| /* |
| * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/i2c.h> |
| #include <linux/fs.h> |
| #include <linux/io.h> |
| #include <linux/types.h> |
| #include <linux/interrupt.h> |
| #include <linux/jiffies.h> |
| #include <linux/pci.h> |
| #include <linux/mutex.h> |
| #include <linux/ktime.h> |
| #include <linux/slab.h> |
| |
| #define PCH_EVENT_SET 0 /* I2C Interrupt Event Set Status */ |
| #define PCH_EVENT_NONE 1 /* I2C Interrupt Event Clear Status */ |
| #define PCH_MAX_CLK 100000 /* Maximum Clock speed in MHz */ |
| #define PCH_BUFFER_MODE_ENABLE 0x0002 /* flag for Buffer mode enable */ |
| #define PCH_EEPROM_SW_RST_MODE_ENABLE 0x0008 /* EEPROM SW RST enable flag */ |
| |
| #define PCH_I2CSADR 0x00 /* I2C slave address register */ |
| #define PCH_I2CCTL 0x04 /* I2C control register */ |
| #define PCH_I2CSR 0x08 /* I2C status register */ |
| #define PCH_I2CDR 0x0C /* I2C data register */ |
| #define PCH_I2CMON 0x10 /* I2C bus monitor register */ |
| #define PCH_I2CBC 0x14 /* I2C bus transfer rate setup counter */ |
| #define PCH_I2CMOD 0x18 /* I2C mode register */ |
| #define PCH_I2CBUFSLV 0x1C /* I2C buffer mode slave address register */ |
| #define PCH_I2CBUFSUB 0x20 /* I2C buffer mode subaddress register */ |
| #define PCH_I2CBUFFOR 0x24 /* I2C buffer mode format register */ |
| #define PCH_I2CBUFCTL 0x28 /* I2C buffer mode control register */ |
| #define PCH_I2CBUFMSK 0x2C /* I2C buffer mode interrupt mask register */ |
| #define PCH_I2CBUFSTA 0x30 /* I2C buffer mode status register */ |
| #define PCH_I2CBUFLEV 0x34 /* I2C buffer mode level register */ |
| #define PCH_I2CESRFOR 0x38 /* EEPROM software reset mode format register */ |
| #define PCH_I2CESRCTL 0x3C /* EEPROM software reset mode ctrl register */ |
| #define PCH_I2CESRMSK 0x40 /* EEPROM software reset mode */ |
| #define PCH_I2CESRSTA 0x44 /* EEPROM software reset mode status register */ |
| #define PCH_I2CTMR 0x48 /* I2C timer register */ |
| #define PCH_I2CSRST 0xFC /* I2C reset register */ |
| #define PCH_I2CNF 0xF8 /* I2C noise filter register */ |
| |
| #define BUS_IDLE_TIMEOUT 20 |
| #define PCH_I2CCTL_I2CMEN 0x0080 |
| #define TEN_BIT_ADDR_DEFAULT 0xF000 |
| #define TEN_BIT_ADDR_MASK 0xF0 |
| #define PCH_START 0x0020 |
| #define PCH_RESTART 0x0004 |
| #define PCH_ESR_START 0x0001 |
| #define PCH_BUFF_START 0x1 |
| #define PCH_REPSTART 0x0004 |
| #define PCH_ACK 0x0008 |
| #define PCH_GETACK 0x0001 |
| #define CLR_REG 0x0 |
| #define I2C_RD 0x1 |
| #define I2CMCF_BIT 0x0080 |
| #define I2CMIF_BIT 0x0002 |
| #define I2CMAL_BIT 0x0010 |
| #define I2CBMFI_BIT 0x0001 |
| #define I2CBMAL_BIT 0x0002 |
| #define I2CBMNA_BIT 0x0004 |
| #define I2CBMTO_BIT 0x0008 |
| #define I2CBMIS_BIT 0x0010 |
| #define I2CESRFI_BIT 0X0001 |
| #define I2CESRTO_BIT 0x0002 |
| #define I2CESRFIIE_BIT 0x1 |
| #define I2CESRTOIE_BIT 0x2 |
| #define I2CBMDZ_BIT 0x0040 |
| #define I2CBMAG_BIT 0x0020 |
| #define I2CMBB_BIT 0x0020 |
| #define BUFFER_MODE_MASK (I2CBMFI_BIT | I2CBMAL_BIT | I2CBMNA_BIT | \ |
| I2CBMTO_BIT | I2CBMIS_BIT) |
| #define I2C_ADDR_MSK 0xFF |
| #define I2C_MSB_2B_MSK 0x300 |
| #define FAST_MODE_CLK 400 |
| #define FAST_MODE_EN 0x0001 |
| #define SUB_ADDR_LEN_MAX 4 |
| #define BUF_LEN_MAX 32 |
| #define PCH_BUFFER_MODE 0x1 |
| #define EEPROM_SW_RST_MODE 0x0002 |
| #define NORMAL_INTR_ENBL 0x0300 |
| #define EEPROM_RST_INTR_ENBL (I2CESRFIIE_BIT | I2CESRTOIE_BIT) |
| #define EEPROM_RST_INTR_DISBL 0x0 |
| #define BUFFER_MODE_INTR_ENBL 0x001F |
| #define BUFFER_MODE_INTR_DISBL 0x0 |
| #define NORMAL_MODE 0x0 |
| #define BUFFER_MODE 0x1 |
| #define EEPROM_SR_MODE 0x2 |
| #define I2C_TX_MODE 0x0010 |
| #define PCH_BUF_TX 0xFFF7 |
| #define PCH_BUF_RD 0x0008 |
| #define I2C_ERROR_MASK (I2CESRTO_EVENT | I2CBMIS_EVENT | I2CBMTO_EVENT | \ |
| I2CBMNA_EVENT | I2CBMAL_EVENT | I2CMAL_EVENT) |
| #define I2CMAL_EVENT 0x0001 |
