Merge commit 'origin/master' into next
Manual merge of:
arch/powerpc/include/asm/elf.h
drivers/i2c/busses/i2c-mpc.c
diff --git a/Documentation/powerpc/dts-bindings/fsl/dma.txt b/Documentation/powerpc/dts-bindings/fsl/dma.txt
index cc45311..0732cdd 100644
--- a/Documentation/powerpc/dts-bindings/fsl/dma.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/dma.txt
@@ -35,30 +35,30 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
- reg = <82a8 4>;
- ranges = <0 8100 1a4>;
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a4>;
interrupt-parent = <&ipic>;
- interrupts = <47 8>;
+ interrupts = <71 8>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
cell-index = <0>;
- reg = <0 80>;
+ reg = <0 0x80>;
};
dma-channel@80 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
cell-index = <1>;
- reg = <80 80>;
+ reg = <0x80 0x80>;
};
dma-channel@100 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
cell-index = <2>;
- reg = <100 80>;
+ reg = <0x100 0x80>;
};
dma-channel@180 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
cell-index = <3>;
- reg = <180 80>;
+ reg = <0x180 0x80>;
};
};
@@ -93,36 +93,36 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
- reg = <21300 4>;
- ranges = <0 21100 200>;
+ reg = <0x21300 4>;
+ ranges = <0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0 80>;
+ reg = <0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
- interrupts = <14 2>;
+ interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
- reg = <80 80>;
+ reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
- interrupts = <15 2>;
+ interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
- reg = <100 80>;
+ reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
- reg = <180 80>;
+ reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
- interrupts = <17 2>;
+ interrupts = <23 2>;
};
};
diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
new file mode 100644
index 0000000..6008465
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
@@ -0,0 +1,24 @@
+* Freescale Enhanced Secure Digital Host Controller (eSDHC)
+
+The Enhanced Secure Digital Host Controller provides an interface
+for MMC, SD, and SDIO types of memory cards.
+
+Required properties:
+ - compatible : should be
+ "fsl,<chip>-esdhc", "fsl,mpc8379-esdhc" for MPC83xx processors.
+ "fsl,<chip>-esdhc", "fsl,mpc8536-esdhc" for MPC85xx processors.
+ - reg : should contain eSDHC registers location and length.
+ - interrupts : should contain eSDHC interrupt.
+ - interrupt-parent : interrupt source phandle.
+ - clock-frequency : specifies eSDHC base clock frequency.
+
+Example:
+
+sdhci@2e000 {
+ compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+};
diff --git a/Documentation/powerpc/dts-bindings/fsl/ssi.txt b/Documentation/powerpc/dts-bindings/fsl/ssi.txt
index a2d9639..5ff76c9 100644
--- a/Documentation/powerpc/dts-bindings/fsl/ssi.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/ssi.txt
@@ -4,44 +4,56 @@
be programmed in AC97, I2S, left-justified, or right-justified modes.
Required properties:
-- compatible : compatible list, containing "fsl,ssi"
-- cell-index : the SSI, <0> = SSI1, <1> = SSI2, and so on
-- reg : offset and length of the register set for the device
-- interrupts : <a b> where a is the interrupt number and b is a
- field that represents an encoding of the sense and
- level information for the interrupt. This should be
- encoded based on the information in section 2)
- depending on the type of interrupt controller you
- have.
-- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
-- fsl,mode : the operating mode for the SSI interface
- "i2s-slave" - I2S mode, SSI is clock slave
- "i2s-master" - I2S mode, SSI is clock master
- "lj-slave" - left-justified mode, SSI is clock slave
- "lj-master" - l.j. mode, SSI is clock master
- "rj-slave" - right-justified mode, SSI is clock slave
- "rj-master" - r.j., SSI is clock master
- "ac97-slave" - AC97 mode, SSI is clock slave
- "ac97-master" - AC97 mode, SSI is clock master
-- fsl,playback-dma: phandle to a node for the DMA channel to use for
+- compatible: Compatible list, contains "fsl,ssi".
+- cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on.
+- reg: Offset and length of the register set for the device.
+- interrupts: <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and
+ level information for the interrupt. This should be
+ encoded based on the information in section 2)
+ depending on the type of interrupt controller you
+ have.
+- interrupt-parent: The phandle for the interrupt controller that
+ services interrupts for this device.
+- fsl,mode: The operating mode for the SSI interface.
+ "i2s-slave" - I2S mode, SSI is clock slave
+ "i2s-master" - I2S mode, SSI is clock master
+ "lj-slave" - left-justified mode, SSI is clock slave
+ "lj-master" - l.j. mode, SSI is clock master
+ "rj-slave" - right-justified mode, SSI is clock slave
+ "rj-master" - r.j., SSI is clock master
+ "ac97-slave" - AC97 mode, SSI is clock slave
+ "ac97-master" - AC97 mode, SSI is clock master
+- fsl,playback-dma: Phandle to a node for the DMA channel to use for
playback of audio. This is typically dictated by SOC
design. See the notes below.
-- fsl,capture-dma: phandle to a node for the DMA channel to use for
+- fsl,capture-dma: Phandle to a node for the DMA channel to use for
capture (recording) of audio. This is typically dictated
by SOC design. See the notes below.
+- fsl,fifo-depth: The number of elements in the transmit and receive FIFOs.
+ This number is the maximum allowed value for SFCSR[TFWM0].
+- fsl,ssi-asynchronous:
+ If specified, the SSI is to be programmed in asynchronous
+ mode. In this mode, pins SRCK, STCK, SRFS, and STFS must
+ all be connected to valid signals. In synchronous mode,
+ SRCK and SRFS are ignored. Asynchronous mode allows
+ playback and capture to use different sample sizes and
+ sample rates. Some drivers may require that SRCK and STCK
+ be connected together, and SRFS and STFS be connected
+ together. This would still allow different sample sizes,
+ but not different sample rates.
Optional properties:
-- codec-handle : phandle to a 'codec' node that defines an audio
- codec connected to this SSI. This node is typically
- a child of an I2C or other control node.
+- codec-handle: Phandle to a 'codec' node that defines an audio
+ codec connected to this SSI. This node is typically
+ a child of an I2C or other control node.
Child 'codec' node required properties:
-- compatible : compatible list, contains the name of the codec
+- compatible: Compatible list, contains the name of the codec
Child 'codec' node optional properties:
-- clock-frequency : The frequency of the input clock, which typically
- comes from an on-board dedicated oscillator.
+- clock-frequency: The frequency of the input clock, which typically comes
+ from an on-board dedicated oscillator.
Notes on fsl,playback-dma and fsl,capture-dma:
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 74cc312..ad6b1c0 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -111,6 +111,7 @@
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE
select HAVE_FUNCTION_TRACER
+ select HAVE_FUNCTION_GRAPH_TRACER
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_IDE
select HAVE_IOREMAP_PROT
@@ -312,7 +313,7 @@
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
- depends on (PPC_PRPMC2800 || PPC_MULTIPLATFORM) && EXPERIMENTAL
+ depends on BOOK3S && EXPERIMENTAL
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
@@ -409,6 +410,18 @@
depends on PPC64
default n
+config STDBINUTILS
+ bool "Using standard binutils settings"
+ depends on 44x
+ default y
+ help
+ Turning this option off allows you to select 256KB PAGE_SIZE on 44x.
+ Note, that kernel will be able to run only those applications,
+ which had been compiled using binutils later than 2.17.50.0.3 with
+ '-zmax-page-size' set to 256K (the default is 64K). Or, if using
+ the older binutils, you can patch them with a trivial patch, which
+ changes the ELF_MAXPAGESIZE definition from 0x10000 to 0x40000.
+
choice
prompt "Page size"
default PPC_4K_PAGES
@@ -444,6 +457,19 @@
bool "64k page size" if 44x || PPC_STD_MMU_64
select PPC_HAS_HASH_64K if PPC_STD_MMU_64
+config PPC_256K_PAGES
+ bool "256k page size" if 44x
+ depends on !STDBINUTILS && (!SHMEM || BROKEN)
+ help
+ Make the page size 256k.
+
+ As the ELF standard only requires alignment to support page
+ sizes up to 64k, you will need to compile all of your user
+ space applications with a non-standard binutils settings
+ (see the STDBINUTILS description for details).
+
+ Say N unless you know what you are doing.
+
endchoice
config FORCE_MAX_ZONEORDER
@@ -456,6 +482,8 @@
default "9" if PPC_STD_MMU_32 && PPC_16K_PAGES
range 7 64 if PPC_STD_MMU_32 && PPC_64K_PAGES
default "7" if PPC_STD_MMU_32 && PPC_64K_PAGES
+ range 5 64 if PPC_STD_MMU_32 && PPC_256K_PAGES
+ default "5" if PPC_STD_MMU_32 && PPC_256K_PAGES
range 11 64
default "11"
help
@@ -594,6 +622,7 @@
config FSL_PCI
bool
select PPC_INDIRECT_PCI
+ select PCI_QUIRKS
config 4xx_SOC
bool
@@ -730,6 +759,22 @@
hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
default "0x30000000"
+config LOWMEM_CAM_NUM_BOOL
+ bool "Set number of CAMs to use to map low memory"
+ depends on ADVANCED_OPTIONS && FSL_BOOKE
+ help
+ This option allows you to set the maximum number of CAM slots that
+ will be used to map low memory. There are a limited number of slots
+ available and even more limited number that will fit in the L1 MMU.
+ However, using more entries will allow mapping more low memory. This
+ can be useful in optimizing the layout of kernel virtual memory.
+
+ Say N here unless you know what you are doing.
+
+config LOWMEM_CAM_NUM
+ int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL
+ default 3
+
config RELOCATABLE
bool "Build a relocatable kernel (EXPERIMENTAL)"
depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE
@@ -794,7 +839,7 @@
config PHYSICAL_ALIGN
hex
- default "0x10000000" if FSL_BOOKE
+ default "0x04000000" if FSL_BOOKE
help
This value puts the alignment restrictions on physical address
where kernel is loaded and run from. Kernel is compiled for an
@@ -815,31 +860,6 @@
default "0x80000000" if PPC_PREP || PPC_8xx
default "0xc0000000"
-config CONSISTENT_START_BOOL
- bool "Set custom consistent memory pool address"
- depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
- help
- This option allows you to set the base virtual address
- of the consistent memory pool. This pool of virtual
- memory is used to make consistent memory allocations.
-
-config CONSISTENT_START
- hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
- default "0xfd000000" if (NOT_COHERENT_CACHE && 8xx)
- default "0xff100000" if NOT_COHERENT_CACHE
-
-config CONSISTENT_SIZE_BOOL
- bool "Set custom consistent memory pool size"
- depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
- help
- This option allows you to set the size of the
- consistent memory pool. This pool of virtual memory
- is used to make consistent memory allocations.
-
-config CONSISTENT_SIZE
- hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
- default "0x00200000" if NOT_COHERENT_CACHE
-
config PIN_TLB
bool "Pinned Kernel TLBs (860 ONLY)"
depends on ADVANCED_OPTIONS && 8xx
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 08f7cc0..22091bb 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -129,7 +129,7 @@
config BOOTX_TEXT
bool "Support for early boot text console (BootX or OpenFirmware only)"
- depends on PPC_OF && PPC_MULTIPLATFORM
+ depends on PPC_OF && PPC_BOOK3S
help
Say Y here to see progress messages from the boot firmware in text
mode. Requires either BootX or Open Firmware.
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 72d17f5..551fc58 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -147,8 +147,8 @@
arch/powerpc/mm/ \
arch/powerpc/lib/ \
arch/powerpc/sysdev/ \
- arch/powerpc/platforms/
-core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/
+ arch/powerpc/platforms/ \
+ arch/powerpc/math-emu/
core-$(CONFIG_XMON) += arch/powerpc/xmon/
core-$(CONFIG_KVM) += arch/powerpc/kvm/
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index e84df33..4458abb 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -70,7 +70,7 @@
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
- cuboot-acadia.c
+ cuboot-acadia.c cuboot-amigaone.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -235,7 +235,9 @@
dtbImage.adder875-redboot
# Board ports in arch/powerpc/platform/52xx/Kconfig
-image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 cuImage.lite5200b
+image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 lite5200.dtb
+image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b lite5200b.dtb
+image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 media5200.dtb
# Board ports in arch/powerpc/platform/82xx/Kconfig
image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads
@@ -274,6 +276,9 @@
image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
image-$(CONFIG_PPC_C2K) += cuImage.c2k
+# Board port in arch/powerpc/platform/amigaone/Kconfig
+image-$(CONFIG_AMIGAONE) += cuImage.amigaone
+
# For 32-bit powermacs, build the COFF and miboot images
# as well as the ELF images.
ifeq ($(CONFIG_PPC32),y)
diff --git a/arch/powerpc/boot/cuboot-amigaone.c b/arch/powerpc/boot/cuboot-amigaone.c
new file mode 100644
index 0000000..d502967
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-amigaone.c
@@ -0,0 +1,35 @@
+/*
+ * Old U-boot compatibility for AmigaOne
+ *
+ * Author: Gerhard Pircher (gerhard_pircher@gmx.net)
+ *
+ * Based on cuboot-83xx.c
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "cuboot.h"
+
+#include "ppcboot.h"
+
+static bd_t bd;
+
+static void platform_fixups(void)
+{
+ dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+ dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ CUBOOT_INIT();
+ fdt_init(_dtb_start);
+ serial_console_init();
+ platform_ops.fixups = platform_fixups;
+}
diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts
new file mode 100644
index 0000000..26549fc
--- /dev/null
+++ b/arch/powerpc/boot/dts/amigaone.dts
@@ -0,0 +1,173 @@
+/*
+ * AmigaOne Device Tree Source
+ *
+ * Copyright 2008 Gerhard Pircher (gerhard_pircher@gmx.net)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "AmigaOne";
+ compatible = "eyetech,amigaone";
+ coherency-off;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <32768>; // L1, 32K
+ i-cache-size = <32768>; // L1, 32K
+ timebase-frequency = <0>; // 33.3 MHz, from U-boot
+ clock-frequency = <0>; // From U-boot
+ bus-frequency = <0>; // From U-boot
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0>; // From U-boot
+ };
+
+ pci@80000000 {
+ device_type = "pci";
+ compatible = "mai-logic,articia-s";
+ bus-frequency = <33333333>;
+ bus-range = <0 0xff>;
+ ranges = <0x01000000 0 0x00000000 0xfe000000 0 0x00c00000 // PCI I/O
+ 0x02000000 0 0x80000000 0x80000000 0 0x7d000000 // PCI memory
+ 0x02000000 0 0x00000000 0xfd000000 0 0x01000000>; // PCI alias memory (ISA)
+ // Configuration address and data register.
+ reg = <0xfec00cf8 4
+ 0xfee00cfc 4>;
+ 8259-interrupt-acknowledge = <0xfef00000>;
+ // Do not define a interrupt-parent here, if there is no
+ // interrupt-map property.
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ isa@7 {
+ device_type = "isa";
+ compatible = "pciclass,0601";
+ vendor-id = <0x00001106>;
+ device-id = <0x00000686>;
+ revision-id = <0x00000010>;
+ class-code = <0x00060100>;
+ subsystem-id = <0>;
+ subsystem-vendor-id = <0>;
+ devsel-speed = <0x00000001>;
+ min-grant = <0>;
+ max-latency = <0>;
+ /* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
+ ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>;
+ interrupt-parent = <&i8259>;
+ #interrupt-cells = <2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ dma-controller@0 {
+ compatible = "pnpPNP,200";
+ reg = <1 0x00000000 0x00000020
+ 1 0x00000080 0x00000010
+ 1 0x000000c0 0x00000020>;
+ };
+
+ i8259: interrupt-controller@20 {
+ device_type = "interrupt-controller";
+ compatible = "pnpPNP,000";
+ interrupt-controller;
+ reg = <1 0x00000020 0x00000002
+ 1 0x000000a0 0x00000002
+ 1 0x000004d0 0x00000002>;
+ reserved-interrupts = <2>;
+ #interrupt-cells = <2>;
+ };
+
+ timer@40 {
+ // Also adds pcspkr to platform devices.
+ compatible = "pnpPNP,100";
+ reg = <1 0x00000040 0x00000020>;
+ };
+
+ 8042@60 {
+ device_type = "8042";
+ reg = <1 0x00000060 0x00000001
+ 1 0x00000064 0x00000001>;
+ interrupts = <1 3 12 3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ keyboard@0 {
+ compatible = "pnpPNP,303";
+ reg = <0>;
+ };
+
+ mouse@1 {
+ compatible = "pnpPNP,f03";
+ reg = <1>;
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <1 0x00000070 0x00000002>;
+ interrupts = <8 3>;
+ };
+
+ serial@3f8 {
+ device_type = "serial";
+ compatible = "pnpPNP,501","pnpPNP,500";
+ reg = <1 0x000003f8 0x00000008>;
+ interrupts = <4 3>;
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ };
+
+ serial@2f8 {
+ device_type = "serial";
+ compatible = "pnpPNP,501","pnpPNP,500";
+ reg = <1 0x000002f8 0x00000008>;
+ interrupts = <3 3>;
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ };
+
+ parallel@378 {
+ device_type = "parallel";
+ // No ECP support for now, otherwise add "pnpPNP,401".
+ compatible = "pnpPNP,400";
+ reg = <1 0x00000378 0x00000003
+ 1 0x00000778 0x00000003>;
+ };
+
+ fdc@3f0 {
+ device_type = "fdc";
+ compatible = "pnpPNP,700";
+ reg = <1 0x000003f0 0x00000008>;
+ interrupts = <6 3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ disk@0 {
+ reg = <0>;
+ };
+ };
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/pci@80000000/isa@7/serial@3f8";
+ };
+};
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
index 524af7e..7da84fd 100644
--- a/arch/powerpc/boot/dts/asp834x-redboot.dts
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -181,70 +181,76 @@
phy_type = "ulpi";
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 08 e5 11 32 33 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
linux,network-index = <0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 08 e5 11 32 34 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
linux,network-index = <1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index 4447def..5fd1ad0 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -149,6 +149,20 @@
/*RXDE*/ 0x5 0x4>;
};
+ USB0: ehci@bffd0400 {
+ compatible = "ibm,usb-ehci-460ex", "usb-ehci";
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x1d 4>;
+ reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
+ };
+
+ USB1: usb@bffd0000 {
+ compatible = "ohci-le";
+ reg = <4 0xbffd0000 0x60>;
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x1e 4>;
+ };
+
POB0: opb {
compatible = "ibm,opb-460ex", "ibm,opb";
#address-cells = <1>;
@@ -252,6 +266,20 @@
reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x2 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rtc@68 {
+ compatible = "stm,m41t80";
+ reg = <0x68>;
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x19 0x8>;
+ };
+ sttm@48 {
+ compatible = "ad,ad7414";
+ reg = <0x48>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x14 0x8>;
+ };
};
IIC1: i2c@ef600800 {
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index 2f74cc4..cee8080 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -17,6 +17,7 @@
compatible = "schindler,cm5200";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
@@ -66,7 +67,6 @@
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x600 0x10>;
interrupts = <1 9 0>;
- interrupt-parent = <&mpc5200_pic>;
fsl,has-wdt;
};
@@ -74,84 +74,76 @@
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x610 0x10>;
interrupts = <1 10 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@620 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x620 0x10>;
interrupts = <1 11 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@630 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x630 0x10>;
interrupts = <1 12 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@640 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x640 0x10>;
interrupts = <1 13 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@650 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x650 0x10>;
interrupts = <1 14 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@660 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x660 0x10>;
interrupts = <1 15 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@670 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x670 0x10>;
interrupts = <1 16 0>;
- interrupt-parent = <&mpc5200_pic>;
};
rtc@800 { // Real time clock
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
reg = <0x800 0x100>;
interrupts = <1 5 0 1 6 0>;
- interrupt-parent = <&mpc5200_pic>;
};
- gpio@b00 {
+ gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
- interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
- gpio@c00 {
+ gpio_wkup: gpio@c00 {
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
- interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
spi@f00 {
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
- interrupt-parent = <&mpc5200_pic>;
};
usb@1000 {
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
interrupts = <2 6 0>;
- interrupt-parent = <&mpc5200_pic>;
};
dma-controller@1200 {
@@ -161,7 +153,6 @@
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
- interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
@@ -170,48 +161,34 @@
};
serial@2000 { // PSC1
- device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- port-number = <0>; // Logical port assignment
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
- interrupt-parent = <&mpc5200_pic>;
};
serial@2200 { // PSC2
- device_type = "serial";
- compatible = "fsl,mpc5200-psc-uart";
- port-number = <1>; // Logical port assignment
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2200 0x100>;
interrupts = <2 2 0>;
- interrupt-parent = <&mpc5200_pic>;
};
serial@2400 { // PSC3
- device_type = "serial";
- compatible = "fsl,mpc5200-psc-uart";
- port-number = <2>; // Logical port assignment
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2400 0x100>;
interrupts = <2 3 0>;
- interrupt-parent = <&mpc5200_pic>;
};
serial@2c00 { // PSC6
- device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- port-number = <5>; // Logical port assignment
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
- interrupt-parent = <&mpc5200_pic>;
};
ethernet@3000 {
- device_type = "network";
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
- interrupt-parent = <&mpc5200_pic>;
phy-handle = <&phy0>;
};
@@ -221,10 +198,8 @@
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
- interrupt-parent = <&mpc5200_pic>;
phy0: ethernet-phy@0 {
- device_type = "ethernet-phy";
reg = <0>;
};
};
@@ -235,7 +210,6 @@
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
@@ -245,9 +219,8 @@
};
};
- lpb {
- model = "fsl,lpb";
- compatible = "fsl,lpb";
+ localbus {
+ compatible = "fsl,mpc5200b-lpb","simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0xfc000000 0x2000000>;
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
new file mode 100644
index 0000000..4c36186
--- /dev/null
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -0,0 +1,254 @@
+/*
+ * Digsy MTC board Device Tree Source
+ *
+ * Copyright (C) 2009 Semihalf
+ *
+ * Based on the CM5200 by M. Balakowicz
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "intercontrol,digsy-mtc";
+ compatible = "intercontrol,digsy-mtc";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>; // 32MB
+ };
+
+ soc5200@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200b-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ timer@600 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x600 0x10>;
+ interrupts = <1 9 0>;
+ fsl,has-wdt;
+ };
+
+ timer@610 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x610 0x10>;
+ interrupts = <1 10 0>;
+ };
+
+ timer@620 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x620 0x10>;
+ interrupts = <1 11 0>;
+ };
+
+ timer@630 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x630 0x10>;
+ interrupts = <1 12 0>;
+ };
+
+ timer@640 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x640 0x10>;
+ interrupts = <1 13 0>;
+ };
+
+ timer@650 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x650 0x10>;
+ interrupts = <1 14 0>;
+ };
+
+ timer@660 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x660 0x10>;
+ interrupts = <1 15 0>;
+ };
+
+ timer@670 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x670 0x10>;
+ interrupts = <1 16 0>;
+ };
+
+ gpio_simple: gpio@b00 {
+ compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_wkup: gpio@c00 {
+ compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+ reg = <0xc00 0x40>;
+ interrupts = <1 8 0 0 3 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ spi@f00 {
+ compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+ reg = <0xf00 0x20>;
+ interrupts = <2 13 0 2 14 0>;
+ };
+
+ usb@1000 {
+ compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+ reg = <0x1000 0xff>;
+ interrupts = <2 6 0>;
+ };
+
+ dma-controller@1200 {
+ compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ };
+
+ xlb@1f00 {
+ compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ serial@2600 { // PSC4
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2600 0x100>;
+ interrupts = <2 11 0>;
+ };
+
+ serial@2800 { // PSC5
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2800 0x100>;
+ interrupts = <2 12 0>;
+ };
+
+ ethernet@3000 {
+ compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ ata@3a00 {
+ compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ };
+
+ i2c@3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ fsl5200-clocking;
+
+ rtc@50 {
+ compatible = "at,24c08";
+ reg = <0x50>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ sram@8000 {
+ compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
+ lpb {
+ compatible = "fsl,mpc5200b-lpb","simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0xff000000 0x1000000>;
+
+ // 16-bit flash device at LocalPlus Bus CS0
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x1000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x00200000>;
+ };
+ partition@200000 {
+ label = "root";
+ reg = <0x00200000 0x00300000>;
+ };
+ partition@500000 {
+ label = "user";
+ reg = <0x00500000 0x00a00000>;
+ };
+ partition@f00000 {
+ label = "u-boot";
+ reg = <0x00f00000 0x100000>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
new file mode 100644
index 0000000..d47ad07
--- /dev/null
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -0,0 +1,367 @@
+/*
+ * GE Fanuc PPC9A Device Tree Source
+ *
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts
+ */
+
+/dts-v1/;
+
+/ {
+ model = "GEF_PPC9A";
+ compatible = "gef,ppc9a";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8641@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <32768>; // L1, 32K
+ i-cache-size = <32768>; // L1, 32K
+ timebase-frequency = <0>; // From uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ };
+ PowerPC,8641@1 {
+ device_type = "cpu";
+ reg = <1>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <32768>; // L1, 32K
+ i-cache-size = <32768>; // L1, 32K
+ timebase-frequency = <0>; // From uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000>; // set by uboot
+ };
+
+ localbus@fef05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-localbus", "simple-bus";
+ reg = <0xfef05000 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
+ 1 0 0xe8000000 0x08000000 // Paged Flash 0
+ 2 0 0xe0000000 0x08000000 // Paged Flash 1
+ 3 0 0xfc100000 0x00020000 // NVRAM
+ 4 0 0xfc000000 0x00008000 // FPGA
+ 5 0 0xfc008000 0x00008000 // AFIX FPGA
+ 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit)
+ 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit)
+
+ /* flash@0,0 is a mirror of part of the memory in flash@1,0
+ flash@0,0 {
+ compatible = "gef,ppc9a-firmware-mirror", "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "firmware";
+ reg = <0x0 0x1000000>;
+ read-only;
+ };
+ };
+ */
+
+ flash@1,0 {
+ compatible = "gef,ppc9a-paged-flash", "cfi-flash";
+ reg = <0x1 0x0 0x8000000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "user";
+ reg = <0x0 0x7800000>;
+ };
+ partition@7800000 {
+ label = "firmware";
+ reg = <0x7800000 0x800000>;
+ read-only;
+ };
+ };
+
+ fpga@4,0 {
+ compatible = "gef,ppc9a-fpga-regs";
+ reg = <0x4 0x0 0x40>;
+ };
+
+ wdt@4,2000 {
+ compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
+ "gef,fpga-wdt";
+ reg = <0x4 0x2000 0x8>;
+ interrupts = <0x1a 0x4>;
+ interrupt-parent = <&gef_pic>;
+ };
+ /* Second watchdog available, driver currently supports one.
+ wdt@4,2010 {
+ compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
+ "gef,fpga-wdt";
+ reg = <0x4 0x2010 0x8>;
+ interrupts = <0x1b 0x4>;
+ interrupt-parent = <&gef_pic>;
+ };
+ */
+ gef_pic: pic@4,4000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00";
+ reg = <0x4 0x4000 0x20>;
+ interrupts = <0x8
+ 0x9>;
+ interrupt-parent = <&mpic>;
+
+ };
+ gef_gpio: gpio@7,14000 {
+ #gpio-cells = <2>;
+ compatible = "gef,ppc9a-gpio", "gef,sbc610-gpio";
+ reg = <0x7 0x14000 0x24>;
+ gpio-controller;
+ };
+ };
+
+ soc@fef00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ compatible = "fsl,mpc8641-soc", "simple-bus";
+ ranges = <0x0 0xfef00000 0x00100000>;
+ reg = <0xfef00000 0x100000>; // CCSRBAR 1M
+ bus-frequency = <33333333>;
+
+ i2c1: i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <0x2b 0x2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+
+ hwmon@48 {
+ compatible = "national,lm92";
+ reg = <0x48>;
+ };
+
+ hwmon@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+
+ rtc@51 {
+ compatible = "epson,rx8581";
+ reg = <0x00000051>;
+ };
+
+ eti@6b {
+ compatible = "dallas,ds1682";
+ reg = <0x6b>;
+ };
+ };
+
+ i2c2: i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <0x2b 0x2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "gmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x9 0x4>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x8 0x4>;
+ reg = <3>;
+ };
+ };
+ };
+
+ enet1: ethernet@26000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "gmii";
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <0x2a 0x2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <0x1c 0x2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ mpic: pic@40000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8641-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+ };
+
+ pci0: pcie@fef08000 {
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xfef08000 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+ 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <0x18 0x2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0x80000000
+ 0x02000000 0x0 0x80000000
+ 0x0 0x40000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00400000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
new file mode 100644
index 0000000..1569117
--- /dev/null
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -0,0 +1,367 @@
+/*
+ * GE Fanuc SBC310 Device Tree Source
+ *
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts
+ */
+
+/dts-v1/;
+
+/ {
+ model = "GEF_SBC310";
+ compatible = "gef,sbc310";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8641@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <32768>; // L1, 32K
+ i-cache-size = <32768>; // L1, 32K
+ timebase-frequency = <0>; // From uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ };
+ PowerPC,8641@1 {
+ device_type = "cpu";
+ reg = <1>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <32768>; // L1, 32K
+ i-cache-size = <32768>; // L1, 32K
+ timebase-frequency = <0>; // From uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000>; // set by uboot
+ };
+
+ localbus@fef05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-localbus", "simple-bus";
+ reg = <0xfef05000 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
+ 1 0 0xe0000000 0x08000000 // Paged Flash 0
+ 2 0 0xe8000000 0x08000000 // Paged Flash 1
+ 3 0 0xfc100000 0x00020000 // NVRAM
+ 4 0 0xfc000000 0x00010000>; // FPGA
+
+ /* flash@0,0 is a mirror of part of the memory in flash@1,0
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x01000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "firmware";
+ reg = <0x00000000 0x01000000>;
+ read-only;
+ };
+ };
+ */
+
+ flash@1,0 {
+ compatible = "cfi-flash";
+ reg = <1 0 0x8000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "user";
+ reg = <0x00000000 0x07800000>;
+ };
+ partition@7800000 {
+ label = "firmware";
+ reg = <0x07800000 0x00800000>;
+ read-only;
+ };
+ };
+
+ fpga@4,0 {
+ compatible = "gef,fpga-regs";
+ reg = <0x4 0x0 0x40>;
+ };
+
+ wdt@4,2000 {
+ #interrupt-cells = <2>;
+ device_type = "watchdog";
+ compatible = "gef,fpga-wdt";
+ reg = <0x4 0x2000 0x8>;
+ interrupts = <0x1a 0x4>;
+ interrupt-parent = <&gef_pic>;
+ };
+/*
+ wdt@4,2010 {
+ #interrupt-cells = <2>;
+ device_type = "watchdog";
+ compatible = "gef,fpga-wdt";
+ reg = <0x4 0x2010 0x8>;
+ interrupts = <0x1b 0x4>;
+ interrupt-parent = <&gef_pic>;
+ };
+*/
+ gef_pic: pic@4,4000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "gef,fpga-pic";
+ reg = <0x4 0x4000 0x20>;
+ interrupts = <0x8
+ 0x9>;
+ interrupt-parent = <&mpic>;
+
+ };
+ gef_gpio: gpio@4,8000 {
+ #gpio-cells = <2>;
+ compatible = "gef,sbc310-gpio";
+ reg = <0x4 0x8000 0x24>;
+ gpio-controller;
+ };
+ };
+
+ soc@fef00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x0 0xfef00000 0x00100000>;
+ reg = <0xfef00000 0x100000>; // CCSRBAR 1M
+ bus-frequency = <33333333>;
+
+ i2c1: i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <0x2b 0x2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+
+ rtc@51 {
+ compatible = "epson,rx8581";
+ reg = <0x00000051>;
+ };
+ };
+
+ i2c2: i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <0x2b 0x2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+
+ hwmon@48 {
+ compatible = "national,lm92";
+ reg = <0x48>;
+ };
+
+ hwmon@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+
+ eti@6b {
+ compatible = "dallas,ds1682";
+ reg = <0x6b>;
+ };
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "gmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x9 0x4>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x8 0x4>;
+ reg = <3>;
+ };
+ };
+ };
+
+ enet1: ethernet@26000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "gmii";
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <0x2a 0x2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <0x1c 0x2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ mpic: pic@40000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8641-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+ };
+
+ pci0: pcie@fef08000 {
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xfef08000 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+ 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <0x18 0x2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0000 0x0 0x0 0x1 &mpic 0x0 0x2
+ 0x0000 0x0 0x0 0x2 &mpic 0x1 0x2
+ 0x0000 0x0 0x0 0x3 &mpic 0x2 0x2
+ 0x0000 0x0 0x0 0x4 &mpic 0x3 0x2
+ >;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0x80000000
+ 0x02000000 0x0 0x80000000
+ 0x0 0x40000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00400000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index e78c355..6582dbd 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -71,7 +71,7 @@
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
- reg = <0xf8005000 0x1000>;
+ reg = <0xfef05000 0x1000>;
interrupts = <19 2>;
interrupt-parent = <&mpic>;
@@ -202,34 +202,37 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x9 0x4>;
- reg = <1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x8 0x4>;
- reg = <3>;
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x9 0x4>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x8 0x4>;
+ reg = <3>;
+ };
+ };
};
enet1: ethernet@26000 {
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
index 3bfff47..308fe7c 100644
--- a/arch/powerpc/boot/dts/ksi8560.dts
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -124,67 +124,72 @@
};
};
- mdio@24520 { /* For TSECs */
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- PHY1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
-
- PHY2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
/* Mac address filled in by bootwrapper */
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&PHY1>;
+
+ mdio@520 { /* For TSECs */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ PHY1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ PHY2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
/* Mac address filled in by bootwrapper */
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&PHY2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
mpic: pic@40000 {
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 3f7a5dc..de30b3f9 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -17,6 +17,7 @@
compatible = "fsl,lite5200";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
@@ -58,96 +59,74 @@
// 5200 interrupts are encoded into two levels;
interrupt-controller;
#interrupt-cells = <3>;
- device_type = "interrupt-controller";
compatible = "fsl,mpc5200-pic";
reg = <0x500 0x80>;
};
timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
- cell-index = <0>;
reg = <0x600 0x10>;
interrupts = <1 9 0>;
- interrupt-parent = <&mpc5200_pic>;
fsl,has-wdt;
};
timer@610 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
- cell-index = <1>;
reg = <0x610 0x10>;
interrupts = <1 10 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@620 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
- cell-index = <2>;
reg = <0x620 0x10>;
interrupts = <1 11 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@630 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
- cell-index = <3>;
reg = <0x630 0x10>;
interrupts = <1 12 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@640 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
- cell-index = <4>;
reg = <0x640 0x10>;
interrupts = <1 13 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@650 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
- cell-index = <5>;
reg = <0x650 0x10>;
interrupts = <1 14 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@660 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
- cell-index = <6>;
reg = <0x660 0x10>;
interrupts = <1 15 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@670 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
- cell-index = <7>;
reg = <0x670 0x10>;
interrupts = <1 16 0>;
- interrupt-parent = <&mpc5200_pic>;
};
rtc@800 { // Real time clock
compatible = "fsl,mpc5200-rtc";
reg = <0x800 0x100>;
interrupts = <1 5 0 1 6 0>;
- interrupt-parent = <&mpc5200_pic>;
};
can@900 {
compatible = "fsl,mpc5200-mscan";
- cell-index = <0>;
interrupts = <2 17 0>;
- interrupt-parent = <&mpc5200_pic>;
reg = <0x900 0x80>;
};
can@980 {
compatible = "fsl,mpc5200-mscan";
- cell-index = <1>;
interrupts = <2 18 0>;
- interrupt-parent = <&mpc5200_pic>;
reg = <0x980 0x80>;
};
@@ -155,39 +134,33 @@
compatible = "fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
- interrupt-parent = <&mpc5200_pic>;
};
gpio@c00 {
compatible = "fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
- interrupt-parent = <&mpc5200_pic>;
};
spi@f00 {
compatible = "fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
- interrupt-parent = <&mpc5200_pic>;
};
usb@1000 {
compatible = "fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
interrupts = <2 6 0>;
- interrupt-parent = <&mpc5200_pic>;
};
dma-controller@1200 {
- device_type = "dma-controller";
compatible = "fsl,mpc5200-bestcomm";
reg = <0x1200 0x80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
- interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
@@ -196,13 +169,10 @@
};
serial@2000 { // PSC1
- device_type = "serial";
compatible = "fsl,mpc5200-psc-uart";
- port-number = <0>; // Logical port assignment
cell-index = <0>;
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
- interrupt-parent = <&mpc5200_pic>;
};
// PSC2 in ac97 mode example
@@ -211,7 +181,6 @@
// cell-index = <1>;
// reg = <0x2200 0x100>;
// interrupts = <2 2 0>;
- // interrupt-parent = <&mpc5200_pic>;
//};
// PSC3 in CODEC mode example
@@ -220,27 +189,22 @@
// cell-index = <2>;
// reg = <0x2400 0x100>;
// interrupts = <2 3 0>;
- // interrupt-parent = <&mpc5200_pic>;
//};
// PSC4 in uart mode example
//serial@2600 { // PSC4
- // device_type = "serial";
// compatible = "fsl,mpc5200-psc-uart";
// cell-index = <3>;
// reg = <0x2600 0x100>;
// interrupts = <2 11 0>;
- // interrupt-parent = <&mpc5200_pic>;
//};
// PSC5 in uart mode example
//serial@2800 { // PSC5
- // device_type = "serial";
// compatible = "fsl,mpc5200-psc-uart";
// cell-index = <4>;
// reg = <0x2800 0x100>;
// interrupts = <2 12 0>;
- // interrupt-parent = <&mpc5200_pic>;
//};
// PSC6 in spi mode example
@@ -249,16 +213,13 @@
// cell-index = <5>;
// reg = <0x2c00 0x100>;
// interrupts = <2 4 0>;
- // interrupt-parent = <&mpc5200_pic>;
//};
ethernet@3000 {
- device_type = "network";
compatible = "fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
- interrupt-parent = <&mpc5200_pic>;
phy-handle = <&phy0>;
};
@@ -268,30 +229,24 @@
compatible = "fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
- interrupt-parent = <&mpc5200_pic>;
phy0: ethernet-phy@1 {
- device_type = "ethernet-phy";
reg = <1>;
};
};
ata@3a00 {
- device_type = "ata";
compatible = "fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
interrupts = <2 7 0>;
- interrupt-parent = <&mpc5200_pic>;
};
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200-i2c","fsl-i2c";
- cell-index = <0>;
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
- interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
@@ -299,14 +254,12 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200-i2c","fsl-i2c";
- cell-index = <1>;
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
sram@8000 {
- compatible = "fsl,mpc5200-sram","sram";
+ compatible = "fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
};
};
@@ -325,7 +278,6 @@
0xc000 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 10 0>;
- interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 63e3bb4..c63e356 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -17,6 +17,7 @@
compatible = "fsl,lite5200b";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
@@ -58,136 +59,112 @@
// 5200 interrupts are encoded into two levels;
interrupt-controller;
#interrupt-cells = <3>;
- device_type = "interrupt-controller";
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
reg = <0x500 0x80>;
};
timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- cell-index = <0>;
reg = <0x600 0x10>;
interrupts = <1 9 0>;
- interrupt-parent = <&mpc5200_pic>;
fsl,has-wdt;
};
timer@610 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- cell-index = <1>;
reg = <0x610 0x10>;
interrupts = <1 10 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@620 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- cell-index = <2>;
reg = <0x620 0x10>;
interrupts = <1 11 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@630 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- cell-index = <3>;
reg = <0x630 0x10>;
interrupts = <1 12 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@640 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- cell-index = <4>;
reg = <0x640 0x10>;
interrupts = <1 13 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@650 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- cell-index = <5>;
reg = <0x650 0x10>;
interrupts = <1 14 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@660 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- cell-index = <6>;
reg = <0x660 0x10>;
interrupts = <1 15 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@670 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- cell-index = <7>;
reg = <0x670 0x10>;
interrupts = <1 16 0>;
- interrupt-parent = <&mpc5200_pic>;
};
rtc@800 { // Real time clock
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
reg = <0x800 0x100>;
interrupts = <1 5 0 1 6 0>;
- interrupt-parent = <&mpc5200_pic>;
};
can@900 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
- cell-index = <0>;
interrupts = <2 17 0>;
- interrupt-parent = <&mpc5200_pic>;
reg = <0x900 0x80>;
};
can@980 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
- cell-index = <1>;
interrupts = <2 18 0>;
- interrupt-parent = <&mpc5200_pic>;
reg = <0x980 0x80>;
};
- gpio@b00 {
+ gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
- interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
- gpio@c00 {
+ gpio_wkup: gpio@c00 {
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
- interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
spi@f00 {
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
- interrupt-parent = <&mpc5200_pic>;
};
usb@1000 {
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
interrupts = <2 6 0>;
- interrupt-parent = <&mpc5200_pic>;
};
dma-controller@1200 {
- device_type = "dma-controller";
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
reg = <0x1200 0x80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
- interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
@@ -196,13 +173,10 @@
};
serial@2000 { // PSC1
- device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- port-number = <0>; // Logical port assignment
cell-index = <0>;
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
- interrupt-parent = <&mpc5200_pic>;
};
// PSC2 in ac97 mode example
@@ -211,7 +185,6 @@
// cell-index = <1>;
// reg = <0x2200 0x100>;
// interrupts = <2 2 0>;
- // interrupt-parent = <&mpc5200_pic>;
//};
// PSC3 in CODEC mode example
@@ -220,27 +193,22 @@
// cell-index = <2>;
// reg = <0x2400 0x100>;
// interrupts = <2 3 0>;
- // interrupt-parent = <&mpc5200_pic>;
//};
// PSC4 in uart mode example
//serial@2600 { // PSC4
- // device_type = "serial";
// compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
// cell-index = <3>;
// reg = <0x2600 0x100>;
// interrupts = <2 11 0>;
- // interrupt-parent = <&mpc5200_pic>;
//};
// PSC5 in uart mode example
//serial@2800 { // PSC5
- // device_type = "serial";
// compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
// cell-index = <4>;
// reg = <0x2800 0x100>;
// interrupts = <2 12 0>;
- // interrupt-parent = <&mpc5200_pic>;
//};
// PSC6 in spi mode example
@@ -249,49 +217,40 @@
// cell-index = <5>;
// reg = <0x2c00 0x100>;
// interrupts = <2 4 0>;
- // interrupt-parent = <&mpc5200_pic>;
//};
ethernet@3000 {
- device_type = "network";
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
- interrupt-parent = <&mpc5200_pic>;
phy-handle = <&phy0>;
};
mdio@3000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio";
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
- interrupt-parent = <&mpc5200_pic>;
phy0: ethernet-phy@0 {
- device_type = "ethernet-phy";
reg = <0>;
};
};
ata@3a00 {
- device_type = "ata";
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
interrupts = <2 7 0>;
- interrupt-parent = <&mpc5200_pic>;
};
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- cell-index = <0>;
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
- interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
@@ -299,14 +258,13 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- cell-index = <1>;
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
+
sram@8000 {
- compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram";
+ compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
};
};
@@ -330,7 +288,6 @@
0xc800 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 10 0>;
- interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
new file mode 100644
index 0000000..e297d8b
--- /dev/null
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -0,0 +1,318 @@
+/*
+ * Freescale Media5200 board Device Tree Source
+ *
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ * Steven Cavanagh <scavanagh@secretlab.ca>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "fsl,media5200";
+ compatible = "fsl,media5200";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ aliases {
+ console = &console;
+ ethernet0 = ð0;
+ };
+
+ chosen {
+ linux,stdout-path = &console;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot
+ bus-frequency = <132000000>; // 132 MHz
+ clock-frequency = <396000000>; // 396 MHz
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>; // 128MB RAM
+ };
+
+ soc@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200b-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <132000000>;// 132 MHz
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ timer@600 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x600 0x10>;
+ interrupts = <1 9 0>;
+ fsl,has-wdt;
+ };
+
+ timer@610 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x610 0x10>;
+ interrupts = <1 10 0>;
+ };
+
+ timer@620 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x620 0x10>;
+ interrupts = <1 11 0>;
+ };
+
+ timer@630 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x630 0x10>;
+ interrupts = <1 12 0>;
+ };
+
+ timer@640 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x640 0x10>;
+ interrupts = <1 13 0>;
+ };
+
+ timer@650 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x650 0x10>;
+ interrupts = <1 14 0>;
+ };
+
+ timer@660 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x660 0x10>;
+ interrupts = <1 15 0>;
+ };
+
+ timer@670 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x670 0x10>;
+ interrupts = <1 16 0>;
+ };
+
+ rtc@800 { // Real time clock
+ compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
+ reg = <0x800 0x100>;
+ interrupts = <1 5 0 1 6 0>;
+ };
+
+ can@900 {
+ compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+ interrupts = <2 17 0>;
+ reg = <0x900 0x80>;
+ };
+
+ can@980 {
+ compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+ interrupts = <2 18 0>;
+ reg = <0x980 0x80>;
+ };
+
+ gpio_simple: gpio@b00 {
+ compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_wkup: gpio@c00 {
+ compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+ reg = <0xc00 0x40>;
+ interrupts = <1 8 0 0 3 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ spi@f00 {
+ compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+ reg = <0xf00 0x20>;
+ interrupts = <2 13 0 2 14 0>;
+ };
+
+ usb@1000 {
+ compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+ reg = <0x1000 0x100>;
+ interrupts = <2 6 0>;
+ };
+
+ dma-controller@1200 {
+ compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ };
+
+ xlb@1f00 {
+ compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ // PSC6 in uart mode
+ console: serial@2c00 { // PSC6
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ cell-index = <5>;
+ port-number = <0>; // Logical port assignment
+ reg = <0x2c00 0x100>;
+ interrupts = <2 4 0>;
+ };
+
+ eth0: ethernet@3000 {
+ compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ ata@3a00 {
+ compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ };
+
+ i2c@3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ fsl5200-clocking;
+ };
+
+ i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d40 0x40>;
+ interrupts = <2 16 0>;
+ fsl5200-clocking;
+ };
+
+ sram@8000 {
+ compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
+ pci@f0000d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+ reg = <0xf0000d00 0x100>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
+ 0xc000 0 0 2 &media5200_fpga 0 3
+ 0xc000 0 0 3 &media5200_fpga 0 4
+ 0xc000 0 0 4 &media5200_fpga 0 5
+
+ 0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot
+ 0xc800 0 0 2 &media5200_fpga 0 4
+ 0xc800 0 0 3 &media5200_fpga 0 5
+ 0xc800 0 0 4 &media5200_fpga 0 2
+
+ 0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI
+ 0xd000 0 0 2 &media5200_fpga 0 5
+
+ 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
+ >;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 10 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
+ 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+ };
+
+ localbus {
+ compatible = "fsl,mpc5200b-lpb","simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = < 0 0 0xfc000000 0x02000000
+ 1 0 0xfe000000 0x02000000
+ 2 0 0xf0010000 0x00010000
+ 3 0 0xf0020000 0x00010000 >;
+
+ flash@0,0 {
+ compatible = "amd,am29lv28ml", "cfi-flash";
+ reg = <0 0x0 0x2000000>; // 32 MB
+ bank-width = <4>; // Width in bytes of the flash bank
+ device-width = <2>; // Two devices on each bank
+ };
+
+ flash@1,0 {
+ compatible = "amd,am29lv28ml", "cfi-flash";
+ reg = <1 0 0x2000000>; // 32 MB
+ bank-width = <4>; // Width in bytes of the flash bank
+ device-width = <2>; // Two devices on each bank
+ };
+
+ media5200_fpga: fpga@2,0 {
+ compatible = "fsl,media5200-fpga";
+ interrupt-controller;
+ #interrupt-cells = <2>; // 0:bank 1:id; no type field
+ reg = <2 0 0x10000>;
+
+ interrupt-parent = <&mpc5200_pic>;
+ interrupts = <0 0 3 // IRQ bank 0
+ 1 1 3>; // IRQ bank 1
+ };
+
+ uart@3,0 {
+ compatible = "ti,tl16c752bpt";
+ reg = <3 0 0x10000>;
+ interrupt-parent = <&media5200_fpga>;
+ interrupts = <0 0 0 1>; // 2 irqs
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 52ba6f9..7be8ca0 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -17,6 +17,7 @@
compatible = "promess,motionpro";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
@@ -66,7 +67,6 @@
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x600 0x10>;
interrupts = <1 9 0>;
- interrupt-parent = <&mpc5200_pic>;
fsl,has-wdt;
};
@@ -74,35 +74,30 @@
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x610 0x10>;
interrupts = <1 10 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@620 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x620 0x10>;
interrupts = <1 11 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@630 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x630 0x10>;
interrupts = <1 12 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@640 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x640 0x10>;
interrupts = <1 13 0>;
- interrupt-parent = <&mpc5200_pic>;
};
timer@650 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x650 0x10>;
interrupts = <1 14 0>;
- interrupt-parent = <&mpc5200_pic>;
};
motionpro-led@660 { // Motion-PRO status LED
@@ -110,7 +105,6 @@
label = "motionpro-statusled";
reg = <0x660 0x10>;
interrupts = <1 15 0>;
- interrupt-parent = <&mpc5200_pic>;
blink-delay = <100>; // 100 msec
};
@@ -119,49 +113,46 @@
label = "motionpro-readyled";
reg = <0x670 0x10>;
interrupts = <1 16 0>;
- interrupt-parent = <&mpc5200_pic>;
};
rtc@800 { // Real time clock
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
reg = <0x800 0x100>;
interrupts = <1 5 0 1 6 0>;
- interrupt-parent = <&mpc5200_pic>;
};
can@980 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
interrupts = <2 18 0>;
- interrupt-parent = <&mpc5200_pic>;
reg = <0x980 0x80>;
};
- gpio@b00 {
+ gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
- interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
- gpio@c00 {
+ gpio_wkup: gpio@c00 {
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
- interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
spi@f00 {
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
- interrupt-parent = <&mpc5200_pic>;
};
usb@1000 {
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
interrupts = <2 6 0>;
- interrupt-parent = <&mpc5200_pic>;
};
dma-controller@1200 {
@@ -171,7 +162,6 @@
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
- interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
@@ -180,12 +170,9 @@
};
serial@2000 { // PSC1
- device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- port-number = <0>; // Logical port assignment
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
- interrupt-parent = <&mpc5200_pic>;
};
// PSC2 in spi master mode
@@ -194,26 +181,20 @@
cell-index = <1>;
reg = <0x2200 0x100>;
interrupts = <2 2 0>;
- interrupt-parent = <&mpc5200_pic>;
};
// PSC5 in uart mode
serial@2800 { // PSC5
- device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- port-number = <4>; // Logical port assignment
reg = <0x2800 0x100>;
interrupts = <2 12 0>;
- interrupt-parent = <&mpc5200_pic>;
};
ethernet@3000 {
- device_type = "network";
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
- interrupt-parent = <&mpc5200_pic>;
phy-handle = <&phy0>;
};
@@ -223,10 +204,8 @@
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
- interrupt-parent = <&mpc5200_pic>;
phy0: ethernet-phy@2 {
- device_type = "ethernet-phy";
reg = <2>;
};
};
@@ -235,7 +214,6 @@
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
interrupts = <2 7 0>;
- interrupt-parent = <&mpc5200_pic>;
};
i2c@3d40 {
@@ -244,7 +222,6 @@
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
rtc@68 {
@@ -259,8 +236,8 @@
};
};
- lpb {
- compatible = "fsl,lpb";
+ localbus {
+ compatible = "fsl,mpc5200b-lpb","simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0xff000000 0x01000000
@@ -273,7 +250,6 @@
compatible = "promess,motionpro-kollmorgen";
reg = <1 0 0x10000>;
interrupts = <1 1 0>;
- interrupt-parent = <&mpc5200_pic>;
};
// 8-bit board CPLD on LocalPlus Bus CS2
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index 3ebf7ec..761faa7 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -180,7 +180,7 @@
#address-cells = <1>;
#size-cells = <1>;
sleep = <&pmc 0x20000000>;
- ranges;
+ ranges = <0x0 0x24000 0x1000>;
cell-index = <0>;
device_type = "network";
@@ -195,11 +195,11 @@
fixed-link = <1 1 1000 0 0>;
fsl,magic-packet;
- mdio@24520 {
+ mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
+ reg = <0x520 0x20>;
phy4: ethernet-phy@4 {
interrupt-parent = <&ipic>;
interrupts = <20 0x8>;
@@ -221,6 +221,7 @@
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <34 0x8 33 0x8 32 0x8>;
interrupt-parent = <&ipic>;
@@ -229,11 +230,11 @@
sleep = <&pmc 0x10000000>;
fsl,magic-packet;
- mdio@25520 {
+ mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
+ reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index 7178416..3f4c5fb 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -22,6 +22,8 @@
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
};
cpus {
@@ -188,66 +190,74 @@
phy_type = "utmi";
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- phy0: ethernet-phy@0 {
- interrupt-parent = <&ipic>;
- interrupts = <20 0x8>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&ipic>;
- interrupts = <19 0x8>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = < &phy0 >;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&ipic>;
+ interrupts = <20 0x8>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&ipic>;
+ interrupts = <19 0x8>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = < &phy1 >;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
@@ -349,4 +359,66 @@
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
+
+ pci1: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe0009000 0x00001000>;
+ ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 1 8
+ 0 0 0 2 &ipic 1 8
+ 0 0 0 3 &ipic 1 8
+ 0 0 0 4 &ipic 1 8>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xa0000000
+ 0x02000000 0 0xa0000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+
+ pci2: pcie@e000a000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe000a000 0x00001000>;
+ ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 2 8
+ 0 0 0 2 &ipic 2 8
+ 0 0 0 3 &ipic 2 8
+ 0 0 0 4 &ipic 2 8>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xc0000000
+ 0x02000000 0 0xc0000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
};
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index b5eda94..1ae38f0 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -170,57 +170,52 @@
phy_type = "ulpi";
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- /* Vitesse 8201 */
- phy1c: ethernet-phy@1c {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x1c>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy1c>;
linux,network-index = <0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ /* Vitesse 8201 */
+ phy1c: ethernet-phy@1c {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x1c>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
@@ -228,6 +223,18 @@
fixed-link = <1 1 1000 0 0>;
linux,network-index = <1>;
tbi-handle = <&tbi1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index c87a601..662abe1 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -149,37 +149,41 @@
phy_type = "ulpi";
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- /* Vitesse 8201 */
- phy1c: ethernet-phy@1c {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x1c>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy1c>;
linux,network-index = <0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ /* Vitesse 8201 */
+ phy1c: ethernet-phy@1c {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x1c>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index d9adba0..d9f0a23 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -167,69 +167,76 @@
phy_type = "ulpi";
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
linux,network-index = <0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
linux,network-index = <1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 1d14d70..9637080 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -23,6 +23,8 @@
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
};
cpus {
@@ -127,21 +129,38 @@
reg = <0x200 0x100>;
};
- i2c@3000 {
+ sleep-nexus {
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x0c000000>;
+ ranges;
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- interrupts = <19 0x8>;
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
+ dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ interrupts = <19 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+ };
+
+ sdhci@2e000 {
+ compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
};
};
@@ -174,70 +193,83 @@
interrupts = <38 0x8>;
dr_mode = "host";
phy_type = "ulpi";
+ sleep = <&pmc 0x00c00000>;
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- phy2: ethernet-phy@2 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+ sleep = <&pmc 0xc0000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
+ sleep = <&pmc 0x30000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
@@ -309,14 +341,7 @@
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sdhc@2e000 {
- model = "eSDHC";
- compatible = "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <42 0x8>;
- interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x03000000>;
};
sata@18000 {
@@ -324,6 +349,7 @@
reg = <0x18000 0x1000>;
interrupts = <44 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x000000c0>;
};
sata@19000 {
@@ -331,6 +357,7 @@
reg = <0x19000 0x1000>;
interrupts = <45 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x00000030>;
};
/* IPIC
@@ -346,6 +373,13 @@
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
+
+ pmc: power@b00 {
+ compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
};
pci0: pci@e0008500 {
@@ -400,6 +434,7 @@
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+ sleep = <&pmc 0x00010000>;
clock-frequency = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
@@ -409,4 +444,68 @@
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
+
+ pci1: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe0009000 0x00001000>;
+ ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 1 8
+ 0 0 0 2 &ipic 1 8
+ 0 0 0 3 &ipic 1 8
+ 0 0 0 4 &ipic 1 8>;
+ sleep = <&pmc 0x00300000>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xa8000000
+ 0x02000000 0 0xa8000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+
+ pci2: pcie@e000a000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe000a000 0x00001000>;
+ ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 2 8
+ 0 0 0 2 &ipic 2 8
+ 0 0 0 3 &ipic 2 8
+ 0 0 0 4 &ipic 2 8>;
+ sleep = <&pmc 0x000c0000>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xc8000000
+ 0x02000000 0 0xc8000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
};
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 9413af3..0533393 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -22,6 +22,8 @@
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
};
cpus {
@@ -107,26 +109,72 @@
reg = <0x200 0x100>;
};
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
+ gpio1: gpio-controller@c00 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+ reg = <0xc00 0x100>;
+ interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
- dfsrr;
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
+ gpio-controller;
+ };
+
+ gpio2: gpio-controller@d00 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+ reg = <0xd00 0x100>;
+ interrupts = <75 0x8>;
+ interrupt-parent = <&ipic>;
+ gpio-controller;
+ };
+
+ sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x0c000000>;
+ ranges;
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+
+ dtt@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ at24@50 {
+ compatible = "at24,24c256";
+ reg = <0x50>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+
+ mcu_pio: mcu@a {
+ #gpio-cells = <2>;
+ compatible = "fsl,mc9s08qg8-mpc8377erdb",
+ "fsl,mcu-mpc8349emitx";
+ reg = <0x0a>;
+ gpio-controller;
+ };
};
- mcu_pio: mcu@a {
- #gpio-cells = <2>;
- compatible = "fsl,mc9s08qg8-mpc8377erdb",
- "fsl,mcu-mpc8349emitx";
- reg = <0x0a>;
- gpio-controller;
+ sdhci@2e000 {
+ compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
};
};
@@ -197,64 +245,76 @@
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
phy_type = "ulpi";
+ sleep = <&pmc 0x00c00000>;
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- phy2: ethernet-phy@2 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+ sleep = <&pmc 0xc0000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
fixed-link = <1 1 1000 0 0>;
tbi-handle = <&tbi1>;
+ sleep = <&pmc 0x30000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
@@ -287,6 +347,7 @@
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
+ sleep = <&pmc 0x03000000>;
};
sata@18000 {
@@ -294,6 +355,7 @@
reg = <0x18000 0x1000>;
interrupts = <44 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x000000c0>;
};
sata@19000 {
@@ -301,6 +363,7 @@
reg = <0x19000 0x1000>;
interrupts = <45 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x00000030>;
};
/* IPIC
@@ -316,6 +379,13 @@
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
+
+ pmc: power@b00 {
+ compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
};
pci0: pci@e0008500 {
@@ -341,6 +411,7 @@
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ sleep = <&pmc 0x00010000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
@@ -350,4 +421,68 @@
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
+
+ pci1: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe0009000 0x00001000>;
+ ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 1 8
+ 0 0 0 2 &ipic 1 8
+ 0 0 0 3 &ipic 1 8
+ 0 0 0 4 &ipic 1 8>;
+ sleep = <&pmc 0x00300000>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xa8000000
+ 0x02000000 0 0xa8000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+
+ pci2: pcie@e000a000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe000a000 0x00001000>;
+ ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 2 8
+ 0 0 0 2 &ipic 2 8
+ 0 0 0 3 &ipic 2 8
+ 0 0 0 4 &ipic 2 8>;
+ sleep = <&pmc 0x000c0000>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xc8000000
+ 0x02000000 0 0xc8000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
};
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index b85fc02..651ff2f 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -23,6 +23,8 @@
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
};
cpus {
@@ -127,21 +129,38 @@
reg = <0x200 0x100>;
};
- i2c@3000 {
+ sleep-nexus {
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x0c000000>;
+ ranges;
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- interrupts = <19 0x8>;
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
+ dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ interrupts = <19 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+ };
+
+ sdhci@2e000 {
+ compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
};
};
@@ -213,70 +232,83 @@
interrupts = <38 0x8>;
dr_mode = "host";
phy_type = "ulpi";
+ sleep = <&pmc 0x00c00000>;
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- phy2: ethernet-phy@2 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+ sleep = <&pmc 0xc0000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
+ sleep = <&pmc 0x30000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
@@ -309,14 +341,7 @@
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sdhc@2e000 {
- model = "eSDHC";
- compatible = "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <42 0x8>;
- interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x03000000>;
};
/* IPIC
@@ -332,6 +357,13 @@
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
+
+ pmc: power@b00 {
+ compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
};
pci0: pci@e0008500 {
@@ -387,6 +419,7 @@
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
clock-frequency = <0>;
+ sleep = <&pmc 0x00010000>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
@@ -395,4 +428,68 @@
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
+
+ pci1: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe0009000 0x00001000>;
+ ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 1 8
+ 0 0 0 2 &ipic 1 8
+ 0 0 0 3 &ipic 1 8
+ 0 0 0 4 &ipic 1 8>;
+ sleep = <&pmc 0x00300000>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xa8000000
+ 0x02000000 0 0xa8000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+
+ pci2: pcie@e000a000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe000a000 0x00001000>;
+ ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 2 8
+ 0 0 0 2 &ipic 2 8
+ 0 0 0 3 &ipic 2 8
+ 0 0 0 4 &ipic 2 8>;
+ sleep = <&pmc 0x000c0000>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xc8000000
+ 0x02000000 0 0xc8000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
};
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 23c10ce..5d90e85 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -22,6 +22,8 @@
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
};
cpus {
@@ -107,26 +109,72 @@
reg = <0x200 0x100>;
};
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
+ gpio1: gpio-controller@c00 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
+ reg = <0xc00 0x100>;
+ interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
- dfsrr;
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
+ gpio-controller;
+ };
+
+ gpio2: gpio-controller@d00 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
+ reg = <0xd00 0x100>;
+ interrupts = <75 0x8>;
+ interrupt-parent = <&ipic>;
+ gpio-controller;
+ };
+
+ sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x0c000000>;
+ ranges;
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+
+ dtt@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ at24@50 {
+ compatible = "at24,24c256";
+ reg = <0x50>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+
+ mcu_pio: mcu@a {
+ #gpio-cells = <2>;
+ compatible = "fsl,mc9s08qg8-mpc8378erdb",
+ "fsl,mcu-mpc8349emitx";
+ reg = <0x0a>;
+ gpio-controller;
+ };
};
- mcu_pio: mcu@a {
- #gpio-cells = <2>;
- compatible = "fsl,mc9s08qg8-mpc8378erdb",
- "fsl,mcu-mpc8349emitx";
- reg = <0x0a>;
- gpio-controller;
+ sdhci@2e000 {
+ compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
};
};
@@ -197,62 +245,76 @@
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
phy_type = "ulpi";
+ sleep = <&pmc 0x00c00000>;
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- phy2: ethernet-phy@2 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+ sleep = <&pmc 0xc0000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
fixed-link = <1 1 1000 0 0>;
+ tbi-handle = <&tbi1>;
+ sleep = <&pmc 0x30000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
@@ -285,6 +347,7 @@
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
+ sleep = <&pmc 0x03000000>;
};
/* IPIC
@@ -300,6 +363,13 @@
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
+
+ pmc: power@b00 {
+ compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
};
pci0: pci@e0008500 {
@@ -325,6 +395,7 @@
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ sleep = <&pmc 0x00010000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
@@ -334,4 +405,68 @@
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
+
+ pci1: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe0009000 0x00001000>;
+ ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 1 8
+ 0 0 0 2 &ipic 1 8
+ 0 0 0 3 &ipic 1 8
+ 0 0 0 4 &ipic 1 8>;
+ sleep = <&pmc 0x00300000>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xa8000000
+ 0x02000000 0 0xa8000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+
+ pci2: pcie@e000a000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe000a000 0x00001000>;
+ ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 2 8
+ 0 0 0 2 &ipic 2 8
+ 0 0 0 3 &ipic 2 8
+ 0 0 0 4 &ipic 2 8>;
+ sleep = <&pmc 0x000c0000>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xc8000000
+ 0x02000000 0 0xc8000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
};
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index acf06c4..d6f208b 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -127,21 +127,38 @@
reg = <0x200 0x100>;
};
- i2c@3000 {
+ sleep-nexus {
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x0c000000>;
+ ranges;
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- interrupts = <19 0x8>;
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
+ dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ interrupts = <19 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+ };
+
+ sdhci@2e000 {
+ compatible = "fsl,mpc8379-esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
};
};
@@ -213,69 +230,83 @@
interrupts = <38 0x8>;
dr_mode = "host";
phy_type = "ulpi";
- };
-
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- phy2: ethernet-phy@2 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ sleep = <&pmc 0x00c00000>;
};
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+ sleep = <&pmc 0xc0000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
+ sleep = <&pmc 0x30000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
@@ -308,14 +339,7 @@
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sdhc@2e000 {
- model = "eSDHC";
- compatible = "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <42 0x8>;
- interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x03000000>;
};
sata@18000 {
@@ -323,6 +347,7 @@
reg = <0x18000 0x1000>;
interrupts = <44 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x000000c0>;
};
sata@19000 {
@@ -330,6 +355,7 @@
reg = <0x19000 0x1000>;
interrupts = <45 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x00000030>;
};
sata@1a000 {
@@ -337,6 +363,7 @@
reg = <0x1a000 0x1000>;
interrupts = <46 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x0000000c>;
};
sata@1b000 {
@@ -344,6 +371,7 @@
reg = <0x1b000 0x1000>;
interrupts = <47 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x00000003>;
};
/* IPIC
@@ -359,6 +387,13 @@
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
+
+ pmc: power@b00 {
+ compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
};
pci0: pci@e0008500 {
@@ -413,6 +448,7 @@
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+ sleep = <&pmc 0x00010000>;
clock-frequency = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 72cdc3c..98ae95b 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -107,26 +107,72 @@
reg = <0x200 0x100>;
};
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
+ gpio1: gpio-controller@c00 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
+ reg = <0xc00 0x100>;
+ interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
- dfsrr;
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
+ gpio-controller;
+ };
+
+ gpio2: gpio-controller@d00 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
+ reg = <0xd00 0x100>;
+ interrupts = <75 0x8>;
+ interrupt-parent = <&ipic>;
+ gpio-controller;
+ };
+
+ sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x0c000000>;
+ ranges;
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+
+ dtt@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ at24@50 {
+ compatible = "at24,24c256";
+ reg = <0x50>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+
+ mcu_pio: mcu@a {
+ #gpio-cells = <2>;
+ compatible = "fsl,mc9s08qg8-mpc8379erdb",
+ "fsl,mcu-mpc8349emitx";
+ reg = <0x0a>;
+ gpio-controller;
+ };
};
- mcu_pio: mcu@a {
- #gpio-cells = <2>;
- compatible = "fsl,mc9s08qg8-mpc8379erdb",
- "fsl,mcu-mpc8349emitx";
- reg = <0x0a>;
- gpio-controller;
+ sdhci@2e000 {
+ compatible = "fsl,mpc8379-esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
};
};
@@ -197,63 +243,76 @@
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
phy_type = "ulpi";
- };
-
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- phy2: ethernet-phy@2 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ sleep = <&pmc 0x00c00000>;
};
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+ sleep = <&pmc 0xc0000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
fixed-link = <1 1 1000 0 0>;
tbi-handle = <&tbi1>;
+ sleep = <&pmc 0x30000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
@@ -286,6 +345,7 @@
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
+ sleep = <&pmc 0x03000000>;
};
sata@18000 {
@@ -293,6 +353,7 @@
reg = <0x18000 0x1000>;
interrupts = <44 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x000000c0>;
};
sata@19000 {
@@ -300,6 +361,7 @@
reg = <0x19000 0x1000>;
interrupts = <45 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x00000030>;
};
sata@1a000 {
@@ -307,6 +369,7 @@
reg = <0x1a000 0x1000>;
interrupts = <46 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x0000000c>;
};
sata@1b000 {
@@ -314,6 +377,7 @@
reg = <0x1b000 0x1000>;
interrupts = <47 0x8>;
interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x00000003>;
};
/* IPIC
@@ -329,6 +393,13 @@
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
+
+ pmc: power@b00 {
+ compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
};
pci0: pci@e0008500 {
@@ -354,6 +425,7 @@
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ sleep = <&pmc 0x00010000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 3c905df..b31c504 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -137,42 +137,6 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
usb@22000 {
compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
reg = <0x22000 0x1000>;
@@ -194,31 +158,73 @@
};
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 0x1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 0x1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
usb@2b000 {
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 79570ff..ddd67be 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -126,97 +126,106 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <7 1>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <7 1>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "FEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <41 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy3>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 221036a..e45097f4 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -126,66 +126,72 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 0668d10..7c6932b 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -98,44 +98,6 @@
dfsrr;
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
@@ -178,31 +140,74 @@
};
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
tbi-handle = <&tbi0>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
tbi-handle = <&tbi1>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index df774a7..804e903 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -142,129 +142,141 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@27520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x27520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
/* eTSEC 3/4 are currently broken
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <3>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
*/
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 053b01e..9484f07 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -126,66 +126,72 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 11b1bcb..cc2acf8 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -115,78 +115,84 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <7 1>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <7 1>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <7 1>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <7 1>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
mpic: pic@40000 {
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 1955bd9..9d52e3b 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -149,78 +149,84 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@7 {
- interrupt-parent = <&mpic>;
- interrupts = <1 1>;
- reg = <0x7>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <1 1>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@7 {
+ interrupt-parent = <&mpic>;
+ interrupts = <1 1>;
+ reg = <0x7>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <1 1>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 359c3b7..6e79a41 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -1,7 +1,7 @@
/*
* MPC8572 DS Device Tree Source
*
- * Copyright 2007, 2008 Freescale Semiconductor Inc.
