| /* |
| * exynos_thermal.c - Samsung EXYNOS TMU (Thermal Management Unit) |
| * |
| * Copyright (C) 2011 Samsung Electronics |
| * Donggeun Kim <dg77.kim@samsung.com> |
| * Amit Daniel Kachhap <amit.kachhap@linaro.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/err.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/clk.h> |
| #include <linux/workqueue.h> |
| #include <linux/sysfs.h> |
| #include <linux/kobject.h> |
| #include <linux/io.h> |
| #include <linux/mutex.h> |
| #include <linux/platform_data/exynos_thermal.h> |
| #include <linux/thermal.h> |
| #include <linux/cpufreq.h> |
| #include <linux/cpu_cooling.h> |
| #include <linux/of.h> |
| |
| #include <plat/cpu.h> |
| |
| /* Exynos generic registers */ |
| #define EXYNOS_TMU_REG_TRIMINFO 0x0 |
| #define EXYNOS_TMU_REG_CONTROL 0x20 |
| #define EXYNOS_TMU_REG_STATUS 0x28 |
| #define EXYNOS_TMU_REG_CURRENT_TEMP 0x40 |
| #define EXYNOS_TMU_REG_INTEN 0x70 |
| #define EXYNOS_TMU_REG_INTSTAT 0x74 |
| #define EXYNOS_TMU_REG_INTCLEAR 0x78 |
| |
| #define EXYNOS_TMU_TRIM_TEMP_MASK 0xff |
| #define EXYNOS_TMU_GAIN_SHIFT 8 |
| #define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24 |
| #define EXYNOS_TMU_CORE_ON 3 |
| #define EXYNOS_TMU_CORE_OFF 2 |
| #define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET 50 |
| |
| /* Exynos4210 specific registers */ |
| #define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44 |
| #define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50 |
| #define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54 |
| #define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58 |
| #define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C |
| #define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60 |
| #define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64 |
| #define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68 |
| #define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C |
| |
| #define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1 |
| #define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10 |
| #define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100 |
| #define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000 |
| #define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111 |
| |
| /* Exynos5250 and Exynos4412 specific registers */ |
| #define EXYNOS_TMU_TRIMINFO_CON 0x14 |
| #define EXYNOS_THD_TEMP_RISE 0x50 |
| #define EXYNOS_THD_TEMP_FALL 0x54 |
| #define EXYNOS_EMUL_CON 0x80 |
| |
| #define EXYNOS_TRIMINFO_RELOAD 0x1 |
| #define EXYNOS_TMU_CLEAR_RISE_INT 0x111 |
| #define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 16) |
| #define EXYNOS_MUX_ADDR_VALUE 6 |
| #define EXYNOS_MUX_ADDR_SHIFT 20 |
| #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 |
| |
| #define EFUSE_MIN_VALUE 40 |
| #define EFUSE_MAX_VALUE 100 |
| |
| /* In-kernel thermal framework related macros & definations */ |
| #define SENSOR_NAME_LEN 16 |
| #define MAX_TRIP_COUNT 8 |
| #define MAX_COOLING_DEVICE 4 |
| |
| #define ACTIVE_INTERVAL 500 |
| #define IDLE_INTERVAL 10000 |
| #define MCELSIUS 1000 |
| |
| /* CPU Zone information */ |
| #define PANIC_ZONE 4 |
| #define WARN_ZONE 3 |
| #define MONITOR_ZONE 2 |
| #define SAFE_ZONE 1 |
| |
| #define GET_ZONE(trip) (trip + 2) |
| #define GET_TRIP(zone) (zone - 2) |
| |
| #define EXYNOS_ZONE_COUNT 3 |
| |
| struct exynos_tmu_data { |
| struct exynos_tmu_platform_data *pdata; |
