV_INT_COUNT_FOR_DOWN_EI
*/
if (dev_priv->rps.ei_interrupt_count == VLV_INT_COUNT_FOR_DOWN_EI) {
dev_priv->rps.ei_interrupt_count = 0;
residency_C0_down = vlv_c0_residency(dev_priv,
&dev_priv->rps.down_ei);
} else {
residency_C0_up = vlv_c0_residency(dev_priv,
&dev_priv->rps.up_ei);
}
new_delay = dev_priv->rps.cur_freq;
adj = dev_priv->rps.last_adj;
/* C0 residency is greater than UP threshold. Increase Frequency */
if (residency_C0_up >= VLV_RP_UP_EI_THRESHOLD) {
if (adj > 0)
adj *= 2;
else
adj = 1;
if (dev_priv->rps.cur_freq < dev_priv->rps.max_freq_softlimit)
new_delay = dev_priv->rps.cur_freq + adj;
/*
* For better performance, jump directly
* to RPe if we're below it.
*/
if (new_delay < dev_priv->rps.efficient_freq)
new_delay = dev_priv->rps.efficient_freq;
} else if (!dev_priv->rps.ei_interrupt_count &&
(residency_C0_down < VLV_RP_DOWN_EI_THRESHOLD)) {
if (adj < 0)
adj *= 2;
else
adj = -1;
/*
* This means, C0 residency is less than down threshold over
* a period of VLV_INT_COUNT_FOR_DOWN_EI. So, reduce the freq
*/
if (dev_priv->rps.cur_freq > dev_priv->rps.min_freq_softlimit)
new_delay = dev_priv->rps.cur_freq + adj;
}
return new_delay;
}
static void gen6_pm_rps_work(struct work_struct *work)
{
struct drm_i915_private *dev_priv =
container_of(work, struct drm_i915_private, rps.work);
u32 pm_iir;
int new_delay, adj;
spin_lock_irq(&dev_priv->irq_lock);
pm_iir = dev_priv->rps.pm_iir;
dev_priv->rps.pm_iir = 0;
if (INTEL_INFO(dev_priv->dev)->gen >= 8)
gen8_enable_pm_irq(dev_priv, dev_priv->pm_rps_events);
else {
/* Make sure not to corrupt PMIMR state used by ringbuffer */
gen6_enable_pm_irq(dev_priv, dev_priv->pm_rps_events);
}
spin_unlock_irq(&dev_priv->irq_lock);
/* Make sure we didn't queue anything we're not going to process. */
WARN_ON(pm_iir & ~dev_priv->pm_rps_events);
if ((pm_iir & dev_priv->pm_rps_events) == 0)
return;
mutex_lock(&dev_priv->rps.hw_lock);
adj = dev_priv->rps.last_adj;
if (pm_iir & GEN6_PM_RP_UP_THRESHOLD) {
if (adj > 0)
adj *= 2;
else {
/* CHV needs even encode values */
adj = IS_CHERRYVIEW(dev_priv->dev) ? 2 : 1;
}
new_delay = dev_priv->rps.cur_freq + adj;
/*
* For better performance, jump directly
* to RPe if we're below it.
*/
if (new_delay < dev_priv->rps.efficient_freq)
new_delay = dev_priv->rps.efficient_freq;
} else if (pm_iir & GEN6_PM_RP_DOWN_TIMEOUT) {
if (dev_priv->rps.cur_freq > dev_priv->rps.efficient_freq)
new_delay = dev_priv->rps.efficient_freq;
else
new_delay = dev_priv->rps.min_freq_softlimit;
adj = 0;
} else if (pm_iir & GEN6_PM_RP_UP_EI_EXPIRED) {
new_delay = vlv_calc_delay_from_C0_counters(dev_priv);
} else if (pm_iir & GEN6_PM_RP_DOWN_THRESHOLD) {
if (adj < 0)
adj *= 2;
else {
/* CHV needs even encode values */
adj = IS_CHERRYVIEW(dev_priv->dev) ? -2 : -1;
}
new_delay = dev_priv->rps.cur_freq + adj;
} else { /* unknown event */
new_delay = dev_priv->rps.cur_freq;
}
/* sysfs frequency interfaces may have snuck in while servicing the
* interrupt
*/
new_delay = clamp_t(int, new_delay,
dev_priv->rps.min_freq_softlimit,
dev_priv->rps.max_freq_softlimit);
dev_priv->rps.last_adj = new_delay - dev_priv->rps.cur_freq;
if (IS_VALLEYVIEW(dev_priv->dev))
valleyview_set_rps(dev_priv->dev, new_delay);
else
gen6_set_rps(dev_priv->dev, new_delay);
mutex_unlock(&dev_priv->rps.hw_lock);
}
/**
* ivybridge_parity_work - Workqueue called when a parity error interrupt
* occurred.
* @work: workqueue struct
*
* Doesn't actually do anything except notify userspace. As a consequence of
* this event, userspace should try to remap the bad rows since statistically
* it is likely the same row is more likely to go bad again.
*/
static void ivybridge_parity_work(struct work_struct *work)
{
struct drm_i915_private *dev_priv =
container_of(work, struct drm_i915_private, l3_parity.error_work);
u32 error_status, row, bank, subbank;
char *parity_event[6];
uint32_t misccpctl;
uint8_t slice = 0;
/* We must turn off DOP level clock gating to access the L3 registers.
* In order to prevent a get/put style interface, acquire struct mutex
* any time we access those registers.
*/
mutex_lock(&dev_priv->dev->struct_mutex);
/* If we've screwed up tracking, just let the interrupt fire again */
if (WARN_ON(!dev_priv->l3_parity.which_slice))
goto out;
misccpctl = I915_READ(GEN7_MISCCPCTL);
I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
POSTING_READ(GEN7_MISCCPCTL);
while ((slice = ffs(dev_priv->l3_parity.which_slice)) != 0) {
u32 reg;
slice--;
if (WARN_ON_ONCE(slice >= NUM_L3_SLICES(dev_priv->dev)))
break;
dev_priv->l3_parity.which_slice &= ~(1<<slice);
reg = GEN7_L3CDERRST1 + (slice * 0x200);
error_status = I915_READ(reg);
row = GEN7_PARITY_ERROR_ROW(error_status);
bank = GEN7_PARITY_ERROR_BANK(error_status);
subbank = GEN7_PARITY_ERROR_SUBBANK(error_status);
I915_WRITE(reg, GEN7_PARITY_ERROR_VALID | GEN7_L3CDERRST1_ENABLE);
POSTING_READ(reg);
parity_event[0] = I915_L3_PARITY_UEVENT "=1";
parity_event[1] = kasprintf(GFP_KERNEL, "ROW=%d", row);
parity_event[2] = kasprintf(GFP_KERNEL, "BANK=%d", bank);
parity_event[3] = kasprintf(GFP_KERNEL, "SUBBANK=%d", subbank);
parity_event[4] = kasprintf(GFP_KERNEL, "SLICE=%d", slice);
parity_event[5] = NULL;
kobject_uevent_env(&dev_priv->dev->primary->kdev->kobj,
KOBJ_CHANGE, parity_event);
DRM_DEBUG("Parity error: Slice = %d, Row = %d, Bank = %d, Sub bank = %d.\n",
slice, row, bank, subbank);
kfree(parity_event[4]);
kfree(parity_event[3]);
kfree(parity_event[2]);
kfree(parity_event[1]);
}
I915_WRITE(GEN7_MISCCPCTL, misccpctl);
out:
WARN_ON(dev_priv->l3_parity.which_slice);
spin_lock_irq(&dev_priv->irq_lock);
gen5_enable_gt_irq(dev_priv, GT_PARITY_ERROR(dev_priv->dev));
spin_unlock_irq(&dev_priv->irq_lock);
mutex_unlock(&dev_priv->dev->struct_mutex);
}
static void ivybridge_parity_error_irq_handler(struct drm_device *dev, u32 iir)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (!HAS_L3_DPF(dev))
return;
spin_lock(&dev_priv->irq_lock);
gen5_disable_gt_irq(dev_priv, GT_PARITY_ERROR(dev));
spin_unlock(&dev_priv->irq_lock);
iir &= GT_PARITY_ERROR(dev);
if (iir & GT_RENDER_L3_PARITY_ERROR_INTERRUPT_S1)
dev_priv->l3_parity.which_slice |= 1 << 1;
if (iir & GT_RENDER_L3_PARITY_ERROR_INTERRUPT)
dev_priv->l3_parity.which_slice |= 1 << 0;
queue_work(dev_priv->wq, &dev_priv->l3_parity.error_work);
}
static void ilk_gt_irq_handler(struct drm_device *dev,
struct drm_i915_private *dev_priv,
u32 gt_iir)
{
if (gt_iir &
(GT_RENDER_USER_INTERRUPT | GT_RENDER_PIPECTL_NOTIFY_INTERRUPT))
notify_ring(dev, &dev_priv->ring[RCS]);
if (gt_iir & ILK_BSD_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[VCS]);
}
static void snb_gt_irq_handler(struct drm_device *dev,
struct drm_i915_private *dev_priv,
u32 gt_iir)
{
if (gt_iir &
(GT_RENDER_USER_INTERRUPT | GT_RENDER_PIPECTL_NOTIFY_INTERRUPT))
notify_ring(dev, &dev_priv->ring[RCS]);
if (gt_iir & GT_BSD_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[VCS]);
if (gt_iir & GT_BLT_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[BCS]);
if (gt_iir & (GT_BLT_CS_ERROR_INTERRUPT |
GT_BSD_CS_ERROR_INTERRUPT |
GT_RENDER_CS_MASTER_ERROR_INTERRUPT)) {
i915_handle_error(dev, false, "GT error interrupt 0x%08x",
gt_iir);
}
if (gt_iir & GT_PARITY_ERROR(dev))
ivybridge_parity_error_irq_handler(dev, gt_iir);
}
static void gen8_rps_irq_handler(struct drm_i915_private *dev_priv, u32 pm_iir)
{
if ((pm_iir & dev_priv->pm_rps_events) == 0)
return;
spin_lock(&dev_priv->irq_lock);
dev_priv->rps.pm_iir |= pm_iir & dev_priv->pm_rps_events;
gen8_disable_pm_irq(dev_priv, pm_iir & dev_priv->pm_rps_events);
spin_unlock(&dev_priv->irq_lock);
queue_work(dev_priv->wq, &dev_priv->rps.work);
}
static irqreturn_t gen8_gt_irq_handler(struct drm_device *dev,
struct drm_i915_private *dev_priv,
u32 master_ctl)
{
struct intel_engine_cs *ring;
u32 rcs, bcs, vcs;
uint32_t tmp = 0;
irqreturn_t ret = IRQ_NONE;
if (master_ctl & (GEN8_GT_RCS_IRQ | GEN8_GT_BCS_IRQ)) {
tmp = I915_READ(GEN8_GT_IIR(0));
if (tmp) {
I915_WRITE(GEN8_GT_IIR(0), tmp);
ret = IRQ_HANDLED;
rcs = tmp >> GEN8_RCS_IRQ_SHIFT;
ring = &dev_priv->ring[RCS];
if (rcs & GT_RENDER_USER_INTERRUPT)
notify_ring(dev, ring);
if (rcs & GT_CONTEXT_SWITCH_INTERRUPT)
intel_execlists_handle_ctx_events(ring);
bcs = tmp >> GEN8_BCS_IRQ_SHIFT;
ring = &dev_priv->ring[BCS];
if (bcs & GT_RENDER_USER_INTERRUPT)
notify_ring(dev, ring);
if (bcs & GT_CONTEXT_SWITCH_INTERRUPT)
intel_execlists_handle_ctx_events(ring);
} else
DRM_ERROR("The master control interrupt lied (GT0)!\n");
}
if (master_ctl & (GEN8_GT_VCS1_IRQ | GEN8_GT_VCS2_IRQ)) {
tmp = I915_READ(GEN8_GT_IIR(1));
if (tmp) {
I915_WRITE(GEN8_GT_IIR(1), tmp);
ret = IRQ_HANDLED;
vcs = tmp >> GEN8_VCS1_IRQ_SHIFT;
ring = &dev_priv->ring[VCS];
if (vcs & GT_RENDER_USER_INTERRUPT)
notify_ring(dev, ring);
if (vcs & GT_CONTEXT_SWITCH_INTERRUPT)
intel_execlists_handle_ctx_events(ring);
vcs = tmp >> GEN8_VCS2_IRQ_SHIFT;
ring = &dev_priv->ring[VCS2];
if (vcs & GT_RENDER_USER_INTERRUPT)
notify_ring(dev, ring);
if (vcs & GT_CONTEXT_SWITCH_INTERRUPT)
intel_execlists_handle_ctx_events(ring);
} else
DRM_ERROR("The master control interrupt lied (GT1)!\n");
}
if (master_ctl & GEN8_GT_PM_IRQ) {
tmp = I915_READ(GEN8_GT_IIR(2));
if (tmp & dev_priv->pm_rps_events) {
I915_WRITE(GEN8_GT_IIR(2),
tmp & dev_priv->pm_rps_events);
ret = IRQ_HANDLED;
gen8_rps_irq_handler(dev_priv, tmp);
} else
DRM_ERROR("The master control interrupt lied (PM)!\n");
}
if (master_ctl & GEN8_GT_VECS_IRQ) {
tmp = I915_READ(GEN8_GT_IIR(3));
if (tmp) {
I915_WRITE(GEN8_GT_IIR(3), tmp);
ret = IRQ_HANDLED;
vcs = tmp >> GEN8_VECS_IRQ_SHIFT;
ring = &dev_priv->ring[VECS];
if (vcs & GT_RENDER_USER_INTERRUPT)
notify_ring(dev, ring);
if (vcs & GT_CONTEXT_SWITCH_INTERRUPT)
intel_execlists_handle_ctx_events(ring);
} else
DRM_ERROR("The master control interrupt lied (GT3)!\n");
}
return ret;
}
#define HPD_STORM_DETECT_PERIOD 1000
#define HPD_STORM_THRESHOLD 5
static int ilk_port_to_hotplug_shift(enum port port)
{
switch (port) {
case PORT_A:
case PORT_E:
default:
return -1;
case PORT_B:
return 0;
case PORT_C:
return 8;
case PORT_D:
return 16;
}
}
static int g4x_port_to_hotplug_shift(enum port port)
{
switch (port) {
case PORT_A:
case PORT_E:
default:
return -1;
case PORT_B:
return 17;
case PORT_C:
return 19;
case PORT_D:
return 21;
}
}
static inline enum port get_port_from_pin(enum hpd_pin pin)
{
switch (pin) {
case HPD_PORT_B:
return PORT_B;
case HPD_PORT_C:
return PORT_C;
case HPD_PORT_D:
return PORT_D;
default:
return PORT_A; /* no hpd */
}
}
static inline void intel_hpd_irq_handler(struct drm_device *dev,
u32 hotplug_trigger,
u32 dig_hotplug_reg,
const u32 *hpd)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int i;
enum port port;
bool storm_detected = false;
bool queue_dig = false, queue_hp = false;
u32 dig_shift;
u32 dig_port_mask = 0;
if (!hotplug_trigger)
return;
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x, dig 0x%08x\n",
hotplug_trigger, dig_hotplug_reg);
spin_lock(&dev_priv->irq_lock);
for (i = 1; i < HPD_NUM_PINS; i++) {
if (!(hpd[i] & hotplug_trigger))
continue;
port = get_port_from_pin(i);
if (port && dev_priv->hpd_irq_port[port]) {
bool long_hpd;
if (IS_G4X(dev)) {
dig_shift = g4x_port_to_hotplug_shift(port);
long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
} else {
dig_shift = ilk_port_to_hotplug_shift(port);
long_hpd = (dig_hotplug_reg >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
}
DRM_DEBUG_DRIVER("digital hpd port %c - %s\n",
port_name(port),
long_hpd ? "long" : "short");
/* for long HPD pulses we want to have the digital queue happen,
but we still want HPD storm detection to function. */
if (long_hpd) {
dev_priv->long_hpd_port_mask |= (1 << port);
dig_port_mask |= hpd[i];
} else {
/* for short HPD just trigger the digital queue */
dev_priv->short_hpd_port_mask |= (1 << port);
hotplug_trigger &= ~hpd[i];
}
queue_dig = true;
}
}
for (i = 1; i < HPD_NUM_PINS; i++) {
if (hpd[i] & hotplug_trigger &&
dev_priv->hpd_stats[i].hpd_mark == HPD_DISABLED) {
/*
* On GMCH platforms the interrupt mask bits only
* prevent irq generation, not the setting of the
* hotplug bits itself. So only WARN about unexpected
* interrupts on saner platforms.