| #define I2CMCF_EVENT 0x0002 |
| #define I2CBMFI_EVENT 0x0004 |
| #define I2CBMAL_EVENT 0x0008 |
| #define I2CBMNA_EVENT 0x0010 |
| #define I2CBMTO_EVENT 0x0020 |
| #define I2CBMIS_EVENT 0x0040 |
| #define I2CESRFI_EVENT 0x0080 |
| #define I2CESRTO_EVENT 0x0100 |
| #define PCI_DEVICE_ID_PCH_I2C 0x8817 |
| |
| #define pch_dbg(adap, fmt, arg...) \ |
| dev_dbg(adap->pch_adapter.dev.parent, "%s :" fmt, __func__, ##arg) |
| |
| #define pch_err(adap, fmt, arg...) \ |
| dev_err(adap->pch_adapter.dev.parent, "%s :" fmt, __func__, ##arg) |
| |
| #define pch_pci_err(pdev, fmt, arg...) \ |
| dev_err(&pdev->dev, "%s :" fmt, __func__, ##arg) |
| |
| #define pch_pci_dbg(pdev, fmt, arg...) \ |
| dev_dbg(&pdev->dev, "%s :" fmt, __func__, ##arg) |
| |
| /* |
| Set the number of I2C instance max |
| Intel EG20T PCH : 1ch |
| OKI SEMICONDUCTOR ML7213 IOH : 2ch |
| */ |
| #define PCH_I2C_MAX_DEV 2 |
| |
| /** |
| * struct i2c_algo_pch_data - for I2C driver functionalities |
| * @pch_adapter: stores the reference to i2c_adapter structure |
| * @p_adapter_info: stores the reference to adapter_info structure |
| * @pch_base_address: specifies the remapped base address |
| * @pch_buff_mode_en: specifies if buffer mode is enabled |
| * @pch_event_flag: specifies occurrence of interrupt events |
| * @pch_i2c_xfer_in_progress: specifies whether the transfer is completed |
| */ |
| struct i2c_algo_pch_data { |
| struct i2c_adapter pch_adapter; |
| struct adapter_info *p_adapter_info; |
| void __iomem *pch_base_address; |
| int pch_buff_mode_en; |
| u32 pch_event_flag; |
| bool pch_i2c_xfer_in_progress; |
| }; |
| |
| /** |
| * struct adapter_info - This structure holds the adapter information for the |
| PCH i2c controller |
| * @pch_data: stores a list of i2c_algo_pch_data |
| * @pch_i2c_suspended: specifies whether the system is suspended or not |
| * perhaps with more lines and words. |
| * @ch_num: specifies the number of i2c instance |
| * |
| * pch_data has as many elements as maximum I2C channels |
| */ |
| struct adapter_info { |
| struct i2c_algo_pch_data pch_data[PCH_I2C_MAX_DEV]; |
| bool pch_i2c_suspended; |
| int ch_num; |
| }; |
| |
| |
| static int pch_i2c_speed = 100; /* I2C bus speed in Kbps */ |
| static int pch_clk = 50000; /* specifies I2C clock speed in KHz */ |
| static wait_queue_head_t pch_event; |
| static DEFINE_MUTEX(pch_mutex); |
| |
| /* Definition for ML7213 by OKI SEMICONDUCTOR */ |
| #define PCI_VENDOR_ID_ROHM 0x10DB |
| #define PCI_DEVICE_ID_ML7213_I2C 0x802D |
| #define PCI_DEVICE_ID_ML7223_I2C 0x8010 |
| |
| static struct pci_device_id __devinitdata pch_pcidev_id[] = { |
| { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C), 1, }, |
| { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, }, |
| { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_I2C), 1, }, |
| {0,} |
| }; |
| |
| static irqreturn_t pch_i2c_handler(int irq, void *pData); |
| |
| static inline void pch_setbit(void __iomem *addr, u32 offset, u32 bitmask) |
| { |
| u32 val; |
| val = ioread32(addr + offset); |
| val |= bitmask; |
| iowrite32(val, addr + offset); |
| } |
| |
| static inline void pch_clrbit(void __iomem *addr, u32 offset, u32 bitmask) |
| { |
| u32 val; |
| val = ioread32(addr + offset); |
| val &= (~bitmask); |
| iowrite32(val, addr + offset); |
| } |
| |
| /** |
| * pch_i2c_init() - hardware initialization of I2C module |
| * @adap: Pointer to struct i2c_algo_pch_data. |
| */ |
| static void pch_i2c_init(struct i2c_algo_pch_data *adap) |
| { |
| void __iomem *p = adap->pch_base_address; |
| u32 pch_i2cbc; |
| u32 pch_i2ctmr; |
| u32 reg_value; |
| |
| /* reset I2C controller */ |
| iowrite32(0x01, p + PCH_I2CSRST); |
| msleep(20); |
| iowrite32(0x0, p + PCH_I2CSRST); |
| |
| /* Initialize I2C registers */ |
| iowrite32(0x21, p + PCH_I2CNF); |
| |
| pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_I2CCTL_I2CMEN); |
