drivers/usb/host/ehci-omap.c - kernel/msm-4.19 - Gitiles

 /*
  * ehci-omap.c - driver for USBHOST on OMAP3/4 processors
  *
  * Bus Glue for the EHCI controllers in OMAP3/4
  * Tested on several OMAP3 boards, and OMAP4 Pandaboard
  *
  * Copyright (C) 2007-2013 Texas Instruments, Inc.
  *	Author: Vikram Pandita <vikram.pandita@ti.com>
  *	Author: Anand Gadiyar <gadiyar@ti.com>
  *	Author: Keshava Munegowda <keshava_mgowda@ti.com>
  *	Author: Roger Quadros <rogerq@ti.com>
  *
  * Copyright (C) 2009 Nokia Corporation
  *	Contact: Felipe Balbi <felipe.balbi@nokia.com>
  *
  * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  *
  */

 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/usb/ulpi.h>
 #include <linux/pm_runtime.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 #include <linux/of.h>
 #include <linux/dma-mapping.h>

 #include "ehci.h"

 #include <linux/platform_data/usb-omap.h>

 /* EHCI Register Set */
 #define EHCI_INSNREG04					(0xA0)
 #define EHCI_INSNREG04_DISABLE_UNSUSPEND		(1 << 5)
 #define	EHCI_INSNREG05_ULPI				(0xA4)
 #define	EHCI_INSNREG05_ULPI_CONTROL_SHIFT		31
 #define	EHCI_INSNREG05_ULPI_PORTSEL_SHIFT		24
 #define	EHCI_INSNREG05_ULPI_OPSEL_SHIFT			22
 #define	EHCI_INSNREG05_ULPI_REGADD_SHIFT		16
 #define	EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT		8
 #define	EHCI_INSNREG05_ULPI_WRDATA_SHIFT		0

 #define DRIVER_DESC "OMAP-EHCI Host Controller driver"

 static const char hcd_name[] = "ehci-omap";

 /*-------------------------------------------------------------------------*/

 struct omap_hcd {
 	struct usb_phy *phy[OMAP3_HS_USB_PORTS]; /* one PHY for each port */
 	int nports;
 };

 static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
 {
 	__raw_writel(val, base + reg);
 }

 static inline u32 ehci_read(void __iomem *base, u32 reg)
 {
 	return __raw_readl(base + reg);
 }

 /* configure so an HC device and id are always provided */
 /* always called with process context; sleeping is OK */

 static struct hc_driver __read_mostly ehci_omap_hc_driver;

 static const struct ehci_driver_overrides ehci_omap_overrides __initdata = {
 	.extra_priv_size = sizeof(struct omap_hcd),
 };

 /**
  * ehci_hcd_omap_probe - initialize TI-based HCDs
  *
  * Allocates basic resources for this USB host controller, and
  * then invokes the start() method for the HCD associated with it
  * through the hotplug entry's driver_data.
  */
 static int ehci_hcd_omap_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev);
 	struct resource	*res;
 	struct usb_hcd	*hcd;
 	void __iomem *regs;
 	int ret;
 	int irq;
 	int i;
 	struct omap_hcd	*omap;

 	if (usb_disabled())
 		return -ENODEV;

 	if (!dev->parent) {
 		dev_err(dev, "Missing parent device\n");
 		return -ENODEV;
 	}

 	/* For DT boot, get platform data from parent. i.e. usbhshost */
 	if (dev->of_node) {
 		pdata = dev_get_platdata(dev->parent);
 		dev->platform_data = pdata;
 	}

 	if (!pdata) {
 		dev_err(dev, "Missing platform data\n");
 		return -ENODEV;
 	}

 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(dev, "EHCI irq failed\n");
 		return -ENODEV;
 	}

 	res =  platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	regs = devm_ioremap_resource(dev, res);
 	if (IS_ERR(regs))
 		return PTR_ERR(regs);

 	/*
 	 * Right now device-tree probed devices don't get dma_mask set.
 	 * Since shared usb code relies on it, set it here for now.
 	 * Once we have dma capability bindings this can go away.
 	 */
 	ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
 	if (ret)
 		return ret;

 	ret = -ENODEV;
 	hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
 			dev_name(dev));
 	if (!hcd) {
 		dev_err(dev, "Failed to create HCD\n");
 		return -ENOMEM;
 	}

 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);
 	hcd->regs = regs;
 	hcd_to_ehci(hcd)->caps = regs;

 	omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
 	omap->nports = pdata->nports;

 	platform_set_drvdata(pdev, hcd);

