| #ifndef __ASM_SPINLOCK_H |
| #define __ASM_SPINLOCK_H |
| |
| #if __LINUX_ARM_ARCH__ < 6 |
| #error SMP not supported on pre-ARMv6 CPUs |
| #endif |
| |
| #include <asm/processor.h> |
| |
| /* |
| * sev and wfe are ARMv6K extensions. Uniprocessor ARMv6 may not have the K |
| * extensions, so when running on UP, we have to patch these instructions away. |
| */ |
| #define ALT_SMP(smp, up) \ |
| "9998: " smp "\n" \ |
| " .pushsection \".alt.smp.init\", \"a\"\n" \ |
| " .long 9998b\n" \ |
| " " up "\n" \ |
| " .popsection\n" |
| |
| #ifdef CONFIG_THUMB2_KERNEL |
| #define SEV ALT_SMP("sev.w", "nop.w") |
| /* |
| * For Thumb-2, special care is needed to ensure that the conditional WFE |
| * instruction really does assemble to exactly 4 bytes (as required by |
| * the SMP_ON_UP fixup code). By itself "wfene" might cause the |
| * assembler to insert a extra (16-bit) IT instruction, depending on the |
| * presence or absence of neighbouring conditional instructions. |
| * |
| * To avoid this unpredictableness, an approprite IT is inserted explicitly: |
| * the assembler won't change IT instructions which are explicitly present |
| * in the input. |
| */ |
| #define WFE(cond) ALT_SMP( \ |
| "it " cond "\n\t" \ |
| "wfe" cond ".n", \ |
| \ |
| "nop.w" \ |
| ) |
| #else |
| #define SEV ALT_SMP("sev", "nop") |
| #define WFE(cond) ALT_SMP("wfe" cond, "nop") |
| #endif |
| |
| static inline void dsb_sev(void) |
| { |
| #if __LINUX_ARM_ARCH__ >= 7 |
| __asm__ __volatile__ ( |
| "dsb ishst\n" |
| SEV |
| ); |
| #else |
| __asm__ __volatile__ ( |
| "mcr p15, 0, %0, c7, c10, 4\n" |
| SEV |
| : : "r" (0) |
| ); |
| #endif |
| } |
| |
| /* |
| * ARMv6 ticket-based spin-locking. |
| * |
| * A memory barrier is required after we get a lock, and before we |
| * release it, because V6 CPUs are assumed to have weakly ordered |
| * memory. |
| */ |
| |
| #define arch_spin_unlock_wait(lock) \ |
| do { while (arch_spin_is_locked(lock)) cpu_relax(); } while (0) |
| |
| #define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock) |
| |
| static inline void arch_spin_lock(arch_spinlock_t *lock) |
| { |
| unsigned long tmp; |
| u32 newval; |
| arch_spinlock_t lockval; |
| |
| __asm__ __volatile__( |
| "1: ldrex %0, [%3]\n" |
| " add %1, %0, %4\n" |
| " strex %2, %1, [%3]\n" |
| " teq %2, #0\n" |
| " bne 1b" |
| : "=&r" (lockval), "=&r" (newval), "=&r" (tmp) |
| : "r" (&lock->slock), "I" (1 << TICKET_SHIFT) |
| : "cc"); |
| |
| while (lockval.tickets.next != lockval.tickets.owner) { |
| wfe(); |
| lockval.tickets.owner = ACCESS_ONCE(lock->tickets.owner); |
| } |
| |
| smp_mb(); |
| } |
| |
| static inline int arch_spin_trylock(arch_spinlock_t *lock) |
| { |
| unsigned long contended, res; |
| u32 slock; |
| |
| do { |
| __asm__ __volatile__( |
| " ldrex %0, [%3]\n" |
| " mov %2, #0\n" |
| " subs %1, %0, %0, ror #16\n" |
| " addeq %0, %0, %4\n" |
| " strexeq %2, %0, [%3]" |
| : "=&r" (slock), "=&r" (contended), "=&r" (res) |
| : "r" (&lock->slock), "I" (1 << TICKET_SHIFT) |
| : "cc"); |
| } while (res); |
| |
| if (!contended) { |
| smp_mb(); |
| return 1; |
| } else { |
| return 0; |
| } |
| } |
| |
| static inline void arch_spin_unlock(arch_spinlock_t *lock) |
| { |
| smp_mb(); |
| lock->tickets.owner++; |
| dsb_sev(); |
| } |
| |
| static inline int arch_spin_value_unlocked(arch_spinlock_t lock) |
| { |
| return lock.tickets.owner == lock.tickets.next; |
| } |
| |
| static inline int arch_spin_is_locked(arch_spinlock_t *lock) |
| { |
| return !arch_spin_value_unlocked(ACCESS_ONCE(*lock)); |
| } |
| |
| static inline int arch_spin_is_contended(arch_spinlock_t *lock) |