| |
| if (pch_i2c_speed != 400) |
| pch_i2c_speed = 100; |
| |
| reg_value = PCH_I2CCTL_I2CMEN; |
| if (pch_i2c_speed == FAST_MODE_CLK) { |
| reg_value |= FAST_MODE_EN; |
| pch_dbg(adap, "Fast mode enabled\n"); |
| } |
| |
| if (pch_clk > PCH_MAX_CLK) |
| pch_clk = 62500; |
| |
| pch_i2cbc = (pch_clk + (pch_i2c_speed * 4)) / pch_i2c_speed * 8; |
| /* Set transfer speed in I2CBC */ |
| iowrite32(pch_i2cbc, p + PCH_I2CBC); |
| |
| pch_i2ctmr = (pch_clk) / 8; |
| iowrite32(pch_i2ctmr, p + PCH_I2CTMR); |
| |
| reg_value |= NORMAL_INTR_ENBL; /* Enable interrupts in normal mode */ |
| iowrite32(reg_value, p + PCH_I2CCTL); |
| |
| pch_dbg(adap, |
| "I2CCTL=%x pch_i2cbc=%x pch_i2ctmr=%x Enable interrupts\n", |
| ioread32(p + PCH_I2CCTL), pch_i2cbc, pch_i2ctmr); |
| |
| init_waitqueue_head(&pch_event); |
| } |
| |
| static inline bool ktime_lt(const ktime_t cmp1, const ktime_t cmp2) |
| { |
| return cmp1.tv64 < cmp2.tv64; |
| } |
| |
| /** |
| * pch_i2c_wait_for_bus_idle() - check the status of bus. |
| * @adap: Pointer to struct i2c_algo_pch_data. |
| * @timeout: waiting time counter (us). |
| */ |
| static s32 pch_i2c_wait_for_bus_idle(struct i2c_algo_pch_data *adap, |
| s32 timeout) |
| { |
| void __iomem *p = adap->pch_base_address; |
| ktime_t ns_val; |
| |
| if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) == 0) |
| return 0; |
| |
| /* MAX timeout value is timeout*1000*1000nsec */ |
| ns_val = ktime_add_ns(ktime_get(), timeout*1000*1000); |
| do { |
| msleep(20); |
| if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) == 0) |
| return 0; |
| } while (ktime_lt(ktime_get(), ns_val)); |
| |
| pch_dbg(adap, "I2CSR = %x\n", ioread32(p + PCH_I2CSR)); |
| pch_err(adap, "%s: Timeout Error.return%d\n", __func__, -ETIME); |
| pch_i2c_init(adap); |
| |
| return -ETIME; |
| } |
| |
| /** |
| * pch_i2c_start() - Generate I2C start condition in normal mode. |
| * @adap: Pointer to struct i2c_algo_pch_data. |
| * |
| * Generate I2C start condition in normal mode by setting I2CCTL.I2CMSTA to 1. |
| */ |
| static void pch_i2c_start(struct i2c_algo_pch_data *adap) |
| { |
| void __iomem *p = adap->pch_base_address; |
| pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL)); |
| pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_START); |
| } |
| |
| /** |
| * pch_i2c_wait_for_xfer_complete() - initiates a wait for the tx complete event |
| * @adap: Pointer to struct i2c_algo_pch_data. |
| */ |
| static s32 pch_i2c_wait_for_xfer_complete(struct i2c_algo_pch_data *adap) |
| { |
| long ret; |
| ret = wait_event_timeout(pch_event, |
| (adap->pch_event_flag != 0), msecs_to_jiffies(50)); |
| |
| if (ret == 0) { |
| pch_err(adap, "timeout: %x\n", adap->pch_event_flag); |
| adap->pch_event_flag = 0; |
| return -ETIMEDOUT; |
| } |
| |
| if (adap->pch_event_flag & I2C_ERROR_MASK) { |
| pch_err(adap, "error bits set: %x\n", adap->pch_event_flag); |
| adap->pch_event_flag = 0; |
| return -EIO; |
| } |
| |
| adap->pch_event_flag = 0; |
| |
| return 0; |
| } |
| |
| /** |
| * pch_i2c_getack() - to confirm ACK/NACK |
| * @adap: Pointer to struct i2c_algo_pch_data. |
| */ |
| static s32 pch_i2c_getack(struct i2c_algo_pch_data *adap) |
| { |
| u32 reg_val; |
| void __iomem *p = adap->pch_base_address; |
| reg_val = ioread32(p + PCH_I2CSR) & PCH_GETACK; |
| |
| if (reg_val != 0) { |
| pch_err(adap, "return%d\n", -EPROTO); |
| return -EPROTO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * pch_i2c_stop() - generate stop condition in normal mode. |
| * @adap: Pointer to struct i2c_algo_pch_data. |
| */ |
| static void pch_i2c_stop(struct i2c_algo_pch_data *adap) |
| { |
| void __iomem *p = adap->pch_base_address; |
| pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL)); |
| /* clear the start bit */ |
| pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_START); |