| struct resource *mem; |
| void __iomem *base; |
| int irq; |
| enum soc_type soc; |
| struct work_struct irq_work; |
| struct mutex lock; |
| struct clk *clk; |
| u8 temp_error1, temp_error2; |
| }; |
| |
| struct thermal_trip_point_conf { |
| int trip_val[MAX_TRIP_COUNT]; |
| int trip_count; |
| }; |
| |
| struct thermal_cooling_conf { |
| struct freq_clip_table freq_data[MAX_TRIP_COUNT]; |
| int freq_clip_count; |
| }; |
| |
| struct thermal_sensor_conf { |
| char name[SENSOR_NAME_LEN]; |
| int (*read_temperature)(void *data); |
| struct thermal_trip_point_conf trip_data; |
| struct thermal_cooling_conf cooling_data; |
| void *private_data; |
| }; |
| |
| struct exynos_thermal_zone { |
| enum thermal_device_mode mode; |
| struct thermal_zone_device *therm_dev; |
| struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE]; |
| unsigned int cool_dev_size; |
| struct platform_device *exynos4_dev; |
| struct thermal_sensor_conf *sensor_conf; |
| bool bind; |
| }; |
| |
| static struct exynos_thermal_zone *th_zone; |
| static void exynos_unregister_thermal(void); |
| static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf); |
| |
| /* Get mode callback functions for thermal zone */ |
| static int exynos_get_mode(struct thermal_zone_device *thermal, |
| enum thermal_device_mode *mode) |
| { |
| if (th_zone) |
| *mode = th_zone->mode; |
| return 0; |
| } |
| |
| /* Set mode callback functions for thermal zone */ |
| static int exynos_set_mode(struct thermal_zone_device *thermal, |
| enum thermal_device_mode mode) |
| { |
| if (!th_zone->therm_dev) { |
| pr_notice("thermal zone not registered\n"); |
| return 0; |
| } |
| |
| mutex_lock(&th_zone->therm_dev->lock); |
| |
| if (mode == THERMAL_DEVICE_ENABLED) |
| th_zone->therm_dev->polling_delay = IDLE_INTERVAL; |
| else |
| th_zone->therm_dev->polling_delay = 0; |
| |
| mutex_unlock(&th_zone->therm_dev->lock); |
| |
| th_zone->mode = mode; |
| thermal_zone_device_update(th_zone->therm_dev); |
| pr_info("thermal polling set for duration=%d msec\n", |
| th_zone->therm_dev->polling_delay); |
| return 0; |
| } |
| |
| |
| /* Get trip type callback functions for thermal zone */ |
| static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip, |
| enum thermal_trip_type *type) |
| { |
| switch (GET_ZONE(trip)) { |
| case MONITOR_ZONE: |
| case WARN_ZONE: |
| *type = THERMAL_TRIP_ACTIVE; |
| break; |
| case PANIC_ZONE: |
| *type = THERMAL_TRIP_CRITICAL; |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /* Get trip temperature callback functions for thermal zone */ |
| static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip, |
| unsigned long *temp) |
| { |
| if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE)) |
| return -EINVAL; |
| |
| *temp = th_zone->sensor_conf->trip_data.trip_val[trip]; |
| /* convert the temperature into millicelsius */ |
| *temp = *temp * MCELSIUS; |
| |
| return 0; |
| } |
| |
| /* Get critical temperature callback functions for thermal zone */ |
| static int exynos_get_crit_temp(struct thermal_zone_device *thermal, |
| unsigned long *temp) |
| { |
| int ret; |
| /* Panic zone */ |
| ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp); |
| return ret; |
| } |
| |
| static int exynos_get_frequency_level(unsigned int cpu, unsigned int freq) |
| { |
| int i = 0, ret = -EINVAL; |
| struct cpufreq_frequency_table *table = NULL; |
| #ifdef CONFIG_CPU_FREQ |
| table = cpufreq_frequency_get_table(cpu); |
| #endif |
