| /* |
| * Copyright (c) 2009, Microsoft Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., 59 Temple |
| * Place - Suite 330, Boston, MA 02111-1307 USA. |
| * |
| * Authors: |
| * Haiyang Zhang <haiyangz@microsoft.com> |
| * Hank Janssen <hjanssen@microsoft.com> |
| * K. Y. Srinivasan <kys@microsoft.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/wait.h> |
| #include <linux/sched.h> |
| #include <linux/completion.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/hyperv.h> |
| #include <linux/mempool.h> |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_tcq.h> |
| #include <scsi/scsi_eh.h> |
| #include <scsi/scsi_devinfo.h> |
| #include <scsi/scsi_dbg.h> |
| |
| /* |
| * All wire protocol details (storage protocol between the guest and the host) |
| * are consolidated here. |
| * |
| * Begin protocol definitions. |
| */ |
| |
| /* |
| * Version history: |
| * V1 Beta: 0.1 |
| * V1 RC < 2008/1/31: 1.0 |
| * V1 RC > 2008/1/31: 2.0 |
| * Win7: 4.2 |
| */ |
| |
| #define VMSTOR_CURRENT_MAJOR 4 |
| #define VMSTOR_CURRENT_MINOR 2 |
| |
| |
| /* Packet structure describing virtual storage requests. */ |
| enum vstor_packet_operation { |
| VSTOR_OPERATION_COMPLETE_IO = 1, |
| VSTOR_OPERATION_REMOVE_DEVICE = 2, |
| VSTOR_OPERATION_EXECUTE_SRB = 3, |
| VSTOR_OPERATION_RESET_LUN = 4, |
| VSTOR_OPERATION_RESET_ADAPTER = 5, |
| VSTOR_OPERATION_RESET_BUS = 6, |
| VSTOR_OPERATION_BEGIN_INITIALIZATION = 7, |
| VSTOR_OPERATION_END_INITIALIZATION = 8, |
| VSTOR_OPERATION_QUERY_PROTOCOL_VERSION = 9, |
| VSTOR_OPERATION_QUERY_PROPERTIES = 10, |
| VSTOR_OPERATION_ENUMERATE_BUS = 11, |
| VSTOR_OPERATION_MAXIMUM = 11 |
| }; |
| |
| /* |
| * Platform neutral description of a scsi request - |
| * this remains the same across the write regardless of 32/64 bit |
| * note: it's patterned off the SCSI_PASS_THROUGH structure |
| */ |
| #define STORVSC_MAX_CMD_LEN 0x10 |
| #define STORVSC_SENSE_BUFFER_SIZE 0x12 |
| #define STORVSC_MAX_BUF_LEN_WITH_PADDING 0x14 |
| |
| struct vmscsi_request { |
| u16 length; |
| u8 srb_status; |
| u8 scsi_status; |
| |
| u8 port_number; |
| u8 path_id; |
| u8 target_id; |
| u8 lun; |
| |
| u8 cdb_length; |
| u8 sense_info_length; |
| u8 data_in; |
| u8 reserved; |
| |
| u32 data_transfer_length; |
| |
| union { |
| u8 cdb[STORVSC_MAX_CMD_LEN]; |
| u8 sense_data[STORVSC_SENSE_BUFFER_SIZE]; |
| u8 reserved_array[STORVSC_MAX_BUF_LEN_WITH_PADDING]; |
| }; |
| } __attribute((packed)); |
| |
| |
| /* |
| * This structure is sent during the intialization phase to get the different |
| * properties of the channel. |
| */ |
| struct vmstorage_channel_properties { |
| u16 protocol_version; |
| u8 path_id; |
| u8 target_id; |
| |
| /* Note: port number is only really known on the client side */ |
| u32 port_number; |
| u32 flags; |
| u32 max_transfer_bytes; |
| |
| /* |
| * This id is unique for each channel and will correspond with |
| * vendor specific data in the inquiry data. |
| */ |
| |
| u64 unique_id; |
| } __packed; |
| |
| /* This structure is sent during the storage protocol negotiations. */ |
| struct vmstorage_protocol_version { |
| /* Major (MSW) and minor (LSW) version numbers. */ |
| u16 major_minor; |
| |
| /* |
| * Revision number is auto-incremented whenever this file is changed |
| * (See FILL_VMSTOR_REVISION macro above). Mismatch does not |
| * definitely indicate incompatibility--but it does indicate mismatched |
| * builds. |
| * This is only used on the windows side. Just set it to 0. |
| */ |
| u16 revision; |
| } __packed; |
| |
| /* Channel Property Flags */ |
| #define STORAGE_CHANNEL_REMOVABLE_FLAG 0x1 |
| #define STORAGE_CHANNEL_EMULATED_IDE_FLAG 0x2 |
| |
| struct vstor_packet { |
| /* Requested operation type */ |
| enum vstor_packet_operation operation; |
| |
| /* Flags - see below for values */ |
| u32 flags; |
| |
| /* Status of the request returned from the server side. */ |
| u32 status; |
| |
| /* Data payload area */ |
| union { |
| /* |
| * Structure used to forward SCSI commands from the |
| * client to the server. |
| */ |
| struct vmscsi_request vm_srb; |
| |
| /* Structure used to query channel properties. */ |
| struct vmstorage_channel_properties storage_channel_properties; |
| |
| /* Used during version negotiations. */ |
| struct vmstorage_protocol_version version; |
| }; |
| } __packed; |
| |
| /* |
| * Packet Flags: |
| * |
| * This flag indicates that the server should send back a completion for this |
| * packet. |
| */ |
| |
| #define REQUEST_COMPLETION_FLAG 0x1 |
| |
| /* Matches Windows-end */ |
| enum storvsc_request_type { |
| WRITE_TYPE = 0, |
| READ_TYPE, |
| UNKNOWN_TYPE, |
| }; |
| |
| /* |
| * SRB status codes and masks; a subset of the codes used here. |
| */ |
| |
| #define SRB_STATUS_AUTOSENSE_VALID 0x80 |
| #define SRB_STATUS_INVALID_LUN 0x20 |
| #define SRB_STATUS_SUCCESS 0x01 |
| #define SRB_STATUS_ERROR 0x04 |
| |
| /* |
| * This is the end of Protocol specific defines. |
| */ |
| |
| |
| /* |
| * We setup a mempool to allocate request structures for this driver |
| * on a per-lun basis. The following define specifies the number of |
| * elements in the pool. |
| */ |
| |
| #define STORVSC_MIN_BUF_NR 64 |
| static int storvsc_ringbuffer_size = (20 * PAGE_SIZE); |