*/
WARN_ONCE(INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev),
"Received HPD interrupt (0x%08x) on pin %d (0x%08x) although disabled\n",
hotplug_trigger, i, hpd[i]);
continue;
}
if (!(hpd[i] & hotplug_trigger) ||
dev_priv->hpd_stats[i].hpd_mark != HPD_ENABLED)
continue;
if (!(dig_port_mask & hpd[i])) {
dev_priv->hpd_event_bits |= (1 << i);
queue_hp = true;
}
if (!time_in_range(jiffies, dev_priv->hpd_stats[i].hpd_last_jiffies,
dev_priv->hpd_stats[i].hpd_last_jiffies
+ msecs_to_jiffies(HPD_STORM_DETECT_PERIOD))) {
dev_priv->hpd_stats[i].hpd_last_jiffies = jiffies;
dev_priv->hpd_stats[i].hpd_cnt = 0;
DRM_DEBUG_KMS("Received HPD interrupt on PIN %d - cnt: 0\n", i);
} else if (dev_priv->hpd_stats[i].hpd_cnt > HPD_STORM_THRESHOLD) {
dev_priv->hpd_stats[i].hpd_mark = HPD_MARK_DISABLED;
dev_priv->hpd_event_bits &= ~(1 << i);
DRM_DEBUG_KMS("HPD interrupt storm detected on PIN %d\n", i);
storm_detected = true;
} else {
dev_priv->hpd_stats[i].hpd_cnt++;
DRM_DEBUG_KMS("Received HPD interrupt on PIN %d - cnt: %d\n", i,
dev_priv->hpd_stats[i].hpd_cnt);
}
}
if (storm_detected)
dev_priv->display.hpd_irq_setup(dev);
spin_unlock(&dev_priv->irq_lock);
/*
* Our hotplug handler can grab modeset locks (by calling down into the
* fb helpers). Hence it must not be run on our own dev-priv->wq work
* queue for otherwise the flush_work in the pageflip code will
* deadlock.
*/
if (queue_dig)
queue_work(dev_priv->dp_wq, &dev_priv->dig_port_work);
if (queue_hp)
schedule_work(&dev_priv->hotplug_work);
}
static void gmbus_irq_handler(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
wake_up_all(&dev_priv->gmbus_wait_queue);
}
static void dp_aux_irq_handler(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
wake_up_all(&dev_priv->gmbus_wait_queue);
}
#if defined(CONFIG_DEBUG_FS)
static void display_pipe_crc_irq_handler(struct drm_device *dev, enum pipe pipe,
uint32_t crc0, uint32_t crc1,
uint32_t crc2, uint32_t crc3,
uint32_t crc4)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_pipe_crc *pipe_crc = &dev_priv->pipe_crc[pipe];
struct intel_pipe_crc_entry *entry;
int head, tail;
spin_lock(&pipe_crc->lock);
if (!pipe_crc->entries) {
spin_unlock(&pipe_crc->lock);
DRM_ERROR("spurious interrupt\n");
return;
}
head = pipe_crc->head;
tail = pipe_crc->tail;
if (CIRC_SPACE(head, tail, INTEL_PIPE_CRC_ENTRIES_NR) < 1) {
spin_unlock(&pipe_crc->lock);
DRM_ERROR("CRC buffer overflowing\n");
return;
}
entry = &pipe_crc->entries[head];
entry->frame = dev->driver->get_vblank_counter(dev, pipe);
entry->crc[0] = crc0;
entry->crc[1] = crc1;
entry->crc[2] = crc2;
entry->crc[3] = crc3;
entry->crc[4] = crc4;
head = (head + 1) & (INTEL_PIPE_CRC_ENTRIES_NR - 1);
pipe_crc->head = head;
spin_unlock(&pipe_crc->lock);
wake_up_interruptible(&pipe_crc->wq);
}
#else
static inline void
display_pipe_crc_irq_handler(struct drm_device *dev, enum pipe pipe,
uint32_t crc0, uint32_t crc1,
uint32_t crc2, uint32_t crc3,
uint32_t crc4) {}
#endif
static void hsw_pipe_crc_irq_handler(struct drm_device *dev, enum pipe pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
display_pipe_crc_irq_handler(dev, pipe,
I915_READ(PIPE_CRC_RES_1_IVB(pipe)),
0, 0, 0, 0);
}
static void ivb_pipe_crc_irq_handler(struct drm_device *dev, enum pipe pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
display_pipe_crc_irq_handler(dev, pipe,
I915_READ(PIPE_CRC_RES_1_IVB(pipe)),
I915_READ(PIPE_CRC_RES_2_IVB(pipe)),
I915_READ(PIPE_CRC_RES_3_IVB(pipe)),
I915_READ(PIPE_CRC_RES_4_IVB(pipe)),
I915_READ(PIPE_CRC_RES_5_IVB(pipe)));
}
static void i9xx_pipe_crc_irq_handler(struct drm_device *dev, enum pipe pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t res1, res2;
if (INTEL_INFO(dev)->gen >= 3)
res1 = I915_READ(PIPE_CRC_RES_RES1_I915(pipe));
else
res1 = 0;
if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev))
res2 = I915_READ(PIPE_CRC_RES_RES2_G4X(pipe));
else
res2 = 0;
display_pipe_crc_irq_handler(dev, pipe,
I915_READ(PIPE_CRC_RES_RED(pipe)),
I915_READ(PIPE_CRC_RES_GREEN(pipe)),
I915_READ(PIPE_CRC_RES_BLUE(pipe)),
res1, res2);
}
void gen8_flip_interrupt(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (!dev_priv->rps.is_bdw_sw_turbo)
return;
if(atomic_read(&dev_priv->rps.sw_turbo.flip_received)) {
mod_timer(&dev_priv->rps.sw_turbo.flip_timer,
usecs_to_jiffies(dev_priv->rps.sw_turbo.timeout) + jiffies);
}
else {
dev_priv->rps.sw_turbo.flip_timer.expires =
usecs_to_jiffies(dev_priv->rps.sw_turbo.timeout) + jiffies;
add_timer(&dev_priv->rps.sw_turbo.flip_timer);
atomic_set(&dev_priv->rps.sw_turbo.flip_received, true);
}
bdw_software_turbo(dev);
}
/* The RPS events need forcewake, so we add them to a work queue and mask their
* IMR bits until the work is done. Other interrupts can be processed without
* the work queue. */
static void gen6_rps_irq_handler(struct drm_i915_private *dev_priv, u32 pm_iir)
{
if (pm_iir & dev_priv->pm_rps_events) {
spin_lock(&dev_priv->irq_lock);
dev_priv->rps.pm_iir |= pm_iir & dev_priv->pm_rps_events;
gen6_disable_pm_irq(dev_priv, pm_iir & dev_priv->pm_rps_events);
spin_unlock(&dev_priv->irq_lock);
queue_work(dev_priv->wq, &dev_priv->rps.work);
}
if (HAS_VEBOX(dev_priv->dev)) {
if (pm_iir & PM_VEBOX_USER_INTERRUPT)
notify_ring(dev_priv->dev, &dev_priv->ring[VECS]);
if (pm_iir & PM_VEBOX_CS_ERROR_INTERRUPT) {
i915_handle_error(dev_priv->dev, false,
"VEBOX CS error interrupt 0x%08x",
pm_iir);
}
}
}
static bool intel_pipe_handle_vblank(struct drm_device *dev, enum pipe pipe)
{
if (!drm_handle_vblank(dev, pipe))
return false;
return true;
}
static void valleyview_pipestat_irq_handler(struct drm_device *dev, u32 iir)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pipe_stats[I915_MAX_PIPES] = { };
int pipe;
spin_lock(&dev_priv->irq_lock);
for_each_pipe(dev_priv, pipe) {
int reg;
u32 mask, iir_bit = 0;
/*
* PIPESTAT bits get signalled even when the interrupt is
* disabled with the mask bits, and some of the status bits do
* not generate interrupts at all (like the underrun bit). Hence
* we need to be careful that we only handle what we want to
* handle.
*/
mask = 0;
if (__cpu_fifo_underrun_reporting_enabled(dev, pipe))
mask |= PIPE_FIFO_UNDERRUN_STATUS;
switch (pipe) {
case PIPE_A:
iir_bit = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
break;
case PIPE_B:
iir_bit = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
break;
case PIPE_C:
iir_bit = I915_DISPLAY_PIPE_C_EVENT_INTERRUPT;
break;
}
if (iir & iir_bit)
mask |= dev_priv->pipestat_irq_mask[pipe];
if (!mask)
continue;
reg = PIPESTAT(pipe);
mask |= PIPESTAT_INT_ENABLE_MASK;
pipe_stats[pipe] = I915_READ(reg) & mask;
/*
* Clear the PIPE*STAT regs before the IIR
*/
if (pipe_stats[pipe] & (PIPE_FIFO_UNDERRUN_STATUS |
PIPESTAT_INT_STATUS_MASK))
I915_WRITE(reg, pipe_stats[pipe]);
}
spin_unlock(&dev_priv->irq_lock);
for_each_pipe(dev_priv, pipe) {
if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS &&
intel_pipe_handle_vblank(dev, pipe))
intel_check_page_flip(dev, pipe);
if (pipe_stats[pipe] & PLANE_FLIP_DONE_INT_STATUS_VLV) {
intel_prepare_page_flip(dev, pipe);
intel_finish_page_flip(dev, pipe);
}
if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS)
i9xx_pipe_crc_irq_handler(dev, pipe);
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS &&
intel_set_cpu_fifo_underrun_reporting(dev, pipe, false))
DRM_ERROR("pipe %c underrun\n", pipe_name(pipe));
}
if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS)
gmbus_irq_handler(dev);
}
static void i9xx_hpd_irq_handler(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
if (hotplug_status) {
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
/*
* Make sure hotplug status is cleared before we clear IIR, or else we
* may miss hotplug events.
