| /* |
| * Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| * Copyright (c) 2013 Linaro Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This file contains the utility functions to register the pll clocks. |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/hrtimer.h> |
| #include "clk.h" |
| #include "clk-pll.h" |
| |
| #define PLL_TIMEOUT_MS 10 |
| |
| struct samsung_clk_pll { |
| struct clk_hw hw; |
| void __iomem *lock_reg; |
| void __iomem *con_reg; |
| enum samsung_pll_type type; |
| unsigned int rate_count; |
| const struct samsung_pll_rate_table *rate_table; |
| }; |
| |
| #define to_clk_pll(_hw) container_of(_hw, struct samsung_clk_pll, hw) |
| |
| static const struct samsung_pll_rate_table *samsung_get_pll_settings( |
| struct samsung_clk_pll *pll, unsigned long rate) |
| { |
| const struct samsung_pll_rate_table *rate_table = pll->rate_table; |
| int i; |
| |
| for (i = 0; i < pll->rate_count; i++) { |
| if (rate == rate_table[i].rate) |
| return &rate_table[i]; |
| } |
| |
| return NULL; |
| } |
| |
| static long samsung_pll_round_rate(struct clk_hw *hw, |
| unsigned long drate, unsigned long *prate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| const struct samsung_pll_rate_table *rate_table = pll->rate_table; |
| int i; |
| |
| /* Assumming rate_table is in descending order */ |
| for (i = 0; i < pll->rate_count; i++) { |
| if (drate >= rate_table[i].rate) |
| return rate_table[i].rate; |
| } |
| |
| /* return minimum supported value */ |
| return rate_table[i - 1].rate; |
| } |
| |
| /* |
| * PLL35xx Clock Type |
| */ |
| /* Maximum lock time can be 270 * PDIV cycles */ |
| #define PLL35XX_LOCK_FACTOR (270) |
| |
| #define PLL35XX_MDIV_MASK (0x3FF) |
| #define PLL35XX_PDIV_MASK (0x3F) |
| #define PLL35XX_SDIV_MASK (0x7) |
| #define PLL35XX_LOCK_STAT_MASK (0x1) |
| #define PLL35XX_MDIV_SHIFT (16) |
| #define PLL35XX_PDIV_SHIFT (8) |
| #define PLL35XX_SDIV_SHIFT (0) |
| #define PLL35XX_LOCK_STAT_SHIFT (29) |
| |
| static unsigned long samsung_pll35xx_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 mdiv, pdiv, sdiv, pll_con; |
| u64 fvco = parent_rate; |
| |
| pll_con = __raw_readl(pll->con_reg); |
| mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK; |
| pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK; |
| sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK; |
| |
| fvco *= mdiv; |
| do_div(fvco, (pdiv << sdiv)); |
| |
| return (unsigned long)fvco; |
| } |
| |
| static inline bool samsung_pll35xx_mp_change( |
| const struct samsung_pll_rate_table *rate, u32 pll_con) |
| { |
| u32 old_mdiv, old_pdiv; |
| |
| old_mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK; |
| old_pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK; |
| |
| return (rate->mdiv != old_mdiv || rate->pdiv != old_pdiv); |
| } |
| |
| static int samsung_pll35xx_set_rate(struct clk_hw *hw, unsigned long drate, |
| unsigned long prate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| const struct samsung_pll_rate_table *rate; |