| |
| module_param(storvsc_ringbuffer_size, int, S_IRUGO); |
| MODULE_PARM_DESC(storvsc_ringbuffer_size, "Ring buffer size (bytes)"); |
| |
| #define STORVSC_MAX_IO_REQUESTS 128 |
| |
| /* |
| * In Hyper-V, each port/path/target maps to 1 scsi host adapter. In |
| * reality, the path/target is not used (ie always set to 0) so our |
| * scsi host adapter essentially has 1 bus with 1 target that contains |
| * up to 256 luns. |
| */ |
| #define STORVSC_MAX_LUNS_PER_TARGET 64 |
| #define STORVSC_MAX_TARGETS 1 |
| #define STORVSC_MAX_CHANNELS 1 |
| |
| |
| |
| struct storvsc_cmd_request { |
| struct list_head entry; |
| struct scsi_cmnd *cmd; |
| |
| unsigned int bounce_sgl_count; |
| struct scatterlist *bounce_sgl; |
| |
| struct hv_device *device; |
| |
| /* Synchronize the request/response if needed */ |
| struct completion wait_event; |
| |
| unsigned char *sense_buffer; |
| struct hv_multipage_buffer data_buffer; |
| struct vstor_packet vstor_packet; |
| }; |
| |
| |
| /* A storvsc device is a device object that contains a vmbus channel */ |
| struct storvsc_device { |
| struct hv_device *device; |
| |
| bool destroy; |
| bool drain_notify; |
| atomic_t num_outstanding_req; |
| struct Scsi_Host *host; |
| |
| wait_queue_head_t waiting_to_drain; |
| |
| /* |
| * Each unique Port/Path/Target represents 1 channel ie scsi |
| * controller. In reality, the pathid, targetid is always 0 |
| * and the port is set by us |
| */ |
| unsigned int port_number; |
| unsigned char path_id; |
| unsigned char target_id; |
| |
| /* Used for vsc/vsp channel reset process */ |
| struct storvsc_cmd_request init_request; |
| struct storvsc_cmd_request reset_request; |
| }; |
| |
| struct stor_mem_pools { |
| struct kmem_cache *request_pool; |
| mempool_t *request_mempool; |
| }; |
| |
| struct hv_host_device { |
| struct hv_device *dev; |
| unsigned int port; |
| unsigned char path; |
| unsigned char target; |
| }; |
| |
| struct storvsc_scan_work { |
| struct work_struct work; |
| struct Scsi_Host *host; |
| uint lun; |
| }; |
| |
| static void storvsc_bus_scan(struct work_struct *work) |
| { |
| struct storvsc_scan_work *wrk; |
| int id, order_id; |
| |
| wrk = container_of(work, struct storvsc_scan_work, work); |
| for (id = 0; id < wrk->host->max_id; ++id) { |
| if (wrk->host->reverse_ordering) |
| order_id = wrk->host->max_id - id - 1; |
| else |
| order_id = id; |
| |
| scsi_scan_target(&wrk->host->shost_gendev, 0, |
| order_id, SCAN_WILD_CARD, 1); |
| } |
| kfree(wrk); |
| } |
| |
| static void storvsc_remove_lun(struct work_struct *work) |
| { |
| struct storvsc_scan_work *wrk; |
| struct scsi_device *sdev; |
| |
| wrk = container_of(work, struct storvsc_scan_work, work); |
| if (!scsi_host_get(wrk->host)) |
| goto done; |
| |
| sdev = scsi_device_lookup(wrk->host, 0, 0, wrk->lun); |
| |
| if (sdev) { |
| scsi_remove_device(sdev); |
| scsi_device_put(sdev); |
| } |
| scsi_host_put(wrk->host); |
| |
| done: |
| kfree(wrk); |
| } |
| |
| /* |
| * Major/minor macros. Minor version is in LSB, meaning that earlier flat |
| * version numbers will be interpreted as "0.x" (i.e., 1 becomes 0.1). |
| */ |
| |
| static inline u16 storvsc_get_version(u8 major, u8 minor) |
| { |
| u16 version; |
| |
| version = ((major << 8) | minor); |
| return version; |
| } |
| |
| /* |
| * We can get incoming messages from the host that are not in response to |
| * messages that we have sent out. An example of this would be messages |
| * received by the guest to notify dynamic addition/removal of LUNs. To |
| * deal with potential race conditions where the driver may be in the |
| * midst of being unloaded when we might receive an unsolicited message |
| * from the host, we have implemented a mechanism to gurantee sequential |
| * consistency: |
| * |
| * 1) Once the device is marked as being destroyed, we will fail all |
| * outgoing messages. |
| * 2) We permit incoming messages when the device is being destroyed, |
| * only to properly account for messages already sent out. |
| */ |
| |
| static inline struct storvsc_device *get_out_stor_device( |
| struct hv_device *device) |
| { |
| struct storvsc_device *stor_device; |
| |
| stor_device = hv_get_drvdata(device); |
| |
| if (stor_device && stor_device->destroy) |
| stor_device = NULL; |
| |
| return stor_device; |
| } |
| |
| |
| static inline void storvsc_wait_to_drain(struct storvsc_device *dev) |
| { |
| dev->drain_notify = true; |
| wait_event(dev->waiting_to_drain, |
| atomic_read(&dev->num_outstanding_req) == 0); |
| dev->drain_notify = false; |
| } |
| |
| static inline struct storvsc_device *get_in_stor_device( |
| struct hv_device *device) |
| { |
| struct storvsc_device *stor_device; |
| |
| stor_device = hv_get_drvdata(device); |
| |
| if (!stor_device) |
| goto get_in_err; |
| |
| /* |
| * If the device is being destroyed; allow incoming |
| * traffic only to cleanup outstanding requests. |
| */ |
| |
| if (stor_device->destroy && |
| (atomic_read(&stor_device->num_outstanding_req) == 0)) |
| stor_device = NULL; |
| |
| get_in_err: |
| return stor_device; |
| |
| } |
| |
| static void destroy_bounce_buffer(struct scatterlist *sgl, |
| unsigned int sg_count) |