| { |
| struct __raw_tickets tickets = ACCESS_ONCE(lock->tickets); |
| return (tickets.next - tickets.owner) > 1; |
| } |
| #define arch_spin_is_contended arch_spin_is_contended |
| |
| /* |
| * RWLOCKS |
| * |
| * |
| * Write locks are easy - we just set bit 31. When unlocking, we can |
| * just write zero since the lock is exclusively held. |
| */ |
| |
| static inline void arch_write_lock(arch_rwlock_t *rw) |
| { |
| unsigned long tmp; |
| |
| __asm__ __volatile__( |
| "1: ldrex %0, [%1]\n" |
| " teq %0, #0\n" |
| WFE("ne") |
| " strexeq %0, %2, [%1]\n" |
| " teq %0, #0\n" |
| " bne 1b" |
| : "=&r" (tmp) |
| : "r" (&rw->lock), "r" (0x80000000) |
| : "cc"); |
| |
| smp_mb(); |
| } |
| |
| static inline int arch_write_trylock(arch_rwlock_t *rw) |
| { |
| unsigned long contended, res; |
| |
| do { |
| __asm__ __volatile__( |
| " ldrex %0, [%2]\n" |
| " mov %1, #0\n" |
| " teq %0, #0\n" |
| " strexeq %1, %3, [%2]" |
| : "=&r" (contended), "=&r" (res) |
| : "r" (&rw->lock), "r" (0x80000000) |
| : "cc"); |
| } while (res); |
| |
| if (!contended) { |
| smp_mb(); |
| return 1; |
| } else { |
| return 0; |
| } |
| } |
| |
| static inline void arch_write_unlock(arch_rwlock_t *rw) |
| { |
| smp_mb(); |
| |
| __asm__ __volatile__( |
| "str %1, [%0]\n" |
| : |
| : "r" (&rw->lock), "r" (0) |
| : "cc"); |
| |
| dsb_sev(); |
| } |
| |
| /* write_can_lock - would write_trylock() succeed? */ |
| #define arch_write_can_lock(x) ((x)->lock == 0) |
| |
| /* |
| * Read locks are a bit more hairy: |
| * - Exclusively load the lock value. |
| * - Increment it. |
| * - Store new lock value if positive, and we still own this location. |
| * If the value is negative, we've already failed. |
| * - If we failed to store the value, we want a negative result. |
| * - If we failed, try again. |
| * Unlocking is similarly hairy. We may have multiple read locks |
| * currently active. However, we know we won't have any write |
| * locks. |
| */ |
| static inline void arch_read_lock(arch_rwlock_t *rw) |
| { |
| unsigned long tmp, tmp2; |
| |
| __asm__ __volatile__( |
| "1: ldrex %0, [%2]\n" |
| " adds %0, %0, #1\n" |
| " strexpl %1, %0, [%2]\n" |
| WFE("mi") |
| " rsbpls %0, %1, #0\n" |
| " bmi 1b" |
| : "=&r" (tmp), "=&r" (tmp2) |
| : "r" (&rw->lock) |
| : "cc"); |
| |
| smp_mb(); |
| } |
| |
| static inline void arch_read_unlock(arch_rwlock_t *rw) |
| { |
| unsigned long tmp, tmp2; |
| |
| smp_mb(); |
| |
| __asm__ __volatile__( |
| "1: ldrex %0, [%2]\n" |
| " sub %0, %0, #1\n" |
| " strex %1, %0, [%2]\n" |
| " teq %1, #0\n" |
| " bne 1b" |
| : "=&r" (tmp), "=&r" (tmp2) |
| : "r" (&rw->lock) |
| : "cc"); |
| |
| if (tmp == 0) |
| dsb_sev(); |
| } |
| |
| static inline int arch_read_trylock(arch_rwlock_t *rw) |
| { |
| unsigned long contended, res; |
| |
| do { |
| __asm__ __volatile__( |
| " ldrex %0, [%2]\n" |
| " mov %1, #0\n" |
| " adds %0, %0, #1\n" |
| " strexpl %1, %0, [%2]" |
| : "=&r" (contended), "=&r" (res) |
| : "r" (&rw->lock) |
| : "cc"); |
| } while (res); |
| |
| /* If the lock is negative, then it is already held for write. */ |
| if (contended < 0x80000000) { |
| smp_mb(); |
| return 1; |
| } else { |
| return 0; |
| } |
| } |
| |
| /* read_can_lock - would read_trylock() succeed? */ |
| #define arch_read_can_lock(x) ((x)->lock < 0x80000000) |
| |
| #define arch_read_lock_flags(lock, flags) arch_read_lock(lock) |
| #define arch_write_lock_flags(lock, flags) arch_write_lock(lock) |
| |
| #define arch_spin_relax(lock) cpu_relax() |
| #define arch_read_relax(lock) cpu_relax() |
| #define arch_write_relax(lock) cpu_relax() |
| |
| #endif /* __ASM_SPINLOCK_H */ |