*/
POSTING_READ(PORT_HOTPLUG_STAT);
if (IS_G4X(dev)) {
u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_G4X;
intel_hpd_irq_handler(dev, hotplug_trigger, 0, hpd_status_g4x);
} else {
u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915;
intel_hpd_irq_handler(dev, hotplug_trigger, 0, hpd_status_i915);
}
if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)) &&
hotplug_status & DP_AUX_CHANNEL_MASK_INT_STATUS_G4X)
dp_aux_irq_handler(dev);
}
}
static irqreturn_t valleyview_irq_handler(int irq, void *arg)
{
struct drm_device *dev = arg;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 iir, gt_iir, pm_iir;
irqreturn_t ret = IRQ_NONE;
while (true) {
/* Find, clear, then process each source of interrupt */
gt_iir = I915_READ(GTIIR);
if (gt_iir)
I915_WRITE(GTIIR, gt_iir);
pm_iir = I915_READ(GEN6_PMIIR);
if (pm_iir)
I915_WRITE(GEN6_PMIIR, pm_iir);
iir = I915_READ(VLV_IIR);
if (iir) {
/* Consume port before clearing IIR or we'll miss events */
if (iir & I915_DISPLAY_PORT_INTERRUPT)
i9xx_hpd_irq_handler(dev);
I915_WRITE(VLV_IIR, iir);
}
if (gt_iir == 0 && pm_iir == 0 && iir == 0)
goto out;
ret = IRQ_HANDLED;
if (gt_iir)
snb_gt_irq_handler(dev, dev_priv, gt_iir);
if (pm_iir)
gen6_rps_irq_handler(dev_priv, pm_iir);
/* Call regardless, as some status bits might not be
* signalled in iir */
valleyview_pipestat_irq_handler(dev, iir);
}
out:
return ret;
}
static irqreturn_t cherryview_irq_handler(int irq, void *arg)
{
struct drm_device *dev = arg;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 master_ctl, iir;
irqreturn_t ret = IRQ_NONE;
for (;;) {
master_ctl = I915_READ(GEN8_MASTER_IRQ) & ~GEN8_MASTER_IRQ_CONTROL;
iir = I915_READ(VLV_IIR);
if (master_ctl == 0 && iir == 0)
break;
ret = IRQ_HANDLED;
I915_WRITE(GEN8_MASTER_IRQ, 0);
/* Find, clear, then process each source of interrupt */
if (iir) {
/* Consume port before clearing IIR or we'll miss events */
if (iir & I915_DISPLAY_PORT_INTERRUPT)
i9xx_hpd_irq_handler(dev);
I915_WRITE(VLV_IIR, iir);
}
gen8_gt_irq_handler(dev, dev_priv, master_ctl);
/* Call regardless, as some status bits might not be
* signalled in iir */
valleyview_pipestat_irq_handler(dev, iir);
I915_WRITE(GEN8_MASTER_IRQ, DE_MASTER_IRQ_CONTROL);
POSTING_READ(GEN8_MASTER_IRQ);
}
return ret;
}
static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK;
u32 dig_hotplug_reg;
dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
intel_hpd_irq_handler(dev, hotplug_trigger, dig_hotplug_reg, hpd_ibx);
if (pch_iir & SDE_AUDIO_POWER_MASK) {
int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK) >>
SDE_AUDIO_POWER_SHIFT);
DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
port_name(port));
}
if (pch_iir & SDE_AUX_MASK)
dp_aux_irq_handler(dev);
if (pch_iir & SDE_GMBUS)
gmbus_irq_handler(dev);
if (pch_iir & SDE_AUDIO_HDCP_MASK)
DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n");
if (pch_iir & SDE_AUDIO_TRANS_MASK)
DRM_DEBUG_DRIVER("PCH transcoder audio interrupt\n");
if (pch_iir & SDE_POISON)
DRM_ERROR("PCH poison interrupt\n");
if (pch_iir & SDE_FDI_MASK)
for_each_pipe(dev_priv, pipe)
DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n",
pipe_name(pipe),
I915_READ(FDI_RX_IIR(pipe)));
if (pch_iir & (SDE_TRANSB_CRC_DONE | SDE_TRANSA_CRC_DONE))
DRM_DEBUG_DRIVER("PCH transcoder CRC done interrupt\n");
if (pch_iir & (SDE_TRANSB_CRC_ERR | SDE_TRANSA_CRC_ERR))
DRM_DEBUG_DRIVER("PCH transcoder CRC error interrupt\n");
if (pch_iir & SDE_TRANSA_FIFO_UNDER)
if (intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A,
false))
DRM_ERROR("PCH transcoder A FIFO underrun\n");
if (pch_iir & SDE_TRANSB_FIFO_UNDER)
if (intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_B,
false))
DRM_ERROR("PCH transcoder B FIFO underrun\n");
}
static void ivb_err_int_handler(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 err_int = I915_READ(GEN7_ERR_INT);
enum pipe pipe;
if (err_int & ERR_INT_POISON)
DRM_ERROR("Poison interrupt\n");
for_each_pipe(dev_priv, pipe) {
if (err_int & ERR_INT_FIFO_UNDERRUN(pipe)) {
if (intel_set_cpu_fifo_underrun_reporting(dev, pipe,
false))
DRM_ERROR("Pipe %c FIFO underrun\n",
pipe_name(pipe));
}
if (err_int & ERR_INT_PIPE_CRC_DONE(pipe)) {
if (IS_IVYBRIDGE(dev))
ivb_pipe_crc_irq_handler(dev, pipe);
else
hsw_pipe_crc_irq_handler(dev, pipe);
}
}
I915_WRITE(GEN7_ERR_INT, err_int);
}
static void cpt_serr_int_handler(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 serr_int = I915_READ(SERR_INT);
if (serr_int & SERR_INT_POISON)
DRM_ERROR("PCH poison interrupt\n");
if (serr_int & SERR_INT_TRANS_A_FIFO_UNDERRUN)
if (intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A,
false))
DRM_ERROR("PCH transcoder A FIFO underrun\n");
if (serr_int & SERR_INT_TRANS_B_FIFO_UNDERRUN)
if (intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_B,
false))
DRM_ERROR("PCH transcoder B FIFO underrun\n");
if (serr_int & SERR_INT_TRANS_C_FIFO_UNDERRUN)
if (intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_C,
false))
DRM_ERROR("PCH transcoder C FIFO underrun\n");
I915_WRITE(SERR_INT, serr_int);
}
static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_CPT;
u32 dig_hotplug_reg;
dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
intel_hpd_irq_handler(dev, hotplug_trigger, dig_hotplug_reg, hpd_cpt);
if (pch_iir & SDE_AUDIO_POWER_MASK_CPT) {
int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK_CPT) >>
SDE_AUDIO_POWER_SHIFT_CPT);
DRM_DEBUG_DRIVER("PCH audio power change on port %c\n",
port_name(port));
}
if (pch_iir & SDE_AUX_MASK_CPT)
dp_aux_irq_handler(dev);
if (pch_iir & SDE_GMBUS_CPT)
gmbus_irq_handler(dev);
if (pch_iir & SDE_AUDIO_CP_REQ_CPT)
DRM_DEBUG_DRIVER("Audio CP request interrupt\n");
if (pch_iir & SDE_AUDIO_CP_CHG_CPT)
DRM_DEBUG_DRIVER("Audio CP change interrupt\n");
if (pch_iir & SDE_FDI_MASK_CPT)
for_each_pipe(dev_priv, pipe)
DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n",
pipe_name(pipe),
I915_READ(FDI_RX_IIR(pipe)));
if (pch_iir & SDE_ERROR_CPT)
cpt_serr_int_handler(dev);
}
static void ilk_display_irq_handler(struct drm_device *dev, u32 de_iir)
{
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe;
if (de_iir & DE_AUX_CHANNEL_A)
dp_aux_irq_handler(dev);
if (de_iir & DE_GSE)
intel_opregion_asle_intr(dev);
if (de_iir & DE_POISON)
DRM_ERROR("Poison interrupt\n");
for_each_pipe(dev_priv, pipe) {
if (de_iir & DE_PIPE_VBLANK(pipe) &&
intel_pipe_handle_vblank(dev, pipe))
intel_check_page_flip(dev, pipe);
if (de_iir & DE_PIPE_FIFO_UNDERRUN(pipe))
if (intel_set_cpu_fifo_underrun_reporting(dev, pipe, false))
DRM_ERROR("Pipe %c FIFO underrun\n",
pipe_name(pipe));
if (de_iir & DE_PIPE_CRC_DONE(pipe))
i9xx_pipe_crc_irq_handler(dev, pipe);
/* plane/pipes map 1:1 on ilk+ */
if (de_iir & DE_PLANE_FLIP_DONE(pipe)) {
intel_prepare_page_flip(dev, pipe);
intel_finish_page_flip_plane(dev, pipe);
}
}
/* check event from PCH */
if (de_iir & DE_PCH_EVENT) {
u32 pch_iir = I915_READ(SDEIIR);
if (HAS_PCH_CPT(dev))
cpt_irq_handler(dev, pch_iir);
else
ibx_irq_handler(dev, pch_iir);
/* should clear PCH hotplug event before clear CPU irq */
I915_WRITE(SDEIIR, pch_iir);
}
if (IS_GEN5(dev) && de_iir & DE_PCU_EVENT)
ironlake_rps_change_irq_handler(dev);
}
static void ivb_display_irq_handler(struct drm_device *dev, u32 de_iir)
{
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe;
if (de_iir & DE_ERR_INT_IVB)
ivb_err_int_handler(dev);
if (de_iir & DE_AUX_CHANNEL_A_IVB)
dp_aux_irq_handler(dev);
if (de_iir & DE_GSE_IVB)
intel_opregion_asle_intr(dev);
for_each_pipe(dev_priv, pipe) {
if (de_iir & (DE_PIPE_VBLANK_IVB(pipe)) &&
intel_pipe_handle_vblank(dev, pipe))
intel_check_page_flip(dev, pipe);
/* plane/pipes map 1:1 on ilk+ */
if (de_iir & DE_PLANE_FLIP_DONE_IVB(pipe)) {
intel_prepare_page_flip(dev, pipe);
intel_finish_page_flip_plane(dev, pipe);
}
}
/* check event from PCH */
if (!HAS_PCH_NOP(dev) && (de_iir & DE_PCH_EVENT_IVB)) {
u32 pch_iir = I915_READ(SDEIIR);
cpt_irq_handler(dev, pch_iir);
/* clear PCH hotplug event before clear CPU irq */
I915_WRITE(SDEIIR, pch_iir);
}
}
/*
* To handle irqs with the minimum potential races with fresh interrupts, we:
* 1 - Disable Master Interrupt Control.
* 2 - Find the source(s) of the interrupt.
* 3 - Clear the Interrupt Identity bits (IIR).
* 4 - Process the interrupt(s) that had bits set in the IIRs.
* 5 - Re-enable Master Interrupt Control.
*/
static irqreturn_t ironlake_irq_handler(int irq, void *arg)
{
struct drm_device *dev = arg;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 de_iir, gt_iir, de_ier, sde_ier = 0;
irqreturn_t ret = IRQ_NONE;
/* We get interrupts on unclaimed registers, so check for this before we
* do any I915_{READ,WRITE}. */
intel_uncore_check_errors(dev);
/* disable master interrupt before clearing iir */
de_ier = I915_READ(DEIER);
I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL);
POSTING_READ(DEIER);
/* Disable south interrupts. We'll only write to SDEIIR once, so further
* interrupts will will be stored on its back queue, and then we'll be
* able to process them after we restore SDEIER (as soon as we restore
* it, we'll get an interrupt if SDEIIR still has something to process
* due to its back queue). */
if (!HAS_PCH_NOP(dev)) {
sde_ier = I915_READ(SDEIER);
I915_WRITE(SDEIER, 0);
POSTING_READ(SDEIER);
}
/* Find, clear, then process each source of interrupt */
gt_iir = I915_READ(GTIIR);
if (gt_iir) {
I915_WRITE(GTIIR, gt_iir);
ret = IRQ_HANDLED;
if (INTEL_INFO(dev)->gen >= 6)
snb_gt_irq_handler(dev, dev_priv, gt_iir);
else
ilk_gt_irq_handler(dev, dev_priv, gt_iir);
}
de_iir = I915_READ(DEIIR);
if (de_iir) {
I915_WRITE(DEIIR, de_iir);
ret = IRQ_HANDLED;
if (INTEL_INFO(dev)->gen >= 7)
ivb_display_irq_handler(dev, de_iir);
else
ilk_display_irq_handler(dev, de_iir);
}
if (INTEL_INFO(dev)->gen >= 6) {
u32 pm_iir = I915_READ(GEN6_PMIIR);
if (pm_iir) {
I915_WRITE(GEN6_PMIIR, pm_iir);
ret = IRQ_HANDLED;
gen6_rps_irq_handler(dev_priv, pm_iir);
}
}
I915_WRITE(DEIER, de_ier);
POSTING_READ(DEIER);
if (!HAS_PCH_NOP(dev)) {
I915_WRITE(SDEIER, sde_ier);
POSTING_READ(SDEIER);
}
return ret;
}
static irqreturn_t gen8_irq_handler(int irq, void *arg)
{
struct drm_device *dev = arg;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 master_ctl;
irqreturn_t ret = IRQ_NONE;
uint32_t tmp = 0;
enum pipe pipe;
master_ctl = I915_READ(GEN8_MASTER_IRQ);
master_ctl &= ~GEN8_MASTER_IRQ_CONTROL;
if (!master_ctl)
return IRQ_NONE;
I915_WRITE(GEN8_MASTER_IRQ, 0);
POSTING_READ(GEN8_MASTER_IRQ);
/* Find, clear, then process each source of interrupt */
ret = gen8_gt_irq_handler(dev, dev_priv, master_ctl);
if (master_ctl & GEN8_DE_MISC_IRQ) {
tmp = I915_READ(GEN8_DE_MISC_IIR);
if (tmp) {
I915_WRITE(GEN8_DE_MISC_IIR, tmp);
ret = IRQ_HANDLED;
if (tmp & GEN8_DE_MISC_GSE)
intel_opregion_asle_intr(dev);
else
DRM_ERROR("Unexpected DE Misc interrupt\n");
}
else
DRM_ERROR("The master control interrupt lied (DE MISC)!\n");
}
if (master_ctl & GEN8_DE_PORT_IRQ) {
tmp = I915_READ(GEN8_DE_PORT_IIR);
if (tmp) {
I915_WRITE(GEN8_DE_PORT_IIR, tmp);
ret = IRQ_HANDLED;
if (tmp & GEN8_AUX_CHANNEL_A)
dp_aux_irq_handler(dev);
else
DRM_ERROR("Unexpected DE Port interrupt\n");
}
else
DRM_ERROR("The master control interrupt lied (DE PORT)!\n");
}
for_each_pipe(dev_priv, pipe) {
uint32_t pipe_iir, flip_done = 0, fault_errors = 0;
if (!(master_ctl & GEN8_DE_PIPE_IRQ(pipe)))
continue;
pipe_iir = I915_READ(GEN8_DE_PIPE_IIR(pipe));
if (pipe_iir) {
ret = IRQ_HANDLED;
I915_WRITE(GEN8_DE_PIPE_IIR(pipe), pipe_iir);
if (pipe_iir & GEN8_PIPE_VBLANK &&
intel_pipe_handle_vblank(dev, pipe))
intel_check_page_flip(dev, pipe);
if (IS_GEN9(dev))
flip_done = pipe_iir & GEN9_PIPE_PLANE1_FLIP_DONE;
else
flip_done = pipe_iir & GEN8_PIPE_PRIMARY_FLIP_DONE;
if (flip_done) {
intel_prepare_page_flip(dev, pipe);
intel_finish_page_flip_plane(dev, pipe);
}
if (pipe_iir & GEN8_PIPE_CDCLK_CRC_DONE)
hsw_pipe_crc_irq_handler(dev, pipe);
if (pipe_iir & GEN8_PIPE_FIFO_UNDERRUN) {
if (intel_set_cpu_fifo_underrun_reporting(dev, pipe,
false))
DRM_ERROR("Pipe %c FIFO underrun\n",
pipe_name(pipe));
}
if (IS_GEN9(dev))
fault_errors = pipe_iir & GEN9_DE_PIPE_IRQ_FAULT_ERRORS;
else
fault_errors = pipe_iir & GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
if (fault_errors)
DRM_ERROR("Fault errors on pipe %c\n: 0x%08x",
pipe_name(pipe),
pipe_iir & GEN8_DE_PIPE_IRQ_FAULT_ERRORS);
} else
DRM_ERROR("The master control interrupt lied (DE PIPE)!\n");
}
if (!HAS_PCH_NOP(dev) && master_ctl & GEN8_DE_PCH_IRQ) {
/*
* FIXME(BDW): Assume for now that the new interrupt handling
* scheme also closed the SDE interrupt handling race we've seen
* on older pch-split platforms. But this needs testing.