| if (!table) |
| return ret; |
| |
| while (table[i].frequency != CPUFREQ_TABLE_END) { |
| if (table[i].frequency == CPUFREQ_ENTRY_INVALID) |
| continue; |
| if (table[i].frequency == freq) |
| return i; |
| i++; |
| } |
| return ret; |
| } |
| |
| /* Bind callback functions for thermal zone */ |
| static int exynos_bind(struct thermal_zone_device *thermal, |
| struct thermal_cooling_device *cdev) |
| { |
| int ret = 0, i, tab_size, level; |
| struct freq_clip_table *tab_ptr, *clip_data; |
| struct thermal_sensor_conf *data = th_zone->sensor_conf; |
| |
| tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data; |
| tab_size = data->cooling_data.freq_clip_count; |
| |
| if (tab_ptr == NULL || tab_size == 0) |
| return -EINVAL; |
| |
| /* find the cooling device registered*/ |
| for (i = 0; i < th_zone->cool_dev_size; i++) |
| if (cdev == th_zone->cool_dev[i]) |
| break; |
| |
| /* No matching cooling device */ |
| if (i == th_zone->cool_dev_size) |
| return 0; |
| |
| /* Bind the thermal zone to the cpufreq cooling device */ |
| for (i = 0; i < tab_size; i++) { |
| clip_data = (struct freq_clip_table *)&(tab_ptr[i]); |
| level = exynos_get_frequency_level(0, clip_data->freq_clip_max); |
| if (level < 0) |
| return 0; |
| switch (GET_ZONE(i)) { |
| case MONITOR_ZONE: |
| case WARN_ZONE: |
| if (thermal_zone_bind_cooling_device(thermal, i, cdev, |
| level, level)) { |
| pr_err("error binding cdev inst %d\n", i); |
| ret = -EINVAL; |
| } |
| th_zone->bind = true; |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* Unbind callback functions for thermal zone */ |
| static int exynos_unbind(struct thermal_zone_device *thermal, |
| struct thermal_cooling_device *cdev) |
| { |
| int ret = 0, i, tab_size; |
| struct thermal_sensor_conf *data = th_zone->sensor_conf; |
| |
| if (th_zone->bind == false) |
| return 0; |
| |
| tab_size = data->cooling_data.freq_clip_count; |
| |
| if (tab_size == 0) |
| return -EINVAL; |
| |
| /* find the cooling device registered*/ |
| for (i = 0; i < th_zone->cool_dev_size; i++) |
| if (cdev == th_zone->cool_dev[i]) |
| break; |
| |
| /* No matching cooling device */ |
| if (i == th_zone->cool_dev_size) |
| return 0; |
| |
| /* Bind the thermal zone to the cpufreq cooling device */ |
| for (i = 0; i < tab_size; i++) { |
| switch (GET_ZONE(i)) { |
| case MONITOR_ZONE: |
| case WARN_ZONE: |
| if (thermal_zone_unbind_cooling_device(thermal, i, |
| cdev)) { |
| pr_err("error unbinding cdev inst=%d\n", i); |
| ret = -EINVAL; |
| } |
| th_zone->bind = false; |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| } |
| return ret; |
| } |
| |
| /* Get temperature callback functions for thermal zone */ |
| static int exynos_get_temp(struct thermal_zone_device *thermal, |
| unsigned long *temp) |
| { |
| void *data; |
| |
| if (!th_zone->sensor_conf) { |
| pr_info("Temperature sensor not initialised\n"); |
| return -EINVAL; |
| } |
| data = th_zone->sensor_conf->private_data; |
| *temp = th_zone->sensor_conf->read_temperature(data); |
| /* convert the temperature into millicelsius */ |
| *temp = *temp * MCELSIUS; |
| return 0; |
| } |
| |
| /* Get the temperature trend */ |
| static int exynos_get_trend(struct thermal_zone_device *thermal, |
| int trip, enum thermal_trend *trend) |
| { |
| if (thermal->temperature >= trip) |
| *trend = THERMAL_TREND_RAISING; |
| else |
| *trend = THERMAL_TREND_DROPPING; |
| |
| return 0; |
| } |
| /* Operation callback functions for thermal zone */ |
