| /* |
| * Copyright 2012 Linaro Ltd |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /include/ "skeleton.dtsi" |
| |
| / { |
| soc-u9500 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "stericsson,db8500"; |
| interrupt-parent = <&intc>; |
| ranges; |
| |
| intc: interrupt-controller@a0411000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| #address-cells = <1>; |
| interrupt-controller; |
| reg = <0xa0411000 0x1000>, |
| <0xa0410100 0x100>; |
| }; |
| |
| L2: l2-cache { |
| compatible = "arm,pl310-cache"; |
| reg = <0xa0412000 0x1000>; |
| interrupts = <0 13 4>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a9-pmu"; |
| interrupts = <0 7 0x4>; |
| }; |
| |
| timer@a0410600 { |
| compatible = "arm,cortex-a9-twd-timer"; |
| reg = <0xa0410600 0x20>; |
| interrupts = <1 13 0x304>; |
| }; |
| |
| rtc@80154000 { |
| compatible = "stericsson,db8500-rtc"; |
| reg = <0x80154000 0x1000>; |
| interrupts = <0 18 0x4>; |
| }; |
| |
| gpio0: gpio@8012e000 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8012e000 0x80>; |
| interrupts = <0 119 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <0>; |
| }; |
| |
| gpio1: gpio@8012e080 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8012e080 0x80>; |
| interrupts = <0 120 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <1>; |
| }; |
| |
| gpio2: gpio@8000e000 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8000e000 0x80>; |
| interrupts = <0 121 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <2>; |
| }; |
| |
| gpio3: gpio@8000e080 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8000e080 0x80>; |
| interrupts = <0 122 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <3>; |
| }; |
| |
| gpio4: gpio@8000e100 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8000e100 0x80>; |
| interrupts = <0 123 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <4>; |
| }; |
| |
| gpio5: gpio@8000e180 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8000e180 0x80>; |
| interrupts = <0 124 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <5>; |
| }; |
| |
| gpio6: gpio@8011e000 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8011e000 0x80>; |
| interrupts = <0 125 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <6>; |
| }; |
| |
| gpio7: gpio@8011e080 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8011e080 0x80>; |
| interrupts = <0 126 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <7>; |
| }; |
| |
| gpio8: gpio@a03fe000 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0xa03fe000 0x80>; |
| interrupts = <0 127 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <8>; |
| }; |
| |
| pinctrl { |
| compatible = "stericsson,nmk_pinctrl"; |
| }; |
| |
| usb@a03e0000 { |
| compatible = "stericsson,db8500-musb", |
| "mentor,musb"; |
| reg = <0xa03e0000 0x10000>; |
| interrupts = <0 23 0x4>; |
| }; |
| |
| dma-controller@801C0000 { |
| compatible = "stericsson,db8500-dma40", |
| "stericsson,dma40"; |
| reg = <0x801C0000 0x1000 0x40010000 0x800>; |
| interrupts = <0 25 0x4>; |
| }; |
| |
| prcmu@80157000 { |
| compatible = "stericsson,db8500-prcmu"; |
| reg = <0x80157000 0x1000>; |
| interrupts = <0 47 0x4>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| prcmu-timer-4@80157450 { |
| compatible = "stericsson,db8500-prcmu-timer-4"; |
| reg = <0x80157450 0xC>; |
| }; |
| |
| db8500-prcmu-regulators { |
| compatible = "stericsson,db8500-prcmu-regulator"; |
| |
| // DB8500_REGULATOR_VAPE |
| db8500_vape_reg: db8500_vape { |
| regulator-name = "db8500-vape"; |
| regulator-always-on; |
| }; |
| |
| // DB8500_REGULATOR_VARM |
| db8500_varm_reg: db8500_varm { |
| regulator-name = "db8500-varm"; |
| }; |
| |
| // DB8500_REGULATOR_VMODEM |
| db8500_vmodem_reg: db8500_vmodem { |
| regulator-name = "db8500-vmodem"; |
| }; |
| |
| // DB8500_REGULATOR_VPLL |
| db8500_vpll_reg: db8500_vpll { |
| regulator-name = "db8500-vpll"; |
| }; |
| |
| // DB8500_REGULATOR_VSMPS1 |
| db8500_vsmps1_reg: db8500_vsmps1 { |
| regulator-name = "db8500-vsmps1"; |
| }; |
| |
| // DB8500_REGULATOR_VSMPS2 |
| db8500_vsmps2_reg: db8500_vsmps2 { |
| regulator-name = "db8500-vsmps2"; |
| }; |
| |
| // DB8500_REGULATOR_VSMPS3 |
| db8500_vsmps3_reg: db8500_vsmps3 { |
| regulator-name = "db8500-vsmps3"; |
| }; |
| |
| // DB8500_REGULATOR_VRF1 |
| db8500_vrf1_reg: db8500_vrf1 { |
| regulator-name = "db8500-vrf1"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SVAMMDSP |
| db8500_sva_mmdsp_reg: db8500_sva_mmdsp { |
| regulator-name = "db8500-sva-mmdsp"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SVAMMDSPRET |
| db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { |
| regulator-name = "db8500-sva-mmdsp-ret"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SVAPIPE |
| db8500_sva_pipe_reg: db8500_sva_pipe { |
| regulator-name = "db8500_sva_pipe"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SIAMMDSP |
| db8500_sia_mmdsp_reg: db8500_sia_mmdsp { |
| regulator-name = "db8500_sia_mmdsp"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SIAMMDSPRET |
| db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { |
| regulator-name = "db8500-sia-mmdsp-ret"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SIAPIPE |
| db8500_sia_pipe_reg: db8500_sia_pipe { |
| regulator-name = "db8500-sia-pipe"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SGA |
| db8500_sga_reg: db8500_sga { |
| regulator-name = "db8500-sga"; |
| vin-supply = <&db8500_vape_reg>; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_B2R2_MCDE |