| } |
| |
| /** |
| * pch_i2c_repstart() - generate repeated start condition in normal mode |
| * @adap: Pointer to struct i2c_algo_pch_data. |
| */ |
| static void pch_i2c_repstart(struct i2c_algo_pch_data *adap) |
| { |
| void __iomem *p = adap->pch_base_address; |
| pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL)); |
| pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_REPSTART); |
| } |
| |
| /** |
| * pch_i2c_writebytes() - write data to I2C bus in normal mode |
| * @i2c_adap: Pointer to the struct i2c_adapter. |
| * @last: specifies whether last message or not. |
| * In the case of compound mode it will be 1 for last message, |
| * otherwise 0. |
| * @first: specifies whether first message or not. |
| * 1 for first message otherwise 0. |
| */ |
| static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap, |
| struct i2c_msg *msgs, u32 last, u32 first) |
| { |
| struct i2c_algo_pch_data *adap = i2c_adap->algo_data; |
| u8 *buf; |
| u32 length; |
| u32 addr; |
| u32 addr_2_msb; |
| u32 addr_8_lsb; |
| s32 wrcount; |
| s32 rtn; |
| void __iomem *p = adap->pch_base_address; |
| |
| length = msgs->len; |
| buf = msgs->buf; |
| addr = msgs->addr; |
| |
| /* enable master tx */ |
| pch_setbit(adap->pch_base_address, PCH_I2CCTL, I2C_TX_MODE); |
| |
| pch_dbg(adap, "I2CCTL = %x msgs->len = %d\n", ioread32(p + PCH_I2CCTL), |
| length); |
| |
| if (first) { |
| if (pch_i2c_wait_for_bus_idle(adap, BUS_IDLE_TIMEOUT) == -ETIME) |
| return -ETIME; |
| } |
| |
| if (msgs->flags & I2C_M_TEN) { |
| addr_2_msb = ((addr & I2C_MSB_2B_MSK) >> 7) & 0x06; |
| iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR); |
| if (first) |
| pch_i2c_start(adap); |
| |
| rtn = pch_i2c_wait_for_xfer_complete(adap); |
| if (rtn == 0) { |
| if (pch_i2c_getack(adap)) { |
| pch_dbg(adap, "Receive NACK for slave address" |
| "setting\n"); |
| return -EIO; |
| } |
| addr_8_lsb = (addr & I2C_ADDR_MSK); |
| iowrite32(addr_8_lsb, p + PCH_I2CDR); |
| } else if (rtn == -EIO) { /* Arbitration Lost */ |
| pch_err(adap, "Lost Arbitration\n"); |
| pch_clrbit(adap->pch_base_address, PCH_I2CSR, |
| I2CMAL_BIT); |
| pch_clrbit(adap->pch_base_address, PCH_I2CSR, |
| I2CMIF_BIT); |
| pch_i2c_init(adap); |
| return -EAGAIN; |
| } else { /* wait-event timeout */ |
| pch_i2c_stop(adap); |
| return -ETIME; |
| } |
| } else { |
| /* set 7 bit slave address and R/W bit as 0 */ |
| iowrite32(addr << 1, p + PCH_I2CDR); |
| if (first) |
| pch_i2c_start(adap); |
| } |
| |
| rtn = pch_i2c_wait_for_xfer_complete(adap); |
| if (rtn == 0) { |
| if (pch_i2c_getack(adap)) { |
| pch_dbg(adap, "Receive NACK for slave address" |
| "setting\n"); |
| return -EIO; |
| } |
| } else if (rtn == -EIO) { /* Arbitration Lost */ |
| pch_err(adap, "Lost Arbitration\n"); |
| pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT); |
| pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT); |
| pch_i2c_init(adap); |
| return -EAGAIN; |
| } else { /* wait-event timeout */ |
| pch_i2c_stop(adap); |
| return -ETIME; |
| } |
| |
| for (wrcount = 0; wrcount < length; ++wrcount) { |
| /* write buffer value to I2C data register */ |
| iowrite32(buf[wrcount], p + PCH_I2CDR); |
| pch_dbg(adap, "writing %x to Data register\n", buf[wrcount]); |
| |
| rtn = pch_i2c_wait_for_xfer_complete(adap); |
| if (rtn == 0) { |
| if (pch_i2c_getack(adap)) { |
| pch_dbg(adap, "Receive NACK for slave address" |
| "setting\n"); |
| return -EIO; |
| } |
| pch_clrbit(adap->pch_base_address, PCH_I2CSR, |
| I2CMCF_BIT); |
| pch_clrbit(adap->pch_base_address, PCH_I2CSR, |
| I2CMIF_BIT); |
| } else { /* wait-event timeout */ |
| pch_i2c_stop(adap); |
| return -ETIME; |
| } |
| } |
| |
| /* check if this is the last message */ |
| if (last) |
| pch_i2c_stop(adap); |
| else |
| pch_i2c_repstart(adap); |
| |
| pch_dbg(adap, "return=%d\n", wrcount); |
| |
| return wrcount; |
| } |