 	/* get the PHY devices if needed */
 	for (i = 0 ; i < omap->nports ; i++) {
 		struct usb_phy *phy;

 		/* get the PHY device */
 		if (dev->of_node)
 			phy = devm_usb_get_phy_by_phandle(dev, "phys", i);
 		else
 			phy = devm_usb_get_phy_dev(dev, i);
 		if (IS_ERR(phy)) {
 			/* Don't bail out if PHY is not absolutely necessary */
 			if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY)
 				continue;

 			ret = PTR_ERR(phy);
 			dev_err(dev, "Can't get PHY device for port %d: %d\n",
 					i, ret);
 			goto err_phy;
 		}

 		omap->phy[i] = phy;

 		if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY) {
 			usb_phy_init(omap->phy[i]);
 			/* bring PHY out of suspend */
 			usb_phy_set_suspend(omap->phy[i], 0);
 		}
 	}

 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);

 	/*
 	 * An undocumented "feature" in the OMAP3 EHCI controller,
 	 * causes suspended ports to be taken out of suspend when
 	 * the USBCMD.Run/Stop bit is cleared (for example when
 	 * we do ehci_bus_suspend).
 	 * This breaks suspend-resume if the root-hub is allowed
 	 * to suspend. Writing 1 to this undocumented register bit
 	 * disables this feature and restores normal behavior.
 	 */
 	ehci_write(regs, EHCI_INSNREG04,
 				EHCI_INSNREG04_DISABLE_UNSUSPEND);

 	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret) {
 		dev_err(dev, "failed to add hcd with err %d\n", ret);
 		goto err_pm_runtime;
 	}
 	device_wakeup_enable(hcd->self.controller);

 	/*
 	 * Bring PHYs out of reset for non PHY modes.
 	 * Even though HSIC mode is a PHY-less mode, the reset
 	 * line exists between the chips and can be modelled
 	 * as a PHY device for reset control.
 	 */
 	for (i = 0; i < omap->nports; i++) {
 		if (!omap->phy[i] ||
 		     pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY)
 			continue;

 		usb_phy_init(omap->phy[i]);
 		/* bring PHY out of suspend */
 		usb_phy_set_suspend(omap->phy[i], 0);
 	}

 	return 0;

 err_pm_runtime:
 	pm_runtime_put_sync(dev);

 err_phy:
 	for (i = 0; i < omap->nports; i++) {
 		if (omap->phy[i])
 			usb_phy_shutdown(omap->phy[i]);
 	}

 	usb_put_hcd(hcd);

 	return ret;
 }


 /**
  * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs
  * @pdev: USB Host Controller being removed
  *
  * Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking
  * the HCD's stop() method.  It is always called from a thread
  * context, normally "rmmod", "apmd", or something similar.
  */
 static int ehci_hcd_omap_remove(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
 	struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
 	int i;

 	usb_remove_hcd(hcd);

 	for (i = 0; i < omap->nports; i++) {
 		if (omap->phy[i])
 			usb_phy_shutdown(omap->phy[i]);
 	}

 	usb_put_hcd(hcd);
 	pm_runtime_put_sync(dev);
 	pm_runtime_disable(dev);

 	return 0;
 }

 static const struct of_device_id omap_ehci_dt_ids[] = {
 	{ .compatible = "ti,ehci-omap" },
 	{ }
 };

 MODULE_DEVICE_TABLE(of, omap_ehci_dt_ids);

 static struct platform_driver ehci_hcd_omap_driver = {
 	.probe			= ehci_hcd_omap_probe,
 	.remove			= ehci_hcd_omap_remove,
 	.shutdown		= usb_hcd_platform_shutdown,
 	/*.suspend		= ehci_hcd_omap_suspend, */
 	/*.resume		= ehci_hcd_omap_resume, */
 	.driver = {
 		.name		= hcd_name,
 		.of_match_table = omap_ehci_dt_ids,
 	}
 };

 /*-------------------------------------------------------------------------*/

 static int __init ehci_omap_init(void)
 {
 	if (usb_disabled())
 		return -ENODEV;

 	pr_info("%s: " DRIVER_DESC "\n", hcd_name);

 	ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides);
 	return platform_driver_register(&ehci_hcd_omap_driver);
 }
 module_init(ehci_omap_init);

 static void __exit ehci_omap_cleanup(void)
 {
 	platform_driver_unregister(&ehci_hcd_omap_driver);
 }
 module_exit(ehci_omap_cleanup);

 MODULE_ALIAS("platform:ehci-omap");
 MODULE_AUTHOR("Texas Instruments, Inc.");
 MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
 MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");