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -312,129 +312,141 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@27520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x27520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x2>;
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x3>;
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <3>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
@@ -643,7 +655,7 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
- 0x0 0x100000>;
+ 0x0 0x10000>;
uli1575@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
@@ -654,7 +666,7 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
- 0x0 0x100000>;
+ 0x0 0x10000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
@@ -744,7 +756,7 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
- 0x0 0x100000>;
+ 0x0 0x10000>;
};
};
@@ -781,7 +793,7 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
- 0x0 0x100000>;
+ 0x0 0x10000>;
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
new file mode 100644
index 0000000..dbd81a7
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
@@ -0,0 +1,799 @@
+/*
+ * MPC8572 DS Device Tree Source
+ *
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ model = "fsl,MPC8572DS";
+ compatible = "fsl,MPC8572DS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8572@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,8572@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ localbus@fffe05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xf 0xffe05000 0 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
+ 0x1 0x0 0xf 0xe0000000 0x08000000
+ 0x2 0x0 0xf 0xffa00000 0x00040000
+ 0x3 0x0 0xf 0xffdf0000 0x00008000
+ 0x4 0x0 0xf 0xffa40000 0x00040000
+ 0x5 0x0 0xf 0xffa80000 0x00040000
+ 0x6 0x0 0xf 0xffac0000 0x00040000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ ramdisk@0 {
+ reg = <0x0 0x03000000>;
+ read-only;
+ };
+
+ diagnostic@3000000 {
+ reg = <0x03000000 0x00e00000>;
+ read-only;
+ };
+
+ dink@3e00000 {
+ reg = <0x03e00000 0x00200000>;
+ read-only;
+ };
+
+ kernel@4000000 {
+ reg = <0x04000000 0x00400000>;
+ read-only;
+ };
+
+ jffs2@4400000 {
+ reg = <0x04400000 0x03b00000>;
+ };
+
+ dtb@7f00000 {
+ reg = <0x07f00000 0x00080000>;
+ read-only;
+ };
+
+ u-boot@7f80000 {
+ reg = <0x07f80000 0x00080000>;
+ read-only;
+ };
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ u-boot@0 {
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ jffs2@2000000 {
+ reg = <0x02000000 0x10000000>;
+ };
+
+ ramdisk@12000000 {
+ reg = <0x12000000 0x08000000>;
+ read-only;
+ };
+
+ kernel@1a000000 {
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ dtb@1e000000 {
+ reg = <0x1e000000 0x01000000>;
+ read-only;
+ };
+
+ empty@1f000000 {
+ reg = <0x1f000000 0x21000000>;
+ };
+ };
+
+ nand@4,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x4 0x0 0x40000>;
+ };
+
+ nand@5,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x5 0x0 0x40000>;
+ };
+
+ nand@6,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x6 0x0 0x40000>;
+ };
+ };
+
+ soc8572@fffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ reg = <0xf 0xffe00000 0 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed
+ bus-frequency = <0>; // Filled out by uboot.
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ memory-controller@6000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x6000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8572-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x100000>; // L2, 1M
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ dma@c300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+ reg = <0xc300 0x4>;
+ ranges = <0x0 0xc100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <76 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <77 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <78 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <79 2>;
+ };
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x2>;
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x3>;
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 36 2 40 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 32 2 33 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <3>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <37 2 38 2 39 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi3>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ global-utilities@e0000 { //global utilities block
+ compatible = "fsl,mpc8572-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ msi@41600 {
+ compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+ "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+ };
+
+ pci0: pcie@fffe08000 {
+ cell-index = <0>;
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf 0xffe08000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x00000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <24 2>;
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x11 func 0 - PCI slot 1 */
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 func 1 - PCI slot 1 */
+ 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 func 2 - PCI slot 1 */
+ 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 func 3 - PCI slot 1 */
+ 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 func 4 - PCI slot 1 */
+ 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 func 5 - PCI slot 1 */
+ 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 func 6 - PCI slot 1 */
+ 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 func 7 - PCI slot 1 */
+ 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x12 func 0 - PCI slot 2 */
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 0x12 func 1 - PCI slot 2 */
+ 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 0x12 func 2 - PCI slot 2 */
+ 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 0x12 func 3 - PCI slot 2 */
+ 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 0x12 func 4 - PCI slot 2 */
+ 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 0x12 func 5 - PCI slot 2 */
+ 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 0x12 func 6 - PCI slot 2 */
+ 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 0x12 func 7 - PCI slot 2 */
+ 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ // IDSEL 0x1c USB
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+
+ >;
+
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+
+ };
+
+ pci1: pcie@fffe09000 {
+ cell-index = <1>;
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf 0xffe09000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <25 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1
+ >;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ };
+ };
+
+ pci2: pcie@fffe0a000 {
+ cell-index = <2>;
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <26 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index fd462ef..2bc0c71 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -6,7 +6,7 @@
* This dts file allows core0 to have memory, l2, i2c, dma1, global-util, eth0,
* eth1, crypto, pci0, pci1.
*
- * Copyright 2007, 2008 Freescale Semiconductor Inc.
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -148,35 +148,38 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x1>;
+ };
+ };
};
enet1: ethernet@25000 {
@@ -227,7 +230,7 @@
device_type = "open-pic";
protected-sources = <
31 32 33 37 38 39 /* enet2 enet3 */
- 76 77 78 79 27 42 /* dma2 pci2 serial*/
+ 76 77 78 79 26 42 /* dma2 pci2 serial*/
0xe0 0xe1 0xe2 0xe3 /* msi */
0xe4 0xe5 0xe6 0xe7
>;
@@ -376,7 +379,7 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
- 0x0 0x100000>;
+ 0x0 0x10000>;
uli1575@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
@@ -387,7 +390,7 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
- 0x0 0x100000>;
+ 0x0 0x10000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
@@ -477,7 +480,7 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
- 0x0 0x100000>;
+ 0x0 0x10000>;
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index e35230f..159cb3a 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -7,7 +7,7 @@
*
* Please note to add "-b 1" for core1's dts compiling.
*
- * Copyright 2007, 2008 Freescale Semiconductor Inc.
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -186,7 +186,7 @@
protected-sources = <
18 16 10 42 45 58 /* MEM L2 mdio serial crypto */
29 30 34 35 36 40 /* enet0 enet1 */
- 24 26 20 21 22 23 /* pcie0 pcie1 dma1 */
+ 24 25 20 21 22 23 /* pci0 pci1 dma1 */
43 /* i2c */
0x1 0x2 0x3 0x4 /* pci slot */
0x9 0xa 0xb 0xc /* usb */
@@ -228,7 +228,7 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
- 0x0 0x100000>;
+ 0x0 0x10000>;
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index f724d72..1bd3ebe 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -217,6 +217,7 @@
codec-handle = <&cs4270>;
fsl,playback-dma = <&dma00>;
fsl,capture-dma = <&dma01>;
+ fsl,fifo-depth = <8>;
};
ssi@16100 {
@@ -225,6 +226,7 @@
reg = <0x16100 0x100>;
interrupt-parent = <&mpic>;
interrupts = <63 2>;
+ fsl,fifo-depth = <8>;
};
dma@21300 {
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 4481532..d72beb19 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -180,133 +180,144 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@27520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x27520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <3>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index be2c11c..8958347 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -19,6 +19,7 @@
compatible = "phytec,pcm030";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
@@ -29,26 +30,26 @@
reg = <0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
- d-cache-size = <0x4000>; /* L1, 16K */
- i-cache-size = <0x4000>; /* L1, 16K */
- timebase-frequency = <0>; /* From Bootloader */
- bus-frequency = <0>; /* From Bootloader */
- clock-frequency = <0>; /* From Bootloader */
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
};
};
memory {
device_type = "memory";
- reg = <0x00000000 0x04000000>; /* 64MB */
+ reg = <0x00000000 0x04000000>; // 64MB
};
soc5200@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc5200b-immr";
- ranges = <0x0 0xf0000000 0x0000c000>;
- bus-frequency = <0>; /* From bootloader */
- system-frequency = <0>; /* From bootloader */
+ ranges = <0 0xf0000000 0x0000c000>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
cdm@200 {
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
@@ -56,87 +57,70 @@
};
mpc5200_pic: interrupt-controller@500 {
- /* 5200 interrupts are encoded into two levels; */
+ // 5200 interrupts are encoded into two levels;
interrupt-controller;
#interrupt-cells = <3>;
- device_type = "interrupt-controller";
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
reg = <0x500 0x80>;
};
- timer@600 { /* General Purpose Timer */
+ timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- cell-index = <0>;
reg = <0x600 0x10>;
- interrupts = <0x1 0x9 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 9 0>;
fsl,has-wdt;
};
- timer@610 { /* General Purpose Timer */
+ timer@610 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- cell-index = <1>;
reg = <0x610 0x10>;
- interrupts = <0x1 0xa 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 10 0>;
};
- gpt2: timer@620 { /* General Purpose Timer in GPIO mode */
+ gpt2: timer@620 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- cell-index = <2>;
reg = <0x620 0x10>;
- interrupts = <0x1 0xb 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 11 0>;
gpio-controller;
#gpio-cells = <2>;
};
- gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
+ gpt3: timer@630 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- cell-index = <3>;
reg = <0x630 0x10>;
- interrupts = <0x1 0xc 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 12 0>;
gpio-controller;
#gpio-cells = <2>;
};
- gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
+ gpt4: timer@640 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- cell-index = <4>;
reg = <0x640 0x10>;
- interrupts = <0x1 0xd 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 13 0>;
gpio-controller;
#gpio-cells = <2>;
};
- gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
+ gpt5: timer@650 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- cell-index = <5>;
reg = <0x650 0x10>;
- interrupts = <0x1 0xe 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 14 0>;
gpio-controller;
#gpio-cells = <2>;
};
- gpt6: timer@660 { /* General Purpose Timer in GPIO mode */
+ gpt6: timer@660 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- cell-index = <6>;
reg = <0x660 0x10>;
- interrupts = <0x1 0xf 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 15 0>;
gpio-controller;
#gpio-cells = <2>;
};
- gpt7: timer@670 { /* General Purpose Timer in GPIO mode */
+ gpt7: timer@670 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- cell-index = <7>;
reg = <0x670 0x10>;
- interrupts = <0x1 0x10 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 16 0>;
gpio-controller;
#gpio-cells = <2>;
};
@@ -144,40 +128,33 @@
rtc@800 { // Real time clock
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
reg = <0x800 0x100>;
- interrupts = <0x1 0x5 0x0 0x1 0x6 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 5 0 1 6 0>;
};
can@900 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
- cell-index = <0>;
- interrupts = <0x2 0x11 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 17 0>;
reg = <0x900 0x80>;
};
can@980 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
- cell-index = <1>;
- interrupts = <0x2 0x12 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 18 0>;
reg = <0x980 0x80>;
};
gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
- interrupts = <0x1 0x7 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 7 0>;
gpio-controller;
#gpio-cells = <2>;
};
- gpio_wkup: gpio-wkup@c00 {
+ gpio_wkup: gpio@c00 {
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
- interrupts = <0x1 0x8 0x0 0x0 0x3 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 8 0 0 3 0>;
gpio-controller;
#gpio-cells = <2>;
};
@@ -185,26 +162,22 @@
spi@f00 {
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
- interrupts = <0x2 0xd 0x0 0x2 0xe 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 13 0 2 14 0>;
};
usb@1000 {
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
- interrupts = <0x2 0x6 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 6 0>;
};
dma-controller@1200 {
- device_type = "dma-controller";
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
reg = <0x1200 0x80>;
- interrupts = <0x3 0x0 0x0 0x3 0x1 0x0 0x3 0x2 0x0 0x3 0x3 0x0
- 0x3 0x4 0x0 0x3 0x5 0x0 0x3 0x6 0x0 0x3 0x7 0x0
- 0x3 0x8 0x0 0x3 0x9 0x0 0x3 0xa 0x0 0x3 0xb 0x0
- 0x3 0xc 0x0 0x3 0xd 0x0 0x3 0xe 0x0 0x3 0xf 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
};
xlb@1f00 {
@@ -213,24 +186,19 @@
};
ac97@2000 { /* PSC1 in ac97 mode */
- device_type = "sound";
compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
cell-index = <0>;
reg = <0x2000 0x100>;
- interrupts = <0x2 0x2 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 1 0>;
};
/* PSC2 port is used by CAN1/2 */
serial@2400 { /* PSC3 in UART mode */
- device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- port-number = <0>;
cell-index = <2>;
reg = <0x2400 0x100>;
- interrupts = <0x2 0x3 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 3 0>;
};
/* PSC4 is ??? */
@@ -238,55 +206,44 @@
/* PSC5 is ??? */
serial@2c00 { /* PSC6 in UART mode */
- device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- port-number = <1>;
cell-index = <5>;
reg = <0x2c00 0x100>;
- interrupts = <0x2 0x4 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 4 0>;
};
ethernet@3000 {
- device_type = "network";
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
reg = <0x3000 0x400>;
- local-mac-address = [00 00 00 00 00 00];
- interrupts = <0x2 0x5 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio";
- reg = <0x3000 0x400>; /* fec range, since we need to setup fec interrupts */
- interrupts = <0x2 0x5 0x0>; /* these are for "mii command finished", not link changes & co. */
- interrupt-parent = <&mpc5200_pic>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
- phy0:ethernet-phy@0 {
- device_type = "ethernet-phy";
- reg = <0x0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
};
};
ata@3a00 {
- device_type = "ata";
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
- interrupts = <0x2 0x7 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 7 0>;
};
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- cell-index = <0>;
reg = <0x3d00 0x40>;
- interrupts = <0x2 0xf 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 15 0>;
fsl5200-clocking;
};
@@ -294,10 +251,8 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- cell-index = <1>;
reg = <0x3d40 0x40>;
- interrupts = <0x2 0x10 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 16 0>;
fsl5200-clocking;
rtc@51 {
compatible = "nxp,pcf8563";
@@ -307,7 +262,7 @@
};
sram@8000 {
- compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram";
+ compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
};
@@ -340,22 +295,21 @@
device_type = "pci";
compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
reg = <0xf0000d00 0x100>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <0xc000 0x0 0x0 0x1 &mpc5200_pic 0x0 0x0 0x3 /* 1st slot */
- 0xc000 0x0 0x0 0x2 &mpc5200_pic 0x1 0x1 0x3
- 0xc000 0x0 0x0 0x3 &mpc5200_pic 0x1 0x2 0x3
- 0xc000 0x0 0x0 0x4 &mpc5200_pic 0x1 0x3 0x3
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+ 0xc000 0 0 2 &mpc5200_pic 1 1 3
+ 0xc000 0 0 3 &mpc5200_pic 1 2 3
+ 0xc000 0 0 4 &mpc5200_pic 1 3 3
- 0xc800 0x0 0x0 0x1 &mpc5200_pic 0x1 0x1 0x3 /* 2nd slot */
- 0xc800 0x0 0x0 0x2 &mpc5200_pic 0x1 0x2 0x3
- 0xc800 0x0 0x0 0x3 &mpc5200_pic 0x1 0x3 0x3
- 0xc800 0x0 0x0 0x4 &mpc5200_pic 0x0 0x0 0x3>;
+ 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+ 0xc800 0 0 2 &mpc5200_pic 1 2 3
+ 0xc800 0 0 3 &mpc5200_pic 1 3 3
+ 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
- interrupts = <0x2 0x8 0x0 0x2 0x9 0x0 0x2 0xa 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 8 0 2 9 0 2 10 0>;
bus-range = <0 0>;
- ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xb0000000 0x0 0x01000000>;
+ ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
+ 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
};
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
new file mode 100644
index 0000000..0300426
--- /dev/null
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -0,0 +1,392 @@
+/*
+ * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source
+ *
+ * Copyright (C) 2006-2009 Pengutronix
+ * Sascha Hauer <s.hauer@pengutronix.de>
+ * Juergen Beisert <j.beisert@pengutronix.de>
+ * Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "phytec,pcm032";
+ compatible = "phytec,pcm032";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>; // 128MB
+ };
+
+ soc5200@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200b-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ timer@600 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x600 0x10>;
+ interrupts = <1 9 0>;
+ fsl,has-wdt;
+ };
+
+ timer@610 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x610 0x10>;
+ interrupts = <1 10 0>;
+ };
+
+ gpt2: timer@620 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x620 0x10>;
+ interrupts = <1 11 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt3: timer@630 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x630 0x10>;
+ interrupts = <1 12 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt4: timer@640 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x640 0x10>;
+ interrupts = <1 13 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt5: timer@650 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x650 0x10>;
+ interrupts = <1 14 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt6: timer@660 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x660 0x10>;
+ interrupts = <1 15 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt7: timer@670 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x670 0x10>;
+ interrupts = <1 16 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ rtc@800 { // Real time clock
+ compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
+ reg = <0x800 0x100>;
+ interrupts = <1 5 0 1 6 0>;
+ };
+
+ can@900 {
+ compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+ interrupts = <2 17 0>;
+ reg = <0x900 0x80>;
+ };
+
+ can@980 {
+ compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+ interrupts = <2 18 0>;
+ reg = <0x980 0x80>;
+ };
+
+ gpio_simple: gpio@b00 {
+ compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_wkup: gpio@c00 {
+ compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+ reg = <0xc00 0x40>;
+ interrupts = <1 8 0 0 3 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ spi@f00 {
+ compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+ reg = <0xf00 0x20>;
+ interrupts = <2 13 0 2 14 0>;
+ };
+
+ usb@1000 {
+ compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+ reg = <0x1000 0xff>;
+ interrupts = <2 6 0>;
+ };
+
+ dma-controller@1200 {
+ compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ };
+
+ xlb@1f00 {
+ compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ ac97@2000 { /* PSC1 is ac97 */
+ compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
+ cell-index = <0>;
+ reg = <0x2000 0x100>;
+ interrupts = <2 1 0>;
+ };
+
+ /* PSC2 port is used by CAN1/2 */
+
+ serial@2400 { /* PSC3 in UART mode */
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ cell-index = <2>;
+ reg = <0x2400 0x100>;
+ interrupts = <2 3 0>;
+ };
+
+ /* PSC4 is ??? */
+
+ /* PSC5 is ??? */
+
+ serial@2c00 { /* PSC6 in UART mode */
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ cell-index = <5>;
+ reg = <0x2c00 0x100>;
+ interrupts = <2 4 0>;
+ };
+
+ ethernet@3000 {
+ compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ ata@3a00 {
+ compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ };
+
+ i2c@3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ fsl5200-clocking;
+ };
+
+ i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d40 0x40>;
+ interrupts = <2 16 0>;
+ fsl5200-clocking;
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ eeprom@52 {
+ compatible = "at24,24c32";
+ reg = <0x52>;
+ };
+ };
+
+ sram@8000 {
+ compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
+ pci@f0000d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+ reg = <0xf0000d00 0x100>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+ 0xc000 0 0 2 &mpc5200_pic 1 1 3
+ 0xc000 0 0 3 &mpc5200_pic 1 2 3
+ 0xc000 0 0 4 &mpc5200_pic 1 3 3
+
+ 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+ 0xc800 0 0 2 &mpc5200_pic 1 2 3
+ 0xc800 0 0 3 &mpc5200_pic 1 3 3
+ 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 10 0>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
+ 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+ };
+
+ localbus {
+ compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0xfe000000 0x02000000
+ 1 0 0xfc000000 0x02000000
+ 2 0 0xfbe00000 0x00200000
+ 3 0 0xf9e00000 0x02000000
+ 4 0 0xf7e00000 0x02000000
+ 5 0 0xe6000000 0x02000000
+ 6 0 0xe8000000 0x02000000
+ 7 0 0xea000000 0x02000000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ bank-width = <4>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition@0 {
+ label = "ubootl";
+ reg = <0x00000000 0x00040000>;
+ };
+ partition@40000 {
+ label = "kernel";
+ reg = <0x00040000 0x001c0000>;
+ };
+ partition@200000 {
+ label = "jffs2";
+ reg = <0x00200000 0x01d00000>;
+ };
+ partition@1f00000 {
+ label = "uboot";
+ reg = <0x01f00000 0x00040000>;
+ };
+ partition@1f40000 {
+ label = "env";
+ reg = <0x01f40000 0x00040000>;
+ };
+ partition@1f80000 {
+ label = "oftree";
+ reg = <0x01f80000 0x00040000>;
+ };
+ partition@1fc0000 {
+ label = "space";
+ reg = <0x01fc0000 0x00040000>;
+ };
+ };
+
+ sram@2,0 {
+ compatible = "mtd-ram";
+ reg = <2 0 0x00200000>;
+ bank-width = <2>;
+ };
+
+ /*
+ * example snippets for FPGA
+ *
+ * fpga@3,0 {
+ * compatible = "fpga_driver";
+ * reg = <3 0 0x02000000>;
+ * bank-width = <4>;
+ * };
+ *
+ * fpga@4,0 {
+ * compatible = "fpga_driver";
+ * reg = <4 0 0x02000000>;
+ * bank-width = <4>;
+ * };
+ */
+
+ /*
+ * example snippets for free chipselects
+ *
+ * device@5,0 {
+ * compatible = "custom_driver";
+ * reg = <5 0 0x02000000>;
+ * };
+ *
+ * device@6,0 {
+ * compatible = "custom_driver";
+ * reg = <6 0 0x02000000>;
+ * };
+ *
+ * device@7,0 {
+ * compatible = "custom_driver";
+ * reg = <7 0 0x02000000>;
+ * };
+ */
+ };
+};
+
diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts
new file mode 100644
index 0000000..ad402c4
--- /dev/null
+++ b/arch/powerpc/boot/dts/redwood.dts
@@ -0,0 +1,244 @@
+/*
+ * Device Tree Source for AMCC Redwood(460SX)
+ *
+ * Copyright 2008 AMCC <tmarri@amcc.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,redwood";
+ compatible = "amcc,redwood";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,460SX";
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-460sx","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-460sx","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-460sx","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-460sx","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0x0f0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-460sx";
+ dcr-reg = <0x00e 0x002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-460sx";
+ dcr-reg = <0x00c 0x002>;
+ };
+
+ plb {
+ compatible = "ibm,plb-460sx", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-460sx", "ibm,sdram-405gp";
+ dcr-reg = <0x010 0x002>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-460sx", "ibm,mcmal2";
+ dcr-reg = <0x180 0x62>;
+ num-tx-chans = <4>;
+ num-rx-chans = <32>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&UIC1>;
+ interrupts = < /*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x1 0x4
+ /*TXDE*/ 0x2 0x4
+ /*RXDE*/ 0x3 0x4
+ /*COAL TX0*/ 0x18 0x2
+ /*COAL TX1*/ 0x19 0x2
+ /*COAL TX2*/ 0x1a 0x2
+ /*COAL TX3*/ 0x1b 0x2
+ /*COAL RX0*/ 0x1c 0x2
+ /*COAL RX1*/ 0x1d 0x2
+ /*COAL RX2*/ 0x1e 0x2
+ /*COAL RX3*/ 0x1f 0x2>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-460sx", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-460sx", "ibm,ebc";
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ /* ranges property is supplied by U-Boot */
+ interrupts = <0x6 0x4>;
+ interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl512n", "cfi-flash";
+ bank-width = <2>;
+ reg = <0x0000000 0x00000000 0x04000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x001e0000>;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@200000 {
+ label = "ramdisk";
+ reg = <0x00200000 0x01400000>;
+ };
+ partition@1600000 {
+ label = "jffs2";
+ reg = <0x01600000 0x00400000>;
+ };
+ partition@1a00000 {
+ label = "user";
+ reg = <0x01a00000 0x02560000>;
+ };
+ partition@3f60000 {
+ label = "env";
+ reg = <0x03f60000 0x00040000>;
+ };
+ partition@3fa0000 {
+ label = "u-boot";
+ reg = <0x03fa0000 0x00060000>;
+ };
+ };
+ };
+
+ UART0: serial@ef600200 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600200 0x00000008>;
+ virtual-reg = <0xef600200>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x0 0x4>;
+ };
+
+ RGMII0: emac-rgmii@ef600900 {
+ compatible = "ibm,rgmii-460sx", "ibm,rgmii";
+ reg = <0xef600900 0x00000008>;
+ };
+
+ EMAC0: ethernet@ef600a00 {
+ device_type = "network";
+ compatible = "ibm,emac-460sx", "ibm,emac4";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4
+ /*Wake*/ 0x1 &UIC2 0x1d 0x4>;
+ reg = <0xef600a00 0x00000070>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ };
+
+ };
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@ef600200";
+ };
+
+};
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 8d365a5..a36dbbc 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -159,68 +159,76 @@
phy_type = "ulpi";
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@19 {
- interrupt-parent = <&ipic>;
- interrupts = <20 0x8>;
- reg = <0x19>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1a {
- interrupt-parent = <&ipic>;
- interrupts = <21 0x8>;
- reg = <0x1a>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
linux,network-index = <0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@19 {
+ interrupt-parent = <&ipic>;
+ interrupts = <20 0x8>;
+ reg = <0x19>;
+ device_type = "ethernet-phy";
+ };
+
+ phy1: ethernet-phy@1a {
+ interrupt-parent = <&ipic>;
+ interrupts = <21 0x8>;
+ reg = <0x1a>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
linux,network-index = <1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index 2baf4a5..9c5079f 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -234,66 +234,72 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@19 {
- interrupt-parent = <&mpic>;
- interrupts = <0x6 0x1>;
- reg = <0x19>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1a {
- interrupt-parent = <&mpic>;
- interrupts = <0x7 0x1>;
- reg = <0x1a>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@19 {
+ interrupt-parent = <&mpic>;
+ interrupts = <0x6 0x1>;
+ reg = <0x19>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1a {
+ interrupt-parent = <&mpic>;
+ interrupts = <0x7 0x1>;
+ reg = <0x1a>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
index 01542f7..b772405 100644
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ b/arch/powerpc/boot/dts/sbc8560.dts
@@ -139,77 +139,83 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- phy0: ethernet-phy@19 {
- interrupt-parent = <&mpic>;
- interrupts = <0x6 0x1>;
- reg = <0x19>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1a {
- interrupt-parent = <&mpic>;
- interrupts = <0x7 0x1>;
- reg = <0x1a>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@1b {
- interrupt-parent = <&mpic>;
- interrupts = <0x8 0x1>;
- reg = <0x1b>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@1c {
- interrupt-parent = <&mpic>;
- interrupts = <0x8 0x1>;
- reg = <0x1c>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+ phy0: ethernet-phy@19 {
+ interrupt-parent = <&mpic>;
+ interrupts = <0x6 0x1>;
+ reg = <0x19>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1a {
+ interrupt-parent = <&mpic>;
+ interrupts = <0x7 0x1>;
+ reg = <0x1a>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@1b {
+ interrupt-parent = <&mpic>;
+ interrupts = <0x8 0x1>;
+ reg = <0x1b>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@1c {
+ interrupt-parent = <&mpic>;
+ interrupts = <0x8 0x1>;
+ reg = <0x1c>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
mpic: pic@40000 {
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
index 36db981..e3e914e 100644
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -192,132 +192,144 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@1f {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1f>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@27520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x27520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@1f {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x1f>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <3>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts
new file mode 100644
index 0000000..b8d0fc6
--- /dev/null
+++ b/arch/powerpc/boot/dts/socrates.dts
@@ -0,0 +1,338 @@
+/*
+ * Device Tree Source for the Socrates board (MPC8544).
+ *
+ * Copyright (c) 2008 Emcraft Systems.
+ * Sergei Poselenov, <sposelenov@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "abb,socrates";
+ compatible = "abb,socrates";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8544@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000>; // Filled in by U-Boot
+ };
+
+ soc8544@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x00000000 0xe0000000 0x00100000>;
+ reg = <0xe0000000 0x00001000>; // CCSRBAR 1M
+ bus-frequency = <0>; // Filled in by U-Boot
+ compatible = "fsl,mpc8544-immr", "simple-bus";
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8544-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8544-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>;
+ cache-size = <0x40000>; // L2, 256K
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+
+ dtt@28 {
+ compatible = "winbond,w83782d";
+ reg = <0x28>;
+ };
+ rtc@32 {
+ compatible = "epson,rx8025";
+ reg = <0x32>;
+ interrupts = <7 1>;
+ interrupt-parent = <&mpic>;
+ };
+ dtt@4c {
+ compatible = "dallas,ds75";
+ reg = <0x4c>;
+ };
+ ts@4a {
+ compatible = "ti,tsc2003";
+ reg = <0x4a>;
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ };
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <0 1>;
+ reg = <0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <0 1>;
+ reg = <1>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ };
+ };
+ };
+
+ enet1: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 32 2 33 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ };
+ };
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ global-utilities@e0000 { //global utilities block
+ compatible = "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+ };
+
+
+ localbus {
+ compatible = "fsl,mpc8544-localbus",
+ "fsl,pq3-localbus",
+ "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0xe0005000 0x40>;
+
+ ranges = <0 0 0xfc000000 0x04000000
+ 2 0 0xc8000000 0x04000000
+ 3 0 0xc0000000 0x00100000
+ >; /* Overwritten by U-Boot */
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl256n", "cfi-flash";
+ bank-width = <2>;
+ reg = <0x0 0x000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x1e0000>;
+ read-only;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x1e0000 0x20000>;
+ };
+ partition@200000 {
+ label = "root";
+ reg = <0x200000 0x200000>;
+ };
+ partition@400000 {
+ label = "user";
+ reg = <0x400000 0x3b80000>;
+ };
+ partition@3f80000 {
+ label = "env";
+ reg = <0x3f80000 0x40000>;
+ read-only;
+ };
+ partition@3fc0000 {
+ label = "u-boot";
+ reg = <0x3fc0000 0x40000>;
+ read-only;
+ };
+ };
+
+ display@2,0 {
+ compatible = "fujitsu,lime";
+ reg = <2 0x0 0x4000000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <6 1>;
+ };
+
+ fpga_pic: fpga-pic@3,10 {
+ compatible = "abb,socrates-fpga-pic";
+ reg = <3 0x10 0x10>;
+ interrupt-controller;
+ /* IRQs 2, 10, 11, active low, level-sensitive */
+ interrupts = <2 1 10 1 11 1>;
+ interrupt-parent = <&mpic>;
+ #interrupt-cells = <3>;
+ };
+
+ spi@3,60 {
+ compatible = "abb,socrates-spi";
+ reg = <3 0x60 0x10>;
+ interrupts = <8 4 0>; // number, type, routing
+ interrupt-parent = <&fpga_pic>;
+ };
+
+ nand@3,70 {
+ compatible = "abb,socrates-nand";
+ reg = <3 0x70 0x04>;
+ bank-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ data@0 {
+ label = "data";
+ reg = <0x0 0x40000000>;
+ };
+ };
+
+ can@3,100 {
+ compatible = "philips,sja1000";
+ reg = <3 0x100 0x80>;
+ interrupts = <2 8 1>; // number, type, routing
+ interrupt-parent = <&fpga_pic>;
+ };
+ };
+
+ pci0: pci@e0008000 {
+ cell-index = <0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ reg = <0xe0008000 0x1000>;
+ clock-frequency = <66666666>;
+
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x11 */
+ 0x8800 0x0 0x0 1 &mpic 5 1
+ /* IDSEL 0x12 */
+ 0x9000 0x0 0x0 1 &mpic 4 1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <24 2>;
+ bus-range = <0x0 0x0>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>;
+ };
+
+};
diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts
index fff33fe..8b17395 100644
--- a/arch/powerpc/boot/dts/stx_gp3_8560.dts
+++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts
@@ -124,66 +124,72 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <5 4>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- phy4: ethernet-phy@4 {
- interrupt-parent = <&mpic>;
- interrupts = <5 4>;
- reg = <4>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 4>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy4: ethernet-phy@4 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 4>;
+ reg = <4>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy4>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
mpic: pic@40000 {
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index 906302e..c9590b5 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -17,6 +17,7 @@
compatible = "tqc,tqm5200";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
@@ -66,36 +67,33 @@
compatible = "fsl,mpc5200-gpt";
reg = <0x600 0x10>;
interrupts = <1 9 0>;
- interrupt-parent = <&mpc5200_pic>;
fsl,has-wdt;
};
can@900 {
compatible = "fsl,mpc5200-mscan";
interrupts = <2 17 0>;
- interrupt-parent = <&mpc5200_pic>;
reg = <0x900 0x80>;
};
can@980 {
compatible = "fsl,mpc5200-mscan";
interrupts = <2 18 0>;
- interrupt-parent = <&mpc5200_pic>;
reg = <0x980 0x80>;
};
- gpio@b00 {
+ gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
- interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
usb@1000 {
compatible = "fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
interrupts = <2 6 0>;
- interrupt-parent = <&mpc5200_pic>;
};
dma-controller@1200 {
@@ -105,7 +103,6 @@
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
- interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
@@ -114,39 +111,28 @@
};
serial@2000 { // PSC1
- device_type = "serial";
compatible = "fsl,mpc5200-psc-uart";
- port-number = <0>; // Logical port assignment
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
- interrupt-parent = <&mpc5200_pic>;
};
serial@2200 { // PSC2
- device_type = "serial";
compatible = "fsl,mpc5200-psc-uart";
- port-number = <1>; // Logical port assignment
reg = <0x2200 0x100>;
interrupts = <2 2 0>;
- interrupt-parent = <&mpc5200_pic>;
};
serial@2400 { // PSC3
- device_type = "serial";
compatible = "fsl,mpc5200-psc-uart";
- port-number = <2>; // Logical port assignment
reg = <0x2400 0x100>;
interrupts = <2 3 0>;
- interrupt-parent = <&mpc5200_pic>;
};
ethernet@3000 {
- device_type = "network";
compatible = "fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
- interrupt-parent = <&mpc5200_pic>;
phy-handle = <&phy0>;
};
@@ -156,10 +142,8 @@
compatible = "fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
- interrupt-parent = <&mpc5200_pic>;
phy0: ethernet-phy@0 {
- device_type = "ethernet-phy";
reg = <0>;
};
};
@@ -168,7 +152,6 @@
compatible = "fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
interrupts = <2 7 0>;
- interrupt-parent = <&mpc5200_pic>;
};
i2c@3d40 {
@@ -177,7 +160,6 @@
compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
rtc@68 {
@@ -192,9 +174,8 @@
};
};
- lpb {
- model = "fsl,lpb";
- compatible = "fsl,lpb";
+ localbus {
+ compatible = "fsl,mpc5200-lpb","simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0xfc000000 0x02000000>;
@@ -223,7 +204,6 @@
0xc000 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 10 0>;
- interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
0x02000000 0 0x90000000 0x90000000 0 0x10000000
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index a693f01..ac9413a 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -84,6 +84,11 @@
interrupt-parent = <&mpic>;
dfsrr;
+ dtt@50 {
+ compatible = "national,lm75";
+ reg = <0x50>;
+ };
+
rtc@68 {
compatible = "dallas,ds1337";
reg = <0x68>;
@@ -131,94 +136,103 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "FEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <41 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index 9e3f5f0d..c71bb5d 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -83,6 +83,11 @@
interrupt-parent = <&mpic>;
dfsrr;
+ dtt@50 {
+ compatible = "national,lm75";
+ reg = <0x50>;
+ };
+
rtc@68 {
compatible = "dallas,ds1337";
reg = <0x68>;
@@ -130,72 +135,78 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 15086eb..28b1a95 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -85,6 +85,11 @@
interrupt-parent = <&mpic>;
dfsrr;
+ dtt@50 {
+ compatible = "national,lm75";
+ reg = <0x50>;
+ };
+
rtc@68 {
compatible = "dallas,ds1337";
reg = <0x68>;
@@ -143,134 +148,146 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy1: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <3>;
- device_type = "ethernet-phy";
- };
- phy4: ethernet-phy@4 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <4>;
- device_type = "ethernet-phy";
- };
- phy5: ethernet-phy@5 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <5>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@27520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x27520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy1: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ phy4: ethernet-phy@4 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <4>;
+ device_type = "ethernet-phy";
+ };
+ phy5: ethernet-phy@5 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <5>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy3>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <3>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy4>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
@@ -365,14 +382,14 @@
can0@2,0 {
compatible = "intel,82527"; // Bosch CC770
reg = <2 0x0 0x100>;
- interrupts = <4 0>;
+ interrupts = <4 1>;
interrupt-parent = <&mpic>;
};
can1@2,100 {
compatible = "intel,82527"; // Bosch CC770
reg = <2 0x100 0x100>;
- interrupts = <4 0>;
+ interrupts = <4 1>;
interrupt-parent = <&mpic>;
};
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index b7b65f5..826fb62 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -85,6 +85,11 @@
interrupt-parent = <&mpic>;
dfsrr;
+ dtt@50 {
+ compatible = "national,lm75";
+ reg = <0x50>;
+ };
+
rtc@68 {
compatible = "dallas,ds1337";
reg = <0x68>;
@@ -143,134 +148,146 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy1: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <3>;
- device_type = "ethernet-phy";
- };
- phy4: ethernet-phy@4 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <4>;
- device_type = "ethernet-phy";
- };
- phy5: ethernet-phy@5 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <5>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@27520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x27520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy1: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ phy4: ethernet-phy@4 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <4>;
+ device_type = "ethernet-phy";
+ };
+ phy5: ethernet-phy@5 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <5>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy3>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <3>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy4>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
@@ -365,14 +382,14 @@
can0@2,0 {
compatible = "intel,82527"; // Bosch CC770
reg = <2 0x0 0x100>;
- interrupts = <4 0>;
+ interrupts = <4 1>;
interrupt-parent = <&mpic>;
};
can1@2,100 {
compatible = "intel,82527"; // Bosch CC770
reg = <2 0x100 0x100>;
- interrupts = <4 0>;
+ interrupts = <4 1>;
interrupt-parent = <&mpic>;
};
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index cf92b4e..a133ded 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -83,6 +83,11 @@
interrupt-parent = <&mpic>;
dfsrr;
+ dtt@50 {
+ compatible = "national,lm75";
+ reg = <0x50>;
+ };
+
rtc@68 {
compatible = "dallas,ds1337";
reg = <0x68>;
@@ -130,72 +135,78 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index 9e1ab2d..649e2e5 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -85,6 +85,11 @@
interrupt-parent = <&mpic>;
dfsrr;
+ dtt@50 {
+ compatible = "national,lm75";
+ reg = <0x50>;
+ };
+
rtc@68 {
compatible = "dallas,ds1337";
reg = <0x68>;
@@ -132,72 +137,78 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <8 1>;
- reg = <3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x25520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
mpic: pic@40000 {
@@ -335,14 +346,14 @@
can0@2,0 {
compatible = "intel,82527"; // Bosch CC770
reg = <2 0x0 0x100>;
- interrupts = <4 0>;
+ interrupts = <4 1>;
interrupt-parent = <&mpic>;
};
can1@2,100 {
compatible = "intel,82527"; // Bosch CC770
reg = <2 0x100 0x100>;
- interrupts = <4 0>;
+ interrupts = <4 1>;
interrupt-parent = <&mpic>;
};
};
diff --git a/arch/powerpc/boot/dts/virtex440-ml507.dts b/arch/powerpc/boot/dts/virtex440-ml507.dts
index dc8e78e..52d8c1a 100644
--- a/arch/powerpc/boot/dts/virtex440-ml507.dts
+++ b/arch/powerpc/boot/dts/virtex440-ml507.dts
@@ -7,6 +7,15 @@
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
+ *
+ * ---
+ *
+ * Device Tree Generator version: 1.1
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
+ *
+ * XPS project directory: ml507_ppc440_emb_ref
*/
/dts-v1/;
@@ -22,8 +31,8 @@
reg = < 0 0x10000000 >;
} ;
chosen {
- bootargs = "console=ttyS0 ip=on root=/dev/ram";
- linux,stdout-path = "/plb@0/serial@83e00000";
+ bootargs = "console=ttyS0 root=/dev/ram";
+ linux,stdout-path = &RS232_Uart_1;
} ;
cpus {
#address-cells = <1>;
@@ -136,19 +145,19 @@
compatible = "xlnx,ll-dma-1.00.a";
dcr-reg = < 0x80 0x11 >;
interrupt-parent = <&xps_intc_0>;
- interrupts = < 9 2 0xa 2 >;
+ interrupts = < 10 2 11 2 >;
} ;
} ;
} ;
plb_v46_0: plb@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "xlnx,plb-v46-1.02.a", "simple-bus";
+ compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
ranges ;
DIP_Switches_8Bit: gpio@81460000 {
compatible = "xlnx,xps-gpio-1.00.a";
interrupt-parent = <&xps_intc_0>;
- interrupts = < 6 2 >;
+ interrupts = < 7 2 >;
reg = < 0x81460000 0x10000 >;
xlnx,all-inputs = <1>;
xlnx,all-inputs-2 = <0>;
@@ -163,6 +172,86 @@
xlnx,tri-default = <0xffffffff>;
xlnx,tri-default-2 = <0xffffffff>;
} ;
+ FLASH: flash@fc000000 {
+ bank-width = <2>;
+ compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+ reg = < 0xfc000000 0x2000000 >;
+ xlnx,family = "virtex5";
+ xlnx,include-datawidth-matching-0 = <0x1>;
+ xlnx,include-datawidth-matching-1 = <0x0>;
+ xlnx,include-datawidth-matching-2 = <0x0>;
+ xlnx,include-datawidth-matching-3 = <0x0>;
+ xlnx,include-negedge-ioregs = <0x0>;
+ xlnx,include-plb-ipif = <0x1>;
+ xlnx,include-wrbuf = <0x1>;
+ xlnx,max-mem-width = <0x10>;
+ xlnx,mch-native-dwidth = <0x20>;
+ xlnx,mch-plb-clk-period-ps = <0x2710>;
+ xlnx,mch-splb-awidth = <0x20>;
+ xlnx,mch0-accessbuf-depth = <0x10>;
+ xlnx,mch0-protocol = <0x0>;
+ xlnx,mch0-rddatabuf-depth = <0x10>;
+ xlnx,mch1-accessbuf-depth = <0x10>;
+ xlnx,mch1-protocol = <0x0>;
+ xlnx,mch1-rddatabuf-depth = <0x10>;
+ xlnx,mch2-accessbuf-depth = <0x10>;
+ xlnx,mch2-protocol = <0x0>;
+ xlnx,mch2-rddatabuf-depth = <0x10>;
+ xlnx,mch3-accessbuf-depth = <0x10>;
+ xlnx,mch3-protocol = <0x0>;
+ xlnx,mch3-rddatabuf-depth = <0x10>;
+ xlnx,mem0-width = <0x10>;
+ xlnx,mem1-width = <0x20>;
+ xlnx,mem2-width = <0x20>;
+ xlnx,mem3-width = <0x20>;
+ xlnx,num-banks-mem = <0x1>;
+ xlnx,num-channels = <0x2>;
+ xlnx,priority-mode = <0x0>;
+ xlnx,synch-mem-0 = <0x0>;
+ xlnx,synch-mem-1 = <0x0>;
+ xlnx,synch-mem-2 = <0x0>;
+ xlnx,synch-mem-3 = <0x0>;
+ xlnx,synch-pipedelay-0 = <0x2>;
+ xlnx,synch-pipedelay-1 = <0x2>;
+ xlnx,synch-pipedelay-2 = <0x2>;
+ xlnx,synch-pipedelay-3 = <0x2>;
+ xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+ xlnx,tavdv-ps-mem-1 = <0x3a98>;
+ xlnx,tavdv-ps-mem-2 = <0x3a98>;
+ xlnx,tavdv-ps-mem-3 = <0x3a98>;
+ xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+ xlnx,tcedv-ps-mem-1 = <0x3a98>;
+ xlnx,tcedv-ps-mem-2 = <0x3a98>;
+ xlnx,tcedv-ps-mem-3 = <0x3a98>;
+ xlnx,thzce-ps-mem-0 = <0x88b8>;
+ xlnx,thzce-ps-mem-1 = <0x1b58>;
+ xlnx,thzce-ps-mem-2 = <0x1b58>;
+ xlnx,thzce-ps-mem-3 = <0x1b58>;
+ xlnx,thzoe-ps-mem-0 = <0x1b58>;
+ xlnx,thzoe-ps-mem-1 = <0x1b58>;
+ xlnx,thzoe-ps-mem-2 = <0x1b58>;
+ xlnx,thzoe-ps-mem-3 = <0x1b58>;
+ xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+ xlnx,tlzwe-ps-mem-1 = <0x0>;
+ xlnx,tlzwe-ps-mem-2 = <0x0>;
+ xlnx,tlzwe-ps-mem-3 = <0x0>;
+ xlnx,twc-ps-mem-0 = <0x2af8>;
+ xlnx,twc-ps-mem-1 = <0x3a98>;
+ xlnx,twc-ps-mem-2 = <0x3a98>;
+ xlnx,twc-ps-mem-3 = <0x3a98>;
+ xlnx,twp-ps-mem-0 = <0x11170>;
+ xlnx,twp-ps-mem-1 = <0x2ee0>;
+ xlnx,twp-ps-mem-2 = <0x2ee0>;
+ xlnx,twp-ps-mem-3 = <0x2ee0>;
+ xlnx,xcl0-linesize = <0x4>;
+ xlnx,xcl0-writexfer = <0x1>;
+ xlnx,xcl1-linesize = <0x4>;
+ xlnx,xcl1-writexfer = <0x1>;
+ xlnx,xcl2-linesize = <0x4>;
+ xlnx,xcl2-writexfer = <0x1>;
+ xlnx,xcl3-linesize = <0x4>;
+ xlnx,xcl3-writexfer = <0x1>;
+ } ;
Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -185,6 +274,19 @@
xlnx,txfifo = <0x1000>;
} ;
} ;
+ IIC_EEPROM: i2c@81600000 {
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 6 2 >;
+ reg = < 0x81600000 0x10000 >;
+ xlnx,clk-freq = <0x5f5e100>;
+ xlnx,family = "virtex5";
+ xlnx,gpo-width = <0x1>;
+ xlnx,iic-freq = <0x186a0>;
+ xlnx,scl-inertial-delay = <0x0>;
+ xlnx,sda-inertial-delay = <0x0>;
+ xlnx,ten-bit-adr = <0x0>;
+ } ;
LEDs_8Bit: gpio@81400000 {
compatible = "xlnx,xps-gpio-1.00.a";
reg = < 0x81400000 0x10000 >;
@@ -220,7 +322,7 @@
Push_Buttons_5Bit: gpio@81440000 {
compatible = "xlnx,xps-gpio-1.00.a";
interrupt-parent = <&xps_intc_0>;
- interrupts = < 7 2 >;
+ interrupts = < 8 2 >;
reg = < 0x81440000 0x10000 >;
xlnx,all-inputs = <1>;
xlnx,all-inputs-2 = <0>;
@@ -237,13 +339,13 @@
} ;
RS232_Uart_1: serial@83e00000 {
clock-frequency = <100000000>;
- compatible = "xlnx,xps-uart16550-2.00.a", "ns16550";
- current-speed = <0x2580>;
+ compatible = "xlnx,xps-uart16550-2.00.b", "ns16550";
+ current-speed = <9600>;
device_type = "serial";
interrupt-parent = <&xps_intc_0>;
- interrupts = < 8 2 >;
+ interrupts = < 9 2 >;
reg = < 0x83e00000 0x10000 >;
- reg-offset = <3>;
+ reg-offset = <0x1003>;
reg-shift = <2>;
xlnx,family = "virtex5";
xlnx,has-external-rclk = <0>;
@@ -268,7 +370,7 @@
compatible = "xlnx,xps-intc-1.00.a";
interrupt-controller ;
reg = < 0x81800000 0x10000 >;
- xlnx,num-intr-inputs = <0xb>;
+ xlnx,num-intr-inputs = <0xc>;
} ;
xps_timebase_wdt_1: xps-timebase-wdt@83a00000 {
compatible = "xlnx,xps-timebase-wdt-1.00.b";
diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c
index 8b3607c..f2156f0 100644
--- a/arch/powerpc/boot/serial.c
+++ b/arch/powerpc/boot/serial.c
@@ -117,7 +117,8 @@
if (devp == NULL)
goto err_out;
- if (dt_is_compatible(devp, "ns16550"))
+ if (dt_is_compatible(devp, "ns16550") ||
+ dt_is_compatible(devp, "pnpPNP,501"))
rc = ns16550_console_init(devp, &serial_cd);
else if (dt_is_compatible(devp, "marvell,mv64360-mpsc"))
rc = mpsc_console_init(devp, &serial_cd);
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 965c237..3ac75ae 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -186,6 +186,9 @@
*-mpc85*|*-tqm85*|*-sbc85*)
platformo=$object/cuboot-85xx.o
;;
+ *-amigaone)
+ link_address='0x800000'
+ ;;
esac
;;
ps3)
@@ -211,11 +214,11 @@
binary=y
;;
simpleboot-virtex440-*)
- platformo="$object/simpleboot.o $object/virtex.o"
+ platformo="$object/fixed-head.o $object/simpleboot.o $object/virtex.o"
binary=y
;;
simpleboot-*)
- platformo="$object/simpleboot.o"
+ platformo="$object/fixed-head.o $object/simpleboot.o"
binary=y
;;
asp834x-redboot)
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index 81cdcc4..f9a08ee 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:35 2009
+# Linux kernel version: 2.6.29-rc3
+# Mon Feb 2 13:13:04 2009
#
# CONFIG_PPC64 is not set
@@ -74,6 +74,15 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
@@ -147,11 +156,6 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
@@ -373,6 +377,7 @@
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -384,6 +389,7 @@
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=35000
@@ -466,6 +472,15 @@
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -533,13 +548,136 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+CONFIG_SENSORS_AD7414=y
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
@@ -556,7 +694,12 @@
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
@@ -574,6 +717,7 @@
# Multimedia drivers
#
CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
@@ -590,7 +734,109 @@
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
diff --git a/arch/powerpc/configs/44x/redwood_defconfig b/arch/powerpc/configs/44x/redwood_defconfig
new file mode 100644
index 0000000..e665433
--- /dev/null
+++ b/arch/powerpc/configs/44x/redwood_defconfig
@@ -0,0 +1,1176 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc3
+# Wed Feb 4 14:31:09 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
+CONFIG_REDWOOD=y
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_460SX=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_FUSION=y
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+CONFIG_I2O=y
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+# CONFIG_I2O_CONFIG is not set
+# CONFIG_I2O_BUS is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+CONFIG_IBM_NEW_EMAC_DEBUG=y
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+CONFIG_E1000E=y
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+CONFIG_I2C_DEBUG_CHIP=y
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=y
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
new file mode 100644
index 0000000..0cc90482
--- /dev/null
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -0,0 +1,1410 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26.2
+# Sat Oct 18 11:06:13 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC85xx_DS is not set
+CONFIG_SOCRATES=y
+# CONFIG_KSI8560 is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+
+#
+# CAN Device Drivers
+#
+# CONFIG_CAN_VCAN is not set
+# CONFIG_CAN_OLD_DRIVERS is not set
+# CONFIG_CAN_SLCAN is not set
+CONFIG_CAN_SJA1000=y
+CONFIG_CAN_SJA1000_MEM_OF=y
+# CONFIG_CAN_EMS_PCI is not set
+# CONFIG_CAN_IXXAT_PCI is not set
+# CONFIG_CAN_PEAK_PCI is not set
+# CONFIG_CAN_KVASER_PCI is not set
+# CONFIG_CAN_MSCAN is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+CONFIG_MTD_NAND_SOCRATES=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_TOUCHSCREEN_TSC2003=y
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_SOCRATES=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=y
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+CONFIG_SENSORS_W83781D=y
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_HWMON_DEBUG_CHIP=y
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_MB862XX=y
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+CONFIG_FB_MB862XX_LIME=y
+# CONFIG_FB_PRE_INIT_FB is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_FSL_DIU is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+CONFIG_RTC_DRV_RX8025=y
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PPC=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
new file mode 100644
index 0000000..df2c163
--- /dev/null
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -0,0 +1,1889 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc7
+# Fri Mar 13 15:36:11 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
+# CONFIG_MPC8641_HPCN is not set
+# CONFIG_SBC8641D is not set
+# CONFIG_MPC8610_HPCD is not set
+CONFIG_GEF_PPC9A=y
+# CONFIG_GEF_SBC310 is not set
+# CONFIG_GEF_SBC610 is not set
+CONFIG_MPC8641=y
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_QUICC_ENGINE is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+# CONFIG_IP_NF_MATCH_AH is not set
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SECURITY is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+# CONFIG_IP6_NF_SECURITY is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_MULTIQ is not set
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_FORE200E is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_ATM_SOLOS is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_NET_FC is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+CONFIG_NVRAM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_DS1682=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM92=y
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_GEF_WDT=y
+# CONFIG_8xxx_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_ATM is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+CONFIG_RTC_DRV_RX8581=y
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
new file mode 100644
index 0000000..bd236b3
--- /dev/null
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -0,0 +1,1613 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc3
+# Wed Jan 28 23:05:34 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+CONFIG_PPC_MSI_BITMAP=y
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
+# CONFIG_MPC8641_HPCN is not set
+# CONFIG_SBC8641D is not set
+# CONFIG_MPC8610_HPCD is not set
+CONFIG_GEF_SBC310=y
+# CONFIG_GEF_SBC610 is not set
+CONFIG_MPC8641=y
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_QUICC_ENGINE is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+# CONFIG_SATA_FSL is not set
+# CONFIG_ATA_SFF is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_NET_FC is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+CONFIG_NVRAM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_DS1682=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM92=y
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_GEF_WDT=y
+# CONFIG_8xxx_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+CONFIG_RTC_DRV_RX8581=y
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/amigaone_defconfig b/arch/powerpc/configs/amigaone_defconfig
new file mode 100644
index 0000000..b63cc38
--- /dev/null
+++ b/arch/powerpc/configs/amigaone_defconfig
@@ -0,0 +1,1636 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc3
+# Sun Feb 1 14:22:42 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_CHECK_CACHE_COHERENCY=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_AMIGAONE=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_PPC_I8259=y
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+# CONFIG_PARPORT_SERIAL is not set
+CONFIG_PARPORT_PC_FIFO=y
+# CONFIG_PARPORT_PC_SUPERIO is not set
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+# CONFIG_PARPORT_1284 is not set
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SIIMAGE=y
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_MMIO is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=y
+# CONFIG_TYPHOON is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_NET_POCKET is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PCSPKR=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_PRINTER is not set
+# CONFIG_PPDEV is not set
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=y
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+CONFIG_FB_3DFX=y
+# CONFIG_FB_3DFX_ACCEL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=m
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_USS720 is not set
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+CONFIG_JBD=y
+CONFIG_JBD2=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
+CONFIG_IRQSTACKS=y
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 81afc8b..af0cd55 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:40:44 2009
+# Linux kernel version: 2.6.29-rc3
+# Fri Feb 6 09:48:53 2009
#
# CONFIG_PPC64 is not set
@@ -388,7 +388,10 @@
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
@@ -502,7 +505,7 @@
#
# EEPROM support
#
-# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
@@ -678,7 +681,7 @@
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
+CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
@@ -815,8 +818,6 @@
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -1281,7 +1282,61 @@
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 88c6295..2524018 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -2067,9 +2067,9 @@
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_HCALL_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
+CONFIG_CODE_PATCHING_SELFTEST=y
+CONFIG_FTR_FIXUP_SELFTEST=y
+CONFIG_MSI_BITMAP_SELFTEST=y
CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
CONFIG_XMON_DISASSEMBLY=y
diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h
index 107d9b9..37c32aba 100644
--- a/arch/powerpc/include/asm/code-patching.h
+++ b/arch/powerpc/include/asm/code-patching.h
@@ -11,9 +11,7 @@
*/
#include <asm/types.h>
-
-#define PPC_NOP_INSTR 0x60000000
-#define PPC_LWSYNC_INSTR 0x7c2004ac
+#include <asm/ppc-opcode.h>
/* Flags for create_branch:
* "b" == create_branch(addr, target, 0);
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 21172ba..80f315e 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -145,6 +145,7 @@
#define CPU_FTR_USE_TB ASM_CONST(0x0000000000000040)
#define CPU_FTR_L2CSR ASM_CONST(0x0000000000000080)
#define CPU_FTR_601 ASM_CONST(0x0000000000000100)
+#define CPU_FTR_DBELL ASM_CONST(0x0000000000000200)
#define CPU_FTR_CAN_NAP ASM_CONST(0x0000000000000400)
#define CPU_FTR_L3CR ASM_CONST(0x0000000000000800)
#define CPU_FTR_L3_DISABLE_NAP ASM_CONST(0x0000000000001000)
@@ -375,7 +376,8 @@
CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN | \
- CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE)
+ CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
+ CPU_FTR_DBELL)
#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
/* 64-bit CPUs */
diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h
new file mode 100644
index 0000000..501189a
--- /dev/null
+++ b/arch/powerpc/include/asm/dbell.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2009 Freescale Semicondutor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * provides masks and opcode images for use by code generation, emulation
+ * and for instructions that older assemblers might not know about
+ */
+#ifndef _ASM_POWERPC_DBELL_H
+#define _ASM_POWERPC_DBELL_H
+
+#include <linux/smp.h>
+#include <linux/threads.h>
+
+#include <asm/ppc-opcode.h>
+
+#define PPC_DBELL_MSG_BRDCAST (0x04000000)
+#define PPC_DBELL_TYPE(x) (((x) & 0xf) << 28)
+enum ppc_dbell {
+ PPC_DBELL = 0, /* doorbell */
+ PPC_DBELL_CRIT = 1, /* critical doorbell */
+ PPC_G_DBELL = 2, /* guest doorbell */
+ PPC_G_DBELL_CRIT = 3, /* guest critical doorbell */
+ PPC_G_DBELL_MC = 4, /* guest mcheck doorbell */
+};
+
+#ifdef CONFIG_SMP
+extern unsigned long dbell_smp_message[NR_CPUS];
+extern void smp_dbell_message_pass(int target, int msg);
+#endif
+
+static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag)
+{
+ u32 msg = PPC_DBELL_TYPE(type) | (flags & PPC_DBELL_MSG_BRDCAST) |
+ (tag & 0x07ffffff);
+
+ __asm__ __volatile__ (PPC_MSGSND(%0) : : "r" (msg));
+}
+
+#endif /* _ASM_POWERPC_DBELL_H */
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 86cef7d..c69f2b5 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -109,18 +109,8 @@
* only ISA DMA device we support is the floppy and we have a hack
* in the floppy driver directly to get a device for us.
*/
-
- if (unlikely(dev == NULL) || dev->archdata.dma_ops == NULL) {
-#ifdef CONFIG_PPC64
+ if (unlikely(dev == NULL))
return NULL;
-#else
- /* Use default on 32-bit if dma_ops is not set up */
- /* TODO: Long term, we should fix drivers so that dev and
- * archdata dma_ops are set up for all buses.
- */
- return &dma_direct_ops;
-#endif
- }
return dev->archdata.dma_ops;
}
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index b5600ce..1a856b1 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -8,6 +8,7 @@
#endif
#include <linux/types.h>
+
#include <asm/ptrace.h>
#include <asm/cputable.h>
#include <asm/auxvec.h>
@@ -178,7 +179,8 @@
the loader. We need to make sure that it is out of the way of the program
that it will "exec", and that there is sufficient room for the brk. */
-#define ELF_ET_DYN_BASE (0x20000000)
+extern unsigned long randomize_et_dyn(unsigned long base);
+#define ELF_ET_DYN_BASE (randomize_et_dyn(0x20000000))
/*
* Our registers are always unsigned longs, whether we're a 32 bit
@@ -270,6 +272,14 @@
int uses_interp);
#define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b);
+/* 1GB for 64bit, 8MB for 32bit */
+#define STACK_RND_MASK (is_32bit_task() ? \
+ (0x7ff >> (PAGE_SHIFT - 12)) : \
+ (0x3ffff >> (PAGE_SHIFT - 12)))
+
+extern unsigned long arch_randomize_brk(struct mm_struct *mm);
+#define arch_randomize_brk arch_randomize_brk
+
#endif /* __KERNEL__ */
/*
diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h
index 8428b38..d60fd18 100644
--- a/arch/powerpc/include/asm/fixmap.h
+++ b/arch/powerpc/include/asm/fixmap.h
@@ -61,7 +61,7 @@
* Some hardware wants to get fixmapped without caching.
*/
#define set_fixmap_nocache(idx, phys) \
- __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+ __set_fixmap(idx, phys, PAGE_KERNEL_NCG)
#define clear_fixmap(idx) \
__set_fixmap(idx, 0, __pgprot(0))
diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h
index e5f2ae8..dde1296 100644
--- a/arch/powerpc/include/asm/ftrace.h
+++ b/arch/powerpc/include/asm/ftrace.h
@@ -5,7 +5,44 @@
#define MCOUNT_ADDR ((long)(_mcount))
#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */
-#ifndef __ASSEMBLY__
+#ifdef __ASSEMBLY__
+
+/* Based off of objdump optput from glibc */
+
+#define MCOUNT_SAVE_FRAME \
+ stwu r1,-48(r1); \
+ stw r3, 12(r1); \
+ stw r4, 16(r1); \
+ stw r5, 20(r1); \
+ stw r6, 24(r1); \
+ mflr r3; \
+ lwz r4, 52(r1); \
+ mfcr r5; \
+ stw r7, 28(r1); \
+ stw r8, 32(r1); \
+ stw r9, 36(r1); \
+ stw r10,40(r1); \
+ stw r3, 44(r1); \
+ stw r5, 8(r1)
+
+#define MCOUNT_RESTORE_FRAME \
+ lwz r6, 8(r1); \
+ lwz r0, 44(r1); \
+ lwz r3, 12(r1); \
+ mtctr r0; \
+ lwz r4, 16(r1); \
+ mtcr r6; \
+ lwz r5, 20(r1); \
+ lwz r6, 24(r1); \
+ lwz r0, 52(r1); \
+ lwz r7, 28(r1); \
+ lwz r8, 32(r1); \
+ mtlr r0; \
+ lwz r9, 36(r1); \
+ lwz r10,40(r1); \
+ addi r1, r1, 48
+
+#else /* !__ASSEMBLY__ */
extern void _mcount(void);
#ifdef CONFIG_DYNAMIC_FTRACE
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
index 04e4a62..545028f 100644
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -39,15 +39,15 @@
* chunk of RAM.
*/
/*
- * We use one full pte table with 4K pages. And with 16K/64K pages pte
- * table covers enough memory (32MB and 512MB resp.) that both FIXMAP
- * and PKMAP can be placed in single pte table. We use 1024 pages for
- * PKMAP in case of 16K/64K pages.
+ * We use one full pte table with 4K pages. And with 16K/64K/256K pages pte
+ * table covers enough memory (32MB/512MB/2GB resp.), so that both FIXMAP
+ * and PKMAP can be placed in a single pte table. We use 512 pages for PKMAP
+ * in case of 16K/64K/256K page sizes.
*/
#ifdef CONFIG_PPC_4K_PAGES
#define PKMAP_ORDER PTE_SHIFT
#else
-#define PKMAP_ORDER 10
+#define PKMAP_ORDER 9
#endif
#define LAST_PKMAP (1 << PKMAP_ORDER)
#ifndef CONFIG_PPC_4K_PAGES
@@ -99,7 +99,7 @@
#ifdef CONFIG_DEBUG_HIGHMEM
BUG_ON(!pte_none(*(kmap_pte-idx)));
#endif
- __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot));
+ __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
local_flush_tlb_page(NULL, vaddr);
return (void*) vaddr;
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index f75a5fc..b7e034b 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -129,7 +129,7 @@
* interrupt-retrigger: should we handle this via lost interrupts and IPIs
* or should we not care like we do now ? --BenH.