| { |
| int i; |
| struct page *page_buf; |
| |
| for (i = 0; i < sg_count; i++) { |
| page_buf = sg_page((&sgl[i])); |
| if (page_buf != NULL) |
| __free_page(page_buf); |
| } |
| |
| kfree(sgl); |
| } |
| |
| static int do_bounce_buffer(struct scatterlist *sgl, unsigned int sg_count) |
| { |
| int i; |
| |
| /* No need to check */ |
| if (sg_count < 2) |
| return -1; |
| |
| /* We have at least 2 sg entries */ |
| for (i = 0; i < sg_count; i++) { |
| if (i == 0) { |
| /* make sure 1st one does not have hole */ |
| if (sgl[i].offset + sgl[i].length != PAGE_SIZE) |
| return i; |
| } else if (i == sg_count - 1) { |
| /* make sure last one does not have hole */ |
| if (sgl[i].offset != 0) |
| return i; |
| } else { |
| /* make sure no hole in the middle */ |
| if (sgl[i].length != PAGE_SIZE || sgl[i].offset != 0) |
| return i; |
| } |
| } |
| return -1; |
| } |
| |
| static struct scatterlist *create_bounce_buffer(struct scatterlist *sgl, |
| unsigned int sg_count, |
| unsigned int len, |
| int write) |
| { |
| int i; |
| int num_pages; |
| struct scatterlist *bounce_sgl; |
| struct page *page_buf; |
| unsigned int buf_len = ((write == WRITE_TYPE) ? 0 : PAGE_SIZE); |
| |
| num_pages = ALIGN(len, PAGE_SIZE) >> PAGE_SHIFT; |
| |
| bounce_sgl = kcalloc(num_pages, sizeof(struct scatterlist), GFP_ATOMIC); |
| if (!bounce_sgl) |
| return NULL; |
| |
| for (i = 0; i < num_pages; i++) { |
| page_buf = alloc_page(GFP_ATOMIC); |
| if (!page_buf) |
| goto cleanup; |
| sg_set_page(&bounce_sgl[i], page_buf, buf_len, 0); |
| } |
| |
| return bounce_sgl; |
| |
| cleanup: |
| destroy_bounce_buffer(bounce_sgl, num_pages); |
| return NULL; |
| } |
| |
| /* Disgusting wrapper functions */ |
| static inline unsigned long sg_kmap_atomic(struct scatterlist *sgl, int idx) |
| { |
| void *addr = kmap_atomic(sg_page(sgl + idx)); |
| return (unsigned long)addr; |
| } |
| |
| static inline void sg_kunmap_atomic(unsigned long addr) |
| { |
| kunmap_atomic((void *)addr); |
| } |
| |
| |
| /* Assume the original sgl has enough room */ |
| static unsigned int copy_from_bounce_buffer(struct scatterlist *orig_sgl, |
| struct scatterlist *bounce_sgl, |
| unsigned int orig_sgl_count, |
| unsigned int bounce_sgl_count) |
| { |
| int i; |
| int j = 0; |
| unsigned long src, dest; |
| unsigned int srclen, destlen, copylen; |
| unsigned int total_copied = 0; |
| unsigned long bounce_addr = 0; |
| unsigned long dest_addr = 0; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| for (i = 0; i < orig_sgl_count; i++) { |
| dest_addr = sg_kmap_atomic(orig_sgl,i) + orig_sgl[i].offset; |
| dest = dest_addr; |
| destlen = orig_sgl[i].length; |
| |
| if (bounce_addr == 0) |
| bounce_addr = sg_kmap_atomic(bounce_sgl,j); |
| |
| while (destlen) { |
| src = bounce_addr + bounce_sgl[j].offset; |
| srclen = bounce_sgl[j].length - bounce_sgl[j].offset; |
| |
| copylen = min(srclen, destlen); |
| memcpy((void *)dest, (void *)src, copylen); |
| |
| total_copied += copylen; |
| bounce_sgl[j].offset += copylen; |
| destlen -= copylen; |
| dest += copylen; |
| |
| if (bounce_sgl[j].offset == bounce_sgl[j].length) { |
| /* full */ |
| sg_kunmap_atomic(bounce_addr); |
| j++; |
| |
| /* |
| * It is possible that the number of elements |
| * in the bounce buffer may not be equal to |
| * the number of elements in the original |
| * scatter list. Handle this correctly. |
| */ |
| |
| if (j == bounce_sgl_count) { |
| /* |
| * We are done; cleanup and return. |
| */ |
| sg_kunmap_atomic(dest_addr - orig_sgl[i].offset); |
| local_irq_restore(flags); |
| return total_copied; |
| } |
| |
| /* if we need to use another bounce buffer */ |
| if (destlen || i != orig_sgl_count - 1) |
| bounce_addr = sg_kmap_atomic(bounce_sgl,j); |
| } else if (destlen == 0 && i == orig_sgl_count - 1) { |
| /* unmap the last bounce that is < PAGE_SIZE */ |
| sg_kunmap_atomic(bounce_addr); |
| } |
| } |
| |
| sg_kunmap_atomic(dest_addr - orig_sgl[i].offset); |
| } |
| |
| local_irq_restore(flags); |
| |
| return total_copied; |
| } |
| |
| /* Assume the bounce_sgl has enough room ie using the create_bounce_buffer() */ |
| static unsigned int copy_to_bounce_buffer(struct scatterlist *orig_sgl, |
| struct scatterlist *bounce_sgl, |
| unsigned int orig_sgl_count) |
| { |
| int i; |
| int j = 0; |
| unsigned long src, dest; |
| unsigned int srclen, destlen, copylen; |
| unsigned int total_copied = 0; |
| unsigned long bounce_addr = 0; |
| unsigned long src_addr = 0; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| for (i = 0; i < orig_sgl_count; i++) { |
| src_addr = sg_kmap_atomic(orig_sgl,i) + orig_sgl[i].offset; |
| src = src_addr; |
| srclen = orig_sgl[i].length; |
| |
| if (bounce_addr == 0) |
| bounce_addr = sg_kmap_atomic(bounce_sgl,j); |
| |
| while (srclen) { |
| /* assume bounce offset always == 0 */ |
| dest = bounce_addr + bounce_sgl[j].length; |
| destlen = PAGE_SIZE - bounce_sgl[j].length; |
| |
| copylen = min(srclen, destlen); |
| memcpy((void *)dest, (void *)src, copylen); |
| |
| total_copied += copylen; |
| bounce_sgl[j].length += copylen; |
| srclen -= copylen; |
| src += copylen; |
| |
| if (bounce_sgl[j].length == PAGE_SIZE) { |
| /* full..move to next entry */ |