| u32 tmp; |
| |
| /* Get required rate settings from table */ |
| rate = samsung_get_pll_settings(pll, drate); |
| if (!rate) { |
| pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, |
| drate, __clk_get_name(hw->clk)); |
| return -EINVAL; |
| } |
| |
| tmp = __raw_readl(pll->con_reg); |
| |
| if (!(samsung_pll35xx_mp_change(rate, tmp))) { |
| /* If only s change, change just s value only*/ |
| tmp &= ~(PLL35XX_SDIV_MASK << PLL35XX_SDIV_SHIFT); |
| tmp |= rate->sdiv << PLL35XX_SDIV_SHIFT; |
| __raw_writel(tmp, pll->con_reg); |
| |
| return 0; |
| } |
| |
| /* Set PLL lock time. */ |
| __raw_writel(rate->pdiv * PLL35XX_LOCK_FACTOR, |
| pll->lock_reg); |
| |
| /* Change PLL PMS values */ |
| tmp &= ~((PLL35XX_MDIV_MASK << PLL35XX_MDIV_SHIFT) | |
| (PLL35XX_PDIV_MASK << PLL35XX_PDIV_SHIFT) | |
| (PLL35XX_SDIV_MASK << PLL35XX_SDIV_SHIFT)); |
| tmp |= (rate->mdiv << PLL35XX_MDIV_SHIFT) | |
| (rate->pdiv << PLL35XX_PDIV_SHIFT) | |
| (rate->sdiv << PLL35XX_SDIV_SHIFT); |
| __raw_writel(tmp, pll->con_reg); |
| |
| /* wait_lock_time */ |
| do { |
| cpu_relax(); |
| tmp = __raw_readl(pll->con_reg); |
| } while (!(tmp & (PLL35XX_LOCK_STAT_MASK |
| << PLL35XX_LOCK_STAT_SHIFT))); |
| return 0; |
| } |
| |
| static const struct clk_ops samsung_pll35xx_clk_ops = { |
| .recalc_rate = samsung_pll35xx_recalc_rate, |
| .round_rate = samsung_pll_round_rate, |
| .set_rate = samsung_pll35xx_set_rate, |
| }; |
| |
| static const struct clk_ops samsung_pll35xx_clk_min_ops = { |
| .recalc_rate = samsung_pll35xx_recalc_rate, |
| }; |
| |
| /* |
| * PLL36xx Clock Type |
| */ |
| /* Maximum lock time can be 3000 * PDIV cycles */ |
| #define PLL36XX_LOCK_FACTOR (3000) |
| |
| #define PLL36XX_KDIV_MASK (0xFFFF) |
| #define PLL36XX_MDIV_MASK (0x1FF) |
| #define PLL36XX_PDIV_MASK (0x3F) |
| #define PLL36XX_SDIV_MASK (0x7) |
| #define PLL36XX_MDIV_SHIFT (16) |
| #define PLL36XX_PDIV_SHIFT (8) |
| #define PLL36XX_SDIV_SHIFT (0) |
| #define PLL36XX_KDIV_SHIFT (0) |
| #define PLL36XX_LOCK_STAT_SHIFT (29) |
| |
| static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 mdiv, pdiv, sdiv, pll_con0, pll_con1; |
| s16 kdiv; |
| u64 fvco = parent_rate; |
| |
| pll_con0 = __raw_readl(pll->con_reg); |
| pll_con1 = __raw_readl(pll->con_reg + 4); |
| mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK; |
| pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK; |
| sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK; |
| kdiv = (s16)(pll_con1 & PLL36XX_KDIV_MASK); |
| |
| fvco *= (mdiv << 16) + kdiv; |
| do_div(fvco, (pdiv << sdiv)); |
| fvco >>= 16; |
| |
| return (unsigned long)fvco; |
| } |
| |
| static inline bool samsung_pll36xx_mpk_change( |
| const struct samsung_pll_rate_table *rate, u32 pll_con0, u32 pll_con1) |
| { |
| u32 old_mdiv, old_pdiv, old_kdiv; |
| |
| old_mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK; |
| old_pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK; |