*/
-struct hw_interrupt_type;
+struct irq_chip;
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_HW_IRQ_H */
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 494cd8b..001f2f1 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -632,6 +632,9 @@
* ioremap_flags and cannot be hooked (but can be used by a hook on one
* of the previous ones)
*
+ * * __ioremap_caller is the same as above but takes an explicit caller
+ * reference rather than using __builtin_return_address(0)
+ *
* * __iounmap, is the low level implementation used by iounmap and cannot
* be hooked (but can be used by a hook on iounmap)
*
@@ -646,6 +649,9 @@
extern void __iomem *__ioremap(phys_addr_t, unsigned long size,
unsigned long flags);
+extern void __iomem *__ioremap_caller(phys_addr_t, unsigned long size,
+ unsigned long flags, void *caller);
+
extern void __iounmap(volatile void __iomem *addr);
extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea,
diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
index 25aaa97..68235f7 100644
--- a/arch/powerpc/include/asm/lppaca.h
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -97,7 +97,7 @@
u64 saved_gpr4; // Saved GPR4 x28-x2F
u64 saved_gpr5; // Saved GPR5 x30-x37
- u8 reserved4; // Reserved x38-x38
+ u8 dtl_enable_mask; // Dispatch Trace Log mask x38-x38
u8 donate_dedicated_cpu; // Donate dedicated CPU cycles x39-x39
u8 fpregs_in_use; // FP regs in use x3A-x3A
u8 pmcregs_in_use; // PMC regs in use x3B-x3B
@@ -133,8 +133,10 @@
//=============================================================================
// CACHE_LINE_4-5 0x0180 - 0x027F Contains PMC interrupt data
//=============================================================================
- u32 page_ins; // CMO Hint - # page ins by OS x00-x04
- u8 pmc_save_area[252]; // PMC interrupt Area x04-xFF
+ u32 page_ins; // CMO Hint - # page ins by OS x00-x03
+ u8 reserved8[148]; // Reserved x04-x97
+ volatile u64 dtl_idx; // Dispatch Trace Log head idx x98-x9F
+ u8 reserved9[96]; // Reserved xA0-xFF
} __attribute__((__aligned__(0x400)));
extern struct lppaca lppaca[];
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 2740c44..0efdb1d 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -90,7 +90,7 @@
void (*tce_flush)(struct iommu_table *tbl);
void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size,
- unsigned long flags);
+ unsigned long flags, void *caller);
void (*iounmap)(volatile void __iomem *token);
#ifdef CONFIG_PM
@@ -327,8 +327,6 @@
*/
/* Print a boot progress message. */
void ppc64_boot_msg(unsigned int src, const char *msg);
-/* Print a termination message (print only -- does not stop the kernel) */
-void ppc64_terminate_msg(unsigned int src, const char *msg);
static inline void log_error(char *buf, unsigned int err_type, int fatal)
{
diff --git a/arch/powerpc/include/asm/mmu-44x.h b/arch/powerpc/include/asm/mmu-44x.h
index 27cc6fd..3c86576 100644
--- a/arch/powerpc/include/asm/mmu-44x.h
+++ b/arch/powerpc/include/asm/mmu-44x.h
@@ -83,6 +83,8 @@
#define PPC44x_TLBE_SIZE PPC44x_TLB_16K
#elif (PAGE_SHIFT == 16)
#define PPC44x_TLBE_SIZE PPC44x_TLB_64K
+#elif (PAGE_SHIFT == 18)
+#define PPC44x_TLBE_SIZE PPC44x_TLB_256K
#else
#error "Unsupported PAGE_SIZE"
#endif
diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
new file mode 100644
index 0000000..7e74cff
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -0,0 +1,105 @@
+#ifndef _ASM_POWERPC_MMU_BOOK3E_H_
+#define _ASM_POWERPC_MMU_BOOK3E_H_
+/*
+ * Freescale Book-E/Book-3e (ISA 2.06+) MMU support
+ */
+
+/* Book-3e defined page sizes */
+#define BOOK3E_PAGESZ_1K 0
+#define BOOK3E_PAGESZ_2K 1
+#define BOOK3E_PAGESZ_4K 2
+#define BOOK3E_PAGESZ_8K 3
+#define BOOK3E_PAGESZ_16K 4
+#define BOOK3E_PAGESZ_32K 5
+#define BOOK3E_PAGESZ_64K 6
+#define BOOK3E_PAGESZ_128K 7
+#define BOOK3E_PAGESZ_256K 8
+#define BOOK3E_PAGESZ_512K 9
+#define BOOK3E_PAGESZ_1M 10
+#define BOOK3E_PAGESZ_2M 11
+#define BOOK3E_PAGESZ_4M 12
+#define BOOK3E_PAGESZ_8M 13
+#define BOOK3E_PAGESZ_16M 14
+#define BOOK3E_PAGESZ_32M 15
+#define BOOK3E_PAGESZ_64M 16
+#define BOOK3E_PAGESZ_128M 17
+#define BOOK3E_PAGESZ_256M 18
+#define BOOK3E_PAGESZ_512M 19
+#define BOOK3E_PAGESZ_1GB 20
+#define BOOK3E_PAGESZ_2GB 21
+#define BOOK3E_PAGESZ_4GB 22
+#define BOOK3E_PAGESZ_8GB 23
+#define BOOK3E_PAGESZ_16GB 24
+#define BOOK3E_PAGESZ_32GB 25
+#define BOOK3E_PAGESZ_64GB 26
+#define BOOK3E_PAGESZ_128GB 27
+#define BOOK3E_PAGESZ_256GB 28
+#define BOOK3E_PAGESZ_512GB 29
+#define BOOK3E_PAGESZ_1TB 30
+#define BOOK3E_PAGESZ_2TB 31
+
+#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000)
+#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000)
+#define MAS0_NV(x) ((x) & 0x00000FFF)
+
+#define MAS1_VALID 0x80000000
+#define MAS1_IPROT 0x40000000
+#define MAS1_TID(x) ((x << 16) & 0x3FFF0000)
+#define MAS1_IND 0x00002000
+#define MAS1_TS 0x00001000
+#define MAS1_TSIZE(x) ((x << 7) & 0x00000F80)
+
+#define MAS2_EPN 0xFFFFF000
+#define MAS2_X0 0x00000040
+#define MAS2_X1 0x00000020
+#define MAS2_W 0x00000010
+#define MAS2_I 0x00000008
+#define MAS2_M 0x00000004
+#define MAS2_G 0x00000002
+#define MAS2_E 0x00000001
+#define MAS2_EPN_MASK(size) (~0 << (size + 10))
+#define MAS2_VAL(addr, size, flags) ((addr) & MAS2_EPN_MASK(size) | (flags))
+
+#define MAS3_RPN 0xFFFFF000
+#define MAS3_U0 0x00000200
+#define MAS3_U1 0x00000100
+#define MAS3_U2 0x00000080
+#define MAS3_U3 0x00000040
+#define MAS3_UX 0x00000020
+#define MAS3_SX 0x00000010
+#define MAS3_UW 0x00000008
+#define MAS3_SW 0x00000004
+#define MAS3_UR 0x00000002
+#define MAS3_SR 0x00000001
+
+#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
+#define MAS4_INDD 0x00008000
+#define MAS4_TSIZED(x) MAS1_TSIZE(x)
+#define MAS4_X0D 0x00000040
+#define MAS4_X1D 0x00000020
+#define MAS4_WD 0x00000010
+#define MAS4_ID 0x00000008
+#define MAS4_MD 0x00000004
+#define MAS4_GD 0x00000002
+#define MAS4_ED 0x00000001
+
+#define MAS6_SPID0 0x3FFF0000
+#define MAS6_SPID1 0x00007FFE
+#define MAS6_ISIZE(x) MAS1_TSIZE(x)
+#define MAS6_SAS 0x00000001
+#define MAS6_SPID MAS6_SPID0
+
+#define MAS7_RPN 0xFFFFFFFF
+
+#ifndef __ASSEMBLY__
+
+extern unsigned int tlbcam_index;
+
+typedef struct {
+ unsigned int id;
+ unsigned int active;
+ unsigned long vdso_base;
+} mm_context_t;
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_BOOK3E_H_ */
diff --git a/arch/powerpc/include/asm/mmu-fsl-booke.h b/arch/powerpc/include/asm/mmu-fsl-booke.h
deleted file mode 100644
index 4285b64..0000000
--- a/arch/powerpc/include/asm/mmu-fsl-booke.h
+++ /dev/null
@@ -1,87 +0,0 @@
-#ifndef _ASM_POWERPC_MMU_FSL_BOOKE_H_
-#define _ASM_POWERPC_MMU_FSL_BOOKE_H_
-/*
- * Freescale Book-E MMU support
- */
-
-/* Book-E defined page sizes */
-#define BOOKE_PAGESZ_1K 0
-#define BOOKE_PAGESZ_4K 1
-#define BOOKE_PAGESZ_16K 2
-#define BOOKE_PAGESZ_64K 3
-#define BOOKE_PAGESZ_256K 4
-#define BOOKE_PAGESZ_1M 5
-#define BOOKE_PAGESZ_4M 6
-#define BOOKE_PAGESZ_16M 7
-#define BOOKE_PAGESZ_64M 8
-#define BOOKE_PAGESZ_256M 9
-#define BOOKE_PAGESZ_1GB 10
-#define BOOKE_PAGESZ_4GB 11
-#define BOOKE_PAGESZ_16GB 12
-#define BOOKE_PAGESZ_64GB 13
-#define BOOKE_PAGESZ_256GB 14
-#define BOOKE_PAGESZ_1TB 15
-
-#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000)
-#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000)
-#define MAS0_NV(x) ((x) & 0x00000FFF)
-
-#define MAS1_VALID 0x80000000
-#define MAS1_IPROT 0x40000000
-#define MAS1_TID(x) ((x << 16) & 0x3FFF0000)
-#define MAS1_TS 0x00001000
-#define MAS1_TSIZE(x) ((x << 8) & 0x00000F00)
-
-#define MAS2_EPN 0xFFFFF000
-#define MAS2_X0 0x00000040
-#define MAS2_X1 0x00000020
-#define MAS2_W 0x00000010
-#define MAS2_I 0x00000008
-#define MAS2_M 0x00000004
-#define MAS2_G 0x00000002
-#define MAS2_E 0x00000001
-#define MAS2_EPN_MASK(size) (~0 << (2*(size) + 10))
-#define MAS2_VAL(addr, size, flags) ((addr) & MAS2_EPN_MASK(size) | (flags))
-
-#define MAS3_RPN 0xFFFFF000
-#define MAS3_U0 0x00000200
-#define MAS3_U1 0x00000100
-#define MAS3_U2 0x00000080
-#define MAS3_U3 0x00000040
-#define MAS3_UX 0x00000020
-#define MAS3_SX 0x00000010
-#define MAS3_UW 0x00000008
-#define MAS3_SW 0x00000004
-#define MAS3_UR 0x00000002
-#define MAS3_SR 0x00000001
-
-#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
-#define MAS4_TIDDSEL 0x000F0000
-#define MAS4_TSIZED(x) MAS1_TSIZE(x)
-#define MAS4_X0D 0x00000040
-#define MAS4_X1D 0x00000020
-#define MAS4_WD 0x00000010
-#define MAS4_ID 0x00000008
-#define MAS4_MD 0x00000004
-#define MAS4_GD 0x00000002
-#define MAS4_ED 0x00000001
-
-#define MAS6_SPID0 0x3FFF0000
-#define MAS6_SPID1 0x00007FFE
-#define MAS6_SAS 0x00000001
-#define MAS6_SPID MAS6_SPID0
-
-#define MAS7_RPN 0xFFFFFFFF
-
-#ifndef __ASSEMBLY__
-
-extern unsigned int tlbcam_index;
-
-typedef struct {
- unsigned int id;
- unsigned int active;
- unsigned long vdso_base;
-} mm_context_t;
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_MMU_FSL_BOOKE_H_ */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 68b7526..98c104a 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -284,8 +284,6 @@
unsigned long number_of_pages);
extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
-extern void htab_initialize(void);
-extern void htab_initialize_secondary(void);
extern void hpte_init_native(void);
extern void hpte_init_lpar(void);
extern void hpte_init_iSeries(void);
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 6e76399..cbf1543 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -36,9 +36,9 @@
*/
#define MMU_FTR_USE_TLBIVAX_BCAST ASM_CONST(0x00040000)
-/* Enable use of tlbilx invalidate-by-PID variant.
+/* Enable use of tlbilx invalidate instructions.
*/
-#define MMU_FTR_USE_TLBILX_PID ASM_CONST(0x00080000)
+#define MMU_FTR_USE_TLBILX ASM_CONST(0x00080000)
/* This indicates that the processor cannot handle multiple outstanding
* broadcast tlbivax or tlbsync. This makes the code use a spinlock
@@ -46,6 +46,12 @@
*/
#define MMU_FTR_LOCK_BCAST_INVAL ASM_CONST(0x00100000)
+/* This indicates that the processor doesn't handle way selection
+ * properly and needs SW to track and update the LRU state. This
+ * is specific to an errata on e300c2/c3/c4 class parts
+ */
+#define MMU_FTR_NEED_DTLB_SW_LRU ASM_CONST(0x00200000)
+
#ifndef __ASSEMBLY__
#include <asm/cputable.h>
@@ -56,6 +62,10 @@
extern unsigned int __start___mmu_ftr_fixup, __stop___mmu_ftr_fixup;
+/* MMU initialization (64-bit only fo now) */
+extern void early_init_mmu(void);
+extern void early_init_mmu_secondary(void);
+
#endif /* !__ASSEMBLY__ */
@@ -71,9 +81,9 @@
#elif defined(CONFIG_44x)
/* 44x-style software loaded TLB */
# include <asm/mmu-44x.h>
-#elif defined(CONFIG_FSL_BOOKE)
-/* Freescale Book-E software loaded TLB */
-# include <asm/mmu-fsl-booke.h>
+#elif defined(CONFIG_PPC_BOOK3E_MMU)
+/* Freescale Book-E software loaded TLB or Book-3e (ISA 2.06+) MMU */
+# include <asm/mmu-book3e.h>
#elif defined (CONFIG_PPC_8xx)
/* Motorola/Freescale 8xx software loaded TLB */
# include <asm/mmu-8xx.h>
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index ab4f192..b706366 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -31,7 +31,7 @@
struct task_struct *tsk)
{
/* Mark this context has been used on the new CPU */
- cpu_set(smp_processor_id(), next->cpu_vm_mask);
+ cpumask_set_cpu(smp_processor_id(), mm_cpumask(next));
/* 32-bit keeps track of the current PGDIR in the thread struct */
#ifdef CONFIG_PPC32
diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h
index 81a2393..52e049c 100644
--- a/arch/powerpc/include/asm/mpc52xx.h
+++ b/arch/powerpc/include/asm/mpc52xx.h
@@ -273,6 +273,7 @@
extern void mpc52xx_declare_of_platform_devices(void);
extern void mpc52xx_map_common_devices(void);
extern int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv);
+extern unsigned int mpc52xx_get_xtal_freq(struct device_node *node);
extern void mpc52xx_restart(char *cmd);
/* mpc52xx_pic.c */
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 197d569..32cbf16 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -19,12 +19,14 @@
#include <asm/kdump.h>
/*
- * On regular PPC32 page size is 4K (but we support 4K/16K/64K pages
+ * On regular PPC32 page size is 4K (but we support 4K/16K/64K/256K pages
* on PPC44x). For PPC64 we support either 4K or 64K software
* page size. When using 64K pages however, whether we are really supporting
* 64K pages in HW or not is irrelevant to those definitions.
*/
-#if defined(CONFIG_PPC_64K_PAGES)
+#if defined(CONFIG_PPC_256K_PAGES)
+#define PAGE_SHIFT 18
+#elif defined(CONFIG_PPC_64K_PAGES)
#define PAGE_SHIFT 16
#elif defined(CONFIG_PPC_16K_PAGES)
#define PAGE_SHIFT 14
diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h
index 1458d95..a0e3f6e 100644
--- a/arch/powerpc/include/asm/page_32.h
+++ b/arch/powerpc/include/asm/page_32.h
@@ -19,7 +19,11 @@
#define PTE_FLAGS_OFFSET 0
#endif
+#ifdef CONFIG_PPC_256K_PAGES
+#define PTE_SHIFT (PAGE_SHIFT - PTE_T_LOG2 - 2) /* 1/4 of a page */
+#else
#define PTE_SHIFT (PAGE_SHIFT - PTE_T_LOG2) /* full page */
+#endif
#ifndef __ASSEMBLY__
/*
diff --git a/arch/powerpc/include/asm/pgtable-4k.h b/arch/powerpc/include/asm/pgtable-4k.h
deleted file mode 100644
index 1dbca4e7..0000000
--- a/arch/powerpc/include/asm/pgtable-4k.h
+++ /dev/null
@@ -1,117 +0,0 @@
-#ifndef _ASM_POWERPC_PGTABLE_4K_H
-#define _ASM_POWERPC_PGTABLE_4K_H
-/*
- * Entries per page directory level. The PTE level must use a 64b record
- * for each page table entry. The PMD and PGD level use a 32b record for
- * each entry by assuming that each entry is page aligned.
- */
-#define PTE_INDEX_SIZE 9
-#define PMD_INDEX_SIZE 7
-#define PUD_INDEX_SIZE 7
-#define PGD_INDEX_SIZE 9
-
-#ifndef __ASSEMBLY__
-#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_INDEX_SIZE)
-#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE)
-#define PUD_TABLE_SIZE (sizeof(pud_t) << PUD_INDEX_SIZE)
-#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE)
-#endif /* __ASSEMBLY__ */
-
-#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE)
-#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE)
-#define PTRS_PER_PUD (1 << PMD_INDEX_SIZE)
-#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE)
-
-/* PMD_SHIFT determines what a second-level page table entry can map */
-#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE)
-#define PMD_SIZE (1UL << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE-1))
-
-/* With 4k base page size, hugepage PTEs go at the PMD level */
-#define MIN_HUGEPTE_SHIFT PMD_SHIFT
-
-/* PUD_SHIFT determines what a third-level page table entry can map */
-#define PUD_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE)
-#define PUD_SIZE (1UL << PUD_SHIFT)
-#define PUD_MASK (~(PUD_SIZE-1))
-
-/* PGDIR_SHIFT determines what a fourth-level page table entry can map */
-#define PGDIR_SHIFT (PUD_SHIFT + PUD_INDEX_SIZE)
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE-1))
-
-/* PTE bits */
-#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */
-#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */
-#define _PAGE_GROUP_IX 0x7000 /* software: HPTE index within group */
-#define _PAGE_F_SECOND _PAGE_SECONDARY
-#define _PAGE_F_GIX _PAGE_GROUP_IX
-#define _PAGE_SPECIAL 0x10000 /* software: special page */
-#define __HAVE_ARCH_PTE_SPECIAL
-
-/* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
- _PAGE_SECONDARY | _PAGE_GROUP_IX)
-
-/* There is no 4K PFN hack on 4K pages */
-#define _PAGE_4K_PFN 0
-
-/* PAGE_MASK gives the right answer below, but only by accident */
-/* It should be preserving the high 48 bits and then specifically */
-/* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */
-#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
- _PAGE_HPTEFLAGS | _PAGE_SPECIAL)
-
-/* Bits to mask out from a PMD to get to the PTE page */
-#define PMD_MASKED_BITS 0
-/* Bits to mask out from a PUD to get to the PMD page */
-#define PUD_MASKED_BITS 0
-/* Bits to mask out from a PGD to get to the PUD page */
-#define PGD_MASKED_BITS 0
-
-/* shift to put page number into pte */
-#define PTE_RPN_SHIFT (17)
-
-#ifdef STRICT_MM_TYPECHECKS
-#define __real_pte(e,p) ((real_pte_t){(e)})
-#define __rpte_to_pte(r) ((r).pte)
-#else
-#define __real_pte(e,p) (e)
-#define __rpte_to_pte(r) (__pte(r))
-#endif
-#define __rpte_to_hidx(r,index) (pte_val(__rpte_to_pte(r)) >> 12)
-
-#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \
- do { \
- index = 0; \
- shift = mmu_psize_defs[psize].shift; \
-
-#define pte_iterate_hashed_end() } while(0)
-
-#ifdef CONFIG_PPC_HAS_HASH_64K
-#define pte_pagesize_index(mm, addr, pte) get_slice_psize(mm, addr)
-#else
-#define pte_pagesize_index(mm, addr, pte) MMU_PAGE_4K
-#endif
-
-/*
- * 4-level page tables related bits
- */
-
-#define pgd_none(pgd) (!pgd_val(pgd))
-#define pgd_bad(pgd) (pgd_val(pgd) == 0)
-#define pgd_present(pgd) (pgd_val(pgd) != 0)
-#define pgd_clear(pgdp) (pgd_val(*(pgdp)) = 0)
-#define pgd_page_vaddr(pgd) (pgd_val(pgd) & ~PGD_MASKED_BITS)
-#define pgd_page(pgd) virt_to_page(pgd_page_vaddr(pgd))
-
-#define pud_offset(pgdp, addr) \
- (((pud_t *) pgd_page_vaddr(*(pgdp))) + \
- (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
-
-#define pud_ERROR(e) \
- printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
-
-#define remap_4k_pfn(vma, addr, pfn, prot) \
- remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot))
-#endif /* _ASM_POWERPC_PGTABLE_4K_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index 820b5f0..ba45c99 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -19,55 +19,6 @@
#endif /* __ASSEMBLY__ */
/*
- * The PowerPC MMU uses a hash table containing PTEs, together with
- * a set of 16 segment registers (on 32-bit implementations), to define
- * the virtual to physical address mapping.
- *
- * We use the hash table as an extended TLB, i.e. a cache of currently
- * active mappings. We maintain a two-level page table tree, much
- * like that used by the i386, for the sake of the Linux memory
- * management code. Low-level assembler code in hashtable.S
- * (procedure hash_page) is responsible for extracting ptes from the
- * tree and putting them into the hash table when necessary, and
- * updating the accessed and modified bits in the page table tree.
- */
-
-/*
- * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
- * We also use the two level tables, but we can put the real bits in them
- * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0,
- * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has
- * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
- * based upon user/super access. The TLB does not have accessed nor write
- * protect. We assume that if the TLB get loaded with an entry it is
- * accessed, and overload the changed bit for write protect. We use
- * two bits in the software pte that are supposed to be set to zero in
- * the TLB entry (24 and 25) for these indicators. Although the level 1
- * descriptor contains the guarded and writethrough/copyback bits, we can
- * set these at the page level since they get copied from the Mx_TWC
- * register when the TLB entry is loaded. We will use bit 27 for guard, since
- * that is where it exists in the MD_TWC, and bit 26 for writethrough.
- * These will get masked from the level 2 descriptor at TLB load time, and
- * copied to the MD_TWC before it gets loaded.
- * Large page sizes added. We currently support two sizes, 4K and 8M.
- * This also allows a TLB hander optimization because we can directly
- * load the PMD into MD_TWC. The 8M pages are only used for kernel
- * mapping of well known areas. The PMD (PGD) entries contain control
- * flags in addition to the address, so care must be taken that the
- * software no longer assumes these are only pointers.
- */
-
-/*
- * At present, all PowerPC 400-class processors share a similar TLB
- * architecture. The instruction and data sides share a unified,
- * 64-entry, fully-associative TLB which is maintained totally under
- * software control. In addition, the instruction side has a
- * hardware-managed, 4-entry, fully-associative TLB which serves as a
- * first level to the shared TLB. These two TLBs are known as the UTLB
- * and ITLB, respectively (see "mmu.h" for definitions).
- */
-
-/*
* The normal case is that PTEs are 32-bits and we have a 1-page
* 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus
*
@@ -135,409 +86,22 @@
*/
#if defined(CONFIG_40x)
-
-/* There are several potential gotchas here. The 40x hardware TLBLO
- field looks like this:
-
- 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- RPN..................... 0 0 EX WR ZSEL....... W I M G
-
- Where possible we make the Linux PTE bits match up with this
-
- - bits 20 and 21 must be cleared, because we use 4k pages (40x can
- support down to 1k pages), this is done in the TLBMiss exception
- handler.
- - We use only zones 0 (for kernel pages) and 1 (for user pages)
- of the 16 available. Bit 24-26 of the TLB are cleared in the TLB
- miss handler. Bit 27 is PAGE_USER, thus selecting the correct
- zone.
- - PRESENT *must* be in the bottom two bits because swap cache
- entries use the top 30 bits. Because 40x doesn't support SMP
- anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30
- is cleared in the TLB miss handler before the TLB entry is loaded.
- - All other bits of the PTE are loaded into TLBLO without
- modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
- software PTE bits. We actually use use bits 21, 24, 25, and
- 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
- PRESENT.
-*/
-
-/* Definitions for 40x embedded chips. */
-#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
-#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */
-#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
-#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
-#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
-#define _PAGE_USER 0x010 /* matches one of the zone permission bits */
-#define _PAGE_RW 0x040 /* software: Writes permitted */
-#define _PAGE_DIRTY 0x080 /* software: dirty page */
-#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
-#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */
-#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
-
-#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */
-#define _PMD_BAD 0x802
-#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */
-#define _PMD_SIZE_4M 0x0c0
-#define _PMD_SIZE_16M 0x0e0
-#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4))
-
-/* Until my rework is finished, 40x still needs atomic PTE updates */
-#define PTE_ATOMIC_UPDATES 1
-
+#include <asm/pte-40x.h>
#elif defined(CONFIG_44x)
-/*
- * Definitions for PPC440
- *
- * Because of the 3 word TLB entries to support 36-bit addressing,
- * the attribute are difficult to map in such a fashion that they
- * are easily loaded during exception processing. I decided to
- * organize the entry so the ERPN is the only portion in the
- * upper word of the PTE and the attribute bits below are packed
- * in as sensibly as they can be in the area below a 4KB page size
- * oriented RPN. This at least makes it easy to load the RPN and
- * ERPN fields in the TLB. -Matt
- *
- * Note that these bits preclude future use of a page size
- * less than 4KB.
- *
- *
- * PPC 440 core has following TLB attribute fields;
- *
- * TLB1:
- * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- * RPN................................. - - - - - - ERPN.......
- *
- * TLB2:
- * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR
- *
- * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional
- * TLB2 storage attibute fields. Those are:
- *
- * TLB2:
- * 0...10 11 12 13 14 15 16...31
- * no change WL1 IL1I IL1D IL2I IL2D no change
- *
- * There are some constrains and options, to decide mapping software bits
- * into TLB entry.
- *
- * - PRESENT *must* be in the bottom three bits because swap cache
- * entries use the top 29 bits for TLB2.
- *
- * - FILE *must* be in the bottom three bits because swap cache
- * entries use the top 29 bits for TLB2.
- *
- * - CACHE COHERENT bit (M) has no effect on original PPC440 cores,
- * because it doesn't support SMP. However, some later 460 variants
- * have -some- form of SMP support and so I keep the bit there for
- * future use
- *
- * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
- * for memory protection related functions (see PTE structure in
- * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the
- * above bits. Note that the bit values are CPU specific, not architecture
- * specific.
- *
- * The kernel PTE entry holds an arch-dependent swp_entry structure under
- * certain situations. In other words, in such situations some portion of
- * the PTE bits are used as a swp_entry. In the PPC implementation, the
- * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still
- * hold protection values. That means the three protection bits are
- * reserved for both PTE and SWAP entry at the most significant three
- * LSBs.
- *
- * There are three protection bits available for SWAP entry:
- * _PAGE_PRESENT
- * _PAGE_FILE
- * _PAGE_HASHPTE (if HW has)
- *
- * So those three bits have to be inside of 0-2nd LSB of PTE.
- *
- */
-
-#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */
-#define _PAGE_RW 0x00000002 /* S: Write permission */
-#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */
-#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */
-#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */
-#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */
-#define _PAGE_SPECIAL 0x00000020 /* S: Special page */
-#define _PAGE_USER 0x00000040 /* S: User page */
-#define _PAGE_ENDIAN 0x00000080 /* H: E bit */
-#define _PAGE_GUARDED 0x00000100 /* H: G bit */
-#define _PAGE_COHERENT 0x00000200 /* H: M bit */
-#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */
-#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */
-
-/* TODO: Add large page lowmem mapping support */
-#define _PMD_PRESENT 0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD (~PAGE_MASK)
-
-/* ERPN in a PTE never gets cleared, ignore it */
-#define _PTE_NONE_MASK 0xffffffff00000000ULL
-
-#define __HAVE_ARCH_PTE_SPECIAL
-
+#include <asm/pte-44x.h>
#elif defined(CONFIG_FSL_BOOKE)
-/*
- MMU Assist Register 3:
-
- 32 33 34 35 36 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63
- RPN...................... 0 0 U0 U1 U2 U3 UX SX UW SW UR SR
-
- - PRESENT *must* be in the bottom three bits because swap cache
- entries use the top 29 bits.
-
- - FILE *must* be in the bottom three bits because swap cache
- entries use the top 29 bits.
-*/
-
-/* Definitions for FSL Book-E Cores */
-#define _PAGE_PRESENT 0x00001 /* S: PTE contains a translation */
-#define _PAGE_USER 0x00002 /* S: User page (maps to UR) */
-#define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */
-#define _PAGE_RW 0x00004 /* S: Write permission (SW) */
-#define _PAGE_DIRTY 0x00008 /* S: Page dirty */
-#define _PAGE_HWEXEC 0x00010 /* H: SX permission */
-#define _PAGE_ACCESSED 0x00020 /* S: Page referenced */
-
-#define _PAGE_ENDIAN 0x00040 /* H: E bit */
-#define _PAGE_GUARDED 0x00080 /* H: G bit */
-#define _PAGE_COHERENT 0x00100 /* H: M bit */
-#define _PAGE_NO_CACHE 0x00200 /* H: I bit */
-#define _PAGE_WRITETHRU 0x00400 /* H: W bit */
-#define _PAGE_SPECIAL 0x00800 /* S: Special page */
-
-#ifdef CONFIG_PTE_64BIT
-/* ERPN in a PTE never gets cleared, ignore it */
-#define _PTE_NONE_MASK 0xffffffffffff0000ULL
-#endif
-
-#define _PMD_PRESENT 0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD (~PAGE_MASK)
-
-#define __HAVE_ARCH_PTE_SPECIAL
-
+#include <asm/pte-fsl-booke.h>
#elif defined(CONFIG_8xx)
-/* Definitions for 8xx embedded chips. */
-#define _PAGE_PRESENT 0x0001 /* Page is valid */
-#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */
-#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */
-#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */
-
-/* These five software bits must be masked out when the entry is loaded
- * into the TLB.
- */
-#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */
-#define _PAGE_GUARDED 0x0010 /* software: guarded access */
-#define _PAGE_DIRTY 0x0020 /* software: page changed */
-#define _PAGE_RW 0x0040 /* software: user write access allowed */
-#define _PAGE_ACCESSED 0x0080 /* software: page referenced */
-
-/* Setting any bits in the nibble with the follow two controls will
- * require a TLB exception handler change. It is assumed unused bits
- * are always zero.
- */
-#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */
-#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */
-
-#define _PMD_PRESENT 0x0001
-#define _PMD_BAD 0x0ff0
-#define _PMD_PAGE_MASK 0x000c
-#define _PMD_PAGE_8M 0x000c
-
-#define _PTE_NONE_MASK _PAGE_ACCESSED
-
-/* Until my rework is finished, 8xx still needs atomic PTE updates */
-#define PTE_ATOMIC_UPDATES 1
-
+#include <asm/pte-8xx.h>
#else /* CONFIG_6xx */
-/* Definitions for 60x, 740/750, etc. */
-#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */
-#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */
-#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */
-#define _PAGE_USER 0x004 /* usermode access allowed */
-#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */
-#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */
-#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */
-#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */
-#define _PAGE_DIRTY 0x080 /* C: page changed */
-#define _PAGE_ACCESSED 0x100 /* R: page referenced */
-#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */
-#define _PAGE_RW 0x400 /* software: user write access allowed */
-#define _PAGE_SPECIAL 0x800 /* software: Special page */
-
-#ifdef CONFIG_PTE_64BIT
-/* We never clear the high word of the pte */
-#define _PTE_NONE_MASK (0xffffffff00000000ULL | _PAGE_HASHPTE)
-#else
-#define _PTE_NONE_MASK _PAGE_HASHPTE
+#include <asm/pte-hash32.h>
#endif
-#define _PMD_PRESENT 0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD (~PAGE_MASK)
-
-/* Hash table based platforms need atomic updates of the linux PTE */
-#define PTE_ATOMIC_UPDATES 1
-
-#define __HAVE_ARCH_PTE_SPECIAL
-
-#endif
-
-/*
- * Some bits are only used on some cpu families...
- */
-#ifndef _PAGE_HASHPTE
-#define _PAGE_HASHPTE 0
-#endif
-#ifndef _PTE_NONE_MASK
-#define _PTE_NONE_MASK 0
-#endif
-#ifndef _PAGE_SHARED
-#define _PAGE_SHARED 0
-#endif
-#ifndef _PAGE_HWWRITE
-#define _PAGE_HWWRITE 0
-#endif
-#ifndef _PAGE_HWEXEC
-#define _PAGE_HWEXEC 0
-#endif
-#ifndef _PAGE_EXEC
-#define _PAGE_EXEC 0
-#endif
-#ifndef _PAGE_ENDIAN
-#define _PAGE_ENDIAN 0
-#endif
-#ifndef _PAGE_COHERENT
-#define _PAGE_COHERENT 0
-#endif
-#ifndef _PAGE_WRITETHRU
-#define _PAGE_WRITETHRU 0
-#endif
-#ifndef _PAGE_SPECIAL
-#define _PAGE_SPECIAL 0
-#endif
-#ifndef _PMD_PRESENT_MASK
-#define _PMD_PRESENT_MASK _PMD_PRESENT
-#endif
-#ifndef _PMD_SIZE
-#define _PMD_SIZE 0
-#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE()
-#endif
-
-#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
- _PAGE_SPECIAL)
-
-
-#define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
- _PAGE_WRITETHRU | _PAGE_ENDIAN | \
- _PAGE_USER | _PAGE_ACCESSED | \
- _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
- _PAGE_EXEC | _PAGE_HWEXEC)
-
-/*
- * We define 2 sets of base prot bits, one for basic pages (ie,
- * cacheable kernel and user pages) and one for non cacheable
- * pages. We always set _PAGE_COHERENT when SMP is enabled or
- * the processor might need it for DMA coherency.
- */
-#if defined(CONFIG_SMP) || defined(CONFIG_PPC_STD_MMU)
-#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT)
-#else
-#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED)
-#endif
-#define _PAGE_BASE_NC (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_NO_CACHE)
-
-#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
-#define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE)
-#define _PAGE_KERNEL_NC (_PAGE_BASE_NC | _PAGE_SHARED | _PAGE_WRENABLE)
-
-#ifdef CONFIG_PPC_STD_MMU
-/* On standard PPC MMU, no user access implies kernel read/write access,
- * so to write-protect kernel memory we must turn on user access */
-#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED | _PAGE_USER)
-#else
-#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED)
-#endif
-
-#define _PAGE_IO (_PAGE_KERNEL_NC | _PAGE_GUARDED)
-#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC)
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
- defined(CONFIG_KPROBES)
-/* We want the debuggers to be able to set breakpoints anywhere, so
- * don't write protect the kernel text */
-#define _PAGE_RAM_TEXT _PAGE_RAM
-#else
-#define _PAGE_RAM_TEXT (_PAGE_KERNEL_RO | _PAGE_HWEXEC)
-#endif
-
-#define PAGE_NONE __pgprot(_PAGE_BASE)
-#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
-#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
-#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-
-#define PAGE_KERNEL __pgprot(_PAGE_RAM)
-#define PAGE_KERNEL_NOCACHE __pgprot(_PAGE_IO)
-
-/*
- * The PowerPC can only do execute protection on a segment (256MB) basis,
- * not on a page basis. So we consider execute permission the same as read.
- * Also, write permissions imply read permissions.
- * This is the closest we can get..
- */
-#define __P000 PAGE_NONE
-#define __P001 PAGE_READONLY_X
-#define __P010 PAGE_COPY
-#define __P011 PAGE_COPY_X
-#define __P100 PAGE_READONLY
-#define __P101 PAGE_READONLY_X
-#define __P110 PAGE_COPY
-#define __P111 PAGE_COPY_X
-
-#define __S000 PAGE_NONE
-#define __S001 PAGE_READONLY_X
-#define __S010 PAGE_SHARED
-#define __S011 PAGE_SHARED_X
-#define __S100 PAGE_READONLY
-#define __S101 PAGE_READONLY_X
-#define __S110 PAGE_SHARED
-#define __S111 PAGE_SHARED_X
+/* And here we include common definitions */
+#include <asm/pte-common.h>
#ifndef __ASSEMBLY__
-/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a
- * kernel without large page PMD support */
-extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
-/*
- * Conversions between PTE values and page frame numbers.
- */
-
-/* in some case we want to additionaly adjust where the pfn is in the pte to
- * allow room for more flags */
-#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
-#define PFN_SHIFT_OFFSET (PAGE_SHIFT + 8)
-#else
-#define PFN_SHIFT_OFFSET (PAGE_SHIFT)
-#endif
-
-#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET)
-#define pte_page(x) pfn_to_page(pte_pfn(x))
-
-#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\
- pgprot_val(prot))
-#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
-#endif /* __ASSEMBLY__ */
-
-#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
-#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
#define pte_clear(mm, addr, ptep) \
do { pte_update(ptep, ~_PAGE_HASHPTE, 0); } while (0)
@@ -546,43 +110,6 @@
#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK)
#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0)
-#ifndef __ASSEMBLY__
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
-static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
-static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; }
-
-static inline pte_t pte_wrprotect(pte_t pte) {
- pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
-static inline pte_t pte_mkclean(pte_t pte) {
- pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
-static inline pte_t pte_mkold(pte_t pte) {
- pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-
-static inline pte_t pte_mkwrite(pte_t pte) {
- pte_val(pte) |= _PAGE_RW; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) {
- pte_val(pte) |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) {
- pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkspecial(pte_t pte) {
- pte_val(pte) |= _PAGE_SPECIAL; return pte; }
-static inline pgprot_t pte_pgprot(pte_t pte)
-{
- return __pgprot(pte_val(pte) & PAGE_PROT_BITS);
-}
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
- pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
- return pte;
-}
-
/*
* When flushing the tlb entry for a page, we also need to flush the hash
* table entry. flush_hash_pages is assembler (for speed) in hashtable.S.
@@ -599,11 +126,19 @@
unsigned long address);
/*
- * Atomic PTE updates.
+ * PTE updates. This function is called whenever an existing
+ * valid PTE is updated. This does -not- include set_pte_at()
+ * which nowadays only sets a new PTE.
*
- * pte_update clears and sets bit atomically, and returns
- * the old pte value. In the 64-bit PTE case we lock around the
- * low PTE word since we expect ALL flag bits to be there
+ * Depending on the type of MMU, we may need to use atomic updates
+ * and the PTE may be either 32 or 64 bit wide. In the later case,
+ * when using atomic updates, only the low part of the PTE is
+ * accessed atomically.
+ *
+ * In addition, on 44x, we also maintain a global flag indicating
+ * that an executable user mapping was modified, which is needed
+ * to properly flush the virtually tagged instruction cache of
+ * those implementations.
*/
#ifndef CONFIG_PTE_64BIT
static inline unsigned long pte_update(pte_t *p,
@@ -668,44 +203,6 @@
#endif /* CONFIG_PTE_64BIT */
/*
- * set_pte stores a linux PTE into the linux page table.
- * On machines which use an MMU hash table we avoid changing the
- * _PAGE_HASHPTE bit.
- */
-
-static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pte)
-{
-#if (_PAGE_HASHPTE != 0) && defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT)
- pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
-#elif defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP)
-#if _PAGE_HASHPTE != 0
- if (pte_val(*ptep) & _PAGE_HASHPTE)
- flush_hash_entry(mm, ptep, addr);
-#endif
- __asm__ __volatile__("\
- stw%U0%X0 %2,%0\n\
- eieio\n\
- stw%U0%X0 %L2,%1"
- : "=m" (*ptep), "=m" (*((unsigned char *)ptep+4))
- : "r" (pte) : "memory");
-#else
- *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
- | (pte_val(pte) & ~_PAGE_HASHPTE));
-#endif
-}
-
-
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pte)
-{
-#if defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP) && defined(CONFIG_DEBUG_VM)
- WARN_ON(pte_present(*ptep));
-#endif
- __set_pte_at(mm, addr, ptep, pte);
-}
-
-/*
* 2.6 calls this without flushing the TLB entry; this is wrong
* for our hash-based implementation, we fix that up here.
*/
@@ -745,24 +242,14 @@
}
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
{
unsigned long bits = pte_val(entry) &
- (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW);
+ (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW |
+ _PAGE_HWEXEC | _PAGE_EXEC);
pte_update(ptep, 0, bits);
}
-#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
-({ \
- int __changed = !pte_same(*(__ptep), __entry); \
- if (__changed) { \
- __ptep_set_access_flags(__ptep, __entry, __dirty); \
- flush_tlb_page_nohash(__vma, __address); \
- } \
- __changed; \
-})
-
#define __HAVE_ARCH_PTE_SAME
#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
diff --git a/arch/powerpc/include/asm/pgtable-ppc64-4k.h b/arch/powerpc/include/asm/pgtable-ppc64-4k.h
new file mode 100644
index 0000000..6eefdcf
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-ppc64-4k.h
@@ -0,0 +1,74 @@
+#ifndef _ASM_POWERPC_PGTABLE_PPC64_4K_H
+#define _ASM_POWERPC_PGTABLE_PPC64_4K_H
+/*
+ * Entries per page directory level. The PTE level must use a 64b record
+ * for each page table entry. The PMD and PGD level use a 32b record for
+ * each entry by assuming that each entry is page aligned.
+ */
+#define PTE_INDEX_SIZE 9
+#define PMD_INDEX_SIZE 7
+#define PUD_INDEX_SIZE 7
+#define PGD_INDEX_SIZE 9
+
+#ifndef __ASSEMBLY__
+#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_INDEX_SIZE)
+#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE)
+#define PUD_TABLE_SIZE (sizeof(pud_t) << PUD_INDEX_SIZE)
+#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE)
+#endif /* __ASSEMBLY__ */
+
+#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE)
+#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PUD (1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE)
+
+/* PMD_SHIFT determines what a second-level page table entry can map */
+#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE)
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE-1))
+
+/* With 4k base page size, hugepage PTEs go at the PMD level */
+#define MIN_HUGEPTE_SHIFT PMD_SHIFT
+
+/* PUD_SHIFT determines what a third-level page table entry can map */
+#define PUD_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE)
+#define PUD_SIZE (1UL << PUD_SHIFT)
+#define PUD_MASK (~(PUD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a fourth-level page table entry can map */
+#define PGDIR_SHIFT (PUD_SHIFT + PUD_INDEX_SIZE)
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+/* Bits to mask out from a PMD to get to the PTE page */
+#define PMD_MASKED_BITS 0
+/* Bits to mask out from a PUD to get to the PMD page */
+#define PUD_MASKED_BITS 0
+/* Bits to mask out from a PGD to get to the PUD page */
+#define PGD_MASKED_BITS 0
+
+
+/*
+ * 4-level page tables related bits
+ */
+
+#define pgd_none(pgd) (!pgd_val(pgd))
+#define pgd_bad(pgd) (pgd_val(pgd) == 0)
+#define pgd_present(pgd) (pgd_val(pgd) != 0)
+#define pgd_clear(pgdp) (pgd_val(*(pgdp)) = 0)
+#define pgd_page_vaddr(pgd) (pgd_val(pgd) & ~PGD_MASKED_BITS)
+#define pgd_page(pgd) virt_to_page(pgd_page_vaddr(pgd))
+
+#define pud_offset(pgdp, addr) \
+ (((pud_t *) pgd_page_vaddr(*(pgdp))) + \
+ (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
+
+#define pud_ERROR(e) \
+ printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
+
+/*
+ * On all 4K setups, remap_4k_pfn() equates to remap_pfn_range() */
+#define remap_4k_pfn(vma, addr, pfn, prot) \
+ remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot))
+
+#endif /* _ASM_POWERPC_PGTABLE_PPC64_4K_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc64-64k.h b/arch/powerpc/include/asm/pgtable-ppc64-64k.h
new file mode 100644
index 0000000..6cc085b
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-ppc64-64k.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_POWERPC_PGTABLE_PPC64_64K_H
+#define _ASM_POWERPC_PGTABLE_PPC64_64K_H
+
+#include <asm-generic/pgtable-nopud.h>
+
+
+#define PTE_INDEX_SIZE 12
+#define PMD_INDEX_SIZE 12
+#define PUD_INDEX_SIZE 0
+#define PGD_INDEX_SIZE 4
+
+#ifndef __ASSEMBLY__
+
+#define PTE_TABLE_SIZE (sizeof(real_pte_t) << PTE_INDEX_SIZE)
+#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE)
+#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE)
+
+#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE)
+#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE)
+
+/* With 4k base page size, hugepage PTEs go at the PMD level */
+#define MIN_HUGEPTE_SHIFT PAGE_SHIFT
+
+/* PMD_SHIFT determines what a second-level page table entry can map */
+#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE)
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE)
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+#endif /* __ASSEMBLY__ */
+
+/* Bits to mask out from a PMD to get to the PTE page */
+#define PMD_MASKED_BITS 0x1ff
+/* Bits to mask out from a PGD/PUD to get to the PMD page */
+#define PUD_MASKED_BITS 0x1ff
+
+#endif /* _ASM_POWERPC_PGTABLE_PPC64_64K_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index b0f18be..c40db05 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -11,9 +11,9 @@
#endif /* __ASSEMBLY__ */
#ifdef CONFIG_PPC_64K_PAGES
-#include <asm/pgtable-64k.h>
+#include <asm/pgtable-ppc64-64k.h>
#else
-#include <asm/pgtable-4k.h>
+#include <asm/pgtable-ppc64-4k.h>
#endif
#define FIRST_USER_ADDRESS 0
@@ -25,6 +25,8 @@
PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT)
#define PGTABLE_RANGE (ASM_CONST(1) << PGTABLE_EADDR_SIZE)
+
+/* Some sanity checking */
#if TASK_SIZE_USER64 > PGTABLE_RANGE
#error TASK_SIZE_USER64 exceeds pagetable range
#endif
@@ -33,7 +35,6 @@
#error TASK_SIZE_USER64 exceeds user VSID range
#endif
-
/*
* Define the address range of the vmalloc VM area.
*/
@@ -76,82 +77,11 @@
/*
- * Common bits in a linux-style PTE. These match the bits in the
- * (hardware-defined) PowerPC PTE as closely as possible. Additional
- * bits may be defined in pgtable-*.h
+ * Include the PTE bits definitions
*/
-#define _PAGE_PRESENT 0x0001 /* software: pte contains a translation */
-#define _PAGE_USER 0x0002 /* matches one of the PP bits */
-#define _PAGE_FILE 0x0002 /* (!present only) software: pte holds file offset */
-#define _PAGE_EXEC 0x0004 /* No execute on POWER4 and newer (we invert) */
-#define _PAGE_GUARDED 0x0008
-#define _PAGE_COHERENT 0x0010 /* M: enforce memory coherence (SMP systems) */
-#define _PAGE_NO_CACHE 0x0020 /* I: cache inhibit */
-#define _PAGE_WRITETHRU 0x0040 /* W: cache write-through */
-#define _PAGE_DIRTY 0x0080 /* C: page changed */
-#define _PAGE_ACCESSED 0x0100 /* R: page referenced */
-#define _PAGE_RW 0x0200 /* software: user write access allowed */
-#define _PAGE_BUSY 0x0800 /* software: PTE & hash are busy */
+#include <asm/pte-hash64.h>
+#include <asm/pte-common.h>
-/* Strong Access Ordering */
-#define _PAGE_SAO (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT)
-
-#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT)
-
-#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY)
-
-/* __pgprot defined in arch/powerpc/include/asm/page.h */
-#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
-
-#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER)
-#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_KERNEL __pgprot(_PAGE_BASE | _PAGE_WRENABLE)
-#define PAGE_KERNEL_CI __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_WRENABLE | _PAGE_NO_CACHE | _PAGE_GUARDED)
-#define PAGE_KERNEL_EXEC __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_EXEC)
-
-#define PAGE_AGP __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE)
-#define HAVE_PAGE_AGP
-
-#define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | \
- _PAGE_NO_CACHE | _PAGE_WRITETHRU | \
- _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \
- _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC)
-/* PTEIDX nibble */
-#define _PTEIDX_SECONDARY 0x8
-#define _PTEIDX_GROUP_IX 0x7
-
-
-/*
- * POWER4 and newer have per page execute protection, older chips can only
- * do this on a segment (256MB) basis.
- *
- * Also, write permissions imply read permissions.
- * This is the closest we can get..
- *
- * Note due to the way vm flags are laid out, the bits are XWR
- */
-#define __P000 PAGE_NONE
-#define __P001 PAGE_READONLY
-#define __P010 PAGE_COPY
-#define __P011 PAGE_COPY
-#define __P100 PAGE_READONLY_X
-#define __P101 PAGE_READONLY_X
-#define __P110 PAGE_COPY_X
-#define __P111 PAGE_COPY_X
-
-#define __S000 PAGE_NONE
-#define __S001 PAGE_READONLY
-#define __S010 PAGE_SHARED
-#define __S011 PAGE_SHARED
-#define __S100 PAGE_READONLY_X
-#define __S101 PAGE_READONLY_X
-#define __S110 PAGE_SHARED_X
-#define __S111 PAGE_SHARED_X
#ifdef CONFIG_PPC_MM_SLICES
#define HAVE_ARCH_UNMAPPED_AREA
@@ -161,33 +91,39 @@
#ifndef __ASSEMBLY__
/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- *
- * mk_pte takes a (struct page *) as input
+ * This is the default implementation of various PTE accessors, it's
+ * used in all cases except Book3S with 64K pages where we have a
+ * concept of sub-pages
*/
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+#ifndef __real_pte
-static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
-{
- pte_t pte;
+#ifdef STRICT_MM_TYPECHECKS
+#define __real_pte(e,p) ((real_pte_t){(e)})
+#define __rpte_to_pte(r) ((r).pte)
+#else
+#define __real_pte(e,p) (e)
+#define __rpte_to_pte(r) (__pte(r))
+#endif
+#define __rpte_to_hidx(r,index) (pte_val(__rpte_to_pte(r)) >> 12)
+#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \
+ do { \
+ index = 0; \
+ shift = mmu_psize_defs[psize].shift; \
- pte_val(pte) = (pfn << PTE_RPN_SHIFT) | pgprot_val(pgprot);
- return pte;
-}
+#define pte_iterate_hashed_end() } while(0)
-#define pte_modify(_pte, newprot) \
- (__pte((pte_val(_pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)))
+#ifdef CONFIG_PPC_HAS_HASH_64K
+#define pte_pagesize_index(mm, addr, pte) get_slice_psize(mm, addr)
+#else
+#define pte_pagesize_index(mm, addr, pte) MMU_PAGE_4K
+#endif
-#define pte_none(pte) ((pte_val(pte) & ~_PAGE_HPTEFLAGS) == 0)
-#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
+#endif /* __real_pte */
+
/* pte_clear moved to later in this file */
-#define pte_pfn(x) ((unsigned long)((pte_val(x)>>PTE_RPN_SHIFT)))
-#define pte_page(x) pfn_to_page(pte_pfn(x))
-
#define PMD_BAD_BITS (PTE_TABLE_SIZE-1)
#define PUD_BAD_BITS (PMD_TABLE_SIZE-1)
@@ -235,36 +171,6 @@
/* This now only contains the vmalloc pages */
#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW;}
-static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY;}
-static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;}
-static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE;}
-static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; }
-
-static inline pte_t pte_wrprotect(pte_t pte) {
- pte_val(pte) &= ~(_PAGE_RW); return pte; }
-static inline pte_t pte_mkclean(pte_t pte) {
- pte_val(pte) &= ~(_PAGE_DIRTY); return pte; }
-static inline pte_t pte_mkold(pte_t pte) {
- pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkwrite(pte_t pte) {
- pte_val(pte) |= _PAGE_RW; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) {
- pte_val(pte) |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) {
- pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkhuge(pte_t pte) {
- return pte; }
-static inline pte_t pte_mkspecial(pte_t pte) {
- pte_val(pte) |= _PAGE_SPECIAL; return pte; }
-static inline pgprot_t pte_pgprot(pte_t pte)
-{
- return __pgprot(pte_val(pte) & PAGE_PROT_BITS);
-}
/* Atomic PTE updates */
static inline unsigned long pte_update(struct mm_struct *mm,
@@ -272,6 +178,7 @@
pte_t *ptep, unsigned long clr,
int huge)
{
+#ifdef PTE_ATOMIC_UPDATES
unsigned long old, tmp;
__asm__ __volatile__(
@@ -284,6 +191,13 @@
: "=&r" (old), "=&r" (tmp), "=m" (*ptep)
: "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY)
: "cc" );
+#else
+ unsigned long old = pte_val(*ptep);
+ *ptep = __pte(old & ~clr);
+#endif
+ /* huge pages use the old page table lock */
+ if (!huge)
+ assert_pte_locked(mm, addr);
if (old & _PAGE_HASHPTE)
hpte_need_flush(mm, addr, ptep, old, huge);
@@ -359,26 +273,17 @@
pte_update(mm, addr, ptep, ~0UL, 0);
}
-/*
- * set_pte stores a linux PTE into the linux page table.
- */
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pte)
-{
- if (pte_present(*ptep))
- pte_clear(mm, addr, ptep);
- pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
- *ptep = pte;
-}
/* Set the dirty and/or accessed bits atomically in a linux PTE, this
* function doesn't need to flush the hash entry
*/
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
{
unsigned long bits = pte_val(entry) &
- (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
+ (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW |
+ _PAGE_EXEC | _PAGE_HWEXEC);
+
+#ifdef PTE_ATOMIC_UPDATES
unsigned long old, tmp;
__asm__ __volatile__(
@@ -391,16 +296,11 @@
:"=&r" (old), "=&r" (tmp), "=m" (*ptep)
:"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY)
:"cc");
+#else
+ unsigned long old = pte_val(*ptep);
+ *ptep = __pte(old | bits);
+#endif
}
-#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
-({ \
- int __changed = !pte_same(*(__ptep), __entry); \
- if (__changed) { \
- __ptep_set_access_flags(__ptep, __entry, __dirty); \
- flush_tlb_page_nohash(__vma, __address); \
- } \
- __changed; \
-})
#define __HAVE_ARCH_PTE_SAME
#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0)
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 07f55e6..eb17da7 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -6,7 +6,17 @@
#include <asm/processor.h> /* For TASK_SIZE */
#include <asm/mmu.h>
#include <asm/page.h>
+
struct mm_struct;
+
+#ifdef CONFIG_DEBUG_VM
+extern void assert_pte_locked(struct mm_struct *mm, unsigned long addr);
+#else /* CONFIG_DEBUG_VM */
+static inline void assert_pte_locked(struct mm_struct *mm, unsigned long addr)
+{
+}
+#endif /* !CONFIG_DEBUG_VM */
+
#endif /* !__ASSEMBLY__ */
#if defined(CONFIG_PPC64)
@@ -17,6 +27,130 @@
#ifndef __ASSEMBLY__
+/* Generic accessors to PTE bits */
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
+static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; }
+static inline int pte_present(pte_t pte) { return pte_val(pte) & _PAGE_PRESENT; }
+static inline int pte_none(pte_t pte) { return (pte_val(pte) & ~_PTE_NONE_MASK) == 0; }
+static inline pgprot_t pte_pgprot(pte_t pte) { return __pgprot(pte_val(pte) & PAGE_PROT_BITS); }
+
+/* Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * Even if PTEs can be unsigned long long, a PFN is always an unsigned
+ * long for now.
+ */
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot) {
+ return __pte(((pte_basic_t)(pfn) << PTE_RPN_SHIFT) |
+ pgprot_val(pgprot)); }
+static inline unsigned long pte_pfn(pte_t pte) {
+ return pte_val(pte) >> PTE_RPN_SHIFT; }
+
+/* Keep these as a macros to avoid include dependency mess */
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+
+/* Generic modifiers for PTE bits */
+static inline pte_t pte_wrprotect(pte_t pte) {
+ pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkclean(pte_t pte) {
+ pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkold(pte_t pte) {
+ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) {
+ pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) {
+ pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) {
+ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkspecial(pte_t pte) {
+ pte_val(pte) |= _PAGE_SPECIAL; return pte; }
+static inline pte_t pte_mkhuge(pte_t pte) {
+ return pte; }
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+ return pte;
+}
+
+
+/* Insert a PTE, top-level function is out of line. It uses an inline
+ * low level function in the respective pgtable-* files
+ */
+extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
+ pte_t pte);
+
+/* This low level function performs the actual PTE insertion
+ * Setting the PTE depends on the MMU type and other factors. It's
+ * an horrible mess that I'm not going to try to clean up now but
+ * I'm keeping it in one place rather than spread around
+ */
+static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pte, int percpu)
+{
+#if defined(CONFIG_PPC_STD_MMU_32) && defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT)
+ /* First case is 32-bit Hash MMU in SMP mode with 32-bit PTEs. We use the
+ * helper pte_update() which does an atomic update. We need to do that
+ * because a concurrent invalidation can clear _PAGE_HASHPTE. If it's a
+ * per-CPU PTE such as a kmap_atomic, we do a simple update preserving
+ * the hash bits instead (ie, same as the non-SMP case)
+ */
+ if (percpu)
+ *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+ | (pte_val(pte) & ~_PAGE_HASHPTE));
+ else
+ pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte));
+
+#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP)
+ /* Second case is 32-bit with 64-bit PTE in SMP mode. In this case, we
+ * can just store as long as we do the two halves in the right order
+ * with a barrier in between. This is possible because we take care,
+ * in the hash code, to pre-invalidate if the PTE was already hashed,
+ * which synchronizes us with any concurrent invalidation.
+ * In the percpu case, we also fallback to the simple update preserving
+ * the hash bits
+ */
+ if (percpu) {
+ *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+ | (pte_val(pte) & ~_PAGE_HASHPTE));
+ return;
+ }
+#if _PAGE_HASHPTE != 0
+ if (pte_val(*ptep) & _PAGE_HASHPTE)
+ flush_hash_entry(mm, ptep, addr);
+#endif
+ __asm__ __volatile__("\
+ stw%U0%X0 %2,%0\n\
+ eieio\n\
+ stw%U0%X0 %L2,%1"
+ : "=m" (*ptep), "=m" (*((unsigned char *)ptep+4))
+ : "r" (pte) : "memory");
+
+#elif defined(CONFIG_PPC_STD_MMU_32)
+ /* Third case is 32-bit hash table in UP mode, we need to preserve
+ * the _PAGE_HASHPTE bit since we may not have invalidated the previous
+ * translation in the hash yet (done in a subsequent flush_tlb_xxx())
+ * and see we need to keep track that this PTE needs invalidating
+ */
+ *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+ | (pte_val(pte) & ~_PAGE_HASHPTE));
+
+#else
+ /* Anything else just stores the PTE normally. That covers all 64-bit
+ * cases, and 32-bit non-hash with 64-bit PTEs in UP mode
+ */
+ *ptep = pte;
+#endif
+}
+
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
+ pte_t *ptep, pte_t entry, int dirty);
+
/*
* Macro to mark a page protection value as "uncacheable".
*/
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
new file mode 100644
index 0000000..f4a4db8
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2009 Freescale Semicondutor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * provides masks and opcode images for use by code generation, emulation
+ * and for instructions that older assemblers might not know about
+ */
+#ifndef _ASM_POWERPC_PPC_OPCODE_H
+#define _ASM_POWERPC_PPC_OPCODE_H
+
+#include <linux/stringify.h>
+#include <asm/asm-compat.h>
+
+/* sorted alphabetically */
+#define PPC_INST_DCBA 0x7c0005ec
+#define PPC_INST_DCBA_MASK 0xfc0007fe
+#define PPC_INST_DCBAL 0x7c2005ec
+#define PPC_INST_DCBZL 0x7c2007ec
+#define PPC_INST_ISEL 0x7c00001e
+#define PPC_INST_ISEL_MASK 0xfc00003e
+#define PPC_INST_LSWI 0x7c0004aa
+#define PPC_INST_LSWX 0x7c00042a
+#define PPC_INST_LWSYNC 0x7c2004ac
+#define PPC_INST_MCRXR 0x7c000400
+#define PPC_INST_MCRXR_MASK 0xfc0007fe
+#define PPC_INST_MFSPR_PVR 0x7c1f42a6
+#define PPC_INST_MFSPR_PVR_MASK 0xfc1fffff
+#define PPC_INST_MSGSND 0x7c00019c
+#define PPC_INST_NOP 0x60000000
+#define PPC_INST_POPCNTB 0x7c0000f4
+#define PPC_INST_POPCNTB_MASK 0xfc0007fe
+#define PPC_INST_RFCI 0x4c000066
+#define PPC_INST_RFDI 0x4c00004e
+#define PPC_INST_RFMCI 0x4c00004c
+
+#define PPC_INST_STRING 0x7c00042a
+#define PPC_INST_STRING_MASK 0xfc0007fe
+#define PPC_INST_STRING_GEN_MASK 0xfc00067e
+
+#define PPC_INST_STSWI 0x7c0005aa
+#define PPC_INST_STSWX 0x7c00052a
+#define PPC_INST_TLBILX 0x7c000626
+#define PPC_INST_WAIT 0x7c00007c
+
+/* macros to insert fields into opcodes */
+#define __PPC_RA(a) ((a & 0x1f) << 16)
+#define __PPC_RB(b) ((b & 0x1f) << 11)
+#define __PPC_T_TLB(t) ((t & 0x3) << 21)
+#define __PPC_WC(w) ((w & 0x3) << 21)
+
+/* Deal with instructions that older assemblers aren't aware of */
+#define PPC_DCBAL(a, b) stringify_in_c(.long PPC_INST_DCBAL | \
+ __PPC_RA(a) | __PPC_RB(b))
+#define PPC_DCBZL(a, b) stringify_in_c(.long PPC_INST_DCBZL | \
+ __PPC_RA(a) | __PPC_RB(b))
+#define PPC_MSGSND(b) stringify_in_c(.long PPC_INST_MSGSND | \
+ __PPC_RB(b))
+#define PPC_RFCI stringify_in_c(.long PPC_INST_RFCI)
+#define PPC_RFDI stringify_in_c(.long PPC_INST_RFDI)
+#define PPC_RFMCI stringify_in_c(.long PPC_INST_RFMCI)
+#define PPC_TLBILX(t, a, b) stringify_in_c(.long PPC_INST_TLBILX | \
+ __PPC_T_TLB(t) | __PPC_RA(a) | __PPC_RB(b))
+#define PPC_TLBILX_ALL(a, b) PPC_TLBILX(0, a, b)
+#define PPC_TLBILX_PID(a, b) PPC_TLBILX(1, a, b)
+#define PPC_TLBILX_VA(a, b) PPC_TLBILX(3, a, b)
+#define PPC_WAIT(w) stringify_in_c(.long PPC_INST_WAIT | \
+ __PPC_WC(w))
+
+#endif /* _ASM_POWERPC_PPC_OPCODE_H */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 1a0d628..f59a666 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -7,6 +7,7 @@
#include <linux/stringify.h>
#include <asm/asm-compat.h>
#include <asm/processor.h>
+#include <asm/ppc-opcode.h>
#ifndef __ASSEMBLY__
#error __FILE__ should only be used in assembler files
@@ -167,11 +168,6 @@
#define HMT_MEDIUM_HIGH or 5,5,5 # medium high priority
#define HMT_HIGH or 3,3,3
-/* handle instructions that older assemblers may not know */
-#define RFCI .long 0x4c000066 /* rfci instruction */
-#define RFDI .long 0x4c00004e /* rfdi instruction */
-#define RFMCI .long 0x4c00004c /* rfmci instruction */
-
#ifdef __KERNEL__
#ifdef CONFIG_PPC64
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index d346649..9eed29e 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -313,6 +313,25 @@
#define HAVE_ARCH_PICK_MMAP_LAYOUT
#endif
+#ifdef CONFIG_PPC64
+static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32)
+{
+ unsigned long sp;
+
+ if (is_32)
+ sp = regs->gpr[1] & 0x0ffffffffUL;
+ else
+ sp = regs->gpr[1];
+
+ return sp;
+}
+#else
+static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32)
+{
+ return regs->gpr[1];
+}
+#endif
+
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_PROCESSOR_H */
diff --git a/arch/powerpc/include/asm/ps3av.h b/arch/powerpc/include/asm/ps3av.h
index cd24ac1..0427b0b 100644
--- a/arch/powerpc/include/asm/ps3av.h
+++ b/arch/powerpc/include/asm/ps3av.h
@@ -730,7 +730,7 @@
extern int ps3av_cmd_video_get_monitor_info(struct ps3av_pkt_av_get_monitor_info *,
u32);
-extern int ps3av_set_video_mode(u32);
+extern int ps3av_set_video_mode(int);
extern int ps3av_set_audio_mode(u32, u32, u32, u32, u32);
extern int ps3av_get_auto_mode(void);
extern int ps3av_get_mode(void);
diff --git a/arch/powerpc/include/asm/ps3fb.h b/arch/powerpc/include/asm/ps3fb.h
index e7233a8..90dbefb 100644
--- a/arch/powerpc/include/asm/ps3fb.h
+++ b/arch/powerpc/include/asm/ps3fb.h
@@ -21,6 +21,7 @@
#include <linux/types.h>
#include <linux/ioctl.h>
+#include <linux/types.h>
/* ioctl */
#define PS3FB_IOCTL_SETMODE _IOW('r', 1, int) /* set video mode */
diff --git a/arch/powerpc/include/asm/pte-40x.h b/arch/powerpc/include/asm/pte-40x.h
new file mode 100644
index 0000000..07630fa
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-40x.h
@@ -0,0 +1,64 @@
+#ifndef _ASM_POWERPC_PTE_40x_H
+#define _ASM_POWERPC_PTE_40x_H
+#ifdef __KERNEL__
+
+/*
+ * At present, all PowerPC 400-class processors share a similar TLB
+ * architecture. The instruction and data sides share a unified,
+ * 64-entry, fully-associative TLB which is maintained totally under
+ * software control. In addition, the instruction side has a
+ * hardware-managed, 4-entry, fully-associative TLB which serves as a
+ * first level to the shared TLB. These two TLBs are known as the UTLB
+ * and ITLB, respectively (see "mmu.h" for definitions).
+ *
+ * There are several potential gotchas here. The 40x hardware TLBLO
+ * field looks like this:
+ *
+ * 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * RPN..................... 0 0 EX WR ZSEL....... W I M G
+ *
+ * Where possible we make the Linux PTE bits match up with this
+ *
+ * - bits 20 and 21 must be cleared, because we use 4k pages (40x can
+ * support down to 1k pages), this is done in the TLBMiss exception
+ * handler.
+ * - We use only zones 0 (for kernel pages) and 1 (for user pages)
+ * of the 16 available. Bit 24-26 of the TLB are cleared in the TLB
+ * miss handler. Bit 27 is PAGE_USER, thus selecting the correct
+ * zone.
+ * - PRESENT *must* be in the bottom two bits because swap cache
+ * entries use the top 30 bits. Because 40x doesn't support SMP
+ * anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30
+ * is cleared in the TLB miss handler before the TLB entry is loaded.
+ * - All other bits of the PTE are loaded into TLBLO without
+ * modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
+ * software PTE bits. We actually use use bits 21, 24, 25, and
+ * 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
+ * PRESENT.
+ */
+
+#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
+#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */
+#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
+#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
+#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
+#define _PAGE_USER 0x010 /* matches one of the zone permission bits */
+#define _PAGE_RW 0x040 /* software: Writes permitted */
+#define _PAGE_DIRTY 0x080 /* software: dirty page */
+#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
+#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */
+#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
+
+#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */
+#define _PMD_BAD 0x802
+#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */
+#define _PMD_SIZE_4M 0x0c0
+#define _PMD_SIZE_16M 0x0e0
+
+#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4))
+
+/* Until my rework is finished, 40x still needs atomic PTE updates */
+#define PTE_ATOMIC_UPDATES 1
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PTE_40x_H */
diff --git a/arch/powerpc/include/asm/pte-44x.h b/arch/powerpc/include/asm/pte-44x.h
new file mode 100644
index 0000000..37e98bc
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-44x.h
@@ -0,0 +1,102 @@
+#ifndef _ASM_POWERPC_PTE_44x_H
+#define _ASM_POWERPC_PTE_44x_H
+#ifdef __KERNEL__
+
+/*
+ * Definitions for PPC440
+ *
+ * Because of the 3 word TLB entries to support 36-bit addressing,
+ * the attribute are difficult to map in such a fashion that they
+ * are easily loaded during exception processing. I decided to
+ * organize the entry so the ERPN is the only portion in the
+ * upper word of the PTE and the attribute bits below are packed
+ * in as sensibly as they can be in the area below a 4KB page size
+ * oriented RPN. This at least makes it easy to load the RPN and
+ * ERPN fields in the TLB. -Matt
+ *
+ * This isn't entirely true anymore, at least some bits are now
+ * easier to move into the TLB from the PTE. -BenH.