| |
| /** |
| * pch_i2c_sendack() - send ACK |
| * @adap: Pointer to struct i2c_algo_pch_data. |
| */ |
| static void pch_i2c_sendack(struct i2c_algo_pch_data *adap) |
| { |
| void __iomem *p = adap->pch_base_address; |
| pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL)); |
| pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_ACK); |
| } |
| |
| /** |
| * pch_i2c_sendnack() - send NACK |
| * @adap: Pointer to struct i2c_algo_pch_data. |
| */ |
| static void pch_i2c_sendnack(struct i2c_algo_pch_data *adap) |
| { |
| void __iomem *p = adap->pch_base_address; |
| pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL)); |
| pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_ACK); |
| } |
| |
| /** |
| * pch_i2c_restart() - Generate I2C restart condition in normal mode. |
| * @adap: Pointer to struct i2c_algo_pch_data. |
| * |
| * Generate I2C restart condition in normal mode by setting I2CCTL.I2CRSTA. |
| */ |
| static void pch_i2c_restart(struct i2c_algo_pch_data *adap) |
| { |
| void __iomem *p = adap->pch_base_address; |
| pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL)); |
| pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_RESTART); |
| } |
| |
| /** |
| * pch_i2c_readbytes() - read data from I2C bus in normal mode. |
| * @i2c_adap: Pointer to the struct i2c_adapter. |
| * @msgs: Pointer to i2c_msg structure. |
| * @last: specifies whether last message or not. |
| * @first: specifies whether first message or not. |
| */ |
| static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, |
| u32 last, u32 first) |
| { |
| struct i2c_algo_pch_data *adap = i2c_adap->algo_data; |
| |
| u8 *buf; |
| u32 count; |
| u32 length; |
| u32 addr; |
| u32 addr_2_msb; |
| u32 addr_8_lsb; |
| void __iomem *p = adap->pch_base_address; |
| s32 rtn; |
| |
| length = msgs->len; |
| buf = msgs->buf; |
| addr = msgs->addr; |
| |
| /* enable master reception */ |
| pch_clrbit(adap->pch_base_address, PCH_I2CCTL, I2C_TX_MODE); |
| |
| if (first) { |
| if (pch_i2c_wait_for_bus_idle(adap, BUS_IDLE_TIMEOUT) == -ETIME) |
| return -ETIME; |
| } |
| |
| if (msgs->flags & I2C_M_TEN) { |
| addr_2_msb = ((addr & I2C_MSB_2B_MSK) >> 7); |
| iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR); |
| if (first) |
| pch_i2c_start(adap); |
| |
| rtn = pch_i2c_wait_for_xfer_complete(adap); |
| if (rtn == 0) { |
| if (pch_i2c_getack(adap)) { |
| pch_dbg(adap, "Receive NACK for slave address" |
| "setting\n"); |
| return -EIO; |
| } |
| addr_8_lsb = (addr & I2C_ADDR_MSK); |
| iowrite32(addr_8_lsb, p + PCH_I2CDR); |
| } else if (rtn == -EIO) { /* Arbitration Lost */ |
| pch_err(adap, "Lost Arbitration\n"); |
| pch_clrbit(adap->pch_base_address, PCH_I2CSR, |
| I2CMAL_BIT); |
| pch_clrbit(adap->pch_base_address, PCH_I2CSR, |
| I2CMIF_BIT); |
| pch_i2c_init(adap); |
| return -EAGAIN; |
| } else { /* wait-event timeout */ |
| pch_i2c_stop(adap); |
| return -ETIME; |
| } |
| pch_i2c_restart(adap); |
| rtn = pch_i2c_wait_for_xfer_complete(adap); |
| if (rtn == 0) { |
| if (pch_i2c_getack(adap)) { |
| pch_dbg(adap, "Receive NACK for slave address" |
| "setting\n"); |
| return -EIO; |
| } |
| addr_2_msb |= I2C_RD; |
| iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, |
| p + PCH_I2CDR); |
| } else if (rtn == -EIO) { /* Arbitration Lost */ |
| pch_err(adap, "Lost Arbitration\n"); |
| pch_clrbit(adap->pch_base_address, PCH_I2CSR, |
| I2CMAL_BIT); |
| pch_clrbit(adap->pch_base_address, PCH_I2CSR, |
| I2CMIF_BIT); |
| pch_i2c_init(adap); |
| return -EAGAIN; |
| } else { /* wait-event timeout */ |
| pch_i2c_stop(adap); |
| return -ETIME; |
| } |
| } else { |
| /* 7 address bits + R/W bit */ |
| addr = (((addr) << 1) | (I2C_RD)); |
| iowrite32(addr, p + PCH_I2CDR); |
| } |
| |
| /* check if it is the first message */ |
| if (first) |
| pch_i2c_start(adap); |
| |
| rtn = pch_i2c_wait_for_xfer_complete(adap); |
