drivers/net/wireless/zd1211rw/zd_rf_rf2959.c - kernel/msm-4.19 - Gitiles

 /* zd_rf_rfmd.c: Functions for the RFMD RF controller
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */

 #include <linux/kernel.h>

 #include "zd_rf.h"
 #include "zd_usb.h"
 #include "zd_chip.h"

 static const u32 rf2959_table[][2] = {
 	RF_CHANNEL( 1) = { 0x181979, 0x1e6666 },
 	RF_CHANNEL( 2) = { 0x181989, 0x1e6666 },
 	RF_CHANNEL( 3) = { 0x181999, 0x1e6666 },
 	RF_CHANNEL( 4) = { 0x1819a9, 0x1e6666 },
 	RF_CHANNEL( 5) = { 0x1819b9, 0x1e6666 },
 	RF_CHANNEL( 6) = { 0x1819c9, 0x1e6666 },
 	RF_CHANNEL( 7) = { 0x1819d9, 0x1e6666 },
 	RF_CHANNEL( 8) = { 0x1819e9, 0x1e6666 },
 	RF_CHANNEL( 9) = { 0x1819f9, 0x1e6666 },
 	RF_CHANNEL(10) = { 0x181a09, 0x1e6666 },
 	RF_CHANNEL(11) = { 0x181a19, 0x1e6666 },
 	RF_CHANNEL(12) = { 0x181a29, 0x1e6666 },
 	RF_CHANNEL(13) = { 0x181a39, 0x1e6666 },
 	RF_CHANNEL(14) = { 0x181a60, 0x1c0000 },
 };

 #if 0
 static int bits(u32 rw, int from, int to)
 {
 	rw &= ~(0xffffffffU << (to+1));
 	rw >>= from;
 	return rw;
 }

 static int bit(u32 rw, int bit)
 {
 	return bits(rw, bit, bit);
 }

 static void dump_regwrite(u32 rw)
 {
 	int reg = bits(rw, 18, 22);
 	int rw_flag = bits(rw, 23, 23);
 	PDEBUG("rf2959 %#010x reg %d rw %d", rw, reg, rw_flag);