+ *
+ * Note that these bits preclude future use of a page size
+ * less than 4KB.
+ *
+ *
+ * PPC 440 core has following TLB attribute fields;
+ *
+ * TLB1:
+ * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * RPN................................. - - - - - - ERPN.......
+ *
+ * TLB2:
+ * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR
+ *
+ * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional
+ * TLB2 storage attibute fields. Those are:
+ *
+ * TLB2:
+ * 0...10 11 12 13 14 15 16...31
+ * no change WL1 IL1I IL1D IL2I IL2D no change
+ *
+ * There are some constrains and options, to decide mapping software bits
+ * into TLB entry.
+ *
+ * - PRESENT *must* be in the bottom three bits because swap cache
+ * entries use the top 29 bits for TLB2.
+ *
+ * - FILE *must* be in the bottom three bits because swap cache
+ * entries use the top 29 bits for TLB2.
+ *
+ * - CACHE COHERENT bit (M) has no effect on original PPC440 cores,
+ * because it doesn't support SMP. However, some later 460 variants
+ * have -some- form of SMP support and so I keep the bit there for
+ * future use
+ *
+ * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
+ * for memory protection related functions (see PTE structure in
+ * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the
+ * above bits. Note that the bit values are CPU specific, not architecture
+ * specific.
+ *
+ * The kernel PTE entry holds an arch-dependent swp_entry structure under
+ * certain situations. In other words, in such situations some portion of
+ * the PTE bits are used as a swp_entry. In the PPC implementation, the
+ * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still
+ * hold protection values. That means the three protection bits are
+ * reserved for both PTE and SWAP entry at the most significant three
+ * LSBs.
+ *
+ * There are three protection bits available for SWAP entry:
+ * _PAGE_PRESENT
+ * _PAGE_FILE
+ * _PAGE_HASHPTE (if HW has)
+ *
+ * So those three bits have to be inside of 0-2nd LSB of PTE.
+ *
+ */
+
+#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */
+#define _PAGE_RW 0x00000002 /* S: Write permission */
+#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */
+#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */
+#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */
+#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */
+#define _PAGE_SPECIAL 0x00000020 /* S: Special page */
+#define _PAGE_USER 0x00000040 /* S: User page */
+#define _PAGE_ENDIAN 0x00000080 /* H: E bit */
+#define _PAGE_GUARDED 0x00000100 /* H: G bit */
+#define _PAGE_COHERENT 0x00000200 /* H: M bit */
+#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */
+#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */
+
+/* TODO: Add large page lowmem mapping support */
+#define _PMD_PRESENT 0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD (~PAGE_MASK)
+
+/* ERPN in a PTE never gets cleared, ignore it */
+#define _PTE_NONE_MASK 0xffffffff00000000ULL
+
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PTE_44x_H */
diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/pte-8xx.h
new file mode 100644
index 0000000..8c6e312
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-8xx.h
@@ -0,0 +1,67 @@
+#ifndef _ASM_POWERPC_PTE_8xx_H
+#define _ASM_POWERPC_PTE_8xx_H
+#ifdef __KERNEL__
+
+/*
+ * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
+ * We also use the two level tables, but we can put the real bits in them
+ * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0,
+ * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has
+ * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
+ * based upon user/super access. The TLB does not have accessed nor write
+ * protect. We assume that if the TLB get loaded with an entry it is
+ * accessed, and overload the changed bit for write protect. We use
+ * two bits in the software pte that are supposed to be set to zero in
+ * the TLB entry (24 and 25) for these indicators. Although the level 1
+ * descriptor contains the guarded and writethrough/copyback bits, we can
+ * set these at the page level since they get copied from the Mx_TWC
+ * register when the TLB entry is loaded. We will use bit 27 for guard, since
+ * that is where it exists in the MD_TWC, and bit 26 for writethrough.
+ * These will get masked from the level 2 descriptor at TLB load time, and
+ * copied to the MD_TWC before it gets loaded.
+ * Large page sizes added. We currently support two sizes, 4K and 8M.
+ * This also allows a TLB hander optimization because we can directly
+ * load the PMD into MD_TWC. The 8M pages are only used for kernel
+ * mapping of well known areas. The PMD (PGD) entries contain control
+ * flags in addition to the address, so care must be taken that the
+ * software no longer assumes these are only pointers.
+ */
+
+/* Definitions for 8xx embedded chips. */
+#define _PAGE_PRESENT 0x0001 /* Page is valid */
+#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */
+#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */
+#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */
+
+/* These five software bits must be masked out when the entry is loaded
+ * into the TLB.
+ */
+#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */
+#define _PAGE_GUARDED 0x0010 /* software: guarded access */
+#define _PAGE_DIRTY 0x0020 /* software: page changed */
+#define _PAGE_RW 0x0040 /* software: user write access allowed */
+#define _PAGE_ACCESSED 0x0080 /* software: page referenced */
+
+/* Setting any bits in the nibble with the follow two controls will
+ * require a TLB exception handler change. It is assumed unused bits
+ * are always zero.
+ */
+#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */
+#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */
+
+#define _PMD_PRESENT 0x0001
+#define _PMD_BAD 0x0ff0
+#define _PMD_PAGE_MASK 0x000c
+#define _PMD_PAGE_8M 0x000c
+
+#define _PTE_NONE_MASK _PAGE_ACCESSED
+
+/* Until my rework is finished, 8xx still needs atomic PTE updates */
+#define PTE_ATOMIC_UPDATES 1
+
+/* We need to add _PAGE_SHARED to kernel pages */
+#define _PAGE_KERNEL_RO (_PAGE_SHARED)
+#define _PAGE_KERNEL_RW (_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE)
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PTE_8xx_H */
diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h
new file mode 100644
index 0000000..d9740e8
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-common.h
@@ -0,0 +1,180 @@
+/* Included from asm/pgtable-*.h only ! */
+
+/*
+ * Some bits are only used on some cpu families... Make sure that all
+ * the undefined gets a sensible default
+ */
+#ifndef _PAGE_HASHPTE
+#define _PAGE_HASHPTE 0
+#endif
+#ifndef _PAGE_SHARED
+#define _PAGE_SHARED 0
+#endif
+#ifndef _PAGE_HWWRITE
+#define _PAGE_HWWRITE 0
+#endif
+#ifndef _PAGE_HWEXEC
+#define _PAGE_HWEXEC 0
+#endif
+#ifndef _PAGE_EXEC
+#define _PAGE_EXEC 0
+#endif
+#ifndef _PAGE_ENDIAN
+#define _PAGE_ENDIAN 0
+#endif
+#ifndef _PAGE_COHERENT
+#define _PAGE_COHERENT 0
+#endif
+#ifndef _PAGE_WRITETHRU
+#define _PAGE_WRITETHRU 0
+#endif
+#ifndef _PAGE_SPECIAL
+#define _PAGE_SPECIAL 0
+#endif
+#ifndef _PAGE_4K_PFN
+#define _PAGE_4K_PFN 0
+#endif
+#ifndef _PAGE_PSIZE
+#define _PAGE_PSIZE 0
+#endif
+#ifndef _PMD_PRESENT_MASK
+#define _PMD_PRESENT_MASK _PMD_PRESENT
+#endif
+#ifndef _PMD_SIZE
+#define _PMD_SIZE 0
+#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE()
+#endif
+#ifndef _PAGE_KERNEL_RO
+#define _PAGE_KERNEL_RO 0
+#endif
+#ifndef _PAGE_KERNEL_RW
+#define _PAGE_KERNEL_RW (_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE)
+#endif
+#ifndef _PAGE_HPTEFLAGS
+#define _PAGE_HPTEFLAGS _PAGE_HASHPTE
+#endif
+#ifndef _PTE_NONE_MASK
+#define _PTE_NONE_MASK _PAGE_HPTEFLAGS
+#endif
+
+/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a
+ * kernel without large page PMD support
+ */
+#ifndef __ASSEMBLY__
+extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
+#endif /* __ASSEMBLY__ */
+
+/* Location of the PFN in the PTE. Most 32-bit platforms use the same
+ * as _PAGE_SHIFT here (ie, naturally aligned).
+ * Platform who don't just pre-define the value so we don't override it here
+ */
+#ifndef PTE_RPN_SHIFT
+#define PTE_RPN_SHIFT (PAGE_SHIFT)
+#endif
+
+/* The mask convered by the RPN must be a ULL on 32-bit platforms with
+ * 64-bit PTEs
+ */
+#if defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
+#define PTE_RPN_MAX (1ULL << (64 - PTE_RPN_SHIFT))
+#define PTE_RPN_MASK (~((1ULL<<PTE_RPN_SHIFT)-1))
+#else
+#define PTE_RPN_MAX (1UL << (32 - PTE_RPN_SHIFT))
+#define PTE_RPN_MASK (~((1UL<<PTE_RPN_SHIFT)-1))
+#endif
+
+/* _PAGE_CHG_MASK masks of bits that are to be preserved accross
+ * pgprot changes
+ */
+#define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
+ _PAGE_ACCESSED | _PAGE_SPECIAL)
+
+/* Mask of bits returned by pte_pgprot() */
+#define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
+ _PAGE_WRITETHRU | _PAGE_ENDIAN | _PAGE_4K_PFN | \
+ _PAGE_USER | _PAGE_ACCESSED | \
+ _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
+ _PAGE_EXEC | _PAGE_HWEXEC)
+
+/*
+ * We define 2 sets of base prot bits, one for basic pages (ie,
+ * cacheable kernel and user pages) and one for non cacheable
+ * pages. We always set _PAGE_COHERENT when SMP is enabled or
+ * the processor might need it for DMA coherency.
+ */
+#define _PAGE_BASE_NC (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_PSIZE)
+#if defined(CONFIG_SMP) || defined(CONFIG_PPC_STD_MMU)
+#define _PAGE_BASE (_PAGE_BASE_NC | _PAGE_COHERENT)
+#else
+#define _PAGE_BASE (_PAGE_BASE_NC)
+#endif
+
+/* Permission masks used to generate the __P and __S table,
+ *
+ * Note:__pgprot is defined in arch/powerpc/include/asm/page.h
+ *
+ * Write permissions imply read permissions for now (we could make write-only
+ * pages on BookE but we don't bother for now). Execute permission control is
+ * possible on platforms that define _PAGE_EXEC
+ *
+ * Note due to the way vm flags are laid out, the bits are XWR
+ */
+#define PAGE_NONE __pgprot(_PAGE_BASE)
+#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
+#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
+#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+
+#define __P000 PAGE_NONE
+#define __P001 PAGE_READONLY
+#define __P010 PAGE_COPY
+#define __P011 PAGE_COPY
+#define __P100 PAGE_READONLY_X
+#define __P101 PAGE_READONLY_X
+#define __P110 PAGE_COPY_X
+#define __P111 PAGE_COPY_X
+
+#define __S000 PAGE_NONE
+#define __S001 PAGE_READONLY
+#define __S010 PAGE_SHARED
+#define __S011 PAGE_SHARED
+#define __S100 PAGE_READONLY_X
+#define __S101 PAGE_READONLY_X
+#define __S110 PAGE_SHARED_X
+#define __S111 PAGE_SHARED_X
+
+/* Permission masks used for kernel mappings */
+#define PAGE_KERNEL __pgprot(_PAGE_BASE | _PAGE_KERNEL_RW)
+#define PAGE_KERNEL_NC __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \
+ _PAGE_NO_CACHE)
+#define PAGE_KERNEL_NCG __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \
+ _PAGE_NO_CACHE | _PAGE_GUARDED)
+#define PAGE_KERNEL_X __pgprot(_PAGE_BASE | _PAGE_KERNEL_RW | _PAGE_EXEC)
+#define PAGE_KERNEL_RO __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO)
+#define PAGE_KERNEL_ROX __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO | _PAGE_EXEC)
+
+/* Protection used for kernel text. We want the debuggers to be able to
+ * set breakpoints anywhere, so don't write protect the kernel text
+ * on platforms where such control is possible.
+ */
+#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
+ defined(CONFIG_KPROBES)
+#define PAGE_KERNEL_TEXT PAGE_KERNEL_X
+#else
+#define PAGE_KERNEL_TEXT PAGE_KERNEL_ROX
+#endif
+
+/* Make modules code happy. We don't set RO yet */
+#define PAGE_KERNEL_EXEC PAGE_KERNEL_X
+
+/* Advertise special mapping type for AGP */
+#define PAGE_AGP (PAGE_KERNEL_NC)
+#define HAVE_PAGE_AGP
+
+/* Advertise support for _PAGE_SPECIAL */
+#ifdef _PAGE_SPECIAL
+#define __HAVE_ARCH_PTE_SPECIAL
+#endif
+
diff --git a/arch/powerpc/include/asm/pte-fsl-booke.h b/arch/powerpc/include/asm/pte-fsl-booke.h
new file mode 100644
index 0000000..10820f5
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-fsl-booke.h
@@ -0,0 +1,48 @@
+#ifndef _ASM_POWERPC_PTE_FSL_BOOKE_H
+#define _ASM_POWERPC_PTE_FSL_BOOKE_H
+#ifdef __KERNEL__
+
+/* PTE bit definitions for Freescale BookE SW loaded TLB MMU based
+ * processors
+ *
+ MMU Assist Register 3:
+
+ 32 33 34 35 36 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63
+ RPN...................... 0 0 U0 U1 U2 U3 UX SX UW SW UR SR
+
+ - PRESENT *must* be in the bottom three bits because swap cache
+ entries use the top 29 bits.
+
+ - FILE *must* be in the bottom three bits because swap cache
+ entries use the top 29 bits.
+*/
+
+/* Definitions for FSL Book-E Cores */
+#define _PAGE_PRESENT 0x00001 /* S: PTE contains a translation */
+#define _PAGE_USER 0x00002 /* S: User page (maps to UR) */
+#define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */
+#define _PAGE_RW 0x00004 /* S: Write permission (SW) */
+#define _PAGE_DIRTY 0x00008 /* S: Page dirty */
+#define _PAGE_HWEXEC 0x00010 /* H: SX permission */
+#define _PAGE_ACCESSED 0x00020 /* S: Page referenced */
+
+#define _PAGE_ENDIAN 0x00040 /* H: E bit */
+#define _PAGE_GUARDED 0x00080 /* H: G bit */
+#define _PAGE_COHERENT 0x00100 /* H: M bit */
+#define _PAGE_NO_CACHE 0x00200 /* H: I bit */
+#define _PAGE_WRITETHRU 0x00400 /* H: W bit */
+#define _PAGE_SPECIAL 0x00800 /* S: Special page */
+
+#ifdef CONFIG_PTE_64BIT
+/* ERPN in a PTE never gets cleared, ignore it */
+#define _PTE_NONE_MASK 0xffffffffffff0000ULL
+/* We extend the size of the PTE flags area when using 64-bit PTEs */
+#define PTE_RPN_SHIFT (PAGE_SHIFT + 8)
+#endif
+
+#define _PMD_PRESENT 0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD (~PAGE_MASK)
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PTE_FSL_BOOKE_H */
diff --git a/arch/powerpc/include/asm/pte-hash32.h b/arch/powerpc/include/asm/pte-hash32.h
new file mode 100644
index 0000000..16e571c
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-hash32.h
@@ -0,0 +1,48 @@
+#ifndef _ASM_POWERPC_PTE_HASH32_H
+#define _ASM_POWERPC_PTE_HASH32_H
+#ifdef __KERNEL__
+
+/*
+ * The "classic" 32-bit implementation of the PowerPC MMU uses a hash
+ * table containing PTEs, together with a set of 16 segment registers,
+ * to define the virtual to physical address mapping.
+ *
+ * We use the hash table as an extended TLB, i.e. a cache of currently
+ * active mappings. We maintain a two-level page table tree, much
+ * like that used by the i386, for the sake of the Linux memory
+ * management code. Low-level assembler code in hash_low_32.S
+ * (procedure hash_page) is responsible for extracting ptes from the
+ * tree and putting them into the hash table when necessary, and
+ * updating the accessed and modified bits in the page table tree.
+ */
+
+#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */
+#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */
+#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */
+#define _PAGE_USER 0x004 /* usermode access allowed */
+#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */
+#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */
+#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */
+#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */
+#define _PAGE_DIRTY 0x080 /* C: page changed */
+#define _PAGE_ACCESSED 0x100 /* R: page referenced */
+#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */
+#define _PAGE_RW 0x400 /* software: user write access allowed */
+#define _PAGE_SPECIAL 0x800 /* software: Special page */
+
+#ifdef CONFIG_PTE_64BIT
+/* We never clear the high word of the pte */
+#define _PTE_NONE_MASK (0xffffffff00000000ULL | _PAGE_HASHPTE)
+#else
+#define _PTE_NONE_MASK _PAGE_HASHPTE
+#endif
+
+#define _PMD_PRESENT 0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD (~PAGE_MASK)
+
+/* Hash table based platforms need atomic updates of the linux PTE */
+#define PTE_ATOMIC_UPDATES 1
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PTE_HASH32_H */
diff --git a/arch/powerpc/include/asm/pte-hash64-4k.h b/arch/powerpc/include/asm/pte-hash64-4k.h
new file mode 100644
index 0000000..c134e809
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-hash64-4k.h
@@ -0,0 +1,17 @@
+/* To be include by pgtable-hash64.h only */
+
+/* PTE bits */
+#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */
+#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */
+#define _PAGE_GROUP_IX 0x7000 /* software: HPTE index within group */
+#define _PAGE_F_SECOND _PAGE_SECONDARY
+#define _PAGE_F_GIX _PAGE_GROUP_IX
+#define _PAGE_SPECIAL 0x10000 /* software: special page */
+
+/* PTE flags to conserve for HPTE identification */
+#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
+ _PAGE_SECONDARY | _PAGE_GROUP_IX)
+
+/* shift to put page number into pte */
+#define PTE_RPN_SHIFT (17)
+
diff --git a/arch/powerpc/include/asm/pgtable-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
similarity index 73%
rename from arch/powerpc/include/asm/pgtable-64k.h
rename to arch/powerpc/include/asm/pte-hash64-64k.h
index 7389003..e05d26f 100644
--- a/arch/powerpc/include/asm/pgtable-64k.h
+++ b/arch/powerpc/include/asm/pte-hash64-64k.h
@@ -1,22 +1,80 @@
-#ifndef _ASM_POWERPC_PGTABLE_64K_H
-#define _ASM_POWERPC_PGTABLE_64K_H
+/* To be include by pgtable-hash64.h only */
-#include <asm-generic/pgtable-nopud.h>
+/* Additional PTE bits (don't change without checking asm in hash_low.S) */
+#define _PAGE_SPECIAL 0x00000400 /* software: special page */
+#define _PAGE_HPTE_SUB 0x0ffff000 /* combo only: sub pages HPTE bits */
+#define _PAGE_HPTE_SUB0 0x08000000 /* combo only: first sub page */
+#define _PAGE_COMBO 0x10000000 /* this is a combo 4k page */
+#define _PAGE_4K_PFN 0x20000000 /* PFN is for a single 4k page */
+/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead,
+ * we set that to be the whole sub-bits mask. The C code will only
+ * test this, so a multi-bit mask will work. For combo pages, this
+ * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of
+ * all the sub bits. For real 64k pages, we now have the assembly set
+ * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap
+ * that mask. This is fine as long as the HIDX bits are never set on
+ * a PTE that isn't hashed, which is the case today.
+ *
+ * A little nit is for the huge page C code, which does the hashing
+ * in C, we need to provide which bit to use.
+ */
+#define _PAGE_HASHPTE _PAGE_HPTE_SUB
-#define PTE_INDEX_SIZE 12
-#define PMD_INDEX_SIZE 12
-#define PUD_INDEX_SIZE 0
-#define PGD_INDEX_SIZE 4
+/* Note the full page bits must be in the same location as for normal
+ * 4k pages as the same asssembly will be used to insert 64K pages
+ * wether the kernel has CONFIG_PPC_64K_PAGES or not
+ */
+#define _PAGE_F_SECOND 0x00008000 /* full page: hidx bits */
+#define _PAGE_F_GIX 0x00007000 /* full page: hidx bits */
+
+/* PTE flags to conserve for HPTE identification */
+#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO)
+
+/* Shift to put page number into pte.
+ *
+ * That gives us a max RPN of 34 bits, which means a max of 50 bits
+ * of addressable physical space, or 46 bits for the special 4k PFNs.
+ */
+#define PTE_RPN_SHIFT (30)
#ifndef __ASSEMBLY__
-#define PTE_TABLE_SIZE (sizeof(real_pte_t) << PTE_INDEX_SIZE)
-#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE)
-#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE)
-#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE)
-#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE)
-#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE)
+/*
+ * With 64K pages on hash table, we have a special PTE format that
+ * uses a second "half" of the page table to encode sub-page information
+ * in order to deal with 64K made of 4K HW pages. Thus we override the
+ * generic accessors and iterators here
+ */
+#define __real_pte(e,p) ((real_pte_t) { \
+ (e), pte_val(*((p) + PTRS_PER_PTE)) })
+#define __rpte_to_hidx(r,index) ((pte_val((r).pte) & _PAGE_COMBO) ? \
+ (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
+#define __rpte_to_pte(r) ((r).pte)
+#define __rpte_sub_valid(rpte, index) \
+ (pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index)))
+
+/* Trick: we set __end to va + 64k, which happens works for
+ * a 16M page as well as we want only one iteration
+ */
+#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \
+ do { \
+ unsigned long __end = va + PAGE_SIZE; \
+ unsigned __split = (psize == MMU_PAGE_4K || \
+ psize == MMU_PAGE_64K_AP); \
+ shift = mmu_psize_defs[psize].shift; \
+ for (index = 0; va < __end; index++, va += (1L << shift)) { \
+ if (!__split || __rpte_sub_valid(rpte, index)) do { \
+
+#define pte_iterate_hashed_end() } while(0); } } while(0)
+
+#define pte_pagesize_index(mm, addr, pte) \
+ (((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K)
+
+#define remap_4k_pfn(vma, addr, pfn, prot) \
+ remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \
+ __pgprot(pgprot_val((prot)) | _PAGE_4K_PFN))
+
#ifdef CONFIG_PPC_SUBPAGE_PROT
/*
@@ -55,101 +113,3 @@
}
#endif /* CONFIG_PPC_SUBPAGE_PROT */
#endif /* __ASSEMBLY__ */
-
-/* With 4k base page size, hugepage PTEs go at the PMD level */
-#define MIN_HUGEPTE_SHIFT PAGE_SHIFT
-
-/* PMD_SHIFT determines what a second-level page table entry can map */
-#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE)
-#define PMD_SIZE (1UL << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE-1))
-
-/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#define PGDIR_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE)
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE-1))
-
-/* Additional PTE bits (don't change without checking asm in hash_low.S) */
-#define __HAVE_ARCH_PTE_SPECIAL
-#define _PAGE_SPECIAL 0x00000400 /* software: special page */
-#define _PAGE_HPTE_SUB 0x0ffff000 /* combo only: sub pages HPTE bits */
-#define _PAGE_HPTE_SUB0 0x08000000 /* combo only: first sub page */
-#define _PAGE_COMBO 0x10000000 /* this is a combo 4k page */
-#define _PAGE_4K_PFN 0x20000000 /* PFN is for a single 4k page */
-
-/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead,
- * we set that to be the whole sub-bits mask. The C code will only
- * test this, so a multi-bit mask will work. For combo pages, this
- * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of
- * all the sub bits. For real 64k pages, we now have the assembly set
- * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap
- * that mask. This is fine as long as the HIDX bits are never set on
- * a PTE that isn't hashed, which is the case today.
- *
- * A little nit is for the huge page C code, which does the hashing
- * in C, we need to provide which bit to use.
- */
-#define _PAGE_HASHPTE _PAGE_HPTE_SUB
-
-/* Note the full page bits must be in the same location as for normal
- * 4k pages as the same asssembly will be used to insert 64K pages
- * wether the kernel has CONFIG_PPC_64K_PAGES or not
- */
-#define _PAGE_F_SECOND 0x00008000 /* full page: hidx bits */
-#define _PAGE_F_GIX 0x00007000 /* full page: hidx bits */
-
-/* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO)
-
-/* Shift to put page number into pte.
- *
- * That gives us a max RPN of 34 bits, which means a max of 50 bits
- * of addressable physical space, or 46 bits for the special 4k PFNs.
- */
-#define PTE_RPN_SHIFT (30)
-#define PTE_RPN_MAX (1UL << (64 - PTE_RPN_SHIFT))
-#define PTE_RPN_MASK (~((1UL<<PTE_RPN_SHIFT)-1))
-
-/* _PAGE_CHG_MASK masks of bits that are to be preserved accross
- * pgprot changes
- */
-#define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
- _PAGE_ACCESSED | _PAGE_SPECIAL)
-
-/* Bits to mask out from a PMD to get to the PTE page */
-#define PMD_MASKED_BITS 0x1ff
-/* Bits to mask out from a PGD/PUD to get to the PMD page */
-#define PUD_MASKED_BITS 0x1ff
-
-/* Manipulate "rpte" values */
-#define __real_pte(e,p) ((real_pte_t) { \
- (e), pte_val(*((p) + PTRS_PER_PTE)) })
-#define __rpte_to_hidx(r,index) ((pte_val((r).pte) & _PAGE_COMBO) ? \
- (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
-#define __rpte_to_pte(r) ((r).pte)
-#define __rpte_sub_valid(rpte, index) \
- (pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index)))
-
-
-/* Trick: we set __end to va + 64k, which happens works for
- * a 16M page as well as we want only one iteration
- */
-#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \
- do { \
- unsigned long __end = va + PAGE_SIZE; \
- unsigned __split = (psize == MMU_PAGE_4K || \
- psize == MMU_PAGE_64K_AP); \
- shift = mmu_psize_defs[psize].shift; \
- for (index = 0; va < __end; index++, va += (1L << shift)) { \
- if (!__split || __rpte_sub_valid(rpte, index)) do { \
-
-#define pte_iterate_hashed_end() } while(0); } } while(0)
-
-#define pte_pagesize_index(mm, addr, pte) \
- (((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K)
-
-#define remap_4k_pfn(vma, addr, pfn, prot) \
- remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \
- __pgprot(pgprot_val((prot)) | _PAGE_4K_PFN))
-
-#endif /* _ASM_POWERPC_PGTABLE_64K_H */
diff --git a/arch/powerpc/include/asm/pte-hash64.h b/arch/powerpc/include/asm/pte-hash64.h
new file mode 100644
index 0000000..0419eeb
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-hash64.h
@@ -0,0 +1,54 @@
+#ifndef _ASM_POWERPC_PTE_HASH64_H
+#define _ASM_POWERPC_PTE_HASH64_H
+#ifdef __KERNEL__
+
+/*
+ * Common bits between 4K and 64K pages in a linux-style PTE.
+ * These match the bits in the (hardware-defined) PowerPC PTE as closely
+ * as possible. Additional bits may be defined in pgtable-hash64-*.h
+ *
+ * Note: We only support user read/write permissions. Supervisor always
+ * have full read/write to pages above PAGE_OFFSET (pages below that
+ * always use the user access permissions).
+ *
+ * We could create separate kernel read-only if we used the 3 PP bits
+ * combinations that newer processors provide but we currently don't.
+ */
+#define _PAGE_PRESENT 0x0001 /* software: pte contains a translation */
+#define _PAGE_USER 0x0002 /* matches one of the PP bits */
+#define _PAGE_FILE 0x0002 /* (!present only) software: pte holds file offset */
+#define _PAGE_EXEC 0x0004 /* No execute on POWER4 and newer (we invert) */
+#define _PAGE_GUARDED 0x0008
+#define _PAGE_COHERENT 0x0010 /* M: enforce memory coherence (SMP systems) */
+#define _PAGE_NO_CACHE 0x0020 /* I: cache inhibit */
+#define _PAGE_WRITETHRU 0x0040 /* W: cache write-through */
+#define _PAGE_DIRTY 0x0080 /* C: page changed */
+#define _PAGE_ACCESSED 0x0100 /* R: page referenced */
+#define _PAGE_RW 0x0200 /* software: user write access allowed */
+#define _PAGE_BUSY 0x0800 /* software: PTE & hash are busy */
+
+/* No separate kernel read-only */
+#define _PAGE_KERNEL_RW (_PAGE_RW | _PAGE_DIRTY) /* user access blocked by key */
+#define _PAGE_KERNEL_RO _PAGE_KERNEL_RW
+
+/* Strong Access Ordering */
+#define _PAGE_SAO (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT)
+
+/* No page size encoding in the linux PTE */
+#define _PAGE_PSIZE 0
+
+/* PTEIDX nibble */
+#define _PTEIDX_SECONDARY 0x8
+#define _PTEIDX_GROUP_IX 0x7
+
+/* Hash table based platforms need atomic updates of the linux PTE */
+#define PTE_ATOMIC_UPDATES 1
+
+#ifdef CONFIG_PPC_64K_PAGES
+#include <asm/pte-hash64-64k.h>
+#else
+#include <asm/pte-hash64-4k.h>
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PTE_HASH64_H */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index f484a34..c9ff1ec 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -155,6 +155,8 @@
#define CTRL_RUNLATCH 0x1
#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
#define DABR_TRANSLATION (1UL << 2)
+#define DABR_DATA_WRITE (1UL << 1)
+#define DABR_DATA_READ (1UL << 0)
#define SPRN_DABR2 0x13D /* e300 */
#define SPRN_DABRX 0x3F7 /* Data Address Breakpoint Register Extension */
#define DABRX_USER (1UL << 0)
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 6745376..a56f4d61 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -10,6 +10,7 @@
#define __ASM_POWERPC_REG_BOOKE_H__
/* Machine State Register (MSR) Fields */
+#define MSR_GS (1<<28) /* Guest state */
#define MSR_UCLE (1<<26) /* User-mode cache lock enable */
#define MSR_SPE (1<<25) /* Enable SPE */
#define MSR_DWE (1<<10) /* Debug Wait Enable */
@@ -110,6 +111,7 @@
#define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */
#define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */
#define SPRN_MMUCSR0 0x3F4 /* MMU Control and Status Register 0 */
+#define SPRN_MMUCFG 0x3F7 /* MMU Configuration Register */
#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
#define SPRN_BUCSR 0x3F5 /* Branch Unit Control and Status */
#define SPRN_L2CSR0 0x3F9 /* L2 Data Cache Control and Status Register 0 */
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index 2a4be19..f612798 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -531,7 +531,7 @@
#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
#endif
-#define arch_align_stack(x) (x)
+extern unsigned long arch_align_stack(unsigned long sp);
/* Used in very early kernel initialization. */
extern unsigned long reloc_offset(void);
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 9665a26..9aba5a3 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -12,8 +12,10 @@
/* We have 8k stacks on ppc32 and 16k on ppc64 */
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC64)
#define THREAD_SHIFT 14
+#elif defined(CONFIG_PPC_256K_PAGES)
+#define THREAD_SHIFT 15
#else
#define THREAD_SHIFT 13
#endif
@@ -154,6 +156,13 @@
ti->local_flags |= _TLF_RESTORE_SIGMASK;
set_bit(TIF_SIGPENDING, &ti->flags);
}
+
+#ifdef CONFIG_PPC64
+#define is_32bit_task() (test_thread_flag(TIF_32BIT))
+#else
+#define is_32bit_task() (1)
+#endif
+
#endif /* !__ASSEMBLY__ */
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h
index 6418cee..cd21e5e 100644
--- a/arch/powerpc/include/asm/udbg.h
+++ b/arch/powerpc/include/asm/udbg.h
@@ -15,6 +15,7 @@
#include <linux/init.h>
extern void (*udbg_putc)(char c);
+extern void (*udbg_flush)(void);
extern int (*udbg_getc)(void);
extern int (*udbg_getc_poll)(void);
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 8d1a419..71901fb 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -18,12 +18,10 @@
CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
CFLAGS_REMOVE_prom.o = -pg -mno-sched-epilog
-
-ifdef CONFIG_DYNAMIC_FTRACE
-# dynamic ftrace setup.
+# do not trace tracer code
CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
-endif
-
+# timers used by tracing
+CFLAGS_REMOVE_time.o = -pg -mno-sched-epilog
endif
obj-y := cputable.o ptrace.o syscalls.o \
@@ -61,6 +59,7 @@
obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o
obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_44x) += cpu_setup_44x.o
+obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.o
extra-$(CONFIG_PPC_STD_MMU) := head_32.o
extra-$(CONFIG_PPC64) := head_64.o
@@ -76,7 +75,7 @@
obj-$(CONFIG_PPC32) += entry_32.o setup_32.o
obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o
obj-$(CONFIG_KGDB) += kgdb.o
-obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o
+obj-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += prom_init.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
obj-$(CONFIG_BOOTX_TEXT) += btext.o
obj-$(CONFIG_SMP) += smp.o
@@ -94,6 +93,7 @@
obj64-$(CONFIG_AUDIT) += compat_audit.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 73cb6a3..5ffcfaa 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -187,7 +187,7 @@
{ 4, ST+F+S+U }, /* 11 1 1010: stfsux */
{ 8, ST+F+U }, /* 11 1 1011: stfdux */
INVALID, /* 11 1 1100 */
- INVALID, /* 11 1 1101 */
+ { 4, LD+F }, /* 11 1 1101: lfiwzx */
INVALID, /* 11 1 1110 */
INVALID, /* 11 1 1111 */
};
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 42fe4da..1e40bc0 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -284,9 +284,6 @@
#endif /* ! CONFIG_PPC64 */
/* About the CPU features table */
- DEFINE(CPU_SPEC_ENTRY_SIZE, sizeof(struct cpu_spec));
- DEFINE(CPU_SPEC_PVR_MASK, offsetof(struct cpu_spec, pvr_mask));
- DEFINE(CPU_SPEC_PVR_VALUE, offsetof(struct cpu_spec, pvr_value));
DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features));
DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
DEFINE(CPU_SPEC_RESTORE, offsetof(struct cpu_spec, cpu_restore));
diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S
index 10b4ab1..7d606f8 100644
--- a/arch/powerpc/kernel/cpu_setup_44x.S
+++ b/arch/powerpc/kernel/cpu_setup_44x.S
@@ -34,6 +34,7 @@
blr
_GLOBAL(__setup_cpu_460ex)
_GLOBAL(__setup_cpu_460gt)
+_GLOBAL(__setup_cpu_460sx)
mflr r4
bl __init_fpu_44x
bl __fixup_440A_mcheck
diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
index 72d1d73..54f767e 100644
--- a/arch/powerpc/kernel/cpu_setup_6xx.S
+++ b/arch/powerpc/kernel/cpu_setup_6xx.S
@@ -15,9 +15,14 @@
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cache.h>
+#include <asm/mmu.h>
_GLOBAL(__setup_cpu_603)
mflr r4
+BEGIN_MMU_FTR_SECTION
+ li r10,0
+ mtspr SPRN_SPRG4,r10 /* init SW LRU tracking */
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
BEGIN_FTR_SECTION
bl __init_fpu_registers
END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE)
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
new file mode 100644
index 0000000..eb4b9ad
--- /dev/null
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -0,0 +1,31 @@
+/*
+ * This file contains low level CPU setup functions.
+ * Kumar Gala <galak@kernel.crashing.org>
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * Based on cpu_setup_6xx code by
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <asm/processor.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+
+_GLOBAL(__setup_cpu_e200)
+ /* enable dedicated debug exception handling resources (Debug APU) */
+ mfspr r3,SPRN_HID0
+ ori r3,r3,HID0_DAPUEN@l
+ mtspr SPRN_HID0,r3
+ b __setup_e200_ivors
+_GLOBAL(__setup_cpu_e500v1)
+_GLOBAL(__setup_cpu_e500v2)
+ b __setup_e500_ivors
+_GLOBAL(__setup_cpu_e500mc)
+ b __setup_e500mc_ivors
+
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 923f87a..cd1b687 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -35,6 +35,10 @@
* and ppc64
*/
#ifdef CONFIG_PPC32
+extern void __setup_cpu_e200(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_e500v1(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_e500v2(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_e500mc(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440ep(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440epx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec);
@@ -43,6 +47,7 @@
extern void __setup_cpu_440x5(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_460sx(unsigned long offset, struct cpu_spec *spec);
extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec);
@@ -726,6 +731,8 @@
.cpu_setup = __setup_cpu_750,
.machine_check = machine_check_generic,
.platform = "ppc750",
+ .oprofile_cpu_type = "ppc/750",
+ .oprofile_type = PPC_OPROFILE_G4,
},
{ /* 750FX rev 2.0 must disable HID0[DPM] */
.pvr_mask = 0xffffffff,
@@ -741,6 +748,8 @@
.cpu_setup = __setup_cpu_750,
.machine_check = machine_check_generic,
.platform = "ppc750",
+ .oprofile_cpu_type = "ppc/750",
+ .oprofile_type = PPC_OPROFILE_G4,
},
{ /* 750FX (All revs except 2.0) */
.pvr_mask = 0xffff0000,
@@ -756,6 +765,8 @@
.cpu_setup = __setup_cpu_750fx,
.machine_check = machine_check_generic,
.platform = "ppc750",
+ .oprofile_cpu_type = "ppc/750",
+ .oprofile_type = PPC_OPROFILE_G4,
},
{ /* 750GX */
.pvr_mask = 0xffff0000,
@@ -771,6 +782,8 @@
.cpu_setup = __setup_cpu_750fx,
.machine_check = machine_check_generic,
.platform = "ppc750",
+ .oprofile_cpu_type = "ppc/750",
+ .oprofile_type = PPC_OPROFILE_G4,
},
{ /* 740/750 (L2CR bit need fixup for 740) */
.pvr_mask = 0xffff0000,
@@ -1077,7 +1090,8 @@
.cpu_name = "e300c2",
.cpu_features = CPU_FTRS_E300C2,
.cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
- .mmu_features = MMU_FTR_USE_HIGH_BATS,
+ .mmu_features = MMU_FTR_USE_HIGH_BATS |
+ MMU_FTR_NEED_DTLB_SW_LRU,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
@@ -1090,7 +1104,8 @@
.cpu_name = "e300c3",
.cpu_features = CPU_FTRS_E300,
.cpu_user_features = COMMON_USER,
- .mmu_features = MMU_FTR_USE_HIGH_BATS,
+ .mmu_features = MMU_FTR_USE_HIGH_BATS |
+ MMU_FTR_NEED_DTLB_SW_LRU,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
@@ -1105,7 +1120,8 @@
.cpu_name = "e300c4",
.cpu_features = CPU_FTRS_E300,
.cpu_user_features = COMMON_USER,
- .mmu_features = MMU_FTR_USE_HIGH_BATS,
+ .mmu_features = MMU_FTR_USE_HIGH_BATS |
+ MMU_FTR_NEED_DTLB_SW_LRU,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
@@ -1634,6 +1650,19 @@
.machine_check = machine_check_440A,
.platform = "ppc440",
},
+ { /* 460SX */
+ .pvr_mask = 0xffffff00,
+ .pvr_value = 0x13541800,
+ .cpu_name = "460SX",
+ .cpu_features = CPU_FTRS_44X,
+ .cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_44x,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_460sx,
+ .machine_check = machine_check_440A,
+ .platform = "ppc440",
+ },
{ /* default match */
.pvr_mask = 0x00000000,
.pvr_value = 0x00000000,
@@ -1687,6 +1716,7 @@
PPC_FEATURE_UNIFIED_CACHE,
.mmu_features = MMU_FTR_TYPE_FSL_E,
.dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_e200,
.machine_check = machine_check_e200,
.platform = "ppc5554",
}
@@ -1706,6 +1736,7 @@
.num_pmcs = 4,
.oprofile_cpu_type = "ppc/e500",
.oprofile_type = PPC_OPROFILE_FSL_EMB,
+ .cpu_setup = __setup_cpu_e500v1,
.machine_check = machine_check_e500,
.platform = "ppc8540",
},
@@ -1724,6 +1755,7 @@
.num_pmcs = 4,
.oprofile_cpu_type = "ppc/e500",
.oprofile_type = PPC_OPROFILE_FSL_EMB,
+ .cpu_setup = __setup_cpu_e500v2,
.machine_check = machine_check_e500,
.platform = "ppc8548",
},
@@ -1733,12 +1765,14 @@
.cpu_name = "e500mc",
.cpu_features = CPU_FTRS_E500MC,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
- .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS,
+ .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS |
+ MMU_FTR_USE_TLBILX,
.icache_bsize = 64,
.dcache_bsize = 64,
.num_pmcs = 4,
.oprofile_cpu_type = "ppc/e500", /* xxx - galak, e500mc? */
.oprofile_type = PPC_OPROFILE_FSL_EMB,
+ .cpu_setup = __setup_cpu_e500mc,
.machine_check = machine_check_e500,
.platform = "ppce500mc",
},
@@ -1762,74 +1796,84 @@
static struct cpu_spec the_cpu_spec;
+static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s)
+{
+ struct cpu_spec *t = &the_cpu_spec;
+ struct cpu_spec old;
+
+ t = PTRRELOC(t);
+ old = *t;
+
+ /* Copy everything, then do fixups */
+ *t = *s;
+
+ /*
+ * If we are overriding a previous value derived from the real
+ * PVR with a new value obtained using a logical PVR value,
+ * don't modify the performance monitor fields.
+ */
+ if (old.num_pmcs && !s->num_pmcs) {
+ t->num_pmcs = old.num_pmcs;
+ t->pmc_type = old.pmc_type;
+ t->oprofile_type = old.oprofile_type;
+ t->oprofile_mmcra_sihv = old.oprofile_mmcra_sihv;
+ t->oprofile_mmcra_sipr = old.oprofile_mmcra_sipr;
+ t->oprofile_mmcra_clear = old.oprofile_mmcra_clear;
+
+ /*
+ * If we have passed through this logic once before and
+ * have pulled the default case because the real PVR was
+ * not found inside cpu_specs[], then we are possibly
+ * running in compatibility mode. In that case, let the
+ * oprofiler know which set of compatibility counters to
+ * pull from by making sure the oprofile_cpu_type string
+ * is set to that of compatibility mode. If the
+ * oprofile_cpu_type already has a value, then we are
+ * possibly overriding a real PVR with a logical one,
+ * and, in that case, keep the current value for
+ * oprofile_cpu_type.
+ */
+ if (old.oprofile_cpu_type == NULL)
+ t->oprofile_cpu_type = s->oprofile_cpu_type;
+ }
+
+ *PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
+
+ /*
+ * Set the base platform string once; assumes
+ * we're called with real pvr first.
+ */
+ if (*PTRRELOC(&powerpc_base_platform) == NULL)
+ *PTRRELOC(&powerpc_base_platform) = t->platform;
+
+#if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE)
+ /* ppc64 and booke expect identify_cpu to also call setup_cpu for
+ * that processor. I will consolidate that at a later time, for now,
+ * just use #ifdef. We also don't need to PTRRELOC the function
+ * pointer on ppc64 and booke as we are running at 0 in real mode
+ * on ppc64 and reloc_offset is always 0 on booke.
+ */
+ if (s->cpu_setup) {
+ s->cpu_setup(offset, s);
+ }
+#endif /* CONFIG_PPC64 || CONFIG_BOOKE */
+}
+
struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr)
{
struct cpu_spec *s = cpu_specs;
- struct cpu_spec *t = &the_cpu_spec;
int i;
s = PTRRELOC(s);
- t = PTRRELOC(t);
- for (i = 0; i < ARRAY_SIZE(cpu_specs); i++,s++)
+ for (i = 0; i < ARRAY_SIZE(cpu_specs); i++,s++) {
if ((pvr & s->pvr_mask) == s->pvr_value) {
- /*
- * If we are overriding a previous value derived
- * from the real PVR with a new value obtained
- * using a logical PVR value, don't modify the
- * performance monitor fields.
- */
- if (t->num_pmcs && !s->num_pmcs) {
- t->cpu_name = s->cpu_name;
- t->cpu_features = s->cpu_features;
- t->cpu_user_features = s->cpu_user_features;
- t->icache_bsize = s->icache_bsize;
- t->dcache_bsize = s->dcache_bsize;
- t->cpu_setup = s->cpu_setup;
- t->cpu_restore = s->cpu_restore;
- t->platform = s->platform;
- /*
- * If we have passed through this logic once
- * before and have pulled the default case
- * because the real PVR was not found inside
- * cpu_specs[], then we are possibly running in
- * compatibility mode. In that case, let the
- * oprofiler know which set of compatibility
- * counters to pull from by making sure the
- * oprofile_cpu_type string is set to that of
- * compatibility mode. If the oprofile_cpu_type
- * already has a value, then we are possibly
- * overriding a real PVR with a logical one, and,
- * in that case, keep the current value for
- * oprofile_cpu_type.
- */
- if (t->oprofile_cpu_type == NULL)
- t->oprofile_cpu_type = s->oprofile_cpu_type;
- } else
- *t = *s;
- *PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
-
- /*
- * Set the base platform string once; assumes
- * we're called with real pvr first.
- */
- if (*PTRRELOC(&powerpc_base_platform) == NULL)
- *PTRRELOC(&powerpc_base_platform) = t->platform;
-
-#if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE)
- /* ppc64 and booke expect identify_cpu to also call
- * setup_cpu for that processor. I will consolidate
- * that at a later time, for now, just use #ifdef.
- * we also don't need to PTRRELOC the function pointer
- * on ppc64 and booke as we are running at 0 in real
- * mode on ppc64 and reloc_offset is always 0 on booke.
- */
- if (s->cpu_setup) {
- s->cpu_setup(offset, s);
- }
-#endif /* CONFIG_PPC64 || CONFIG_BOOKE */
+ setup_cpu_spec(offset, s);
return s;
}
+ }
+
BUG();
+
return NULL;
}
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 19671ac..5fb667a 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -48,7 +48,7 @@
* branch to "addr" we jump to ("addr" + 32 MB). Although it requires
* two instructions it doesn't require any registers.
*/
- patch_instruction(p, PPC_NOP_INSTR);
+ patch_instruction(p, PPC_INST_NOP);
patch_branch(++p, addr + PHYSICAL_START, 0);
}
diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c
new file mode 100644
index 0000000..1493734
--- /dev/null
+++ b/arch/powerpc/kernel/dbell.c
@@ -0,0 +1,44 @@
+/*
+ * Author: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+
+#include <asm/dbell.h>
+
+#ifdef CONFIG_SMP
+unsigned long dbell_smp_message[NR_CPUS];
+
+void smp_dbell_message_pass(int target, int msg)
+{
+ int i;
+
+ if(target < NR_CPUS) {
+ set_bit(msg, &dbell_smp_message[target]);
+ ppc_msgsnd(PPC_DBELL, 0, target);
+ }
+ else if(target == MSG_ALL_BUT_SELF) {
+ for_each_online_cpu(i) {
+ if (i == smp_processor_id())
+ continue;
+ set_bit(msg, &dbell_smp_message[i]);
+ ppc_msgsnd(PPC_DBELL, 0, i);
+ }
+ }
+ else { /* target == MSG_ALL */
+ for_each_online_cpu(i)
+ set_bit(msg, &dbell_smp_message[i]);
+ ppc_msgsnd(PPC_DBELL, PPC_DBELL_MSG_BRDCAST, 0);
+ }
+}
+#endif
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 6f7eb7e..4dd38f1 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -63,7 +63,7 @@
.globl crit_transfer_to_handler
crit_transfer_to_handler:
-#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_PPC_BOOK3E_MMU
mfspr r0,SPRN_MAS0
stw r0,MAS0(r11)
mfspr r0,SPRN_MAS1
@@ -78,7 +78,7 @@
mfspr r0,SPRN_MAS7
stw r0,MAS7(r11)
#endif /* CONFIG_PHYS_64BIT */
-#endif /* CONFIG_FSL_BOOKE */
+#endif /* CONFIG_PPC_BOOK3E_MMU */
#ifdef CONFIG_44x
mfspr r0,SPRN_MMUCR
stw r0,MMUCR(r11)
@@ -914,7 +914,7 @@
mtspr SPRN_##exc_lvl_srr0,r9; \
mtspr SPRN_##exc_lvl_srr1,r10;
-#if defined(CONFIG_FSL_BOOKE)
+#if defined(CONFIG_PPC_BOOK3E_MMU)
#ifdef CONFIG_PHYS_64BIT
#define RESTORE_MAS7 \
lwz r11,MAS7(r1); \
@@ -956,7 +956,7 @@
lwz r10,crit_srr1@l(r10);
mtspr SPRN_SRR0,r9;
mtspr SPRN_SRR1,r10;
- RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI)
+ RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, PPC_RFCI)
#endif /* CONFIG_40x */
#ifdef CONFIG_BOOKE
@@ -967,7 +967,7 @@
stw r10,KSP_LIMIT(r9)
RESTORE_xSRR(SRR0,SRR1);
RESTORE_MMU_REGS;
- RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI)
+ RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, PPC_RFCI)
.globl ret_from_debug_exc
ret_from_debug_exc:
@@ -981,7 +981,7 @@
RESTORE_xSRR(SRR0,SRR1);
RESTORE_xSRR(CSRR0,CSRR1);
RESTORE_MMU_REGS;
- RET_FROM_EXC_LEVEL(SPRN_DSRR0, SPRN_DSRR1, RFDI)
+ RET_FROM_EXC_LEVEL(SPRN_DSRR0, SPRN_DSRR1, PPC_RFDI)
.globl ret_from_mcheck_exc
ret_from_mcheck_exc:
@@ -992,7 +992,7 @@
RESTORE_xSRR(CSRR0,CSRR1);
RESTORE_xSRR(DSRR0,DSRR1);
RESTORE_MMU_REGS;
- RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, RFMCI)
+ RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, PPC_RFMCI)
#endif /* CONFIG_BOOKE */
/*
@@ -1176,59 +1176,27 @@
bctr
_GLOBAL(ftrace_caller)
- /* Based off of objdump optput from glibc */
- stwu r1,-48(r1)
- stw r3, 12(r1)
- stw r4, 16(r1)
- stw r5, 20(r1)
- stw r6, 24(r1)
- mflr r3
- lwz r4, 52(r1)
- mfcr r5
- stw r7, 28(r1)
- stw r8, 32(r1)
- stw r9, 36(r1)
- stw r10,40(r1)
- stw r3, 44(r1)
- stw r5, 8(r1)
+ MCOUNT_SAVE_FRAME
+ /* r3 ends up with link register */
subi r3, r3, MCOUNT_INSN_SIZE
.globl ftrace_call
ftrace_call:
bl ftrace_stub
nop
- lwz r6, 8(r1)
- lwz r0, 44(r1)
- lwz r3, 12(r1)
- mtctr r0
- lwz r4, 16(r1)
- mtcr r6
- lwz r5, 20(r1)
- lwz r6, 24(r1)
- lwz r0, 52(r1)
- lwz r7, 28(r1)
- lwz r8, 32(r1)
- mtlr r0
- lwz r9, 36(r1)
- lwz r10,40(r1)
- addi r1, r1, 48
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+.globl ftrace_graph_call
+ftrace_graph_call:
+ b ftrace_graph_stub
+_GLOBAL(ftrace_graph_stub)
+#endif
+ MCOUNT_RESTORE_FRAME
+ /* old link register ends up in ctr reg */
bctr
#else
_GLOBAL(mcount)
_GLOBAL(_mcount)
- stwu r1,-48(r1)
- stw r3, 12(r1)
- stw r4, 16(r1)
- stw r5, 20(r1)
- stw r6, 24(r1)
- mflr r3
- lwz r4, 52(r1)
- mfcr r5
- stw r7, 28(r1)
- stw r8, 32(r1)
- stw r9, 36(r1)
- stw r10,40(r1)
- stw r3, 44(r1)
- stw r5, 8(r1)
+
+ MCOUNT_SAVE_FRAME
subi r3, r3, MCOUNT_INSN_SIZE
LOAD_REG_ADDR(r5, ftrace_trace_function)
@@ -1236,28 +1204,55 @@
mtctr r5
bctrl
-
nop
- lwz r6, 8(r1)
- lwz r0, 44(r1)
- lwz r3, 12(r1)
- mtctr r0
- lwz r4, 16(r1)
- mtcr r6
- lwz r5, 20(r1)
- lwz r6, 24(r1)
- lwz r0, 52(r1)
- lwz r7, 28(r1)
- lwz r8, 32(r1)
- mtlr r0
- lwz r9, 36(r1)
- lwz r10,40(r1)
- addi r1, r1, 48
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ b ftrace_graph_caller
+#endif
+ MCOUNT_RESTORE_FRAME
bctr
#endif
_GLOBAL(ftrace_stub)
blr
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+_GLOBAL(ftrace_graph_caller)
+ /* load r4 with local address */
+ lwz r4, 44(r1)
+ subi r4, r4, MCOUNT_INSN_SIZE
+
+ /* get the parent address */
+ addi r3, r1, 52
+
+ bl prepare_ftrace_return
+ nop
+
+ MCOUNT_RESTORE_FRAME
+ /* old link register ends up in ctr reg */
+ bctr
+
+_GLOBAL(return_to_handler)
+ /* need to save return values */
+ stwu r1, -32(r1)
+ stw r3, 20(r1)
+ stw r4, 16(r1)
+ stw r31, 12(r1)
+ mr r31, r1
+
+ bl ftrace_return_to_handler
+ nop
+
+ /* return value has real return address */
+ mtlr r3
+
+ lwz r3, 20(r1)
+ lwz r4, 16(r1)
+ lwz r31,12(r1)
+ lwz r1, 0(r1)
+
+ /* Jump back to real return address */
+ blr
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
#endif /* CONFIG_MCOUNT */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 383ed6e..abfc323 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -908,6 +908,12 @@
ftrace_call:
bl ftrace_stub
nop
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+.globl ftrace_graph_call
+ftrace_graph_call:
+ b ftrace_graph_stub
+_GLOBAL(ftrace_graph_stub)
+#endif
ld r0, 128(r1)
mtlr r0
addi r1, r1, 112
@@ -931,13 +937,90 @@
ld r5,0(r5)
mtctr r5
bctrl
-
nop
+
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ b ftrace_graph_caller
+#endif
ld r0, 128(r1)
mtlr r0
addi r1, r1, 112
_GLOBAL(ftrace_stub)
blr
-#endif
-#endif
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+_GLOBAL(ftrace_graph_caller)
+ /* load r4 with local address */
+ ld r4, 128(r1)
+ subi r4, r4, MCOUNT_INSN_SIZE
+
+ /* get the parent address */
+ ld r11, 112(r1)
+ addi r3, r11, 16
+
+ bl .prepare_ftrace_return
+ nop
+
+ ld r0, 128(r1)
+ mtlr r0
+ addi r1, r1, 112
+ blr
+
+_GLOBAL(return_to_handler)
+ /* need to save return values */
+ std r4, -24(r1)
+ std r3, -16(r1)
+ std r31, -8(r1)
+ mr r31, r1
+ stdu r1, -112(r1)
+
+ bl .ftrace_return_to_handler
+ nop
+
+ /* return value has real return address */
+ mtlr r3
+
+ ld r1, 0(r1)
+ ld r4, -24(r1)
+ ld r3, -16(r1)
+ ld r31, -8(r1)
+
+ /* Jump back to real return address */
+ blr
+
+_GLOBAL(mod_return_to_handler)
+ /* need to save return values */
+ std r4, -32(r1)
+ std r3, -24(r1)
+ /* save TOC */
+ std r2, -16(r1)
+ std r31, -8(r1)
+ mr r31, r1
+ stdu r1, -112(r1)
+
+ /*
+ * We are in a module using the module's TOC.
+ * Switch to our TOC to run inside the core kernel.
+ */
+ LOAD_REG_IMMEDIATE(r4,ftrace_return_to_handler)
+ ld r2, 8(r4)
+
+ bl .ftrace_return_to_handler
+ nop
+
+ /* return value has real return address */
+ mtlr r3
+
+ ld r1, 0(r1)
+ ld r4, -32(r1)
+ ld r3, -24(r1)
+ ld r2, -16(r1)
+ ld r31, -8(r1)
+
+ /* Jump back to real return address */
+ blr
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+#endif /* CONFIG_FUNCTION_TRACER */
diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index 60c60cc..5b5d16b 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -5,6 +5,9 @@
*
* Thanks goes out to P.A. Semi, Inc for supplying me with a PPC64 box.
*
+ * Added function graph tracer code, taken from x86 that was written
+ * by Frederic Weisbecker, and ported to PPC by Steven Rostedt.
+ *
*/
#include <linux/spinlock.h>
@@ -20,14 +23,6 @@
#include <asm/code-patching.h>
#include <asm/ftrace.h>
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt , ...) do { } while (0)
-#endif
-
-static unsigned int ftrace_nop = PPC_NOP_INSTR;
-
#ifdef CONFIG_PPC32
# define GET_ADDR(addr) addr
#else
@@ -35,37 +30,23 @@
# define GET_ADDR(addr) (*(unsigned long *)addr)
#endif
-
-static unsigned int ftrace_calc_offset(long ip, long addr)
+#ifdef CONFIG_DYNAMIC_FTRACE
+static unsigned int ftrace_nop_replace(void)
{
- return (int)(addr - ip);
+ return PPC_INST_NOP;
}
-static unsigned char *ftrace_nop_replace(void)
+static unsigned int
+ftrace_call_replace(unsigned long ip, unsigned long addr, int link)
{
- return (char *)&ftrace_nop;
-}
+ unsigned int op;
-static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
-{
- static unsigned int op;
-
- /*
- * It would be nice to just use create_function_call, but that will
- * update the code itself. Here we need to just return the
- * instruction that is going to be modified, without modifying the
- * code.
- */
addr = GET_ADDR(addr);
- /* Set to "bl addr" */
- op = 0x48000001 | (ftrace_calc_offset(ip, addr) & 0x03fffffc);
+ /* if (link) set op to 'bl' else 'b' */
+ op = create_branch((unsigned int *)ip, addr, link ? 1 : 0);
- /*
- * No locking needed, this must be called via kstop_machine
- * which in essence is like running on a uniprocessor machine.
- */
- return (unsigned char *)&op;
+ return op;
}
#ifdef CONFIG_PPC64
@@ -77,10 +58,9 @@
#endif
static int
-ftrace_modify_code(unsigned long ip, unsigned char *old_code,
- unsigned char *new_code)
+ftrace_modify_code(unsigned long ip, unsigned int old, unsigned int new)
{
- unsigned char replaced[MCOUNT_INSN_SIZE];
+ unsigned int replaced;
/*
* Note: Due to modules and __init, code can
@@ -93,15 +73,15 @@
*/
/* read the text we want to modify */
- if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
+ if (probe_kernel_read(&replaced, (void *)ip, MCOUNT_INSN_SIZE))
return -EFAULT;
/* Make sure it is what we expect it to be */
- if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0)
+ if (replaced != old)
return -EINVAL;
/* replace the text with the new text */
- if (probe_kernel_write((void *)ip, new_code, MCOUNT_INSN_SIZE))
+ if (probe_kernel_write((void *)ip, &new, MCOUNT_INSN_SIZE))
return -EPERM;
flush_icache_range(ip, ip + 8);
@@ -119,6 +99,8 @@
return create_branch((unsigned int *)ip, addr, 0);
}
+#ifdef CONFIG_MODULES
+
static int is_bl_op(unsigned int op)
{
return (op & 0xfc000003) == 0x48000001;
@@ -175,7 +157,7 @@
* 0xe8, 0x4c, 0x00, 0x28, ld r2,40(r12)
*/
- DEBUGP("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
+ pr_debug("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
/* Find where the trampoline jumps to */
if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
@@ -183,7 +165,7 @@
return -EFAULT;
}
- DEBUGP(" %08x %08x", jmp[0], jmp[1]);
+ pr_debug(" %08x %08x", jmp[0], jmp[1]);
/* verify that this is what we expect it to be */
if (((jmp[0] & 0xffff0000) != 0x3d820000) ||
@@ -199,18 +181,18 @@
offset = ((unsigned)((unsigned short)jmp[0]) << 16) +
(int)((short)jmp[1]);
- DEBUGP(" %x ", offset);
+ pr_debug(" %x ", offset);
/* get the address this jumps too */
tramp = mod->arch.toc + offset + 32;
- DEBUGP("toc: %lx", tramp);
+ pr_debug("toc: %lx", tramp);
if (probe_kernel_read(jmp, (void *)tramp, 8)) {
printk(KERN_ERR "Failed to read %lx\n", tramp);
return -EFAULT;
}
- DEBUGP(" %08x %08x\n", jmp[0], jmp[1]);
+ pr_debug(" %08x %08x\n", jmp[0], jmp[1]);
ptr = ((unsigned long)jmp[0] << 32) + jmp[1];
@@ -287,7 +269,7 @@
* 0x4e, 0x80, 0x04, 0x20 bctr
*/
- DEBUGP("ip:%lx jumps to %lx", ip, tramp);
+ pr_debug("ip:%lx jumps to %lx", ip, tramp);
/* Find where the trampoline jumps to */
if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
@@ -295,7 +277,7 @@
return -EFAULT;
}
- DEBUGP(" %08x %08x ", jmp[0], jmp[1]);
+ pr_debug(" %08x %08x ", jmp[0], jmp[1]);
/* verify that this is what we expect it to be */
if (((jmp[0] & 0xffff0000) != 0x3d600000) ||
@@ -311,7 +293,7 @@
if (tramp & 0x8000)
tramp -= 0x10000;
- DEBUGP(" %x ", tramp);
+ pr_debug(" %x ", tramp);
if (tramp != addr) {
printk(KERN_ERR
@@ -320,7 +302,7 @@
return -EINVAL;
}
- op = PPC_NOP_INSTR;
+ op = PPC_INST_NOP;
if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE))
return -EPERM;
@@ -330,12 +312,13 @@
return 0;
}
#endif /* PPC64 */
+#endif /* CONFIG_MODULES */
int ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr)
{
- unsigned char *old, *new;
unsigned long ip = rec->ip;
+ unsigned int old, new;
/*
* If the calling address is more that 24 bits away,
@@ -344,11 +327,12 @@
*/
if (test_24bit_addr(ip, addr)) {
/* within range */
- old = ftrace_call_replace(ip, addr);
+ old = ftrace_call_replace(ip, addr, 1);
new = ftrace_nop_replace();
return ftrace_modify_code(ip, old, new);
}
+#ifdef CONFIG_MODULES
/*
* Out of range jumps are called from modules.
* We should either already have a pointer to the module
@@ -373,9 +357,13 @@
mod = rec->arch.mod;
return __ftrace_make_nop(mod, rec, addr);
-
+#else
+ /* We should not get here without modules */
+ return -EINVAL;
+#endif /* CONFIG_MODULES */
}
+#ifdef CONFIG_MODULES
#ifdef CONFIG_PPC64
static int
__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
@@ -392,7 +380,7 @@
* b +8; ld r2,40(r1)
*/
if (((op[0] != 0x48000008) || (op[1] != 0xe8410028)) &&
- ((op[0] != PPC_NOP_INSTR) || (op[1] != PPC_NOP_INSTR))) {
+ ((op[0] != PPC_INST_NOP) || (op[1] != PPC_INST_NOP))) {
printk(KERN_ERR "Expected NOPs but have %x %x\n", op[0], op[1]);
return -EINVAL;
}
@@ -414,7 +402,7 @@
/* ld r2,40(r1) */
op[1] = 0xe8410028;
- DEBUGP("write to %lx\n", rec->ip);
+ pr_debug("write to %lx\n", rec->ip);
if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2))
return -EPERM;
@@ -435,7 +423,7 @@
return -EFAULT;
/* It should be pointing to a nop */
- if (op != PPC_NOP_INSTR) {
+ if (op != PPC_INST_NOP) {
printk(KERN_ERR "Expected NOP but have %x\n", op);
return -EINVAL;
}
@@ -454,7 +442,7 @@
return -EINVAL;
}
- DEBUGP("write to %lx\n", rec->ip);
+ pr_debug("write to %lx\n", rec->ip);
if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE))
return -EPERM;
@@ -464,11 +452,12 @@
return 0;
}
#endif /* CONFIG_PPC64 */
+#endif /* CONFIG_MODULES */
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
- unsigned char *old, *new;
unsigned long ip = rec->ip;
+ unsigned int old, new;
/*
* If the calling address is more that 24 bits away,
@@ -478,10 +467,11 @@
if (test_24bit_addr(ip, addr)) {
/* within range */
old = ftrace_nop_replace();
- new = ftrace_call_replace(ip, addr);
+ new = ftrace_call_replace(ip, addr, 1);
return ftrace_modify_code(ip, old, new);
}
+#ifdef CONFIG_MODULES
/*
* Out of range jumps are called from modules.
* Being that we are converting from nop, it had better
@@ -493,16 +483,20 @@
}
return __ftrace_make_call(rec, addr);
+#else
+ /* We should not get here without modules */
+ return -EINVAL;
+#endif /* CONFIG_MODULES */
}
int ftrace_update_ftrace_func(ftrace_func_t func)
{
unsigned long ip = (unsigned long)(&ftrace_call);
- unsigned char old[MCOUNT_INSN_SIZE], *new;
+ unsigned int old, new;
int ret;
- memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE);
- new = ftrace_call_replace(ip, (unsigned long)func);
+ old = *(unsigned int *)&ftrace_call;
+ new = ftrace_call_replace(ip, (unsigned long)func, 1);
ret = ftrace_modify_code(ip, old, new);
return ret;
@@ -517,3 +511,115 @@
return 0;
}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+extern void ftrace_graph_call(void);
+extern void ftrace_graph_stub(void);
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+ unsigned long ip = (unsigned long)(&ftrace_graph_call);
+ unsigned long addr = (unsigned long)(&ftrace_graph_caller);
+ unsigned long stub = (unsigned long)(&ftrace_graph_stub);
+ unsigned int old, new;
+
+ old = ftrace_call_replace(ip, stub, 0);
+ new = ftrace_call_replace(ip, addr, 0);
+
+ return ftrace_modify_code(ip, old, new);
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+ unsigned long ip = (unsigned long)(&ftrace_graph_call);
+ unsigned long addr = (unsigned long)(&ftrace_graph_caller);
+ unsigned long stub = (unsigned long)(&ftrace_graph_stub);
+ unsigned int old, new;
+
+ old = ftrace_call_replace(ip, addr, 0);
+ new = ftrace_call_replace(ip, stub, 0);
+
+ return ftrace_modify_code(ip, old, new);
+}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_PPC64
+extern void mod_return_to_handler(void);
+#endif
+
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in current thread info.
+ */
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+{
+ unsigned long old;
+ unsigned long long calltime;
+ int faulted;
+ struct ftrace_graph_ent trace;
+ unsigned long return_hooker = (unsigned long)&return_to_handler;
+
+ if (unlikely(atomic_read(¤t->tracing_graph_pause)))
+ return;
+
+#if CONFIG_PPC64
+ /* non core kernel code needs to save and restore the TOC */
+ if (REGION_ID(self_addr) != KERNEL_REGION_ID)
+ return_hooker = (unsigned long)&mod_return_to_handler;
+#endif
+
+ return_hooker = GET_ADDR(return_hooker);
+
+ /*
+ * Protect against fault, even if it shouldn't
+ * happen. This tool is too much intrusive to
+ * ignore such a protection.