| old_kdiv = (pll_con1 >> PLL36XX_KDIV_SHIFT) & PLL36XX_KDIV_MASK; |
| |
| return (rate->mdiv != old_mdiv || rate->pdiv != old_pdiv || |
| rate->kdiv != old_kdiv); |
| } |
| |
| static int samsung_pll36xx_set_rate(struct clk_hw *hw, unsigned long drate, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 tmp, pll_con0, pll_con1; |
| const struct samsung_pll_rate_table *rate; |
| |
| rate = samsung_get_pll_settings(pll, drate); |
| if (!rate) { |
| pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, |
| drate, __clk_get_name(hw->clk)); |
| return -EINVAL; |
| } |
| |
| pll_con0 = __raw_readl(pll->con_reg); |
| pll_con1 = __raw_readl(pll->con_reg + 4); |
| |
| if (!(samsung_pll36xx_mpk_change(rate, pll_con0, pll_con1))) { |
| /* If only s change, change just s value only*/ |
| pll_con0 &= ~(PLL36XX_SDIV_MASK << PLL36XX_SDIV_SHIFT); |
| pll_con0 |= (rate->sdiv << PLL36XX_SDIV_SHIFT); |
| __raw_writel(pll_con0, pll->con_reg); |
| |
| return 0; |
| } |
| |
| /* Set PLL lock time. */ |
| __raw_writel(rate->pdiv * PLL36XX_LOCK_FACTOR, pll->lock_reg); |
| |
| /* Change PLL PMS values */ |
| pll_con0 &= ~((PLL36XX_MDIV_MASK << PLL36XX_MDIV_SHIFT) | |
| (PLL36XX_PDIV_MASK << PLL36XX_PDIV_SHIFT) | |
| (PLL36XX_SDIV_MASK << PLL36XX_SDIV_SHIFT)); |
| pll_con0 |= (rate->mdiv << PLL36XX_MDIV_SHIFT) | |
| (rate->pdiv << PLL36XX_PDIV_SHIFT) | |
| (rate->sdiv << PLL36XX_SDIV_SHIFT); |
| __raw_writel(pll_con0, pll->con_reg); |
| |
| pll_con1 &= ~(PLL36XX_KDIV_MASK << PLL36XX_KDIV_SHIFT); |
| pll_con1 |= rate->kdiv << PLL36XX_KDIV_SHIFT; |
| __raw_writel(pll_con1, pll->con_reg + 4); |
| |
| /* wait_lock_time */ |
| do { |
| cpu_relax(); |
| tmp = __raw_readl(pll->con_reg); |
| } while (!(tmp & (1 << PLL36XX_LOCK_STAT_SHIFT))); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops samsung_pll36xx_clk_ops = { |
| .recalc_rate = samsung_pll36xx_recalc_rate, |
| .set_rate = samsung_pll36xx_set_rate, |
| .round_rate = samsung_pll_round_rate, |
| }; |
| |
| static const struct clk_ops samsung_pll36xx_clk_min_ops = { |
| .recalc_rate = samsung_pll36xx_recalc_rate, |
| }; |
| |
| /* |
| * PLL45xx Clock Type |
| */ |
| #define PLL4502_LOCK_FACTOR 400 |
| #define PLL4508_LOCK_FACTOR 240 |
| |
| #define PLL45XX_MDIV_MASK (0x3FF) |
| #define PLL45XX_PDIV_MASK (0x3F) |
| #define PLL45XX_SDIV_MASK (0x7) |
| #define PLL45XX_AFC_MASK (0x1F) |
| #define PLL45XX_MDIV_SHIFT (16) |
| #define PLL45XX_PDIV_SHIFT (8) |
| #define PLL45XX_SDIV_SHIFT (0) |
| #define PLL45XX_AFC_SHIFT (0) |
| |
| #define PLL45XX_ENABLE BIT(31) |
| #define PLL45XX_LOCKED BIT(29) |
| |
| static unsigned long samsung_pll45xx_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 mdiv, pdiv, sdiv, pll_con; |
| u64 fvco = parent_rate; |
| |
| pll_con = __raw_readl(pll->con_reg); |
| mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK; |
| pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK; |
| sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK; |
| |
| if (pll->type == pll_4508) |
