| /* |
| * ST's Remote Processor Control Driver |
| * |
| * Copyright (C) 2015 STMicroelectronics - All Rights Reserved |
| * |
| * Author: Ludovic Barre <ludovic.barre@st.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/mailbox_client.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_reserved_mem.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/remoteproc.h> |
| #include <linux/reset.h> |
| |
| #include "remoteproc_internal.h" |
| |
| #define ST_RPROC_VQ0 0 |
| #define ST_RPROC_VQ1 1 |
| #define ST_RPROC_MAX_VRING 2 |
| |
| #define MBOX_RX 0 |
| #define MBOX_TX 1 |
| #define MBOX_MAX 2 |
| |
| struct st_rproc_config { |
| bool sw_reset; |
| bool pwr_reset; |
| unsigned long bootaddr_mask; |
| }; |
| |
| struct st_rproc { |
| struct st_rproc_config *config; |
| struct reset_control *sw_reset; |
| struct reset_control *pwr_reset; |
| struct clk *clk; |
| u32 clk_rate; |
| struct regmap *boot_base; |
| u32 boot_offset; |
| struct mbox_chan *mbox_chan[ST_RPROC_MAX_VRING * MBOX_MAX]; |
| struct mbox_client mbox_client_vq0; |
| struct mbox_client mbox_client_vq1; |
| }; |
| |
| static void st_rproc_mbox_callback(struct device *dev, u32 msg) |
| { |
| struct rproc *rproc = dev_get_drvdata(dev); |
| |
| if (rproc_vq_interrupt(rproc, msg) == IRQ_NONE) |
| dev_dbg(dev, "no message was found in vqid %d\n", msg); |
| } |
| |
| static |
| void st_rproc_mbox_callback_vq0(struct mbox_client *mbox_client, void *data) |
| { |
| st_rproc_mbox_callback(mbox_client->dev, 0); |
| } |
| |
| static |
| void st_rproc_mbox_callback_vq1(struct mbox_client *mbox_client, void *data) |
| { |
| st_rproc_mbox_callback(mbox_client->dev, 1); |
| } |
| |
| static void st_rproc_kick(struct rproc *rproc, int vqid) |
| { |
| struct st_rproc *ddata = rproc->priv; |
| struct device *dev = rproc->dev.parent; |
| int ret; |
| |
| /* send the index of the triggered virtqueue in the mailbox payload */ |
| if (WARN_ON(vqid >= ST_RPROC_MAX_VRING)) |
| return; |
| |
| ret = mbox_send_message(ddata->mbox_chan[vqid * MBOX_MAX + MBOX_TX], |
| (void *)&vqid); |
| if (ret < 0) |
| dev_err(dev, "failed to send message via mbox: %d\n", ret); |
| } |
| |
| static int st_rproc_start(struct rproc *rproc) |
| { |
| struct st_rproc *ddata = rproc->priv; |
| int err; |
| |
| regmap_update_bits(ddata->boot_base, ddata->boot_offset, |
| ddata->config->bootaddr_mask, rproc->bootaddr); |
| |
| err = clk_enable(ddata->clk); |
| if (err) { |
| dev_err(&rproc->dev, "Failed to enable clock\n"); |
| return err; |
| } |
| |
| if (ddata->config->sw_reset) { |
| err = reset_control_deassert(ddata->sw_reset); |
| if (err) { |
| dev_err(&rproc->dev, "Failed to deassert S/W Reset\n"); |
| goto sw_reset_fail; |
| } |
| } |
| |
| if (ddata->config->pwr_reset) { |
| err = reset_control_deassert(ddata->pwr_reset); |
| if (err) { |
| dev_err(&rproc->dev, "Failed to deassert Power Reset\n"); |
| goto pwr_reset_fail; |
| } |
| } |
| |
| dev_info(&rproc->dev, "Started from 0x%x\n", rproc->bootaddr); |
| |
| return 0; |
| |
| |
| pwr_reset_fail: |
| if (ddata->config->pwr_reset) |
| reset_control_assert(ddata->sw_reset); |
| sw_reset_fail: |
| clk_disable(ddata->clk); |
| |
| return err; |
| } |
| |
| static int st_rproc_stop(struct rproc *rproc) |
| { |
| struct st_rproc *ddata = rproc->priv; |
| int sw_err = 0, pwr_err = 0; |
| |
| if (ddata->config->sw_reset) { |
| sw_err = reset_control_assert(ddata->sw_reset); |
| if (sw_err) |
| dev_err(&rproc->dev, "Failed to assert S/W Reset\n"); |
| } |
| |
| if (ddata->config->pwr_reset) { |
| pwr_err = reset_control_assert(ddata->pwr_reset); |