| if (rtn == 0) { |
| if (pch_i2c_getack(adap)) { |
| pch_dbg(adap, "Receive NACK for slave address" |
| "setting\n"); |
| return -EIO; |
| } |
| } else if (rtn == -EIO) { /* Arbitration Lost */ |
| pch_err(adap, "Lost Arbitration\n"); |
| pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT); |
| pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT); |
| pch_i2c_init(adap); |
| return -EAGAIN; |
| } else { /* wait-event timeout */ |
| pch_i2c_stop(adap); |
| return -ETIME; |
| } |
| |
| if (length == 0) { |
| pch_i2c_stop(adap); |
| ioread32(p + PCH_I2CDR); /* Dummy read needs */ |
| |
| count = length; |
| } else { |
| int read_index; |
| int loop; |
| pch_i2c_sendack(adap); |
| |
| /* Dummy read */ |
| for (loop = 1, read_index = 0; loop < length; loop++) { |
| buf[read_index] = ioread32(p + PCH_I2CDR); |
| |
| if (loop != 1) |
| read_index++; |
| |
| rtn = pch_i2c_wait_for_xfer_complete(adap); |
| if (rtn == 0) { |
| if (pch_i2c_getack(adap)) { |
| pch_dbg(adap, "Receive NACK for slave" |
| "address setting\n"); |
| return -EIO; |
| } |
| } else { /* wait-event timeout */ |
| pch_i2c_stop(adap); |
| return -ETIME; |
| } |
| |
| } /* end for */ |
| |
| pch_i2c_sendnack(adap); |
| |
| buf[read_index] = ioread32(p + PCH_I2CDR); /* Read final - 1 */ |
| |
| if (length != 1) |
| read_index++; |
| |
| rtn = pch_i2c_wait_for_xfer_complete(adap); |
| if (rtn == 0) { |
| if (pch_i2c_getack(adap)) { |
| pch_dbg(adap, "Receive NACK for slave" |
| "address setting\n"); |
| return -EIO; |
| } |
| } else { /* wait-event timeout */ |
| pch_i2c_stop(adap); |
| return -ETIME; |
| } |
| |
| if (last) |
| pch_i2c_stop(adap); |
| else |
| pch_i2c_repstart(adap); |
| |
| buf[read_index++] = ioread32(p + PCH_I2CDR); /* Read Final */ |
| count = read_index; |
| } |
| |
| return count; |
| } |
| |
| /** |
| * pch_i2c_cb() - Interrupt handler Call back function |
| * @adap: Pointer to struct i2c_algo_pch_data. |
| */ |
| static void pch_i2c_cb(struct i2c_algo_pch_data *adap) |
| { |
| u32 sts; |
| void __iomem *p = adap->pch_base_address; |
| |
| sts = ioread32(p + PCH_I2CSR); |
| sts &= (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT); |
| if (sts & I2CMAL_BIT) |
| adap->pch_event_flag |= I2CMAL_EVENT; |
| |
| if (sts & I2CMCF_BIT) |
| adap->pch_event_flag |= I2CMCF_EVENT; |
| |
| /* clear the applicable bits */ |
| pch_clrbit(adap->pch_base_address, PCH_I2CSR, sts); |
| |
| pch_dbg(adap, "PCH_I2CSR = %x\n", ioread32(p + PCH_I2CSR)); |
| |
| wake_up(&pch_event); |
| } |
| |
| /** |
| * pch_i2c_handler() - interrupt handler for the PCH I2C controller |
| * @irq: irq number. |
| * @pData: cookie passed back to the handler function. |
| */ |
| static irqreturn_t pch_i2c_handler(int irq, void *pData) |
| { |
| u32 reg_val; |
| int flag; |
| int i; |
| struct adapter_info *adap_info = pData; |
| void __iomem *p; |
| u32 mode; |
| |
| for (i = 0, flag = 0; i < adap_info->ch_num; i++) { |
| p = adap_info->pch_data[i].pch_base_address; |
| mode = ioread32(p + PCH_I2CMOD); |
| mode &= BUFFER_MODE | EEPROM_SR_MODE; |
| if (mode != NORMAL_MODE) { |
| pch_err(adap_info->pch_data, |
| "I2C-%d mode(%d) is not supported\n", mode, i); |
| continue; |
| } |
| reg_val = ioread32(p + PCH_I2CSR); |
| if (reg_val & (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT)) { |
| pch_i2c_cb(&adap_info->pch_data[i]); |
| flag = 1; |
| } |
| } |
| |
| return flag ? IRQ_HANDLED : IRQ_NONE; |
| } |
| |
| /** |
| * pch_i2c_xfer() - Reading adnd writing data through I2C bus |
| * @i2c_adap: Pointer to the struct i2c_adapter. |
| * @msgs: Pointer to i2c_msg structure. |
| * @num: number of messages. |
| */ |
| static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap, |
| struct i2c_msg *msgs, s32 num) |
| { |
| struct i2c_msg *pmsg; |
| u32 i = 0; |
| u32 status; |
| u32 msglen; |
| u32 subaddrlen; |
| s32 ret; |