+ */
+ asm volatile(
+ "1: " PPC_LL "%[old], 0(%[parent])\n"
+ "2: " PPC_STL "%[return_hooker], 0(%[parent])\n"
+ " li %[faulted], 0\n"
+ "3:\n"
+
+ ".section .fixup, \"ax\"\n"
+ "4: li %[faulted], 1\n"
+ " b 3b\n"
+ ".previous\n"
+
+ ".section __ex_table,\"a\"\n"
+ PPC_LONG_ALIGN "\n"
+ PPC_LONG "1b,4b\n"
+ PPC_LONG "2b,4b\n"
+ ".previous"
+
+ : [old] "=r" (old), [faulted] "=r" (faulted)
+ : [parent] "r" (parent), [return_hooker] "r" (return_hooker)
+ : "memory"
+ );
+
+ if (unlikely(faulted)) {
+ ftrace_graph_stop();
+ WARN_ON(1);
+ return;
+ }
+
+ calltime = cpu_clock(raw_smp_processor_id());
+
+ if (ftrace_push_return_trace(old, calltime,
+ self_addr, &trace.depth) == -EBUSY) {
+ *parent = old;
+ return;
+ }
+
+ trace.func = self_addr;
+
+ /* Only trace if the calling function expects to */
+ if (!ftrace_graph_entry(&trace)) {
+ current->curr_ret_stack--;
+ *parent = old;
+ }
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index d794a63..54e68c1 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -108,18 +108,21 @@
* because OF may have I/O devices mapped into that area
* (particularly on CHRP).
*/
-#ifdef CONFIG_PPC_MULTIPLATFORM
cmpwi 0,r5,0
beq 1f
+#ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
/* find out where we are now */
bcl 20,31,$+4
0: mflr r8 /* r8 = runtime addr here */
addis r8,r8,(_stext - 0b)@ha
addi r8,r8,(_stext - 0b)@l /* current runtime base addr */
bl prom_init
+#endif /* CONFIG_PPC_OF_BOOT_TRAMPOLINE */
+
+ /* We never return. We also hit that trap if trying to boot
+ * from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */
trap
-#endif
/*
* Check for BootX signature when supporting PowerMac and branch to
@@ -472,12 +475,11 @@
. = 0x1000
InstructionTLBMiss:
/*
- * r0: stored ctr
+ * r0: scratch
* r1: linux style pte ( later becomes ppc hardware pte )
* r2: ptr to linux-style pte
* r3: scratch
*/
- mfctr r0
/* Get PTE (linux-style) and check access */
mfspr r3,SPRN_IMISS
lis r1,PAGE_OFFSET@h /* check if kernel address */
@@ -496,28 +498,27 @@
rlwinm. r2,r2,0,0,19 /* extract address of pte page */
beq- InstructionAddressInvalid /* return if no mapping */
rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
- lwz r3,0(r2) /* get linux-style pte */
- andc. r1,r1,r3 /* check access & ~permission */
+ lwz r0,0(r2) /* get linux-style pte */
+ andc. r1,r1,r0 /* check access & ~permission */
bne- InstructionAddressInvalid /* return if access not permitted */
- ori r3,r3,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
+ ori r0,r0,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
/*
* NOTE! We are assuming this is not an SMP system, otherwise
* we would need to update the pte atomically with lwarx/stwcx.
*/
- stw r3,0(r2) /* update PTE (accessed bit) */
+ stw r0,0(r2) /* update PTE (accessed bit) */
/* Convert linux-style PTE to low word of PPC-style PTE */
- rlwinm r1,r3,32-10,31,31 /* _PAGE_RW -> PP lsb */
- rlwinm r2,r3,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
+ rlwinm r1,r0,32-10,31,31 /* _PAGE_RW -> PP lsb */
+ rlwinm r2,r0,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
and r1,r1,r2 /* writable if _RW and _DIRTY */
- rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */
- rlwimi r3,r3,32-1,31,31 /* _PAGE_USER -> PP lsb */
+ rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */
+ rlwimi r0,r0,32-1,31,31 /* _PAGE_USER -> PP lsb */
ori r1,r1,0xe04 /* clear out reserved bits */
- andc r1,r3,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
+ andc r1,r0,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
BEGIN_FTR_SECTION
rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
mtspr SPRN_RPA,r1
- mfspr r3,SPRN_IMISS
tlbli r3
mfspr r3,SPRN_SRR1 /* Need to restore CR0 */
mtcrf 0x80,r3
@@ -528,7 +529,6 @@
addis r1,r1,0x2000
mtspr SPRN_DSISR,r1 /* (shouldn't be needed) */
- mtctr r0 /* Restore CTR */
andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */
or r2,r2,r1
mtspr SPRN_SRR1,r2
@@ -549,12 +549,11 @@
. = 0x1100
DataLoadTLBMiss:
/*
- * r0: stored ctr
+ * r0: scratch
* r1: linux style pte ( later becomes ppc hardware pte )
* r2: ptr to linux-style pte
* r3: scratch
*/
- mfctr r0
/* Get PTE (linux-style) and check access */
mfspr r3,SPRN_DMISS
lis r1,PAGE_OFFSET@h /* check if kernel address */
@@ -573,38 +572,48 @@
rlwinm. r2,r2,0,0,19 /* extract address of pte page */
beq- DataAddressInvalid /* return if no mapping */
rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
- lwz r3,0(r2) /* get linux-style pte */
- andc. r1,r1,r3 /* check access & ~permission */
+ lwz r0,0(r2) /* get linux-style pte */
+ andc. r1,r1,r0 /* check access & ~permission */
bne- DataAddressInvalid /* return if access not permitted */
- ori r3,r3,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
+ ori r0,r0,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
/*
* NOTE! We are assuming this is not an SMP system, otherwise
* we would need to update the pte atomically with lwarx/stwcx.
*/
- stw r3,0(r2) /* update PTE (accessed bit) */
+ stw r0,0(r2) /* update PTE (accessed bit) */
/* Convert linux-style PTE to low word of PPC-style PTE */
- rlwinm r1,r3,32-10,31,31 /* _PAGE_RW -> PP lsb */
- rlwinm r2,r3,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
+ rlwinm r1,r0,32-10,31,31 /* _PAGE_RW -> PP lsb */
+ rlwinm r2,r0,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
and r1,r1,r2 /* writable if _RW and _DIRTY */
- rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */
- rlwimi r3,r3,32-1,31,31 /* _PAGE_USER -> PP lsb */
+ rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */
+ rlwimi r0,r0,32-1,31,31 /* _PAGE_USER -> PP lsb */
ori r1,r1,0xe04 /* clear out reserved bits */
- andc r1,r3,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
+ andc r1,r0,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
BEGIN_FTR_SECTION
rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
mtspr SPRN_RPA,r1
- mfspr r3,SPRN_DMISS
+ mfspr r2,SPRN_SRR1 /* Need to restore CR0 */
+ mtcrf 0x80,r2
+BEGIN_MMU_FTR_SECTION
+ li r0,1
+ mfspr r1,SPRN_SPRG4
+ rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */
+ slw r0,r0,r2
+ xor r1,r0,r1
+ srw r0,r1,r2
+ mtspr SPRN_SPRG4,r1
+ mfspr r2,SPRN_SRR1
+ rlwimi r2,r0,31-14,14,14
+ mtspr SPRN_SRR1,r2
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
tlbld r3
- mfspr r3,SPRN_SRR1 /* Need to restore CR0 */
- mtcrf 0x80,r3
rfi
DataAddressInvalid:
mfspr r3,SPRN_SRR1
rlwinm r1,r3,9,6,6 /* Get load/store bit */
addis r1,r1,0x2000
mtspr SPRN_DSISR,r1
- mtctr r0 /* Restore CTR */
andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */
mtspr SPRN_SRR1,r2
mfspr r1,SPRN_DMISS /* Get failing address */
@@ -624,12 +633,11 @@
. = 0x1200
DataStoreTLBMiss:
/*
- * r0: stored ctr
+ * r0: scratch
* r1: linux style pte ( later becomes ppc hardware pte )
* r2: ptr to linux-style pte
* r3: scratch
*/
- mfctr r0
/* Get PTE (linux-style) and check access */
mfspr r3,SPRN_DMISS
lis r1,PAGE_OFFSET@h /* check if kernel address */
@@ -648,27 +656,38 @@
rlwinm. r2,r2,0,0,19 /* extract address of pte page */
beq- DataAddressInvalid /* return if no mapping */
rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
- lwz r3,0(r2) /* get linux-style pte */
- andc. r1,r1,r3 /* check access & ~permission */
+ lwz r0,0(r2) /* get linux-style pte */
+ andc. r1,r1,r0 /* check access & ~permission */
bne- DataAddressInvalid /* return if access not permitted */
- ori r3,r3,_PAGE_ACCESSED|_PAGE_DIRTY
+ ori r0,r0,_PAGE_ACCESSED|_PAGE_DIRTY
/*
* NOTE! We are assuming this is not an SMP system, otherwise
* we would need to update the pte atomically with lwarx/stwcx.
*/
- stw r3,0(r2) /* update PTE (accessed/dirty bits) */
+ stw r0,0(r2) /* update PTE (accessed/dirty bits) */
/* Convert linux-style PTE to low word of PPC-style PTE */
- rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */
+ rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */
li r1,0xe05 /* clear out reserved bits & PP lsb */
- andc r1,r3,r1 /* PP = user? 2: 0 */
+ andc r1,r0,r1 /* PP = user? 2: 0 */
BEGIN_FTR_SECTION
rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
mtspr SPRN_RPA,r1
- mfspr r3,SPRN_DMISS
+ mfspr r2,SPRN_SRR1 /* Need to restore CR0 */
+ mtcrf 0x80,r2
+BEGIN_MMU_FTR_SECTION
+ li r0,1
+ mfspr r1,SPRN_SPRG4
+ rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */
+ slw r0,r0,r2
+ xor r1,r0,r1
+ srw r0,r1,r2
+ mtspr SPRN_SPRG4,r1
+ mfspr r2,SPRN_SRR1
+ rlwimi r2,r0,31-14,14,14
+ mtspr SPRN_SRR1,r2
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
tlbld r3
- mfspr r3,SPRN_SRR1 /* Need to restore CR0 */
- mtcrf 0x80,r3
rfi
#ifndef CONFIG_ALTIVEC
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index ebaedaf..50ef505 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -1360,6 +1360,7 @@
b .__after_prom_start
_INIT_STATIC(__boot_from_prom)
+#ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
/* Save parameters */
mr r31,r3
mr r30,r4
@@ -1390,7 +1391,10 @@
/* Do all of the interaction with OF client interface */
mr r8,r26
bl .prom_init
- /* We never return */
+#endif /* #CONFIG_PPC_OF_BOOT_TRAMPOLINE */
+
+ /* We never return. We also hit that trap if trying to boot
+ * from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */
trap
_STATIC(__after_prom_start)
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index fce2df9..95f39f1 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -10,6 +10,15 @@
mtspr SPRN_IVOR##vector_number,r26; \
sync
+#if (THREAD_SHIFT < 15)
+#define ALLOC_STACK_FRAME(reg, val) \
+ addi reg,reg,val
+#else
+#define ALLOC_STACK_FRAME(reg, val) \
+ addis reg,reg,val@ha; \
+ addi reg,reg,val@l
+#endif
+
#define NORMAL_EXCEPTION_PROLOG \
mtspr SPRN_SPRG0,r10; /* save two registers to work with */\
mtspr SPRN_SPRG1,r11; \
@@ -20,7 +29,7 @@
beq 1f; \
mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\
lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
- addi r1,r1,THREAD_SIZE; \
+ ALLOC_STACK_FRAME(r1, THREAD_SIZE); \
1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
mr r11,r1; \
stw r10,_CCR(r11); /* save various registers */\
@@ -70,10 +79,10 @@
/* only on e500mc/e200 */
#define DEBUG_STACK_BASE dbgirq_ctx
-#ifdef CONFIG_PPC_E500MC
-#define DEBUG_SPRG SPRN_SPRG9
-#else
+#ifdef CONFIG_E200
#define DEBUG_SPRG SPRN_SPRG6W
+#else
+#define DEBUG_SPRG SPRN_SPRG9
#endif
#define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
@@ -279,7 +288,7 @@
lwz r11,GPR11(r8); \
mfspr r8,DEBUG_SPRG; \
\
- RFDI; \
+ PPC_RFDI; \
b .; \
\
/* continue normal handling for a debug exception... */ \
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 36ffb35..4c22620 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -103,10 +103,15 @@
or r7,r7,r4
mtspr SPRN_MAS6,r7
tlbsx 0,r6 /* search MSR[IS], SPID=PID0 */
-#ifndef CONFIG_E200
mfspr r7,SPRN_MAS1
andis. r7,r7,MAS1_VALID@h
bne match_TLB
+
+ mfspr r7,SPRN_MMUCFG
+ rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */
+ cmpwi r7,3
+ bne match_TLB /* skip if NPIDS != 3 */
+
mfspr r7,SPRN_PID1
slwi r7,r7,16
or r7,r7,r4
@@ -120,7 +125,7 @@
or r7,r7,r4
mtspr SPRN_MAS6,r7
tlbsx 0,r6 /* Fall through, we had to match */
-#endif
+
match_TLB:
mfspr r7,SPRN_MAS0
rlwinm r3,r7,16,20,31 /* Extract MAS0(Entry) */
@@ -168,7 +173,7 @@
/* grab and fixup the RPN */
mfspr r6,SPRN_MAS1 /* extract MAS1[SIZE] */
- rlwinm r6,r6,25,27,30
+ rlwinm r6,r6,25,27,31
li r8,-1
addi r6,r6,10
slw r6,r8,r6 /* convert to mask */
@@ -194,7 +199,7 @@
xori r6,r4,1 /* Setup TMP mapping in the other Address space */
slwi r6,r6,12
oris r6,r6,(MAS1_VALID|MAS1_IPROT)@h
- ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
+ ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l
mtspr SPRN_MAS1,r6
mfspr r6,SPRN_MAS2
li r7,0 /* temp EPN = 0 */
@@ -215,14 +220,19 @@
/* 4. Clear out PIDs & Search info */
li r6,0
+ mtspr SPRN_MAS6,r6
mtspr SPRN_PID0,r6
-#ifndef CONFIG_E200
+
+ mfspr r7,SPRN_MMUCFG
+ rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */
+ cmpwi r7,3
+ bne 2f /* skip if NPIDS != 3 */
+
mtspr SPRN_PID1,r6
mtspr SPRN_PID2,r6
-#endif
- mtspr SPRN_MAS6,r6
/* 5. Invalidate mapping we started in */
+2:
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
mtspr SPRN_MAS0,r7
@@ -247,10 +257,10 @@
lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
mtspr SPRN_MAS0,r6
lis r6,(MAS1_VALID|MAS1_IPROT)@h
- ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l
+ ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
mtspr SPRN_MAS1,r6
- lis r6,MAS2_VAL(PAGE_OFFSET, BOOKE_PAGESZ_64M, M_IF_SMP)@h
- ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOKE_PAGESZ_64M, M_IF_SMP)@l
+ lis r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
+ ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
mtspr SPRN_MAS2,r6
mtspr SPRN_MAS3,r8
tlbwe
@@ -298,26 +308,14 @@
SET_IVOR(12, WatchdogTimer);
SET_IVOR(13, DataTLBError);
SET_IVOR(14, InstructionTLBError);
- SET_IVOR(15, DebugDebug);
-#if defined(CONFIG_E500) && !defined(CONFIG_PPC_E500MC)
SET_IVOR(15, DebugCrit);
-#endif
- SET_IVOR(32, SPEUnavailable);
- SET_IVOR(33, SPEFloatingPointData);
- SET_IVOR(34, SPEFloatingPointRound);
-#ifndef CONFIG_E200
- SET_IVOR(35, PerformanceMonitor);
-#endif
-#ifdef CONFIG_PPC_E500MC
- SET_IVOR(36, Doorbell);
-#endif
/* Establish the interrupt vector base */
lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
mtspr SPRN_IVPR,r4
/* Setup the defaults for TLB entries */
- li r2,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l
+ li r2,(MAS4_TSIZED(BOOK3E_PAGESZ_4K))@l
#ifdef CONFIG_E200
oris r2,r2,MAS4_TLBSELD(1)@h
#endif
@@ -329,12 +327,6 @@
oris r2,r2,HID0_DOZE@h
mtspr SPRN_HID0, r2
#endif
-#ifdef CONFIG_E200
- /* enable dedicated debug exception handling resources (Debug APU) */
- mfspr r2,SPRN_HID0
- ori r2,r2,HID0_DAPUEN@l
- mtspr SPRN_HID0,r2
-#endif
#if !defined(CONFIG_BDI_SWITCH)
/*
@@ -706,15 +698,13 @@
/* Performance Monitor */
EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD)
-#ifdef CONFIG_PPC_E500MC
- EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_STD)
-#endif
+ EXCEPTION(0x2070, Doorbell, doorbell_exception, EXC_XFER_STD)
+
+ CRITICAL_EXCEPTION(0x2080, CriticalDoorbell, unknown_exception)
/* Debug Interrupt */
DEBUG_DEBUG_EXCEPTION
-#if defined(CONFIG_E500) && !defined(CONFIG_PPC_E500MC)
DEBUG_CRIT_EXCEPTION
-#endif
/*
* Local functions
@@ -897,6 +887,47 @@
* Global functions
*/
+/* Adjust or setup IVORs for e200 */
+_GLOBAL(__setup_e200_ivors)
+ li r3,DebugDebug@l
+ mtspr SPRN_IVOR15,r3
+ li r3,SPEUnavailable@l
+ mtspr SPRN_IVOR32,r3
+ li r3,SPEFloatingPointData@l
+ mtspr SPRN_IVOR33,r3
+ li r3,SPEFloatingPointRound@l
+ mtspr SPRN_IVOR34,r3
+ sync
+ blr
+
+/* Adjust or setup IVORs for e500v1/v2 */
+_GLOBAL(__setup_e500_ivors)
+ li r3,DebugCrit@l
+ mtspr SPRN_IVOR15,r3
+ li r3,SPEUnavailable@l
+ mtspr SPRN_IVOR32,r3
+ li r3,SPEFloatingPointData@l
+ mtspr SPRN_IVOR33,r3
+ li r3,SPEFloatingPointRound@l
+ mtspr SPRN_IVOR34,r3
+ li r3,PerformanceMonitor@l
+ mtspr SPRN_IVOR35,r3
+ sync
+ blr
+
+/* Adjust or setup IVORs for e500mc */
+_GLOBAL(__setup_e500mc_ivors)
+ li r3,DebugDebug@l
+ mtspr SPRN_IVOR15,r3
+ li r3,PerformanceMonitor@l
+ mtspr SPRN_IVOR35,r3
+ li r3,Doorbell@l
+ mtspr SPRN_IVOR36,r3
+ li r3,CriticalDoorbell@l
+ mtspr SPRN_IVOR37,r3
+ sync
+ blr
+
/*
* extern void loadcam_entry(unsigned int index)
*
@@ -1089,7 +1120,7 @@
mtspr SPRN_SPRG3,r4
/* Setup the defaults for TLB entries */
- li r4,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l
+ li r4,(MAS4_TSIZED(BOOK3E_PAGESZ_4K))@l
mtspr SPRN_MAS4,r4
/* Jump to start_secondary */
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 1b55ffd..5576147 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -171,7 +171,7 @@
{
int i = *(loff_t *)v, j;
struct irqaction *action;
- irq_desc_t *desc;
+ struct irq_desc *desc;
unsigned long flags;
if (i == 0) {
@@ -1038,7 +1038,7 @@
static int virq_debug_show(struct seq_file *m, void *private)
{
unsigned long flags;
- irq_desc_t *desc;
+ struct irq_desc *desc;
const char *p;
char none[] = "none";
int i;
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 8992b03..8fbb125 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -329,7 +329,7 @@
restore r2. */
static int restore_r2(u32 *instruction, struct module *me)
{
- if (*instruction != PPC_NOP_INSTR) {
+ if (*instruction != PPC_INST_NOP) {
printk("%s: Expect noop after relocate, got %08x\n",
me->name, *instruction);
return 0;
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 0f41812..9c69e7e 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -38,6 +38,7 @@
#include <asm/eeh.h>
static DEFINE_SPINLOCK(hose_spinlock);
+LIST_HEAD(hose_list);
/* XXX kill that some day ... */
static int global_phb_number; /* Global phb counter */
@@ -49,7 +50,7 @@
unsigned int ppc_pci_flags = 0;
-static struct dma_mapping_ops *pci_dma_ops;
+static struct dma_mapping_ops *pci_dma_ops = &dma_direct_ops;
void set_pci_dma_ops(struct dma_mapping_ops *dma_ops)
{
@@ -113,19 +114,24 @@
kfree(phb);
}
+static resource_size_t pcibios_io_size(const struct pci_controller *hose)
+{
+#ifdef CONFIG_PPC64
+ return hose->pci_io_size;
+#else
+ return hose->io_resource.end - hose->io_resource.start + 1;
+#endif
+}
+
int pcibios_vaddr_is_ioport(void __iomem *address)
{
int ret = 0;
struct pci_controller *hose;
- unsigned long size;
+ resource_size_t size;
spin_lock(&hose_spinlock);
list_for_each_entry(hose, &hose_list, list_node) {
-#ifdef CONFIG_PPC64
- size = hose->pci_io_size;
-#else
- size = hose->io_resource.end - hose->io_resource.start + 1;
-#endif
+ size = pcibios_io_size(hose);
if (address >= hose->io_base_virt &&
address < (hose->io_base_virt + size)) {
ret = 1;
@@ -136,6 +142,29 @@
return ret;
}
+unsigned long pci_address_to_pio(phys_addr_t address)
+{
+ struct pci_controller *hose;
+ resource_size_t size;
+ unsigned long ret = ~0;
+
+ spin_lock(&hose_spinlock);
+ list_for_each_entry(hose, &hose_list, list_node) {
+ size = pcibios_io_size(hose);
+ if (address >= hose->io_base_phys &&
+ address < (hose->io_base_phys + size)) {
+ unsigned long base =
+ (unsigned long)hose->io_base_virt - _IO_BASE;
+ ret = base + (address - hose->io_base_phys);
+ break;
+ }
+ }
+ spin_unlock(&hose_spinlock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pci_address_to_pio);
+
/*
* Return the domain number for this bus.
*/
@@ -1453,7 +1482,7 @@
* we proceed to assigning things that were left unassigned
*/
if (!(ppc_pci_flags & PPC_PCI_PROBE_ONLY)) {
- pr_debug("PCI: Assigning unassigned resouces...\n");
+ pr_debug("PCI: Assigning unassigned resources...\n");
pci_assign_unassigned_resources();
}
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 132cd80..d473634 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -20,6 +20,7 @@
#include <asm/prom.h>
#include <asm/sections.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
#include <asm/byteorder.h>
#include <asm/uaccess.h>
#include <asm/machdep.h>
@@ -43,8 +44,6 @@
*/
static int pci_assign_all_buses;
-LIST_HEAD(hose_list);
-
static int pci_bus_count;
/* This will remain NULL for now, until isa-bridge.c is made common
@@ -219,16 +218,23 @@
static struct device_node *scan_OF_for_pci_dev(struct device_node *parent,
unsigned int devfn)
{
- struct device_node *np;
+ struct device_node *np, *cnp;
const u32 *reg;
unsigned int psize;
for_each_child_of_node(parent, np) {
reg = of_get_property(np, "reg", &psize);
- if (reg == NULL || psize < 4)
- continue;
- if (((reg[0] >> 8) & 0xff) == devfn)
+ if (reg && psize >= 4 && ((reg[0] >> 8) & 0xff) == devfn)
return np;
+
+ /* Note: some OFs create a parent node "multifunc-device" as
+ * a fake root for all functions of a multi-function device,
+ * we go down them as well. */
+ if (!strcmp(np->name, "multifunc-device")) {
+ cnp = scan_OF_for_pci_dev(np, devfn);
+ if (cnp)
+ return cnp;
+ }
}
return NULL;
}
@@ -491,24 +497,6 @@
return result;
}
-unsigned long pci_address_to_pio(phys_addr_t address)
-{
- struct pci_controller *hose, *tmp;
-
- list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
- unsigned int size = hose->io_resource.end -
- hose->io_resource.start + 1;
- if (address >= hose->io_base_phys &&
- address < (hose->io_base_phys + size)) {
- unsigned long base =
- (unsigned long)hose->io_base_virt - _IO_BASE;
- return base + (address - hose->io_base_phys);
- }
- }
- return (unsigned int)-1;
-}
-EXPORT_SYMBOL(pci_address_to_pio);
-
/*
* Null PCI config access functions, for the case when we can't
* find a hose.
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index ea8eda8..be574fc 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -43,8 +43,6 @@
unsigned long pci_io_base = ISA_IO_BASE;
EXPORT_SYMBOL(pci_io_base);
-LIST_HEAD(hose_list);
-
static void fixup_broken_pcnet32(struct pci_dev* dev)
{
if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
@@ -524,23 +522,6 @@
}
EXPORT_SYMBOL_GPL(pcibios_map_io_space);
-unsigned long pci_address_to_pio(phys_addr_t address)
-{
- struct pci_controller *hose, *tmp;
-
- list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
- if (address >= hose->io_base_phys &&
- address < (hose->io_base_phys + hose->pci_io_size)) {
- unsigned long base =
- (unsigned long)hose->io_base_virt - _IO_BASE;
- return base + (address - hose->io_base_phys);
- }
- }
- return (unsigned int)-1;
-}
-EXPORT_SYMBOL_GPL(pci_address_to_pio);
-
-
#define IOBASE_BRIDGE_NUMBER 0
#define IOBASE_MEMORY 1
#define IOBASE_IO 2
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index fb7049c..eac0649 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -33,7 +33,10 @@
#include <linux/mqueue.h>
#include <linux/hardirq.h>
#include <linux/utsname.h>
+#include <linux/ftrace.h>
#include <linux/kernel_stat.h>
+#include <linux/personality.h>
+#include <linux/random.h>
#include <asm/pgtable.h>
#include <asm/uaccess.h>
@@ -1008,6 +1011,14 @@
unsigned long sp, ip, lr, newsp;
int count = 0;
int firstframe = 1;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ int curr_frame = current->curr_ret_stack;
+ extern void return_to_handler(void);
+ unsigned long addr = (unsigned long)return_to_handler;
+#ifdef CONFIG_PPC64
+ addr = *(unsigned long*)addr;
+#endif
+#endif
sp = (unsigned long) stack;
if (tsk == NULL)
@@ -1030,6 +1041,13 @@
ip = stack[STACK_FRAME_LR_SAVE];
if (!firstframe || ip != lr) {
printk("["REG"] ["REG"] %pS", sp, ip, (void *)ip);
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ if (ip == addr && curr_frame >= 0) {
+ printk(" (%pS)",
+ (void *)current->ret_stack[curr_frame].ret);
+ curr_frame--;
+ }
+#endif
if (firstframe)
printk(" (unreliable)");
printk("\n");
@@ -1122,3 +1140,43 @@
}
#endif /* THREAD_SHIFT < PAGE_SHIFT */
+
+unsigned long arch_align_stack(unsigned long sp)
+{
+ if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
+ sp -= get_random_int() & ~PAGE_MASK;
+ return sp & ~0xf;
+}
+
+static inline unsigned long brk_rnd(void)
+{
+ unsigned long rnd = 0;
+
+ /* 8MB for 32bit, 1GB for 64bit */
+ if (is_32bit_task())
+ rnd = (long)(get_random_int() % (1<<(23-PAGE_SHIFT)));
+ else
+ rnd = (long)(get_random_int() % (1<<(30-PAGE_SHIFT)));
+
+ return rnd << PAGE_SHIFT;
+}
+
+unsigned long arch_randomize_brk(struct mm_struct *mm)
+{
+ unsigned long ret = PAGE_ALIGN(mm->brk + brk_rnd());
+
+ if (ret < mm->brk)
+ return mm->brk;
+
+ return ret;
+}
+
+unsigned long randomize_et_dyn(unsigned long base)
+{
+ unsigned long ret = PAGE_ALIGN(base + brk_rnd());
+
+ if (ret < base)
+ return base;
+
+ return ret;
+}
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index f00f831..5ec6a9e 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -1075,11 +1075,6 @@
DBG("reserving: %llx -> %llx\n", base, size);
lmb_reserve(base, size);
}
-
-#if 0
- DBG("memory reserved, lmbs :\n");
- lmb_dump_all();
-#endif
}
#ifdef CONFIG_PHYP_DUMP
@@ -1221,6 +1216,7 @@
lmb_enforce_memory_limit(limit);
lmb_analyze();
+ lmb_dump_all();
DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 7f1b33d..2e026c0 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2283,6 +2283,8 @@
*/
prom_init_stdout();
+ prom_printf("Preparing to boot %s", RELOC(linux_banner));
+
/*
* Get default machine type. At this point, we do not differentiate
* between pSeries SMP and pSeries LPAR
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index ea3a2ec..1ac136b 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -20,7 +20,7 @@
_end enter_prom memcpy memset reloc_offset __secondary_hold
__secondary_hold_acknowledge __secondary_hold_spinloop __start
strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
-reloc_got2 kernstart_addr memstart_addr"
+reloc_got2 kernstart_addr memstart_addr linux_banner"
NM="$1"
OBJ="$2"
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index fdfe14c..ee4c760 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -46,6 +46,7 @@
struct rtas_suspend_me_data {
atomic_t working; /* number of cpus accessing this struct */
+ atomic_t done;
int token; /* ibm,suspend-me */
int error;
struct completion *complete; /* wait on this until working == 0 */
@@ -689,7 +690,7 @@
#ifdef CONFIG_PPC_PSERIES
static void rtas_percpu_suspend_me(void *info)
{
- long rc;
+ long rc = H_SUCCESS;
unsigned long msr_save;
int cpu;
struct rtas_suspend_me_data *data =
@@ -701,7 +702,8 @@
msr_save = mfmsr();
mtmsr(msr_save & ~(MSR_EE));
- rc = plpar_hcall_norets(H_JOIN);
+ while (rc == H_SUCCESS && !atomic_read(&data->done))
+ rc = plpar_hcall_norets(H_JOIN);
mtmsr(msr_save);
@@ -724,6 +726,9 @@
smp_processor_id(), rc);
data->error = rc;
}
+
+ atomic_set(&data->done, 1);
+
/* This cpu did the suspend or got an error; in either case,
* we need to prod all other other cpus out of join state.
* Extra prods are harmless.
@@ -766,6 +771,7 @@
}
atomic_set(&data.working, 0);
+ atomic_set(&data.done, 0);
data.token = rtas_token("ibm,suspend-me");
data.error = 0;
data.complete = &done;
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 705fc4b..9774f9f 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -35,6 +35,8 @@
#include <linux/debugfs.h>
#include <linux/percpu.h>
#include <linux/lmb.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/processor.h>
@@ -669,3 +671,37 @@
}
arch_initcall(powerpc_debugfs_init);
#endif
+
+static int ppc_dflt_bus_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+
+ /* We are only intereted in device addition */
+ if (action != BUS_NOTIFY_ADD_DEVICE)
+ return 0;
+
+ set_dma_ops(dev, &dma_direct_ops);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block ppc_dflt_plat_bus_notifier = {
+ .notifier_call = ppc_dflt_bus_notify,
+ .priority = INT_MAX,
+};
+
+static struct notifier_block ppc_dflt_of_bus_notifier = {
+ .notifier_call = ppc_dflt_bus_notify,
+ .priority = INT_MAX,
+};
+
+static int __init setup_bus_notifier(void)
+{
+ bus_register_notifier(&platform_bus_type, &ppc_dflt_plat_bus_notifier);
+ bus_register_notifier(&of_platform_bus_type, &ppc_dflt_of_bus_notifier);
+
+ return 0;
+}
+
+arch_initcall(setup_bus_notifier);
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 2d34196..c410c60 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -202,8 +202,6 @@
/* Fix up paca fields required for the boot cpu */
get_paca()->cpu_start = 1;
- get_paca()->stab_real = __pa((u64)&initial_stab);
- get_paca()->stab_addr = (u64)&initial_stab;
/* Probe the machine type */
probe_machine();
@@ -212,20 +210,8 @@
DBG("Found, Initializing memory management...\n");
- /*
- * Initialize the MMU Hash table and create the linear mapping
- * of memory. Has to be done before stab/slb initialization as
- * this is currently where the page size encoding is obtained
- */
- htab_initialize();
-
- /*
- * Initialize stab / SLB management except on iSeries
- */
- if (cpu_has_feature(CPU_FTR_SLB))
- slb_initialize();
- else if (!firmware_has_feature(FW_FEATURE_ISERIES))
- stab_initialize(get_paca()->stab_real);
+ /* Initialize the hash table or TLB handling */
+ early_init_mmu();
DBG(" <- early_setup()\n");
}
@@ -233,22 +219,11 @@
#ifdef CONFIG_SMP
void early_setup_secondary(void)
{
- struct paca_struct *lpaca = get_paca();
-
/* Mark interrupts enabled in PACA */
- lpaca->soft_enabled = 0;
+ get_paca()->soft_enabled = 0;
- /* Initialize hash table for that CPU */
- htab_initialize_secondary();
-
- /* Initialize STAB/SLB. We use a virtual address as it works
- * in real mode on pSeries and we want a virutal address on
- * iSeries anyway
- */
- if (cpu_has_feature(CPU_FTR_SLB))
- slb_initialize();
- else
- stab_initialize(lpaca->stab_addr);
+ /* Initialize the hash table or TLB handling */
+ early_init_mmu_secondary();
}
#endif /* CONFIG_SMP */
@@ -578,13 +553,6 @@
printk("[boot]%04x %s\n", src, msg);
}
-/* Print a termination message (print only -- does not stop the kernel) */
-void ppc64_terminate_msg(unsigned int src, const char *msg)
-{
- ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_TERM_MESSAGE|src, msg);
- printk("[terminate]%04x %s\n", src, msg);
-}
-
void cpu_die(void)
{
if (ppc_md.cpu_die)
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index a54405e..00b5078 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -26,12 +26,12 @@
* Allocate space for the signal frame
*/
void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
- size_t frame_size)
+ size_t frame_size, int is_32)
{
unsigned long oldsp, newsp;
/* Default to using normal stack */
- oldsp = regs->gpr[1];
+ oldsp = get_clean_sp(regs, is_32);
/* Check for alt stack */
if ((ka->sa.sa_flags & SA_ONSTACK) &&
diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h
index b427bf8..6c0ddfc 100644
--- a/arch/powerpc/kernel/signal.h
+++ b/arch/powerpc/kernel/signal.h
@@ -15,7 +15,7 @@
extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
- size_t frame_size);
+ size_t frame_size, int is_32);
extern void restore_sigmask(sigset_t *set);
extern int handle_signal32(unsigned long sig, struct k_sigaction *ka,
@@ -39,22 +39,12 @@
#ifdef CONFIG_PPC64
-static inline int is_32bit_task(void)
-{
- return test_thread_flag(TIF_32BIT);
-}
-
extern int handle_rt_signal64(int signr, struct k_sigaction *ka,
siginfo_t *info, sigset_t *set,
struct pt_regs *regs);
#else /* CONFIG_PPC64 */
-static inline int is_32bit_task(void)
-{
- return 1;
-}
-
static inline int handle_rt_signal64(int signr, struct k_sigaction *ka,
siginfo_t *info, sigset_t *set,
struct pt_regs *regs)
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index b13abf3..d670429 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -836,7 +836,7 @@
/* Set up Signal Frame */
/* Put a Real Time Context onto stack */
- rt_sf = get_sigframe(ka, regs, sizeof(*rt_sf));
+ rt_sf = get_sigframe(ka, regs, sizeof(*rt_sf), 1);
addr = rt_sf;
if (unlikely(rt_sf == NULL))
goto badframe;
@@ -1182,7 +1182,7 @@
unsigned long newsp = 0;
/* Set up Signal Frame */
- frame = get_sigframe(ka, regs, sizeof(*frame));
+ frame = get_sigframe(ka, regs, sizeof(*frame), 1);
if (unlikely(frame == NULL))
goto badframe;
sc = (struct sigcontext __user *) &frame->sctx;
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index e132891..2fe6fc6 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -402,7 +402,7 @@
unsigned long newsp = 0;
long err = 0;
- frame = get_sigframe(ka, regs, sizeof(*frame));
+ frame = get_sigframe(ka, regs, sizeof(*frame), 0);
if (unlikely(frame == NULL))
goto badframe;
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 4a2ee08..f41aec8 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -134,44 +134,23 @@
}
EXPORT_SYMBOL(ppc_enable_pmcs);
-#if defined(CONFIG_6xx) || defined(CONFIG_PPC64)
-/* XXX convert to rusty's on_one_cpu */
-static unsigned long run_on_cpu(unsigned long cpu,
- unsigned long (*func)(unsigned long),
- unsigned long arg)
-{
- cpumask_t old_affinity = current->cpus_allowed;
- unsigned long ret;
-
- /* should return -EINVAL to userspace */
- if (set_cpus_allowed(current, cpumask_of_cpu(cpu)))
- return 0;
-
- ret = func(arg);
-
- set_cpus_allowed(current, old_affinity);
-
- return ret;
-}
-#endif
-
#define SYSFS_PMCSETUP(NAME, ADDRESS) \
-static unsigned long read_##NAME(unsigned long junk) \
+static void read_##NAME(void *val) \
{ \
- return mfspr(ADDRESS); \
+ *(unsigned long *)val = mfspr(ADDRESS); \
} \
-static unsigned long write_##NAME(unsigned long val) \
+static void write_##NAME(void *val) \
{ \
ppc_enable_pmcs(); \
- mtspr(ADDRESS, val); \
- return 0; \
+ mtspr(ADDRESS, *(unsigned long *)val); \
} \
static ssize_t show_##NAME(struct sys_device *dev, \
struct sysdev_attribute *attr, \
char *buf) \
{ \
struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
- unsigned long val = run_on_cpu(cpu->sysdev.id, read_##NAME, 0); \
+ unsigned long val; \
+ smp_call_function_single(cpu->sysdev.id, read_##NAME, &val, 1); \
return sprintf(buf, "%lx\n", val); \
} \
static ssize_t __used \
@@ -183,7 +162,7 @@
int ret = sscanf(buf, "%lx", &val); \
if (ret != 1) \
return -EINVAL; \
- run_on_cpu(cpu->sysdev.id, write_##NAME, val); \
+ smp_call_function_single(cpu->sysdev.id, write_##NAME, &val, 1); \
return count; \
}
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 5457e95..678fbff 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -52,6 +52,10 @@
#include <asm/processor.h>
#endif
#include <asm/kexec.h>
+#include <asm/ppc-opcode.h>
+#ifdef CONFIG_FSL_BOOKE
+#include <asm/dbell.h>
+#endif
#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
int (*__debugger)(struct pt_regs *regs);
@@ -637,29 +641,6 @@
* bits is faster and easier.
*
*/
-#define INST_MFSPR_PVR 0x7c1f42a6
-#define INST_MFSPR_PVR_MASK 0xfc1fffff
-
-#define INST_DCBA 0x7c0005ec
-#define INST_DCBA_MASK 0xfc0007fe
-
-#define INST_MCRXR 0x7c000400
-#define INST_MCRXR_MASK 0xfc0007fe
-
-#define INST_STRING 0x7c00042a
-#define INST_STRING_MASK 0xfc0007fe
-#define INST_STRING_GEN_MASK 0xfc00067e
-#define INST_LSWI 0x7c0004aa
-#define INST_LSWX 0x7c00042a
-#define INST_STSWI 0x7c0005aa
-#define INST_STSWX 0x7c00052a
-
-#define INST_POPCNTB 0x7c0000f4
-#define INST_POPCNTB_MASK 0xfc0007fe
-
-#define INST_ISEL 0x7c00001e
-#define INST_ISEL_MASK 0xfc00003e
-
static int emulate_string_inst(struct pt_regs *regs, u32 instword)
{
u8 rT = (instword >> 21) & 0x1f;
@@ -670,20 +651,20 @@
int pos = 0;
/* Early out if we are an invalid form of lswx */
- if ((instword & INST_STRING_MASK) == INST_LSWX)
+ if ((instword & PPC_INST_STRING_MASK) == PPC_INST_LSWX)
if ((rT == rA) || (rT == NB_RB))
return -EINVAL;
EA = (rA == 0) ? 0 : regs->gpr[rA];
- switch (instword & INST_STRING_MASK) {
- case INST_LSWX:
- case INST_STSWX:
+ switch (instword & PPC_INST_STRING_MASK) {
+ case PPC_INST_LSWX:
+ case PPC_INST_STSWX:
EA += NB_RB;
num_bytes = regs->xer & 0x7f;
break;
- case INST_LSWI:
- case INST_STSWI:
+ case PPC_INST_LSWI:
+ case PPC_INST_STSWI:
num_bytes = (NB_RB == 0) ? 32 : NB_RB;
break;
default:
@@ -695,9 +676,9 @@
u8 val;
u32 shift = 8 * (3 - (pos & 0x3));
- switch ((instword & INST_STRING_MASK)) {
- case INST_LSWX:
- case INST_LSWI:
+ switch ((instword & PPC_INST_STRING_MASK)) {
+ case PPC_INST_LSWX:
+ case PPC_INST_LSWI:
if (get_user(val, (u8 __user *)EA))
return -EFAULT;
/* first time updating this reg,
@@ -706,8 +687,8 @@
regs->gpr[rT] = 0;
regs->gpr[rT] |= val << shift;
break;
- case INST_STSWI:
- case INST_STSWX:
+ case PPC_INST_STSWI:
+ case PPC_INST_STSWX:
val = regs->gpr[rT] >> shift;
if (put_user(val, (u8 __user *)EA))
return -EFAULT;
@@ -775,18 +756,18 @@
return -EFAULT;
/* Emulate the mfspr rD, PVR. */
- if ((instword & INST_MFSPR_PVR_MASK) == INST_MFSPR_PVR) {
+ if ((instword & PPC_INST_MFSPR_PVR_MASK) == PPC_INST_MFSPR_PVR) {
rd = (instword >> 21) & 0x1f;
regs->gpr[rd] = mfspr(SPRN_PVR);
return 0;
}
/* Emulating the dcba insn is just a no-op. */
- if ((instword & INST_DCBA_MASK) == INST_DCBA)
+ if ((instword & PPC_INST_DCBA_MASK) == PPC_INST_DCBA)
return 0;
/* Emulate the mcrxr insn. */
- if ((instword & INST_MCRXR_MASK) == INST_MCRXR) {
+ if ((instword & PPC_INST_MCRXR_MASK) == PPC_INST_MCRXR) {
int shift = (instword >> 21) & 0x1c;
unsigned long msk = 0xf0000000UL >> shift;
@@ -796,16 +777,16 @@
}
/* Emulate load/store string insn. */
- if ((instword & INST_STRING_GEN_MASK) == INST_STRING)
+ if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING)
return emulate_string_inst(regs, instword);
/* Emulate the popcntb (Population Count Bytes) instruction. */
- if ((instword & INST_POPCNTB_MASK) == INST_POPCNTB) {
+ if ((instword & PPC_INST_POPCNTB_MASK) == PPC_INST_POPCNTB) {
return emulate_popcntb_inst(regs, instword);
}
/* Emulate isel (Integer Select) instruction */
- if ((instword & INST_ISEL_MASK) == INST_ISEL) {
+ if ((instword & PPC_INST_ISEL_MASK) == PPC_INST_ISEL) {
return emulate_isel(regs, instword);
}
@@ -1144,6 +1125,24 @@
#endif /* CONFIG_VSX */
#ifdef CONFIG_FSL_BOOKE
+
+void doorbell_exception(struct pt_regs *regs)
+{
+#ifdef CONFIG_SMP
+ int cpu = smp_processor_id();
+ int msg;
+
+ if (num_online_cpus() < 2)
+ return;
+
+ for (msg = 0; msg < 4; msg++)
+ if (test_and_clear_bit(msg, &dbell_smp_message[cpu]))
+ smp_message_recv(msg);
+#else
+ printk(KERN_WARNING "Received doorbell on non-smp system\n");
+#endif
+}
+
void CacheLockingException(struct pt_regs *regs, unsigned long address,
unsigned long error_code)
{
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index 7d6c9bb..fc9af47 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -18,6 +18,7 @@
#include <asm/udbg.h>
void (*udbg_putc)(char c);
+void (*udbg_flush)(void);
int (*udbg_getc)(void);
int (*udbg_getc_poll)(void);
@@ -76,6 +77,9 @@
while ((c = *s++) != '\0')
udbg_putc(c);
}
+
+ if (udbg_flush)
+ udbg_flush();
}
#if 0
else {
@@ -98,6 +102,9 @@
}
}
+ if (udbg_flush)
+ udbg_flush();
+
return n - remain;
}
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 7b7da8c..0362a89 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -48,14 +48,21 @@
static struct NS16550 __iomem *udbg_comport;
-static void udbg_550_putc(char c)
+static void udbg_550_flush(void)
{
if (udbg_comport) {
while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0)
/* wait for idle */;
- out_8(&udbg_comport->thr, c);
+ }
+}
+
+static void udbg_550_putc(char c)
+{
+ if (udbg_comport) {
if (c == '\n')
udbg_550_putc('\r');
+ udbg_550_flush();
+ out_8(&udbg_comport->thr, c);
}
}
@@ -108,6 +115,7 @@
/* Clear & enable FIFOs */
out_8(&udbg_comport->fcr ,0x07);
udbg_putc = udbg_550_putc;
+ udbg_flush = udbg_550_flush;
udbg_getc = udbg_550_getc;
udbg_getc_poll = udbg_550_getc_poll;
}
@@ -149,14 +157,21 @@
}
#ifdef CONFIG_PPC_MAPLE
-void udbg_maple_real_putc(char c)
+void udbg_maple_real_flush(void)
{
if (udbg_comport) {
while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
/* wait for idle */;
- real_writeb(c, &udbg_comport->thr); eieio();
+ }
+}
+
+void udbg_maple_real_putc(char c)
+{
+ if (udbg_comport) {
if (c == '\n')
udbg_maple_real_putc('\r');
+ udbg_maple_real_flush();
+ real_writeb(c, &udbg_comport->thr); eieio();
}
}
@@ -165,20 +180,28 @@
udbg_comport = (struct NS16550 __iomem *)0xf40003f8;
udbg_putc = udbg_maple_real_putc;
+ udbg_flush = udbg_maple_real_flush;
udbg_getc = NULL;
udbg_getc_poll = NULL;
}
#endif /* CONFIG_PPC_MAPLE */
#ifdef CONFIG_PPC_PASEMI
-void udbg_pas_real_putc(char c)
+void udbg_pas_real_flush(void)
{
if (udbg_comport) {
while ((real_205_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
/* wait for idle */;
- real_205_writeb(c, &udbg_comport->thr); eieio();
+ }
+}
+
+void udbg_pas_real_putc(char c)
+{
+ if (udbg_comport) {
if (c == '\n')
udbg_pas_real_putc('\r');
+ udbg_pas_real_flush();
+ real_205_writeb(c, &udbg_comport->thr); eieio();
}
}
@@ -187,6 +210,7 @@
udbg_comport = (struct NS16550 __iomem *)0xfcff03f8UL;
udbg_putc = udbg_pas_real_putc;
+ udbg_flush = udbg_pas_real_flush;
udbg_getc = NULL;
udbg_getc_poll = NULL;
}
@@ -195,14 +219,21 @@
#ifdef CONFIG_PPC_EARLY_DEBUG_44x
#include <platforms/44x/44x.h>
-static void udbg_44x_as1_putc(char c)
+static int udbg_44x_as1_flush(void)
{
if (udbg_comport) {
while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
/* wait for idle */;
- as1_writeb(c, &udbg_comport->thr); eieio();
+ }
+}
+
+static void udbg_44x_as1_putc(char c)
+{
+ if (udbg_comport) {
if (c == '\n')
udbg_44x_as1_putc('\r');
+ udbg_44x_as1_flush();
+ as1_writeb(c, &udbg_comport->thr); eieio();
}
}
@@ -222,19 +253,27 @@
(struct NS16550 __iomem *)PPC44x_EARLY_DEBUG_VIRTADDR;
udbg_putc = udbg_44x_as1_putc;
+ udbg_flush = udbg_44x_as1_flush;
udbg_getc = udbg_44x_as1_getc;
}
#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
#ifdef CONFIG_PPC_EARLY_DEBUG_40x
-static void udbg_40x_real_putc(char c)
+static void udbg_40x_real_flush(void)
{
if (udbg_comport) {
while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
/* wait for idle */;
- real_writeb(c, &udbg_comport->thr); eieio();
+ }
+}
+
+static void udbg_40x_real_putc(char c)
+{
+ if (udbg_comport) {
if (c == '\n')
udbg_40x_real_putc('\r');
+ udbg_40x_real_flush();
+ real_writeb(c, &udbg_comport->thr); eieio();
}
}
@@ -254,6 +293,7 @@
CONFIG_PPC_EARLY_DEBUG_40x_PHYSADDR;
udbg_putc = udbg_40x_real_putc;
+ udbg_flush = udbg_40x_real_flush;
udbg_getc = udbg_40x_real_getc;
udbg_getc_poll = NULL;
}
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 67f07f4..b9ef164 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -58,6 +58,7 @@
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
+ IRQENTRY_TEXT
#ifdef CONFIG_PPC32
*(.got1)
diff --git a/arch/powerpc/lib/dma-noncoherent.c b/arch/powerpc/lib/dma-noncoherent.c
index b7dc4c1..005a28d 100644
--- a/arch/powerpc/lib/dma-noncoherent.c
+++ b/arch/powerpc/lib/dma-noncoherent.c
@@ -29,121 +29,11 @@
#include <linux/types.h>
#include <linux/highmem.h>
#include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
#include <asm/tlbflush.h>
/*
- * This address range defaults to a value that is safe for all
- * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It
- * can be further configured for specific applications under
- * the "Advanced Setup" menu. -Matt
- */
-#define CONSISTENT_BASE (CONFIG_CONSISTENT_START)
-#define CONSISTENT_END (CONFIG_CONSISTENT_START + CONFIG_CONSISTENT_SIZE)
-#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-
-/*
- * This is the page table (2MB) covering uncached, DMA consistent allocations
- */
-static pte_t *consistent_pte;
-static DEFINE_SPINLOCK(consistent_lock);
-
-/*
- * VM region handling support.
- *
- * This should become something generic, handling VM region allocations for
- * vmalloc and similar (ioremap, module space, etc).
- *
- * I envisage vmalloc()'s supporting vm_struct becoming:
- *
- * struct vm_struct {
- * struct vm_region region;
- * unsigned long flags;
- * struct page **pages;
- * unsigned int nr_pages;
- * unsigned long phys_addr;
- * };
- *
- * get_vm_area() would then call vm_region_alloc with an appropriate
- * struct vm_region head (eg):
- *
- * struct vm_region vmalloc_head = {
- * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list),
- * .vm_start = VMALLOC_START,
- * .vm_end = VMALLOC_END,
- * };
- *
- * However, vmalloc_head.vm_start is variable (typically, it is dependent on
- * the amount of RAM found at boot time.) I would imagine that get_vm_area()
- * would have to initialise this each time prior to calling vm_region_alloc().
- */
-struct ppc_vm_region {
- struct list_head vm_list;
- unsigned long vm_start;
- unsigned long vm_end;
-};
-
-static struct ppc_vm_region consistent_head = {
- .vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
- .vm_start = CONSISTENT_BASE,
- .vm_end = CONSISTENT_END,
-};
-
-static struct ppc_vm_region *
-ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp)
-{
- unsigned long addr = head->vm_start, end = head->vm_end - size;
- unsigned long flags;
- struct ppc_vm_region *c, *new;
-
- new = kmalloc(sizeof(struct ppc_vm_region), gfp);
- if (!new)
- goto out;
-
- spin_lock_irqsave(&consistent_lock, flags);
-
- list_for_each_entry(c, &head->vm_list, vm_list) {
- if ((addr + size) < addr)
- goto nospc;
- if ((addr + size) <= c->vm_start)
- goto found;
- addr = c->vm_end;
- if (addr > end)
- goto nospc;
- }
-
- found:
- /*
- * Insert this entry _before_ the one we found.
- */
- list_add_tail(&new->vm_list, &c->vm_list);
- new->vm_start = addr;
- new->vm_end = addr + size;
-
- spin_unlock_irqrestore(&consistent_lock, flags);
- return new;
-
- nospc:
- spin_unlock_irqrestore(&consistent_lock, flags);
- kfree(new);
- out:
- return NULL;
-}
-
-static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr)
-{
- struct ppc_vm_region *c;
-
- list_for_each_entry(c, &head->vm_list, vm_list) {
- if (c->vm_start == addr)
- goto out;
- }
- c = NULL;
- out:
- return c;
-}
-
-/*
* Allocate DMA-coherent memory space and return both the kernel remapped
* virtual and bus address for that space.
*/
@@ -151,21 +41,21 @@
__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp)
{
struct page *page;
- struct ppc_vm_region *c;
unsigned long order;
+ int i;
+ unsigned int nr_pages = PAGE_ALIGN(size)>>PAGE_SHIFT;
+ unsigned int array_size = nr_pages * sizeof(struct page *);
+ struct page **pages;
+ struct page *end;
u64 mask = 0x00ffffff, limit; /* ISA default */
+ struct vm_struct *area;
- if (!consistent_pte) {
- printk(KERN_ERR "%s: not initialised\n", __func__);
- dump_stack();
- return NULL;
- }
-
+ BUG_ON(!mem_init_done);
size = PAGE_ALIGN(size);
limit = (mask + 1) & ~mask;
- if ((limit && size >= limit) || size >= (CONSISTENT_END - CONSISTENT_BASE)) {
- printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n",
- size, mask);
+ if (limit && size >= limit) {
+ printk(KERN_WARNING "coherent allocation too big (requested "
+ "%#x mask %#Lx)\n", size, mask);
return NULL;
}
@@ -178,6 +68,8 @@
if (!page)
goto no_page;
+ end = page + (1 << order);
+
/*
* Invalidate any data that might be lurking in the
* kernel direct-mapped region for device DMA.
@@ -188,48 +80,59 @@
flush_dcache_range(kaddr, kaddr + size);
}
+ split_page(page, order);
+
/*
- * Allocate a virtual address in the consistent mapping region.
+ * Set the "dma handle"
*/
- c = ppc_vm_region_alloc(&consistent_head, size,
- gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
- if (c) {
- unsigned long vaddr = c->vm_start;
- pte_t *pte = consistent_pte + CONSISTENT_OFFSET(vaddr);
- struct page *end = page + (1 << order);
+ *handle = page_to_phys(page);
- split_page(page, order);
+ area = get_vm_area_caller(size, VM_IOREMAP,
+ __builtin_return_address(1));
+ if (!area)
+ goto out_free_pages;
- /*
- * Set the "dma handle"
- */
- *handle = page_to_phys(page);
+ if (array_size > PAGE_SIZE) {
+ pages = vmalloc(array_size);
+ area->flags |= VM_VPAGES;
+ } else {
+ pages = kmalloc(array_size, GFP_KERNEL);
+ }
+ if (!pages)
+ goto out_free_area;
- do {
- BUG_ON(!pte_none(*pte));
+ area->pages = pages;
+ area->nr_pages = nr_pages;
- SetPageReserved(page);
- set_pte_at(&init_mm, vaddr,
- pte, mk_pte(page, pgprot_noncached(PAGE_KERNEL)));
- page++;
- pte++;
- vaddr += PAGE_SIZE;
- } while (size -= PAGE_SIZE);
+ for (i = 0; i < nr_pages; i++)
+ pages[i] = page + i;
- /*
- * Free the otherwise unused pages.
- */
- while (page < end) {
- __free_page(page);
- page++;
- }
+ if (map_vm_area(area, pgprot_noncached(PAGE_KERNEL), &pages))
+ goto out_unmap;
- return (void *)c->vm_start;
+ /*
+ * Free the otherwise unused pages.
+ */
+ page += nr_pages;
+ while (page < end) {
+ __free_page(page);
+ page++;
}
+ return area->addr;
+out_unmap:
+ vunmap(area->addr);
+ if (array_size > PAGE_SIZE)
+ vfree(pages);
+ else
+ kfree(pages);
+ goto out_free_pages;
+out_free_area:
+ free_vm_area(area);
+out_free_pages:
if (page)
__free_pages(page, order);
- no_page:
+no_page:
return NULL;
}
EXPORT_SYMBOL(__dma_alloc_coherent);
@@ -239,104 +142,12 @@
*/
void __dma_free_coherent(size_t size, void *vaddr)
{
- struct ppc_vm_region *c;
- unsigned long flags, addr;
- pte_t *ptep;
+ vfree(vaddr);
- size = PAGE_ALIGN(size);
-
- spin_lock_irqsave(&consistent_lock, flags);
-
- c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr);
- if (!c)
- goto no_area;
-
- if ((c->vm_end - c->vm_start) != size) {
- printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
- __func__, c->vm_end - c->vm_start, size);
- dump_stack();
- size = c->vm_end - c->vm_start;
- }
-
- ptep = consistent_pte + CONSISTENT_OFFSET(c->vm_start);
- addr = c->vm_start;
- do {
- pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
- unsigned long pfn;
-
- ptep++;
- addr += PAGE_SIZE;
-
- if (!pte_none(pte) && pte_present(pte)) {
- pfn = pte_pfn(pte);
-
- if (pfn_valid(pfn)) {
- struct page *page = pfn_to_page(pfn);
- ClearPageReserved(page);
-
- __free_page(page);
- continue;
- }
- }
-
- printk(KERN_CRIT "%s: bad page in kernel page table\n",
- __func__);
- } while (size -= PAGE_SIZE);
-
- flush_tlb_kernel_range(c->vm_start, c->vm_end);
-
- list_del(&c->vm_list);
-
- spin_unlock_irqrestore(&consistent_lock, flags);
-
- kfree(c);
- return;
-
- no_area:
- spin_unlock_irqrestore(&consistent_lock, flags);
- printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
- __func__, vaddr);
- dump_stack();
}
EXPORT_SYMBOL(__dma_free_coherent);
/*
- * Initialise the consistent memory allocation.
- */
-static int __init dma_alloc_init(void)
-{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
- int ret = 0;
-
- do {
- pgd = pgd_offset(&init_mm, CONSISTENT_BASE);
- pud = pud_alloc(&init_mm, pgd, CONSISTENT_BASE);
- pmd = pmd_alloc(&init_mm, pud, CONSISTENT_BASE);
- if (!pmd) {
- printk(KERN_ERR "%s: no pmd tables\n", __func__);
- ret = -ENOMEM;
- break;
- }
-
- pte = pte_alloc_kernel(pmd, CONSISTENT_BASE);
- if (!pte) {
- printk(KERN_ERR "%s: no pte tables\n", __func__);
- ret = -ENOMEM;
- break;
- }
-
- consistent_pte = pte;
- } while (0);
-
- return ret;
-}
-
-core_initcall(dma_alloc_init);
-
-/*
* make an area consistent.
*/
void __dma_sync(void *vaddr, size_t size, int direction)
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
index 8c5a03b..7e8865b 100644
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -85,7 +85,7 @@
}
for (; dest < end; dest++)
- patch_instruction(dest, PPC_NOP_INSTR);
+ patch_instruction(dest, PPC_INST_NOP);
return 0;
}
@@ -122,7 +122,7 @@
for (; start < end; start++) {
dest = (void *)start + *start;
- patch_instruction(dest, PPC_LWSYNC_INSTR);
+ patch_instruction(dest, PPC_INST_LWSYNC);
}
}
diff --git a/arch/powerpc/math-emu/Makefile b/arch/powerpc/math-emu/Makefile
index f9e506a..0c16ab9 100644
--- a/arch/powerpc/math-emu/Makefile
+++ b/arch/powerpc/math-emu/Makefile
@@ -1,6 +1,4 @@
-obj-y := math.o fmr.o lfd.o stfd.o
-
obj-$(CONFIG_MATH_EMULATION) += fabs.o fadd.o fadds.o fcmpo.o fcmpu.o \
fctiw.o fctiwz.o fdiv.o fdivs.o \
fmadd.o fmadds.o fmsub.o fmsubs.o \
@@ -9,7 +7,8 @@
fres.o frsp.o frsqrte.o fsel.o lfs.o \
fsqrt.o fsqrts.o fsub.o fsubs.o \
mcrfs.o mffs.o mtfsb0.o mtfsb1.o \
- mtfsf.o mtfsfi.o stfiwx.o stfs.o
+ mtfsf.o mtfsfi.o stfiwx.o stfs.o \
+ math.o fmr.o lfd.o stfd.o
obj-$(CONFIG_SPE) += math_efp.o
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 953cc4a..17290bc 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -6,7 +6,7 @@
EXTRA_CFLAGS += -mno-minimal-toc
endif
-obj-y := fault.o mem.o pgtable.o \
+obj-y := fault.o mem.o pgtable.o gup.o \
init_$(CONFIG_WORD_SIZE).o \
pgtable_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \
@@ -14,7 +14,7 @@
hash-$(CONFIG_PPC_NATIVE) := hash_native_64.o
obj-$(CONFIG_PPC64) += hash_utils_64.o \
slb_low.o slb.o stab.o \
- gup.o mmap.o $(hash-y)
+ mmap_64.o $(hash-y)
obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o
obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \
tlb_hash$(CONFIG_WORD_SIZE).o \
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 91c7b86..7699394 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -253,45 +253,33 @@
#endif /* CONFIG_8xx */
if (is_exec) {
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
- /* protection fault */
+#ifdef CONFIG_PPC_STD_MMU
+ /* Protection fault on exec go straight to failure on
+ * Hash based MMUs as they either don't support per-page
+ * execute permission, or if they do, it's handled already
+ * at the hash level. This test would probably have to
+ * be removed if we change the way this works to make hash
+ * processors use the same I/D cache coherency mechanism
+ * as embedded.
+ */
if (error_code & DSISR_PROTFAULT)
goto bad_area;
+#endif /* CONFIG_PPC_STD_MMU */
+
/*
* Allow execution from readable areas if the MMU does not
* provide separate controls over reading and executing.
+ *
+ * Note: That code used to not be enabled for 4xx/BookE.
+ * It is now as I/D cache coherency for these is done at
+ * set_pte_at() time and I see no reason why the test
+ * below wouldn't be valid on those processors. This -may-
+ * break programs compiled with a really old ABI though.