| sdiv = sdiv - 1; |
| |
| fvco *= mdiv; |
| do_div(fvco, (pdiv << sdiv)); |
| |
| return (unsigned long)fvco; |
| } |
| |
| static bool samsung_pll45xx_mp_change(u32 pll_con0, u32 pll_con1, |
| const struct samsung_pll_rate_table *rate) |
| { |
| u32 old_mdiv, old_pdiv, old_afc; |
| |
| old_mdiv = (pll_con0 >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK; |
| old_pdiv = (pll_con0 >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK; |
| old_afc = (pll_con1 >> PLL45XX_AFC_SHIFT) & PLL45XX_AFC_MASK; |
| |
| return (old_mdiv != rate->mdiv || old_pdiv != rate->pdiv |
| || old_afc != rate->afc); |
| } |
| |
| static int samsung_pll45xx_set_rate(struct clk_hw *hw, unsigned long drate, |
| unsigned long prate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| const struct samsung_pll_rate_table *rate; |
| u32 con0, con1; |
| ktime_t start; |
| |
| /* Get required rate settings from table */ |
| rate = samsung_get_pll_settings(pll, drate); |
| if (!rate) { |
| pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, |
| drate, __clk_get_name(hw->clk)); |
| return -EINVAL; |
| } |
| |
| con0 = __raw_readl(pll->con_reg); |
| con1 = __raw_readl(pll->con_reg + 0x4); |
| |
| if (!(samsung_pll45xx_mp_change(con0, con1, rate))) { |
| /* If only s change, change just s value only*/ |
| con0 &= ~(PLL45XX_SDIV_MASK << PLL45XX_SDIV_SHIFT); |
| con0 |= rate->sdiv << PLL45XX_SDIV_SHIFT; |
| __raw_writel(con0, pll->con_reg); |
| |
| return 0; |
| } |
| |
| /* Set PLL PMS values. */ |
| con0 &= ~((PLL45XX_MDIV_MASK << PLL45XX_MDIV_SHIFT) | |
| (PLL45XX_PDIV_MASK << PLL45XX_PDIV_SHIFT) | |
| (PLL45XX_SDIV_MASK << PLL45XX_SDIV_SHIFT)); |
| con0 |= (rate->mdiv << PLL45XX_MDIV_SHIFT) | |
| (rate->pdiv << PLL45XX_PDIV_SHIFT) | |
| (rate->sdiv << PLL45XX_SDIV_SHIFT); |
| |
| /* Set PLL AFC value. */ |
| con1 = __raw_readl(pll->con_reg + 0x4); |
| con1 &= ~(PLL45XX_AFC_MASK << PLL45XX_AFC_SHIFT); |
| con1 |= (rate->afc << PLL45XX_AFC_SHIFT); |
| |
| /* Set PLL lock time. */ |
| switch (pll->type) { |
| case pll_4502: |
| __raw_writel(rate->pdiv * PLL4502_LOCK_FACTOR, pll->lock_reg); |
| break; |
| case pll_4508: |
| __raw_writel(rate->pdiv * PLL4508_LOCK_FACTOR, pll->lock_reg); |
| break; |
| default: |
| break; |
| }; |
| |
| /* Set new configuration. */ |
| __raw_writel(con1, pll->con_reg + 0x4); |
| __raw_writel(con0, pll->con_reg); |
| |
| /* Wait for locking. */ |
| start = ktime_get(); |
| while (!(__raw_readl(pll->con_reg) & PLL45XX_LOCKED)) { |
| ktime_t delta = ktime_sub(ktime_get(), start); |
| |
| if (ktime_to_ms(delta) > PLL_TIMEOUT_MS) { |
| pr_err("%s: could not lock PLL %s\n", |
| __func__, __clk_get_name(hw->clk)); |
| return -EFAULT; |
| } |
| |
| cpu_relax(); |
| } |
| |
| return 0; |
| } |
| |
| static const struct clk_ops samsung_pll45xx_clk_ops = { |
| .recalc_rate = samsung_pll45xx_recalc_rate, |
| .round_rate = samsung_pll_round_rate, |
| .set_rate = samsung_pll45xx_set_rate, |
| }; |
| |