| static struct thermal_zone_device_ops const exynos_dev_ops = { |
| .bind = exynos_bind, |
| .unbind = exynos_unbind, |
| .get_temp = exynos_get_temp, |
| .get_trend = exynos_get_trend, |
| .get_mode = exynos_get_mode, |
| .set_mode = exynos_set_mode, |
| .get_trip_type = exynos_get_trip_type, |
| .get_trip_temp = exynos_get_trip_temp, |
| .get_crit_temp = exynos_get_crit_temp, |
| }; |
| |
| /* |
| * This function may be called from interrupt based temperature sensor |
| * when threshold is changed. |
| */ |
| static void exynos_report_trigger(void) |
| { |
| unsigned int i; |
| char data[10]; |
| char *envp[] = { data, NULL }; |
| |
| if (!th_zone || !th_zone->therm_dev) |
| return; |
| if (th_zone->bind == false) { |
| for (i = 0; i < th_zone->cool_dev_size; i++) { |
| if (!th_zone->cool_dev[i]) |
| continue; |
| exynos_bind(th_zone->therm_dev, |
| th_zone->cool_dev[i]); |
| } |
| } |
| |
| thermal_zone_device_update(th_zone->therm_dev); |
| |
| mutex_lock(&th_zone->therm_dev->lock); |
| /* Find the level for which trip happened */ |
| for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) { |
| if (th_zone->therm_dev->last_temperature < |
| th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS) |
| break; |
| } |
| |
| if (th_zone->mode == THERMAL_DEVICE_ENABLED) { |
| if (i > 0) |
| th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL; |
| else |
| th_zone->therm_dev->polling_delay = IDLE_INTERVAL; |
| } |
| |
| snprintf(data, sizeof(data), "%u", i); |
| kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp); |
| mutex_unlock(&th_zone->therm_dev->lock); |
| } |
| |
| /* Register with the in-kernel thermal management */ |
| static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) |
| { |
| int ret; |
| struct cpumask mask_val; |
| |
| if (!sensor_conf || !sensor_conf->read_temperature) { |
| pr_err("Temperature sensor not initialised\n"); |
| return -EINVAL; |
| } |
| |
| th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL); |
| if (!th_zone) |
| return -ENOMEM; |
| |
| th_zone->sensor_conf = sensor_conf; |
| cpumask_set_cpu(0, &mask_val); |
| th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val); |
| if (IS_ERR(th_zone->cool_dev[0])) { |
| pr_err("Failed to register cpufreq cooling device\n"); |
| ret = -EINVAL; |
| goto err_unregister; |
| } |
| th_zone->cool_dev_size++; |
| |
| th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name, |
| EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0, |
| IDLE_INTERVAL); |
| |
| if (IS_ERR(th_zone->therm_dev)) { |
| pr_err("Failed to register thermal zone device\n"); |
| ret = -EINVAL; |
| goto err_unregister; |
| } |
| th_zone->mode = THERMAL_DEVICE_ENABLED; |
| |
| pr_info("Exynos: Kernel Thermal management registered\n"); |
| |
| return 0; |
| |
| err_unregister: |
| exynos_unregister_thermal(); |
| return ret; |
| } |
| |
| /* Un-Register with the in-kernel thermal management */ |
| static void exynos_unregister_thermal(void) |
| { |
| int i; |
| |
| if (!th_zone) |
| return; |
| |
| if (th_zone->therm_dev) |
| thermal_zone_device_unregister(th_zone->therm_dev); |
| |
| for (i = 0; i < th_zone->cool_dev_size; i++) { |
| if (th_zone->cool_dev[i]) |
| cpufreq_cooling_unregister(th_zone->cool_dev[i]); |
| } |
| |
| kfree(th_zone); |
| pr_info("Exynos: Kernel Thermal management unregistered\n"); |
| } |
| |
| /* |
| * TMU treats temperature as a mapped temperature code. |