 	switch (reg) {
 	case 0:
 		PDEBUG("reg0 CFG1 ref_sel %d hybernate %d rf_vco_reg_en %d"
 		       " if_vco_reg_en %d if_vga_en %d",
 		       bits(rw, 14, 15), bit(rw, 3), bit(rw, 2), bit(rw, 1),
 		       bit(rw, 0));
 		break;
 	case 1:
 		PDEBUG("reg1 IFPLL1 pll_en1 %d kv_en1 %d vtc_en1 %d lpf1 %d"
 		       " cpl1 %d pdp1 %d autocal_en1 %d ld_en1 %d ifloopr %d"
 		       " ifloopc %d dac1 %d",
 		       bit(rw, 17), bit(rw, 16), bit(rw, 15), bit(rw, 14),
 		       bit(rw, 13), bit(rw, 12), bit(rw, 11), bit(rw, 10),
 		       bits(rw, 7, 9), bits(rw, 4, 6), bits(rw, 0, 3));
 		break;
 	case 2:
 		PDEBUG("reg2 IFPLL2 n1 %d num1 %d",
 		       bits(rw, 6, 17), bits(rw, 0, 5));
 		break;
 	case 3:
 		PDEBUG("reg3 IFPLL3 num %d", bits(rw, 0, 17));
 		break;
 	case 4:
 		PDEBUG("reg4 IFPLL4 dn1 %#04x ct_def1 %d kv_def1 %d",
 		       bits(rw, 8, 16), bits(rw, 4, 7), bits(rw, 0, 3));
 		break;
 	case 5:
 		PDEBUG("reg5 RFPLL1 pll_en %d kv_en %d vtc_en %d lpf %d cpl %d"
 		       " pdp %d autocal_en %d ld_en %d rfloopr %d rfloopc %d"
 		       " dac %d",
 		       bit(rw, 17), bit(rw, 16), bit(rw, 15), bit(rw, 14),
 		       bit(rw, 13), bit(rw, 12), bit(rw, 11), bit(rw, 10),
 		       bits(rw, 7, 9), bits(rw, 4, 6), bits(rw, 0,3));
 		break;
 	case 6:
 		PDEBUG("reg6 RFPLL2 n %d num %d",
 		       bits(rw, 6, 17), bits(rw, 0, 5));
 		break;
 	case 7:
 		PDEBUG("reg7 RFPLL3 num2 %d", bits(rw, 0, 17));
 		break;
 	case 8:
 		PDEBUG("reg8 RFPLL4 dn %#06x ct_def %d kv_def %d",
 		       bits(rw, 8, 16), bits(rw, 4, 7), bits(rw, 0, 3));
 		break;
 	case 9:
 		PDEBUG("reg9 CAL1 tvco %d tlock %d m_ct_value %d ld_window %d",
 		       bits(rw, 13, 17), bits(rw, 8, 12), bits(rw, 3, 7),
 		       bits(rw, 0, 2));
 		break;
 	case 10:
 		PDEBUG("reg10 TXRX1 rxdcfbbyps %d pcontrol %d txvgc %d"
 		       " rxlpfbw %d txlpfbw %d txdiffmode %d txenmode %d"
 		       " intbiasen %d tybypass %d",
 		       bit(rw, 17), bits(rw, 15, 16), bits(rw, 10, 14),
 		       bits(rw, 7, 9), bits(rw, 4, 6), bit(rw, 3), bit(rw, 2),
 		       bit(rw, 1), bit(rw, 0));
 		break;
 	case 11:
 		PDEBUG("reg11 PCNT1 mid_bias %d p_desired %d pc_offset %d"
 			" tx_delay %d",
 			bits(rw, 15, 17), bits(rw, 9, 14), bits(rw, 3, 8),
 			bits(rw, 0, 2));
 		break;
 	case 12:
 		PDEBUG("reg12 PCNT2 max_power %d mid_power %d min_power %d",
 		       bits(rw, 12, 17), bits(rw, 6, 11), bits(rw, 0, 5));
 		break;
 	case 13:
 		PDEBUG("reg13 VCOT1 rfpll vco comp %d ifpll vco comp %d"
 		       " lobias %d if_biasbuf %d if_biasvco %d rf_biasbuf %d"
 		       " rf_biasvco %d",
 		       bit(rw, 17), bit(rw, 16), bit(rw, 15),
 		       bits(rw, 8, 9), bits(rw, 5, 7), bits(rw, 3, 4),
 		       bits(rw, 0, 2));
 		break;
 	case 14:
 		PDEBUG("reg14 IQCAL rx_acal %d rx_pcal %d"
 		       " tx_acal %d tx_pcal %d",
 		       bits(rw, 13, 17), bits(rw, 9, 12), bits(rw, 4, 8),
 		       bits(rw, 0, 3));
 		break;
 	}
 }
 #endif /* 0 */

 static int rf2959_init_hw(struct zd_rf *rf)
 {
 	int r;
 	struct zd_chip *chip = zd_rf_to_chip(rf);