*/
if (!(vma->vm_flags & VM_EXEC) &&
(cpu_has_feature(CPU_FTR_NOEXECUTE) ||
!(vma->vm_flags & (VM_READ | VM_WRITE))))
goto bad_area;
-#else
- pte_t *ptep;
- pmd_t *pmdp;
-
- /* Since 4xx/Book-E supports per-page execute permission,
- * we lazily flush dcache to icache. */
- ptep = NULL;
- if (get_pteptr(mm, address, &ptep, &pmdp)) {
- spinlock_t *ptl = pte_lockptr(mm, pmdp);
- spin_lock(ptl);
- if (pte_present(*ptep)) {
- struct page *page = pte_page(*ptep);
-
- if (!test_bit(PG_arch_1, &page->flags)) {
- flush_dcache_icache_page(page);
- set_bit(PG_arch_1, &page->flags);
- }
- pte_update(ptep, 0, _PAGE_HWEXEC |
- _PAGE_ACCESSED);
- local_flush_tlb_page(vma, address);
- pte_unmap_unlock(ptep, ptl);
- up_read(&mm->mmap_sem);
- return 0;
- }
- pte_unmap_unlock(ptep, ptl);
- }
-#endif
/* a write */
} else if (is_write) {
if (!(vma->vm_flags & VM_WRITE))
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index ea6e41e..bb3d659 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -56,10 +56,14 @@
extern void loadcam_entry(unsigned int index);
unsigned int tlbcam_index;
-static unsigned long __cam0, __cam1, __cam2;
+static unsigned long cam[CONFIG_LOWMEM_CAM_NUM];
#define NUM_TLBCAMS (16)
+#if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS)
+#error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS"
+#endif
+
struct tlbcam TLBCAM[NUM_TLBCAMS];
struct tlbcamrange {
@@ -107,7 +111,7 @@
unsigned int tsize, lz;
asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size));
- tsize = (21 - lz) / 2;
+ tsize = 21 - lz;
#ifdef CONFIG_SMP
if ((flags & _PAGE_NO_CACHE) == 0)
@@ -152,19 +156,19 @@
loadcam_entry(index);
}
-void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1,
- unsigned long cam2)
+unsigned long __init mmu_mapin_ram(void)
{
- settlbcam(0, PAGE_OFFSET, memstart_addr, cam0, _PAGE_KERNEL, 0);
- tlbcam_index++;
- if (cam1) {
+ unsigned long virt = PAGE_OFFSET;
+ phys_addr_t phys = memstart_addr;
+
+ while (cam[tlbcam_index] && tlbcam_index < ARRAY_SIZE(cam)) {
+ settlbcam(tlbcam_index, virt, phys, cam[tlbcam_index], PAGE_KERNEL_X, 0);
+ virt += cam[tlbcam_index];
+ phys += cam[tlbcam_index];
tlbcam_index++;
- settlbcam(1, PAGE_OFFSET+cam0, memstart_addr+cam0, cam1, _PAGE_KERNEL, 0);
}
- if (cam2) {
- tlbcam_index++;
- settlbcam(2, PAGE_OFFSET+cam0+cam1, memstart_addr+cam0+cam1, cam2, _PAGE_KERNEL, 0);
- }
+
+ return virt - PAGE_OFFSET;
}
/*
@@ -175,51 +179,46 @@
flush_instruction_cache();
}
-unsigned long __init mmu_mapin_ram(void)
-{
- cam_mapin_ram(__cam0, __cam1, __cam2);
-
- return __cam0 + __cam1 + __cam2;
-}
-
-
void __init
adjust_total_lowmem(void)
{
- phys_addr_t max_lowmem_size = __max_low_memory;
- phys_addr_t cam_max_size = 0x10000000;
phys_addr_t ram;
+ unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xff;
+ char buf[ARRAY_SIZE(cam) * 5 + 1], *p = buf;
+ int i;
+ unsigned long virt = PAGE_OFFSET & 0xffffffffUL;
+ unsigned long phys = memstart_addr & 0xffffffffUL;
- /* adjust CAM size to max_lowmem_size */
- if (max_lowmem_size < cam_max_size)
- cam_max_size = max_lowmem_size;
+ /* Convert (4^max) kB to (2^max) bytes */
+ max_cam = max_cam * 2 + 10;
- /* adjust lowmem size to max_lowmem_size */
- ram = min(max_lowmem_size, total_lowmem);
+ /* adjust lowmem size to __max_low_memory */
+ ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem);
/* Calculate CAM values */
- __cam0 = 1UL << 2 * (__ilog2(ram) / 2);
- if (__cam0 > cam_max_size)
- __cam0 = cam_max_size;
- ram -= __cam0;
- if (ram) {
- __cam1 = 1UL << 2 * (__ilog2(ram) / 2);
- if (__cam1 > cam_max_size)
- __cam1 = cam_max_size;
- ram -= __cam1;
- }
- if (ram) {
- __cam2 = 1UL << 2 * (__ilog2(ram) / 2);
- if (__cam2 > cam_max_size)
- __cam2 = cam_max_size;
- ram -= __cam2;
- }
+ __max_low_memory = 0;
+ for (i = 0; ram && i < ARRAY_SIZE(cam); i++) {
+ unsigned int camsize = __ilog2(ram) & ~1U;
+ unsigned int align = __ffs(virt | phys) & ~1U;
- printk(KERN_INFO "Memory CAM mapping: CAM0=%ldMb, CAM1=%ldMb,"
- " CAM2=%ldMb residual: %ldMb\n",
- __cam0 >> 20, __cam1 >> 20, __cam2 >> 20,
- (long int)((total_lowmem - __cam0 - __cam1 - __cam2)
- >> 20));
- __max_low_memory = __cam0 + __cam1 + __cam2;
+ if (camsize > align)
+ camsize = align;
+ if (camsize > max_cam)
+ camsize = max_cam;
+
+ cam[i] = 1UL << camsize;
+ ram -= cam[i];
+ __max_low_memory += cam[i];
+ virt += cam[i];
+ phys += cam[i];
+
+ p += sprintf(p, "%lu/", cam[i] >> 20);
+ }
+ for (; i < ARRAY_SIZE(cam); i++)
+ p += sprintf(p, "0/");
+ p[-1] = '\0';
+
+ pr_info("Memory CAM mapping: %s Mb, residual: %dMb\n", buf,
+ (unsigned int)((total_lowmem - __max_low_memory) >> 20));
__initial_memory_limit_addr = memstart_addr + __max_low_memory;
}
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index 28a114d..bc400c7 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -14,6 +14,8 @@
#include <linux/rwsem.h>
#include <asm/pgtable.h>
+#ifdef __HAVE_ARCH_PTE_SPECIAL
+
/*
* The performance critical leaf functions are made noinline otherwise gcc
* inlines everything into a single function which results in too much
@@ -151,8 +153,11 @@
unsigned long addr, len, end;
unsigned long next;
pgd_t *pgdp;
- int psize, nr = 0;
+ int nr = 0;
+#ifdef CONFIG_PPC64
unsigned int shift;
+ int psize;
+#endif
pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
@@ -205,8 +210,13 @@
*/
local_irq_disable();
+#ifdef CONFIG_PPC64
+ /* Those bits are related to hugetlbfs implementation and only exist
+ * on 64-bit for now
+ */
psize = get_slice_psize(mm, addr);
shift = mmu_psize_defs[psize].shift;
+#endif /* CONFIG_PPC64 */
#ifdef CONFIG_HUGETLB_PAGE
if (unlikely(mmu_huge_psizes[psize])) {
@@ -236,7 +246,9 @@
do {
pgd_t pgd = *pgdp;
+#ifdef CONFIG_PPC64
VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
+#endif
pr_debug(" %016lx: normal pgd %p\n", addr,
(void *)pgd_val(pgd));
next = pgd_addr_end(addr, end);
@@ -279,3 +291,5 @@
return ret;
}
}
+
+#endif /* __HAVE_ARCH_PTE_SPECIAL */
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 8d5b475..db556d2 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -516,7 +516,7 @@
static unsigned long __init htab_get_table_size(void)
{
- unsigned long mem_size, rnd_mem_size, pteg_count;
+ unsigned long mem_size, rnd_mem_size, pteg_count, psize;
/* If hash size isn't already provided by the platform, we try to
* retrieve it from the device-tree. If it's not there neither, we
@@ -534,7 +534,8 @@
rnd_mem_size <<= 1;
/* # pages / 2 */
- pteg_count = max(rnd_mem_size >> (12 + 1), 1UL << 11);
+ psize = mmu_psize_defs[mmu_virtual_psize].shift;
+ pteg_count = max(rnd_mem_size >> (psize + 1), 1UL << 11);
return pteg_count << 7;
}
@@ -589,7 +590,7 @@
make_bl(htab_call_hpte_updatepp, ppc_md.hpte_updatepp);
}
-void __init htab_initialize(void)
+static void __init htab_initialize(void)
{
unsigned long table;
unsigned long pteg_count;
@@ -731,11 +732,43 @@
#undef KB
#undef MB
-void htab_initialize_secondary(void)
+void __init early_init_mmu(void)
{
+ /* Setup initial STAB address in the PACA */
+ get_paca()->stab_real = __pa((u64)&initial_stab);
+ get_paca()->stab_addr = (u64)&initial_stab;
+
+ /* Initialize the MMU Hash table and create the linear mapping
+ * of memory. Has to be done before stab/slb initialization as
+ * this is currently where the page size encoding is obtained
+ */
+ htab_initialize();
+
+ /* Initialize stab / SLB management except on iSeries
+ */
+ if (cpu_has_feature(CPU_FTR_SLB))
+ slb_initialize();
+ else if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ stab_initialize(get_paca()->stab_real);
+}
+
+#ifdef CONFIG_SMP
+void __init early_init_mmu_secondary(void)
+{
+ /* Initialize hash table for that CPU */
if (!firmware_has_feature(FW_FEATURE_LPAR))
mtspr(SPRN_SDR1, _SDR1);
+
+ /* Initialize STAB/SLB. We use a virtual address as it works
+ * in real mode on pSeries and we want a virutal address on
+ * iSeries anyway
+ */
+ if (cpu_has_feature(CPU_FTR_SLB))
+ slb_initialize();
+ else
+ stab_initialize(get_paca()->stab_addr);
}
+#endif /* CONFIG_SMP */
/*
* Called by asm hashtable.S for doing lazy icache flush
@@ -858,7 +891,7 @@
unsigned long vsid;
struct mm_struct *mm;
pte_t *ptep;
- cpumask_t tmp;
+ const struct cpumask *tmp;
int rc, user_region = 0, local = 0;
int psize, ssize;
@@ -906,8 +939,8 @@
return 1;
/* Check CPU locality */
- tmp = cpumask_of_cpu(smp_processor_id());
- if (user_region && cpus_equal(mm->cpu_vm_mask, tmp))
+ tmp = cpumask_of(smp_processor_id());
+ if (user_region && cpumask_equal(mm_cpumask(mm), tmp))
local = 1;
#ifdef CONFIG_HUGETLB_PAGE
@@ -1023,7 +1056,6 @@
unsigned long vsid;
void *pgdir;
pte_t *ptep;
- cpumask_t mask;
unsigned long flags;
int local = 0;
int ssize;
@@ -1066,8 +1098,7 @@
local_irq_save(flags);
/* Is that local to this CPU ? */
- mask = cpumask_of_cpu(smp_processor_id());
- if (cpus_equal(mm->cpu_vm_mask, mask))
+ if (cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id())))
local = 1;
/* Hash it in */
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index f00f09a..f668fa9 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -472,40 +472,7 @@
{
#ifdef CONFIG_PPC_STD_MMU
unsigned long access = 0, trap;
-#endif
- unsigned long pfn = pte_pfn(pte);
- /* handle i-cache coherency */
- if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE) &&
- !cpu_has_feature(CPU_FTR_NOEXECUTE) &&
- pfn_valid(pfn)) {
- struct page *page = pfn_to_page(pfn);
-#ifdef CONFIG_8xx
- /* On 8xx, cache control instructions (particularly
- * "dcbst" from flush_dcache_icache) fault as write
- * operation if there is an unpopulated TLB entry
- * for the address in question. To workaround that,
- * we invalidate the TLB here, thus avoiding dcbst
- * misbehaviour.
- */
- _tlbil_va(address, 0 /* 8xx doesn't care about PID */);
-#endif
- /* The _PAGE_USER test should really be _PAGE_EXEC, but
- * older glibc versions execute some code from no-exec
- * pages, which for now we are supporting. If exec-only
- * pages are ever implemented, this will have to change.
- */
- if (!PageReserved(page) && (pte_val(pte) & _PAGE_USER)
- && !test_bit(PG_arch_1, &page->flags)) {
- if (vma->vm_mm == current->active_mm) {
- __flush_dcache_icache((void *) address);
- } else
- flush_dcache_icache_page(page);
- set_bit(PG_arch_1, &page->flags);
- }
- }
-
-#ifdef CONFIG_PPC_STD_MMU
/* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */
if (!pte_young(pte) || address >= TASK_SIZE)
return;
diff --git a/arch/powerpc/mm/mmap.c b/arch/powerpc/mm/mmap_64.c
similarity index 64%
rename from arch/powerpc/mm/mmap.c
rename to arch/powerpc/mm/mmap_64.c
index 86010fc..0d957a4 100644
--- a/arch/powerpc/mm/mmap.c
+++ b/arch/powerpc/mm/mmap_64.c
@@ -24,16 +24,57 @@
#include <linux/personality.h>
#include <linux/mm.h>
+#include <linux/random.h>
#include <linux/sched.h>
/*
* Top of mmap area (just below the process stack).
*
- * Leave an at least ~128 MB hole.
+ * Leave at least a ~128 MB hole on 32bit applications.
+ *
+ * On 64bit applications we randomise the stack by 1GB so we need to
+ * space our mmap start address by a further 1GB, otherwise there is a
+ * chance the mmap area will end up closer to the stack than our ulimit
+ * requires.
*/
-#define MIN_GAP (128*1024*1024)
+#define MIN_GAP32 (128*1024*1024)
+#define MIN_GAP64 ((128 + 1024)*1024*1024UL)
+#define MIN_GAP ((is_32bit_task()) ? MIN_GAP32 : MIN_GAP64)
#define MAX_GAP (TASK_SIZE/6*5)
+static inline int mmap_is_legacy(void)
+{
+ if (current->personality & ADDR_COMPAT_LAYOUT)
+ return 1;
+
+ if (current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY)
+ return 1;
+
+ return sysctl_legacy_va_layout;
+}
+
+/*
+ * Since get_random_int() returns the same value within a 1 jiffy window,
+ * we will almost always get the same randomisation for the stack and mmap
+ * region. This will mean the relative distance between stack and mmap will
+ * be the same.
+ *
+ * To avoid this we can shift the randomness by 1 bit.
+ */
+static unsigned long mmap_rnd(void)
+{
+ unsigned long rnd = 0;
+
+ if (current->flags & PF_RANDOMIZE) {
+ /* 8MB for 32bit, 1GB for 64bit */
+ if (is_32bit_task())
+ rnd = (long)(get_random_int() % (1<<(22-PAGE_SHIFT)));
+ else
+ rnd = (long)(get_random_int() % (1<<(29-PAGE_SHIFT)));
+ }
+ return (rnd << PAGE_SHIFT) * 2;
+}
+
static inline unsigned long mmap_base(void)
{
unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
@@ -43,24 +84,7 @@
else if (gap > MAX_GAP)
gap = MAX_GAP;
- return TASK_SIZE - (gap & PAGE_MASK);
-}
-
-static inline int mmap_is_legacy(void)
-{
- /*
- * Force standard allocation for 64 bit programs.
- */
- if (!test_thread_flag(TIF_32BIT))
- return 1;
-
- if (current->personality & ADDR_COMPAT_LAYOUT)
- return 1;
-
- if (current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY)
- return 1;
-
- return sysctl_legacy_va_layout;
+ return PAGE_ALIGN(TASK_SIZE - gap - mmap_rnd());
}
/*
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 52a0cfc..a70e311 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -97,7 +97,7 @@
mm->context.id = MMU_NO_CONTEXT;
/* Mark it stale on all CPUs that used this mm */
- for_each_cpu_mask_nr(cpu, mm->cpu_vm_mask)
+ for_each_cpu(cpu, mm_cpumask(mm))
__set_bit(id, stale_map[cpu]);
return id;
}
@@ -380,7 +380,7 @@
#endif
printk(KERN_INFO
- "MMU: Allocated %d bytes of context maps for %d contexts\n",
+ "MMU: Allocated %zu bytes of context maps for %d contexts\n",
2 * CTX_MAP_SIZE + (sizeof(void *) * (last_context + 1)),
last_context - first_context + 1);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 5ac08b8..9047145 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -158,35 +158,6 @@
}
#endif /* CONFIG_HOTPLUG_CPU */
-static struct device_node * __cpuinit find_cpu_node(unsigned int cpu)
-{
- unsigned int hw_cpuid = get_hard_smp_processor_id(cpu);
- struct device_node *cpu_node = NULL;
- const unsigned int *interrupt_server, *reg;
- int len;
-
- while ((cpu_node = of_find_node_by_type(cpu_node, "cpu")) != NULL) {
- /* Try interrupt server first */
- interrupt_server = of_get_property(cpu_node,
- "ibm,ppc-interrupt-server#s", &len);
-
- len = len / sizeof(u32);
-
- if (interrupt_server && (len > 0)) {
- while (len--) {
- if (interrupt_server[len] == hw_cpuid)
- return cpu_node;
- }
- } else {
- reg = of_get_property(cpu_node, "reg", &len);
- if (reg && (len > 0) && (reg[0] == hw_cpuid))
- return cpu_node;
- }
- }
-
- return NULL;
-}
-
/* must hold reference to node during call */
static const int *of_get_associativity(struct device_node *dev)
{
@@ -290,7 +261,7 @@
ref_points = of_get_property(rtas_root,
"ibm,associativity-reference-points", &len);
- if ((len >= 1) && ref_points) {
+ if ((len >= 2 * sizeof(unsigned int)) && ref_points) {
depth = ref_points[1];
} else {
dbg("NUMA: ibm,associativity-reference-points not found.\n");
@@ -470,7 +441,7 @@
static int __cpuinit numa_setup_cpu(unsigned long lcpu)
{
int nid = 0;
- struct device_node *cpu = find_cpu_node(lcpu);
+ struct device_node *cpu = of_get_cpu_node(lcpu, NULL);
if (!cpu) {
WARN_ON(1);
@@ -652,7 +623,7 @@
for_each_present_cpu(i) {
int nid;
- cpu = find_cpu_node(i);
+ cpu = of_get_cpu_node(i, NULL);
BUG_ON(!cpu);
nid = of_node_to_nid_single(cpu);
of_node_put(cpu);
@@ -1041,57 +1012,32 @@
#ifdef CONFIG_MEMORY_HOTPLUG
/*
- * Validate the node associated with the memory section we are
- * trying to add.
- */
-int valid_hot_add_scn(int *nid, unsigned long start, u32 lmb_size,
- unsigned long scn_addr)
-{
- nodemask_t nodes;
-
- if (*nid < 0 || !node_online(*nid))
- *nid = any_online_node(NODE_MASK_ALL);
-
- if ((scn_addr >= start) && (scn_addr < (start + lmb_size))) {
- nodes_setall(nodes);
- while (NODE_DATA(*nid)->node_spanned_pages == 0) {
- node_clear(*nid, nodes);
- *nid = any_online_node(nodes);
- }
-
- return 1;
- }
-
- return 0;
-}
-
-/*
- * Find the node associated with a hot added memory section represented
- * by the ibm,dynamic-reconfiguration-memory node.
+ * Find the node associated with a hot added memory section for
+ * memory represented in the device tree by the property
+ * ibm,dynamic-reconfiguration-memory/ibm,dynamic-memory.
*/
static int hot_add_drconf_scn_to_nid(struct device_node *memory,
unsigned long scn_addr)
{
const u32 *dm;
- unsigned int n, rc;
+ unsigned int drconf_cell_cnt, rc;
unsigned long lmb_size;
- int default_nid = any_online_node(NODE_MASK_ALL);
- int nid;
struct assoc_arrays aa;
+ int nid = -1;
- n = of_get_drconf_memory(memory, &dm);
- if (!n)
- return default_nid;;
+ drconf_cell_cnt = of_get_drconf_memory(memory, &dm);
+ if (!drconf_cell_cnt)
+ return -1;
lmb_size = of_get_lmb_size(memory);
if (!lmb_size)
- return default_nid;
+ return -1;
rc = of_get_assoc_arrays(memory, &aa);
if (rc)
- return default_nid;
+ return -1;
- for (; n != 0; --n) {
+ for (; drconf_cell_cnt != 0; --drconf_cell_cnt) {
struct of_drconf_cell drmem;
read_drconf_cell(&drmem, &dm);
@@ -1102,36 +1048,26 @@
|| !(drmem.flags & DRCONF_MEM_ASSIGNED))
continue;
- nid = of_drconf_to_nid_single(&drmem, &aa);
+ if ((scn_addr < drmem.base_addr)
+ || (scn_addr >= (drmem.base_addr + lmb_size)))
+ continue;
- if (valid_hot_add_scn(&nid, drmem.base_addr, lmb_size,
- scn_addr))
- return nid;
+ nid = of_drconf_to_nid_single(&drmem, &aa);
+ break;
}
- BUG(); /* section address should be found above */
- return 0;
+ return nid;
}
/*
- * Find the node associated with a hot added memory section. Section
- * corresponds to a SPARSEMEM section, not an LMB. It is assumed that
- * sections are fully contained within a single LMB.
+ * Find the node associated with a hot added memory section for memory
+ * represented in the device tree as a node (i.e. memory@XXXX) for
+ * each lmb.
*/
-int hot_add_scn_to_nid(unsigned long scn_addr)
+int hot_add_node_scn_to_nid(unsigned long scn_addr)
{
struct device_node *memory = NULL;
- int nid;
-
- if (!numa_enabled || (min_common_depth < 0))
- return any_online_node(NODE_MASK_ALL);
-
- memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
- if (memory) {
- nid = hot_add_drconf_scn_to_nid(memory, scn_addr);
- of_node_put(memory);
- return nid;
- }
+ int nid = -1;
while ((memory = of_find_node_by_type(memory, "memory")) != NULL) {
unsigned long start, size;
@@ -1145,20 +1081,62 @@
/* ranges in cell */
ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells);
-ha_new_range:
- start = read_n_cells(n_mem_addr_cells, &memcell_buf);
- size = read_n_cells(n_mem_size_cells, &memcell_buf);
- nid = of_node_to_nid_single(memory);
- if (valid_hot_add_scn(&nid, start, size, scn_addr)) {
- of_node_put(memory);
- return nid;
+ while (ranges--) {
+ start = read_n_cells(n_mem_addr_cells, &memcell_buf);
+ size = read_n_cells(n_mem_size_cells, &memcell_buf);
+
+ if ((scn_addr < start) || (scn_addr >= (start + size)))
+ continue;
+
+ nid = of_node_to_nid_single(memory);
+ break;
}
- if (--ranges) /* process all ranges in cell */
- goto ha_new_range;
+ of_node_put(memory);
+ if (nid >= 0)
+ break;
}
- BUG(); /* section address should be found above */
- return 0;
+
+ return nid;
}
+
+/*
+ * Find the node associated with a hot added memory section. Section
+ * corresponds to a SPARSEMEM section, not an LMB. It is assumed that
+ * sections are fully contained within a single LMB.
+ */
+int hot_add_scn_to_nid(unsigned long scn_addr)
+{
+ struct device_node *memory = NULL;
+ int nid, found = 0;
+
+ if (!numa_enabled || (min_common_depth < 0))
+ return any_online_node(NODE_MASK_ALL);
+
+ memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
+ if (memory) {
+ nid = hot_add_drconf_scn_to_nid(memory, scn_addr);
+ of_node_put(memory);
+ } else {
+ nid = hot_add_node_scn_to_nid(scn_addr);
+ }
+
+ if (nid < 0 || !node_online(nid))
+ nid = any_online_node(NODE_MASK_ALL);
+
+ if (NODE_DATA(nid)->node_spanned_pages)
+ return nid;
+
+ for_each_online_node(nid) {
+ if (NODE_DATA(nid)->node_spanned_pages) {
+ found = 1;
+ break;
+ }
+ }
+
+ BUG_ON(!found);
+ return nid;
+}
+
#endif /* CONFIG_MEMORY_HOTPLUG */
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index 6d94116..f5c6fd4 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -1,5 +1,6 @@
/*
* This file contains common routines for dealing with free of page tables
+ * Along with common page table handling code
*
* Derived from arch/powerpc/mm/tlb_64.c:
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
@@ -81,11 +82,10 @@
void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf)
{
/* This is safe since tlb_gather_mmu has disabled preemption */
- cpumask_t local_cpumask = cpumask_of_cpu(smp_processor_id());
struct pte_freelist_batch **batchp = &__get_cpu_var(pte_freelist_cur);
if (atomic_read(&tlb->mm->mm_users) < 2 ||
- cpus_equal(tlb->mm->cpu_vm_mask, local_cpumask)) {
+ cpumask_equal(mm_cpumask(tlb->mm), cpumask_of(smp_processor_id()))){
pgtable_free(pgf);
return;
}
@@ -115,3 +115,133 @@
pte_free_submit(*batchp);
*batchp = NULL;
}
+
+/*
+ * Handle i/d cache flushing, called from set_pte_at() or ptep_set_access_flags()
+ */
+static pte_t do_dcache_icache_coherency(pte_t pte)
+{
+ unsigned long pfn = pte_pfn(pte);
+ struct page *page;
+
+ if (unlikely(!pfn_valid(pfn)))
+ return pte;
+ page = pfn_to_page(pfn);
+
+ if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) {
+ pr_debug("do_dcache_icache_coherency... flushing\n");
+ flush_dcache_icache_page(page);
+ set_bit(PG_arch_1, &page->flags);
+ }
+ else
+ pr_debug("do_dcache_icache_coherency... already clean\n");
+ return __pte(pte_val(pte) | _PAGE_HWEXEC);
+}
+
+static inline int is_exec_fault(void)
+{
+ return current->thread.regs && TRAP(current->thread.regs) == 0x400;
+}
+
+/* We only try to do i/d cache coherency on stuff that looks like
+ * reasonably "normal" PTEs. We currently require a PTE to be present
+ * and we avoid _PAGE_SPECIAL and _PAGE_NO_CACHE
+ */
+static inline int pte_looks_normal(pte_t pte)
+{
+ return (pte_val(pte) &
+ (_PAGE_PRESENT | _PAGE_SPECIAL | _PAGE_NO_CACHE)) ==
+ (_PAGE_PRESENT);
+}
+
+#if defined(CONFIG_PPC_STD_MMU)
+/* Server-style MMU handles coherency when hashing if HW exec permission
+ * is supposed per page (currently 64-bit only). Else, we always flush
+ * valid PTEs in set_pte.
+ */
+static inline int pte_need_exec_flush(pte_t pte, int set_pte)
+{
+ return set_pte && pte_looks_normal(pte) &&
+ !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) ||
+ cpu_has_feature(CPU_FTR_NOEXECUTE));
+}
+#elif _PAGE_HWEXEC == 0
+/* Embedded type MMU without HW exec support (8xx only so far), we flush
+ * the cache for any present PTE
+ */
+static inline int pte_need_exec_flush(pte_t pte, int set_pte)
+{
+ return set_pte && pte_looks_normal(pte);
+}
+#else
+/* Other embedded CPUs with HW exec support per-page, we flush on exec
+ * fault if HWEXEC is not set
+ */
+static inline int pte_need_exec_flush(pte_t pte, int set_pte)
+{
+ return pte_looks_normal(pte) && is_exec_fault() &&
+ !(pte_val(pte) & _PAGE_HWEXEC);
+}
+#endif
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ */
+void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
+{
+#ifdef CONFIG_DEBUG_VM
+ WARN_ON(pte_present(*ptep));
+#endif
+ /* Note: mm->context.id might not yet have been assigned as
+ * this context might not have been activated yet when this
+ * is called.
+ */
+ pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
+ if (pte_need_exec_flush(pte, 1))
+ pte = do_dcache_icache_coherency(pte);
+
+ /* Perform the setting of the PTE */
+ __set_pte_at(mm, addr, ptep, pte, 0);
+}
+
+/*
+ * This is called when relaxing access to a PTE. It's also called in the page
+ * fault path when we don't hit any of the major fault cases, ie, a minor
+ * update of _PAGE_ACCESSED, _PAGE_DIRTY, etc... The generic code will have
+ * handled those two for us, we additionally deal with missing execute
+ * permission here on some processors
+ */
+int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
+ pte_t *ptep, pte_t entry, int dirty)
+{
+ int changed;
+ if (!dirty && pte_need_exec_flush(entry, 0))
+ entry = do_dcache_icache_coherency(entry);
+ changed = !pte_same(*(ptep), entry);
+ if (changed) {
+ assert_pte_locked(vma->vm_mm, address);
+ __ptep_set_access_flags(ptep, entry);
+ flush_tlb_page_nohash(vma, address);
+ }
+ return changed;
+}
+
+#ifdef CONFIG_DEBUG_VM
+void assert_pte_locked(struct mm_struct *mm, unsigned long addr)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+
+ if (mm == &init_mm)
+ return;
+ pgd = mm->pgd + pgd_index(addr);
+ BUG_ON(pgd_none(*pgd));
+ pud = pud_offset(pgd, addr);
+ BUG_ON(pud_none(*pud));
+ pmd = pmd_offset(pud, addr);
+ BUG_ON(!pmd_present(*pmd));
+ BUG_ON(!spin_is_locked(pte_lockptr(mm, pmd)));
+}
+#endif /* CONFIG_DEBUG_VM */
+
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 58bcaeb..430d090 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -129,7 +129,8 @@
void __iomem *
ioremap(phys_addr_t addr, unsigned long size)
{
- return __ioremap(addr, size, _PAGE_NO_CACHE | _PAGE_GUARDED);
+ return __ioremap_caller(addr, size, _PAGE_NO_CACHE | _PAGE_GUARDED,
+ __builtin_return_address(0));
}
EXPORT_SYMBOL(ioremap);
@@ -143,20 +144,27 @@
/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
flags &= ~(_PAGE_USER | _PAGE_EXEC | _PAGE_HWEXEC);
- return __ioremap(addr, size, flags);
+ return __ioremap_caller(addr, size, flags, __builtin_return_address(0));
}
EXPORT_SYMBOL(ioremap_flags);
void __iomem *
__ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
{
+ return __ioremap_caller(addr, size, flags, __builtin_return_address(0));
+}
+
+void __iomem *
+__ioremap_caller(phys_addr_t addr, unsigned long size, unsigned long flags,
+ void *caller)
+{
unsigned long v, i;
phys_addr_t p;
int err;
/* Make sure we have the base flags */
if ((flags & _PAGE_PRESENT) == 0)
- flags |= _PAGE_KERNEL;
+ flags |= PAGE_KERNEL;
/* Non-cacheable page cannot be coherent */
if (flags & _PAGE_NO_CACHE)
@@ -212,7 +220,7 @@
if (mem_init_done) {
struct vm_struct *area;
- area = get_vm_area(size, VM_IOREMAP);
+ area = get_vm_area_caller(size, VM_IOREMAP, caller);
if (area == 0)
return NULL;
v = (unsigned long) area->addr;
@@ -288,7 +296,7 @@
p = memstart_addr + s;
for (; s < total_lowmem; s += PAGE_SIZE) {
ktext = ((char *) v >= _stext && (char *) v < etext);
- f = ktext ?_PAGE_RAM_TEXT : _PAGE_RAM;
+ f = ktext ? PAGE_KERNEL_TEXT : PAGE_KERNEL;
map_page(v, p, f);
#ifdef CONFIG_PPC_STD_MMU_32
if (ktext)
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 365e61a..bfa7db6 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -144,8 +144,8 @@
unmap_kernel_range((unsigned long)ea, size);
}
-void __iomem * __ioremap(phys_addr_t addr, unsigned long size,
- unsigned long flags)
+void __iomem * __ioremap_caller(phys_addr_t addr, unsigned long size,
+ unsigned long flags, void *caller)
{
phys_addr_t paligned;
void __iomem *ret;
@@ -168,8 +168,9 @@
if (mem_init_done) {
struct vm_struct *area;
- area = __get_vm_area(size, VM_IOREMAP,
- ioremap_bot, IOREMAP_END);
+ area = __get_vm_area_caller(size, VM_IOREMAP,
+ ioremap_bot, IOREMAP_END,
+ caller);
if (area == NULL)
return NULL;
ret = __ioremap_at(paligned, area->addr, size, flags);
@@ -186,19 +187,27 @@
return ret;
}
+void __iomem * __ioremap(phys_addr_t addr, unsigned long size,
+ unsigned long flags)
+{
+ return __ioremap_caller(addr, size, flags, __builtin_return_address(0));
+}
void __iomem * ioremap(phys_addr_t addr, unsigned long size)
{
unsigned long flags = _PAGE_NO_CACHE | _PAGE_GUARDED;
+ void *caller = __builtin_return_address(0);
if (ppc_md.ioremap)
- return ppc_md.ioremap(addr, size, flags);
- return __ioremap(addr, size, flags);
+ return ppc_md.ioremap(addr, size, flags, caller);
+ return __ioremap_caller(addr, size, flags, caller);
}
void __iomem * ioremap_flags(phys_addr_t addr, unsigned long size,
unsigned long flags)
{
+ void *caller = __builtin_return_address(0);
+
/* writeable implies dirty for kernel addresses */
if (flags & _PAGE_RW)
flags |= _PAGE_DIRTY;
@@ -207,8 +216,8 @@
flags &= ~(_PAGE_USER | _PAGE_EXEC);
if (ppc_md.ioremap)
- return ppc_md.ioremap(addr, size, flags);
- return __ioremap(addr, size, flags);
+ return ppc_md.ioremap(addr, size, flags, caller);
+ return __ioremap_caller(addr, size, flags, caller);
}
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index fe65c40..2d2a87e 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -74,9 +74,6 @@
unsigned long __init mmu_mapin_ram(void)
{
-#ifdef CONFIG_POWER4
- return 0;
-#else
unsigned long tot, bl, done;
unsigned long max_size = (256<<20);
@@ -95,7 +92,7 @@
break;
}
- setbat(2, PAGE_OFFSET, 0, bl, _PAGE_RAM);
+ setbat(2, PAGE_OFFSET, 0, bl, PAGE_KERNEL_X);
done = (unsigned long)bat_addrs[2].limit - PAGE_OFFSET + 1;
if ((done < tot) && !bat_addrs[3].limit) {
/* use BAT3 to cover a bit more */
@@ -103,12 +100,11 @@
for (bl = 128<<10; bl < max_size; bl <<= 1)
if (bl * 2 > tot)
break;
- setbat(3, PAGE_OFFSET+done, done, bl, _PAGE_RAM);
+ setbat(3, PAGE_OFFSET+done, done, bl, PAGE_KERNEL_X);
done = (unsigned long)bat_addrs[3].limit - PAGE_OFFSET + 1;
}
return done;
-#endif
}
/*
@@ -136,9 +132,7 @@
wimgxpp |= (flags & _PAGE_RW)? BPP_RW: BPP_RX;
bat[1].batu = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */
bat[1].batl = BAT_PHYS_ADDR(phys) | wimgxpp;
-#ifndef CONFIG_KGDB /* want user access for breakpoints */
if (flags & _PAGE_USER)
-#endif
bat[1].batu |= 1; /* Vp = 1 */
if (flags & _PAGE_GUARDED) {
/* G bit must be zero in IBATs */
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index c931bc7..1be1b5e 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -139,12 +139,12 @@
*/
void __flush_tlb_pending(struct ppc64_tlb_batch *batch)
{
- cpumask_t tmp;
+ const struct cpumask *tmp;
int i, local = 0;
i = batch->index;
- tmp = cpumask_of_cpu(smp_processor_id());
- if (cpus_equal(batch->mm->cpu_vm_mask, tmp))
+ tmp = cpumask_of(smp_processor_id());
+ if (cpumask_equal(mm_cpumask(batch->mm), tmp))
local = 1;
if (i == 1)
flush_hash_page(batch->vaddr[0], batch->pte[0],
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 39ac22b..7af7297 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -132,11 +132,11 @@
pid = mm->context.id;
if (unlikely(pid == MMU_NO_CONTEXT))
goto no_context;
- cpu_mask = mm->cpu_vm_mask;
- cpu_clear(smp_processor_id(), cpu_mask);
- if (!cpus_empty(cpu_mask)) {
+ if (!cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) {
struct tlb_flush_param p = { .pid = pid };
- smp_call_function_mask(cpu_mask, do_flush_tlb_mm_ipi, &p, 1);
+ /* Ignores smp_processor_id() even if set. */
+ smp_call_function_many(mm_cpumask(mm),
+ do_flush_tlb_mm_ipi, &p, 1);
}
_tlbil_pid(pid);
no_context:
@@ -146,16 +146,15 @@
void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
{
- cpumask_t cpu_mask;
+ struct cpumask *cpu_mask;
unsigned int pid;
preempt_disable();
pid = vma ? vma->vm_mm->context.id : 0;
if (unlikely(pid == MMU_NO_CONTEXT))
goto bail;
- cpu_mask = vma->vm_mm->cpu_vm_mask;
- cpu_clear(smp_processor_id(), cpu_mask);
- if (!cpus_empty(cpu_mask)) {
+ cpu_mask = mm_cpumask(vma->vm_mm);
+ if (!cpumask_equal(cpu_mask, cpumask_of(smp_processor_id()))) {
/* If broadcast tlbivax is supported, use it */
if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) {
int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL);
@@ -167,7 +166,8 @@
goto bail;
} else {
struct tlb_flush_param p = { .pid = pid, .addr = vmaddr };
- smp_call_function_mask(cpu_mask,
+ /* Ignores smp_processor_id() even if set in cpu_mask */
+ smp_call_function_many(cpu_mask,
do_flush_tlb_page_ipi, &p, 1);
}
}
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index f900a39..788b87c 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -118,25 +118,50 @@
#elif defined(CONFIG_FSL_BOOKE)
/*
- * FSL BookE implementations. Currently _pid and _all are the
- * same. This will change when tlbilx is actually supported and
- * performs invalidate-by-PID. This change will be driven by
- * mmu_features conditional
+ * FSL BookE implementations.
+ *
+ * Since feature sections are using _SECTION_ELSE we need
+ * to have the larger code path before the _SECTION_ELSE
*/
+#define MMUCSR0_TLBFI (MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \
+ MMUCSR0_TLB2FI | MMUCSR0_TLB3FI)
/*
* Flush MMU TLB on the local processor
*/
-_GLOBAL(_tlbil_pid)
_GLOBAL(_tlbil_all)
-#define MMUCSR0_TLBFI (MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \
- MMUCSR0_TLB2FI | MMUCSR0_TLB3FI)
+BEGIN_MMU_FTR_SECTION
li r3,(MMUCSR0_TLBFI)@l
mtspr SPRN_MMUCSR0, r3
1:
mfspr r3,SPRN_MMUCSR0
andi. r3,r3,MMUCSR0_TLBFI@l
bne 1b
+MMU_FTR_SECTION_ELSE
+ PPC_TLBILX_ALL(0,0)
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
+ msync
+ isync
+ blr
+
+_GLOBAL(_tlbil_pid)
+BEGIN_MMU_FTR_SECTION
+ slwi r3,r3,16
+ mfmsr r10
+ wrteei 0
+ mfspr r4,SPRN_MAS6 /* save MAS6 */
+ mtspr SPRN_MAS6,r3
+ PPC_TLBILX_PID(0,0)
+ mtspr SPRN_MAS6,r4 /* restore MAS6 */
+ wrtee r10
+MMU_FTR_SECTION_ELSE
+ li r3,(MMUCSR0_TLBFI)@l
+ mtspr SPRN_MMUCSR0, r3
+1:
+ mfspr r3,SPRN_MMUCSR0
+ andi. r3,r3,MMUCSR0_TLBFI@l
+ bne 1b
+ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBILX)
msync
isync
blr
@@ -149,7 +174,9 @@
mfmsr r10
wrteei 0
slwi r4,r4,16
+ ori r4,r4,(MAS6_ISIZE(BOOK3E_PAGESZ_4K))@l
mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
+BEGIN_MMU_FTR_SECTION
tlbsx 0,r3
mfspr r4,SPRN_MAS1 /* check valid */
andis. r3,r4,MAS1_VALID@h
@@ -157,6 +184,9 @@
rlwinm r4,r4,0,1,31
mtspr SPRN_MAS1,r4
tlbwe
+MMU_FTR_SECTION_ELSE
+ PPC_TLBILX_VA(0,r3)
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
msync
isync
1: wrtee r10
diff --git a/arch/powerpc/oprofile/op_model_7450.c b/arch/powerpc/oprofile/op_model_7450.c
index cc599eb..f8d36f9 100644
--- a/arch/powerpc/oprofile/op_model_7450.c
+++ b/arch/powerpc/oprofile/op_model_7450.c
@@ -29,7 +29,7 @@
static unsigned long reset_value[OP_MAX_COUNTER];
static int oprofile_running;
-static u32 mmcr0_val, mmcr1_val, mmcr2_val;
+static u32 mmcr0_val, mmcr1_val, mmcr2_val, num_pmcs;
#define MMCR0_PMC1_SHIFT 6
#define MMCR0_PMC2_SHIFT 0
@@ -88,13 +88,12 @@
mtspr(SPRN_MMCR0, mmcr0_val);
mtspr(SPRN_MMCR1, mmcr1_val);
- mtspr(SPRN_MMCR2, mmcr2_val);
+ if (num_pmcs > 4)
+ mtspr(SPRN_MMCR2, mmcr2_val);
return 0;
}
-#define NUM_CTRS 6
-
/* Configures the global settings for the countes on all CPUs. */
static int fsl7450_reg_setup(struct op_counter_config *ctr,
struct op_system_config *sys,
@@ -102,12 +101,13 @@
{
int i;
+ num_pmcs = num_ctrs;
/* Our counters count up, and "count" refers to
* how much before the next interrupt, and we interrupt
* on overflow. So we calculate the starting value
* which will give us "count" until overflow.
* Then we set the events on the enabled counters */
- for (i = 0; i < NUM_CTRS; ++i)
+ for (i = 0; i < num_ctrs; ++i)
reset_value[i] = 0x80000000UL - ctr[i].count;
/* Set events for Counters 1 & 2 */
@@ -123,9 +123,10 @@
/* Set events for Counters 3-6 */
mmcr1_val = mmcr1_event3(ctr[2].event)
- | mmcr1_event4(ctr[3].event)
- | mmcr1_event5(ctr[4].event)
- | mmcr1_event6(ctr[5].event);
+ | mmcr1_event4(ctr[3].event);
+ if (num_ctrs > 4)
+ mmcr1_val |= mmcr1_event5(ctr[4].event)
+ | mmcr1_event6(ctr[5].event);
mmcr2_val = 0;
@@ -139,7 +140,7 @@
mtmsr(mfmsr() | MSR_PMM);
- for (i = 0; i < NUM_CTRS; ++i) {
+ for (i = 0; i < num_pmcs; ++i) {
if (ctr[i].enabled)
classic_ctr_write(i, reset_value[i]);
else
@@ -184,7 +185,7 @@
pc = mfspr(SPRN_SIAR);
is_kernel = is_kernel_addr(pc);
- for (i = 0; i < NUM_CTRS; ++i) {
+ for (i = 0; i < num_pmcs; ++i) {
val = classic_ctr_read(i);
if (val < 0) {
if (oprofile_running && ctr[i].enabled) {
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 3496bc0..bf5c7ff 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -118,6 +118,17 @@
help
This option enables support for the AMCC PPC460GT evaluation board.
+config REDWOOD
+ bool "Redwood"
+ depends on 44x
+ default n
+ select PPC44x_SIMPLE
+ select 460SX
+ select PCI
+ select PPC4xx_PCI_EXPRESS
+ help
+ This option enables support for the AMCC PPC460SX Redwood board.
+
config YOSEMITE
bool "Yosemite"
depends on 44x
@@ -220,6 +231,14 @@
select IBM_NEW_EMAC_EMAC4
select IBM_NEW_EMAC_TAH
+config 460SX
+ bool
+ select PPC_FPU
+ select IBM_NEW_EMAC_EMAC4
+ select IBM_NEW_EMAC_RGMII
+ select IBM_NEW_EMAC_ZMII
+ select IBM_NEW_EMAC_TAH
+
# 44x errata/workaround config symbols, selected by the CPU models above
config IBM440EP_ERR42
bool
diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c
index 76fdc51..5bcd441 100644
--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -57,6 +57,7 @@
"ibm,ebony",
"amcc,katmai",
"amcc,rainier",
+ "amcc,redwood",
"amcc,sequoia",
"amcc,taishan",
"amcc,yosemite"
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index 326852c..4dac9b0 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -12,7 +12,7 @@
config MPC5121_ADS
bool "Freescale MPC5121E ADS"
- depends on PPC_MULTIPLATFORM && PPC32
+ depends on 6xx
select DEFAULT_UIMAGE
select PPC_MPC5121
select MPC5121_ADS_CPLD
@@ -21,7 +21,7 @@
config MPC5121_GENERIC
bool "Generic support for simple MPC5121 based boards"
- depends on PPC_MULTIPLATFORM && PPC32
+ depends on 6xx
select DEFAULT_UIMAGE
select PPC_MPC5121
help
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 696a5ee..8b8e956 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -1,6 +1,6 @@
config PPC_MPC52xx
bool "52xx-based boards"
- depends on PPC_MULTIPLATFORM && PPC32
+ depends on 6xx
select PPC_CLOCK
select PPC_PCI_CHOICE
@@ -21,7 +21,13 @@
and if there is a PCI bus node defined in the device tree.
Boards that are compatible with this generic platform support
- are: 'tqc,tqm5200', 'promess,motionpro', 'schindler,cm5200'.
+ are:
+ intercontrol,digsy-mtc
+ phytec,pcm030
+ phytec,pcm032
+ promess,motionpro
+ schindler,cm5200
+ tqc,tqm5200
config PPC_EFIKA
bool "bPlan Efika 5k2. MPC5200B based computer"
@@ -35,6 +41,11 @@
depends on PPC_MPC52xx
select DEFAULT_UIMAGE
+config PPC_MEDIA5200
+ bool "Freescale Media5200 Eval Board"
+ depends on PPC_MPC52xx
+ select DEFAULT_UIMAGE
+
config PPC_MPC5200_BUGFIX
bool "MPC5200 (L25R) bugfix support"
depends on PPC_MPC52xx
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index b8a5206..bfd4f52 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -1,12 +1,13 @@
#
# Makefile for 52xx based boards
#
-obj-y += mpc52xx_pic.o mpc52xx_common.o
+obj-y += mpc52xx_pic.o mpc52xx_common.o mpc52xx_gpt.o
obj-$(CONFIG_PCI) += mpc52xx_pci.o
obj-$(CONFIG_PPC_MPC5200_SIMPLE) += mpc5200_simple.o
obj-$(CONFIG_PPC_EFIKA) += efika.o
obj-$(CONFIG_PPC_LITE5200) += lite5200.o
+obj-$(CONFIG_PPC_MEDIA5200) += media5200.o
obj-$(CONFIG_PM) += mpc52xx_sleep.o mpc52xx_pm.o
ifeq ($(CONFIG_PPC_LITE5200),y)
diff --git a/arch/powerpc/platforms/52xx/media5200.c b/arch/powerpc/platforms/52xx/media5200.c
new file mode 100644
index 0000000..68e4f16
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/media5200.c
@@ -0,0 +1,273 @@
+/*
+ * Support for 'media5200-platform' compatible boards.
+ *
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Description:
+ * This code implements support for the Freescape Media5200 platform
+ * (built around the MPC5200 SoC).
+ *
+ * Notable characteristic of the Media5200 is the presence of an FPGA
+ * that has all external IRQ lines routed through it. This file implements
+ * a cascaded interrupt controller driver which attaches itself to the
+ * Virtual IRQ subsystem after the primary mpc5200 interrupt controller
+ * is initialized.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <asm/time.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/mpc52xx.h>
+
+static struct of_device_id mpc5200_gpio_ids[] __initdata = {
+ { .compatible = "fsl,mpc5200-gpio", },
+ { .compatible = "mpc5200-gpio", },
+ {}
+};
+
+/* FPGA register set */
+#define MEDIA5200_IRQ_ENABLE (0x40c)
+#define MEDIA5200_IRQ_STATUS (0x410)
+#define MEDIA5200_NUM_IRQS (6)
+#define MEDIA5200_IRQ_SHIFT (32 - MEDIA5200_NUM_IRQS)
+
+struct media5200_irq {
+ void __iomem *regs;
+ spinlock_t lock;
+ struct irq_host *irqhost;
+};
+struct media5200_irq media5200_irq;
+
+static void media5200_irq_unmask(unsigned int virq)
+{
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&media5200_irq.lock, flags);
+ val = in_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE);
+ val |= 1 << (MEDIA5200_IRQ_SHIFT + irq_map[virq].hwirq);
+ out_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE, val);
+ spin_unlock_irqrestore(&media5200_irq.lock, flags);
+}
+
+static void media5200_irq_mask(unsigned int virq)
+{
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&media5200_irq.lock, flags);
+ val = in_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE);
+ val &= ~(1 << (MEDIA5200_IRQ_SHIFT + irq_map[virq].hwirq));
+ out_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE, val);
+ spin_unlock_irqrestore(&media5200_irq.lock, flags);
+}
+
+static struct irq_chip media5200_irq_chip = {
+ .typename = "Media5200 FPGA",
+ .unmask = media5200_irq_unmask,
+ .mask = media5200_irq_mask,
+ .mask_ack = media5200_irq_mask,
+};
+
+void media5200_irq_cascade(unsigned int virq, struct irq_desc *desc)
+{
+ int sub_virq, val;
+ u32 status, enable;
+
+ /* Mask off the cascaded IRQ */
+ spin_lock(&desc->lock);
+ desc->chip->mask(virq);
+ spin_unlock(&desc->lock);
+
+ /* Ask the FPGA for IRQ status. If 'val' is 0, then no irqs
+ * are pending. 'ffs()' is 1 based */
+ status = in_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE);
+ enable = in_be32(media5200_irq.regs + MEDIA5200_IRQ_STATUS);
+ val = ffs((status & enable) >> MEDIA5200_IRQ_SHIFT);
+ if (val) {
+ sub_virq = irq_linear_revmap(media5200_irq.irqhost, val - 1);
+ /* pr_debug("%s: virq=%i s=%.8x e=%.8x hwirq=%i subvirq=%i\n",
+ * __func__, virq, status, enable, val - 1, sub_virq);
+ */
+ generic_handle_irq(sub_virq);
+ }
+
+ /* Processing done; can reenable the cascade now */
+ spin_lock(&desc->lock);
+ desc->chip->ack(virq);
+ if (!(desc->status & IRQ_DISABLED))
+ desc->chip->unmask(virq);
+ spin_unlock(&desc->lock);
+}
+
+static int media5200_irq_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct irq_desc *desc = get_irq_desc(virq);
+
+ pr_debug("%s: h=%p, virq=%i, hwirq=%i\n", __func__, h, virq, (int)hw);
+ set_irq_chip_data(virq, &media5200_irq);
+ set_irq_chip_and_handler(virq, &media5200_irq_chip, handle_level_irq);
+ set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
+ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ desc->status |= IRQ_TYPE_LEVEL_LOW | IRQ_LEVEL;
+
+ return 0;
+}
+
+static int media5200_irq_xlate(struct irq_host *h, struct device_node *ct,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq,
+ unsigned int *out_flags)
+{
+ if (intsize != 2)
+ return -1;
+
+ pr_debug("%s: bank=%i, number=%i\n", __func__, intspec[0], intspec[1]);
+ *out_hwirq = intspec[1];
+ *out_flags = IRQ_TYPE_NONE;
+ return 0;
+}
+
+static struct irq_host_ops media5200_irq_ops = {
+ .map = media5200_irq_map,
+ .xlate = media5200_irq_xlate,
+};
+
+/*
+ * Setup Media5200 IRQ mapping
+ */
+static void __init media5200_init_irq(void)
+{
+ struct device_node *fpga_np;
+ int cascade_virq;
+
+ /* First setup the regular MPC5200 interrupt controller */
+ mpc52xx_init_irq();
+
+ /* Now find the FPGA IRQ */
+ fpga_np = of_find_compatible_node(NULL, NULL, "fsl,media5200-fpga");
+ if (!fpga_np)
+ goto out;
+ pr_debug("%s: found fpga node: %s\n", __func__, fpga_np->full_name);
+
+ media5200_irq.regs = of_iomap(fpga_np, 0);
+ if (!media5200_irq.regs)
+ goto out;
+ pr_debug("%s: mapped to %p\n", __func__, media5200_irq.regs);
+
+ cascade_virq = irq_of_parse_and_map(fpga_np, 0);
+ if (!cascade_virq)
+ goto out;
+ pr_debug("%s: cascaded on virq=%i\n", __func__, cascade_virq);
+
+ /* Disable all FPGA IRQs */
+ out_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE, 0);
+
+ spin_lock_init(&media5200_irq.lock);
+
+ media5200_irq.irqhost = irq_alloc_host(fpga_np, IRQ_HOST_MAP_LINEAR,
+ MEDIA5200_NUM_IRQS,
+ &media5200_irq_ops, -1);
+ if (!media5200_irq.irqhost)
+ goto out;
+ pr_debug("%s: allocated irqhost\n", __func__);
+
+ media5200_irq.irqhost->host_data = &media5200_irq;
+
+ set_irq_data(cascade_virq, &media5200_irq);
+ set_irq_chained_handler(cascade_virq, media5200_irq_cascade);
+
+ return;
+
+ out:
+ pr_err("Could not find Media5200 FPGA; PCI interrupts will not work\n");
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init media5200_setup_arch(void)
+{
+
+ struct device_node *np;
+ struct mpc52xx_gpio __iomem *gpio;
+ u32 port_config;
+
+ if (ppc_md.progress)
+ ppc_md.progress("media5200_setup_arch()", 0);
+
+ /* Map important registers from the internal memory map */
+ mpc52xx_map_common_devices();
+
+ /* Some mpc5200 & mpc5200b related configuration */
+ mpc5200_setup_xlb_arbiter();
+
+ mpc52xx_setup_pci();
+
+ np = of_find_matching_node(NULL, mpc5200_gpio_ids);
+ gpio = of_iomap(np, 0);
+ of_node_put(np);
+ if (!gpio) {
+ printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
+ __func__);
+ return;
+ }
+
+ /* Set port config */
+ port_config = in_be32(&gpio->port_config);
+
+ port_config &= ~0x03000000; /* ATA CS is on csb_4/5 */
+ port_config |= 0x01000000;
+
+ out_be32(&gpio->port_config, port_config);
+
+ /* Unmap zone */
+ iounmap(gpio);
+
+}
+
+/* list of the supported boards */
+static char *board[] __initdata = {
+ "fsl,media5200",
+ NULL
+};
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init media5200_probe(void)
+{
+ unsigned long node = of_get_flat_dt_root();
+ int i = 0;
+
+ while (board[i]) {
+ if (of_flat_dt_is_compatible(node, board[i]))
+ break;
+ i++;
+ }
+
+ return (board[i] != NULL);
+}
+
+define_machine(media5200_platform) {
+ .name = "media5200-platform",
+ .probe = media5200_probe,
+ .setup_arch = media5200_setup_arch,
+ .init = mpc52xx_declare_of_platform_devices,
+ .init_IRQ = media5200_init_irq,
+ .get_irq = mpc52xx_get_irq,
+ .restart = mpc52xx_restart,
+ .calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index a3bda0b..c31e5b5 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -50,8 +50,10 @@
/* list of the supported boards */
static char *board[] __initdata = {
- "promess,motionpro",
+ "intercontrol,digsy-mtc",
"phytec,pcm030",
+ "phytec,pcm032",
+ "promess,motionpro",
"schindler,cm5200",
"tqc,tqm5200",
NULL
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 98367a0..8e3dd5a 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -28,9 +28,10 @@
static struct of_device_id mpc52xx_bus_ids[] __initdata = {
{ .compatible = "fsl,mpc5200-immr", },
{ .compatible = "fsl,mpc5200b-immr", },
- { .compatible = "fsl,lpb", },
+ { .compatible = "simple-bus", },
/* depreciated matches; shouldn't be used in new device trees */
+ { .compatible = "fsl,lpb", },
{ .type = "builtin", .compatible = "mpc5200", }, /* efika */
{ .type = "soc", .compatible = "mpc5200", }, /* lite5200 */
{}
@@ -205,6 +206,43 @@
EXPORT_SYMBOL(mpc52xx_set_psc_clkdiv);
/**
+ * mpc52xx_get_xtal_freq - Get SYS_XTAL_IN frequency for a device
+ *
+ * @node: device node
+ *
+ * Returns the frequency of the external oscillator clock connected
+ * to the SYS_XTAL_IN pin, or 0 if it cannot be determined.
+ */
+unsigned int mpc52xx_get_xtal_freq(struct device_node *node)
+{
+ u32 val;
+ unsigned int freq;
+
+ if (!mpc52xx_cdm)
+ return 0;
+
+ freq = mpc52xx_find_ipb_freq(node);
+ if (!freq)
+ return 0;
+
+ if (in_8(&mpc52xx_cdm->ipb_clk_sel) & 0x1)
+ freq *= 2;
+
+ val = in_be32(&mpc52xx_cdm->rstcfg);
+ if (val & (1 << 5))
+ freq *= 8;
+ else
+ freq *= 4;
+ if (val & (1 << 6))
+ freq /= 12;
+ else
+ freq /= 16;
+
+ return freq;
+}
+EXPORT_SYMBOL(mpc52xx_get_xtal_freq);
+
+/**
* mpc52xx_restart: ppc_md->restart hook for mpc5200 using the watchdog timer
*/
void
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
index 07f89ae..2b8d8ef 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
@@ -354,88 +354,6 @@
.remove = mpc52xx_gpiochip_remove,
};
-/*
- * GPIO LIB API implementation for gpt GPIOs.
- *
- * Each gpt only has a single GPIO.
- */
-static int mpc52xx_gpt_gpio_get(struct gpio_chip *gc, unsigned int gpio)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
-
- return (in_be32(®s->status) & (1 << (31 - 23))) ? 1 : 0;
-}
-
-static void
-mpc52xx_gpt_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
-
- if (val)
- out_be32(®s->mode, 0x34);
- else
- out_be32(®s->mode, 0x24);
-
- pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
-}
-
-static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
-
- out_be32(®s->mode, 0x04);
-
- return 0;
-}
-
-static int
-mpc52xx_gpt_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- mpc52xx_gpt_gpio_set(gc, gpio, val);
- pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
-
- return 0;
-}
-
-static int __devinit mpc52xx_gpt_gpiochip_probe(struct of_device *ofdev,
- const struct of_device_id *match)
-{
- struct of_mm_gpio_chip *mmchip;
- struct of_gpio_chip *chip;
-
- mmchip = kzalloc(sizeof(*mmchip), GFP_KERNEL);
- if (!mmchip)
- return -ENOMEM;
-
- chip = &mmchip->of_gc;
-
- chip->gpio_cells = 2;
- chip->gc.ngpio = 1;
- chip->gc.direction_input = mpc52xx_gpt_gpio_dir_in;
- chip->gc.direction_output = mpc52xx_gpt_gpio_dir_out;
- chip->gc.get = mpc52xx_gpt_gpio_get;
- chip->gc.set = mpc52xx_gpt_gpio_set;
-
- return of_mm_gpiochip_add(ofdev->node, mmchip);
-}
-
-static const struct of_device_id mpc52xx_gpt_gpiochip_match[] = {
- {
- .compatible = "fsl,mpc5200-gpt-gpio",
- },
- {}
-};
-
-static struct of_platform_driver mpc52xx_gpt_gpiochip_driver = {
- .name = "gpio_gpt",
- .match_table = mpc52xx_gpt_gpiochip_match,
- .probe = mpc52xx_gpt_gpiochip_probe,
- .remove = mpc52xx_gpiochip_remove,
-};
-
static int __init mpc52xx_gpio_init(void)
{
if (of_register_platform_driver(&mpc52xx_wkup_gpiochip_driver))
@@ -444,9 +362,6 @@
if (of_register_platform_driver(&mpc52xx_simple_gpiochip_driver))
printk(KERN_ERR "Unable to register simple GPIO driver\n");
- if (of_register_platform_driver(&mpc52xx_gpt_gpiochip_driver))
- printk(KERN_ERR "Unable to register gpt GPIO driver\n");
-
return 0;
}
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
new file mode 100644
index 0000000..bfbcd41
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -0,0 +1,396 @@
+/*
+ * MPC5200 General Purpose Timer device driver
+ *
+ * Copyright (c) 2009 Secret Lab Technologies Ltd.
+ * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This file is a driver for the the General Purpose Timer (gpt) devices
+ * found on the MPC5200 SoC. Each timer has an IO pin which can be used
+ * for GPIO or can be used to raise interrupts. The timer function can
+ * be used independently from the IO pin, or it can be used to control
+ * output signals or measure input signals.
+ *
+ * This driver supports the GPIO and IRQ controller functions of the GPT
+ * device. Timer functions are not yet supported, nor is the watchdog
+ * timer.
+ *
+ * To use the GPIO function, the following two properties must be added
+ * to the device tree node for the gpt device (typically in the .dts file
+ * for the board):
+ * gpio-controller;
+ * #gpio-cells = < 2 >;
+ * This driver will register the GPIO pin if it finds the gpio-controller
+ * property in the device tree.
+ *
+ * To use the IRQ controller function, the following two properties must
+ * be added to the device tree node for the gpt device:
+ * interrupt-controller;
+ * #interrupt-cells = < 1 >;
+ * The IRQ controller binding only uses one cell to specify the interrupt,
+ * and the IRQ flags are encoded in the cell. A cell is not used to encode
+ * the IRQ number because the GPT only has a single IRQ source. For flags,
+ * a value of '1' means rising edge sensitive and '2' means falling edge.
+ *
+ * The GPIO and the IRQ controller functions can be used at the same time,
+ * but in this use case the IO line will only work as an input. Trying to
+ * use it as a GPIO output will not work.
+ *
+ * When using the GPIO line as an output, it can either be driven as normal
+ * IO, or it can be an Open Collector (OC) output. At the moment it is the
+ * responsibility of either the bootloader or the platform setup code to set
+ * the output mode. This driver does not change the output mode setting.
+ */
+
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/kernel.h>
+#include <asm/mpc52xx.h>
+
+MODULE_DESCRIPTION("Freescale MPC52xx gpt driver");
+MODULE_AUTHOR("Sascha Hauer, Grant Likely");
+MODULE_LICENSE("GPL");
+
+/**
+ * struct mpc52xx_gpt - Private data structure for MPC52xx GPT driver
+ * @dev: pointer to device structure
+ * @regs: virtual address of GPT registers
+ * @lock: spinlock to coordinate between different functions.
+ * @of_gc: of_gpio_chip instance structure; used when GPIO is enabled
+ * @irqhost: Pointer to irq_host instance; used when IRQ mode is supported
+ */
+struct mpc52xx_gpt_priv {
+ struct device *dev;
+ struct mpc52xx_gpt __iomem *regs;
+ spinlock_t lock;
+ struct irq_host *irqhost;
+
+#if defined(CONFIG_GPIOLIB)
+ struct of_gpio_chip of_gc;
+#endif
+};
+
+#define MPC52xx_GPT_MODE_MS_MASK (0x07)
+#define MPC52xx_GPT_MODE_MS_IC (0x01)
+#define MPC52xx_GPT_MODE_MS_OC (0x02)
+#define MPC52xx_GPT_MODE_MS_PWM (0x03)
+#define MPC52xx_GPT_MODE_MS_GPIO (0x04)
+
+#define MPC52xx_GPT_MODE_GPIO_MASK (0x30)
+#define MPC52xx_GPT_MODE_GPIO_OUT_LOW (0x20)
+#define MPC52xx_GPT_MODE_GPIO_OUT_HIGH (0x30)
+
+#define MPC52xx_GPT_MODE_IRQ_EN (0x0100)
+
+#define MPC52xx_GPT_MODE_ICT_MASK (0x030000)
+#define MPC52xx_GPT_MODE_ICT_RISING (0x010000)
+#define MPC52xx_GPT_MODE_ICT_FALLING (0x020000)
+#define MPC52xx_GPT_MODE_ICT_TOGGLE (0x030000)
+
+#define MPC52xx_GPT_STATUS_IRQMASK (0x000f)
+
+/* ---------------------------------------------------------------------
+ * Cascaded interrupt controller hooks
+ */
+
+static void mpc52xx_gpt_irq_unmask(unsigned int virq)
+{
+ struct mpc52xx_gpt_priv *gpt = get_irq_chip_data(virq);
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpt->lock, flags);
+ setbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_IRQ_EN);
+ spin_unlock_irqrestore(&gpt->lock, flags);
+}
+
+static void mpc52xx_gpt_irq_mask(unsigned int virq)
+{
+ struct mpc52xx_gpt_priv *gpt = get_irq_chip_data(virq);
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpt->lock, flags);
+ clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_IRQ_EN);
+ spin_unlock_irqrestore(&gpt->lock, flags);
+}
+
+static void mpc52xx_gpt_irq_ack(unsigned int virq)
+{
+ struct mpc52xx_gpt_priv *gpt = get_irq_chip_data(virq);
+
+ out_be32(&gpt->regs->status, MPC52xx_GPT_STATUS_IRQMASK);
+}
+
+static int mpc52xx_gpt_irq_set_type(unsigned int virq, unsigned int flow_type)
+{
+ struct mpc52xx_gpt_priv *gpt = get_irq_chip_data(virq);
+ unsigned long flags;
+ u32 reg;
+
+ dev_dbg(gpt->dev, "%s: virq=%i type=%x\n", __func__, virq, flow_type);
+
+ spin_lock_irqsave(&gpt->lock, flags);
+ reg = in_be32(&gpt->regs->mode) & ~MPC52xx_GPT_MODE_ICT_MASK;
+ if (flow_type & IRQF_TRIGGER_RISING)
+ reg |= MPC52xx_GPT_MODE_ICT_RISING;
+ if (flow_type & IRQF_TRIGGER_FALLING)
+ reg |= MPC52xx_GPT_MODE_ICT_FALLING;
+ out_be32(&gpt->regs->mode, reg);
+ spin_unlock_irqrestore(&gpt->lock, flags);
+
+ return 0;
+}
+
+static struct irq_chip mpc52xx_gpt_irq_chip = {
+ .typename = "MPC52xx GPT",
+ .unmask = mpc52xx_gpt_irq_unmask,
+ .mask = mpc52xx_gpt_irq_mask,
+ .ack = mpc52xx_gpt_irq_ack,
+ .set_type = mpc52xx_gpt_irq_set_type,
+};
+
+void mpc52xx_gpt_irq_cascade(unsigned int virq, struct irq_desc *desc)
+{
+ struct mpc52xx_gpt_priv *gpt = get_irq_data(virq);
+ int sub_virq;
+ u32 status;
+
+ status = in_be32(&gpt->regs->status) & MPC52xx_GPT_STATUS_IRQMASK;
+ if (status) {
+ sub_virq = irq_linear_revmap(gpt->irqhost, 0);
+ generic_handle_irq(sub_virq);
+ }
+}
+
+static int mpc52xx_gpt_irq_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct mpc52xx_gpt_priv *gpt = h->host_data;
+
+ dev_dbg(gpt->dev, "%s: h=%p, virq=%i\n", __func__, h, virq);
+ set_irq_chip_data(virq, gpt);
+ set_irq_chip_and_handler(virq, &mpc52xx_gpt_irq_chip, handle_edge_irq);
+
+ return 0;
+}
+
+static int mpc52xx_gpt_irq_xlate(struct irq_host *h, struct device_node *ct,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq,
+ unsigned int *out_flags)
+{
+ struct mpc52xx_gpt_priv *gpt = h->host_data;
+
+ dev_dbg(gpt->dev, "%s: flags=%i\n", __func__, intspec[0]);
+
+ if ((intsize < 1) || (intspec[0] < 1) || (intspec[0] > 3)) {
+ dev_err(gpt->dev, "bad irq specifier in %s\n", ct->full_name);
+ return -EINVAL;
+ }
+
+ *out_hwirq = 0; /* The GPT only has 1 IRQ line */
+ *out_flags = intspec[0];
+
+ return 0;
+}
+
+static struct irq_host_ops mpc52xx_gpt_irq_ops = {
+ .map = mpc52xx_gpt_irq_map,
+ .xlate = mpc52xx_gpt_irq_xlate,
+};
+
+static void
+mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node)
+{
+ int cascade_virq;
+ unsigned long flags;
+
+ /* Only setup cascaded IRQ if device tree claims the GPT is
+ * an interrupt controller */
+ if (!of_find_property(node, "interrupt-controller", NULL))
+ return;
+
+ cascade_virq = irq_of_parse_and_map(node, 0);
+
+ gpt->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, 1,
+ &mpc52xx_gpt_irq_ops, -1);
+ if (!gpt->irqhost) {
+ dev_err(gpt->dev, "irq_alloc_host() failed\n");
+ return;
+ }
+
+ gpt->irqhost->host_data = gpt;
+
+ set_irq_data(cascade_virq, gpt);
+ set_irq_chained_handler(cascade_virq, mpc52xx_gpt_irq_cascade);
+
+ /* Set to Input Capture mode */
+ spin_lock_irqsave(&gpt->lock, flags);
+ clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_MS_MASK,
+ MPC52xx_GPT_MODE_MS_IC);
+ spin_unlock_irqrestore(&gpt->lock, flags);
+
+ dev_dbg(gpt->dev, "%s() complete. virq=%i\n", __func__, cascade_virq);
+}
+
+
+/* ---------------------------------------------------------------------
+ * GPIOLIB hooks
+ */
+#if defined(CONFIG_GPIOLIB)
+static inline struct mpc52xx_gpt_priv *gc_to_mpc52xx_gpt(struct gpio_chip *gc)
+{
+ return container_of(to_of_gpio_chip(gc), struct mpc52xx_gpt_priv,of_gc);
+}
+
+static int mpc52xx_gpt_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct mpc52xx_gpt_priv *gpt = gc_to_mpc52xx_gpt(gc);
+
+ return (in_be32(&gpt->regs->status) >> 8) & 1;
+}
+
+static void
+mpc52xx_gpt_gpio_set(struct gpio_chip *gc, unsigned int gpio, int v)
+{
+ struct mpc52xx_gpt_priv *gpt = gc_to_mpc52xx_gpt(gc);
+ unsigned long flags;
+ u32 r;
+
+ dev_dbg(gpt->dev, "%s: gpio:%d v:%d\n", __func__, gpio, v);
+ r = v ? MPC52xx_GPT_MODE_GPIO_OUT_HIGH : MPC52xx_GPT_MODE_GPIO_OUT_LOW;
+
+ spin_lock_irqsave(&gpt->lock, flags);
+ clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_GPIO_MASK, r);
+ spin_unlock_irqrestore(&gpt->lock, flags);
+}
+
+static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct mpc52xx_gpt_priv *gpt = gc_to_mpc52xx_gpt(gc);
+ unsigned long flags;
+
+ dev_dbg(gpt->dev, "%s: gpio:%d\n", __func__, gpio);
+
+ spin_lock_irqsave(&gpt->lock, flags);
+ clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_GPIO_MASK);
+ spin_unlock_irqrestore(&gpt->lock, flags);
+
+ return 0;
+}
+
+static int
+mpc52xx_gpt_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ mpc52xx_gpt_gpio_set(gc, gpio, val);
+ return 0;
+}
+
+static void
+mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node)
+{
+ int rc;
+
+ /* Only setup GPIO if the device tree claims the GPT is
+ * a GPIO controller */
+ if (!of_find_property(node, "gpio-controller", NULL))
+ return;
+
+ gpt->of_gc.gc.label = kstrdup(node->full_name, GFP_KERNEL);
+ if (!gpt->of_gc.gc.label) {
+ dev_err(gpt->dev, "out of memory\n");
+ return;
+ }
+
+ gpt->of_gc.gpio_cells = 2;
+ gpt->of_gc.gc.ngpio = 1;
+ gpt->of_gc.gc.direction_input = mpc52xx_gpt_gpio_dir_in;
+ gpt->of_gc.gc.direction_output = mpc52xx_gpt_gpio_dir_out;
+ gpt->of_gc.gc.get = mpc52xx_gpt_gpio_get;
+ gpt->of_gc.gc.set = mpc52xx_gpt_gpio_set;
+ gpt->of_gc.gc.base = -1;
+ gpt->of_gc.xlate = of_gpio_simple_xlate;
+ node->data = &gpt->of_gc;
+ of_node_get(node);
+
+ /* Setup external pin in GPIO mode */
+ clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_MS_MASK,
+ MPC52xx_GPT_MODE_MS_GPIO);
+
+ rc = gpiochip_add(&gpt->of_gc.gc);
+ if (rc)
+ dev_err(gpt->dev, "gpiochip_add() failed; rc=%i\n", rc);
+
+ dev_dbg(gpt->dev, "%s() complete.\n", __func__);
+}
+#else /* defined(CONFIG_GPIOLIB) */
+static void
+mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *p, struct device_node *np) { }
+#endif /* defined(CONFIG_GPIOLIB) */
+
+/* ---------------------------------------------------------------------
+ * of_platform bus binding code
+ */
+static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct mpc52xx_gpt_priv *gpt;
+
+ gpt = kzalloc(sizeof *gpt, GFP_KERNEL);
+ if (!gpt)
+ return -ENOMEM;
+
+ spin_lock_init(&gpt->lock);
+ gpt->dev = &ofdev->dev;
+ gpt->regs = of_iomap(ofdev->node, 0);
+ if (!gpt->regs) {
+ kfree(gpt);
+ return -ENOMEM;
+ }
+
+ dev_set_drvdata(&ofdev->dev, gpt);
+
+ mpc52xx_gpt_gpio_setup(gpt, ofdev->node);
+ mpc52xx_gpt_irq_setup(gpt, ofdev->node);
+
+ return 0;
+}
+
+static int mpc52xx_gpt_remove(struct of_device *ofdev)
+{
+ return -EBUSY;
+}
+
+static const struct of_device_id mpc52xx_gpt_match[] = {
+ { .compatible = "fsl,mpc5200-gpt", },
+
+ /* Depreciated compatible values; don't use for new dts files */
+ { .compatible = "fsl,mpc5200-gpt-gpio", },
+ { .compatible = "mpc5200-gpt", },
+ {}
+};
+
+static struct of_platform_driver mpc52xx_gpt_driver = {
+ .name = "mpc52xx-gpt",
+ .match_table = mpc52xx_gpt_match,
+ .probe = mpc52xx_gpt_probe,
+ .remove = mpc52xx_gpt_remove,
+};
+
+static int __init mpc52xx_gpt_init(void)
+{
+ if (of_register_platform_driver(&mpc52xx_gpt_driver))
+ pr_err("error registering MPC52xx GPT driver\n");
+
+ return 0;
+}
+
+/* Make sure GPIOs and IRQs get set up before anyone tries to use them */
+subsys_initcall(mpc52xx_gpt_init);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index 0a093f0..480f806 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -163,8 +163,6 @@
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
- pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
-
io_be_clrbit(&intr->ctrl, 11 - l2irq);
}
@@ -176,8 +174,6 @@
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
- pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
-
io_be_setbit(&intr->ctrl, 11 - l2irq);
}
@@ -189,17 +185,15 @@
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
- pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
-
io_be_setbit(&intr->ctrl, 27-l2irq);
}
static int mpc52xx_extirq_set_type(unsigned int virq, unsigned int flow_type)
{
- struct irq_desc *desc = get_irq_desc(virq);
u32 ctrl_reg, type;
int irq;
int l2irq;
+ void *handler = handle_level_irq;
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
@@ -207,32 +201,21 @@
pr_debug("%s: irq=%x. l2=%d flow_type=%d\n", __func__, irq, l2irq, flow_type);
switch (flow_type) {
- case IRQF_TRIGGER_HIGH:
- type = 0;
- break;
- case IRQF_TRIGGER_RISING:
- type = 1;
- break;
- case IRQF_TRIGGER_FALLING:
- type = 2;
- break;
- case IRQF_TRIGGER_LOW:
- type = 3;
- break;
+ case IRQF_TRIGGER_HIGH: type = 0; break;
+ case IRQF_TRIGGER_RISING: type = 1; handler = handle_edge_irq; break;
+ case IRQF_TRIGGER_FALLING: type = 2; handler = handle_edge_irq; break;
+ case IRQF_TRIGGER_LOW: type = 3; break;
default:
type = 0;
}
- desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
- desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
- if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
- desc->status |= IRQ_LEVEL;
-
ctrl_reg = in_be32(&intr->ctrl);
ctrl_reg &= ~(0x3 << (22 - (l2irq * 2)));
ctrl_reg |= (type << (22 - (l2irq * 2)));
out_be32(&intr->ctrl, ctrl_reg);
+ __set_irq_handler_unlocked(virq, handler);
+
return 0;
}
@@ -247,6 +230,11 @@
/*
* Main interrupt irq_chip
*/
+static int mpc52xx_null_set_type(unsigned int virq, unsigned int flow_type)
+{
+ return 0; /* Do nothing so that the sense mask will get updated */
+}
+
static void mpc52xx_main_mask(unsigned int virq)
{
int irq;
@@ -255,8 +243,6 @@
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
- pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
-
io_be_setbit(&intr->main_mask, 16 - l2irq);
}
@@ -268,8 +254,6 @@
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
- pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
-
io_be_clrbit(&intr->main_mask, 16 - l2irq);
}
@@ -278,6 +262,7 @@
.mask = mpc52xx_main_mask,
.mask_ack = mpc52xx_main_mask,
.unmask = mpc52xx_main_unmask,
+ .set_type = mpc52xx_null_set_type,
};
/*
@@ -291,8 +276,6 @@
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
- pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
-
io_be_setbit(&intr->per_mask, 31 - l2irq);
}
@@ -304,8 +287,6 @@
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
- pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
-
io_be_clrbit(&intr->per_mask, 31 - l2irq);
}
@@ -314,6 +295,7 @@
.mask = mpc52xx_periph_mask,
.mask_ack = mpc52xx_periph_mask,
.unmask = mpc52xx_periph_unmask,
+ .set_type = mpc52xx_null_set_type,
};
/*
@@ -327,8 +309,6 @@
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
- pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
-
io_be_setbit(&sdma->IntMask, l2irq);
}
@@ -340,8 +320,6 @@
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
- pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
-
io_be_clrbit(&sdma->IntMask, l2irq);
}
@@ -353,8 +331,6 @@
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
- pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
-
out_be32(&sdma->IntPend, 1 << l2irq);
}
@@ -363,9 +339,19 @@
.mask = mpc52xx_sdma_mask,
.unmask = mpc52xx_sdma_unmask,
.ack = mpc52xx_sdma_ack,
+ .set_type = mpc52xx_null_set_type,
};
/**
+ * mpc52xx_is_extirq - Returns true if hwirq number is for an external IRQ
+ */
+static int mpc52xx_is_extirq(int l1, int l2)
+{
+ return ((l1 == 0) && (l2 == 0)) ||
+ ((l1 == 1) && (l2 >= 1) && (l2 <= 3));
+}
+
+/**
* mpc52xx_irqhost_xlate - translate virq# from device tree interrupts property
*/
static int mpc52xx_irqhost_xlate(struct irq_host *h, struct device_node *ct,
@@ -383,38 +369,23 @@
intrvect_l1 = (int)intspec[0];
intrvect_l2 = (int)intspec[1];
- intrvect_type = (int)intspec[2];
+ intrvect_type = (int)intspec[2] & 0x3;
intrvect_linux = (intrvect_l1 << MPC52xx_IRQ_L1_OFFSET) &
MPC52xx_IRQ_L1_MASK;
intrvect_linux |= intrvect_l2 & MPC52xx_IRQ_L2_MASK;
+ *out_hwirq = intrvect_linux;
+ *out_flags = IRQ_TYPE_LEVEL_LOW;
+ if (mpc52xx_is_extirq(intrvect_l1, intrvect_l2))
+ *out_flags = mpc52xx_map_senses[intrvect_type];
+
pr_debug("return %x, l1=%d, l2=%d\n", intrvect_linux, intrvect_l1,
intrvect_l2);
-
- *out_hwirq = intrvect_linux;
- *out_flags = mpc52xx_map_senses[intrvect_type];
-
return 0;
}
/**
- * mpc52xx_irqx_gettype - determine the IRQ sense type (level/edge)
- *
- * Only external IRQs need this.