| * The temperature is converted differently depending on the calibration type. |
| */ |
| static int temp_to_code(struct exynos_tmu_data *data, u8 temp) |
| { |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| int temp_code; |
| |
| if (data->soc == SOC_ARCH_EXYNOS4210) |
| /* temp should range between 25 and 125 */ |
| if (temp < 25 || temp > 125) { |
| temp_code = -EINVAL; |
| goto out; |
| } |
| |
| switch (pdata->cal_type) { |
| case TYPE_TWO_POINT_TRIMMING: |
| temp_code = (temp - 25) * |
| (data->temp_error2 - data->temp_error1) / |
| (85 - 25) + data->temp_error1; |
| break; |
| case TYPE_ONE_POINT_TRIMMING: |
| temp_code = temp + data->temp_error1 - 25; |
| break; |
| default: |
| temp_code = temp + EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET; |
| break; |
| } |
| out: |
| return temp_code; |
| } |
| |
| /* |
| * Calculate a temperature value from a temperature code. |
| * The unit of the temperature is degree Celsius. |
| */ |
| static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code) |
| { |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| int temp; |
| |
| if (data->soc == SOC_ARCH_EXYNOS4210) |
| /* temp_code should range between 75 and 175 */ |
| if (temp_code < 75 || temp_code > 175) { |
| temp = -ENODATA; |
| goto out; |
| } |
| |
| switch (pdata->cal_type) { |
| case TYPE_TWO_POINT_TRIMMING: |
| temp = (temp_code - data->temp_error1) * (85 - 25) / |
| (data->temp_error2 - data->temp_error1) + 25; |
| break; |
| case TYPE_ONE_POINT_TRIMMING: |
| temp = temp_code - data->temp_error1 + 25; |
| break; |
| default: |
| temp = temp_code - EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET; |
| break; |
| } |
| out: |
| return temp; |
| } |
| |
| static int exynos_tmu_initialize(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| unsigned int status, trim_info, rising_threshold; |
| int ret = 0, threshold_code; |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| status = readb(data->base + EXYNOS_TMU_REG_STATUS); |
| if (!status) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| if (data->soc == SOC_ARCH_EXYNOS) { |
| __raw_writel(EXYNOS_TRIMINFO_RELOAD, |
| data->base + EXYNOS_TMU_TRIMINFO_CON); |
| } |
| /* Save trimming info in order to perform calibration */ |
| trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); |
| data->temp_error1 = trim_info & EXYNOS_TMU_TRIM_TEMP_MASK; |
| data->temp_error2 = ((trim_info >> 8) & EXYNOS_TMU_TRIM_TEMP_MASK); |
| |
| if ((EFUSE_MIN_VALUE > data->temp_error1) || |
| (data->temp_error1 > EFUSE_MAX_VALUE) || |
| (data->temp_error2 != 0)) |
| data->temp_error1 = pdata->efuse_value; |
| |
| if (data->soc == SOC_ARCH_EXYNOS4210) { |
| /* Write temperature code for threshold */ |
| threshold_code = temp_to_code(data, pdata->threshold); |
| if (threshold_code < 0) { |
| ret = threshold_code; |
| goto out; |
| } |
| writeb(threshold_code, |
| data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP); |
| |
| writeb(pdata->trigger_levels[0], |
| data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0); |
| writeb(pdata->trigger_levels[1], |
| data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL1); |
| writeb(pdata->trigger_levels[2], |
| data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL2); |
| writeb(pdata->trigger_levels[3], |
| data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL3); |
| |
| writel(EXYNOS4210_TMU_INTCLEAR_VAL, |
| data->base + EXYNOS_TMU_REG_INTCLEAR); |