 	static const struct zd_ioreq16 ioreqs[] = {
 		{ CR2,   0x1E }, { CR9,   0x20 }, { CR10,  0x89 },
 		{ CR11,  0x00 }, { CR15,  0xD0 }, { CR17,  0x68 },
 		{ CR19,  0x4a }, { CR20,  0x0c }, { CR21,  0x0E },
 		{ CR23,  0x48 },
 		/* normal size for cca threshold */
 		{ CR24,  0x14 },
 		/* { CR24,  0x20 }, */
 		{ CR26,  0x90 }, { CR27,  0x30 }, { CR29,  0x20 },
 		{ CR31,  0xb2 }, { CR32,  0x43 }, { CR33,  0x28 },
 		{ CR38,  0x30 }, { CR34,  0x0f }, { CR35,  0xF0 },
 		{ CR41,  0x2a }, { CR46,  0x7F }, { CR47,  0x1E },
 		{ CR51,  0xc5 }, { CR52,  0xc5 }, { CR53,  0xc5 },
 		{ CR79,  0x58 }, { CR80,  0x30 }, { CR81,  0x30 },
 		{ CR82,  0x00 }, { CR83,  0x24 }, { CR84,  0x04 },
 		{ CR85,  0x00 }, { CR86,  0x10 }, { CR87,  0x2A },
 		{ CR88,  0x10 }, { CR89,  0x24 }, { CR90,  0x18 },
 		/* { CR91,  0x18 }, */
 		/* should solve continous CTS frame problems */
 		{ CR91,  0x00 },
 		{ CR92,  0x0a }, { CR93,  0x00 }, { CR94,  0x01 },
 		{ CR95,  0x00 }, { CR96,  0x40 }, { CR97,  0x37 },
 		{ CR98,  0x05 }, { CR99,  0x28 }, { CR100, 0x00 },
 		{ CR101, 0x13 }, { CR102, 0x27 }, { CR103, 0x27 },
 		{ CR104, 0x18 }, { CR105, 0x12 },
 		/* normal size */
 		{ CR106, 0x1a },
 		/* { CR106, 0x22 }, */
 		{ CR107, 0x24 }, { CR108, 0x0a }, { CR109, 0x13 },
 		{ CR110, 0x2F }, { CR111, 0x27 }, { CR112, 0x27 },
 		{ CR113, 0x27 }, { CR114, 0x27 }, { CR115, 0x40 },
 		{ CR116, 0x40 }, { CR117, 0xF0 }, { CR118, 0xF0 },
 		{ CR119, 0x16 },
 		/* no TX continuation */
 		{ CR122, 0x00 },
 		/* { CR122, 0xff }, */
 		{ CR127, 0x03 }, { CR131, 0x08 }, { CR138, 0x28 },
 		{ CR148, 0x44 }, { CR150, 0x10 }, { CR169, 0xBB },
 		{ CR170, 0xBB },
 	};

 	static const u32 rv[] = {
 		0x000007,  /* REG0(CFG1) */
 		0x07dd43,  /* REG1(IFPLL1) */
 		0x080959,  /* REG2(IFPLL2) */
 		0x0e6666,
 		0x116a57,  /* REG4 */
 		0x17dd43,  /* REG5 */
 		0x1819f9,  /* REG6 */
 		0x1e6666,
 		0x214554,
 		0x25e7fa,
 		0x27fffa,
 		/* The Zydas driver somehow forgets to set this value. It's
 		 * only set for Japan. We are using internal power control
 		 * for now.
 		 */
 		0x294128, /* internal power */
 		/* 0x28252c, */ /* External control TX power */
 		/* CR31_CCK, CR51_6-36M, CR52_48M, CR53_54M */
 		0x2c0000,
 		0x300000,
 		0x340000,  /* REG13(0xD) */
 		0x381e0f,  /* REG14(0xE) */
 		/* Bogus, RF2959's data sheet doesn't know register 27, which is
 		 * actually referenced here. The commented 0x11 is 17.
 		 */
 		0x6c180f,  /* REG27(0x11) */
 	};

 	r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
 	if (r)
 		return r;

 	return zd_rfwritev_locked(chip, rv, ARRAY_SIZE(rv), RF_RV_BITS);
 }

 static int rf2959_set_channel(struct zd_rf *rf, u8 channel)
 {
 	int i, r;
 	const u32 *rv = rf2959_table[channel-1];
 	struct zd_chip *chip = zd_rf_to_chip(rf);

 	for (i = 0; i < 2; i++) {
 		r = zd_rfwrite_locked(chip, rv[i], RF_RV_BITS);
 		if (r)
 			return r;
 	}
 	return 0;
 }

 static int rf2959_switch_radio_on(struct zd_rf *rf)
 {
 	static const struct zd_ioreq16 ioreqs[] = {
 		{ CR10, 0x89 },
 		{ CR11, 0x00 },
 	};
 	struct zd_chip *chip = zd_rf_to_chip(rf);

 	return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
 }

 static int rf2959_switch_radio_off(struct zd_rf *rf)
 {
 	static const struct zd_ioreq16 ioreqs[] = {
 		{ CR10, 0x15 },
 		{ CR11, 0x81 },
 	};
 	struct zd_chip *chip = zd_rf_to_chip(rf);

 	return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
 }

 int zd_rf_init_rf2959(struct zd_rf *rf)
 {
 	struct zd_chip *chip = zd_rf_to_chip(rf);

 	if (zd_chip_is_zd1211b(chip)) {
 		dev_err(zd_chip_dev(chip),
 		       "RF2959 is currently not supported for ZD1211B"
 		       " devices\n");
 		return -ENODEV;
 	}
 	rf->init_hw = rf2959_init_hw;
 	rf->set_channel = rf2959_set_channel;
 	rf->switch_radio_on = rf2959_switch_radio_on;
 	rf->switch_radio_off = rf2959_switch_radio_off;
 	return 0;
 }
	/* zd_rf_rfmd.c: Functions for the RFMD RF controller
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*/