| if (pwr_err) |
| dev_err(&rproc->dev, "Failed to assert Power Reset\n"); |
| } |
| |
| clk_disable(ddata->clk); |
| |
| return sw_err ?: pwr_err; |
| } |
| |
| static const struct rproc_ops st_rproc_ops = { |
| .kick = st_rproc_kick, |
| .start = st_rproc_start, |
| .stop = st_rproc_stop, |
| }; |
| |
| /* |
| * Fetch state of the processor: 0 is off, 1 is on. |
| */ |
| static int st_rproc_state(struct platform_device *pdev) |
| { |
| struct rproc *rproc = platform_get_drvdata(pdev); |
| struct st_rproc *ddata = rproc->priv; |
| int reset_sw = 0, reset_pwr = 0; |
| |
| if (ddata->config->sw_reset) |
| reset_sw = reset_control_status(ddata->sw_reset); |
| |
| if (ddata->config->pwr_reset) |
| reset_pwr = reset_control_status(ddata->pwr_reset); |
| |
| if (reset_sw < 0 || reset_pwr < 0) |
| return -EINVAL; |
| |
| return !reset_sw && !reset_pwr; |
| } |
| |
| static const struct st_rproc_config st40_rproc_cfg = { |
| .sw_reset = true, |
| .pwr_reset = true, |
| .bootaddr_mask = GENMASK(28, 1), |
| }; |
| |
| static const struct st_rproc_config st231_rproc_cfg = { |
| .sw_reset = true, |
| .pwr_reset = false, |
| .bootaddr_mask = GENMASK(31, 6), |
| }; |
| |
| static const struct of_device_id st_rproc_match[] = { |
| { .compatible = "st,st40-rproc", .data = &st40_rproc_cfg }, |
| { .compatible = "st,st231-rproc", .data = &st231_rproc_cfg }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, st_rproc_match); |
| |
| static int st_rproc_parse_dt(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct rproc *rproc = platform_get_drvdata(pdev); |
| struct st_rproc *ddata = rproc->priv; |
| struct device_node *np = dev->of_node; |
| int err; |
| |
| if (ddata->config->sw_reset) { |
| ddata->sw_reset = devm_reset_control_get(dev, "sw_reset"); |
| if (IS_ERR(ddata->sw_reset)) { |
| dev_err(dev, "Failed to get S/W Reset\n"); |
| return PTR_ERR(ddata->sw_reset); |
| } |
| } |
| |
| if (ddata->config->pwr_reset) { |
| ddata->pwr_reset = devm_reset_control_get(dev, "pwr_reset"); |
| if (IS_ERR(ddata->pwr_reset)) { |
| dev_err(dev, "Failed to get Power Reset\n"); |
| return PTR_ERR(ddata->pwr_reset); |
| } |
| } |
| |
| ddata->clk = devm_clk_get(dev, NULL); |
| if (IS_ERR(ddata->clk)) { |
| dev_err(dev, "Failed to get clock\n"); |
| return PTR_ERR(ddata->clk); |
| } |
| |
| err = of_property_read_u32(np, "clock-frequency", &ddata->clk_rate); |
| if (err) { |
| dev_err(dev, "failed to get clock frequency\n"); |
| return err; |
| } |
| |
| ddata->boot_base = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); |
| if (IS_ERR(ddata->boot_base)) { |
| dev_err(dev, "Boot base not found\n"); |
| return PTR_ERR(ddata->boot_base); |
| } |
| |
| err = of_property_read_u32_index(np, "st,syscfg", 1, |
| &ddata->boot_offset); |
| if (err) { |
| dev_err(dev, "Boot offset not found\n"); |
| return -EINVAL; |
| } |
| |
| err = of_reserved_mem_device_init(dev); |
| if (err) { |
| dev_err(dev, "Failed to obtain shared memory\n"); |
| return err; |
| } |
| |
| err = clk_prepare(ddata->clk); |
| if (err) |
| dev_err(dev, "failed to get clock\n"); |
| |
| return err; |
| } |
| |
| static int st_rproc_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| const struct of_device_id *match; |
| struct st_rproc *ddata; |
| struct device_node *np = dev->of_node; |
| struct rproc *rproc; |
| struct mbox_chan *chan; |
| int enabled; |
| int ret, i; |
| |
| match = of_match_device(st_rproc_match, dev); |
| if (!match || !match->data) { |
| dev_err(dev, "No device match found\n"); |
| return -ENODEV; |
| } |
| |