| } else if (data->soc == SOC_ARCH_EXYNOS) { |
| /* Write temperature code for threshold */ |
| threshold_code = temp_to_code(data, pdata->trigger_levels[0]); |
| if (threshold_code < 0) { |
| ret = threshold_code; |
| goto out; |
| } |
| rising_threshold = threshold_code; |
| threshold_code = temp_to_code(data, pdata->trigger_levels[1]); |
| if (threshold_code < 0) { |
| ret = threshold_code; |
| goto out; |
| } |
| rising_threshold |= (threshold_code << 8); |
| threshold_code = temp_to_code(data, pdata->trigger_levels[2]); |
| if (threshold_code < 0) { |
| ret = threshold_code; |
| goto out; |
| } |
| rising_threshold |= (threshold_code << 16); |
| |
| writel(rising_threshold, |
| data->base + EXYNOS_THD_TEMP_RISE); |
| writel(0, data->base + EXYNOS_THD_TEMP_FALL); |
| |
| writel(EXYNOS_TMU_CLEAR_RISE_INT|EXYNOS_TMU_CLEAR_FALL_INT, |
| data->base + EXYNOS_TMU_REG_INTCLEAR); |
| } |
| out: |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| |
| return ret; |
| } |
| |
| static void exynos_tmu_control(struct platform_device *pdev, bool on) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| unsigned int con, interrupt_en; |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| con = pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT | |
| pdata->gain << EXYNOS_TMU_GAIN_SHIFT; |
| |
| if (data->soc == SOC_ARCH_EXYNOS) { |
| con |= pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT; |
| con |= (EXYNOS_MUX_ADDR_VALUE << EXYNOS_MUX_ADDR_SHIFT); |
| } |
| |
| if (on) { |
| con |= EXYNOS_TMU_CORE_ON; |
| interrupt_en = pdata->trigger_level3_en << 12 | |
| pdata->trigger_level2_en << 8 | |
| pdata->trigger_level1_en << 4 | |
| pdata->trigger_level0_en; |
| } else { |
| con |= EXYNOS_TMU_CORE_OFF; |
| interrupt_en = 0; /* Disable all interrupts */ |
| } |
| writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN); |
| writel(con, data->base + EXYNOS_TMU_REG_CONTROL); |
| |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| } |
| |
| static int exynos_tmu_read(struct exynos_tmu_data *data) |
| { |
| u8 temp_code; |
| int temp; |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| temp_code = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP); |
| temp = code_to_temp(data, temp_code); |
| |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| |
| return temp; |
| } |
| |
| static void exynos_tmu_work(struct work_struct *work) |
| { |
| struct exynos_tmu_data *data = container_of(work, |
| struct exynos_tmu_data, irq_work); |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| |
| if (data->soc == SOC_ARCH_EXYNOS) |
| writel(EXYNOS_TMU_CLEAR_RISE_INT, |
| data->base + EXYNOS_TMU_REG_INTCLEAR); |
| else |
| writel(EXYNOS4210_TMU_INTCLEAR_VAL, |
| data->base + EXYNOS_TMU_REG_INTCLEAR); |
| |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| exynos_report_trigger(); |
| enable_irq(data->irq); |
| } |
| |
| static irqreturn_t exynos_tmu_irq(int irq, void *id) |
| { |
| struct exynos_tmu_data *data = id; |
| |
| disable_irq_nosync(irq); |
| schedule_work(&data->irq_work); |
| |
| return IRQ_HANDLED; |
| } |
| static struct thermal_sensor_conf exynos_sensor_conf = { |
| .name = "exynos-therm", |
| .read_temperature = (int (*)(void *))exynos_tmu_read, |
| }; |
| |
| #if defined(CONFIG_CPU_EXYNOS4210) |
| static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = { |
| .threshold = 80, |
| .trigger_levels[0] = 5, |
| .trigger_levels[1] = 20, |
| .trigger_levels[2] = 30, |