| static const struct clk_ops samsung_pll45xx_clk_min_ops = { |
| .recalc_rate = samsung_pll45xx_recalc_rate, |
| }; |
| |
| /* |
| * PLL46xx Clock Type |
| */ |
| #define PLL46XX_LOCK_FACTOR 3000 |
| |
| #define PLL46XX_VSEL_MASK (1) |
| #define PLL46XX_MDIV_MASK (0x1FF) |
| #define PLL46XX_PDIV_MASK (0x3F) |
| #define PLL46XX_SDIV_MASK (0x7) |
| #define PLL46XX_VSEL_SHIFT (27) |
| #define PLL46XX_MDIV_SHIFT (16) |
| #define PLL46XX_PDIV_SHIFT (8) |
| #define PLL46XX_SDIV_SHIFT (0) |
| |
| #define PLL46XX_KDIV_MASK (0xFFFF) |
| #define PLL4650C_KDIV_MASK (0xFFF) |
| #define PLL46XX_KDIV_SHIFT (0) |
| #define PLL46XX_MFR_MASK (0x3F) |
| #define PLL46XX_MRR_MASK (0x1F) |
| #define PLL46XX_KDIV_SHIFT (0) |
| #define PLL46XX_MFR_SHIFT (16) |
| #define PLL46XX_MRR_SHIFT (24) |
| |
| #define PLL46XX_ENABLE BIT(31) |
| #define PLL46XX_LOCKED BIT(29) |
| #define PLL46XX_VSEL BIT(27) |
| |
| static unsigned long samsung_pll46xx_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1, shift; |
| u64 fvco = parent_rate; |
| |
| pll_con0 = __raw_readl(pll->con_reg); |
| pll_con1 = __raw_readl(pll->con_reg + 4); |
| mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK; |
| pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK; |
| sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK; |
| kdiv = pll->type == pll_4650c ? pll_con1 & PLL4650C_KDIV_MASK : |
| pll_con1 & PLL46XX_KDIV_MASK; |
| |
| shift = pll->type == pll_4600 ? 16 : 10; |
| fvco *= (mdiv << shift) + kdiv; |
| do_div(fvco, (pdiv << sdiv)); |
| fvco >>= shift; |
| |
| return (unsigned long)fvco; |
| } |
| |
| static bool samsung_pll46xx_mpk_change(u32 pll_con0, u32 pll_con1, |
| const struct samsung_pll_rate_table *rate) |
| { |
| u32 old_mdiv, old_pdiv, old_kdiv; |
| |
| old_mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK; |
| old_pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK; |
| old_kdiv = (pll_con1 >> PLL46XX_KDIV_SHIFT) & PLL46XX_KDIV_MASK; |
| |
| return (old_mdiv != rate->mdiv || old_pdiv != rate->pdiv |
| || old_kdiv != rate->kdiv); |
| } |
| |
| static int samsung_pll46xx_set_rate(struct clk_hw *hw, unsigned long drate, |
| unsigned long prate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| const struct samsung_pll_rate_table *rate; |
| u32 con0, con1, lock; |
| ktime_t start; |
| |
| /* Get required rate settings from table */ |
| rate = samsung_get_pll_settings(pll, drate); |
| if (!rate) { |
| pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, |
| drate, __clk_get_name(hw->clk)); |
| return -EINVAL; |
| } |
| |
| con0 = __raw_readl(pll->con_reg); |
| con1 = __raw_readl(pll->con_reg + 0x4); |
| |
| if (!(samsung_pll46xx_mpk_change(con0, con1, rate))) { |
| /* If only s change, change just s value only*/ |
| con0 &= ~(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); |
| con0 |= rate->sdiv << PLL46XX_SDIV_SHIFT; |
| __raw_writel(con0, pll->con_reg); |
| |
| return 0; |
| } |
| |
| /* Set PLL lock time. */ |