*/
u32 pch_iir = I915_READ(SDEIIR);
if (pch_iir) {
I915_WRITE(SDEIIR, pch_iir);
ret = IRQ_HANDLED;
cpt_irq_handler(dev, pch_iir);
} else
DRM_ERROR("The master control interrupt lied (SDE)!\n");
}
I915_WRITE(GEN8_MASTER_IRQ, GEN8_MASTER_IRQ_CONTROL);
POSTING_READ(GEN8_MASTER_IRQ);
return ret;
}
static void i915_error_wake_up(struct drm_i915_private *dev_priv,
bool reset_completed)
{
struct intel_engine_cs *ring;
int i;
/*
* Notify all waiters for GPU completion events that reset state has
* been changed, and that they need to restart their wait after
* checking for potential errors (and bail out to drop locks if there is
* a gpu reset pending so that i915_error_work_func can acquire them).
*/
/* Wake up __wait_seqno, potentially holding dev->struct_mutex. */
for_each_ring(ring, dev_priv, i)
wake_up_all(&ring->irq_queue);
/* Wake up intel_crtc_wait_for_pending_flips, holding crtc->mutex. */
wake_up_all(&dev_priv->pending_flip_queue);
/*
* Signal tasks blocked in i915_gem_wait_for_error that the pending
* reset state is cleared.
*/
if (reset_completed)
wake_up_all(&dev_priv->gpu_error.reset_queue);
}
/**
* i915_error_work_func - do process context error handling work
* @work: work struct
*
* Fire an error uevent so userspace can see that a hang or error
* was detected.
*/
static void i915_error_work_func(struct work_struct *work)
{
struct i915_gpu_error *error = container_of(work, struct i915_gpu_error,
work);
struct drm_i915_private *dev_priv =
container_of(error, struct drm_i915_private, gpu_error);
struct drm_device *dev = dev_priv->dev;
char *error_event[] = { I915_ERROR_UEVENT "=1", NULL };
char *reset_event[] = { I915_RESET_UEVENT "=1", NULL };
char *reset_done_event[] = { I915_ERROR_UEVENT "=0", NULL };
int ret;
kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE, error_event);
/*
* Note that there's only one work item which does gpu resets, so we
* need not worry about concurrent gpu resets potentially incrementing
* error->reset_counter twice. We only need to take care of another
* racing irq/hangcheck declaring the gpu dead for a second time. A
* quick check for that is good enough: schedule_work ensures the
* correct ordering between hang detection and this work item, and since
* the reset in-progress bit is only ever set by code outside of this
* work we don't need to worry about any other races.
*/
if (i915_reset_in_progress(error) && !i915_terminally_wedged(error)) {
DRM_DEBUG_DRIVER("resetting chip\n");
kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE,
reset_event);
/*
* In most cases it's guaranteed that we get here with an RPM
* reference held, for example because there is a pending GPU
* request that won't finish until the reset is done. This
* isn't the case at least when we get here by doing a
* simulated reset via debugs, so get an RPM reference.
*/
intel_runtime_pm_get(dev_priv);
/*
* All state reset _must_ be completed before we update the
* reset counter, for otherwise waiters might miss the reset
* pending state and not properly drop locks, resulting in
* deadlocks with the reset work.
*/
ret = i915_reset(dev);
intel_display_handle_reset(dev);
intel_runtime_pm_put(dev_priv);
if (ret == 0) {
/*
* After all the gem state is reset, increment the reset
* counter and wake up everyone waiting for the reset to
* complete.
*
* Since unlock operations are a one-sided barrier only,
* we need to insert a barrier here to order any seqno
* updates before
* the counter increment.
*/
smp_mb__before_atomic();
atomic_inc(&dev_priv->gpu_error.reset_counter);
kobject_uevent_env(&dev->primary->kdev->kobj,
KOBJ_CHANGE, reset_done_event);
} else {
atomic_set_mask(I915_WEDGED, &error->reset_counter);
}
/*
* Note: The wake_up also serves as a memory barrier so that
* waiters see the update value of the reset counter atomic_t.
*/
i915_error_wake_up(dev_priv, true);
}
}
static void i915_report_and_clear_eir(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t instdone[I915_NUM_INSTDONE_REG];
u32 eir = I915_READ(EIR);
int pipe, i;
if (!eir)
return;
pr_err("render error detected, EIR: 0x%08x\n", eir);
i915_get_extra_instdone(dev, instdone);
if (IS_G4X(dev)) {
if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) {
u32 ipeir = I915_READ(IPEIR_I965);
pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965));
pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965));
for (i = 0; i < ARRAY_SIZE(instdone); i++)
pr_err(" INSTDONE_%d: 0x%08x\n", i, instdone[i]);
pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS));
pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965));
I915_WRITE(IPEIR_I965, ipeir);
POSTING_READ(IPEIR_I965);
}
if (eir & GM45_ERROR_PAGE_TABLE) {
u32 pgtbl_err = I915_READ(PGTBL_ER);
pr_err("page table error\n");
pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err);
I915_WRITE(PGTBL_ER, pgtbl_err);
POSTING_READ(PGTBL_ER);
}
}
if (!IS_GEN2(dev)) {
if (eir & I915_ERROR_PAGE_TABLE) {
u32 pgtbl_err = I915_READ(PGTBL_ER);
pr_err("page table error\n");
pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err);
I915_WRITE(PGTBL_ER, pgtbl_err);
POSTING_READ(PGTBL_ER);
}
}
if (eir & I915_ERROR_MEMORY_REFRESH) {
pr_err("memory refresh error:\n");
for_each_pipe(dev_priv, pipe)
pr_err("pipe %c stat: 0x%08x\n",
pipe_name(pipe), I915_READ(PIPESTAT(pipe)));
/* pipestat has already been acked */
}
if (eir & I915_ERROR_INSTRUCTION) {
pr_err("instruction error\n");
pr_err(" INSTPM: 0x%08x\n", I915_READ(INSTPM));
for (i = 0; i < ARRAY_SIZE(instdone); i++)
pr_err(" INSTDONE_%d: 0x%08x\n", i, instdone[i]);
if (INTEL_INFO(dev)->gen < 4) {
u32 ipeir = I915_READ(IPEIR);
pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR));
pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR));
pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD));
I915_WRITE(IPEIR, ipeir);
POSTING_READ(IPEIR);
} else {
u32 ipeir = I915_READ(IPEIR_I965);
pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965));
pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965));
pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS));
pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965));
I915_WRITE(IPEIR_I965, ipeir);
POSTING_READ(IPEIR_I965);
}
}
I915_WRITE(EIR, eir);
POSTING_READ(EIR);
eir = I915_READ(EIR);
if (eir) {
/*
* some errors might have become stuck,
* mask them.
*/
DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir);
I915_WRITE(EMR, I915_READ(EMR) | eir);
I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
}
}
/**
* i915_handle_error - handle an error interrupt
* @dev: drm device
*
* Do some basic checking of regsiter state at error interrupt time and
* dump it to the syslog. Also call i915_capture_error_state() to make
* sure we get a record and make it available in debugfs. Fire a uevent
* so userspace knows something bad happened (should trigger collection
* of a ring dump etc.).
*/
void i915_handle_error(struct drm_device *dev, bool wedged,
const char *fmt, ...)
{
struct drm_i915_private *dev_priv = dev->dev_private;
va_list args;
char error_msg[80];
va_start(args, fmt);
vscnprintf(error_msg, sizeof(error_msg), fmt, args);
va_end(args);
i915_capture_error_state(dev, wedged, error_msg);
i915_report_and_clear_eir(dev);
if (wedged) {
atomic_set_mask(I915_RESET_IN_PROGRESS_FLAG,
&dev_priv->gpu_error.reset_counter);
/*
* Wakeup waiting processes so that the reset work function
* i915_error_work_func doesn't deadlock trying to grab various
* locks. By bumping the reset counter first, the woken
* processes will see a reset in progress and back off,
* releasing their locks and then wait for the reset completion.
* We must do this for _all_ gpu waiters that might hold locks
* that the reset work needs to acquire.
*
* Note: The wake_up serves as the required memory barrier to
* ensure that the waiters see the updated value of the reset
* counter atomic_t.
*/
i915_error_wake_up(dev_priv, false);
}
/*
* Our reset work can grab modeset locks (since it needs to reset the
* state of outstanding pagelips). Hence it must not be run on our own
* dev-priv->wq work queue for otherwise the flush_work in the pageflip
* code will deadlock.