| .trigger_level0_en = 1, |
| .trigger_level1_en = 1, |
| .trigger_level2_en = 1, |
| .trigger_level3_en = 0, |
| .gain = 15, |
| .reference_voltage = 7, |
| .cal_type = TYPE_ONE_POINT_TRIMMING, |
| .freq_tab[0] = { |
| .freq_clip_max = 800 * 1000, |
| .temp_level = 85, |
| }, |
| .freq_tab[1] = { |
| .freq_clip_max = 200 * 1000, |
| .temp_level = 100, |
| }, |
| .freq_tab_count = 2, |
| .type = SOC_ARCH_EXYNOS4210, |
| }; |
| #define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data) |
| #else |
| #define EXYNOS4210_TMU_DRV_DATA (NULL) |
| #endif |
| |
| #if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412) |
| static struct exynos_tmu_platform_data const exynos_default_tmu_data = { |
| .trigger_levels[0] = 85, |
| .trigger_levels[1] = 103, |
| .trigger_levels[2] = 110, |
| .trigger_level0_en = 1, |
| .trigger_level1_en = 1, |
| .trigger_level2_en = 1, |
| .trigger_level3_en = 0, |
| .gain = 8, |
| .reference_voltage = 16, |
| .noise_cancel_mode = 4, |
| .cal_type = TYPE_ONE_POINT_TRIMMING, |
| .efuse_value = 55, |
| .freq_tab[0] = { |
| .freq_clip_max = 800 * 1000, |
| .temp_level = 85, |
| }, |
| .freq_tab[1] = { |
| .freq_clip_max = 200 * 1000, |
| .temp_level = 103, |
| }, |
| .freq_tab_count = 2, |
| .type = SOC_ARCH_EXYNOS, |
| }; |
| #define EXYNOS_TMU_DRV_DATA (&exynos_default_tmu_data) |
| #else |
| #define EXYNOS_TMU_DRV_DATA (NULL) |
| #endif |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id exynos_tmu_match[] = { |
| { |
| .compatible = "samsung,exynos4210-tmu", |
| .data = (void *)EXYNOS4210_TMU_DRV_DATA, |
| }, |
| { |
| .compatible = "samsung,exynos5250-tmu", |
| .data = (void *)EXYNOS_TMU_DRV_DATA, |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, exynos_tmu_match); |
| #else |
| #define exynos_tmu_match NULL |
| #endif |
| |
| static struct platform_device_id exynos_tmu_driver_ids[] = { |
| { |
| .name = "exynos4210-tmu", |
| .driver_data = (kernel_ulong_t)EXYNOS4210_TMU_DRV_DATA, |
| }, |
| { |
| .name = "exynos5250-tmu", |
| .driver_data = (kernel_ulong_t)EXYNOS_TMU_DRV_DATA, |
| }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(platform, exynos_tmu_driver_ids); |
| |
| static inline struct exynos_tmu_platform_data *exynos_get_driver_data( |
| struct platform_device *pdev) |
| { |
| #ifdef CONFIG_OF |
| if (pdev->dev.of_node) { |
| const struct of_device_id *match; |
| match = of_match_node(exynos_tmu_match, pdev->dev.of_node); |
| if (!match) |
| return NULL; |
| return (struct exynos_tmu_platform_data *) match->data; |
| } |
| #endif |
| return (struct exynos_tmu_platform_data *) |
| platform_get_device_id(pdev)->driver_data; |
| } |
| static int __devinit exynos_tmu_probe(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data; |
| struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data; |
| int ret, i; |
| |
| if (!pdata) |
| pdata = exynos_get_driver_data(pdev); |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "No platform init data supplied.\n"); |
| return -ENODEV; |
| } |
| data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data), |
| GFP_KERNEL); |
| if (!data) { |
| dev_err(&pdev->dev, "Failed to allocate driver structure\n"); |
| return -ENOMEM; |
| } |
| |
| data->irq = platform_get_irq(pdev, 0); |
| if (data->irq < 0) { |
| dev_err(&pdev->dev, "Failed to get platform irq\n"); |
| return data->irq; |
| } |
| |
| INIT_WORK(&data->irq_work, exynos_tmu_work); |
| |