- */
-static int mpc52xx_irqx_gettype(int irq)
-{
- int type;
- u32 ctrl_reg;
-
- ctrl_reg = in_be32(&intr->ctrl);
- type = (ctrl_reg >> (22 - irq * 2)) & 0x3;
-
- return mpc52xx_map_senses[type];
-}
-
-/**
* mpc52xx_irqhost_map - Hook to map from virq to an irq_chip structure
*/
static int mpc52xx_irqhost_map(struct irq_host *h, unsigned int virq,
@@ -422,68 +393,46 @@
{
int l1irq;
int l2irq;
- struct irq_chip *good_irqchip;
- void *good_handle;
+ struct irq_chip *irqchip;
+ void *hndlr;
int type;
+ u32 reg;
l1irq = (irq & MPC52xx_IRQ_L1_MASK) >> MPC52xx_IRQ_L1_OFFSET;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
/*
- * Most of ours IRQs will be level low
- * Only external IRQs on some platform may be others
+ * External IRQs are handled differently by the hardware so they are
+ * handled by a dedicated irq_chip structure.
*/
- type = IRQ_TYPE_LEVEL_LOW;
+ if (mpc52xx_is_extirq(l1irq, l2irq)) {
+ reg = in_be32(&intr->ctrl);
+ type = mpc52xx_map_senses[(reg >> (22 - l2irq * 2)) & 0x3];
+ if ((type == IRQ_TYPE_EDGE_FALLING) ||
+ (type == IRQ_TYPE_EDGE_RISING))
+ hndlr = handle_edge_irq;
+ else
+ hndlr = handle_level_irq;
+ set_irq_chip_and_handler(virq, &mpc52xx_extirq_irqchip, hndlr);
+ pr_debug("%s: External IRQ%i virq=%x, hw=%x. type=%x\n",
+ __func__, l2irq, virq, (int)irq, type);
+ return 0;
+ }
+
+ /* It is an internal SOC irq. Choose the correct irq_chip */
switch (l1irq) {
- case MPC52xx_IRQ_L1_CRIT:
- pr_debug("%s: Critical. l2=%x\n", __func__, l2irq);
-
- BUG_ON(l2irq != 0);
-
- type = mpc52xx_irqx_gettype(l2irq);
- good_irqchip = &mpc52xx_extirq_irqchip;
- break;
-
- case MPC52xx_IRQ_L1_MAIN:
- pr_debug("%s: Main IRQ[1-3] l2=%x\n", __func__, l2irq);
-
- if ((l2irq >= 1) && (l2irq <= 3)) {
- type = mpc52xx_irqx_gettype(l2irq);
- good_irqchip = &mpc52xx_extirq_irqchip;
- } else {
- good_irqchip = &mpc52xx_main_irqchip;
- }
- break;
-
- case MPC52xx_IRQ_L1_PERP:
- pr_debug("%s: Peripherals. l2=%x\n", __func__, l2irq);
- good_irqchip = &mpc52xx_periph_irqchip;
- break;
-
- case MPC52xx_IRQ_L1_SDMA:
- pr_debug("%s: SDMA. l2=%x\n", __func__, l2irq);
- good_irqchip = &mpc52xx_sdma_irqchip;
- break;
-
+ case MPC52xx_IRQ_L1_MAIN: irqchip = &mpc52xx_main_irqchip; break;
+ case MPC52xx_IRQ_L1_PERP: irqchip = &mpc52xx_periph_irqchip; break;
+ case MPC52xx_IRQ_L1_SDMA: irqchip = &mpc52xx_sdma_irqchip; break;
default:
- pr_err("%s: invalid virq requested (0x%x)\n", __func__, virq);
+ pr_err("%s: invalid irq: virq=%i, l1=%i, l2=%i\n",
+ __func__, virq, l1irq, l2irq);
return -EINVAL;
}
- switch (type) {
- case IRQ_TYPE_EDGE_FALLING:
- case IRQ_TYPE_EDGE_RISING:
- good_handle = handle_edge_irq;
- break;
- default:
- good_handle = handle_level_irq;
- }
-
- set_irq_chip_and_handler(virq, good_irqchip, good_handle);
-
- pr_debug("%s: virq=%x, hw=%x. type=%x\n", __func__, virq,
- (int)irq, type);
+ set_irq_chip_and_handler(virq, irqchip, handle_level_irq);
+ pr_debug("%s: virq=%x, l1=%i, l2=%i\n", __func__, virq, l1irq, l2irq);
return 0;
}
@@ -522,6 +471,8 @@
panic(__FILE__ ": find_and_map failed on 'mpc5200-bestcomm'. "
"Check node !");
+ pr_debug("MPC5200 IRQ controller mapped to 0x%p\n", intr);
+
/* Disable all interrupt sources. */
out_be32(&sdma->IntPend, 0xffffffff); /* 1 means clear pending */
out_be32(&sdma->IntMask, 0xffffffff); /* 1 means disabled */
@@ -613,8 +564,5 @@
}
}
- pr_debug("%s: irq=%x. virq=%d\n", __func__, irq,
- irq_linear_revmap(mpc52xx_irqhost, irq));
-
return irq_linear_revmap(mpc52xx_irqhost, irq);
}
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 30f008b..7c7df400 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -1,6 +1,6 @@
menuconfig PPC_82xx
bool "82xx-based boards (PQ II)"
- depends on 6xx && PPC_MULTIPLATFORM
+ depends on 6xx
if PPC_82xx
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 83c664a..437d29a 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -1,6 +1,6 @@
menuconfig PPC_83xx
bool "83xx-based boards"
- depends on 6xx && PPC_MULTIPLATFORM
+ depends on 6xx
select PPC_UDBG_16550
select PPC_PCI_CHOICE
select FSL_PCI if PCI
diff --git a/arch/powerpc/platforms/83xx/asp834x.c b/arch/powerpc/platforms/83xx/asp834x.c
index bb30d67..aa0d84d 100644
--- a/arch/powerpc/platforms/83xx/asp834x.c
+++ b/arch/powerpc/platforms/83xx/asp834x.c
@@ -58,6 +58,7 @@
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index 91a2c80..0b4f883 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -38,6 +38,8 @@
#ifdef CONFIG_PCI
for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
mpc83xx_add_bridge(np);
+ for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
+ mpc83xx_add_bridge(np);
#endif
mpc831x_usb_cfg();
}
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 76092d3..81e44fa 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -42,6 +42,7 @@
static struct of_device_id __initdata mpc834x_itx_ids[] = {
{ .compatible = "fsl,pq2pro-localbus", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index fc3f2ed..d0a634b 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -112,6 +112,7 @@
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 530ef99..51df7e75 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -84,14 +84,10 @@
ppc_md.progress("mpc837x_mds_setup_arch()", 0);
#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") {
- if (!of_device_is_available(np)) {
- pr_warning("%s: disabled by the firmware.\n",
- np->full_name);
- continue;
- }
+ for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
mpc83xx_add_bridge(np);
- }
+ for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
+ mpc83xx_add_bridge(np);
#endif
mpc837xmds_usb_cfg();
}
@@ -100,6 +96,7 @@
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 1d09654..76f3b32 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -38,6 +38,8 @@
#ifdef CONFIG_PCI
for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
mpc83xx_add_bridge(np);
+ for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
+ mpc83xx_add_bridge(np);
#endif
mpc837x_usb_cfg();
}
@@ -46,6 +48,7 @@
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index 156c4e2..49023db 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -84,6 +84,7 @@
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
index cc99c28..11e1fac 100644
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -14,6 +14,7 @@
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/errno.h>
+#include <linux/of.h>
#include <asm/io.h>
#include <asm/prom.h>
@@ -210,7 +211,7 @@
int ret = 0;
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
- if (!np)
+ if (!np || !of_device_is_available(np))
return -ENODEV;
prop = of_get_property(np, "phy_type", NULL);
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index b79dc71..7f066ad 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -51,6 +51,12 @@
help
This option enables support for the MPC85xx DS (MPC8544 DS) board
+config SOCRATES
+ bool "Socrates"
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the Socrates board.
+
config KSI8560
bool "Emerson KSI8560"
select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index f0798c0..a857b35 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -13,4 +13,5 @@
obj-$(CONFIG_TQM85xx) += tqm85xx.o
obj-$(CONFIG_SBC8560) += sbc8560.o
obj-$(CONFIG_SBC8548) += sbc8548.o
+obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
obj-$(CONFIG_KSI8560) += ksi8560.o
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
index 81cee7b..f4d36b5 100644
--- a/arch/powerpc/platforms/85xx/ksi8560.c
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -106,8 +106,6 @@
cpm2_pic_init(np);
of_node_put(np);
set_irq_chained_handler(irq, cpm2_cascade);
-
- setup_irq(0, NULL);
#endif
}
@@ -221,6 +219,7 @@
{ .type = "simple-bus", },
{ .name = "cpm", },
{ .name = "localbus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 1bf5aef..63efca2 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -92,6 +92,7 @@
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 21f0090..9438a892 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -226,6 +226,7 @@
{ .name = "cpm", },
{ .name = "localbus", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index aeb6a5b..0a9e491 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -336,6 +336,7 @@
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 7326d90..de66de7 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -204,6 +204,7 @@
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 658a36f..7dd0290 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -265,6 +265,7 @@
{ .compatible = "simple-bus", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
index 7ec77ce..ecdd8c0 100644
--- a/arch/powerpc/platforms/85xx/sbc8548.c
+++ b/arch/powerpc/platforms/85xx/sbc8548.c
@@ -154,6 +154,7 @@
{ .name = "soc", },
{ .type = "soc", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index 472f254..cc27807 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -213,6 +213,7 @@
{ .name = "cpm", },
{ .name = "localbus", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 79a0df1..cc0b0db 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -21,6 +21,7 @@
#include <asm/page.h>
#include <asm/mpic.h>
#include <asm/cacheflush.h>
+#include <asm/dbell.h>
#include <sysdev/fsl_soc.h>
@@ -80,10 +81,8 @@
}
static void __init
-smp_85xx_setup_cpu(int cpu_nr)
+smp_85xx_basic_setup(int cpu_nr)
{
- mpic_setup_this_cpu();
-
/* Clear any pending timer interrupts */
mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
@@ -91,15 +90,43 @@
mtspr(SPRN_TCR, TCR_DIE);
}
+static void __init
+smp_85xx_setup_cpu(int cpu_nr)
+{
+ mpic_setup_this_cpu();
+
+ smp_85xx_basic_setup(cpu_nr);
+}
+
struct smp_ops_t smp_85xx_ops = {
- .message_pass = smp_mpic_message_pass,
- .probe = smp_mpic_probe,
.kick_cpu = smp_85xx_kick_cpu,
- .setup_cpu = smp_85xx_setup_cpu,
};
-void __init
-mpc85xx_smp_init(void)
+static int __init smp_dummy_probe(void)
{
+ return NR_CPUS;
+}
+
+void __init mpc85xx_smp_init(void)
+{
+ struct device_node *np;
+
+ smp_85xx_ops.message_pass = NULL;
+
+ np = of_find_node_by_type(NULL, "open-pic");
+ if (np) {
+ smp_85xx_ops.probe = smp_mpic_probe;
+ smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu;
+ smp_85xx_ops.message_pass = smp_mpic_message_pass;
+ } else {
+ smp_85xx_ops.probe = smp_dummy_probe;
+ smp_85xx_ops.setup_cpu = smp_85xx_basic_setup;
+ }
+
+ if (cpu_has_feature(CPU_FTR_DBELL))
+ smp_85xx_ops.message_pass = smp_dbell_message_pass;
+
+ BUG_ON(!smp_85xx_ops.message_pass);
+
smp_ops = &smp_85xx_ops;
}
diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
new file mode 100644
index 0000000..d0e8443
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/socrates.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2008 Emcraft Systems
+ * Sergei Poselenov <sposelenov@emcraft.com>
+ *
+ * Based on MPC8560 ADS and arch/ppc tqm85xx ports
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ *
+ * Copyright (c) 2005-2006 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
+ *
+ * Based on original work by
+ * Kumar Gala <kumar.gala@freescale.com>
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpic.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "socrates_fpga_pic.h"
+
+static void __init socrates_pic_init(void)
+{
+ struct mpic *mpic;
+ struct resource r;
+ struct device_node *np;
+
+ np = of_find_node_by_type(NULL, "open-pic");
+ if (!np) {
+ printk(KERN_ERR "Could not find open-pic node\n");
+ return;
+ }
+
+ if (of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "Could not map mpic register space\n");
+ of_node_put(np);
+ return;
+ }
+
+ mpic = mpic_alloc(np, r.start,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ 0, 256, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+ of_node_put(np);
+
+ mpic_init(mpic);
+
+ np = of_find_compatible_node(NULL, NULL, "abb,socrates-fpga-pic");
+ if (!np) {
+ printk(KERN_ERR "Could not find socrates-fpga-pic node\n");
+ return;
+ }
+ socrates_fpga_pic_init(np);
+ of_node_put(np);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init socrates_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+ struct device_node *np;
+#endif
+
+ if (ppc_md.progress)
+ ppc_md.progress("socrates_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+ for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
+ fsl_add_bridge(np, 1);
+#endif
+}
+
+static struct of_device_id __initdata socrates_of_bus_ids[] = {
+ { .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
+ {},
+};
+
+static void __init socrates_init(void)
+{
+ of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init socrates_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "abb,socrates"))
+ return 1;
+
+ return 0;
+}
+
+define_machine(socrates) {
+ .name = "Socrates",
+ .probe = socrates_probe,
+ .setup_arch = socrates_setup_arch,
+ .init = socrates_init,
+ .init_IRQ = socrates_pic_init,
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
new file mode 100644
index 0000000..60edf63
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
@@ -0,0 +1,327 @@
+/*
+ * Copyright (C) 2008 Ilya Yanok, Emcraft Systems
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+
+/*
+ * The FPGA supports 9 interrupt sources, which can be routed to 3
+ * interrupt request lines of the MPIC. The line to be used can be
+ * specified through the third cell of FDT property "interrupts".
+ */
+
+#define SOCRATES_FPGA_NUM_IRQS 9
+
+#define FPGA_PIC_IRQCFG (0x0)
+#define FPGA_PIC_IRQMASK(n) (0x4 + 0x4 * (n))
+
+#define SOCRATES_FPGA_IRQ_MASK ((1 << SOCRATES_FPGA_NUM_IRQS) - 1)
+
+struct socrates_fpga_irq_info {
+ unsigned int irq_line;
+ int type;
+};
+
+/*
+ * Interrupt routing and type table
+ *
+ * IRQ_TYPE_NONE means the interrupt type is configurable,
+ * otherwise it's fixed to the specified value.
+ */
+static struct socrates_fpga_irq_info fpga_irqs[SOCRATES_FPGA_NUM_IRQS] = {
+ [0] = {0, IRQ_TYPE_NONE},
+ [1] = {0, IRQ_TYPE_LEVEL_HIGH},
+ [2] = {0, IRQ_TYPE_LEVEL_LOW},
+ [3] = {0, IRQ_TYPE_NONE},
+ [4] = {0, IRQ_TYPE_NONE},
+ [5] = {0, IRQ_TYPE_NONE},
+ [6] = {0, IRQ_TYPE_NONE},
+ [7] = {0, IRQ_TYPE_NONE},
+ [8] = {0, IRQ_TYPE_LEVEL_HIGH},
+};
+
+#define socrates_fpga_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
+
+static DEFINE_SPINLOCK(socrates_fpga_pic_lock);
+
+static void __iomem *socrates_fpga_pic_iobase;
+static struct irq_host *socrates_fpga_pic_irq_host;
+static unsigned int socrates_fpga_irqs[3];
+
+static inline uint32_t socrates_fpga_pic_read(int reg)
+{
+ return in_be32(socrates_fpga_pic_iobase + reg);
+}
+
+static inline void socrates_fpga_pic_write(int reg, uint32_t val)
+{
+ out_be32(socrates_fpga_pic_iobase + reg, val);
+}
+
+static inline unsigned int socrates_fpga_pic_get_irq(unsigned int irq)
+{
+ uint32_t cause;
+ unsigned long flags;
+ int i;
+
+ /* Check irq line routed to the MPIC */
+ for (i = 0; i < 3; i++) {
+ if (irq == socrates_fpga_irqs[i])
+ break;
+ }
+ if (i == 3)
+ return NO_IRQ;
+
+ spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+ cause = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(i));
+ spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+ for (i = SOCRATES_FPGA_NUM_IRQS - 1; i >= 0; i--) {
+ if (cause >> (i + 16))
+ break;
+ }
+ return irq_linear_revmap(socrates_fpga_pic_irq_host,
+ (irq_hw_number_t)i);
+}
+
+void socrates_fpga_pic_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int cascade_irq;
+
+ /*
+ * See if we actually have an interrupt, call generic handling code if
+ * we do.
+ */
+ cascade_irq = socrates_fpga_pic_get_irq(irq);
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+ desc->chip->eoi(irq);
+
+}
+
+static void socrates_fpga_pic_ack(unsigned int virq)
+{
+ unsigned long flags;
+ unsigned int hwirq, irq_line;
+ uint32_t mask;
+
+ hwirq = socrates_fpga_irq_to_hw(virq);
+
+ irq_line = fpga_irqs[hwirq].irq_line;
+ spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+ mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
+ & SOCRATES_FPGA_IRQ_MASK;
+ mask |= (1 << (hwirq + 16));
+ socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
+ spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+}
+
+static void socrates_fpga_pic_mask(unsigned int virq)
+{
+ unsigned long flags;
+ unsigned int hwirq;
+ int irq_line;
+ u32 mask;
+
+ hwirq = socrates_fpga_irq_to_hw(virq);
+
+ irq_line = fpga_irqs[hwirq].irq_line;
+ spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+ mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
+ & SOCRATES_FPGA_IRQ_MASK;
+ mask &= ~(1 << hwirq);
+ socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
+ spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+}
+
+static void socrates_fpga_pic_mask_ack(unsigned int virq)
+{
+ unsigned long flags;
+ unsigned int hwirq;
+ int irq_line;
+ u32 mask;
+
+ hwirq = socrates_fpga_irq_to_hw(virq);
+
+ irq_line = fpga_irqs[hwirq].irq_line;
+ spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+ mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
+ & SOCRATES_FPGA_IRQ_MASK;
+ mask &= ~(1 << hwirq);
+ mask |= (1 << (hwirq + 16));
+ socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
+ spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+}
+
+static void socrates_fpga_pic_unmask(unsigned int virq)
+{
+ unsigned long flags;
+ unsigned int hwirq;
+ int irq_line;
+ u32 mask;
+
+ hwirq = socrates_fpga_irq_to_hw(virq);
+
+ irq_line = fpga_irqs[hwirq].irq_line;
+ spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+ mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
+ & SOCRATES_FPGA_IRQ_MASK;
+ mask |= (1 << hwirq);
+ socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
+ spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+}
+
+static void socrates_fpga_pic_eoi(unsigned int virq)
+{
+ unsigned long flags;
+ unsigned int hwirq;
+ int irq_line;
+ u32 mask;
+
+ hwirq = socrates_fpga_irq_to_hw(virq);
+
+ irq_line = fpga_irqs[hwirq].irq_line;
+ spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+ mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
+ & SOCRATES_FPGA_IRQ_MASK;
+ mask |= (1 << (hwirq + 16));
+ socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
+ spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+}
+
+static int socrates_fpga_pic_set_type(unsigned int virq,
+ unsigned int flow_type)
+{
+ unsigned long flags;
+ unsigned int hwirq;
+ int polarity;
+ u32 mask;
+
+ hwirq = socrates_fpga_irq_to_hw(virq);
+
+ if (fpga_irqs[hwirq].type != IRQ_TYPE_NONE)
+ return -EINVAL;
+
+ switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ polarity = 1;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ polarity = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+ spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+ mask = socrates_fpga_pic_read(FPGA_PIC_IRQCFG);
+ if (polarity)
+ mask |= (1 << hwirq);
+ else
+ mask &= ~(1 << hwirq);
+ socrates_fpga_pic_write(FPGA_PIC_IRQCFG, mask);
+ spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+ return 0;
+}
+
+static struct irq_chip socrates_fpga_pic_chip = {
+ .typename = " FPGA-PIC ",
+ .ack = socrates_fpga_pic_ack,
+ .mask = socrates_fpga_pic_mask,
+ .mask_ack = socrates_fpga_pic_mask_ack,
+ .unmask = socrates_fpga_pic_unmask,
+ .eoi = socrates_fpga_pic_eoi,
+ .set_type = socrates_fpga_pic_set_type,
+};
+
+static int socrates_fpga_pic_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ /* All interrupts are LEVEL sensitive */
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(virq, &socrates_fpga_pic_chip,
+ handle_fasteoi_irq);
+
+ return 0;
+}
+
+static int socrates_fpga_pic_host_xlate(struct irq_host *h,
+ struct device_node *ct, u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+ struct socrates_fpga_irq_info *fpga_irq = &fpga_irqs[intspec[0]];
+
+ *out_hwirq = intspec[0];
+ if (fpga_irq->type == IRQ_TYPE_NONE) {
+ /* type is configurable */
+ if (intspec[1] != IRQ_TYPE_LEVEL_LOW &&
+ intspec[1] != IRQ_TYPE_LEVEL_HIGH) {
+ pr_warning("FPGA PIC: invalid irq type, "
+ "setting default active low\n");
+ *out_flags = IRQ_TYPE_LEVEL_LOW;
+ } else {
+ *out_flags = intspec[1];
+ }
+ } else {
+ /* type is fixed */
+ *out_flags = fpga_irq->type;
+ }
+
+ /* Use specified interrupt routing */
+ if (intspec[2] <= 2)
+ fpga_irq->irq_line = intspec[2];
+ else
+ pr_warning("FPGA PIC: invalid irq routing\n");
+
+ return 0;
+}
+
+static struct irq_host_ops socrates_fpga_pic_host_ops = {
+ .map = socrates_fpga_pic_host_map,
+ .xlate = socrates_fpga_pic_host_xlate,
+};
+
+void socrates_fpga_pic_init(struct device_node *pic)
+{
+ unsigned long flags;
+ int i;
+
+ /* Setup an irq_host structure */
+ socrates_fpga_pic_irq_host = irq_alloc_host(pic, IRQ_HOST_MAP_LINEAR,
+ SOCRATES_FPGA_NUM_IRQS, &socrates_fpga_pic_host_ops,
+ SOCRATES_FPGA_NUM_IRQS);
+ if (socrates_fpga_pic_irq_host == NULL) {
+ pr_err("FPGA PIC: Unable to allocate host\n");
+ return;
+ }
+
+ for (i = 0; i < 3; i++) {
+ socrates_fpga_irqs[i] = irq_of_parse_and_map(pic, i);
+ if (socrates_fpga_irqs[i] == NO_IRQ) {
+ pr_warning("FPGA PIC: can't get irq%d.\n", i);
+ continue;
+ }
+ set_irq_chained_handler(socrates_fpga_irqs[i],
+ socrates_fpga_pic_cascade);
+ }
+
+ socrates_fpga_pic_iobase = of_iomap(pic, 0);
+
+ spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+ socrates_fpga_pic_write(FPGA_PIC_IRQMASK(0),
+ SOCRATES_FPGA_IRQ_MASK << 16);
+ socrates_fpga_pic_write(FPGA_PIC_IRQMASK(1),
+ SOCRATES_FPGA_IRQ_MASK << 16);
+ socrates_fpga_pic_write(FPGA_PIC_IRQMASK(2),
+ SOCRATES_FPGA_IRQ_MASK << 16);
+ spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+
+ pr_info("FPGA PIC: Setting up Socrates FPGA PIC\n");
+}
diff --git a/arch/powerpc/platforms/85xx/socrates_fpga_pic.h b/arch/powerpc/platforms/85xx/socrates_fpga_pic.h
new file mode 100644
index 0000000..21d7d8e
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/socrates_fpga_pic.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2008 Ilya Yanok, Emcraft Systems
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef SOCRATES_FPGA_PIC_H
+#define SOCRATES_FPGA_PIC_H
+
+void socrates_fpga_pic_init(struct device_node *pic);
+
+#endif
diff --git a/arch/powerpc/platforms/85xx/stx_gp3.c b/arch/powerpc/platforms/85xx/stx_gp3.c
index 0cca8f5..f559918 100644
--- a/arch/powerpc/platforms/85xx/stx_gp3.c
+++ b/arch/powerpc/platforms/85xx/stx_gp3.c
@@ -145,6 +145,7 @@
static struct of_device_id __initdata of_bus_ids[] = {
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c
index 2933a8e..5b0ab99 100644
--- a/arch/powerpc/platforms/85xx/tqm85xx.c
+++ b/arch/powerpc/platforms/85xx/tqm85xx.c
@@ -153,6 +153,7 @@
static struct of_device_id __initdata of_bus_ids[] = {
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 8e56939..fdaf4dd 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -1,7 +1,7 @@
config PPC_86xx
menuconfig PPC_86xx
bool "86xx-based boards"
- depends on 6xx && PPC_MULTIPLATFORM
+ depends on 6xx
select FSL_SOC
select ALTIVEC
help
@@ -31,6 +31,22 @@
help
This option enables support for the MPC8610 HPCD board.
+config GEF_PPC9A
+ bool "GE Fanuc PPC9A"
+ select DEFAULT_UIMAGE
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ This option enables support for GE Fanuc's PPC9A.
+
+config GEF_SBC310
+ bool "GE Fanuc SBC310"
+ select DEFAULT_UIMAGE
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ This option enables support for GE Fanuc's SBC310.
+
config GEF_SBC610
bool "GE Fanuc SBC610"
select DEFAULT_UIMAGE
@@ -48,7 +64,7 @@
select FSL_PCI if PCI
select PPC_UDBG_16550
select MPIC
- default y if MPC8641_HPCN || SBC8641D || GEF_SBC610
+ default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
config MPC8610
bool
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 31e540c..4b0d7b1 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -9,3 +9,5 @@
obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o
gef-gpio-$(CONFIG_GPIOLIB) += gef_gpio.o
obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o gef_pic.o $(gef-gpio-y)
+obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o gef_pic.o $(gef-gpio-y)
+obj-$(CONFIG_GEF_PPC9A) += gef_ppc9a.o gef_pic.o $(gef-gpio-y)
diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c
index 85b2800..b2ea887 100644
--- a/arch/powerpc/platforms/86xx/gef_gpio.c
+++ b/arch/powerpc/platforms/86xx/gef_gpio.c
@@ -37,8 +37,6 @@
#define GEF_GPIO_OVERRUN 0x1C
#define GEF_GPIO_MODE 0x20
-#define NUM_GPIO 19
-
static void _gef_gpio_set(void __iomem *reg, unsigned int offset, int value)
{
unsigned int data;
@@ -103,10 +101,10 @@
static int __init gef_gpio_init(void)
{
struct device_node *np;
+ int retval;
+ struct of_mm_gpio_chip *gef_gpio_chip;
for_each_compatible_node(np, NULL, "gef,sbc610-gpio") {
- int retval;
- struct of_mm_gpio_chip *gef_gpio_chip;
pr_debug("%s: Initialising GEF GPIO\n", np->full_name);
@@ -120,7 +118,35 @@
/* Setup pointers to chip functions */
gef_gpio_chip->of_gc.gpio_cells = 2;
- gef_gpio_chip->of_gc.gc.ngpio = NUM_GPIO;
+ gef_gpio_chip->of_gc.gc.ngpio = 19;
+ gef_gpio_chip->of_gc.gc.direction_input = gef_gpio_dir_in;
+ gef_gpio_chip->of_gc.gc.direction_output = gef_gpio_dir_out;
+ gef_gpio_chip->of_gc.gc.get = gef_gpio_get;
+ gef_gpio_chip->of_gc.gc.set = gef_gpio_set;
+
+ /* This function adds a memory mapped GPIO chip */
+ retval = of_mm_gpiochip_add(np, gef_gpio_chip);
+ if (retval) {
+ kfree(gef_gpio_chip);
+ pr_err("%s: Unable to add GPIO\n", np->full_name);
+ }
+ }
+
+ for_each_compatible_node(np, NULL, "gef,sbc310-gpio") {
+
+ pr_debug("%s: Initialising GEF GPIO\n", np->full_name);
+
+ /* Allocate chip structure */
+ gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL);
+ if (!gef_gpio_chip) {
+ pr_err("%s: Unable to allocate structure\n",
+ np->full_name);
+ continue;
+ }
+
+ /* Setup pointers to chip functions */
+ gef_gpio_chip->of_gc.gpio_cells = 2;
+ gef_gpio_chip->of_gc.gc.ngpio = 6;
gef_gpio_chip->of_gc.gc.direction_input = gef_gpio_dir_in;
gef_gpio_chip->of_gc.gc.direction_output = gef_gpio_dir_out;
gef_gpio_chip->of_gc.gc.get = gef_gpio_get;
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
new file mode 100644
index 0000000..d791046
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -0,0 +1,224 @@
+/*
+ * GE Fanuc PPC9A board support
+ *
+ * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ *
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc86xx.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+#include "gef_pic.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG (fmt...) do { printk(KERN_ERR "PPC9A: " fmt); } while (0)
+#else
+#define DBG (fmt...) do { } while (0)
+#endif
+
+void __iomem *ppc9a_regs;
+
+static void __init gef_ppc9a_init_irq(void)
+{
+ struct device_node *cascade_node = NULL;
+
+ mpc86xx_init_irq();
+
+ /*
+ * There is a simple interrupt handler in the main FPGA, this needs
+ * to be cascaded into the MPIC
+ */
+ cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic-1.00");
+ if (!cascade_node) {
+ printk(KERN_WARNING "PPC9A: No FPGA PIC\n");
+ return;
+ }
+
+ gef_pic_init(cascade_node);
+ of_node_put(cascade_node);
+}
+
+static void __init gef_ppc9a_setup_arch(void)
+{
+ struct device_node *regs;
+#ifdef CONFIG_PCI
+ struct device_node *np;
+
+ for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
+ fsl_add_bridge(np, 1);
+ }
+#endif
+
+ printk(KERN_INFO "GE Fanuc Intelligent Platforms PPC9A 6U VME SBC\n");
+
+#ifdef CONFIG_SMP
+ mpc86xx_smp_init();
+#endif
+
+ /* Remap basic board registers */
+ regs = of_find_compatible_node(NULL, NULL, "gef,ppc9a-fpga-regs");
+ if (regs) {
+ ppc9a_regs = of_iomap(regs, 0);
+ if (ppc9a_regs == NULL)
+ printk(KERN_WARNING "Unable to map board registers\n");
+ of_node_put(regs);
+ }
+}
+
+/* Return the PCB revision */
+static unsigned int gef_ppc9a_get_pcb_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread32(ppc9a_regs);
+ return (reg >> 8) & 0xff;
+}
+
+/* Return the board (software) revision */
+static unsigned int gef_ppc9a_get_board_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread32(ppc9a_regs);
+ return (reg >> 16) & 0xff;
+}
+
+/* Return the FPGA revision */
+static unsigned int gef_ppc9a_get_fpga_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread32(ppc9a_regs);
+ return (reg >> 24) & 0xf;
+}
+
+static void gef_ppc9a_show_cpuinfo(struct seq_file *m)
+{
+ uint svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+
+ seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(),
+ ('A' + gef_ppc9a_get_board_rev() - 1));
+ seq_printf(m, "FPGA Revision\t: %u\n", gef_ppc9a_get_fpga_rev());
+
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+}
+
+static void __init gef_ppc9a_nec_fixup(struct pci_dev *pdev)
+{
+ unsigned int val;
+
+ /* Do not do the fixup on other platforms! */
+ if (!machine_is(gef_ppc9a))
+ return;
+
+ printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
+
+ /* Ensure ports 1, 2, 3, 4 & 5 are enabled */
+ pci_read_config_dword(pdev, 0xe0, &val);
+ pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5);
+
+ /* System clock is 48-MHz Oscillator and EHCI Enabled. */
+ pci_write_config_dword(pdev, 0xe4, 1 << 5);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+ gef_ppc9a_nec_fixup);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ *
+ * This function is called to determine whether the BSP is compatible with the
+ * supplied device-tree, which is assumed to be the correct one for the actual
+ * board. It is expected thati, in the future, a kernel may support multiple
+ * boards.
+ */
+static int __init gef_ppc9a_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "gef,ppc9a"))
+ return 1;
+
+ return 0;
+}
+
+static long __init mpc86xx_time_init(void)
+{
+ unsigned int temp;
+
+ /* Set the time base to zero */
+ mtspr(SPRN_TBWL, 0);
+ mtspr(SPRN_TBWU, 0);
+
+ temp = mfspr(SPRN_HID0);
+ temp |= HID0_TBEN;
+ mtspr(SPRN_HID0, temp);
+ asm volatile("isync");
+
+ return 0;
+}
+
+static __initdata struct of_device_id of_bus_ids[] = {
+ { .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ printk(KERN_DEBUG "Probe platform devices\n");
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(gef_ppc9a, declare_of_platform_devices);
+
+define_machine(gef_ppc9a) {
+ .name = "GE Fanuc PPC9A",
+ .probe = gef_ppc9a_probe,
+ .setup_arch = gef_ppc9a_setup_arch,
+ .init_IRQ = gef_ppc9a_init_irq,
+ .show_cpuinfo = gef_ppc9a_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .time_init = mpc86xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+};
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
new file mode 100644
index 0000000..af14f85
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -0,0 +1,235 @@
+/*
+ * GE Fanuc SBC310 board support
+ *
+ * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ *
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc86xx.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+#include "gef_pic.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG (fmt...) do { printk(KERN_ERR "SBC310: " fmt); } while (0)
+#else
+#define DBG (fmt...) do { } while (0)
+#endif
+
+void __iomem *sbc310_regs;
+
+static void __init gef_sbc310_init_irq(void)
+{
+ struct device_node *cascade_node = NULL;
+
+ mpc86xx_init_irq();
+
+ /*
+ * There is a simple interrupt handler in the main FPGA, this needs
+ * to be cascaded into the MPIC
+ */
+ cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic");
+ if (!cascade_node) {
+ printk(KERN_WARNING "SBC310: No FPGA PIC\n");
+ return;
+ }
+
+ gef_pic_init(cascade_node);
+ of_node_put(cascade_node);
+}
+
+static void __init gef_sbc310_setup_arch(void)
+{
+ struct device_node *regs;
+#ifdef CONFIG_PCI
+ struct device_node *np;
+
+ for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
+ fsl_add_bridge(np, 1);
+ }
+#endif
+
+ printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC310 6U VPX SBC\n");
+
+#ifdef CONFIG_SMP
+ mpc86xx_smp_init();
+#endif
+
+ /* Remap basic board registers */
+ regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
+ if (regs) {
+ sbc310_regs = of_iomap(regs, 0);
+ if (sbc310_regs == NULL)
+ printk(KERN_WARNING "Unable to map board registers\n");
+ of_node_put(regs);
+ }
+}
+
+/* Return the PCB revision */
+static unsigned int gef_sbc310_get_board_id(void)
+{
+ unsigned int reg;
+
+ reg = ioread32(sbc310_regs);
+ return reg & 0xff;
+}
+
+/* Return the PCB revision */
+static unsigned int gef_sbc310_get_pcb_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread32(sbc310_regs);
+ return (reg >> 8) & 0xff;
+}
+
+/* Return the board (software) revision */
+static unsigned int gef_sbc310_get_board_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread32(sbc310_regs);
+ return (reg >> 16) & 0xff;
+}
+
+/* Return the FPGA revision */
+static unsigned int gef_sbc310_get_fpga_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread32(sbc310_regs);
+ return (reg >> 24) & 0xf;
+}
+
+static void gef_sbc310_show_cpuinfo(struct seq_file *m)
+{
+ uint svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+
+ seq_printf(m, "Board ID\t: 0x%2.2x\n", gef_sbc310_get_board_id());
+ seq_printf(m, "Revision\t: %u%c\n", gef_sbc310_get_pcb_rev(),
+ ('A' + gef_sbc310_get_board_rev() - 1));
+ seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc310_get_fpga_rev());
+
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+}
+
+static void __init gef_sbc310_nec_fixup(struct pci_dev *pdev)
+{
+ unsigned int val;
+
+ /* Do not do the fixup on other platforms! */
+ if (!machine_is(gef_sbc310))
+ return;
+
+ printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
+
+ /* Ensure only ports 1 & 2 are enabled */
+ pci_read_config_dword(pdev, 0xe0, &val);
+ pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x2);
+
+ /* System clock is 48-MHz Oscillator and EHCI Enabled. */
+ pci_write_config_dword(pdev, 0xe4, 1 << 5);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+ gef_sbc310_nec_fixup);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ *
+ * This function is called to determine whether the BSP is compatible with the
+ * supplied device-tree, which is assumed to be the correct one for the actual
+ * board. It is expected thati, in the future, a kernel may support multiple
+ * boards.
+ */
+static int __init gef_sbc310_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "gef,sbc310"))
+ return 1;
+
+ return 0;
+}
+
+static long __init mpc86xx_time_init(void)
+{
+ unsigned int temp;
+
+ /* Set the time base to zero */
+ mtspr(SPRN_TBWL, 0);
+ mtspr(SPRN_TBWU, 0);
+
+ temp = mfspr(SPRN_HID0);
+ temp |= HID0_TBEN;
+ mtspr(SPRN_HID0, temp);
+ asm volatile("isync");
+
+ return 0;
+}
+
+static __initdata struct of_device_id of_bus_ids[] = {
+ { .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ printk(KERN_DEBUG "Probe platform devices\n");
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(gef_sbc310, declare_of_platform_devices);
+
+define_machine(gef_sbc310) {
+ .name = "GE Fanuc SBC310",
+ .probe = gef_sbc310_probe,
+ .setup_arch = gef_sbc310_setup_arch,
+ .init_IRQ = gef_sbc310_init_irq,
+ .show_cpuinfo = gef_sbc310_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .time_init = mpc86xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+};
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index d6b772b..ea23606 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -194,6 +194,7 @@
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index e8d54ac..3f49a6f 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -46,6 +46,7 @@
static struct of_device_id __initdata mpc8610_ids[] = {
{ .compatible = "fsl,mpc8610-immr", },
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{}
};
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 27e0e68..c4ec49b 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -148,6 +148,7 @@
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
{ .compatible = "fsl,rapidio-delta", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
index 5fd7ed4..2886a36f 100644
--- a/arch/powerpc/platforms/86xx/sbc8641d.c
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -103,6 +103,7 @@
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 200b9cb..ffa2a9f 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -1,14 +1,5 @@
menu "Platform support"
-config PPC_MULTIPLATFORM
- bool
- depends on PPC64 || 6xx
- default y
-
-config CLASSIC32
- def_bool y
- depends on 6xx && PPC_MULTIPLATFORM
-
source "arch/powerpc/platforms/pseries/Kconfig"
source "arch/powerpc/platforms/iseries/Kconfig"
source "arch/powerpc/platforms/chrp/Kconfig"
@@ -28,15 +19,28 @@
source "arch/powerpc/platforms/embedded6xx/Kconfig"
source "arch/powerpc/platforms/44x/Kconfig"
source "arch/powerpc/platforms/40x/Kconfig"
+source "arch/powerpc/platforms/amigaone/Kconfig"
config PPC_NATIVE
bool
- depends on PPC_MULTIPLATFORM
+ depends on 6xx || PPC64
help
Support for running natively on the hardware, i.e. without
a hypervisor. This option is not user-selectable but should
be selected by all platforms that need it.
+config PPC_OF_BOOT_TRAMPOLINE
+ bool "Support booting from Open Firmware or yaboot"
+ depends on 6xx || PPC64
+ default y
+ help
+ Support from booting from Open Firmware or yaboot using an
+ Open Firmware client interface. This enables the kernel to
+ communicate with open firmware to retrieve system informations
+ such as the device tree.
+
+ In case of doubt, say Y
+
config UDBG_RTAS_CONSOLE
bool "RTAS based debug console"
depends on PPC_RTAS
@@ -70,7 +74,7 @@
config U3_DART
bool
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64
default n
config PPC_RTAS
@@ -91,15 +95,6 @@
tristate "Firmware flash interface"
depends on PPC64 && RTAS_PROC
-config PPC_PMI
- tristate "Support for PMI"
- depends on PPC_IBM_CELL_BLADE
- help
- PMI (Platform Management Interrupt) is a way to
- communicate with the BMC (Baseboard Management Controller).
- It is used in some IBM Cell blades.
- default m
-
config MMIO_NVRAM
bool
default n
@@ -196,7 +191,7 @@
config TAU
bool "On-chip CPU temperature sensor support"
- depends on CLASSIC32
+ depends on 6xx
help
G3 and G4 processors have an on-chip temperature sensor called the
'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
@@ -274,7 +269,7 @@
config AXON_RAM
tristate "Axon DDR2 memory device driver"
- depends on PPC_IBM_CELL_BLADE
+ depends on PPC_IBM_CELL_BLADE && BLOCK
default m
help
It registers one block device per Axon's DDR2 memory bank found
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index e868b5c..9da795e 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -57,9 +57,17 @@
endchoice
+# Until we have a choice of exclusive CPU types on 64-bit, we always
+# use PPC_BOOK3S. On 32-bit, this is equivalent to 6xx which is
+# "classic" MMU
+
+config PPC_BOOK3S
+ def_bool y
+ depends on PPC64 || 6xx
+
config POWER4_ONLY
bool "Optimize for POWER4"
- depends on PPC64
+ depends on PPC64 && PPC_BOOK3S
default n
---help---
Cause the compiler to optimize for POWER4/POWER5/PPC970 processors.
@@ -68,16 +76,16 @@
config POWER3
bool
- depends on PPC64
+ depends on PPC64 && PPC_BOOK3S
default y if !POWER4_ONLY
config POWER4
- depends on PPC64
+ depends on PPC64 && PPC_BOOK3S
def_bool y
config TUNE_CELL
bool "Optimize for Cell Broadband Engine"
- depends on PPC64
+ depends on PPC64 && PPC_BOOK3S
help
Cause the compiler to optimize for the PPE of the Cell Broadband
Engine. This will make the code run considerably faster on Cell
@@ -147,7 +155,7 @@
config ALTIVEC
bool "AltiVec Support"
- depends on CLASSIC32 || POWER4
+ depends on 6xx || POWER4
---help---
This option enables kernel support for the Altivec extensions to the
PowerPC processor. The kernel currently supports saving and restoring
@@ -210,6 +218,10 @@
def_bool y
depends on !PPC_STD_MMU
+config PPC_BOOK3E_MMU
+ def_bool y
+ depends on FSL_BOOKE
+
config PPC_MM_SLICES
bool
default y if HUGETLB_PAGE || (PPC_STD_MMU_64 && PPC_64K_PAGES)
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 8079e0b..f741919 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -19,3 +19,4 @@
obj-$(CONFIG_PPC_CELL) += cell/
obj-$(CONFIG_PPC_PS3) += ps3/
obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/
+obj-$(CONFIG_AMIGAONE) += amigaone/
diff --git a/arch/powerpc/platforms/amigaone/Kconfig b/arch/powerpc/platforms/amigaone/Kconfig
new file mode 100644
index 0000000..0224767
--- /dev/null
+++ b/arch/powerpc/platforms/amigaone/Kconfig
@@ -0,0 +1,18 @@
+config AMIGAONE
+ bool "Eyetech AmigaOne/MAI Teron"
+ depends on 6xx && BROKEN_ON_SMP
+ select PPC_I8259
+ select PPC_INDIRECT_PCI
+ select PPC_UDBG_16550
+ select PCI
+ select NOT_COHERENT_CACHE
+ select CHECK_CACHE_COHERENCY
+ select DEFAULT_UIMAGE
+ select PCSPKR_PLATFORM
+ help
+ Select AmigaOne for the following machines:
+ - AmigaOne SE/Teron CX (G3 only)
+ - AmigaOne XE/Teron PX
+ - uA1/Teron mini
+ More information is available at:
+ <http://amigaone-linux.sourceforge.net/>.
diff --git a/arch/powerpc/platforms/amigaone/Makefile b/arch/powerpc/platforms/amigaone/Makefile
new file mode 100644
index 0000000..e6885b3
--- /dev/null
+++ b/arch/powerpc/platforms/amigaone/Makefile
@@ -0,0 +1 @@
+obj-y += setup.o
diff --git a/arch/powerpc/platforms/amigaone/setup.c b/arch/powerpc/platforms/amigaone/setup.c
new file mode 100644
index 0000000..4430353
--- /dev/null
+++ b/arch/powerpc/platforms/amigaone/setup.c
@@ -0,0 +1,170 @@
+/*
+ * AmigaOne platform setup
+ *
+ * Copyright 2008 Gerhard Pircher (gerhard_pircher@gmx.net)
+ *
+ * Based on original amigaone_setup.c source code
+ * Copyright 2003 by Hans-Joerg Frieden and Thomas Frieden
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/seq_file.h>
+#include <linux/utsrelease.h>
+
+#include <asm/machdep.h>
+#include <asm/cputable.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/i8259.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+
+extern void __flush_disable_L1(void);
+
+void amigaone_show_cpuinfo(struct seq_file *m)
+{
+ seq_printf(m, "vendor\t\t: Eyetech Ltd.\n");
+}
+
+static int __init amigaone_add_bridge(struct device_node *dev)
+{
+ const u32 *cfg_addr, *cfg_data;
+ int len;
+ const int *bus_range;
+ struct pci_controller *hose;
+
+ printk(KERN_INFO "Adding PCI host bridge %s\n", dev->full_name);
+
+ cfg_addr = of_get_address(dev, 0, NULL, NULL);
+ cfg_data = of_get_address(dev, 1, NULL, NULL);
+ if ((cfg_addr == NULL) || (cfg_data == NULL))
+ return -ENODEV;
+
+ bus_range = of_get_property(dev, "bus-range", &len);
+ if ((bus_range == NULL) || (len < 2 * sizeof(int)))
+ printk(KERN_WARNING "Can't get bus-range for %s, assume"
+ " bus 0\n", dev->full_name);
+
+ hose = pcibios_alloc_controller(dev);
+ if (hose == NULL)
+ return -ENOMEM;
+
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ setup_indirect_pci(hose, cfg_addr[0], cfg_data[0], 0);
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ pci_process_bridge_OF_ranges(hose, dev, 1);
+
+ return 0;
+}
+
+void __init amigaone_setup_arch(void)
+{
+ struct device_node *np;
+ int phb = -ENODEV;
+
+ /* Lookup PCI host bridges. */
+ for_each_compatible_node(np, "pci", "mai-logic,articia-s")
+ phb = amigaone_add_bridge(np);
+
+ BUG_ON(phb != 0);
+
+ if (ppc_md.progress)
+ ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0);
+}
+
+void __init amigaone_init_IRQ(void)
+{
+ struct device_node *pic, *np = NULL;
+ const unsigned long *prop = NULL;
+ unsigned long int_ack = 0;
+
+ /* Search for ISA interrupt controller. */
+ pic = of_find_compatible_node(NULL, "interrupt-controller",
+ "pnpPNP,000");
+ BUG_ON(pic == NULL);
+
+ /* Look for interrupt acknowledge address in the PCI root node. */
+ np = of_find_compatible_node(NULL, "pci", "mai-logic,articia-s");
+ if (np) {
+ prop = of_get_property(np, "8259-interrupt-acknowledge", NULL);
+ if (prop)
+ int_ack = prop[0];
+ of_node_put(np);
+ }
+
+ if (int_ack == 0)
+ printk(KERN_WARNING "Cannot find PCI interrupt acknowledge"
+ " address, polling\n");
+
+ i8259_init(pic, int_ack);
+ ppc_md.get_irq = i8259_irq;
+ irq_set_default_host(i8259_get_host());
+}
+
+void __init amigaone_init(void)
+{
+ request_region(0x00, 0x20, "dma1");
+ request_region(0x40, 0x20, "timer");
+ request_region(0x80, 0x10, "dma page reg");
+ request_region(0xc0, 0x20, "dma2");
+}
+
+void amigaone_restart(char *cmd)
+{
+ local_irq_disable();
+
+ /* Flush and disable caches. */
+ __flush_disable_L1();
+
+ /* Set SRR0 to the reset vector and turn on MSR_IP. */
+ mtspr(SPRN_SRR0, 0xfff00100);
+ mtspr(SPRN_SRR1, MSR_IP);
+
+ /* Do an rfi to jump back to firmware. */
+ __asm__ __volatile__("rfi" : : : "memory");
+
+ /* Not reached. */
+ while (1);
+}
+
+static int __init amigaone_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "eyetech,amigaone")) {
+ /*
+ * Coherent memory access cause complete system lockup! Thus
+ * disable this CPU feature, even if the CPU needs it.
+ */
+ cur_cpu_spec->cpu_features &= ~CPU_FTR_NEED_COHERENT;
+
+ ISA_DMA_THRESHOLD = 0x00ffffff;
+ DMA_MODE_READ = 0x44;
+ DMA_MODE_WRITE = 0x48;
+
+ return 1;
+ }
+
+ return 0;
+}
+
+define_machine(amigaone) {
+ .name = "AmigaOne",
+ .probe = amigaone_probe,
+ .setup_arch = amigaone_setup_arch,
+ .init = amigaone_init,
+ .show_cpuinfo = amigaone_show_cpuinfo,
+ .init_IRQ = amigaone_init_IRQ,
+ .restart = amigaone_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 5cc3279..40e24c3 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -23,7 +23,7 @@
config PPC_IBM_CELL_BLADE
bool "IBM Cell Blade"
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64 && PPC_BOOK3S
select PPC_CELL_NATIVE
select MMIO_NVRAM
select PPC_UDBG_16550
@@ -31,7 +31,7 @@
config PPC_CELLEB
bool "Toshiba's Cell Reference Set 'Celleb' Architecture"
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64 && PPC_BOOK3S
select PPC_CELL_NATIVE
select HAS_TXX9_SERIAL
select PPC_UDBG_BEAT
@@ -40,9 +40,14 @@
config PPC_CELL_QPACE
bool "IBM Cell - QPACE"
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64 && PPC_BOOK3S
select PPC_CELL_COMMON
+config AXON_MSI
+ bool
+ depends on PPC_IBM_CELL_BLADE && PCI_MSI
+ default y
+
menu "Cell Broadband Engine options"
depends on PPC_CELL
@@ -98,7 +103,7 @@
config PPC_IBM_CELL_POWERBUTTON
tristate "IBM Cell Blade power button"
- depends on PPC_IBM_CELL_BLADE && PPC_PMI && INPUT_EVDEV
+ depends on PPC_IBM_CELL_BLADE && INPUT_EVDEV
default y
help
Support Powerbutton on IBM Cell blades.
@@ -118,9 +123,9 @@
For details, take a look at <file:Documentation/cpu-freq/>.
If you don't have such processor, say N
-config CBE_CPUFREQ_PMI
- tristate "CBE frequency scaling using PMI interface"
- depends on CBE_CPUFREQ && PPC_PMI && EXPERIMENTAL
+config CBE_CPUFREQ_PMI_ENABLE
+ bool "CBE frequency scaling using PMI interface"
+ depends on CBE_CPUFREQ && EXPERIMENTAL
default n
help
Select this, if you want to use the PMI interface
@@ -128,6 +133,20 @@
processor will not only be able to run at lower speed,
but also at lower core voltage.
+config CBE_CPUFREQ_PMI
+ tristate
+ depends on CBE_CPUFREQ_PMI_ENABLE
+ default CBE_CPUFREQ
+
+config PPC_PMI
+ tristate
+ default y
+ depends on CBE_CPUFREQ_PMI || PPC_IBM_CELL_POWERBUTTON
+ help
+ PMI (Platform Management Interrupt) is a way to
+ communicate with the BMC (Baseboard Management Controller).
+ It is used in some IBM Cell blades.