*/
schedule_work(&dev_priv->gpu_error.work);
}
/* Called from drm generic code, passed 'crtc' which
* we use as a pipe index
*/
static int i915_enable_vblank(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long irqflags;
if (!i915_pipe_enabled(dev, pipe))
return -EINVAL;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (INTEL_INFO(dev)->gen >= 4)
i915_enable_pipestat(dev_priv, pipe,
PIPE_START_VBLANK_INTERRUPT_STATUS);
else
i915_enable_pipestat(dev_priv, pipe,
PIPE_VBLANK_INTERRUPT_STATUS);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
return 0;
}
static int ironlake_enable_vblank(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long irqflags;
uint32_t bit = (INTEL_INFO(dev)->gen >= 7) ? DE_PIPE_VBLANK_IVB(pipe) :
DE_PIPE_VBLANK(pipe);
if (!i915_pipe_enabled(dev, pipe))
return -EINVAL;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
ironlake_enable_display_irq(dev_priv, bit);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
return 0;
}
static int valleyview_enable_vblank(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long irqflags;
if (!i915_pipe_enabled(dev, pipe))
return -EINVAL;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
i915_enable_pipestat(dev_priv, pipe,
PIPE_START_VBLANK_INTERRUPT_STATUS);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
return 0;
}
static int gen8_enable_vblank(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long irqflags;
if (!i915_pipe_enabled(dev, pipe))
return -EINVAL;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
dev_priv->de_irq_mask[pipe] &= ~GEN8_PIPE_VBLANK;
I915_WRITE(GEN8_DE_PIPE_IMR(pipe), dev_priv->de_irq_mask[pipe]);
POSTING_READ(GEN8_DE_PIPE_IMR(pipe));
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
return 0;
}
/* Called from drm generic code, passed 'crtc' which
* we use as a pipe index
*/
static void i915_disable_vblank(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long irqflags;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
i915_disable_pipestat(dev_priv, pipe,
PIPE_VBLANK_INTERRUPT_STATUS |
PIPE_START_VBLANK_INTERRUPT_STATUS);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
static void ironlake_disable_vblank(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long irqflags;
uint32_t bit = (INTEL_INFO(dev)->gen >= 7) ? DE_PIPE_VBLANK_IVB(pipe) :
DE_PIPE_VBLANK(pipe);
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
ironlake_disable_display_irq(dev_priv, bit);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
static void valleyview_disable_vblank(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long irqflags;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
i915_disable_pipestat(dev_priv, pipe,
PIPE_START_VBLANK_INTERRUPT_STATUS);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
static void gen8_disable_vblank(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long irqflags;
if (!i915_pipe_enabled(dev, pipe))
return;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
dev_priv->de_irq_mask[pipe] |= GEN8_PIPE_VBLANK;
I915_WRITE(GEN8_DE_PIPE_IMR(pipe), dev_priv->de_irq_mask[pipe]);
POSTING_READ(GEN8_DE_PIPE_IMR(pipe));
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
static u32
ring_last_seqno(struct intel_engine_cs *ring)
{
return list_entry(ring->request_list.prev,
struct drm_i915_gem_request, list)->seqno;
}
static bool
ring_idle(struct intel_engine_cs *ring, u32 seqno)
{
return (list_empty(&ring->request_list) ||
i915_seqno_passed(seqno, ring_last_seqno(ring)));
}
static bool
ipehr_is_semaphore_wait(struct drm_device *dev, u32 ipehr)
{
if (INTEL_INFO(dev)->gen >= 8) {
return (ipehr >> 23) == 0x1c;
} else {
ipehr &= ~MI_SEMAPHORE_SYNC_MASK;
return ipehr == (MI_SEMAPHORE_MBOX | MI_SEMAPHORE_COMPARE |
MI_SEMAPHORE_REGISTER);
}
}
static struct intel_engine_cs *
semaphore_wait_to_signaller_ring(struct intel_engine_cs *ring, u32 ipehr, u64 offset)
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
struct intel_engine_cs *signaller;
int i;
if (INTEL_INFO(dev_priv->dev)->gen >= 8) {
for_each_ring(signaller, dev_priv, i) {
if (ring == signaller)
continue;
if (offset == signaller->semaphore.signal_ggtt[ring->id])
return signaller;
}
} else {
u32 sync_bits = ipehr & MI_SEMAPHORE_SYNC_MASK;
for_each_ring(signaller, dev_priv, i) {
if(ring == signaller)
continue;
if (sync_bits == signaller->semaphore.mbox.wait[ring->id])
return signaller;
}
}
DRM_ERROR("No signaller ring found for ring %i, ipehr 0x%08x, offset 0x%016llx\n",
ring->id, ipehr, offset);
return NULL;
}
static struct intel_engine_cs *
semaphore_waits_for(struct intel_engine_cs *ring, u32 *seqno)
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
u32 cmd, ipehr, head;
u64 offset = 0;
int i, backwards;
ipehr = I915_READ(RING_IPEHR(ring->mmio_base));
if (!ipehr_is_semaphore_wait(ring->dev, ipehr))
return NULL;
/*
* HEAD is likely pointing to the dword after the actual command,
* so scan backwards until we find the MBOX. But limit it to just 3
* or 4 dwords depending on the semaphore wait command size.
* Note that we don't care about ACTHD here since that might
* point at at batch, and semaphores are always emitted into the
* ringbuffer itself.
*/
head = I915_READ_HEAD(ring) & HEAD_ADDR;
backwards = (INTEL_INFO(ring->dev)->gen >= 8) ? 5 : 4;
for (i = backwards; i; --i) {
/*
* Be paranoid and presume the hw has gone off into the wild -
* our ring is smaller than what the hardware (and hence
* HEAD_ADDR) allows. Also handles wrap-around.
*/
head &= ring->buffer->size - 1;
/* This here seems to blow up */
cmd = ioread32(ring->buffer->virtual_start + head);
if (cmd == ipehr)
break;
head -= 4;
}
if (!i)
return NULL;
*seqno = ioread32(ring->buffer->virtual_start + head + 4) + 1;
if (INTEL_INFO(ring->dev)->gen >= 8) {
offset = ioread32(ring->buffer->virtual_start + head + 12);
offset <<= 32;
offset = ioread32(ring->buffer->virtual_start + head + 8);
}
return semaphore_wait_to_signaller_ring(ring, ipehr, offset);
}
static int semaphore_passed(struct intel_engine_cs *ring)
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
struct intel_engine_cs *signaller;
u32 seqno;
ring->hangcheck.deadlock++;
signaller = semaphore_waits_for(ring, &seqno);
if (signaller == NULL)
return -1;
/* Prevent pathological recursion due to driver bugs */
if (signaller->hangcheck.deadlock >= I915_NUM_RINGS)
return -1;
if (i915_seqno_passed(signaller->get_seqno(signaller, false), seqno))
return 1;
/* cursory check for an unkickable deadlock */
if (I915_READ_CTL(signaller) & RING_WAIT_SEMAPHORE &&
semaphore_passed(signaller) < 0)
return -1;
return 0;
}
static void semaphore_clear_deadlocks(struct drm_i915_private *dev_priv)
{
struct intel_engine_cs *ring;
int i;
for_each_ring(ring, dev_priv, i)
ring->hangcheck.deadlock = 0;
}
static enum intel_ring_hangcheck_action
ring_stuck(struct intel_engine_cs *ring, u64 acthd)
{
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 tmp;
if (acthd != ring->hangcheck.acthd) {
if (acthd > ring->hangcheck.max_acthd) {
ring->hangcheck.max_acthd = acthd;
return HANGCHECK_ACTIVE;
}
return HANGCHECK_ACTIVE_LOOP;
}
if (IS_GEN2(dev))
return HANGCHECK_HUNG;
/* Is the chip hanging on a WAIT_FOR_EVENT?
* If so we can simply poke the RB_WAIT bit
* and break the hang. This should work on
* all but the second generation chipsets.
*/
tmp = I915_READ_CTL(ring);
if (tmp & RING_WAIT) {
i915_handle_error(dev, false,
"Kicking stuck wait on %s",
ring->name);
I915_WRITE_CTL(ring, tmp);
return HANGCHECK_KICK;
}
if (INTEL_INFO(dev)->gen >= 6 && tmp & RING_WAIT_SEMAPHORE) {
switch (semaphore_passed(ring)) {
default:
return HANGCHECK_HUNG;
case 1:
i915_handle_error(dev, false,
"Kicking stuck semaphore on %s",
ring->name);
I915_WRITE_CTL(ring, tmp);
return HANGCHECK_KICK;
case 0:
return HANGCHECK_WAIT;
}
}
return HANGCHECK_HUNG;
}
/**
* This is called when the chip hasn't reported back with completed
* batchbuffers in a long time. We keep track per ring seqno progress and
* if there are no progress, hangcheck score for that ring is increased.
* Further, acthd is inspected to see if the ring is stuck. On stuck case
* we kick the ring. If we see no progress on three subsequent calls
* we assume chip is wedged and try to fix it by resetting the chip.
*/
static void i915_hangcheck_elapsed(unsigned long data)
{
struct drm_device *dev = (struct drm_device *)data;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_engine_cs *ring;
int i;
int busy_count = 0, rings_hung = 0;
bool stuck[I915_NUM_RINGS] = { 0 };
#define BUSY 1
#define KICK 5
#define HUNG 20
if (!i915.enable_hangcheck)
return;
for_each_ring(ring, dev_priv, i) {
u64 acthd;
u32 seqno;
bool busy = true;
semaphore_clear_deadlocks(dev_priv);
seqno = ring->get_seqno(ring, false);
acthd = intel_ring_get_active_head(ring);
if (ring->hangcheck.seqno == seqno) {
if (ring_idle(ring, seqno)) {
ring->hangcheck.action = HANGCHECK_IDLE;
if (waitqueue_active(&ring->irq_queue)) {
/* Issue a wake-up to catch stuck h/w. */
if (!test_and_set_bit(ring->id, &dev_priv->gpu_error.missed_irq_rings)) {
if (!(dev_priv->gpu_error.test_irq_rings & intel_ring_flag(ring)))
DRM_ERROR("Hangcheck timer elapsed... %s idle\n",
ring->name);
else
DRM_INFO("Fake missed irq on %s\n",
ring->name);
wake_up_all(&ring->irq_queue);
}
/* Safeguard against driver failure */
ring->hangcheck.score += BUSY;
} else
busy = false;
} else {
/* We always increment the hangcheck score
* if the ring is busy and still processing
* the same request, so that no single request
* can run indefinitely (such as a chain of
* batches). The only time we do not increment
* the hangcheck score on this ring, if this
* ring is in a legitimate wait for another
* ring. In that case the waiting ring is a
* victim and we want to be sure we catch the
* right culprit. Then every time we do kick
* the ring, add a small increment to the
* score so that we can catch a batch that is
* being repeatedly kicked and so responsible
* for stalling the machine.
*/
ring->hangcheck.action = ring_stuck(ring,
acthd);
switch (ring->hangcheck.action) {
case HANGCHECK_IDLE:
case HANGCHECK_WAIT:
case HANGCHECK_ACTIVE:
break;
case HANGCHECK_ACTIVE_LOOP:
ring->hangcheck.score += BUSY;
break;
case HANGCHECK_KICK:
ring->hangcheck.score += KICK;
break;
case HANGCHECK_HUNG:
ring->hangcheck.score += HUNG;
stuck[i] = true;
break;
}
}
} else {
ring->hangcheck.action = HANGCHECK_ACTIVE;
/* Gradually reduce the count so that we catch DoS
* attempts across multiple batches.
*/
if (ring->hangcheck.score > 0)
ring->hangcheck.score--;
ring->hangcheck.acthd = ring->hangcheck.max_acthd = 0;
}
ring->hangcheck.seqno = seqno;
ring->hangcheck.acthd = acthd;
busy_count += busy;
}
for_each_ring(ring, dev_priv, i) {
if (ring->hangcheck.score >= HANGCHECK_SCORE_RING_HUNG) {
DRM_INFO("%s on %s\n",
stuck[i] ? "stuck" : "no progress",
ring->name);
rings_hung++;
}
}
if (rings_hung)
return i915_handle_error(dev, true, "Ring hung");
if (busy_count)
/* Reset timer case chip hangs without another request
* being added */
i915_queue_hangcheck(dev);
}
void i915_queue_hangcheck(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (!i915.enable_hangcheck)
return;
mod_timer(&dev_priv->gpu_error.hangcheck_timer,
round_jiffies_up(jiffies + DRM_I915_HANGCHECK_JIFFIES));
}
static void ibx_irq_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (HAS_PCH_NOP(dev))
return;
GEN5_IRQ_RESET(SDE);
if (HAS_PCH_CPT(dev) || HAS_PCH_LPT(dev))
I915_WRITE(SERR_INT, 0xffffffff);
}
/*
* SDEIER is also touched by the interrupt handler to work around missed PCH
* interrupts. Hence we can't update it after the interrupt handler is enabled -
* instead we unconditionally enable all PCH interrupt sources here, but then
* only unmask them as needed with SDEIMR.
*
* This function needs to be called before interrupts are enabled.
*/
static void ibx_irq_pre_postinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (HAS_PCH_NOP(dev))
return;
WARN_ON(I915_READ(SDEIER) != 0);
I915_WRITE(SDEIER, 0xffffffff);
POSTING_READ(SDEIER);
}
static void gen5_gt_irq_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
GEN5_IRQ_RESET(GT);
if (INTEL_INFO(dev)->gen >= 6)
GEN5_IRQ_RESET(GEN6_PM);
}
/* drm_dma.h hooks
*/
static void ironlake_irq_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(HWSTAM, 0xffffffff);
GEN5_IRQ_RESET(DE);
if (IS_GEN7(dev))
I915_WRITE(GEN7_ERR_INT, 0xffffffff);
gen5_gt_irq_reset(dev);
ibx_irq_reset(dev);
}
static void valleyview_irq_preinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
/* VLV magic */
I915_WRITE(VLV_IMR, 0);
I915_WRITE(RING_IMR(RENDER_RING_BASE), 0);
I915_WRITE(RING_IMR(GEN6_BSD_RING_BASE), 0);
I915_WRITE(RING_IMR(BLT_RING_BASE), 0);
/* and GT */
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIIR, I915_READ(GTIIR));
gen5_gt_irq_reset(dev);
I915_WRITE(DPINVGTT, 0xff);
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
for_each_pipe(dev_priv, pipe)
I915_WRITE(PIPESTAT(pipe), 0xffff);
I915_WRITE(VLV_IIR, 0xffffffff);
I915_WRITE(VLV_IMR, 0xffffffff);
I915_WRITE(VLV_IER, 0x0);
POSTING_READ(VLV_IER);
}
static void gen8_gt_irq_reset(struct drm_i915_private *dev_priv)
{
GEN8_IRQ_RESET_NDX(GT, 0);
GEN8_IRQ_RESET_NDX(GT, 1);
GEN8_IRQ_RESET_NDX(GT, 2);
GEN8_IRQ_RESET_NDX(GT, 3);
}
static void gen8_irq_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
I915_WRITE(GEN8_MASTER_IRQ, 0);
POSTING_READ(GEN8_MASTER_IRQ);
gen8_gt_irq_reset(dev_priv);
for_each_pipe(dev_priv, pipe)
if (intel_display_power_enabled(dev_priv,
POWER_DOMAIN_PIPE(pipe)))
GEN8_IRQ_RESET_NDX(DE_PIPE, pipe);
GEN5_IRQ_RESET(GEN8_DE_PORT_);
GEN5_IRQ_RESET(GEN8_DE_MISC_);
GEN5_IRQ_RESET(GEN8_PCU_);
ibx_irq_reset(dev);
}
void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv)
{
spin_lock_irq(&dev_priv->irq_lock);
GEN8_IRQ_INIT_NDX(DE_PIPE, PIPE_B, dev_priv->de_irq_mask[PIPE_B],
~dev_priv->de_irq_mask[PIPE_B]);
GEN8_IRQ_INIT_NDX(DE_PIPE, PIPE_C, dev_priv->de_irq_mask[PIPE_C],
~dev_priv->de_irq_mask[PIPE_C]);
spin_unlock_irq(&dev_priv->irq_lock);
}
static void cherryview_irq_preinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
I915_WRITE(GEN8_MASTER_IRQ, 0);
POSTING_READ(GEN8_MASTER_IRQ);
gen8_gt_irq_reset(dev_priv);
GEN5_IRQ_RESET(GEN8_PCU_);
POSTING_READ(GEN8_PCU_IIR);
I915_WRITE(DPINVGTT, DPINVGTT_STATUS_MASK_CHV);
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
for_each_pipe(dev_priv, pipe)
I915_WRITE(PIPESTAT(pipe), 0xffff);
I915_WRITE(VLV_IMR, 0xffffffff);
I915_WRITE(VLV_IER, 0x0);
I915_WRITE(VLV_IIR, 0xffffffff);
POSTING_READ(VLV_IIR);
}
static void ibx_hpd_irq_setup(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *intel_encoder;
u32 hotplug_irqs, hotplug, enabled_irqs = 0;
if (HAS_PCH_IBX(dev)) {
hotplug_irqs = SDE_HOTPLUG_MASK;
for_each_intel_encoder(dev, intel_encoder)
if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED)
enabled_irqs |= hpd_ibx[intel_encoder->hpd_pin];
} else {
hotplug_irqs = SDE_HOTPLUG_MASK_CPT;
for_each_intel_encoder(dev, intel_encoder)
if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED)
enabled_irqs |= hpd_cpt[intel_encoder->hpd_pin];
}
ibx_display_interrupt_update(dev_priv, hotplug_irqs, enabled_irqs);
/*
* Enable digital hotplug on the PCH, and configure the DP short pulse
* duration to 2ms (which is the minimum in the Display Port spec)
*
* This register is the same on all known PCH chips.