| rproc = rproc_alloc(dev, np->name, &st_rproc_ops, NULL, sizeof(*ddata)); |
| if (!rproc) |
| return -ENOMEM; |
| |
| rproc->has_iommu = false; |
| ddata = rproc->priv; |
| ddata->config = (struct st_rproc_config *)match->data; |
| |
| platform_set_drvdata(pdev, rproc); |
| |
| ret = st_rproc_parse_dt(pdev); |
| if (ret) |
| goto free_rproc; |
| |
| enabled = st_rproc_state(pdev); |
| if (enabled < 0) { |
| ret = enabled; |
| goto free_clk; |
| } |
| |
| if (enabled) { |
| atomic_inc(&rproc->power); |
| rproc->state = RPROC_RUNNING; |
| } else { |
| clk_set_rate(ddata->clk, ddata->clk_rate); |
| } |
| |
| if (of_get_property(np, "mbox-names", NULL)) { |
| ddata->mbox_client_vq0.dev = dev; |
| ddata->mbox_client_vq0.tx_done = NULL; |
| ddata->mbox_client_vq0.tx_block = false; |
| ddata->mbox_client_vq0.knows_txdone = false; |
| ddata->mbox_client_vq0.rx_callback = st_rproc_mbox_callback_vq0; |
| |
| ddata->mbox_client_vq1.dev = dev; |
| ddata->mbox_client_vq1.tx_done = NULL; |
| ddata->mbox_client_vq1.tx_block = false; |
| ddata->mbox_client_vq1.knows_txdone = false; |
| ddata->mbox_client_vq1.rx_callback = st_rproc_mbox_callback_vq1; |
| |
| /* |
| * To control a co-processor without IPC mechanism. |
| * This driver can be used without mbox and rpmsg. |
| */ |
| chan = mbox_request_channel_byname(&ddata->mbox_client_vq0, "vq0_rx"); |
| if (IS_ERR(chan)) { |
| dev_err(&rproc->dev, "failed to request mbox chan 0\n"); |
| ret = PTR_ERR(chan); |
| goto free_clk; |
| } |
| ddata->mbox_chan[ST_RPROC_VQ0 * MBOX_MAX + MBOX_RX] = chan; |
| |
| chan = mbox_request_channel_byname(&ddata->mbox_client_vq0, "vq0_tx"); |
| if (IS_ERR(chan)) { |
| dev_err(&rproc->dev, "failed to request mbox chan 0\n"); |
| ret = PTR_ERR(chan); |
| goto free_mbox; |
| } |
| ddata->mbox_chan[ST_RPROC_VQ0 * MBOX_MAX + MBOX_TX] = chan; |
| |
| chan = mbox_request_channel_byname(&ddata->mbox_client_vq1, "vq1_rx"); |
| if (IS_ERR(chan)) { |
| dev_err(&rproc->dev, "failed to request mbox chan 1\n"); |
| ret = PTR_ERR(chan); |
| goto free_mbox; |
| } |
| ddata->mbox_chan[ST_RPROC_VQ1 * MBOX_MAX + MBOX_RX] = chan; |
| |
| chan = mbox_request_channel_byname(&ddata->mbox_client_vq1, "vq1_tx"); |
| if (IS_ERR(chan)) { |
| dev_err(&rproc->dev, "failed to request mbox chan 1\n"); |
| ret = PTR_ERR(chan); |
| goto free_mbox; |
| } |
| ddata->mbox_chan[ST_RPROC_VQ1 * MBOX_MAX + MBOX_TX] = chan; |
| } |
| |
| ret = rproc_add(rproc); |
| if (ret) |
| goto free_mbox; |
| |
| return 0; |
| |
| free_mbox: |
| for (i = 0; i < ST_RPROC_MAX_VRING * MBOX_MAX; i++) |
| mbox_free_channel(ddata->mbox_chan[i]); |
| free_clk: |
| clk_unprepare(ddata->clk); |
| free_rproc: |
| rproc_free(rproc); |
| return ret; |
| } |
| |
| static int st_rproc_remove(struct platform_device *pdev) |
| { |
| struct rproc *rproc = platform_get_drvdata(pdev); |
| struct st_rproc *ddata = rproc->priv; |
| int i; |
| |
| rproc_del(rproc); |
| |
| clk_disable_unprepare(ddata->clk); |
| |
| of_reserved_mem_device_release(&pdev->dev); |
| |
| for (i = 0; i < ST_RPROC_MAX_VRING * MBOX_MAX; i++) |
| mbox_free_channel(ddata->mbox_chan[i]); |
| |
| rproc_free(rproc); |
| |
| return 0; |
| } |
| |
| static struct platform_driver st_rproc_driver = { |
| .probe = st_rproc_probe, |
| .remove = st_rproc_remove, |
| .driver = { |
| .name = "st-rproc", |
| .of_match_table = of_match_ptr(st_rproc_match), |
| }, |
| }; |
| module_platform_driver(st_rproc_driver); |
| |
| MODULE_DESCRIPTION("ST Remote Processor Control Driver"); |
| MODULE_AUTHOR("Ludovic Barre <ludovic.barre@st.com>"); |
| MODULE_LICENSE("GPL v2"); |