| lock = rate->pdiv * PLL46XX_LOCK_FACTOR; |
| if (lock > 0xffff) |
| /* Maximum lock time bitfield is 16-bit. */ |
| lock = 0xffff; |
| |
| /* Set PLL PMS and VSEL values. */ |
| con0 &= ~((PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT) | |
| (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT) | |
| (PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT) | |
| (PLL46XX_VSEL_MASK << PLL46XX_VSEL_SHIFT)); |
| con0 |= (rate->mdiv << PLL46XX_MDIV_SHIFT) | |
| (rate->pdiv << PLL46XX_PDIV_SHIFT) | |
| (rate->sdiv << PLL46XX_SDIV_SHIFT) | |
| (rate->vsel << PLL46XX_VSEL_SHIFT); |
| |
| /* Set PLL K, MFR and MRR values. */ |
| con1 = __raw_readl(pll->con_reg + 0x4); |
| con1 &= ~((PLL46XX_KDIV_MASK << PLL46XX_KDIV_SHIFT) | |
| (PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT) | |
| (PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT)); |
| con1 |= (rate->kdiv << PLL46XX_KDIV_SHIFT) | |
| (rate->mfr << PLL46XX_MFR_SHIFT) | |
| (rate->mrr << PLL46XX_MRR_SHIFT); |
| |
| /* Write configuration to PLL */ |
| __raw_writel(lock, pll->lock_reg); |
| __raw_writel(con0, pll->con_reg); |
| __raw_writel(con1, pll->con_reg + 0x4); |
| |
| /* Wait for locking. */ |
| start = ktime_get(); |
| while (!(__raw_readl(pll->con_reg) & PLL46XX_LOCKED)) { |
| ktime_t delta = ktime_sub(ktime_get(), start); |
| |
| if (ktime_to_ms(delta) > PLL_TIMEOUT_MS) { |
| pr_err("%s: could not lock PLL %s\n", |
| __func__, __clk_get_name(hw->clk)); |
| return -EFAULT; |
| } |
| |
| cpu_relax(); |
| } |
| |
| return 0; |
| } |
| |
| static const struct clk_ops samsung_pll46xx_clk_ops = { |
| .recalc_rate = samsung_pll46xx_recalc_rate, |
| .round_rate = samsung_pll_round_rate, |
| .set_rate = samsung_pll46xx_set_rate, |
| }; |
| |
| static const struct clk_ops samsung_pll46xx_clk_min_ops = { |
| .recalc_rate = samsung_pll46xx_recalc_rate, |
| }; |
| |
| /* |
| * PLL6552 Clock Type |
| */ |
| |
| #define PLL6552_MDIV_MASK 0x3ff |
| #define PLL6552_PDIV_MASK 0x3f |
| #define PLL6552_SDIV_MASK 0x7 |
| #define PLL6552_MDIV_SHIFT 16 |
| #define PLL6552_PDIV_SHIFT 8 |
| #define PLL6552_SDIV_SHIFT 0 |
| |
| static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 mdiv, pdiv, sdiv, pll_con; |
| u64 fvco = parent_rate; |
| |
| pll_con = __raw_readl(pll->con_reg); |
| mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK; |
| pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK; |
| sdiv = (pll_con >> PLL6552_SDIV_SHIFT) & PLL6552_SDIV_MASK; |
| |
| fvco *= mdiv; |
| do_div(fvco, (pdiv << sdiv)); |
| |
| return (unsigned long)fvco; |
| } |
| |
| static const struct clk_ops samsung_pll6552_clk_ops = { |
| .recalc_rate = samsung_pll6552_recalc_rate, |
| }; |
| |
| /* |
| * PLL6553 Clock Type |
| */ |
| |
| #define PLL6553_MDIV_MASK 0xff |
| #define PLL6553_PDIV_MASK 0x3f |
| #define PLL6553_SDIV_MASK 0x7 |
| #define PLL6553_KDIV_MASK 0xffff |
| #define PLL6553_MDIV_SHIFT 16 |
| #define PLL6553_PDIV_SHIFT 8 |
| #define PLL6553_SDIV_SHIFT 0 |