| |
| struct i2c_algo_pch_data *adap = i2c_adap->algo_data; |
| |
| ret = mutex_lock_interruptible(&pch_mutex); |
| if (ret) |
| return -ERESTARTSYS; |
| |
| if (adap->p_adapter_info->pch_i2c_suspended) { |
| mutex_unlock(&pch_mutex); |
| return -EBUSY; |
| } |
| |
| pch_dbg(adap, "adap->p_adapter_info->pch_i2c_suspended is %d\n", |
| adap->p_adapter_info->pch_i2c_suspended); |
| /* transfer not completed */ |
| adap->pch_i2c_xfer_in_progress = true; |
| |
| for (i = 0; i < num && ret >= 0; i++) { |
| pmsg = &msgs[i]; |
| pmsg->flags |= adap->pch_buff_mode_en; |
| status = pmsg->flags; |
| pch_dbg(adap, |
| "After invoking I2C_MODE_SEL :flag= 0x%x\n", status); |
| /* calculate sub address length and message length */ |
| /* these are applicable only for buffer mode */ |
| subaddrlen = pmsg->buf[0]; |
| /* calculate actual message length excluding |
| * the sub address fields */ |
| msglen = (pmsg->len) - (subaddrlen + 1); |
| |
| if ((status & (I2C_M_RD)) != false) { |
| ret = pch_i2c_readbytes(i2c_adap, pmsg, (i + 1 == num), |
| (i == 0)); |
| } else { |
| ret = pch_i2c_writebytes(i2c_adap, pmsg, (i + 1 == num), |
| (i == 0)); |
| } |
| } |
| |
| adap->pch_i2c_xfer_in_progress = false; /* transfer completed */ |
| |
| mutex_unlock(&pch_mutex); |
| |
| return (ret < 0) ? ret : num; |
| } |
| |
| /** |
| * pch_i2c_func() - return the functionality of the I2C driver |
| * @adap: Pointer to struct i2c_algo_pch_data. |
| */ |
| static u32 pch_i2c_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR; |
| } |
| |
| static struct i2c_algorithm pch_algorithm = { |
| .master_xfer = pch_i2c_xfer, |
| .functionality = pch_i2c_func |
| }; |
| |
| /** |
| * pch_i2c_disbl_int() - Disable PCH I2C interrupts |
| * @adap: Pointer to struct i2c_algo_pch_data. |
| */ |
| static void pch_i2c_disbl_int(struct i2c_algo_pch_data *adap) |
| { |
| void __iomem *p = adap->pch_base_address; |
| |
| pch_clrbit(adap->pch_base_address, PCH_I2CCTL, NORMAL_INTR_ENBL); |
| |
| iowrite32(EEPROM_RST_INTR_DISBL, p + PCH_I2CESRMSK); |
| |
| iowrite32(BUFFER_MODE_INTR_DISBL, p + PCH_I2CBUFMSK); |
| } |
| |
| static int __devinit pch_i2c_probe(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| void __iomem *base_addr; |
| int ret; |
| int i, j; |
| struct adapter_info *adap_info; |
| struct i2c_adapter *pch_adap; |
| |
| pch_pci_dbg(pdev, "Entered.\n"); |
| |
| adap_info = kzalloc((sizeof(struct adapter_info)), GFP_KERNEL); |
| if (adap_info == NULL) { |
| pch_pci_err(pdev, "Memory allocation FAILED\n"); |
| return -ENOMEM; |
| } |
| |
| ret = pci_enable_device(pdev); |
| if (ret) { |
| pch_pci_err(pdev, "pci_enable_device FAILED\n"); |
| goto err_pci_enable; |
| } |
| |
| ret = pci_request_regions(pdev, KBUILD_MODNAME); |
| if (ret) { |
| pch_pci_err(pdev, "pci_request_regions FAILED\n"); |
| goto err_pci_req; |
| } |
| |
| base_addr = pci_iomap(pdev, 1, 0); |
| |
| if (base_addr == NULL) { |
| pch_pci_err(pdev, "pci_iomap FAILED\n"); |
| ret = -ENOMEM; |
| goto err_pci_iomap; |
| } |
| |
| /* Set the number of I2C channel instance */ |
| adap_info->ch_num = id->driver_data; |
| |
| for (i = 0; i < adap_info->ch_num; i++) { |
| pch_adap = &adap_info->pch_data[i].pch_adapter; |
| adap_info->pch_i2c_suspended = false; |
| |
| adap_info->pch_data[i].p_adapter_info = adap_info; |
| |
| pch_adap->owner = THIS_MODULE; |
| pch_adap->class = I2C_CLASS_HWMON; |
| strcpy(pch_adap->name, KBUILD_MODNAME); |
| pch_adap->algo = &pch_algorithm; |
| pch_adap->algo_data = &adap_info->pch_data[i]; |
| |
| /* base_addr + offset; */ |
| adap_info->pch_data[i].pch_base_address = base_addr + 0x100 * i; |
| |
| pch_adap->dev.parent = &pdev->dev; |
| |
| ret = i2c_add_adapter(pch_adap); |
| if (ret) { |
| pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i); |
| goto err_i2c_add_adapter; |
| } |
| |
| pch_i2c_init(&adap_info->pch_data[i]); |