| sg_kunmap_atomic(bounce_addr); |
| j++; |
| |
| /* if we need to use another bounce buffer */ |
| if (srclen || i != orig_sgl_count - 1) |
| bounce_addr = sg_kmap_atomic(bounce_sgl,j); |
| |
| } else if (srclen == 0 && i == orig_sgl_count - 1) { |
| /* unmap the last bounce that is < PAGE_SIZE */ |
| sg_kunmap_atomic(bounce_addr); |
| } |
| } |
| |
| sg_kunmap_atomic(src_addr - orig_sgl[i].offset); |
| } |
| |
| local_irq_restore(flags); |
| |
| return total_copied; |
| } |
| |
| static int storvsc_channel_init(struct hv_device *device) |
| { |
| struct storvsc_device *stor_device; |
| struct storvsc_cmd_request *request; |
| struct vstor_packet *vstor_packet; |
| int ret, t; |
| |
| stor_device = get_out_stor_device(device); |
| if (!stor_device) |
| return -ENODEV; |
| |
| request = &stor_device->init_request; |
| vstor_packet = &request->vstor_packet; |
| |
| /* |
| * Now, initiate the vsc/vsp initialization protocol on the open |
| * channel |
| */ |
| memset(request, 0, sizeof(struct storvsc_cmd_request)); |
| init_completion(&request->wait_event); |
| vstor_packet->operation = VSTOR_OPERATION_BEGIN_INITIALIZATION; |
| vstor_packet->flags = REQUEST_COMPLETION_FLAG; |
| |
| ret = vmbus_sendpacket(device->channel, vstor_packet, |
| sizeof(struct vstor_packet), |
| (unsigned long)request, |
| VM_PKT_DATA_INBAND, |
| VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); |
| if (ret != 0) |
| goto cleanup; |
| |
| t = wait_for_completion_timeout(&request->wait_event, 5*HZ); |
| if (t == 0) { |
| ret = -ETIMEDOUT; |
| goto cleanup; |
| } |
| |
| if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO || |
| vstor_packet->status != 0) |
| goto cleanup; |
| |
| |
| /* reuse the packet for version range supported */ |
| memset(vstor_packet, 0, sizeof(struct vstor_packet)); |
| vstor_packet->operation = VSTOR_OPERATION_QUERY_PROTOCOL_VERSION; |
| vstor_packet->flags = REQUEST_COMPLETION_FLAG; |
| |
| vstor_packet->version.major_minor = |
| storvsc_get_version(VMSTOR_CURRENT_MAJOR, VMSTOR_CURRENT_MINOR); |
| |
| /* |
| * The revision number is only used in Windows; set it to 0. |
| */ |
| vstor_packet->version.revision = 0; |
| |
| ret = vmbus_sendpacket(device->channel, vstor_packet, |
| sizeof(struct vstor_packet), |
| (unsigned long)request, |
| VM_PKT_DATA_INBAND, |
| VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); |
| if (ret != 0) |
| goto cleanup; |
| |
| t = wait_for_completion_timeout(&request->wait_event, 5*HZ); |
| if (t == 0) { |
| ret = -ETIMEDOUT; |
| goto cleanup; |
| } |
| |
| if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO || |
| vstor_packet->status != 0) |
| goto cleanup; |
| |
| |
| memset(vstor_packet, 0, sizeof(struct vstor_packet)); |
| vstor_packet->operation = VSTOR_OPERATION_QUERY_PROPERTIES; |
| vstor_packet->flags = REQUEST_COMPLETION_FLAG; |
| vstor_packet->storage_channel_properties.port_number = |
| stor_device->port_number; |
| |
| ret = vmbus_sendpacket(device->channel, vstor_packet, |
| sizeof(struct vstor_packet), |
| (unsigned long)request, |
| VM_PKT_DATA_INBAND, |
| VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); |
| |
| if (ret != 0) |
| goto cleanup; |
| |
| t = wait_for_completion_timeout(&request->wait_event, 5*HZ); |
| if (t == 0) { |
| ret = -ETIMEDOUT; |
| goto cleanup; |
| } |
| |
| if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO || |
| vstor_packet->status != 0) |
| goto cleanup; |
| |
| stor_device->path_id = vstor_packet->storage_channel_properties.path_id; |
| stor_device->target_id |
| = vstor_packet->storage_channel_properties.target_id; |
| |
| memset(vstor_packet, 0, sizeof(struct vstor_packet)); |
| vstor_packet->operation = VSTOR_OPERATION_END_INITIALIZATION; |
| vstor_packet->flags = REQUEST_COMPLETION_FLAG; |
| |
| ret = vmbus_sendpacket(device->channel, vstor_packet, |
| sizeof(struct vstor_packet), |
| (unsigned long)request, |
| VM_PKT_DATA_INBAND, |
| VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); |
| |
| if (ret != 0) |
| goto cleanup; |
| |
| t = wait_for_completion_timeout(&request->wait_event, 5*HZ); |
| if (t == 0) { |
| ret = -ETIMEDOUT; |
| goto cleanup; |
| } |
| |
| if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO || |
| vstor_packet->status != 0) |
| goto cleanup; |
| |
| |
| cleanup: |
| return ret; |
| } |
| |
| |
| static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request) |
| { |
| struct scsi_cmnd *scmnd = cmd_request->cmd; |
| struct hv_host_device *host_dev = shost_priv(scmnd->device->host); |
| void (*scsi_done_fn)(struct scsi_cmnd *); |
| struct scsi_sense_hdr sense_hdr; |
| struct vmscsi_request *vm_srb; |
| struct storvsc_scan_work *wrk; |
| struct stor_mem_pools *memp = scmnd->device->hostdata; |
| |
| vm_srb = &cmd_request->vstor_packet.vm_srb; |
| if (cmd_request->bounce_sgl_count) { |
| if (vm_srb->data_in == READ_TYPE) |
| copy_from_bounce_buffer(scsi_sglist(scmnd), |
| cmd_request->bounce_sgl, |
| scsi_sg_count(scmnd), |
| cmd_request->bounce_sgl_count); |
| destroy_bounce_buffer(cmd_request->bounce_sgl, |
| cmd_request->bounce_sgl_count); |
| } |
| |
| /* |
| * If there is an error; offline the device since all |
| * error recovery strategies would have already been |