| #define PLL6553_KDIV_SHIFT 0 |
| |
| static unsigned long samsung_pll6553_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1; |
| u64 fvco = parent_rate; |
| |
| pll_con0 = __raw_readl(pll->con_reg); |
| pll_con1 = __raw_readl(pll->con_reg + 0x4); |
| mdiv = (pll_con0 >> PLL6553_MDIV_SHIFT) & PLL6553_MDIV_MASK; |
| pdiv = (pll_con0 >> PLL6553_PDIV_SHIFT) & PLL6553_PDIV_MASK; |
| sdiv = (pll_con0 >> PLL6553_SDIV_SHIFT) & PLL6553_SDIV_MASK; |
| kdiv = (pll_con1 >> PLL6553_KDIV_SHIFT) & PLL6553_KDIV_MASK; |
| |
| fvco *= (mdiv << 16) + kdiv; |
| do_div(fvco, (pdiv << sdiv)); |
| fvco >>= 16; |
| |
| return (unsigned long)fvco; |
| } |
| |
| static const struct clk_ops samsung_pll6553_clk_ops = { |
| .recalc_rate = samsung_pll6553_recalc_rate, |
| }; |
| |
| /* |
| * PLL2550x Clock Type |
| */ |
| |
| #define PLL2550X_R_MASK (0x1) |
| #define PLL2550X_P_MASK (0x3F) |
| #define PLL2550X_M_MASK (0x3FF) |
| #define PLL2550X_S_MASK (0x7) |
| #define PLL2550X_R_SHIFT (20) |
| #define PLL2550X_P_SHIFT (14) |
| #define PLL2550X_M_SHIFT (4) |
| #define PLL2550X_S_SHIFT (0) |
| |
| struct samsung_clk_pll2550x { |
| struct clk_hw hw; |
| const void __iomem *reg_base; |
| unsigned long offset; |
| }; |
| |
| #define to_clk_pll2550x(_hw) container_of(_hw, struct samsung_clk_pll2550x, hw) |
| |
| static unsigned long samsung_pll2550x_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll2550x *pll = to_clk_pll2550x(hw); |
| u32 r, p, m, s, pll_stat; |
| u64 fvco = parent_rate; |
| |
| pll_stat = __raw_readl(pll->reg_base + pll->offset * 3); |
| r = (pll_stat >> PLL2550X_R_SHIFT) & PLL2550X_R_MASK; |
| if (!r) |
| return 0; |
| p = (pll_stat >> PLL2550X_P_SHIFT) & PLL2550X_P_MASK; |
| m = (pll_stat >> PLL2550X_M_SHIFT) & PLL2550X_M_MASK; |
| s = (pll_stat >> PLL2550X_S_SHIFT) & PLL2550X_S_MASK; |
| |
| fvco *= m; |
| do_div(fvco, (p << s)); |
| |
| return (unsigned long)fvco; |
| } |
| |
| static const struct clk_ops samsung_pll2550x_clk_ops = { |
| .recalc_rate = samsung_pll2550x_recalc_rate, |
| }; |
| |
| struct clk * __init samsung_clk_register_pll2550x(const char *name, |
| const char *pname, const void __iomem *reg_base, |
| const unsigned long offset) |
| { |
| struct samsung_clk_pll2550x *pll; |
| struct clk *clk; |
| struct clk_init_data init; |
| |
| pll = kzalloc(sizeof(*pll), GFP_KERNEL); |
| if (!pll) { |
| pr_err("%s: could not allocate pll clk %s\n", __func__, name); |
| return NULL; |
| } |
| |
| init.name = name; |
| init.ops = &samsung_pll2550x_clk_ops; |
| init.flags = CLK_GET_RATE_NOCACHE; |
| init.parent_names = &pname; |
| init.num_parents = 1; |
| |
| pll->hw.init = &init; |
| pll->reg_base = reg_base; |
| pll->offset = offset; |
| |
| clk = clk_register(NULL, &pll->hw); |
| if (IS_ERR(clk)) { |
| pr_err("%s: failed to register pll clock %s\n", __func__, |
| name); |
| kfree(pll); |
| } |
| |
| if (clk_register_clkdev(clk, name, NULL)) |
| pr_err("%s: failed to register lookup for %s", __func__, name); |
| |
| return clk; |