| } |
| ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED, |
| KBUILD_MODNAME, adap_info); |
| if (ret) { |
| pch_pci_err(pdev, "request_irq FAILED\n"); |
| goto err_i2c_add_adapter; |
| } |
| |
| pci_set_drvdata(pdev, adap_info); |
| pch_pci_dbg(pdev, "returns %d.\n", ret); |
| return 0; |
| |
| err_i2c_add_adapter: |
| for (j = 0; j < i; j++) |
| i2c_del_adapter(&adap_info->pch_data[j].pch_adapter); |
| pci_iounmap(pdev, base_addr); |
| err_pci_iomap: |
| pci_release_regions(pdev); |
| err_pci_req: |
| pci_disable_device(pdev); |
| err_pci_enable: |
| kfree(adap_info); |
| return ret; |
| } |
| |
| static void __devexit pch_i2c_remove(struct pci_dev *pdev) |
| { |
| int i; |
| struct adapter_info *adap_info = pci_get_drvdata(pdev); |
| |
| free_irq(pdev->irq, adap_info); |
| |
| for (i = 0; i < adap_info->ch_num; i++) { |
| pch_i2c_disbl_int(&adap_info->pch_data[i]); |
| i2c_del_adapter(&adap_info->pch_data[i].pch_adapter); |
| } |
| |
| if (adap_info->pch_data[0].pch_base_address) |
| pci_iounmap(pdev, adap_info->pch_data[0].pch_base_address); |
| |
| for (i = 0; i < adap_info->ch_num; i++) |
| adap_info->pch_data[i].pch_base_address = 0; |
| |
| pci_set_drvdata(pdev, NULL); |
| |
| pci_release_regions(pdev); |
| |
| pci_disable_device(pdev); |
| kfree(adap_info); |
| } |
| |
| #ifdef CONFIG_PM |
| static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| int ret; |
| int i; |
| struct adapter_info *adap_info = pci_get_drvdata(pdev); |
| void __iomem *p = adap_info->pch_data[0].pch_base_address; |
| |
| adap_info->pch_i2c_suspended = true; |
| |
| for (i = 0; i < adap_info->ch_num; i++) { |
| while ((adap_info->pch_data[i].pch_i2c_xfer_in_progress)) { |
| /* Wait until all channel transfers are completed */ |
| msleep(20); |
| } |
| } |
| |
| /* Disable the i2c interrupts */ |
| for (i = 0; i < adap_info->ch_num; i++) |
| pch_i2c_disbl_int(&adap_info->pch_data[i]); |
| |
| pch_pci_dbg(pdev, "I2CSR = %x I2CBUFSTA = %x I2CESRSTA = %x " |
| "invoked function pch_i2c_disbl_int successfully\n", |
| ioread32(p + PCH_I2CSR), ioread32(p + PCH_I2CBUFSTA), |
| ioread32(p + PCH_I2CESRSTA)); |
| |
| ret = pci_save_state(pdev); |
| |
| if (ret) { |
| pch_pci_err(pdev, "pci_save_state\n"); |
| return ret; |
| } |
| |
| pci_enable_wake(pdev, PCI_D3hot, 0); |
| pci_disable_device(pdev); |
| pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
| |
| return 0; |
| } |
| |
| static int pch_i2c_resume(struct pci_dev *pdev) |
| { |
| int i; |
| struct adapter_info *adap_info = pci_get_drvdata(pdev); |
| |
| pci_set_power_state(pdev, PCI_D0); |
| pci_restore_state(pdev); |
| |
| if (pci_enable_device(pdev) < 0) { |
| pch_pci_err(pdev, "pch_i2c_resume:pci_enable_device FAILED\n"); |
| return -EIO; |
| } |
| |
| pci_enable_wake(pdev, PCI_D3hot, 0); |
| |
| for (i = 0; i < adap_info->ch_num; i++) |
| pch_i2c_init(&adap_info->pch_data[i]); |
| |
| adap_info->pch_i2c_suspended = false; |
| |
| return 0; |
| } |
| #else |
| #define pch_i2c_suspend NULL |
| #define pch_i2c_resume NULL |
| #endif |
| |
| static struct pci_driver pch_pcidriver = { |
| .name = KBUILD_MODNAME, |
| .id_table = pch_pcidev_id, |
| .probe = pch_i2c_probe, |
| .remove = __devexit_p(pch_i2c_remove), |
| .suspend = pch_i2c_suspend, |
| .resume = pch_i2c_resume |
| }; |
| |
| static int __init pch_pci_init(void) |
| { |
| return pci_register_driver(&pch_pcidriver); |
| } |
| module_init(pch_pci_init); |
| |
| static void __exit pch_pci_exit(void) |
| { |
| pci_unregister_driver(&pch_pcidriver); |
| } |
| module_exit(pch_pci_exit); |
| |
| MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH I2C Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Tomoya MORINAGA. <tomoya-linux@dsn.okisemi.com>"); |
| module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR)); |
| module_param(pch_clk, int, (S_IRUSR | S_IWUSR)); |