| /* |
| * AD8366 SPI Dual-Digital Variable Gain Amplifier (VGA) |
| * |
| * Copyright 2012 Analog Devices Inc. |
| * |
| * Licensed under the GPL-2. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/sysfs.h> |
| #include <linux/spi/spi.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/bitrev.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| |
| struct ad8366_state { |
| struct spi_device *spi; |
| struct regulator *reg; |
| unsigned char ch[2]; |
| /* |
| * DMA (thus cache coherency maintenance) requires the |
| * transfer buffers to live in their own cache lines. |
| */ |
| unsigned char data[2] ____cacheline_aligned; |
| }; |
| |
| static int ad8366_write(struct iio_dev *indio_dev, |
| unsigned char ch_a, char unsigned ch_b) |
| { |
| struct ad8366_state *st = iio_priv(indio_dev); |
| int ret; |
| |
| ch_a = bitrev8(ch_a & 0x3F); |
| ch_b = bitrev8(ch_b & 0x3F); |
| |
| st->data[0] = ch_b >> 4; |
| st->data[1] = (ch_b << 4) | (ch_a >> 2); |
| |
| ret = spi_write(st->spi, st->data, ARRAY_SIZE(st->data)); |
| if (ret < 0) |
| dev_err(&indio_dev->dev, "write failed (%d)", ret); |
| |
| return ret; |
| } |
| |
| static int ad8366_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, |
| int *val2, |
| long m) |
| { |
| struct ad8366_state *st = iio_priv(indio_dev); |
| int ret; |
| unsigned code; |
| |
| mutex_lock(&indio_dev->mlock); |
| switch (m) { |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| code = st->ch[chan->channel]; |
| |
| /* Values in dB */ |
| code = code * 253 + 4500; |
| *val = code / 1000; |
| *val2 = (code % 1000) * 1000; |
| |
| ret = IIO_VAL_INT_PLUS_MICRO_DB; |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| mutex_unlock(&indio_dev->mlock); |
| |
| return ret; |
| }; |
| |
| static int ad8366_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, |
| int val2, |
| long mask) |
| { |
| struct ad8366_state *st = iio_priv(indio_dev); |
| unsigned code; |
| int ret; |
| |
| if (val < 0 || val2 < 0) |
| return -EINVAL; |
| |
| /* Values in dB */ |
| code = (((u8)val * 1000) + ((u32)val2 / 1000)); |
| |
| if (code > 20500 || code < 4500) |
| return -EINVAL; |
| |
| code = (code - 4500) / 253; |
| |
| mutex_lock(&indio_dev->mlock); |
| switch (mask) { |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| st->ch[chan->channel] = code; |
| ret = ad8366_write(indio_dev, st->ch[0], st->ch[1]); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| mutex_unlock(&indio_dev->mlock); |
| |
| return ret; |
| } |
| |
| static const struct iio_info ad8366_info = { |
| .read_raw = &ad8366_read_raw, |
| .write_raw = &ad8366_write_raw, |
| .driver_module = THIS_MODULE, |
| }; |
| |
| #define AD8366_CHAN(_channel) { \ |
| .type = IIO_VOLTAGE, \ |
| .output = 1, \ |
| .indexed = 1, \ |
| .channel = _channel, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN),\ |
| } |
| |
| static const struct iio_chan_spec ad8366_channels[] = { |
| AD8366_CHAN(0), |
| AD8366_CHAN(1), |
| }; |
| |
| static int ad8366_probe(struct spi_device *spi) |
| { |
| struct iio_dev *indio_dev; |
| struct ad8366_state *st; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); |
| if (indio_dev == NULL) |
| return -ENOMEM; |
| |
| st = iio_priv(indio_dev); |
| |
| st->reg = devm_regulator_get(&spi->dev, "vcc"); |
| if (!IS_ERR(st->reg)) { |
| ret = regulator_enable(st->reg); |
| if (ret) |
| return ret; |
| } |
| |
| spi_set_drvdata(spi, indio_dev); |
| st->spi = spi; |
| |
| indio_dev->dev.parent = &spi->dev; |
| indio_dev->name = spi_get_device_id(spi)->name; |
| indio_dev->info = &ad8366_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = ad8366_channels; |
| indio_dev->num_channels = ARRAY_SIZE(ad8366_channels); |
| |
| ret = iio_device_register(indio_dev); |
| if (ret) |
| goto error_disable_reg; |
| |
| ad8366_write(indio_dev, 0 , 0); |
| |
| return 0; |
| |
| error_disable_reg: |
| if (!IS_ERR(st->reg)) |
| regulator_disable(st->reg); |
| |
| return ret; |
| } |
| |
| static int ad8366_remove(struct spi_device *spi) |
| { |
| struct iio_dev *indio_dev = spi_get_drvdata(spi); |
| struct ad8366_state *st = iio_priv(indio_dev); |
| struct regulator *reg = st->reg; |
| |
| iio_device_unregister(indio_dev); |
| |
| if (!IS_ERR(reg)) { |
| regulator_disable(reg); |
| regulator_put(reg); |
| } |
| |
| return 0; |
| } |
| |
| static const struct spi_device_id ad8366_id[] = { |
| {"ad8366", 0}, |
| {} |
| }; |
| |
| static struct spi_driver ad8366_driver = { |
| .driver = { |
| .name = KBUILD_MODNAME, |
| .owner = THIS_MODULE, |
| }, |
| .probe = ad8366_probe, |
| .remove = ad8366_remove, |
| .id_table = ad8366_id, |
| }; |
| |
| module_spi_driver(ad8366_driver); |
| |
| MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); |
| MODULE_DESCRIPTION("Analog Devices AD8366 VGA"); |
| MODULE_LICENSE("GPL v2"); |