| * deployed on the host side. However, if the command |
| * were a pass-through command deal with it appropriately. |
| */ |
| scmnd->result = vm_srb->scsi_status; |
| |
| if (vm_srb->srb_status == SRB_STATUS_ERROR) { |
| switch (scmnd->cmnd[0]) { |
| case ATA_16: |
| case ATA_12: |
| set_host_byte(scmnd, DID_PASSTHROUGH); |
| break; |
| default: |
| set_host_byte(scmnd, DID_TARGET_FAILURE); |
| } |
| } |
| |
| |
| /* |
| * If the LUN is invalid; remove the device. |
| */ |
| if (vm_srb->srb_status == SRB_STATUS_INVALID_LUN) { |
| struct storvsc_device *stor_dev; |
| struct hv_device *dev = host_dev->dev; |
| struct Scsi_Host *host; |
| |
| stor_dev = get_in_stor_device(dev); |
| host = stor_dev->host; |
| |
| wrk = kmalloc(sizeof(struct storvsc_scan_work), |
| GFP_ATOMIC); |
| if (!wrk) { |
| scmnd->result = DID_TARGET_FAILURE << 16; |
| } else { |
| wrk->host = host; |
| wrk->lun = vm_srb->lun; |
| INIT_WORK(&wrk->work, storvsc_remove_lun); |
| schedule_work(&wrk->work); |
| } |
| } |
| |
| if (scmnd->result) { |
| if (scsi_normalize_sense(scmnd->sense_buffer, |
| SCSI_SENSE_BUFFERSIZE, &sense_hdr)) |
| scsi_print_sense_hdr("storvsc", &sense_hdr); |
| } |
| |
| scsi_set_resid(scmnd, |
| cmd_request->data_buffer.len - |
| vm_srb->data_transfer_length); |
| |
| scsi_done_fn = scmnd->scsi_done; |
| |
| scmnd->host_scribble = NULL; |
| scmnd->scsi_done = NULL; |
| |
| scsi_done_fn(scmnd); |
| |
| mempool_free(cmd_request, memp->request_mempool); |
| } |
| |
| static void storvsc_on_io_completion(struct hv_device *device, |
| struct vstor_packet *vstor_packet, |
| struct storvsc_cmd_request *request) |
| { |
| struct storvsc_device *stor_device; |
| struct vstor_packet *stor_pkt; |
| |
| stor_device = hv_get_drvdata(device); |
| stor_pkt = &request->vstor_packet; |
| |
| /* |
| * The current SCSI handling on the host side does |
| * not correctly handle: |
| * INQUIRY command with page code parameter set to 0x80 |
| * MODE_SENSE command with cmd[2] == 0x1c |
| * |
| * Setup srb and scsi status so this won't be fatal. |
| * We do this so we can distinguish truly fatal failues |
| * (srb status == 0x4) and off-line the device in that case. |
| */ |
| |
| if ((stor_pkt->vm_srb.cdb[0] == INQUIRY) || |
| (stor_pkt->vm_srb.cdb[0] == MODE_SENSE)) { |
| vstor_packet->vm_srb.scsi_status = 0; |
| vstor_packet->vm_srb.srb_status = SRB_STATUS_SUCCESS; |
| } |
| |
| |
| /* Copy over the status...etc */ |
| stor_pkt->vm_srb.scsi_status = vstor_packet->vm_srb.scsi_status; |
| stor_pkt->vm_srb.srb_status = vstor_packet->vm_srb.srb_status; |
| stor_pkt->vm_srb.sense_info_length = |
| vstor_packet->vm_srb.sense_info_length; |
| |
| if (vstor_packet->vm_srb.scsi_status != 0 || |
| vstor_packet->vm_srb.srb_status != SRB_STATUS_SUCCESS){ |
| dev_warn(&device->device, |
| "cmd 0x%x scsi status 0x%x srb status 0x%x\n", |
| stor_pkt->vm_srb.cdb[0], |
| vstor_packet->vm_srb.scsi_status, |
| vstor_packet->vm_srb.srb_status); |
| } |
| |
| if ((vstor_packet->vm_srb.scsi_status & 0xFF) == 0x02) { |
| /* CHECK_CONDITION */ |
| if (vstor_packet->vm_srb.srb_status & |
| SRB_STATUS_AUTOSENSE_VALID) { |
| /* autosense data available */ |
| dev_warn(&device->device, |
| "stor pkt %p autosense data valid - len %d\n", |
| request, |
| vstor_packet->vm_srb.sense_info_length); |
| |
| memcpy(request->sense_buffer, |
| vstor_packet->vm_srb.sense_data, |
| vstor_packet->vm_srb.sense_info_length); |
| |
| } |
| } |
| |
| stor_pkt->vm_srb.data_transfer_length = |
| vstor_packet->vm_srb.data_transfer_length; |
| |
| storvsc_command_completion(request); |
| |
| if (atomic_dec_and_test(&stor_device->num_outstanding_req) && |
| stor_device->drain_notify) |
| wake_up(&stor_device->waiting_to_drain); |
| |
| |
| } |
| |
| static void storvsc_on_receive(struct hv_device *device, |
| struct vstor_packet *vstor_packet, |
| struct storvsc_cmd_request *request) |
| { |
| struct storvsc_scan_work *work; |
| struct storvsc_device *stor_device; |
| |
| switch (vstor_packet->operation) { |
| case VSTOR_OPERATION_COMPLETE_IO: |
| storvsc_on_io_completion(device, vstor_packet, request); |
| break; |
| |
| case VSTOR_OPERATION_REMOVE_DEVICE: |
| case VSTOR_OPERATION_ENUMERATE_BUS: |
| stor_device = get_in_stor_device(device); |
| work = kmalloc(sizeof(struct storvsc_scan_work), GFP_ATOMIC); |
| if (!work) |
| return; |
| |
| INIT_WORK(&work->work, storvsc_bus_scan); |
| work->host = stor_device->host; |
| schedule_work(&work->work); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| static void storvsc_on_channel_callback(void *context) |
| { |
| struct hv_device *device = (struct hv_device *)context; |
| struct storvsc_device *stor_device; |
| u32 bytes_recvd; |
| u64 request_id; |
| unsigned char packet[ALIGN(sizeof(struct vstor_packet), 8)]; |
| struct storvsc_cmd_request *request; |
| int ret; |
| |
| |
| stor_device = get_in_stor_device(device); |
| if (!stor_device) |
| return; |
| |
| do { |
| ret = vmbus_recvpacket(device->channel, packet, |
| ALIGN(sizeof(struct vstor_packet), 8), |
| &bytes_recvd, &request_id); |
| if (ret == 0 && bytes_recvd > 0) { |
| |
| request = (struct storvsc_cmd_request *) |
| (unsigned long)request_id; |
| |
| if ((request == &stor_device->init_request) || |