 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
	/*
	* ehci-omap.c - driver for USBHOST on OMAP3/4 processors
	*
	* Bus Glue for the EHCI controllers in OMAP3/4
	* Tested on several OMAP3 boards, and OMAP4 Pandaboard
	*
	* Copyright (C) 2007-2013 Texas Instruments, Inc.
	* Author: Vikram Pandita <vikram.pandita@ti.com>
	* Author: Anand Gadiyar <gadiyar@ti.com>
	* Author: Keshava Munegowda <keshava_mgowda@ti.com>
	* Author: Roger Quadros <rogerq@ti.com>
	*
	* Copyright (C) 2009 Nokia Corporation
	* Contact: Felipe Balbi <felipe.balbi@nokia.com>
	*
	* Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*
	*/

	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/io.h>
	#include <linux/platform_device.h>
	#include <linux/slab.h>
	#include <linux/usb/ulpi.h>
	#include <linux/pm_runtime.h>
	#include <linux/gpio.h>
	#include <linux/clk.h>
	#include <linux/usb.h>
	#include <linux/usb/hcd.h>
	#include <linux/of.h>
	#include <linux/dma-mapping.h>

	#include "ehci.h"

	#include <linux/platform_data/usb-omap.h>

	/* EHCI Register Set */
	#define EHCI_INSNREG04 (0xA0)
	#define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5)
	#define EHCI_INSNREG05_ULPI (0xA4)
	#define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31
	#define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24
	#define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22
	#define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16
	#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
	#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0

	#define DRIVER_DESC "OMAP-EHCI Host Controller driver"

	static const char hcd_name[] = "ehci-omap";

	/-------------------------------------------------------------------------/

	struct omap_hcd {
	struct usb_phy phy[OMAP3_HS_USB_PORTS]; / one PHY for each port */
	int nports;
	};

	static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
	{
	__raw_writel(val, base + reg);
	}

	static inline u32 ehci_read(void __iomem *base, u32 reg)
	{
	return __raw_readl(base + reg);
	}

	/* configure so an HC device and id are always provided */
	/* always called with process context; sleeping is OK */

	static struct hc_driver __read_mostly ehci_omap_hc_driver;

	static const struct ehci_driver_overrides ehci_omap_overrides __initdata = {
	.extra_priv_size = sizeof(struct omap_hcd),
	};

	/**
	* ehci_hcd_omap_probe - initialize TI-based HCDs
	*
	* Allocates basic resources for this USB host controller, and
	* then invokes the start() method for the HCD associated with it
	* through the hotplug entry's driver_data.
	*/
	static int ehci_hcd_omap_probe(struct platform_device *pdev)
	{
	struct device *dev = &pdev->dev;
	struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev);
	struct resource *res;
	struct usb_hcd *hcd;
	void __iomem *regs;
	int ret;
	int irq;
	int i;
	struct omap_hcd *omap;

	if (usb_disabled())
	return -ENODEV;

	if (!dev->parent) {
	dev_err(dev, "Missing parent device\n");
	return -ENODEV;
	}

	/* For DT boot, get platform data from parent. i.e. usbhshost */
	if (dev->of_node) {
	pdata = dev_get_platdata(dev->parent);
	dev->platform_data = pdata;
	}

	if (!pdata) {
	dev_err(dev, "Missing platform data\n");
	return -ENODEV;
	}

	irq = platform_get_irq(pdev, 0);
	if (irq < 0) {
	dev_err(dev, "EHCI irq failed\n");
	return -ENODEV;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	regs = devm_ioremap_resource(dev, res);
	if (IS_ERR(regs))
	return PTR_ERR(regs);

	/*
	* Right now device-tree probed devices don't get dma_mask set.
	* Since shared usb code relies on it, set it here for now.
	* Once we have dma capability bindings this can go away.
	*/
	ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
	if (ret)
	return ret;

	ret = -ENODEV;
	hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
	dev_name(dev));
	if (!hcd) {
	dev_err(dev, "Failed to create HCD\n");
	return -ENOMEM;
	}

	hcd->rsrc_start = res->start;
	hcd->rsrc_len = resource_size(res);
	hcd->regs = regs;
	hcd_to_ehci(hcd)->caps = regs;

	omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
	omap->nports = pdata->nports;

	platform_set_drvdata(pdev, hcd);

	/* get the PHY devices if needed */
	for (i = 0 ; i < omap->nports ; i++) {
	struct usb_phy *phy;