+
config CBE_CPUFREQ_SPU_GOVERNOR
tristate "CBE frequency scaling based on SPU usage"
depends on SPU_FS && CPU_FREQ
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index 43eccb2..83fafe9 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -28,7 +28,7 @@
$(spu-manage-y) \
spufs/
-obj-$(CONFIG_PCI_MSI) += axon_msi.o
+obj-$(CONFIG_AXON_MSI) += axon_msi.o
# qpace setup
obj-$(CONFIG_PPC_CELL_QPACE) += qpace_setup.o
diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/platforms/cell/io-workarounds.c
index 059cad6..5c1118e 100644
--- a/arch/powerpc/platforms/cell/io-workarounds.c
+++ b/arch/powerpc/platforms/cell/io-workarounds.c
@@ -131,10 +131,10 @@
};
static void __iomem *iowa_ioremap(phys_addr_t addr, unsigned long size,
- unsigned long flags)
+ unsigned long flags, void *caller)
{
struct iowa_bus *bus;
- void __iomem *res = __ioremap(addr, size, flags);
+ void __iomem *res = __ioremap_caller(addr, size, flags, caller);
int busno;
bus = iowa_pci_find(0, (unsigned long)addr);
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index ee5033e..5744527 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -74,7 +74,7 @@
#define IOC_IO_ExcpStat_V 0x8000000000000000ul
#define IOC_IO_ExcpStat_SPF_Mask 0x6000000000000000ul
#define IOC_IO_ExcpStat_SPF_S 0x6000000000000000ul
-#define IOC_IO_ExcpStat_SPF_P 0x4000000000000000ul
+#define IOC_IO_ExcpStat_SPF_P 0x2000000000000000ul
#define IOC_IO_ExcpStat_ADDR_Mask 0x00000007fffff000ul
#define IOC_IO_ExcpStat_RW_Mask 0x0000000000000800ul
#define IOC_IO_ExcpStat_IOID_Mask 0x00000000000007fful
@@ -247,17 +247,18 @@
static irqreturn_t ioc_interrupt(int irq, void *data)
{
- unsigned long stat;
+ unsigned long stat, spf;
struct cbe_iommu *iommu = data;
stat = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat);
+ spf = stat & IOC_IO_ExcpStat_SPF_Mask;
/* Might want to rate limit it */
printk(KERN_ERR "iommu: DMA exception 0x%016lx\n", stat);
printk(KERN_ERR " V=%d, SPF=[%c%c], RW=%s, IOID=0x%04x\n",
!!(stat & IOC_IO_ExcpStat_V),
- (stat & IOC_IO_ExcpStat_SPF_S) ? 'S' : ' ',
- (stat & IOC_IO_ExcpStat_SPF_P) ? 'P' : ' ',
+ (spf == IOC_IO_ExcpStat_SPF_S) ? 'S' : ' ',
+ (spf == IOC_IO_ExcpStat_SPF_P) ? 'P' : ' ',
(stat & IOC_IO_ExcpStat_RW_Mask) ? "Read" : "Write",
(unsigned int)(stat & IOC_IO_ExcpStat_IOID_Mask));
printk(KERN_ERR " page=0x%016lx\n",
diff --git a/arch/powerpc/platforms/cell/qpace_setup.c b/arch/powerpc/platforms/cell/qpace_setup.c
index be84e6a..c5ce02e 100644
--- a/arch/powerpc/platforms/cell/qpace_setup.c
+++ b/arch/powerpc/platforms/cell/qpace_setup.c
@@ -81,16 +81,6 @@
}
machine_subsys_initcall(qpace, qpace_publish_devices);
-extern int qpace_notify(struct device *dev)
-{
- /* set dma_ops for of_platform bus */
- if (dev->bus && dev->bus->name
- && !strcmp(dev->bus->name, "of_platform"))
- set_dma_ops(dev, &dma_direct_ops);
-
- return 0;
-}
-
static void __init qpace_setup_arch(void)
{
#ifdef CONFIG_SPU_BASE
@@ -115,9 +105,6 @@
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
-
- /* set notifier function */
- platform_notify = &qpace_notify;
}
static int __init qpace_probe(void)
@@ -141,6 +128,8 @@
.power_off = rtas_power_off,
.halt = rtas_halt,
.get_boot_time = rtas_get_boot_time,
+ .get_rtc_time = rtas_get_rtc_time,
+ .set_rtc_time = rtas_set_rtc_time,
.calibrate_decr = generic_calibrate_decr,
.progress = qpace_progress,
.init_IRQ = iic_init_IRQ,
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index e487ad6..9abd210 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -114,7 +114,7 @@
int nr = (NR_CPUS > 1) ? NR_CPUS : NR_CPUS + 1;
/* Global TLBIE broadcast required with SPEs. */
- __cpus_setall(&mm->cpu_vm_mask, nr);
+ bitmap_fill(cpumask_bits(mm_cpumask(mm)), nr);
}
void spu_associate_mm(struct spu *spu, struct mm_struct *mm)
diff --git a/arch/powerpc/platforms/cell/spu_fault.c b/arch/powerpc/platforms/cell/spu_fault.c
index c8b1cd4..95d8dad 100644
--- a/arch/powerpc/platforms/cell/spu_fault.c
+++ b/arch/powerpc/platforms/cell/spu_fault.c
@@ -39,60 +39,56 @@
unsigned long is_write;
int ret;
-#if 0
- if (!IS_VALID_EA(ea)) {
+ if (mm == NULL)
return -EFAULT;
- }
-#endif /* XXX */
- if (mm == NULL) {
+
+ if (mm->pgd == NULL)
return -EFAULT;
- }
- if (mm->pgd == NULL) {
- return -EFAULT;
- }
down_read(&mm->mmap_sem);
+ ret = -EFAULT;
vma = find_vma(mm, ea);
if (!vma)
- goto bad_area;
- if (vma->vm_start <= ea)
- goto good_area;
- if (!(vma->vm_flags & VM_GROWSDOWN))
- goto bad_area;
- if (expand_stack(vma, ea))
- goto bad_area;
-good_area:
+ goto out_unlock;
+
+ if (ea < vma->vm_start) {
+ if (!(vma->vm_flags & VM_GROWSDOWN))
+ goto out_unlock;
+ if (expand_stack(vma, ea))
+ goto out_unlock;
+ }
+
is_write = dsisr & MFC_DSISR_ACCESS_PUT;
if (is_write) {
if (!(vma->vm_flags & VM_WRITE))
- goto bad_area;
+ goto out_unlock;
} else {
if (dsisr & MFC_DSISR_ACCESS_DENIED)
- goto bad_area;
+ goto out_unlock;
if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
- goto bad_area;
+ goto out_unlock;
}
+
ret = 0;
*flt = handle_mm_fault(mm, vma, ea, is_write);
if (unlikely(*flt & VM_FAULT_ERROR)) {
if (*flt & VM_FAULT_OOM) {
ret = -ENOMEM;
- goto bad_area;
+ goto out_unlock;
} else if (*flt & VM_FAULT_SIGBUS) {
ret = -EFAULT;
- goto bad_area;
+ goto out_unlock;
}
BUG();
}
+
if (*flt & VM_FAULT_MAJOR)
current->maj_flt++;
else
current->min_flt++;
+
+out_unlock:
up_read(&mm->mmap_sem);
return ret;
-
-bad_area:
- up_read(&mm->mmap_sem);
- return -EFAULT;
}
EXPORT_SYMBOL_GPL(spu_handle_mm_fault);
diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c
index 6653ddb..db5398c 100644
--- a/arch/powerpc/platforms/cell/spufs/context.c
+++ b/arch/powerpc/platforms/cell/spufs/context.c
@@ -35,6 +35,8 @@
struct spu_context *alloc_spu_context(struct spu_gang *gang)
{
struct spu_context *ctx;
+ struct timespec ts;
+
ctx = kzalloc(sizeof *ctx, GFP_KERNEL);
if (!ctx)
goto out;
@@ -64,6 +66,8 @@
__spu_update_sched_info(ctx);
spu_set_timeslice(ctx);
ctx->stats.util_state = SPU_UTIL_IDLE_LOADED;
+ ktime_get_ts(&ts);
+ ctx->stats.tstamp = timespec_to_ns(&ts);
atomic_inc(&nr_spu_contexts);
goto out;
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 0da7f2b..d6a519e 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -568,16 +568,17 @@
struct spu_lscsa *lscsa = ctx->csa.lscsa;
int ret;
- size = min_t(ssize_t, sizeof lscsa->gprs - *pos, size);
- if (size <= 0)
+ if (*pos >= sizeof(lscsa->gprs))
return -EFBIG;
+
+ size = min_t(ssize_t, sizeof(lscsa->gprs) - *pos, size);
*pos += size;
ret = spu_acquire_saved(ctx);
if (ret)
return ret;
- ret = copy_from_user(lscsa->gprs + *pos - size,
+ ret = copy_from_user((char *)lscsa->gprs + *pos - size,
buffer, size) ? -EFAULT : size;
spu_release_saved(ctx);
@@ -623,10 +624,11 @@
struct spu_lscsa *lscsa = ctx->csa.lscsa;
int ret;
- size = min_t(ssize_t, sizeof(lscsa->fpcr) - *pos, size);
- if (size <= 0)
+ if (*pos >= sizeof(lscsa->fpcr))
return -EFBIG;
+ size = min_t(ssize_t, sizeof(lscsa->fpcr) - *pos, size);
+
ret = spu_acquire_saved(ctx);
if (ret)
return ret;
@@ -2665,7 +2667,7 @@
.release = single_release,
};
-struct spufs_tree_descr spufs_dir_contents[] = {
+const struct spufs_tree_descr spufs_dir_contents[] = {
{ "capabilities", &spufs_caps_fops, 0444, },
{ "mem", &spufs_mem_fops, 0666, LS_SIZE, },
{ "regs", &spufs_regs_fops, 0666, sizeof(struct spu_reg128[128]), },
@@ -2706,7 +2708,7 @@
{},
};
-struct spufs_tree_descr spufs_dir_nosched_contents[] = {
+const struct spufs_tree_descr spufs_dir_nosched_contents[] = {
{ "capabilities", &spufs_caps_fops, 0444, },
{ "mem", &spufs_mem_fops, 0666, LS_SIZE, },
{ "mbox", &spufs_mbox_fops, 0444, },
@@ -2731,12 +2733,12 @@
{},
};
-struct spufs_tree_descr spufs_dir_debug_contents[] = {
+const struct spufs_tree_descr spufs_dir_debug_contents[] = {
{ ".ctx", &spufs_ctx_fops, 0444, },
{},
};
-struct spufs_coredump_reader spufs_coredump_read[] = {
+const struct spufs_coredump_reader spufs_coredump_read[] = {
{ "regs", __spufs_regs_read, NULL, sizeof(struct spu_reg128[128])},
{ "fpcr", __spufs_fpcr_read, NULL, sizeof(struct spu_reg128) },
{ "lslr", NULL, spufs_lslr_get, 19 },
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index e309ef7..64f0685 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -186,8 +186,9 @@
return simple_rmdir(parent, dir);
}
-static int spufs_fill_dir(struct dentry *dir, struct spufs_tree_descr *files,
- int mode, struct spu_context *ctx)
+static int spufs_fill_dir(struct dentry *dir,
+ const struct spufs_tree_descr *files, int mode,
+ struct spu_context *ctx)
{
struct dentry *dentry, *tmp;
int ret;
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index c58bd36..4ddf769 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -117,6 +117,9 @@
cond_resched();
}
+ /* clear purge status */
+ out_be64(mfc_cntl, 0);
+
/* put the SPE in kernel mode to allow access to the loader */
sr1 = spu_mfc_sr1_get(ctx->spu);
sr1 &= ~MFC_STATE1_PROBLEM_STATE_MASK;
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index 3bf908e..ae31573 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -241,9 +241,9 @@
size_t size;
};
-extern struct spufs_tree_descr spufs_dir_contents[];
-extern struct spufs_tree_descr spufs_dir_nosched_contents[];
-extern struct spufs_tree_descr spufs_dir_debug_contents[];
+extern const struct spufs_tree_descr spufs_dir_contents[];
+extern const struct spufs_tree_descr spufs_dir_nosched_contents[];
+extern const struct spufs_tree_descr spufs_dir_debug_contents[];
/* system call implementation */
extern struct spufs_calls spufs_calls;
@@ -358,7 +358,7 @@
u64 (*get)(struct spu_context *ctx);
size_t size;
};
-extern struct spufs_coredump_reader spufs_coredump_read[];
+extern const struct spufs_coredump_reader spufs_coredump_read[];
extern int spufs_coredump_num_notes;
extern int spu_init_csa(struct spu_state *csa);
diff --git a/arch/powerpc/platforms/chrp/Kconfig b/arch/powerpc/platforms/chrp/Kconfig
index 22b4b4e..37d438b 100644
--- a/arch/powerpc/platforms/chrp/Kconfig
+++ b/arch/powerpc/platforms/chrp/Kconfig
@@ -1,6 +1,6 @@
config PPC_CHRP
bool "Common Hardware Reference Platform (CHRP) based machines"
- depends on PPC_MULTIPLATFORM && PPC32
+ depends on 6xx
select MPIC
select PPC_I8259
select PPC_INDIRECT_PCI
diff --git a/arch/powerpc/platforms/chrp/pegasos_eth.c b/arch/powerpc/platforms/chrp/pegasos_eth.c
index 130ff72..039fc8e 100644
--- a/arch/powerpc/platforms/chrp/pegasos_eth.c
+++ b/arch/powerpc/platforms/chrp/pegasos_eth.c
@@ -21,8 +21,8 @@
#define PEGASOS2_SRAM_BASE (0xf2000000)
#define PEGASOS2_SRAM_SIZE (256*1024)
-#define PEGASOS2_SRAM_BASE_ETH0 (PEGASOS2_SRAM_BASE)
-#define PEGASOS2_SRAM_BASE_ETH1 (PEGASOS2_SRAM_BASE_ETH0 + (PEGASOS2_SRAM_SIZE / 2) )
+#define PEGASOS2_SRAM_BASE_ETH_PORT0 (PEGASOS2_SRAM_BASE)
+#define PEGASOS2_SRAM_BASE_ETH_PORT1 (PEGASOS2_SRAM_BASE_ETH_PORT0 + (PEGASOS2_SRAM_SIZE / 2) )
#define PEGASOS2_SRAM_RXRING_SIZE (PEGASOS2_SRAM_SIZE/4)
@@ -47,75 +47,42 @@
.resource = mv643xx_eth_shared_resources,
};
-static struct resource mv643xx_eth0_resources[] = {
+static struct resource mv643xx_eth_port1_resources[] = {
[0] = {
- .name = "eth0 irq",
+ .name = "eth port1 irq",
.start = 9,
.end = 9,
.flags = IORESOURCE_IRQ,
},
};
-
-static struct mv643xx_eth_platform_data eth0_pd = {
- .shared = &mv643xx_eth_shared_device,
- .port_number = 0,
-
- .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH0,
- .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE,
- .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16,
-
- .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH0 + PEGASOS2_SRAM_TXRING_SIZE,
- .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE,
- .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16,
-};
-
-static struct platform_device eth0_device = {
- .name = MV643XX_ETH_NAME,
- .id = 0,
- .num_resources = ARRAY_SIZE(mv643xx_eth0_resources),
- .resource = mv643xx_eth0_resources,
- .dev = {
- .platform_data = ð0_pd,
- },
-};
-
-static struct resource mv643xx_eth1_resources[] = {
- [0] = {
- .name = "eth1 irq",
- .start = 9,
- .end = 9,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct mv643xx_eth_platform_data eth1_pd = {
+static struct mv643xx_eth_platform_data eth_port1_pd = {
.shared = &mv643xx_eth_shared_device,
.port_number = 1,
+ .phy_addr = MV643XX_ETH_PHY_ADDR(7),
- .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH1,
+ .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH_PORT1,
.tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE,
.tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16,
- .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH1 + PEGASOS2_SRAM_TXRING_SIZE,
+ .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH_PORT1 + PEGASOS2_SRAM_TXRING_SIZE,
.rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE,
.rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16,
};
-static struct platform_device eth1_device = {
+static struct platform_device eth_port1_device = {
.name = MV643XX_ETH_NAME,
.id = 1,
- .num_resources = ARRAY_SIZE(mv643xx_eth1_resources),
- .resource = mv643xx_eth1_resources,
+ .num_resources = ARRAY_SIZE(mv643xx_eth_port1_resources),
+ .resource = mv643xx_eth_port1_resources,
.dev = {
- .platform_data = ð1_pd,
+ .platform_data = ð_port1_pd,
},
};
static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
&mv643xx_eth_shared_device,
- ð0_device,
- ð1_device,
+ ð_port1_device,
};
/***********/
@@ -191,15 +158,10 @@
if ( Enable_SRAM() < 0)
{
- eth0_pd.tx_sram_addr = 0;
- eth0_pd.tx_sram_size = 0;
- eth0_pd.rx_sram_addr = 0;
- eth0_pd.rx_sram_size = 0;
-
- eth1_pd.tx_sram_addr = 0;
- eth1_pd.tx_sram_size = 0;
- eth1_pd.rx_sram_addr = 0;
- eth1_pd.rx_sram_size = 0;
+ eth_port1_pd.tx_sram_addr = 0;
+ eth_port1_pd.tx_sram_size = 0;
+ eth_port1_pd.rx_sram_addr = 0;
+ eth_port1_pd.rx_sram_size = 0;
#ifdef BE_VERBOSE
printk("Pegasos II/Marvell MV64361: Can't enable the "
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 4f9f818..291ac9d 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -1,6 +1,6 @@
config EMBEDDED6xx
bool "Embedded 6xx/7xx/7xxx-based boards"
- depends on PPC32 && BROKEN_ON_SMP && PPC_MULTIPLATFORM
+ depends on 6xx && BROKEN_ON_SMP
config LINKSTATION
bool "Linkstation / Kurobox(HG) from Buffalo"
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index 7ddd0a2..647e877 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -1,6 +1,6 @@
config PPC_ISERIES
bool "IBM Legacy iSeries"
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64 && PPC_BOOK3S
select PPC_INDIRECT_IO
select PPC_PCI_CHOICE if EMBEDDED
diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c
index 701d929..94f4447 100644
--- a/arch/powerpc/platforms/iseries/irq.c
+++ b/arch/powerpc/platforms/iseries/irq.c
@@ -214,7 +214,7 @@
unsigned long flags;
for_each_irq (irq) {
- irq_desc_t *desc = get_irq_desc(irq);
+ struct irq_desc *desc = get_irq_desc(irq);
if (desc && desc->chip && desc->chip->startup) {
spin_lock_irqsave(&desc->lock, flags);
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index 24519b9..a6cd339 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -617,7 +617,7 @@
}
static void __iomem *iseries_ioremap(phys_addr_t address, unsigned long size,
- unsigned long flags)
+ unsigned long flags, void *caller)
{
return (void __iomem *)address;
}
diff --git a/arch/powerpc/platforms/maple/Kconfig b/arch/powerpc/platforms/maple/Kconfig
index a6467a5..1ea621a 100644
--- a/arch/powerpc/platforms/maple/Kconfig
+++ b/arch/powerpc/platforms/maple/Kconfig
@@ -1,5 +1,5 @@
config PPC_MAPLE
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64 && PPC_BOOK3S
bool "Maple 970FX Evaluation Board"
select PCI
select MPIC
diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig
index 348e061..a2aeb32 100644
--- a/arch/powerpc/platforms/pasemi/Kconfig
+++ b/arch/powerpc/platforms/pasemi/Kconfig
@@ -1,5 +1,5 @@
config PPC_PASEMI
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64 && PPC_BOOK3S
bool "PA Semi SoC-based platforms"
default n
select MPIC
diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig
index 055990c..1e1a087 100644
--- a/arch/powerpc/platforms/powermac/Kconfig
+++ b/arch/powerpc/platforms/powermac/Kconfig
@@ -1,6 +1,6 @@
config PPC_PMAC
bool "Apple PowerMac based machines"
- depends on PPC_MULTIPLATFORM
+ depends on PPC_BOOK3S
select MPIC
select PCI
select PPC_INDIRECT_PCI if PPC32
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index beb3833..22ecfbe 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -86,6 +86,7 @@
static DEFINE_MUTEX(g5_switch_mutex);
+static unsigned long transition_latency;
#ifdef CONFIG_PMAC_SMU
@@ -357,7 +358,7 @@
static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
- policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ policy->cpuinfo.transition_latency = transition_latency;
policy->cur = g5_cpu_freqs[g5_query_freq()].frequency;
/* secondary CPUs are tied to the primary one by the
* cpufreq core if in the secondary policy we tell it that
@@ -500,6 +501,7 @@
g5_cpu_freqs[1].frequency = max_freq/2;
/* Set callbacks */
+ transition_latency = 12000;
g5_switch_freq = g5_scom_switch_freq;
g5_query_freq = g5_scom_query_freq;
freq_method = "SCOM";
@@ -675,6 +677,7 @@
g5_cpu_freqs[1].frequency = min_freq;
/* Set callbacks */
+ transition_latency = CPUFREQ_ETERNAL;
g5_switch_volt = g5_pfunc_switch_volt;
g5_switch_freq = g5_pfunc_switch_freq;
g5_query_freq = g5_pfunc_query_freq;
diff --git a/arch/powerpc/platforms/powermac/pic.h b/arch/powerpc/platforms/powermac/pic.h
index c44c89f..d622a83 100644
--- a/arch/powerpc/platforms/powermac/pic.h
+++ b/arch/powerpc/platforms/powermac/pic.h
@@ -3,7 +3,7 @@
#include <linux/irq.h>
-extern struct hw_interrupt_type pmac_pic;
+extern struct irq_chip pmac_pic;
extern void pmac_pic_init(void);
extern int pmac_get_irq(void);
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 9b78f53..45936c9 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -746,4 +746,7 @@
#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64)
.cpu_die = pmac_cpu_die,
#endif
+#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
+ .cpu_die = generic_mach_cpu_die,
+#endif
};
diff --git a/arch/powerpc/platforms/prep/Kconfig b/arch/powerpc/platforms/prep/Kconfig
index 29d4112..bf8330e 100644
--- a/arch/powerpc/platforms/prep/Kconfig
+++ b/arch/powerpc/platforms/prep/Kconfig
@@ -1,6 +1,6 @@
config PPC_PREP
bool "PowerPC Reference Platform (PReP) based machines"
- depends on PPC_MULTIPLATFORM && PPC32 && BROKEN
+ depends on 6xx && BROKEN
select MPIC
select PPC_I8259
select PPC_INDIRECT_PCI
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 740ef56..dfe316b 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -1,6 +1,6 @@
config PPC_PS3
bool "Sony PS3"
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64 && PPC_BOOK3S
select PPC_CELL
select USB_ARCH_HAS_OHCI
select USB_OHCI_LITTLE_ENDIAN
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index d281cc0..9a2b6d9 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -311,7 +311,7 @@
result = add_memory(0, start_addr, map.r1.size);
if (result) {
- DBG("%s:%d: add_memory failed: (%d)\n",
+ pr_err("%s:%d: add_memory failed: (%d)\n",
__func__, __LINE__, result);
return result;
}
@@ -322,7 +322,7 @@
result = online_pages(start_pfn, nr_pages);
if (result)
- DBG("%s:%d: online_pages failed: (%d)\n",
+ pr_err("%s:%d: online_pages failed: (%d)\n",
__func__, __LINE__, result);
return result;
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index ddc2a30..f0e6f28 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -1,5 +1,5 @@
config PPC_PSERIES
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64 && PPC_BOOK3S
bool "IBM pSeries & new (POWER5-based) iSeries"
select MPIC
select PPC_I8259
@@ -25,6 +25,11 @@
depends on PPC_PSERIES && PCI
default y if !EMBEDDED
+config PSERIES_MSI
+ bool
+ depends on PCI_MSI && EEH
+ default y
+
config SCANLOG
tristate "Scanlog dump interface"
depends on RTAS_PROC && PPC_PSERIES
@@ -63,3 +68,13 @@
makes sense for a system running in an LPAR where the unused pages
will be reused for other LPARs. The interface allows firmware to
balance memory across many LPARs.
+
+config DTL
+ bool "Dispatch Trace Log"
+ depends on PPC_SPLPAR && DEBUG_FS
+ help
+ SPLPAR machines can log hypervisor preempt & dispatch events to a
+ kernel buffer. Saying Y here will enable logging these events,
+ which are accessible through a debugfs file.
+
+ Say N if you are unsure.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index dfe574a..790c0b8 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -15,7 +15,7 @@
obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o eeh_sysfs.o
obj-$(CONFIG_KEXEC) += kexec.o
obj-$(CONFIG_PCI) += pci.o pci_dlpar.o
-obj-$(CONFIG_PCI_MSI) += msi.o
+obj-$(CONFIG_PSERIES_MSI) += msi.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o
obj-$(CONFIG_MEMORY_HOTPLUG) += hotplug-memory.o
@@ -25,3 +25,4 @@
obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o
obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o
obj-$(CONFIG_CMM) += cmm.o
+obj-$(CONFIG_DTL) += dtl.o
diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
new file mode 100644
index 0000000..fafcaa0
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -0,0 +1,278 @@
+/*
+ * Virtual Processor Dispatch Trace Log
+ *
+ * (C) Copyright IBM Corporation 2009
+ *
+ * Author: Jeremy Kerr <jk@ozlabs.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <asm/smp.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+#include "plpar_wrappers.h"
+
+/*
+ * Layout of entries in the hypervisor's DTL buffer. Although we don't
+ * actually access the internals of an entry (we only need to know the size),
+ * we might as well define it here for reference.
+ */
+struct dtl_entry {
+ u8 dispatch_reason;
+ u8 preempt_reason;
+ u16 processor_id;
+ u32 enqueue_to_dispatch_time;
+ u32 ready_to_enqueue_time;
+ u32 waiting_to_ready_time;
+ u64 timebase;
+ u64 fault_addr;
+ u64 srr0;
+ u64 srr1;
+};
+
+struct dtl {
+ struct dtl_entry *buf;
+ struct dentry *file;
+ int cpu;
+ int buf_entries;
+ u64 last_idx;
+};
+static DEFINE_PER_CPU(struct dtl, dtl);
+
+/*
+ * Dispatch trace log event mask:
+ * 0x7: 0x1: voluntary virtual processor waits
+ * 0x2: time-slice preempts
+ * 0x4: virtual partition memory page faults
+ */
+static u8 dtl_event_mask = 0x7;
+
+
+/*
+ * Size of per-cpu log buffers. Default is just under 16 pages worth.
+ */
+static int dtl_buf_entries = (16 * 85);
+
+
+static int dtl_enable(struct dtl *dtl)
+{
+ unsigned long addr;
+ int ret, hwcpu;
+
+ /* only allow one reader */
+ if (dtl->buf)
+ return -EBUSY;
+
+ /* we need to store the original allocation size for use during read */
+ dtl->buf_entries = dtl_buf_entries;
+
+ dtl->buf = kmalloc_node(dtl->buf_entries * sizeof(struct dtl_entry),
+ GFP_KERNEL, cpu_to_node(dtl->cpu));
+ if (!dtl->buf) {
+ printk(KERN_WARNING "%s: buffer alloc failed for cpu %d\n",
+ __func__, dtl->cpu);
+ return -ENOMEM;
+ }
+
+ /* Register our dtl buffer with the hypervisor. The HV expects the
+ * buffer size to be passed in the second word of the buffer */
+ ((u32 *)dtl->buf)[1] = dtl->buf_entries * sizeof(struct dtl_entry);
+
+ hwcpu = get_hard_smp_processor_id(dtl->cpu);
+ addr = __pa(dtl->buf);
+ ret = register_dtl(hwcpu, addr);
+ if (ret) {
+ printk(KERN_WARNING "%s: DTL registration for cpu %d (hw %d) "
+ "failed with %d\n", __func__, dtl->cpu, hwcpu, ret);
+ kfree(dtl->buf);
+ return -EIO;
+ }
+
+ /* set our initial buffer indices */
+ dtl->last_idx = lppaca[dtl->cpu].dtl_idx = 0;
+
+ /* ensure that our updates to the lppaca fields have occurred before
+ * we actually enable the logging */
+ smp_wmb();
+
+ /* enable event logging */
+ lppaca[dtl->cpu].dtl_enable_mask = dtl_event_mask;
+
+ return 0;
+}
+
+static void dtl_disable(struct dtl *dtl)
+{
+ int hwcpu = get_hard_smp_processor_id(dtl->cpu);
+
+ lppaca[dtl->cpu].dtl_enable_mask = 0x0;
+
+ unregister_dtl(hwcpu, __pa(dtl->buf));
+
+ kfree(dtl->buf);
+ dtl->buf = NULL;
+ dtl->buf_entries = 0;
+}
+
+/* file interface */
+
+static int dtl_file_open(struct inode *inode, struct file *filp)
+{
+ struct dtl *dtl = inode->i_private;
+ int rc;
+
+ rc = dtl_enable(dtl);
+ if (rc)
+ return rc;
+
+ filp->private_data = dtl;
+ return 0;
+}
+
+static int dtl_file_release(struct inode *inode, struct file *filp)
+{
+ struct dtl *dtl = inode->i_private;
+ dtl_disable(dtl);
+ return 0;
+}
+
+static ssize_t dtl_file_read(struct file *filp, char __user *buf, size_t len,
+ loff_t *pos)
+{
+ int rc, cur_idx, last_idx, n_read, n_req, read_size;
+ struct dtl *dtl;
+
+ if ((len % sizeof(struct dtl_entry)) != 0)
+ return -EINVAL;
+
+ dtl = filp->private_data;
+
+ /* requested number of entries to read */
+ n_req = len / sizeof(struct dtl_entry);
+
+ /* actual number of entries read */
+ n_read = 0;
+
+ cur_idx = lppaca[dtl->cpu].dtl_idx;
+ last_idx = dtl->last_idx;
+
+ if (cur_idx - last_idx > dtl->buf_entries) {
+ pr_debug("%s: hv buffer overflow for cpu %d, samples lost\n",
+ __func__, dtl->cpu);
+ }
+
+ cur_idx %= dtl->buf_entries;
+ last_idx %= dtl->buf_entries;
+
+ /* read the tail of the buffer if we've wrapped */
+ if (last_idx > cur_idx) {
+ read_size = min(n_req, dtl->buf_entries - last_idx);
+
+ rc = copy_to_user(buf, &dtl->buf[last_idx],
+ read_size * sizeof(struct dtl_entry));
+ if (rc)
+ return -EFAULT;
+
+ last_idx = 0;
+ n_req -= read_size;
+ n_read += read_size;
+ buf += read_size * sizeof(struct dtl_entry);
+ }
+
+ /* .. and now the head */
+ read_size = min(n_req, cur_idx - last_idx);
+ rc = copy_to_user(buf, &dtl->buf[last_idx],
+ read_size * sizeof(struct dtl_entry));
+ if (rc)
+ return -EFAULT;
+
+ n_read += read_size;
+ dtl->last_idx += n_read;
+
+ return n_read * sizeof(struct dtl_entry);
+}
+
+static struct file_operations dtl_fops = {
+ .open = dtl_file_open,
+ .release = dtl_file_release,
+ .read = dtl_file_read,
+ .llseek = no_llseek,
+};
+
+static struct dentry *dtl_dir;
+
+static int dtl_setup_file(struct dtl *dtl)
+{
+ char name[10];
+
+ sprintf(name, "cpu-%d", dtl->cpu);
+
+ dtl->file = debugfs_create_file(name, 0400, dtl_dir, dtl, &dtl_fops);
+ if (!dtl->file)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int dtl_init(void)
+{
+ struct dentry *event_mask_file, *buf_entries_file;
+ int rc, i;
+
+ if (!firmware_has_feature(FW_FEATURE_SPLPAR))
+ return -ENODEV;
+
+ /* set up common debugfs structure */
+
+ rc = -ENOMEM;
+ dtl_dir = debugfs_create_dir("dtl", powerpc_debugfs_root);
+ if (!dtl_dir) {
+ printk(KERN_WARNING "%s: can't create dtl root dir\n",
+ __func__);
+ goto err;
+ }
+
+ event_mask_file = debugfs_create_x8("dtl_event_mask", 0600,
+ dtl_dir, &dtl_event_mask);
+ buf_entries_file = debugfs_create_u32("dtl_buf_entries", 0600,
+ dtl_dir, &dtl_buf_entries);
+
+ if (!event_mask_file || !buf_entries_file) {
+ printk(KERN_WARNING "%s: can't create dtl files\n", __func__);
+ goto err_remove_dir;
+ }
+
+ /* set up the per-cpu log structures */
+ for_each_possible_cpu(i) {
+ struct dtl *dtl = &per_cpu(dtl, i);
+ dtl->cpu = i;
+
+ rc = dtl_setup_file(dtl);
+ if (rc)
+ goto err_remove_dir;
+ }
+
+ return 0;
+
+err_remove_dir:
+ debugfs_remove_recursive(dtl_dir);
+err:
+ return rc;
+}
+arch_initcall(dtl_init);
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 0ad56ff..380420f 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -79,6 +79,40 @@
return rc;
}
+/**
+ * eeh_disable_irq - disable interrupt for the recovering device
+ */
+static void eeh_disable_irq(struct pci_dev *dev)
+{
+ struct device_node *dn = pci_device_to_OF_node(dev);
+
+ /* Don't disable MSI and MSI-X interrupts. They are
+ * effectively disabled by the DMA Stopped state
+ * when an EEH error occurs.
+ */
+ if (dev->msi_enabled || dev->msix_enabled)
+ return;
+
+ if (!irq_in_use(dev->irq))
+ return;
+
+ PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED;
+ disable_irq_nosync(dev->irq);
+}
+
+/**
+ * eeh_enable_irq - enable interrupt for the recovering device
+ */
+static void eeh_enable_irq(struct pci_dev *dev)
+{
+ struct device_node *dn = pci_device_to_OF_node(dev);
+
+ if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) {
+ PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED;
+ enable_irq(dev->irq);
+ }
+}
+
/* ------------------------------------------------------- */
/**
* eeh_report_error - report pci error to each device driver
@@ -98,11 +132,8 @@
if (!driver)
return;
- if (irq_in_use (dev->irq)) {
- struct device_node *dn = pci_device_to_OF_node(dev);
- PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED;
- disable_irq_nosync(dev->irq);
- }
+ eeh_disable_irq(dev);
+
if (!driver->err_handler ||
!driver->err_handler->error_detected)
return;
@@ -147,15 +178,12 @@
{
enum pci_ers_result rc, *res = userdata;
struct pci_driver *driver = dev->driver;
- struct device_node *dn = pci_device_to_OF_node(dev);
if (!driver)
return;
- if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) {
- PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED;
- enable_irq(dev->irq);
- }
+ eeh_enable_irq(dev);
+
if (!driver->err_handler ||
!driver->err_handler->slot_reset)
return;
@@ -174,17 +202,14 @@
static void eeh_report_resume(struct pci_dev *dev, void *userdata)
{
struct pci_driver *driver = dev->driver;
- struct device_node *dn = pci_device_to_OF_node(dev);
dev->error_state = pci_channel_io_normal;
if (!driver)
return;
- if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) {
- PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED;
- enable_irq(dev->irq);
- }
+ eeh_enable_irq(dev);
+
if (!driver->err_handler ||
!driver->err_handler->resume)
return;
@@ -208,15 +233,12 @@
if (!driver)
return;
- if (irq_in_use (dev->irq)) {
- struct device_node *dn = pci_device_to_OF_node(dev);
- PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED;
- disable_irq_nosync(dev->irq);
- }
- if (!driver->err_handler)
+ eeh_disable_irq(dev);
+
+ if (!driver->err_handler ||
+ !driver->err_handler->error_detected)
return;
- if (!driver->err_handler->error_detected)
- return;
+
driver->err_handler->error_detected(dev, pci_channel_io_perm_failure);
}
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index f15222b..bf2e1ac 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -71,11 +71,13 @@
} while (rtas_busy_delay(rc));
/*
- * If the RTAS call succeeded, check the number of irqs is actually
- * what we asked for. If not, return an error.
+ * If the RTAS call succeeded, return the number of irqs allocated.
+ * If not, make sure we return a negative error code.
*/
- if (rc == 0 && rtas_ret[0] != num_irqs)
- rc = -ENOSPC;
+ if (rc == 0)
+ rc = rtas_ret[0];
+ else if (rc > 0)
+ rc = -rc;
pr_debug("rtas_msi: ibm,change_msi(func=%d,num=%d), got %d rc = %d\n",
func, num_irqs, rtas_ret[0], rc);
@@ -91,7 +93,7 @@
if (!pdn)
return;
- if (rtas_change_msi(pdn, RTAS_CHANGE_FN, 0))
+ if (rtas_change_msi(pdn, RTAS_CHANGE_FN, 0) != 0)
pr_debug("rtas_msi: Setting MSIs to 0 failed!\n");
}
@@ -132,7 +134,7 @@
rtas_disable_msi(pdev);
}
-static int check_req_msi(struct pci_dev *pdev, int nvec)
+static int check_req(struct pci_dev *pdev, int nvec, char *prop_name)
{
struct device_node *dn;
struct pci_dn *pdn;
@@ -144,26 +146,235 @@
dn = pdn->node;
- req_msi = of_get_property(dn, "ibm,req#msi", NULL);
+ req_msi = of_get_property(dn, prop_name, NULL);
if (!req_msi) {
- pr_debug("rtas_msi: No ibm,req#msi on %s\n", dn->full_name);
+ pr_debug("rtas_msi: No %s on %s\n", prop_name, dn->full_name);
return -ENOENT;
}
if (*req_msi < nvec) {
- pr_debug("rtas_msi: ibm,req#msi requests < %d MSIs\n", nvec);
- return -ENOSPC;
+ pr_debug("rtas_msi: %s requests < %d MSIs\n", prop_name, nvec);
+
+ if (*req_msi == 0) /* Be paranoid */
+ return -ENOSPC;
+
+ return *req_msi;
}
return 0;
}
+static int check_req_msi(struct pci_dev *pdev, int nvec)
+{
+ return check_req(pdev, nvec, "ibm,req#msi");
+}
+
+static int check_req_msix(struct pci_dev *pdev, int nvec)
+{
+ return check_req(pdev, nvec, "ibm,req#msi-x");
+}
+
+/* Quota calculation */
+
+static struct device_node *find_pe_total_msi(struct pci_dev *dev, int *total)
+{
+ struct device_node *dn;
+ const u32 *p;
+
+ dn = of_node_get(pci_device_to_OF_node(dev));
+ while (dn) {
+ p = of_get_property(dn, "ibm,pe-total-#msi", NULL);
+ if (p) {
+ pr_debug("rtas_msi: found prop on dn %s\n",
+ dn->full_name);
+ *total = *p;
+ return dn;
+ }
+
+ dn = of_get_next_parent(dn);
+ }
+
+ return NULL;
+}
+
+static struct device_node *find_pe_dn(struct pci_dev *dev, int *total)
+{
+ struct device_node *dn;
+
+ /* Found our PE and assume 8 at that point. */
+
+ dn = pci_device_to_OF_node(dev);
+ if (!dn)
+ return NULL;
+
+ dn = find_device_pe(dn);
+ if (!dn)
+ return NULL;
+
+ /* We actually want the parent */
+ dn = of_get_parent(dn);
+ if (!dn)
+ return NULL;
+
+ /* Hardcode of 8 for old firmwares */
+ *total = 8;
+ pr_debug("rtas_msi: using PE dn %s\n", dn->full_name);
+
+ return dn;
+}
+
+struct msi_counts {
+ struct device_node *requestor;
+ int num_devices;
+ int request;
+ int quota;
+ int spare;
+ int over_quota;
+};
+
+static void *count_non_bridge_devices(struct device_node *dn, void *data)
+{
+ struct msi_counts *counts = data;
+ const u32 *p;
+ u32 class;
+
+ pr_debug("rtas_msi: counting %s\n", dn->full_name);
+
+ p = of_get_property(dn, "class-code", NULL);
+ class = p ? *p : 0;
+
+ if ((class >> 8) != PCI_CLASS_BRIDGE_PCI)
+ counts->num_devices++;
+
+ return NULL;
+}
+
+static void *count_spare_msis(struct device_node *dn, void *data)
+{
+ struct msi_counts *counts = data;
+ const u32 *p;
+ int req;
+
+ if (dn == counts->requestor)
+ req = counts->request;
+ else {
+ /* We don't know if a driver will try to use MSI or MSI-X,
+ * so we just have to punt and use the larger of the two. */
+ req = 0;
+ p = of_get_property(dn, "ibm,req#msi", NULL);
+ if (p)
+ req = *p;
+
+ p = of_get_property(dn, "ibm,req#msi-x", NULL);
+ if (p)
+ req = max(req, (int)*p);
+ }
+
+ if (req < counts->quota)
+ counts->spare += counts->quota - req;
+ else if (req > counts->quota)
+ counts->over_quota++;
+
+ return NULL;
+}
+
+static int msi_quota_for_device(struct pci_dev *dev, int request)
+{
+ struct device_node *pe_dn;
+ struct msi_counts counts;
+ int total;
+
+ pr_debug("rtas_msi: calc quota for %s, request %d\n", pci_name(dev),
+ request);
+
+ pe_dn = find_pe_total_msi(dev, &total);
+ if (!pe_dn)
+ pe_dn = find_pe_dn(dev, &total);
+
+ if (!pe_dn) {
+ pr_err("rtas_msi: couldn't find PE for %s\n", pci_name(dev));
+ goto out;
+ }
+
+ pr_debug("rtas_msi: found PE %s\n", pe_dn->full_name);
+
+ memset(&counts, 0, sizeof(struct msi_counts));
+
+ /* Work out how many devices we have below this PE */
+ traverse_pci_devices(pe_dn, count_non_bridge_devices, &counts);
+
+ if (counts.num_devices == 0) {
+ pr_err("rtas_msi: found 0 devices under PE for %s\n",
+ pci_name(dev));
+ goto out;
+ }
+
+ counts.quota = total / counts.num_devices;
+ if (request <= counts.quota)
+ goto out;
+
+ /* else, we have some more calculating to do */
+ counts.requestor = pci_device_to_OF_node(dev);
+ counts.request = request;
+ traverse_pci_devices(pe_dn, count_spare_msis, &counts);
+
+ /* If the quota isn't an integer multiple of the total, we can
+ * use the remainder as spare MSIs for anyone that wants them. */
+ counts.spare += total % counts.num_devices;
+
+ /* Divide any spare by the number of over-quota requestors */
+ if (counts.over_quota)
+ counts.quota += counts.spare / counts.over_quota;
+
+ /* And finally clamp the request to the possibly adjusted quota */
+ request = min(counts.quota, request);
+
+ pr_debug("rtas_msi: request clamped to quota %d\n", request);
+out:
+ of_node_put(pe_dn);
+
+ return request;
+}
+
static int rtas_msi_check_device(struct pci_dev *pdev, int nvec, int type)
{
- if (type == PCI_CAP_ID_MSIX)
- pr_debug("rtas_msi: MSI-X untested, trying anyway.\n");
+ int quota, rc;
- return check_req_msi(pdev, nvec);
+ if (type == PCI_CAP_ID_MSIX)
+ rc = check_req_msix(pdev, nvec);
+ else
+ rc = check_req_msi(pdev, nvec);
+
+ if (rc)
+ return rc;
+
+ quota = msi_quota_for_device(pdev, nvec);
+
+ if (quota && quota < nvec)
+ return quota;
+
+ return 0;
+}
+
+static int check_msix_entries(struct pci_dev *pdev)
+{
+ struct msi_desc *entry;
+ int expected;
+
+ /* There's no way for us to express to firmware that we want
+ * a discontiguous, or non-zero based, range of MSI-X entries.
+ * So we must reject such requests. */
+
+ expected = 0;
+ list_for_each_entry(entry, &pdev->msi_list, list) {
+ if (entry->msi_attrib.entry_nr != expected) {
+ pr_debug("rtas_msi: bad MSI-X entries.\n");
+ return -EINVAL;
+ }
+ expected++;
+ }
+
+ return 0;
}
static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
@@ -177,6 +388,9 @@
if (!pdn)
return -ENODEV;
+ if (type == PCI_CAP_ID_MSIX && check_msix_entries(pdev))
+ return -EINVAL;
+
/*
* Try the new more explicit firmware interface, if that fails fall
* back to the old interface. The old interface is known to never
@@ -185,21 +399,21 @@
if (type == PCI_CAP_ID_MSI) {
rc = rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, nvec);
- if (rc) {
+ if (rc < 0) {
pr_debug("rtas_msi: trying the old firmware call.\n");
rc = rtas_change_msi(pdn, RTAS_CHANGE_FN, nvec);
}
} else
rc = rtas_change_msi(pdn, RTAS_CHANGE_MSIX_FN, nvec);
- if (rc) {
+ if (rc != nvec) {
pr_debug("rtas_msi: rtas_change_msi() failed\n");
return rc;
}
i = 0;
list_for_each_entry(entry, &pdev->msi_list, list) {
- hwirq = rtas_query_irq_number(pdn, i);
+ hwirq = rtas_query_irq_number(pdn, i++);
if (hwirq < 0) {
pr_debug("rtas_msi: error (%d) getting hwirq\n", rc);
return hwirq;
@@ -234,8 +448,8 @@
}
/* No MSI -> MSIs can't have been assigned by fw, leave LSI */
- if (check_req_msi(pdev, 1)) {
- dev_dbg(&pdev->dev, "rtas_msi: no req#msi, nothing to do.\n");
+ if (check_req_msi(pdev, 1) && check_req_msix(pdev, 1)) {
+ dev_dbg(&pdev->dev, "rtas_msi: no req#msi/x, nothing to do.\n");
return;
}
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 5e1ed3d..ad152a0 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -137,11 +137,9 @@
struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn)
{
struct pci_controller *phb;
- int primary;
pr_debug("PCI: Initializing new hotplug PHB %s\n", dn->full_name);
- primary = list_empty(&hose_list);
phb = pcibios_alloc_controller(dn);
if (!phb)
return NULL;
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index d967c18..a24a6b23 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -43,6 +43,16 @@
return vpa_call(0x3, cpu, vpa);
}
+static inline long unregister_dtl(unsigned long cpu, unsigned long vpa)
+{
+ return vpa_call(0x6, cpu, vpa);
+}
+
+static inline long register_dtl(unsigned long cpu, unsigned long vpa)
+{
+ return vpa_call(0x2, cpu, vpa);
+}
+
static inline long plpar_page_set_loaned(unsigned long vpa)
{
unsigned long cmo_page_sz = cmo_get_page_size();
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index c591a25..b6f1b13 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -468,9 +468,13 @@
rc = blocking_notifier_call_chain(&pSeries_reconfig_chain,
action, value);
+ if (rc == NOTIFY_BAD) {
+ rc = prom_update_property(np, oldprop, newprop);
+ return -ENOMEM;
+ }
}
- return rc;
+ return 0;
}
/**
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index f1c3395..fd969f0 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -52,6 +52,7 @@
* the communication processor devices.
*/
cpm2_map_t __iomem *cpm2_immr;
+EXPORT_SYMBOL(cpm2_immr);
#define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount
of space for CPM as it is larger
@@ -129,7 +130,8 @@
brg -= 4;
}
bp += brg;
- val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src;
+ /* Round the clock divider to the nearest integer. */
+ val = (((clk * 2 / rate) - 1) & ~1) | CPM_BRG_EN | src;
if (div16)
val |= CPM_BRG_DIV16;
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 00d3d17..e4b6d66 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -56,7 +56,7 @@
{
if (cpm_udbg_txdesc) {
#ifdef CONFIG_CPM2
- setbat(1, 0xf0000000, 0xf0000000, 1024*1024, _PAGE_IO);
+ setbat(1, 0xf0000000, 0xf0000000, 1024*1024, PAGE_KERNEL_NCG);
#endif
udbg_putc = udbg_putc_cpm;
}
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 9817f63..78021d8 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -1,12 +1,16 @@
/*
* MPC83xx/85xx/86xx PCI/PCIE support routing.
*
- * Copyright 2007,2008 Freescale Semiconductor, Inc
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2008-2009 MontaVista Software, Inc.
*
* Initial author: Xianghua Xiao <x.xiao@freescale.com>
* Recode: ZHANG WEI <wei.zhang@freescale.com>
* Rewrite the routing for Frescale PCI and PCI Express
* Roy Zang <tie-fei.zang@freescale.com>
+ * MPC83xx PCI-Express support:
+ * Tony Li <tony.li@freescale.com>
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -27,6 +31,29 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+static int fsl_pcie_bus_fixup;
+
+static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
+{
+ /* if we aren't a PCIe don't bother */
+ if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
+ return;
+
+ dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+ fsl_pcie_bus_fixup = 1;
+ return;
+}
+
+static int __init fsl_pcie_check_link(struct pci_controller *hose)
+{
+ u32 val;
+
+ early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
+ if (val < PCIE_LTSSM_L0)
+ return 1;
+ return 0;
+}
+
#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
unsigned int index, const struct resource *res,
@@ -159,28 +186,6 @@
#endif
}
-static int fsl_pcie_bus_fixup;
-
-static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
-{
- /* if we aren't a PCIe don't bother */
- if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
- return ;
-
- dev->class = PCI_CLASS_BRIDGE_PCI << 8;
- fsl_pcie_bus_fixup = 1;
- return ;
-}
-
-static int __init fsl_pcie_check_link(struct pci_controller *hose)
-{
- u32 val;
- early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
- if (val < PCIE_LTSSM_L0)
- return 1;
- return 0;
-}
-
void fsl_pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
@@ -294,8 +299,184 @@
#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8377E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8377, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8378E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8378, quirk_fsl_pcie_header);
+
+struct mpc83xx_pcie_priv {
+ void __iomem *cfg_type0;
+ void __iomem *cfg_type1;
+ u32 dev_base;
+};
+
+/*
+ * With the convention of u-boot, the PCIE outbound window 0 serves
+ * as configuration transactions outbound.
+ */
+#define PEX_OUTWIN0_BAR 0xCA4
+#define PEX_OUTWIN0_TAL 0xCA8
+#define PEX_OUTWIN0_TAH 0xCAC
+
+static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn)
+{
+ struct pci_controller *hose = bus->sysdata;
+
+ if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Workaround for the HW bug: for Type 0 configure transactions the
+ * PCI-E controller does not check the device number bits and just
+ * assumes that the device number bits are 0.
+ */
+ if (bus->number == hose->first_busno ||
+ bus->primary == hose->first_busno) {
+ if (devfn & 0xf8)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ if (ppc_md.pci_exclude_device) {
+ if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus,
+ unsigned int devfn, int offset)
+{
+ struct pci_controller *hose = bus->sysdata;
+ struct mpc83xx_pcie_priv *pcie = hose->dn->data;
+ u8 bus_no = bus->number - hose->first_busno;
+ u32 dev_base = bus_no << 24 | devfn << 16;
+ int ret;
+
+ ret = mpc83xx_pcie_exclude_device(bus, devfn);
+ if (ret)
+ return NULL;
+
+ offset &= 0xfff;
+
+ /* Type 0 */
+ if (bus->number == hose->first_busno)
+ return pcie->cfg_type0 + offset;
+
+ if (pcie->dev_base == dev_base)
+ goto mapped;
+
+ out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, dev_base);
+
+ pcie->dev_base = dev_base;
+mapped:
+ return pcie->cfg_type1 + offset;
+}
+
+static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ void __iomem *cfg_addr;
+
+ cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
+ if (!cfg_addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ switch (len) {
+ case 1:
+ *val = in_8(cfg_addr);
+ break;
+ case 2:
+ *val = in_le16(cfg_addr);
+ break;
+ default:
+ *val = in_le32(cfg_addr);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ void __iomem *cfg_addr;
+
+ cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
+ if (!cfg_addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ switch (len) {
+ case 1:
+ out_8(cfg_addr, val);
+ break;
+ case 2:
+ out_le16(cfg_addr, val);
+ break;
+ default:
+ out_le32(cfg_addr, val);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops mpc83xx_pcie_ops = {
+ .read = mpc83xx_pcie_read_config,
+ .write = mpc83xx_pcie_write_config,
+};
+
+static int __init mpc83xx_pcie_setup(struct pci_controller *hose,
+ struct resource *reg)
+{
+ struct mpc83xx_pcie_priv *pcie;
+ u32 cfg_bar;
+ int ret = -ENOMEM;
+
+ pcie = zalloc_maybe_bootmem(sizeof(*pcie), GFP_KERNEL);
+ if (!pcie)
+ return ret;
+
+ pcie->cfg_type0 = ioremap(reg->start, resource_size(reg));
+ if (!pcie->cfg_type0)
+ goto err0;
+
+ cfg_bar = in_le32(pcie->cfg_type0 + PEX_OUTWIN0_BAR);
+ if (!cfg_bar) {
+ /* PCI-E isn't configured. */
+ ret = -ENODEV;
+ goto err1;
+ }
+
+ pcie->cfg_type1 = ioremap(cfg_bar, 0x1000);
+ if (!pcie->cfg_type1)
+ goto err1;
+
+ WARN_ON(hose->dn->data);
+ hose->dn->data = pcie;
+ hose->ops = &mpc83xx_pcie_ops;
+
+ out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAH, 0);
+ out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, 0);
+
+ if (fsl_pcie_check_link(hose))
+ hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
+
+ return 0;
+err1:
+ iounmap(pcie->cfg_type0);
+err0:
+ kfree(pcie);
+ return ret;
+
+}
+
int __init mpc83xx_add_bridge(struct device_node *dev)
{
+ int ret;
int len;
struct pci_controller *hose;
struct resource rsrc_reg;
@@ -303,6 +484,11 @@
const int *bus_range;
int primary;
+ if (!of_device_is_available(dev)) {
+ pr_warning("%s: disabled by the firmware.\n",
+ dev->full_name);
+ return -ENODEV;
+ }
pr_debug("Adding PCI host bridge %s\n", dev->full_name);
/* Fetch host bridge registers address */
@@ -350,7 +536,14 @@
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
- setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 4, 0);
+ if (of_device_is_compatible(dev, "fsl,mpc8314-pcie")) {
+ ret = mpc83xx_pcie_setup(hose, &rsrc_reg);
+ if (ret)
+ goto err0;
+ } else {
+ setup_indirect_pci(hose, rsrc_cfg.start,
+ rsrc_cfg.start + 4, 0);
+ }
printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
"Firmware bus number: %d->%d\n",
@@ -365,5 +558,8 @@
pci_process_bridge_OF_ranges(hose, dev, primary);
return 0;
+err0:
+ pcibios_free_controller(hose);
+ return ret;
}
#endif /* CONFIG_PPC_83xx */
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 115cb16..a01c89d 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
@@ -328,6 +329,9 @@
struct fsl_usb2_platform_data usb_data;
const unsigned char *prop = NULL;
+ if (!of_device_is_available(np))
+ continue;
+
memset(&r, 0, sizeof(r));
memset(&usb_data, 0, sizeof(usb_data));
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index 9a89cd3..a86d3ce 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -568,8 +568,7 @@
spin_lock_irqsave(&ipic_lock, flags);
- temp = ipic_read(ipic->regs, ipic_info[src].ack);
- temp |= (1 << (31 - ipic_info[src].bit));
+ temp = 1 << (31 - ipic_info[src].bit);
ipic_write(ipic->regs, ipic_info[src].ack, temp);
/* mb() can't guarantee that ack is finished. But it does finish
@@ -592,8 +591,7 @@
temp &= ~(1 << (31 - ipic_info[src].bit));
ipic_write(ipic->regs, ipic_info[src].mask, temp);
- temp = ipic_read(ipic->regs, ipic_info[src].ack);
- temp |= (1 << (31 - ipic_info[src].bit));
+ temp = 1 << (31 - ipic_info[src].bit);
ipic_write(ipic->regs, ipic_info[src].ack, temp);
/* mb() can't guarantee that ack is finished. But it does finish
diff --git a/arch/powerpc/sysdev/msi_bitmap.c b/arch/powerpc/sysdev/msi_bitmap.c
index f84217b..5a32cbe 100644
--- a/arch/powerpc/sysdev/msi_bitmap.c
+++ b/arch/powerpc/sysdev/msi_bitmap.c
@@ -141,7 +141,7 @@
#define check(x) \
if (!(x)) printk("msi_bitmap: test failed at line %d\n", __LINE__);
-void test_basics(void)
+void __init test_basics(void)
{
struct msi_bitmap bmp;
int i, size = 512;
@@ -186,7 +186,7 @@
kfree(bmp.bitmap);
}
-void test_of_node(void)
+void __init test_of_node(void)
{
u32 prop_data[] = { 10, 10, 25, 3, 40, 1, 100, 100, 200, 20 };
const char *expected_str = "0-9,20-24,28-39,41-99,220-255";
@@ -234,7 +234,7 @@
kfree(bmp.bitmap);
}
-int msi_bitmap_selftest(void)
+int __init msi_bitmap_selftest(void)
{
printk(KERN_DEBUG "Running MSI bitmap self-tests ...\n");
diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c
index c858749..aaa9159 100644
--- a/arch/powerpc/sysdev/pmi.c
+++ b/arch/powerpc/sysdev/pmi.c
@@ -50,7 +50,7 @@
static struct pmi_data *data;
-static int pmi_irq_handler(int irq, void *dev_id)
+static irqreturn_t pmi_irq_handler(int irq, void *dev_id)
{
u8 type;
int rc;
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 5558d93..6a2d473 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1839,6 +1839,8 @@
{
struct device_node *np;
+ ppc_pci_flags |= PPC_PCI_ENABLE_PROC_DOMAINS | PPC_PCI_COMPAT_DOMAIN_0;
+
#ifdef CONFIG_PPC4xx_PCI_EXPRESS
for_each_compatible_node(np, NULL, "ibm,plb-pciex")
ppc4xx_probe_pciex_bridge(np);
diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
index b55b4a7..db24c22 100644
--- a/arch/x86/include/asm/ftrace.h
+++ b/arch/x86/include/asm/ftrace.h
@@ -55,29 +55,4 @@
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_FUNCTION_TRACER */
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-
-#ifndef __ASSEMBLY__
-
-/*
- * Stack of return addresses for functions
- * of a thread.
- * Used in struct thread_info
- */
-struct ftrace_ret_stack {
- unsigned long ret;
- unsigned long func;
- unsigned long long calltime;
-};
-
-/*
- * Primary handler of a function return.
- * It relays on ftrace_return_to_handler.
- * Defined in entry_32/64.S
- */
-extern void return_to_handler(void);
-
-#endif /* __ASSEMBLY__ */
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
#endif /* _ASM_X86_FTRACE_H */
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 87d103d..dd2130b 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -10,6 +10,7 @@
#include <linux/kdebug.h>
#include <linux/module.h>
#include <linux/ptrace.h>
+#include <linux/ftrace.h>
#include <linux/kexec.h>
#include <linux/bug.h>
#include <linux/nmi.h>
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 231bdd3..76f7141 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -389,79 +389,6 @@
#endif /* !CONFIG_DYNAMIC_FTRACE */
-/* Add a function return address to the trace stack on thread info.*/
-static int push_return_trace(unsigned long ret, unsigned long long time,
- unsigned long func, int *depth)
-{
- int index;
-
- if (!current->ret_stack)
- return -EBUSY;
-
- /* The return trace stack is full */
- if (current->curr_ret_stack == FTRACE_RETFUNC_DEPTH - 1) {
- atomic_inc(¤t->trace_overrun);
- return -EBUSY;
- }
-
- index = ++current->curr_ret_stack;
- barrier();
- current->ret_stack[index].ret = ret;
- current->ret_stack[index].func = func;
- current->ret_stack[index].calltime = time;
- *depth = index;
-
- return 0;
-}
-
-/* Retrieve a function return address to the trace stack on thread info.*/
-static void pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret)
-{
- int index;
-
- index = current->curr_ret_stack;
-
- if (unlikely(index < 0)) {
- ftrace_graph_stop();
- WARN_ON(1);
- /* Might as well panic, otherwise we have no where to go */
- *ret = (unsigned long)panic;
- return;
- }
-
- *ret = current->ret_stack[index].ret;
- trace->func = current->ret_stack[index].func;
- trace->calltime = current->ret_stack[index].calltime;
- trace->overrun = atomic_read(¤t->trace_overrun);
- trace->depth = index;
- barrier();
- current->curr_ret_stack--;
-
-}
-
-/*
- * Send the trace to the ring-buffer.
- * @return the original return address.
- */
-unsigned long ftrace_return_to_handler(void)
-{
- struct ftrace_graph_ret trace;
- unsigned long ret;
-
- pop_return_trace(&trace, &ret);
- trace.rettime = cpu_clock(raw_smp_processor_id());
- ftrace_graph_return(&trace);
-
- if (unlikely(!ret)) {
- ftrace_graph_stop();
- WARN_ON(1);
- /* Might as well panic. What else to do? */
- ret = (unsigned long)panic;
- }
-
- return ret;
-}
-
/*
* Hook the return address and push it in the stack of return addrs
* in current thread info.
@@ -521,7 +448,7 @@
calltime = cpu_clock(raw_smp_processor_id());
- if (push_return_trace(old, calltime,
+ if (ftrace_push_return_trace(old, calltime,
self_addr, &trace.depth) == -EBUSY) {
*parent = old;
return;
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 2b847d8..26bf370 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -70,7 +70,7 @@
/* Read again to allow register to stabilise */
i2c->interrupt = readb(i2c->base + MPC_I2C_SR);
writeb(0, i2c->base + MPC_I2C_SR);
- wake_up_interruptible(&i2c->queue);
+ wake_up(&i2c->queue);
}
return IRQ_HANDLED;
}
@@ -115,13 +115,10 @@
writeb(0, i2c->base + MPC_I2C_SR);
} else {
/* Interrupt mode */
- result = wait_event_interruptible_timeout(i2c->queue,
+ result = wait_event_timeout(i2c->queue,
(i2c->interrupt & CSR_MIF), timeout);
- if (unlikely(result < 0)) {
- pr_debug("I2C: wait interrupted\n");
- writeccr(i2c, 0);
- } else if (unlikely(!(i2c->interrupt & CSR_MIF))) {
+ if (unlikely(!(i2c->interrupt & CSR_MIF))) {
pr_debug("I2C: wait timeout\n");
writeccr(i2c, 0);
result = -ETIMEDOUT;
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 82607add..c0621d5 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -498,8 +498,8 @@
#define BUILD_STORE_FUNC_INT(name, data) \
static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \
{ \
- u32 val; \
- val = simple_strtoul(buf, NULL, 10); \
+ int val; \
+ val = simple_strtol(buf, NULL, 10); \
if (val < 0 || val > 255) \
return -EINVAL; \
printk(KERN_INFO "Setting specified fan speed to %d\n", val); \
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index cd8e98b..049b0a7 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -1123,9 +1123,9 @@
#endif
static struct of_device_id mpc52xx_fec_match[] = {
- { .type = "network", .compatible = "fsl,mpc5200b-fec", },
- { .type = "network", .compatible = "fsl,mpc5200-fec", },
- { .type = "network", .compatible = "mpc5200-fec", },
+ { .compatible = "fsl,mpc5200b-fec", },
+ { .compatible = "fsl,mpc5200-fec", },
+ { .compatible = "mpc5200-fec", },
{ }
};
diff --git a/drivers/ps3/ps3av.c b/drivers/ps3/ps3av.c
index 5324978..235e87f 100644
--- a/drivers/ps3/ps3av.c
+++ b/drivers/ps3/ps3av.c
@@ -838,7 +838,7 @@
}
/* set mode using id */
-int ps3av_set_video_mode(u32 id)
+int ps3av_set_video_mode(int id)
{
int size;
u32 option;
@@ -940,7 +940,7 @@
static int ps3av_probe(struct ps3_system_bus_device *dev)
{
int res;
- u32 id;
+ int id;
dev_dbg(&dev->core, " -> %s:%d\n", __func__, __LINE__);
dev_dbg(&dev->core, " timeout=%d\n", timeout);
@@ -962,8 +962,10 @@
init_completion(&ps3av->done);
complete(&ps3av->done);
ps3av->wq = create_singlethread_workqueue("ps3avd");
- if (!ps3av->wq)
+ if (!ps3av->wq) {
+ res = -ENOMEM;
goto fail;
+ }
switch (ps3_os_area_get_av_multi_out()) {
case PS3_PARAM_AV_MULTI_OUT_NTSC:
@@ -994,6 +996,12 @@
safe_mode = 1;
#endif /* CONFIG_FB */
id = ps3av_auto_videomode(&ps3av->av_hw_conf);
+ if (id < 0) {
+ printk(KERN_ERR "%s: invalid id :%d\n", __func__, id);
+ res = -EINVAL;
+ goto fail;
+ }
+
safe_mode = 0;
mutex_lock(&ps3av->mutex);
@@ -1007,7 +1015,7 @@
fail:
kfree(ps3av);
ps3av = NULL;
- return -ENOMEM;
+ return res;
}
static int ps3av_remove(struct ps3_system_bus_device *dev)
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index bde4b4b0..5c6ef51 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -406,6 +406,18 @@
pr_debug("CPM uart[%d]:startup\n", port->line);
+ /* If the port is not the console, make sure rx is disabled. */
+ if (!(pinfo->flags & FLAG_CONSOLE)) {
+ /* Disable UART rx */
+ if (IS_SMC(pinfo)) {
+ clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN);
+ clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX);
+ } else {
+ clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR);
+ clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX);
+ }
+ cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
+ }
/* Install interrupt handler. */
retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port);
if (retval)
@@ -420,8 +432,6 @@
setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT));
}
- if (!(pinfo->flags & FLAG_CONSOLE))
- cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
return 0;
}
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 0c3a2ab..7f72f8c 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -50,8 +50,8 @@
/* OF Platform device Usage :
*
* This driver is only used for PSCs configured in uart mode. The device
- * tree will have a node for each PSC in uart mode w/ device_type = "serial"
- * and "mpc52xx-psc-uart" in the compatible string
+ * tree will have a node for each PSC with "mpc52xx-psc-uart" in the compatible
+ * list.
*
* By default, PSC devices are enumerated in the order they are found. However
* a particular PSC number can be forces by adding 'device_no = <port#>'
@@ -522,7 +522,7 @@
/* Request IRQ */
ret = request_irq(port->irq, mpc52xx_uart_int,
- IRQF_DISABLED | IRQF_SAMPLE_RANDOM | IRQF_SHARED,
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
"mpc52xx_psc_uart", port);
if (ret)
return ret;
@@ -1212,30 +1212,18 @@
#endif
static void
-mpc52xx_uart_of_assign(struct device_node *np, int idx)
+mpc52xx_uart_of_assign(struct device_node *np)
{
- int free_idx = -1;
int i;
- /* Find the first free node */
+ /* Find the first free PSC number */
for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) {
if (mpc52xx_uart_nodes[i] == NULL) {
- free_idx = i;
- break;
+ of_node_get(np);
+ mpc52xx_uart_nodes[i] = np;
+ return;
}
}
-
- if ((idx < 0) || (idx >= MPC52xx_PSC_MAXNUM))
- idx = free_idx;
-
- if (idx < 0)
- return; /* No free slot; abort */
-
- of_node_get(np);
- /* If the slot is already occupied, then swap slots */
- if (mpc52xx_uart_nodes[idx] && (free_idx != -1))
- mpc52xx_uart_nodes[free_idx] = mpc52xx_uart_nodes[idx];
- mpc52xx_uart_nodes[idx] = np;
}
static void
@@ -1243,23 +1231,17 @@
{
static int enum_done;
struct device_node *np;
- const unsigned int *devno;
const struct of_device_id *match;
int i;
if (enum_done)
return;
- for_each_node_by_type(np, "serial") {
+ /* Assign index to each PSC in device tree */
+ for_each_matching_node(np, mpc52xx_uart_of_match) {
match = of_match_node(mpc52xx_uart_of_match, np);
- if (!match)
- continue;
-
psc_ops = match->data;
-
- /* Is a particular device number requested? */
- devno = of_get_property(np, "port-number", NULL);
- mpc52xx_uart_of_assign(np, devno ? *devno : -1);
+ mpc52xx_uart_of_assign(np);
}
enum_done = 1;
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index fe7e5f3..494d3f7 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -354,7 +354,7 @@
if (xspi->regs == NULL) {
rc = -ENOMEM;
dev_warn(&ofdev->dev, "ioremap failure\n");
- goto put_master;
+ goto release_mem;
}
xspi->irq = r_irq->start;
@@ -365,7 +365,7 @@
prop = of_get_property(ofdev->node, "xlnx,num-ss-bits", &len);
if (!prop || len < sizeof(*prop)) {
dev_warn(&ofdev->dev, "no 'xlnx,num-ss-bits' property\n");
- goto put_master;
+ goto unmap_io;
}
master->num_chipselect = *prop;
@@ -397,6 +397,8 @@
free_irq(xspi->irq, xspi);
unmap_io:
iounmap(xspi->regs);
+release_mem:
+ release_mem_region(r_mem->start, resource_size(r_mem));
put_master:
spi_master_put(master);
return rc;
@@ -406,6 +408,7 @@
{
struct xilinx_spi *xspi;
struct spi_master *master;
+ struct resource r_mem;
master = platform_get_drvdata(ofdev);
xspi = spi_master_get_devdata(master);
@@ -413,6 +416,8 @@
spi_bitbang_stop(&xspi->bitbang);
free_irq(xspi->irq, xspi);
iounmap(xspi->regs);
+ if (!of_address_to_resource(ofdev->node, 0, &r_mem))
+ release_mem_region(r_mem.start, resource_size(&r_mem));
dev_set_drvdata(&ofdev->dev, 0);
spi_master_put(xspi->bitbang.master);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 55f64af..6302414 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -772,7 +772,7 @@
config GEF_WDT
tristate "GE Fanuc Watchdog Timer"
- depends on GEF_SBC610
+ depends on GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
---help---
Watchdog timer found in a number of GE Fanuc single board computers.
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 677432b..a7f8134 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -380,6 +380,30 @@
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/*
+ * Stack of return addresses for functions
+ * of a thread.
+ * Used in struct thread_info
+ */
+struct ftrace_ret_stack {
+ unsigned long ret;
+ unsigned long func;
+ unsigned long long calltime;
+};
+
+/*
+ * Primary handler of a function return.
+ * It relays on ftrace_return_to_handler.
+ * Defined in entry_32/64.S
+ */
+extern void return_to_handler(void);
+
+extern int
+ftrace_push_return_trace(unsigned long ret, unsigned long long time,
+ unsigned long func, int *depth);
+extern void
+ftrace_pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret);
+
+/*
* Sometimes we don't want to trace a function with the function
* graph tracer but we want them to keep traced by the usual function
* tracer if the function graph tracer is not configured.
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 2c9e808..e5816dd 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2232,6 +2232,14 @@
#define PCI_DEVICE_ID_TDI_EHCI 0x0101
#define PCI_VENDOR_ID_FREESCALE 0x1957
+#define PCI_DEVICE_ID_MPC8315E 0x00b4
+#define PCI_DEVICE_ID_MPC8315 0x00b5
+#define PCI_DEVICE_ID_MPC8314E 0x00b6
+#define PCI_DEVICE_ID_MPC8314 0x00b7
+#define PCI_DEVICE_ID_MPC8378E 0x00c4
+#define PCI_DEVICE_ID_MPC8378 0x00c5
+#define PCI_DEVICE_ID_MPC8377E 0x00c6
+#define PCI_DEVICE_ID_MPC8377 0x00c7
#define PCI_DEVICE_ID_MPC8548E 0x0012
#define PCI_DEVICE_ID_MPC8548 0x0013
#define PCI_DEVICE_ID_MPC8543E 0x0014
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index 930c08e..dce71a5 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -42,6 +42,81 @@
/* pid on the last trace processed */
static pid_t last_pid[NR_CPUS] = { [0 ... NR_CPUS-1] = -1 };
+/* Add a function return address to the trace stack on thread info.*/
+int
+ftrace_push_return_trace(unsigned long ret, unsigned long long time,
+ unsigned long func, int *depth)
+{
+ int index;
+
+ if (!current->ret_stack)
+ return -EBUSY;
+
+ /* The return trace stack is full */
+ if (current->curr_ret_stack == FTRACE_RETFUNC_DEPTH - 1) {
+ atomic_inc(¤t->trace_overrun);
+ return -EBUSY;
+ }
+
+ index = ++current->curr_ret_stack;
+ barrier();
+ current->ret_stack[index].ret = ret;
+ current->ret_stack[index].func = func;
+ current->ret_stack[index].calltime = time;
+ *depth = index;
+
+ return 0;
+}
+
+/* Retrieve a function return address to the trace stack on thread info.*/
+void
+ftrace_pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret)
+{
+ int index;
+
+ index = current->curr_ret_stack;
+
+ if (unlikely(index < 0)) {
+ ftrace_graph_stop();
+ WARN_ON(1);
+ /* Might as well panic, otherwise we have no where to go */
+ *ret = (unsigned long)panic;
+ return;
+ }
+
+ *ret = current->ret_stack[index].ret;
+ trace->func = current->ret_stack[index].func;
+ trace->calltime = current->ret_stack[index].calltime;
+ trace->overrun = atomic_read(¤t->trace_overrun);
+ trace->depth = index;
+ barrier();
+ current->curr_ret_stack--;
+
+}
+
+/*
+ * Send the trace to the ring-buffer.
+ * @return the original return address.
+ */
+unsigned long ftrace_return_to_handler(void)
+{
+ struct ftrace_graph_ret trace;
+ unsigned long ret;
+
+ ftrace_pop_return_trace(&trace, &ret);
+ trace.rettime = cpu_clock(raw_smp_processor_id());
+ ftrace_graph_return(&trace);
+
+ if (unlikely(!ret)) {
+ ftrace_graph_stop();
+ WARN_ON(1);
+ /* Might as well panic. What else to do? */
+ ret = (unsigned long)panic;
+ }
+
+ return ret;
+}
+
static int graph_trace_init(struct trace_array *tr)
{
int cpu, ret;
diff --git a/lib/lmb.c b/lib/lmb.c
index 97e54703..e4a6482 100644
--- a/lib/lmb.c
+++ b/lib/lmb.c
@@ -29,33 +29,33 @@
}
early_param("lmb", early_lmb);
+static void lmb_dump(struct lmb_region *region, char *name)
+{
+ unsigned long long base, size;
+ int i;
+
+ pr_info(" %s.cnt = 0x%lx\n", name, region->cnt);
+
+ for (i = 0; i < region->cnt; i++) {
+ base = region->region[i].base;
+ size = region->region[i].size;
+
+ pr_info(" %s[0x%x]\t0x%016llx - 0x%016llx, 0x%llx bytes\n",
+ name, i, base, base + size - 1, size);
+ }
+}
+
void lmb_dump_all(void)
{
- unsigned long i;
-
if (!lmb_debug)
return;
- pr_info("lmb_dump_all:\n");
- pr_info(" memory.cnt = 0x%lx\n", lmb.memory.cnt);
- pr_info(" memory.size = 0x%llx\n",
- (unsigned long long)lmb.memory.size);
- for (i=0; i < lmb.memory.cnt ;i++) {
- pr_info(" memory.region[0x%lx].base = 0x%llx\n",
- i, (unsigned long long)lmb.memory.region[i].base);
- pr_info(" .size = 0x%llx\n",
- (unsigned long long)lmb.memory.region[i].size);
- }
+ pr_info("LMB configuration:\n");
+ pr_info(" rmo_size = 0x%llx\n", (unsigned long long)lmb.rmo_size);
+ pr_info(" memory.size = 0x%llx\n", (unsigned long long)lmb.memory.size);
- pr_info(" reserved.cnt = 0x%lx\n", lmb.reserved.cnt);
- pr_info(" reserved.size = 0x%llx\n",
- (unsigned long long)lmb.memory.size);
- for (i=0; i < lmb.reserved.cnt ;i++) {
- pr_info(" reserved.region[0x%lx].base = 0x%llx\n",
- i, (unsigned long long)lmb.reserved.region[i].base);
- pr_info(" .size = 0x%llx\n",
- (unsigned long long)lmb.reserved.region[i].size);
- }
+ lmb_dump(&lmb.memory, "memory");
+ lmb_dump(&lmb.reserved, "reserved");
}
static unsigned long lmb_addrs_overlap(u64 base1, u64 size1, u64 base2,