| (request == &stor_device->reset_request)) { |
| |
| memcpy(&request->vstor_packet, packet, |
| sizeof(struct vstor_packet)); |
| complete(&request->wait_event); |
| } else { |
| storvsc_on_receive(device, |
| (struct vstor_packet *)packet, |
| request); |
| } |
| } else { |
| break; |
| } |
| } while (1); |
| |
| return; |
| } |
| |
| static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size) |
| { |
| struct vmstorage_channel_properties props; |
| int ret; |
| |
| memset(&props, 0, sizeof(struct vmstorage_channel_properties)); |
| |
| ret = vmbus_open(device->channel, |
| ring_size, |
| ring_size, |
| (void *)&props, |
| sizeof(struct vmstorage_channel_properties), |
| storvsc_on_channel_callback, device); |
| |
| if (ret != 0) |
| return ret; |
| |
| ret = storvsc_channel_init(device); |
| |
| return ret; |
| } |
| |
| static int storvsc_dev_remove(struct hv_device *device) |
| { |
| struct storvsc_device *stor_device; |
| unsigned long flags; |
| |
| stor_device = hv_get_drvdata(device); |
| |
| spin_lock_irqsave(&device->channel->inbound_lock, flags); |
| stor_device->destroy = true; |
| spin_unlock_irqrestore(&device->channel->inbound_lock, flags); |
| |
| /* |
| * At this point, all outbound traffic should be disable. We |
| * only allow inbound traffic (responses) to proceed so that |
| * outstanding requests can be completed. |
| */ |
| |
| storvsc_wait_to_drain(stor_device); |
| |
| /* |
| * Since we have already drained, we don't need to busy wait |
| * as was done in final_release_stor_device() |
| * Note that we cannot set the ext pointer to NULL until |
| * we have drained - to drain the outgoing packets, we need to |
| * allow incoming packets. |
| */ |
| spin_lock_irqsave(&device->channel->inbound_lock, flags); |
| hv_set_drvdata(device, NULL); |
| spin_unlock_irqrestore(&device->channel->inbound_lock, flags); |
| |
| /* Close the channel */ |
| vmbus_close(device->channel); |
| |
| kfree(stor_device); |
| return 0; |
| } |
| |
| static int storvsc_do_io(struct hv_device *device, |
| struct storvsc_cmd_request *request) |
| { |
| struct storvsc_device *stor_device; |
| struct vstor_packet *vstor_packet; |
| int ret = 0; |
| |
| vstor_packet = &request->vstor_packet; |
| stor_device = get_out_stor_device(device); |
| |
| if (!stor_device) |
| return -ENODEV; |
| |
| |
| request->device = device; |
| |
| |
| vstor_packet->flags |= REQUEST_COMPLETION_FLAG; |
| |
| vstor_packet->vm_srb.length = sizeof(struct vmscsi_request); |
| |
| |
| vstor_packet->vm_srb.sense_info_length = STORVSC_SENSE_BUFFER_SIZE; |
| |
| |
| vstor_packet->vm_srb.data_transfer_length = |
| request->data_buffer.len; |
| |
| vstor_packet->operation = VSTOR_OPERATION_EXECUTE_SRB; |
| |
| if (request->data_buffer.len) { |
| ret = vmbus_sendpacket_multipagebuffer(device->channel, |
| &request->data_buffer, |
| vstor_packet, |
| sizeof(struct vstor_packet), |
| (unsigned long)request); |
| } else { |
| ret = vmbus_sendpacket(device->channel, vstor_packet, |
| sizeof(struct vstor_packet), |
| (unsigned long)request, |
| VM_PKT_DATA_INBAND, |
| VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); |
| } |
| |
| if (ret != 0) |
| return ret; |
| |
| atomic_inc(&stor_device->num_outstanding_req); |
| |
| return ret; |
| } |
| |
| static int storvsc_device_alloc(struct scsi_device *sdevice) |
| { |
| struct stor_mem_pools *memp; |
| int number = STORVSC_MIN_BUF_NR; |
| |
| memp = kzalloc(sizeof(struct stor_mem_pools), GFP_KERNEL); |
| if (!memp) |
| return -ENOMEM; |
| |
| memp->request_pool = |
| kmem_cache_create(dev_name(&sdevice->sdev_dev), |
| sizeof(struct storvsc_cmd_request), 0, |
| SLAB_HWCACHE_ALIGN, NULL); |
| |
| if (!memp->request_pool) |
| goto err0; |
| |
| memp->request_mempool = mempool_create(number, mempool_alloc_slab, |
| mempool_free_slab, |
| memp->request_pool); |
| |
| if (!memp->request_mempool) |
| goto err1; |
| |
| sdevice->hostdata = memp; |
| |
| return 0; |
| |
| err1: |
| kmem_cache_destroy(memp->request_pool); |
| |
| err0: |
| kfree(memp); |
| return -ENOMEM; |
| } |
| |
| static void storvsc_device_destroy(struct scsi_device *sdevice) |
| { |
| struct stor_mem_pools *memp = sdevice->hostdata; |
| |
| mempool_destroy(memp->request_mempool); |
| kmem_cache_destroy(memp->request_pool); |
| kfree(memp); |
| sdevice->hostdata = NULL; |
| } |
| |
| static int storvsc_device_configure(struct scsi_device *sdevice) |
| { |
| scsi_adjust_queue_depth(sdevice, MSG_SIMPLE_TAG, |
| STORVSC_MAX_IO_REQUESTS); |
| |
| blk_queue_max_segment_size(sdevice->request_queue, PAGE_SIZE); |
| |
| blk_queue_bounce_limit(sdevice->request_queue, BLK_BOUNCE_ANY); |
| |
| return 0; |
| } |
| |
| static int storvsc_get_chs(struct scsi_device *sdev, struct block_device * bdev, |
| sector_t capacity, int *info) |
| { |
| sector_t nsect = capacity; |
| sector_t cylinders = nsect; |
| int heads, sectors_pt; |
| |
| /* |
| * We are making up these values; let us keep it simple. |
| */ |
| heads = 0xff; |
| sectors_pt = 0x3f; /* Sectors per track */ |
| sector_div(cylinders, heads * sectors_pt); |
| if ((sector_t)(cylinders + 1) * heads * sectors_pt < nsect) |
| cylinders = 0xffff; |
| |
| info[0] = heads; |