| db8500_b2r2_mcde_reg: db8500_b2r2_mcde { |
| regulator-name = "db8500-b2r2-mcde"; |
| vin-supply = <&db8500_vape_reg>; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_ESRAM12 |
| db8500_esram12_reg: db8500_esram12 { |
| regulator-name = "db8500-esram12"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_ESRAM12RET |
| db8500_esram12_ret_reg: db8500_esram12_ret { |
| regulator-name = "db8500-esram12-ret"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_ESRAM34 |
| db8500_esram34_reg: db8500_esram34 { |
| regulator-name = "db8500-esram34"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_ESRAM34RET |
| db8500_esram34_ret_reg: db8500_esram34_ret { |
| regulator-name = "db8500-esram34-ret"; |
| }; |
| }; |
| |
| ab8500@5 { |
| compatible = "stericsson,ab8500"; |
| reg = <5>; /* mailbox 5 is i2c */ |
| interrupts = <0 40 0x4>; |
| |
| ab8500-regulators { |
| compatible = "stericsson,ab8500-regulator"; |
| |
| // supplies to the display/camera |
| ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { |
| regulator-name = "V-DISPLAY"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2900000>; |
| regulator-boot-on; |
| /* BUG: If turned off MMC will be affected. */ |
| regulator-always-on; |
| }; |
| |
| // supplies to the on-board eMMC |
| ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { |
| regulator-name = "V-eMMC1"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| // supply for VAUX3; SDcard slots |
| ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { |
| regulator-name = "V-MMC-SD"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| // supply for v-intcore12; VINTCORE12 LDO |
| ab8500_ldo_initcore_reg: ab8500_ldo_initcore { |
| regulator-name = "V-INTCORE"; |
| }; |
| |
| // supply for tvout; gpadc; TVOUT LDO |
| ab8500_ldo_tvout_reg: ab8500_ldo_tvout { |
| regulator-name = "V-TVOUT"; |
| }; |
| |
| // supply for ab8500-usb; USB LDO |
| ab8500_ldo_usb_reg: ab8500_ldo_usb { |
| regulator-name = "dummy"; |
| }; |
| |
| // supply for ab8500-vaudio; VAUDIO LDO |
| ab8500_ldo_audio_reg: ab8500_ldo_audio { |
| regulator-name = "V-AUD"; |
| }; |
| |
| // supply for v-anamic1 VAMic1-LDO |
| ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { |
| regulator-name = "V-AMIC1"; |
| }; |
| |
| // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 |
| ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { |
| regulator-name = "V-AMIC2"; |
| }; |
| |
| // supply for v-dmic; VDMIC LDO |
| ab8500_ldo_dmic_reg: ab8500_ldo_dmic { |
| regulator-name = "V-DMIC"; |
| }; |
| |
| // supply for U8500 CSI/DSI; VANA LDO |
| ab8500_ldo_ana_reg: ab8500_ldo_ana { |
| regulator-name = "V-CSI/DSI"; |
| }; |
| }; |
| }; |
| }; |
| |
| i2c@80004000 { |
| compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; |
| reg = <0x80004000 0x1000>; |
| interrupts = <0 21 0x4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c@80122000 { |
| compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; |
| reg = <0x80122000 0x1000>; |
| interrupts = <0 22 0x4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c@80128000 { |
| compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; |
| reg = <0x80128000 0x1000>; |
| interrupts = <0 55 0x4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c@80110000 { |
| compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; |
| reg = <0x80110000 0x1000>; |
| interrupts = <0 12 0x4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c@8012a000 { |
| compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; |
| reg = <0x8012a000 0x1000>; |
| interrupts = <0 51 0x4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| ssp@80002000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <80002000 0x1000>; |
| interrupts = <0 14 0x4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| // Add one of these for each child device |
| cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4 |
| &gpio6 22 0x4 &gpio7 0 0x4>; |
| |
| }; |
| |
| uart@80120000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x80120000 0x1000>; |
| interrupts = <0 11 0x4>; |
| status = "disabled"; |
| }; |
| uart@80121000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x80121000 0x1000>; |
| interrupts = <0 19 0x4>; |
| status = "disabled"; |
| }; |
| uart@80007000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x80007000 0x1000>; |
| interrupts = <0 26 0x4>; |
| status = "disabled"; |
| }; |
| |
| sdi@80126000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80126000 0x1000>; |
| interrupts = <0 60 0x4>; |
| status = "disabled"; |
| }; |
| sdi@80118000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80118000 0x1000>; |
| interrupts = <0 50 0x4>; |
| status = "disabled"; |
| }; |
| sdi@80005000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80005000 0x1000>; |
| interrupts = <0 41 0x4>; |
| status = "disabled"; |
| }; |
| sdi@80119000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80119000 0x1000>; |
| interrupts = <0 59 0x4>; |
| status = "disabled"; |
| }; |
| sdi@80114000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80114000 0x1000>; |
| interrupts = <0 99 0x4>; |
| status = "disabled"; |
| }; |
| sdi@80008000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80114000 0x1000>; |
| interrupts = <0 100 0x4>; |
| status = "disabled"; |
| }; |
| |
| external-bus@50000000 { |
| compatible = "simple-bus"; |
| reg = <0x50000000 0x4000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x50000000 0x4000000>; |
| status = "disabled"; |
| }; |
| }; |
| }; |