*/
hotplug = I915_READ(PCH_PORT_HOTPLUG);
hotplug &= ~(PORTD_PULSE_DURATION_MASK|PORTC_PULSE_DURATION_MASK|PORTB_PULSE_DURATION_MASK);
hotplug |= PORTD_HOTPLUG_ENABLE | PORTD_PULSE_DURATION_2ms;
hotplug |= PORTC_HOTPLUG_ENABLE | PORTC_PULSE_DURATION_2ms;
hotplug |= PORTB_HOTPLUG_ENABLE | PORTB_PULSE_DURATION_2ms;
I915_WRITE(PCH_PORT_HOTPLUG, hotplug);
}
static void ibx_irq_postinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 mask;
if (HAS_PCH_NOP(dev))
return;
if (HAS_PCH_IBX(dev))
mask = SDE_GMBUS | SDE_AUX_MASK | SDE_POISON;
else
mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT;
GEN5_ASSERT_IIR_IS_ZERO(SDEIIR);
I915_WRITE(SDEIMR, ~mask);
}
static void gen5_gt_irq_postinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pm_irqs, gt_irqs;
pm_irqs = gt_irqs = 0;
dev_priv->gt_irq_mask = ~0;
if (HAS_L3_DPF(dev)) {
/* L3 parity interrupt is always unmasked. */
dev_priv->gt_irq_mask = ~GT_PARITY_ERROR(dev);
gt_irqs |= GT_PARITY_ERROR(dev);
}
gt_irqs |= GT_RENDER_USER_INTERRUPT;
if (IS_GEN5(dev)) {
gt_irqs |= GT_RENDER_PIPECTL_NOTIFY_INTERRUPT |
ILK_BSD_USER_INTERRUPT;
} else {
gt_irqs |= GT_BLT_USER_INTERRUPT | GT_BSD_USER_INTERRUPT;
}
GEN5_IRQ_INIT(GT, dev_priv->gt_irq_mask, gt_irqs);
if (INTEL_INFO(dev)->gen >= 6) {
pm_irqs |= dev_priv->pm_rps_events;
if (HAS_VEBOX(dev))
pm_irqs |= PM_VEBOX_USER_INTERRUPT;
dev_priv->pm_irq_mask = 0xffffffff;
GEN5_IRQ_INIT(GEN6_PM, dev_priv->pm_irq_mask, pm_irqs);
}
}
static int ironlake_irq_postinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 display_mask, extra_mask;
if (INTEL_INFO(dev)->gen >= 7) {
display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE_IVB |
DE_PCH_EVENT_IVB | DE_PLANEC_FLIP_DONE_IVB |
DE_PLANEB_FLIP_DONE_IVB |
DE_PLANEA_FLIP_DONE_IVB | DE_AUX_CHANNEL_A_IVB);
extra_mask = (DE_PIPEC_VBLANK_IVB | DE_PIPEB_VBLANK_IVB |
DE_PIPEA_VBLANK_IVB | DE_ERR_INT_IVB);
} else {
display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE |
DE_AUX_CHANNEL_A |
DE_PIPEB_CRC_DONE | DE_PIPEA_CRC_DONE |
DE_POISON);
extra_mask = DE_PIPEA_VBLANK | DE_PIPEB_VBLANK | DE_PCU_EVENT |
DE_PIPEB_FIFO_UNDERRUN | DE_PIPEA_FIFO_UNDERRUN;
}
dev_priv->irq_mask = ~display_mask;
I915_WRITE(HWSTAM, 0xeffe);
ibx_irq_pre_postinstall(dev);
GEN5_IRQ_INIT(DE, dev_priv->irq_mask, display_mask | extra_mask);
gen5_gt_irq_postinstall(dev);
ibx_irq_postinstall(dev);
if (IS_IRONLAKE_M(dev)) {
/* Enable PCU event interrupts
*
* spinlocking not required here for correctness since interrupt
* setup is guaranteed to run in single-threaded context. But we
* need it to make the assert_spin_locked happy. */
spin_lock_irq(&dev_priv->irq_lock);
ironlake_enable_display_irq(dev_priv, DE_PCU_EVENT);
spin_unlock_irq(&dev_priv->irq_lock);
}
return 0;
}
static void valleyview_display_irqs_install(struct drm_i915_private *dev_priv)
{
u32 pipestat_mask;
u32 iir_mask;
pipestat_mask = PIPESTAT_INT_STATUS_MASK |
PIPE_FIFO_UNDERRUN_STATUS;
I915_WRITE(PIPESTAT(PIPE_A), pipestat_mask);
I915_WRITE(PIPESTAT(PIPE_B), pipestat_mask);
POSTING_READ(PIPESTAT(PIPE_A));
pipestat_mask = PLANE_FLIP_DONE_INT_STATUS_VLV |
PIPE_CRC_DONE_INTERRUPT_STATUS;
i915_enable_pipestat(dev_priv, PIPE_A, pipestat_mask |
PIPE_GMBUS_INTERRUPT_STATUS);
i915_enable_pipestat(dev_priv, PIPE_B, pipestat_mask);
iir_mask = I915_DISPLAY_PORT_INTERRUPT |
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
dev_priv->irq_mask &= ~iir_mask;
I915_WRITE(VLV_IIR, iir_mask);
I915_WRITE(VLV_IIR, iir_mask);
I915_WRITE(VLV_IMR, dev_priv->irq_mask);
I915_WRITE(VLV_IER, ~dev_priv->irq_mask);
POSTING_READ(VLV_IER);
}
static void valleyview_display_irqs_uninstall(struct drm_i915_private *dev_priv)
{
u32 pipestat_mask;
u32 iir_mask;
iir_mask = I915_DISPLAY_PORT_INTERRUPT |
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
dev_priv->irq_mask |= iir_mask;
I915_WRITE(VLV_IER, ~dev_priv->irq_mask);
I915_WRITE(VLV_IMR, dev_priv->irq_mask);
I915_WRITE(VLV_IIR, iir_mask);
I915_WRITE(VLV_IIR, iir_mask);
POSTING_READ(VLV_IIR);
pipestat_mask = PLANE_FLIP_DONE_INT_STATUS_VLV |
PIPE_CRC_DONE_INTERRUPT_STATUS;
i915_disable_pipestat(dev_priv, PIPE_A, pipestat_mask |
PIPE_GMBUS_INTERRUPT_STATUS);
i915_disable_pipestat(dev_priv, PIPE_B, pipestat_mask);
pipestat_mask = PIPESTAT_INT_STATUS_MASK |
PIPE_FIFO_UNDERRUN_STATUS;
I915_WRITE(PIPESTAT(PIPE_A), pipestat_mask);
I915_WRITE(PIPESTAT(PIPE_B), pipestat_mask);
POSTING_READ(PIPESTAT(PIPE_A));
}
void valleyview_enable_display_irqs(struct drm_i915_private *dev_priv)
{
assert_spin_locked(&dev_priv->irq_lock);
if (dev_priv->display_irqs_enabled)
return;
dev_priv->display_irqs_enabled = true;
if (intel_irqs_enabled(dev_priv))
valleyview_display_irqs_install(dev_priv);
}
void valleyview_disable_display_irqs(struct drm_i915_private *dev_priv)
{
assert_spin_locked(&dev_priv->irq_lock);
if (!dev_priv->display_irqs_enabled)
return;
dev_priv->display_irqs_enabled = false;
if (intel_irqs_enabled(dev_priv))
valleyview_display_irqs_uninstall(dev_priv);
}
static int valleyview_irq_postinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->irq_mask = ~0;
I915_WRITE(PORT_HOTPLUG_EN, 0);
POSTING_READ(PORT_HOTPLUG_EN);
I915_WRITE(VLV_IMR, dev_priv->irq_mask);
I915_WRITE(VLV_IER, ~dev_priv->irq_mask);
I915_WRITE(VLV_IIR, 0xffffffff);
POSTING_READ(VLV_IER);
/* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked check happy. */
spin_lock_irq(&dev_priv->irq_lock);
if (dev_priv->display_irqs_enabled)
valleyview_display_irqs_install(dev_priv);
spin_unlock_irq(&dev_priv->irq_lock);
I915_WRITE(VLV_IIR, 0xffffffff);
I915_WRITE(VLV_IIR, 0xffffffff);
gen5_gt_irq_postinstall(dev);
/* ack & enable invalid PTE error interrupts */
#if 0 /* FIXME: add support to irq handler for checking these bits */
I915_WRITE(DPINVGTT, DPINVGTT_STATUS_MASK);
I915_WRITE(DPINVGTT, DPINVGTT_EN_MASK);
#endif
I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE);
return 0;
}
static void gen8_gt_irq_postinstall(struct drm_i915_private *dev_priv)
{
/* These are interrupts we'll toggle with the ring mask register */
uint32_t gt_interrupts[] = {
GT_RENDER_USER_INTERRUPT << GEN8_RCS_IRQ_SHIFT |
GT_CONTEXT_SWITCH_INTERRUPT << GEN8_RCS_IRQ_SHIFT |
GT_RENDER_L3_PARITY_ERROR_INTERRUPT |
GT_RENDER_USER_INTERRUPT << GEN8_BCS_IRQ_SHIFT |
GT_CONTEXT_SWITCH_INTERRUPT << GEN8_BCS_IRQ_SHIFT,
GT_RENDER_USER_INTERRUPT << GEN8_VCS1_IRQ_SHIFT |
GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VCS1_IRQ_SHIFT |
GT_RENDER_USER_INTERRUPT << GEN8_VCS2_IRQ_SHIFT |
GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VCS2_IRQ_SHIFT,
0,
GT_RENDER_USER_INTERRUPT << GEN8_VECS_IRQ_SHIFT |
GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VECS_IRQ_SHIFT
};
dev_priv->pm_irq_mask = 0xffffffff;
GEN8_IRQ_INIT_NDX(GT, 0, ~gt_interrupts[0], gt_interrupts[0]);
GEN8_IRQ_INIT_NDX(GT, 1, ~gt_interrupts[1], gt_interrupts[1]);
GEN8_IRQ_INIT_NDX(GT, 2, dev_priv->pm_irq_mask, dev_priv->pm_rps_events);
GEN8_IRQ_INIT_NDX(GT, 3, ~gt_interrupts[3], gt_interrupts[3]);
}
static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
{
uint32_t de_pipe_masked = GEN8_PIPE_CDCLK_CRC_DONE;
uint32_t de_pipe_enables;
int pipe;
if (IS_GEN9(dev_priv))
de_pipe_masked |= GEN9_PIPE_PLANE1_FLIP_DONE |
GEN9_DE_PIPE_IRQ_FAULT_ERRORS;
else
de_pipe_masked |= GEN8_PIPE_PRIMARY_FLIP_DONE |
GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
GEN8_PIPE_FIFO_UNDERRUN;
dev_priv->de_irq_mask[PIPE_A] = ~de_pipe_masked;
dev_priv->de_irq_mask[PIPE_B] = ~de_pipe_masked;
dev_priv->de_irq_mask[PIPE_C] = ~de_pipe_masked;
for_each_pipe(dev_priv, pipe)
if (intel_display_power_enabled(dev_priv,
POWER_DOMAIN_PIPE(pipe)))
GEN8_IRQ_INIT_NDX(DE_PIPE, pipe,
dev_priv->de_irq_mask[pipe],
de_pipe_enables);
GEN5_IRQ_INIT(GEN8_DE_PORT_, ~GEN8_AUX_CHANNEL_A, GEN8_AUX_CHANNEL_A);
}
static int gen8_irq_postinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
ibx_irq_pre_postinstall(dev);
gen8_gt_irq_postinstall(dev_priv);
gen8_de_irq_postinstall(dev_priv);
ibx_irq_postinstall(dev);
I915_WRITE(GEN8_MASTER_IRQ, DE_MASTER_IRQ_CONTROL);
POSTING_READ(GEN8_MASTER_IRQ);
return 0;
}
static int cherryview_irq_postinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 enable_mask = I915_DISPLAY_PORT_INTERRUPT |
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_C_EVENT_INTERRUPT;
u32 pipestat_enable = PLANE_FLIP_DONE_INT_STATUS_VLV |
PIPE_CRC_DONE_INTERRUPT_STATUS;
int pipe;
/*
* Leave vblank interrupts masked initially. enable/disable will
* toggle them based on usage.