| info[1] = sectors_pt; |
| info[2] = (int)cylinders; |
| |
| return 0; |
| } |
| |
| static int storvsc_host_reset_handler(struct scsi_cmnd *scmnd) |
| { |
| struct hv_host_device *host_dev = shost_priv(scmnd->device->host); |
| struct hv_device *device = host_dev->dev; |
| |
| struct storvsc_device *stor_device; |
| struct storvsc_cmd_request *request; |
| struct vstor_packet *vstor_packet; |
| int ret, t; |
| |
| |
| stor_device = get_out_stor_device(device); |
| if (!stor_device) |
| return FAILED; |
| |
| request = &stor_device->reset_request; |
| vstor_packet = &request->vstor_packet; |
| |
| init_completion(&request->wait_event); |
| |
| vstor_packet->operation = VSTOR_OPERATION_RESET_BUS; |
| vstor_packet->flags = REQUEST_COMPLETION_FLAG; |
| vstor_packet->vm_srb.path_id = stor_device->path_id; |
| |
| ret = vmbus_sendpacket(device->channel, vstor_packet, |
| sizeof(struct vstor_packet), |
| (unsigned long)&stor_device->reset_request, |
| VM_PKT_DATA_INBAND, |
| VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); |
| if (ret != 0) |
| return FAILED; |
| |
| t = wait_for_completion_timeout(&request->wait_event, 5*HZ); |
| if (t == 0) |
| return TIMEOUT_ERROR; |
| |
| |
| /* |
| * At this point, all outstanding requests in the adapter |
| * should have been flushed out and return to us |
| * There is a potential race here where the host may be in |
| * the process of responding when we return from here. |
| * Just wait for all in-transit packets to be accounted for |
| * before we return from here. |
| */ |
| storvsc_wait_to_drain(stor_device); |
| |
| return SUCCESS; |
| } |
| |
| static bool storvsc_scsi_cmd_ok(struct scsi_cmnd *scmnd) |
| { |
| bool allowed = true; |
| u8 scsi_op = scmnd->cmnd[0]; |
| |
| switch (scsi_op) { |
| /* |
| * smartd sends this command and the host does not handle |
| * this. So, don't send it. |
| */ |
| case SET_WINDOW: |
| scmnd->result = ILLEGAL_REQUEST << 16; |
| allowed = false; |
| break; |
| default: |
| break; |
| } |
| return allowed; |
| } |
| |
| static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd) |
| { |
| int ret; |
| struct hv_host_device *host_dev = shost_priv(host); |
| struct hv_device *dev = host_dev->dev; |
| struct storvsc_cmd_request *cmd_request; |
| unsigned int request_size = 0; |
| int i; |
| struct scatterlist *sgl; |
| unsigned int sg_count = 0; |
| struct vmscsi_request *vm_srb; |
| struct stor_mem_pools *memp = scmnd->device->hostdata; |
| |
| if (!storvsc_scsi_cmd_ok(scmnd)) { |
| scmnd->scsi_done(scmnd); |
| return 0; |
| } |
| |
| request_size = sizeof(struct storvsc_cmd_request); |
| |
| cmd_request = mempool_alloc(memp->request_mempool, |
| GFP_ATOMIC); |
| |
| /* |
| * We might be invoked in an interrupt context; hence |
| * mempool_alloc() can fail. |
| */ |
| if (!cmd_request) |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| |
| memset(cmd_request, 0, sizeof(struct storvsc_cmd_request)); |
| |
| /* Setup the cmd request */ |
| cmd_request->cmd = scmnd; |
| |
| scmnd->host_scribble = (unsigned char *)cmd_request; |
| |
| vm_srb = &cmd_request->vstor_packet.vm_srb; |
| |
| |
| /* Build the SRB */ |
| switch (scmnd->sc_data_direction) { |
| case DMA_TO_DEVICE: |
| vm_srb->data_in = WRITE_TYPE; |
| break; |
| case DMA_FROM_DEVICE: |
| vm_srb->data_in = READ_TYPE; |
| break; |
| default: |
| vm_srb->data_in = UNKNOWN_TYPE; |
| break; |
| } |
| |
| |
| vm_srb->port_number = host_dev->port; |
| vm_srb->path_id = scmnd->device->channel; |
| vm_srb->target_id = scmnd->device->id; |
| vm_srb->lun = scmnd->device->lun; |
| |
| vm_srb->cdb_length = scmnd->cmd_len; |
| |
| memcpy(vm_srb->cdb, scmnd->cmnd, vm_srb->cdb_length); |
| |
| cmd_request->sense_buffer = scmnd->sense_buffer; |
| |
| |
| cmd_request->data_buffer.len = scsi_bufflen(scmnd); |
| if (scsi_sg_count(scmnd)) { |
| sgl = (struct scatterlist *)scsi_sglist(scmnd); |
| sg_count = scsi_sg_count(scmnd); |
| |
| /* check if we need to bounce the sgl */ |
| if (do_bounce_buffer(sgl, scsi_sg_count(scmnd)) != -1) { |
| cmd_request->bounce_sgl = |
| create_bounce_buffer(sgl, scsi_sg_count(scmnd), |
| scsi_bufflen(scmnd), |
| vm_srb->data_in); |
| if (!cmd_request->bounce_sgl) { |
| ret = SCSI_MLQUEUE_HOST_BUSY; |
| goto queue_error; |
| } |
| |
| cmd_request->bounce_sgl_count = |
| ALIGN(scsi_bufflen(scmnd), PAGE_SIZE) >> |
| PAGE_SHIFT; |
| |
| if (vm_srb->data_in == WRITE_TYPE) |
| copy_to_bounce_buffer(sgl, |
| cmd_request->bounce_sgl, |
| scsi_sg_count(scmnd)); |
| |
| sgl = cmd_request->bounce_sgl; |
| sg_count = cmd_request->bounce_sgl_count; |
| } |
| |
| cmd_request->data_buffer.offset = sgl[0].offset; |
| |
| for (i = 0; i < sg_count; i++) |
| cmd_request->data_buffer.pfn_array[i] = |
| page_to_pfn(sg_page((&sgl[i]))); |
| |
| } else if (scsi_sglist(scmnd)) { |
| cmd_request->data_buffer.offset = |
| virt_to_phys(scsi_sglist(scmnd)) & (PAGE_SIZE-1); |
| cmd_request->data_buffer.pfn_array[0] = |
| virt_to_phys(scsi_sglist(scmnd)) >> PAGE_SHIFT; |
| } |
| |
| /* Invokes the vsc to start an IO */ |
| ret = storvsc_do_io(dev, cmd_request); |
| |
| if (ret == -EAGAIN) { |
| /* no more space */ |
| |
| if (cmd_request->bounce_sgl_count) { |
| destroy_bounce_buffer(cmd_request->bounce_sgl, |