	#include <linux/kernel.h>

	#include "zd_rf.h"
	#include "zd_usb.h"
	#include "zd_chip.h"

	static const u32 rf2959_table[][2] = {
	RF_CHANNEL( 1) = { 0x181979, 0x1e6666 },
	RF_CHANNEL( 2) = { 0x181989, 0x1e6666 },
	RF_CHANNEL( 3) = { 0x181999, 0x1e6666 },
	RF_CHANNEL( 4) = { 0x1819a9, 0x1e6666 },
	RF_CHANNEL( 5) = { 0x1819b9, 0x1e6666 },
	RF_CHANNEL( 6) = { 0x1819c9, 0x1e6666 },
	RF_CHANNEL( 7) = { 0x1819d9, 0x1e6666 },
	RF_CHANNEL( 8) = { 0x1819e9, 0x1e6666 },
	RF_CHANNEL( 9) = { 0x1819f9, 0x1e6666 },
	RF_CHANNEL(10) = { 0x181a09, 0x1e6666 },
	RF_CHANNEL(11) = { 0x181a19, 0x1e6666 },
	RF_CHANNEL(12) = { 0x181a29, 0x1e6666 },
	RF_CHANNEL(13) = { 0x181a39, 0x1e6666 },
	RF_CHANNEL(14) = { 0x181a60, 0x1c0000 },
	};

	#if 0
	static int bits(u32 rw, int from, int to)
	{
	rw &= ~(0xffffffffU << (to+1));
	rw >>= from;
	return rw;
	}

	static int bit(u32 rw, int bit)
	{
	return bits(rw, bit, bit);
	}

	static void dump_regwrite(u32 rw)
	{
	int reg = bits(rw, 18, 22);
	int rw_flag = bits(rw, 23, 23);
	PDEBUG("rf2959 %#010x reg %d rw %d", rw, reg, rw_flag);