*/
dev_priv->irq_mask = ~enable_mask;
for_each_pipe(dev_priv, pipe)
I915_WRITE(PIPESTAT(pipe), 0xffff);
spin_lock_irq(&dev_priv->irq_lock);
i915_enable_pipestat(dev_priv, PIPE_A, PIPE_GMBUS_INTERRUPT_STATUS);
for_each_pipe(dev_priv, pipe)
i915_enable_pipestat(dev_priv, pipe, pipestat_enable);
spin_unlock_irq(&dev_priv->irq_lock);
I915_WRITE(VLV_IIR, 0xffffffff);
I915_WRITE(VLV_IMR, dev_priv->irq_mask);
I915_WRITE(VLV_IER, enable_mask);
gen8_gt_irq_postinstall(dev_priv);
I915_WRITE(GEN8_MASTER_IRQ, MASTER_INTERRUPT_ENABLE);
POSTING_READ(GEN8_MASTER_IRQ);
return 0;
}
static void gen8_irq_uninstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (!dev_priv)
return;
gen8_irq_reset(dev);
}
static void valleyview_irq_uninstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
if (!dev_priv)
return;
I915_WRITE(VLV_MASTER_IER, 0);
for_each_pipe(dev_priv, pipe)
I915_WRITE(PIPESTAT(pipe), 0xffff);
I915_WRITE(HWSTAM, 0xffffffff);
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
/* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked check happy. */
spin_lock_irq(&dev_priv->irq_lock);
if (dev_priv->display_irqs_enabled)
valleyview_display_irqs_uninstall(dev_priv);
spin_unlock_irq(&dev_priv->irq_lock);
dev_priv->irq_mask = 0;
I915_WRITE(VLV_IIR, 0xffffffff);
I915_WRITE(VLV_IMR, 0xffffffff);
I915_WRITE(VLV_IER, 0x0);
POSTING_READ(VLV_IER);
}
static void cherryview_irq_uninstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
if (!dev_priv)
return;
I915_WRITE(GEN8_MASTER_IRQ, 0);
POSTING_READ(GEN8_MASTER_IRQ);
#define GEN8_IRQ_FINI_NDX(type, which) \
do { \
I915_WRITE(GEN8_##type##_IMR(which), 0xffffffff); \
I915_WRITE(GEN8_##type##_IER(which), 0); \
I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \
POSTING_READ(GEN8_##type##_IIR(which)); \
I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \
} while (0)
#define GEN8_IRQ_FINI(type) \
do { \
I915_WRITE(GEN8_##type##_IMR, 0xffffffff); \
I915_WRITE(GEN8_##type##_IER, 0); \
I915_WRITE(GEN8_##type##_IIR, 0xffffffff); \
POSTING_READ(GEN8_##type##_IIR); \
I915_WRITE(GEN8_##type##_IIR, 0xffffffff); \
} while (0)
GEN8_IRQ_FINI_NDX(GT, 0);
GEN8_IRQ_FINI_NDX(GT, 1);
GEN8_IRQ_FINI_NDX(GT, 2);
GEN8_IRQ_FINI_NDX(GT, 3);
GEN8_IRQ_FINI(PCU);
#undef GEN8_IRQ_FINI
#undef GEN8_IRQ_FINI_NDX
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
for_each_pipe(dev_priv, pipe)
I915_WRITE(PIPESTAT(pipe), 0xffff);
I915_WRITE(VLV_IMR, 0xffffffff);
I915_WRITE(VLV_IER, 0x0);
I915_WRITE(VLV_IIR, 0xffffffff);
POSTING_READ(VLV_IIR);
}
static void ironlake_irq_uninstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (!dev_priv)
return;
ironlake_irq_reset(dev);
}
static void i8xx_irq_preinstall(struct drm_device * dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
for_each_pipe(dev_priv, pipe)
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE16(IMR, 0xffff);
I915_WRITE16(IER, 0x0);
POSTING_READ16(IER);
}
static int i8xx_irq_postinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE16(EMR,
~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
/* Unmask the interrupts that we always want on. */
dev_priv->irq_mask =
~(I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
I915_WRITE16(IMR, dev_priv->irq_mask);
I915_WRITE16(IER,
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT |
I915_USER_INTERRUPT);
POSTING_READ16(IER);
/* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked check happy. */
spin_lock_irq(&dev_priv->irq_lock);
i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS);
i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS);
spin_unlock_irq(&dev_priv->irq_lock);
return 0;
}
/*
* Returns true when a page flip has completed.
*/
static bool i8xx_handle_vblank(struct drm_device *dev,
int plane, int pipe, u32 iir)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u16 flip_pending = DISPLAY_PLANE_FLIP_PENDING(plane);
if (!intel_pipe_handle_vblank(dev, pipe))
return false;
if ((iir & flip_pending) == 0)
goto check_page_flip;
intel_prepare_page_flip(dev, plane);
/* We detect FlipDone by looking for the change in PendingFlip from '1'
* to '0' on the following vblank, i.e. IIR has the Pendingflip
* asserted following the MI_DISPLAY_FLIP, but ISR is deasserted, hence
* the flip is completed (no longer pending). Since this doesn't raise
* an interrupt per se, we watch for the change at vblank.
*/
if (I915_READ16(ISR) & flip_pending)
goto check_page_flip;
intel_finish_page_flip(dev, pipe);
return true;
check_page_flip:
intel_check_page_flip(dev, pipe);
return false;
}
static irqreturn_t i8xx_irq_handler(int irq, void *arg)
{
struct drm_device *dev = arg;
struct drm_i915_private *dev_priv = dev->dev_private;
u16 iir, new_iir;
u32 pipe_stats[2];
int pipe;
u16 flip_mask =
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
iir = I915_READ16(IIR);
if (iir == 0)
return IRQ_NONE;
while (iir & ~flip_mask) {
/* Can't rely on pipestat interrupt bit in iir as it might
* have been cleared after the pipestat interrupt was received.
* It doesn't set the bit in iir again, but it still produces
* interrupts (for non-MSI).
*/
spin_lock(&dev_priv->irq_lock);
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
i915_handle_error(dev, false,
"Command parser error, iir 0x%08x",
iir);
for_each_pipe(dev_priv, pipe) {
int reg = PIPESTAT(pipe);
pipe_stats[pipe] = I915_READ(reg);
/*
* Clear the PIPE*STAT regs before the IIR
*/
if (pipe_stats[pipe] & 0x8000ffff)
I915_WRITE(reg, pipe_stats[pipe]);
}
spin_unlock(&dev_priv->irq_lock);
I915_WRITE16(IIR, iir & ~flip_mask);
new_iir = I915_READ16(IIR); /* Flush posted writes */
i915_update_dri1_breadcrumb(dev);
if (iir & I915_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[RCS]);
for_each_pipe(dev_priv, pipe) {
int plane = pipe;
if (HAS_FBC(dev))
plane = !plane;
if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS &&
i8xx_handle_vblank(dev, plane, pipe, iir))
flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(plane);
if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS)
i9xx_pipe_crc_irq_handler(dev, pipe);
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS &&
intel_set_cpu_fifo_underrun_reporting(dev, pipe, false))
DRM_ERROR("pipe %c underrun\n", pipe_name(pipe));
}
iir = new_iir;
}
return IRQ_HANDLED;
}
static void i8xx_irq_uninstall(struct drm_device * dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
for_each_pipe(dev_priv, pipe) {
/* Clear enable bits; then clear status bits */
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(PIPESTAT(pipe), I915_READ(PIPESTAT(pipe)));
}
I915_WRITE16(IMR, 0xffff);
I915_WRITE16(IER, 0x0);
I915_WRITE16(IIR, I915_READ16(IIR));
}
static void i915_irq_preinstall(struct drm_device * dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
if (I915_HAS_HOTPLUG(dev)) {
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
}
I915_WRITE16(HWSTAM, 0xeffe);
for_each_pipe(dev_priv, pipe)
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
POSTING_READ(IER);
}
static int i915_irq_postinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 enable_mask;
I915_WRITE(EMR, ~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
/* Unmask the interrupts that we always want on. */
dev_priv->irq_mask =
~(I915_ASLE_INTERRUPT |
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
enable_mask =
I915_ASLE_INTERRUPT |
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT |
I915_USER_INTERRUPT;
if (I915_HAS_HOTPLUG(dev)) {
I915_WRITE(PORT_HOTPLUG_EN, 0);
POSTING_READ(PORT_HOTPLUG_EN);
/* Enable in IER... */
enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
/* and unmask in IMR */
dev_priv->irq_mask &= ~I915_DISPLAY_PORT_INTERRUPT;
}
I915_WRITE(IMR, dev_priv->irq_mask);
I915_WRITE(IER, enable_mask);
POSTING_READ(IER);
i915_enable_asle_pipestat(dev);
/* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked check happy. */
spin_lock_irq(&dev_priv->irq_lock);
i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS);
i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS);
spin_unlock_irq(&dev_priv->irq_lock);
return 0;
}
/*
* Returns true when a page flip has completed.
*/
static bool i915_handle_vblank(struct drm_device *dev,
int plane, int pipe, u32 iir)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 flip_pending = DISPLAY_PLANE_FLIP_PENDING(plane);
if (!intel_pipe_handle_vblank(dev, pipe))
return false;
if ((iir & flip_pending) == 0)
goto check_page_flip;
intel_prepare_page_flip(dev, plane);
/* We detect FlipDone by looking for the change in PendingFlip from '1'
* to '0' on the following vblank, i.e. IIR has the Pendingflip
* asserted following the MI_DISPLAY_FLIP, but ISR is deasserted, hence
* the flip is completed (no longer pending). Since this doesn't raise
* an interrupt per se, we watch for the change at vblank.
*/
if (I915_READ(ISR) & flip_pending)
goto check_page_flip;
intel_finish_page_flip(dev, pipe);
return true;
check_page_flip:
intel_check_page_flip(dev, pipe);
return false;
}
static irqreturn_t i915_irq_handler(int irq, void *arg)
{
struct drm_device *dev = arg;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 iir, new_iir, pipe_stats[I915_MAX_PIPES];
u32 flip_mask =
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
int pipe, ret = IRQ_NONE;
iir = I915_READ(IIR);
do {
bool irq_received = (iir & ~flip_mask) != 0;
bool blc_event = false;
/* Can't rely on pipestat interrupt bit in iir as it might
* have been cleared after the pipestat interrupt was received.
* It doesn't set the bit in iir again, but it still produces
* interrupts (for non-MSI).
*/
spin_lock(&dev_priv->irq_lock);
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
i915_handle_error(dev, false,
"Command parser error, iir 0x%08x",
iir);
for_each_pipe(dev_priv, pipe) {
int reg = PIPESTAT(pipe);
pipe_stats[pipe] = I915_READ(reg);
/* Clear the PIPE*STAT regs before the IIR */
if (pipe_stats[pipe] & 0x8000ffff) {
I915_WRITE(reg, pipe_stats[pipe]);
irq_received = true;
}
}
spin_unlock(&dev_priv->irq_lock);
if (!irq_received)
break;
/* Consume port. Then clear IIR or we'll miss events */
if (I915_HAS_HOTPLUG(dev) &&
iir & I915_DISPLAY_PORT_INTERRUPT)
i9xx_hpd_irq_handler(dev);
I915_WRITE(IIR, iir & ~flip_mask);
new_iir = I915_READ(IIR); /* Flush posted writes */
if (iir & I915_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[RCS]);
for_each_pipe(dev_priv, pipe) {
int plane = pipe;
if (HAS_FBC(dev))
plane = !plane;
if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS &&
i915_handle_vblank(dev, plane, pipe, iir))
flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(plane);
if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS)
blc_event = true;
if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS)
i9xx_pipe_crc_irq_handler(dev, pipe);
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS &&
intel_set_cpu_fifo_underrun_reporting(dev, pipe, false))
DRM_ERROR("pipe %c underrun\n", pipe_name(pipe));
}
if (blc_event || (iir & I915_ASLE_INTERRUPT))
intel_opregion_asle_intr(dev);
/* With MSI, interrupts are only generated when iir
* transitions from zero to nonzero. If another bit got
* set while we were handling the existing iir bits, then
* we would never get another interrupt.
*
* This is fine on non-MSI as well, as if we hit this path
* we avoid exiting the interrupt handler only to generate
* another one.
*
* Note that for MSI this could cause a stray interrupt report
* if an interrupt landed in the time between writing IIR and
* the posting read. This should be rare enough to never
* trigger the 99% of 100,000 interrupts test for disabling
* stray interrupts.