| cmd_request->bounce_sgl_count); |
| |
| ret = SCSI_MLQUEUE_DEVICE_BUSY; |
| goto queue_error; |
| } |
| } |
| |
| return 0; |
| |
| queue_error: |
| mempool_free(cmd_request, memp->request_mempool); |
| scmnd->host_scribble = NULL; |
| return ret; |
| } |
| |
| static struct scsi_host_template scsi_driver = { |
| .module = THIS_MODULE, |
| .name = "storvsc_host_t", |
| .bios_param = storvsc_get_chs, |
| .queuecommand = storvsc_queuecommand, |
| .eh_host_reset_handler = storvsc_host_reset_handler, |
| .slave_alloc = storvsc_device_alloc, |
| .slave_destroy = storvsc_device_destroy, |
| .slave_configure = storvsc_device_configure, |
| .cmd_per_lun = 1, |
| /* 64 max_queue * 1 target */ |
| .can_queue = STORVSC_MAX_IO_REQUESTS*STORVSC_MAX_TARGETS, |
| .this_id = -1, |
| /* no use setting to 0 since ll_blk_rw reset it to 1 */ |
| /* currently 32 */ |
| .sg_tablesize = MAX_MULTIPAGE_BUFFER_COUNT, |
| .use_clustering = DISABLE_CLUSTERING, |
| /* Make sure we dont get a sg segment crosses a page boundary */ |
| .dma_boundary = PAGE_SIZE-1, |
| }; |
| |
| enum { |
| SCSI_GUID, |
| IDE_GUID, |
| }; |
| |
| static const struct hv_vmbus_device_id id_table[] = { |
| /* SCSI guid */ |
| { HV_SCSI_GUID, |
| .driver_data = SCSI_GUID |
| }, |
| /* IDE guid */ |
| { HV_IDE_GUID, |
| .driver_data = IDE_GUID |
| }, |
| { }, |
| }; |
| |
| MODULE_DEVICE_TABLE(vmbus, id_table); |
| |
| static int storvsc_probe(struct hv_device *device, |
| const struct hv_vmbus_device_id *dev_id) |
| { |
| int ret; |
| struct Scsi_Host *host; |
| struct hv_host_device *host_dev; |
| bool dev_is_ide = ((dev_id->driver_data == IDE_GUID) ? true : false); |
| int target = 0; |
| struct storvsc_device *stor_device; |
| |
| host = scsi_host_alloc(&scsi_driver, |
| sizeof(struct hv_host_device)); |
| if (!host) |
| return -ENOMEM; |
| |
| host_dev = shost_priv(host); |
| memset(host_dev, 0, sizeof(struct hv_host_device)); |
| |
| host_dev->port = host->host_no; |
| host_dev->dev = device; |
| |
| |
| stor_device = kzalloc(sizeof(struct storvsc_device), GFP_KERNEL); |
| if (!stor_device) { |
| ret = -ENOMEM; |
| goto err_out0; |
| } |
| |
| stor_device->destroy = false; |
| init_waitqueue_head(&stor_device->waiting_to_drain); |
| stor_device->device = device; |
| stor_device->host = host; |
| hv_set_drvdata(device, stor_device); |
| |
| stor_device->port_number = host->host_no; |
| ret = storvsc_connect_to_vsp(device, storvsc_ringbuffer_size); |
| if (ret) |
| goto err_out1; |
| |
| host_dev->path = stor_device->path_id; |
| host_dev->target = stor_device->target_id; |
| |
| /* max # of devices per target */ |
| host->max_lun = STORVSC_MAX_LUNS_PER_TARGET; |
| /* max # of targets per channel */ |
| host->max_id = STORVSC_MAX_TARGETS; |
| /* max # of channels */ |
| host->max_channel = STORVSC_MAX_CHANNELS - 1; |
| /* max cmd length */ |
| host->max_cmd_len = STORVSC_MAX_CMD_LEN; |
| |
| /* Register the HBA and start the scsi bus scan */ |
| ret = scsi_add_host(host, &device->device); |
| if (ret != 0) |
| goto err_out2; |
| |
| if (!dev_is_ide) { |
| scsi_scan_host(host); |
| } else { |
| target = (device->dev_instance.b[5] << 8 | |
| device->dev_instance.b[4]); |
| ret = scsi_add_device(host, 0, target, 0); |
| if (ret) { |
| scsi_remove_host(host); |
| goto err_out2; |
| } |
| } |
| return 0; |
| |
| err_out2: |
| /* |
| * Once we have connected with the host, we would need to |
| * to invoke storvsc_dev_remove() to rollback this state and |
| * this call also frees up the stor_device; hence the jump around |
| * err_out1 label. |
| */ |
| storvsc_dev_remove(device); |
| goto err_out0; |
| |
| err_out1: |
| kfree(stor_device); |
| |
| err_out0: |
| scsi_host_put(host); |
| return ret; |
| } |
| |
| static int storvsc_remove(struct hv_device *dev) |
| { |
| struct storvsc_device *stor_device = hv_get_drvdata(dev); |
| struct Scsi_Host *host = stor_device->host; |
| |
| scsi_remove_host(host); |
| storvsc_dev_remove(dev); |
| scsi_host_put(host); |
| |
| return 0; |
| } |
| |
| static struct hv_driver storvsc_drv = { |
| .name = KBUILD_MODNAME, |
| .id_table = id_table, |
| .probe = storvsc_probe, |
| .remove = storvsc_remove, |
| }; |
| |
| static int __init storvsc_drv_init(void) |
| { |
| u32 max_outstanding_req_per_channel; |
| |
| /* |
| * Divide the ring buffer data size (which is 1 page less |
| * than the ring buffer size since that page is reserved for |
| * the ring buffer indices) by the max request size (which is |
| * vmbus_channel_packet_multipage_buffer + struct vstor_packet + u64) |
| */ |
| max_outstanding_req_per_channel = |
| ((storvsc_ringbuffer_size - PAGE_SIZE) / |
| ALIGN(MAX_MULTIPAGE_BUFFER_PACKET + |
| sizeof(struct vstor_packet) + sizeof(u64), |
| sizeof(u64))); |
| |
| if (max_outstanding_req_per_channel < |
| STORVSC_MAX_IO_REQUESTS) |
| return -EINVAL; |
| |
| return vmbus_driver_register(&storvsc_drv); |
| } |
| |
| static void __exit storvsc_drv_exit(void) |
| { |
| vmbus_driver_unregister(&storvsc_drv); |
| } |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(HV_DRV_VERSION); |
| MODULE_DESCRIPTION("Microsoft Hyper-V virtual storage driver"); |
| module_init(storvsc_drv_init); |
| module_exit(storvsc_drv_exit); |