| data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!data->mem) { |
| dev_err(&pdev->dev, "Failed to get platform resource\n"); |
| return -ENOENT; |
| } |
| |
| data->base = devm_request_and_ioremap(&pdev->dev, data->mem); |
| if (!data->base) { |
| dev_err(&pdev->dev, "Failed to ioremap memory\n"); |
| return -ENODEV; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq, |
| IRQF_TRIGGER_RISING, "exynos-tmu", data); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); |
| return ret; |
| } |
| |
| data->clk = clk_get(NULL, "tmu_apbif"); |
| if (IS_ERR(data->clk)) { |
| dev_err(&pdev->dev, "Failed to get clock\n"); |
| return PTR_ERR(data->clk); |
| } |
| |
| if (pdata->type == SOC_ARCH_EXYNOS || |
| pdata->type == SOC_ARCH_EXYNOS4210) |
| data->soc = pdata->type; |
| else { |
| ret = -EINVAL; |
| dev_err(&pdev->dev, "Platform not supported\n"); |
| goto err_clk; |
| } |
| |
| data->pdata = pdata; |
| platform_set_drvdata(pdev, data); |
| mutex_init(&data->lock); |
| |
| ret = exynos_tmu_initialize(pdev); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to initialize TMU\n"); |
| goto err_clk; |
| } |
| |
| exynos_tmu_control(pdev, true); |
| |
| /* Register the sensor with thermal management interface */ |
| (&exynos_sensor_conf)->private_data = data; |
| exynos_sensor_conf.trip_data.trip_count = pdata->trigger_level0_en + |
| pdata->trigger_level1_en + pdata->trigger_level2_en + |
| pdata->trigger_level3_en; |
| |
| for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++) |
| exynos_sensor_conf.trip_data.trip_val[i] = |
| pdata->threshold + pdata->trigger_levels[i]; |
| |
| exynos_sensor_conf.cooling_data.freq_clip_count = |
| pdata->freq_tab_count; |
| for (i = 0; i < pdata->freq_tab_count; i++) { |
| exynos_sensor_conf.cooling_data.freq_data[i].freq_clip_max = |
| pdata->freq_tab[i].freq_clip_max; |
| exynos_sensor_conf.cooling_data.freq_data[i].temp_level = |
| pdata->freq_tab[i].temp_level; |
| } |
| |
| ret = exynos_register_thermal(&exynos_sensor_conf); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to register thermal interface\n"); |
| goto err_clk; |
| } |
| return 0; |
| err_clk: |
| platform_set_drvdata(pdev, NULL); |
| clk_put(data->clk); |
| return ret; |
| } |
| |
| static int __devexit exynos_tmu_remove(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| |
| exynos_tmu_control(pdev, false); |
| |
| exynos_unregister_thermal(); |
| |
| clk_put(data->clk); |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int exynos_tmu_suspend(struct device *dev) |
| { |
| exynos_tmu_control(to_platform_device(dev), false); |
| |
| return 0; |
| } |
| |
| static int exynos_tmu_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| exynos_tmu_initialize(pdev); |
| exynos_tmu_control(pdev, true); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(exynos_tmu_pm, |
| exynos_tmu_suspend, exynos_tmu_resume); |
| #define EXYNOS_TMU_PM (&exynos_tmu_pm) |
| #else |
| #define EXYNOS_TMU_PM NULL |
| #endif |
| |
| static struct platform_driver exynos_tmu_driver = { |
| .driver = { |
| .name = "exynos-tmu", |
| .owner = THIS_MODULE, |
| .pm = EXYNOS_TMU_PM, |
| .of_match_table = exynos_tmu_match, |
| }, |
| .probe = exynos_tmu_probe, |
| .remove = __devexit_p(exynos_tmu_remove), |
| .id_table = exynos_tmu_driver_ids, |
| }; |
| |
| module_platform_driver(exynos_tmu_driver); |
| |
| MODULE_DESCRIPTION("EXYNOS TMU Driver"); |
| MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:exynos-tmu"); |