| } |
| |
| static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk, |
| void __iomem *base) |
| { |
| struct samsung_clk_pll *pll; |
| struct clk *clk; |
| struct clk_init_data init; |
| int ret, len; |
| |
| pll = kzalloc(sizeof(*pll), GFP_KERNEL); |
| if (!pll) { |
| pr_err("%s: could not allocate pll clk %s\n", |
| __func__, pll_clk->name); |
| return; |
| } |
| |
| init.name = pll_clk->name; |
| init.flags = pll_clk->flags; |
| init.parent_names = &pll_clk->parent_name; |
| init.num_parents = 1; |
| |
| if (pll_clk->rate_table) { |
| /* find count of rates in rate_table */ |
| for (len = 0; pll_clk->rate_table[len].rate != 0; ) |
| len++; |
| |
| pll->rate_count = len; |
| pll->rate_table = kmemdup(pll_clk->rate_table, |
| pll->rate_count * |
| sizeof(struct samsung_pll_rate_table), |
| GFP_KERNEL); |
| WARN(!pll->rate_table, |
| "%s: could not allocate rate table for %s\n", |
| __func__, pll_clk->name); |
| } |
| |
| switch (pll_clk->type) { |
| /* clk_ops for 35xx and 2550 are similar */ |
| case pll_35xx: |
| case pll_2550: |
| if (!pll->rate_table) |
| init.ops = &samsung_pll35xx_clk_min_ops; |
| else |
| init.ops = &samsung_pll35xx_clk_ops; |
| break; |
| case pll_4500: |
| init.ops = &samsung_pll45xx_clk_min_ops; |
| break; |
| case pll_4502: |
| case pll_4508: |
| if (!pll->rate_table) |
| init.ops = &samsung_pll45xx_clk_min_ops; |
| else |
| init.ops = &samsung_pll45xx_clk_ops; |
| break; |
| /* clk_ops for 36xx and 2650 are similar */ |
| case pll_36xx: |
| case pll_2650: |
| if (!pll->rate_table) |
| init.ops = &samsung_pll36xx_clk_min_ops; |
| else |
| init.ops = &samsung_pll36xx_clk_ops; |
| break; |
| case pll_6552: |
| init.ops = &samsung_pll6552_clk_ops; |
| break; |
| case pll_6553: |
| init.ops = &samsung_pll6553_clk_ops; |
| break; |
| case pll_4600: |
| case pll_4650: |
| case pll_4650c: |
| if (!pll->rate_table) |
| init.ops = &samsung_pll46xx_clk_min_ops; |
| else |
| init.ops = &samsung_pll46xx_clk_ops; |
| break; |
| default: |
| pr_warn("%s: Unknown pll type for pll clk %s\n", |
| __func__, pll_clk->name); |
| } |
| |
| pll->hw.init = &init; |
| pll->type = pll_clk->type; |
| pll->lock_reg = base + pll_clk->lock_offset; |
| pll->con_reg = base + pll_clk->con_offset; |
| |
| clk = clk_register(NULL, &pll->hw); |
| if (IS_ERR(clk)) { |
| pr_err("%s: failed to register pll clock %s : %ld\n", |
| __func__, pll_clk->name, PTR_ERR(clk)); |
| kfree(pll); |
| return; |
| } |
| |
| samsung_clk_add_lookup(clk, pll_clk->id); |
| |
| if (!pll_clk->alias) |
| return; |
| |
| ret = clk_register_clkdev(clk, pll_clk->alias, pll_clk->dev_name); |
| if (ret) |
| pr_err("%s: failed to register lookup for %s : %d", |
| __func__, pll_clk->name, ret); |
| } |
| |
| void __init samsung_clk_register_pll(struct samsung_pll_clock *pll_list, |
| unsigned int nr_pll, void __iomem *base) |
| { |
| int cnt; |
| |
| for (cnt = 0; cnt < nr_pll; cnt++) |
| _samsung_clk_register_pll(&pll_list[cnt], base); |
| } |