*/
ret = IRQ_HANDLED;
iir = new_iir;
} while (iir & ~flip_mask);
i915_update_dri1_breadcrumb(dev);
return ret;
}
static void i915_irq_uninstall(struct drm_device * dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
if (I915_HAS_HOTPLUG(dev)) {
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
}
I915_WRITE16(HWSTAM, 0xffff);
for_each_pipe(dev_priv, pipe) {
/* Clear enable bits; then clear status bits */
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(PIPESTAT(pipe), I915_READ(PIPESTAT(pipe)));
}
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
I915_WRITE(IIR, I915_READ(IIR));
}
static void i965_irq_preinstall(struct drm_device * dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
I915_WRITE(HWSTAM, 0xeffe);
for_each_pipe(dev_priv, pipe)
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
POSTING_READ(IER);
}
static int i965_irq_postinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 enable_mask;
u32 error_mask;
/* Unmask the interrupts that we always want on. */
dev_priv->irq_mask = ~(I915_ASLE_INTERRUPT |
I915_DISPLAY_PORT_INTERRUPT |
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
enable_mask = ~dev_priv->irq_mask;
enable_mask &= ~(I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT);
enable_mask |= I915_USER_INTERRUPT;
if (IS_G4X(dev))
enable_mask |= I915_BSD_USER_INTERRUPT;
/* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked check happy. */
spin_lock_irq(&dev_priv->irq_lock);
i915_enable_pipestat(dev_priv, PIPE_A, PIPE_GMBUS_INTERRUPT_STATUS);
i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS);
i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS);
spin_unlock_irq(&dev_priv->irq_lock);
/*
* Enable some error detection, note the instruction error mask
* bit is reserved, so we leave it masked.
*/
if (IS_G4X(dev)) {
error_mask = ~(GM45_ERROR_PAGE_TABLE |
GM45_ERROR_MEM_PRIV |
GM45_ERROR_CP_PRIV |
I915_ERROR_MEMORY_REFRESH);
} else {
error_mask = ~(I915_ERROR_PAGE_TABLE |
I915_ERROR_MEMORY_REFRESH);
}
I915_WRITE(EMR, error_mask);
I915_WRITE(IMR, dev_priv->irq_mask);
I915_WRITE(IER, enable_mask);
POSTING_READ(IER);
I915_WRITE(PORT_HOTPLUG_EN, 0);
POSTING_READ(PORT_HOTPLUG_EN);
i915_enable_asle_pipestat(dev);
return 0;
}
static void i915_hpd_irq_setup(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *intel_encoder;
u32 hotplug_en;
assert_spin_locked(&dev_priv->irq_lock);
if (I915_HAS_HOTPLUG(dev)) {
hotplug_en = I915_READ(PORT_HOTPLUG_EN);
hotplug_en &= ~HOTPLUG_INT_EN_MASK;
/* Note HDMI and DP share hotplug bits */
/* enable bits are the same for all generations */
for_each_intel_encoder(dev, intel_encoder)
if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED)
hotplug_en |= hpd_mask_i915[intel_encoder->hpd_pin];
/* Programming the CRT detection parameters tends
to generate a spurious hotplug event about three
seconds later. So just do it once.
*/
if (IS_G4X(dev))
hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
hotplug_en &= ~CRT_HOTPLUG_VOLTAGE_COMPARE_MASK;
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
/* Ignore TV since it's buggy */
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
}
}
static irqreturn_t i965_irq_handler(int irq, void *arg)
{
struct drm_device *dev = arg;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 iir, new_iir;
u32 pipe_stats[I915_MAX_PIPES];
int ret = IRQ_NONE, pipe;
u32 flip_mask =
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
iir = I915_READ(IIR);
for (;;) {
bool irq_received = (iir & ~flip_mask) != 0;
bool blc_event = false;
/* Can't rely on pipestat interrupt bit in iir as it might
* have been cleared after the pipestat interrupt was received.
* It doesn't set the bit in iir again, but it still produces
* interrupts (for non-MSI).
*/
spin_lock(&dev_priv->irq_lock);
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
i915_handle_error(dev, false,
"Command parser error, iir 0x%08x",
iir);
for_each_pipe(dev_priv, pipe) {
int reg = PIPESTAT(pipe);
pipe_stats[pipe] = I915_READ(reg);
/*
* Clear the PIPE*STAT regs before the IIR
*/
if (pipe_stats[pipe] & 0x8000ffff) {
I915_WRITE(reg, pipe_stats[pipe]);
irq_received = true;
}
}
spin_unlock(&dev_priv->irq_lock);
if (!irq_received)
break;
ret = IRQ_HANDLED;
/* Consume port. Then clear IIR or we'll miss events */
if (iir & I915_DISPLAY_PORT_INTERRUPT)
i9xx_hpd_irq_handler(dev);
I915_WRITE(IIR, iir & ~flip_mask);
new_iir = I915_READ(IIR); /* Flush posted writes */
if (iir & I915_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[RCS]);
if (iir & I915_BSD_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[VCS]);
for_each_pipe(dev_priv, pipe) {
if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS &&
i915_handle_vblank(dev, pipe, pipe, iir))
flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(pipe);
if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS)
blc_event = true;
if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS)
i9xx_pipe_crc_irq_handler(dev, pipe);
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS &&
intel_set_cpu_fifo_underrun_reporting(dev, pipe, false))
DRM_ERROR("pipe %c underrun\n", pipe_name(pipe));
}
if (blc_event || (iir & I915_ASLE_INTERRUPT))
intel_opregion_asle_intr(dev);
if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS)
gmbus_irq_handler(dev);
/* With MSI, interrupts are only generated when iir
* transitions from zero to nonzero. If another bit got
* set while we were handling the existing iir bits, then
* we would never get another interrupt.
*
* This is fine on non-MSI as well, as if we hit this path
* we avoid exiting the interrupt handler only to generate
* another one.
*
* Note that for MSI this could cause a stray interrupt report
* if an interrupt landed in the time between writing IIR and
* the posting read. This should be rare enough to never
* trigger the 99% of 100,000 interrupts test for disabling
* stray interrupts.
*/
iir = new_iir;
}
i915_update_dri1_breadcrumb(dev);
return ret;
}
static void i965_irq_uninstall(struct drm_device * dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
if (!dev_priv)
return;
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
I915_WRITE(HWSTAM, 0xffffffff);
for_each_pipe(dev_priv, pipe)
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
for_each_pipe(dev_priv, pipe)
I915_WRITE(PIPESTAT(pipe),
I915_READ(PIPESTAT(pipe)) & 0x8000ffff);
I915_WRITE(IIR, I915_READ(IIR));
}
static void intel_hpd_irq_reenable_work(struct work_struct *work)
{
struct drm_i915_private *dev_priv =
container_of(work, typeof(*dev_priv),
hotplug_reenable_work.work);
struct drm_device *dev = dev_priv->dev;
struct drm_mode_config *mode_config = &dev->mode_config;
int i;
intel_runtime_pm_get(dev_priv);
spin_lock_irq(&dev_priv->irq_lock);
for (i = (HPD_NONE + 1); i < HPD_NUM_PINS; i++) {
struct drm_connector *connector;
if (dev_priv->hpd_stats[i].hpd_mark != HPD_DISABLED)
continue;
dev_priv->hpd_stats[i].hpd_mark = HPD_ENABLED;
list_for_each_entry(connector, &mode_config->connector_list, head) {
struct intel_connector *intel_connector = to_intel_connector(connector);
if (intel_connector->encoder->hpd_pin == i) {
if (connector->polled != intel_connector->polled)
DRM_DEBUG_DRIVER("Reenabling HPD on connector %s\n",
connector->name);
connector->polled = intel_connector->polled;
if (!connector->polled)
connector->polled = DRM_CONNECTOR_POLL_HPD;
}
}
}
if (dev_priv->display.hpd_irq_setup)
dev_priv->display.hpd_irq_setup(dev);
spin_unlock_irq(&dev_priv->irq_lock);
intel_runtime_pm_put(dev_priv);
}
void intel_irq_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
INIT_WORK(&dev_priv->dig_port_work, i915_digport_work_func);
INIT_WORK(&dev_priv->gpu_error.work, i915_error_work_func);
INIT_WORK(&dev_priv->rps.work, gen6_pm_rps_work);
INIT_WORK(&dev_priv->l3_parity.error_work, ivybridge_parity_work);
/* Let's track the enabled rps events */
if (IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev))
/* WaGsvRC0ResidencyMethod:vlv */
dev_priv->pm_rps_events = GEN6_PM_RP_UP_EI_EXPIRED;
else
dev_priv->pm_rps_events = GEN6_PM_RPS_EVENTS;
setup_timer(&dev_priv->gpu_error.hangcheck_timer,
i915_hangcheck_elapsed,
(unsigned long) dev);
INIT_DELAYED_WORK(&dev_priv->hotplug_reenable_work,
intel_hpd_irq_reenable_work);
pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY, PM_QOS_DEFAULT_VALUE);
/* Haven't installed the IRQ handler yet */
dev_priv->pm._irqs_disabled = true;
if (IS_GEN2(dev)) {
dev->max_vblank_count = 0;
dev->driver->get_vblank_counter = i8xx_get_vblank_counter;
} else if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
dev->driver->get_vblank_counter = gm45_get_vblank_counter;
} else {
dev->driver->get_vblank_counter = i915_get_vblank_counter;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
}
/*
* Opt out of the vblank disable timer on everything except gen2.
* Gen2 doesn't have a hardware frame counter and so depends on
* vblank interrupts to produce sane vblank seuquence numbers.
*/
if (!IS_GEN2(dev))
dev->vblank_disable_immediate = true;
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp;
dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
}
if (IS_CHERRYVIEW(dev)) {
dev->driver->irq_handler = cherryview_irq_handler;
dev->driver->irq_preinstall = cherryview_irq_preinstall;
dev->driver->irq_postinstall = cherryview_irq_postinstall;
dev->driver->irq_uninstall = cherryview_irq_uninstall;
dev->driver->enable_vblank = valleyview_enable_vblank;
dev->driver->disable_vblank = valleyview_disable_vblank;
dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
} else if (IS_VALLEYVIEW(dev)) {
dev->driver->irq_handler = valleyview_irq_handler;
dev->driver->irq_preinstall = valleyview_irq_preinstall;
dev->driver->irq_postinstall = valleyview_irq_postinstall;
dev->driver->irq_uninstall = valleyview_irq_uninstall;
dev->driver->enable_vblank = valleyview_enable_vblank;
dev->driver->disable_vblank = valleyview_disable_vblank;
dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
} else if (INTEL_INFO(dev)->gen >= 8) {
dev->driver->irq_handler = gen8_irq_handler;
dev->driver->irq_preinstall = gen8_irq_reset;
dev->driver->irq_postinstall = gen8_irq_postinstall;
dev->driver->irq_uninstall = gen8_irq_uninstall;
dev->driver->enable_vblank = gen8_enable_vblank;
dev->driver->disable_vblank = gen8_disable_vblank;
dev_priv->display.hpd_irq_setup = ibx_hpd_irq_setup;
} else if (HAS_PCH_SPLIT(dev)) {
dev->driver->irq_handler = ironlake_irq_handler;
dev->driver->irq_preinstall = ironlake_irq_reset;
dev->driver->irq_postinstall = ironlake_irq_postinstall;
dev->driver->irq_uninstall = ironlake_irq_uninstall;
dev->driver->enable_vblank = ironlake_enable_vblank;
dev->driver->disable_vblank = ironlake_disable_vblank;
dev_priv->display.hpd_irq_setup = ibx_hpd_irq_setup;
} else {
if (INTEL_INFO(dev)->gen == 2) {
dev->driver->irq_preinstall = i8xx_irq_preinstall;
dev->driver->irq_postinstall = i8xx_irq_postinstall;
dev->driver->irq_handler = i8xx_irq_handler;
dev->driver->irq_uninstall = i8xx_irq_uninstall;
} else if (INTEL_INFO(dev)->gen == 3) {
dev->driver->irq_preinstall = i915_irq_preinstall;
dev->driver->irq_postinstall = i915_irq_postinstall;
dev->driver->irq_uninstall = i915_irq_uninstall;
dev->driver->irq_handler = i915_irq_handler;
dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
} else {
dev->driver->irq_preinstall = i965_irq_preinstall;
dev->driver->irq_postinstall = i965_irq_postinstall;
dev->driver->irq_uninstall = i965_irq_uninstall;
dev->driver->irq_handler = i965_irq_handler;
dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
}
dev->driver->enable_vblank = i915_enable_vblank;
dev->driver->disable_vblank = i915_disable_vblank;
}
}
void intel_hpd_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
int i;
for (i = 1; i < HPD_NUM_PINS; i++) {
dev_priv->hpd_stats[i].hpd_cnt = 0;
dev_priv->hpd_stats[i].hpd_mark = HPD_ENABLED;
}
list_for_each_entry(connector, &mode_config->connector_list, head) {
struct intel_connector *intel_connector = to_intel_connector(connector);
connector->polled = intel_connector->polled;
if (connector->encoder && !connector->polled && I915_HAS_HOTPLUG(dev) && intel_connector->encoder->hpd_pin > HPD_NONE)
connector->polled = DRM_CONNECTOR_POLL_HPD;
if (intel_connector->mst_port)
connector->polled = DRM_CONNECTOR_POLL_HPD;
}
/* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked checks happy. */
spin_lock_irq(&dev_priv->irq_lock);
if (dev_priv->display.hpd_irq_setup)
dev_priv->display.hpd_irq_setup(dev);
spin_unlock_irq(&dev_priv->irq_lock);
}
/* Disable interrupts so we can allow runtime PM. */
void intel_runtime_pm_disable_interrupts(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
dev->driver->irq_uninstall(dev);
dev_priv->pm._irqs_disabled = true;
}
/* Restore interrupts so we can recover from runtime PM. */
void intel_runtime_pm_restore_interrupts(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->pm._irqs_disabled = false;
dev->driver->irq_preinstall(dev);
dev->driver->irq_postinstall(dev);
}