	/* get the PHY device */
	if (dev->of_node)
	phy = devm_usb_get_phy_by_phandle(dev, "phys", i);
	else
	phy = devm_usb_get_phy_dev(dev, i);
	if (IS_ERR(phy)) {
	/* Don't bail out if PHY is not absolutely necessary */
	if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY)
	continue;

	ret = PTR_ERR(phy);
	dev_err(dev, "Can't get PHY device for port %d: %d\n",
	i, ret);
	goto err_phy;
	}

	omap->phy[i] = phy;

	if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY) {
	usb_phy_init(omap->phy[i]);
	/* bring PHY out of suspend */
	usb_phy_set_suspend(omap->phy[i], 0);
	}
	}

	pm_runtime_enable(dev);
	pm_runtime_get_sync(dev);

	/*
	* An undocumented "feature" in the OMAP3 EHCI controller,
	* causes suspended ports to be taken out of suspend when
	* the USBCMD.Run/Stop bit is cleared (for example when
	* we do ehci_bus_suspend).
	* This breaks suspend-resume if the root-hub is allowed
	* to suspend. Writing 1 to this undocumented register bit
	* disables this feature and restores normal behavior.
	*/
	ehci_write(regs, EHCI_INSNREG04,
	EHCI_INSNREG04_DISABLE_UNSUSPEND);

	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
	if (ret) {
	dev_err(dev, "failed to add hcd with err %d\n", ret);
	goto err_pm_runtime;
	}
	device_wakeup_enable(hcd->self.controller);

	/*
	* Bring PHYs out of reset for non PHY modes.
	* Even though HSIC mode is a PHY-less mode, the reset
	* line exists between the chips and can be modelled
	* as a PHY device for reset control.
	*/
	for (i = 0; i < omap->nports; i++) {
	if (!omap->phy[i] \|\|
	pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY)
	continue;

	usb_phy_init(omap->phy[i]);
	/* bring PHY out of suspend */
	usb_phy_set_suspend(omap->phy[i], 0);
	}

	return 0;

	err_pm_runtime:
	pm_runtime_put_sync(dev);

	err_phy:
	for (i = 0; i < omap->nports; i++) {
	if (omap->phy[i])
	usb_phy_shutdown(omap->phy[i]);
	}

	usb_put_hcd(hcd);

	return ret;
	}


	/**
	* ehci_hcd_omap_remove - shutdown processing for EHCI HCDs
	* @pdev: USB Host Controller being removed
	*
	* Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking
	* the HCD's stop() method. It is always called from a thread
	* context, normally "rmmod", "apmd", or something similar.
	*/
	static int ehci_hcd_omap_remove(struct platform_device *pdev)
	{
	struct device *dev = &pdev->dev;
	struct usb_hcd *hcd = dev_get_drvdata(dev);
	struct omap_hcd omap = (struct omap_hcd )hcd_to_ehci(hcd)->priv;
	int i;

	usb_remove_hcd(hcd);

	for (i = 0; i < omap->nports; i++) {
	if (omap->phy[i])
	usb_phy_shutdown(omap->phy[i]);
	}

	usb_put_hcd(hcd);
	pm_runtime_put_sync(dev);
	pm_runtime_disable(dev);

	return 0;
	}

	static const struct of_device_id omap_ehci_dt_ids[] = {
	{ .compatible = "ti,ehci-omap" },
	{ }
	};

	MODULE_DEVICE_TABLE(of, omap_ehci_dt_ids);

	static struct platform_driver ehci_hcd_omap_driver = {
	.probe = ehci_hcd_omap_probe,
	.remove = ehci_hcd_omap_remove,
	.shutdown = usb_hcd_platform_shutdown,
	/.suspend = ehci_hcd_omap_suspend, /
	/.resume = ehci_hcd_omap_resume, /
	.driver = {
	.name = hcd_name,
	.of_match_table = omap_ehci_dt_ids,
	}
	};

	/-------------------------------------------------------------------------/

	static int __init ehci_omap_init(void)
	{
	if (usb_disabled())
	return -ENODEV;

	pr_info("%s: " DRIVER_DESC "\n", hcd_name);

	ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides);
	return platform_driver_register(&ehci_hcd_omap_driver);
	}
	module_init(ehci_omap_init);

	static void __exit ehci_omap_cleanup(void)
	{
	platform_driver_unregister(&ehci_hcd_omap_driver);
	}
	module_exit(ehci_omap_cleanup);

	MODULE_ALIAS("platform:ehci-omap");
	MODULE_AUTHOR("Texas Instruments, Inc.");
	MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
	MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");

	MODULE_DESCRIPTION(DRIVER_DESC);
	MODULE_LICENSE("GPL");