	switch (reg) {
	case 0:
	PDEBUG("reg0 CFG1 ref_sel %d hybernate %d rf_vco_reg_en %d"
	" if_vco_reg_en %d if_vga_en %d",
	bits(rw, 14, 15), bit(rw, 3), bit(rw, 2), bit(rw, 1),
	bit(rw, 0));
	break;
	case 1:
	PDEBUG("reg1 IFPLL1 pll_en1 %d kv_en1 %d vtc_en1 %d lpf1 %d"
	" cpl1 %d pdp1 %d autocal_en1 %d ld_en1 %d ifloopr %d"
	" ifloopc %d dac1 %d",
	bit(rw, 17), bit(rw, 16), bit(rw, 15), bit(rw, 14),
	bit(rw, 13), bit(rw, 12), bit(rw, 11), bit(rw, 10),
	bits(rw, 7, 9), bits(rw, 4, 6), bits(rw, 0, 3));
	break;
	case 2:
	PDEBUG("reg2 IFPLL2 n1 %d num1 %d",
	bits(rw, 6, 17), bits(rw, 0, 5));
	break;
	case 3:
	PDEBUG("reg3 IFPLL3 num %d", bits(rw, 0, 17));
	break;
	case 4:
	PDEBUG("reg4 IFPLL4 dn1 %#04x ct_def1 %d kv_def1 %d",
	bits(rw, 8, 16), bits(rw, 4, 7), bits(rw, 0, 3));
	break;
	case 5:
	PDEBUG("reg5 RFPLL1 pll_en %d kv_en %d vtc_en %d lpf %d cpl %d"
	" pdp %d autocal_en %d ld_en %d rfloopr %d rfloopc %d"
	" dac %d",
	bit(rw, 17), bit(rw, 16), bit(rw, 15), bit(rw, 14),
	bit(rw, 13), bit(rw, 12), bit(rw, 11), bit(rw, 10),
	bits(rw, 7, 9), bits(rw, 4, 6), bits(rw, 0,3));
	break;
	case 6:
	PDEBUG("reg6 RFPLL2 n %d num %d",
	bits(rw, 6, 17), bits(rw, 0, 5));
	break;
	case 7:
	PDEBUG("reg7 RFPLL3 num2 %d", bits(rw, 0, 17));
	break;
	case 8:
	PDEBUG("reg8 RFPLL4 dn %#06x ct_def %d kv_def %d",
	bits(rw, 8, 16), bits(rw, 4, 7), bits(rw, 0, 3));
	break;
	case 9:
	PDEBUG("reg9 CAL1 tvco %d tlock %d m_ct_value %d ld_window %d",
	bits(rw, 13, 17), bits(rw, 8, 12), bits(rw, 3, 7),
	bits(rw, 0, 2));
	break;
	case 10:
	PDEBUG("reg10 TXRX1 rxdcfbbyps %d pcontrol %d txvgc %d"
	" rxlpfbw %d txlpfbw %d txdiffmode %d txenmode %d"
	" intbiasen %d tybypass %d",
	bit(rw, 17), bits(rw, 15, 16), bits(rw, 10, 14),
	bits(rw, 7, 9), bits(rw, 4, 6), bit(rw, 3), bit(rw, 2),
	bit(rw, 1), bit(rw, 0));
	break;
	case 11:
	PDEBUG("reg11 PCNT1 mid_bias %d p_desired %d pc_offset %d"
	" tx_delay %d",
	bits(rw, 15, 17), bits(rw, 9, 14), bits(rw, 3, 8),
	bits(rw, 0, 2));
	break;
	case 12:
	PDEBUG("reg12 PCNT2 max_power %d mid_power %d min_power %d",
	bits(rw, 12, 17), bits(rw, 6, 11), bits(rw, 0, 5));
	break;
	case 13:
	PDEBUG("reg13 VCOT1 rfpll vco comp %d ifpll vco comp %d"
	" lobias %d if_biasbuf %d if_biasvco %d rf_biasbuf %d"
	" rf_biasvco %d",
	bit(rw, 17), bit(rw, 16), bit(rw, 15),
	bits(rw, 8, 9), bits(rw, 5, 7), bits(rw, 3, 4),
	bits(rw, 0, 2));
	break;
	case 14:
	PDEBUG("reg14 IQCAL rx_acal %d rx_pcal %d"
	" tx_acal %d tx_pcal %d",
	bits(rw, 13, 17), bits(rw, 9, 12), bits(rw, 4, 8),
	bits(rw, 0, 3));
	break;
	}
	}
	#endif /* 0 */

	static int rf2959_init_hw(struct zd_rf *rf)
	{
	int r;
	struct zd_chip *chip = zd_rf_to_chip(rf);

	static const struct zd_ioreq16 ioreqs[] = {
	{ CR2, 0x1E }, { CR9, 0x20 }, { CR10, 0x89 },
	{ CR11, 0x00 }, { CR15, 0xD0 }, { CR17, 0x68 },
	{ CR19, 0x4a }, { CR20, 0x0c }, { CR21, 0x0E },
	{ CR23, 0x48 },
	/* normal size for cca threshold */
	{ CR24, 0x14 },
	/* { CR24, 0x20 }, */
	{ CR26, 0x90 }, { CR27, 0x30 }, { CR29, 0x20 },
	{ CR31, 0xb2 }, { CR32, 0x43 }, { CR33, 0x28 },
	{ CR38, 0x30 }, { CR34, 0x0f }, { CR35, 0xF0 },
	{ CR41, 0x2a }, { CR46, 0x7F }, { CR47, 0x1E },
	{ CR51, 0xc5 }, { CR52, 0xc5 }, { CR53, 0xc5 },
	{ CR79, 0x58 }, { CR80, 0x30 }, { CR81, 0x30 },
	{ CR82, 0x00 }, { CR83, 0x24 }, { CR84, 0x04 },
	{ CR85, 0x00 }, { CR86, 0x10 }, { CR87, 0x2A },
	{ CR88, 0x10 }, { CR89, 0x24 }, { CR90, 0x18 },
	/* { CR91, 0x18 }, */
	/* should solve continous CTS frame problems */
	{ CR91, 0x00 },
	{ CR92, 0x0a }, { CR93, 0x00 }, { CR94, 0x01 },
	{ CR95, 0x00 }, { CR96, 0x40 }, { CR97, 0x37 },
	{ CR98, 0x05 }, { CR99, 0x28 }, { CR100, 0x00 },
	{ CR101, 0x13 }, { CR102, 0x27 }, { CR103, 0x27 },
	{ CR104, 0x18 }, { CR105, 0x12 },
	/* normal size */
	{ CR106, 0x1a },
	/* { CR106, 0x22 }, */
	{ CR107, 0x24 }, { CR108, 0x0a }, { CR109, 0x13 },
	{ CR110, 0x2F }, { CR111, 0x27 }, { CR112, 0x27 },
	{ CR113, 0x27 }, { CR114, 0x27 }, { CR115, 0x40 },
	{ CR116, 0x40 }, { CR117, 0xF0 }, { CR118, 0xF0 },
	{ CR119, 0x16 },
	/* no TX continuation */
	{ CR122, 0x00 },
	/* { CR122, 0xff }, */
	{ CR127, 0x03 }, { CR131, 0x08 }, { CR138, 0x28 },
	{ CR148, 0x44 }, { CR150, 0x10 }, { CR169, 0xBB },
	{ CR170, 0xBB },
	};

	static const u32 rv[] = {
	0x000007, /* REG0(CFG1) */
	0x07dd43, /* REG1(IFPLL1) */
	0x080959, /* REG2(IFPLL2) */
	0x0e6666,
	0x116a57, /* REG4 */
	0x17dd43, /* REG5 */
	0x1819f9, /* REG6 */
	0x1e6666,
	0x214554,
	0x25e7fa,
	0x27fffa,
	/* The Zydas driver somehow forgets to set this value. It's
	* only set for Japan. We are using internal power control
	* for now.
	*/
	0x294128, /* internal power */
	/* 0x28252c, / / External control TX power */
	/* CR31_CCK, CR51_6-36M, CR52_48M, CR53_54M */
	0x2c0000,
	0x300000,
	0x340000, /* REG13(0xD) */
	0x381e0f, /* REG14(0xE) */
	/* Bogus, RF2959's data sheet doesn't know register 27, which is
	* actually referenced here. The commented 0x11 is 17.
	*/
	0x6c180f, /* REG27(0x11) */
	};

	r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
	if (r)
	return r;

	return zd_rfwritev_locked(chip, rv, ARRAY_SIZE(rv), RF_RV_BITS);
	}

	static int rf2959_set_channel(struct zd_rf *rf, u8 channel)
	{
	int i, r;
	const u32 *rv = rf2959_table[channel-1];
	struct zd_chip *chip = zd_rf_to_chip(rf);

	for (i = 0; i < 2; i++) {
	r = zd_rfwrite_locked(chip, rv[i], RF_RV_BITS);
	if (r)
	return r;
	}
	return 0;
	}

	static int rf2959_switch_radio_on(struct zd_rf *rf)
	{
	static const struct zd_ioreq16 ioreqs[] = {
	{ CR10, 0x89 },
	{ CR11, 0x00 },
	};
	struct zd_chip *chip = zd_rf_to_chip(rf);

	return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
	}

	static int rf2959_switch_radio_off(struct zd_rf *rf)
	{
	static const struct zd_ioreq16 ioreqs[] = {
	{ CR10, 0x15 },
	{ CR11, 0x81 },
	};
	struct zd_chip *chip = zd_rf_to_chip(rf);

	return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
	}

	int zd_rf_init_rf2959(struct zd_rf *rf)
	{
	struct zd_chip *chip = zd_rf_to_chip(rf);

	if (zd_chip_is_zd1211b(chip)) {
	dev_err(zd_chip_dev(chip),
	"RF2959 is currently not supported for ZD1211B"
	" devices\n");
	return -ENODEV;
	}
	rf->init_hw = rf2959_init_hw;
	rf->set_channel = rf2959_set_channel;
	rf->switch_radio_on = rf2959_switch_radio_on;
	rf->switch_radio_off = rf2959_switch_radio_off;
	return 0;
	}