| /* |
| * ADS1015 - Texas Instruments Analog-to-Digital Converter |
| * |
| * Copyright (c) 2016, Intel Corporation. |
| * |
| * This file is subject to the terms and conditions of version 2 of |
| * the GNU General Public License. See the file COPYING in the main |
| * directory of this archive for more details. |
| * |
| * IIO driver for ADS1015 ADC 7-bit I2C slave address: |
| * * 0x48 - ADDR connected to Ground |
| * * 0x49 - ADDR connected to Vdd |
| * * 0x4A - ADDR connected to SDA |
| * * 0x4B - ADDR connected to SCL |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/i2c.h> |
| #include <linux/regmap.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/mutex.h> |
| #include <linux/delay.h> |
| |
| #include <linux/i2c/ads1015.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/types.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/triggered_buffer.h> |
| #include <linux/iio/trigger_consumer.h> |
| |
| #define ADS1015_DRV_NAME "ads1015" |
| |
| #define ADS1015_CONV_REG 0x00 |
| #define ADS1015_CFG_REG 0x01 |
| |
| #define ADS1015_CFG_DR_SHIFT 5 |
| #define ADS1015_CFG_MOD_SHIFT 8 |
| #define ADS1015_CFG_PGA_SHIFT 9 |
| #define ADS1015_CFG_MUX_SHIFT 12 |
| |
| #define ADS1015_CFG_DR_MASK GENMASK(7, 5) |
| #define ADS1015_CFG_MOD_MASK BIT(8) |
| #define ADS1015_CFG_PGA_MASK GENMASK(11, 9) |
| #define ADS1015_CFG_MUX_MASK GENMASK(14, 12) |
| |
| /* device operating modes */ |
| #define ADS1015_CONTINUOUS 0 |
| #define ADS1015_SINGLESHOT 1 |
| |
| #define ADS1015_SLEEP_DELAY_MS 2000 |
| #define ADS1015_DEFAULT_PGA 2 |
| #define ADS1015_DEFAULT_DATA_RATE 4 |
| #define ADS1015_DEFAULT_CHAN 0 |
| |
| enum { |
| ADS1015, |
| ADS1115, |
| }; |
| |
| enum ads1015_channels { |
| ADS1015_AIN0_AIN1 = 0, |
| ADS1015_AIN0_AIN3, |
| ADS1015_AIN1_AIN3, |
| ADS1015_AIN2_AIN3, |
| ADS1015_AIN0, |
| ADS1015_AIN1, |
| ADS1015_AIN2, |
| ADS1015_AIN3, |
| ADS1015_TIMESTAMP, |
| }; |
| |
| static const unsigned int ads1015_data_rate[] = { |
| 128, 250, 490, 920, 1600, 2400, 3300, 3300 |
| }; |
| |
| static const unsigned int ads1115_data_rate[] = { |
| 8, 16, 32, 64, 128, 250, 475, 860 |
| }; |
| |
| static const struct { |
| int scale; |
| int uscale; |
| } ads1015_scale[] = { |
| {3, 0}, |
| {2, 0}, |
| {1, 0}, |
| {0, 500000}, |
| {0, 250000}, |
| {0, 125000}, |
| {0, 125000}, |
| {0, 125000}, |
| }; |
| |
| #define ADS1015_V_CHAN(_chan, _addr) { \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .address = _addr, \ |
| .channel = _chan, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .scan_index = _addr, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 12, \ |
| .storagebits = 16, \ |
| .shift = 4, \ |
| .endianness = IIO_CPU, \ |
| }, \ |
| .datasheet_name = "AIN"#_chan, \ |
| } |
| |
| #define ADS1015_V_DIFF_CHAN(_chan, _chan2, _addr) { \ |
| .type = IIO_VOLTAGE, \ |
| .differential = 1, \ |
| .indexed = 1, \ |
| .address = _addr, \ |
| .channel = _chan, \ |
| .channel2 = _chan2, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .scan_index = _addr, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 12, \ |
| .storagebits = 16, \ |
| .shift = 4, \ |
| .endianness = IIO_CPU, \ |
| }, \ |
| .datasheet_name = "AIN"#_chan"-AIN"#_chan2, \ |
| } |
| |
| #define ADS1115_V_CHAN(_chan, _addr) { \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .address = _addr, \ |
| .channel = _chan, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .scan_index = _addr, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 16, \ |
| .storagebits = 16, \ |
| .endianness = IIO_CPU, \ |
| }, \ |
| .datasheet_name = "AIN"#_chan, \ |
| } |
| |
| #define ADS1115_V_DIFF_CHAN(_chan, _chan2, _addr) { \ |
| .type = IIO_VOLTAGE, \ |
| .differential = 1, \ |
| .indexed = 1, \ |
| .address = _addr, \ |
| .channel = _chan, \ |
| .channel2 = _chan2, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .scan_index = _addr, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 16, \ |
| .storagebits = 16, \ |
| .endianness = IIO_CPU, \ |
| }, \ |
| .datasheet_name = "AIN"#_chan"-AIN"#_chan2, \ |
| } |
| |
| struct ads1015_data { |
| struct regmap *regmap; |
| /* |
| * Protects ADC ops, e.g: concurrent sysfs/buffered |
| * data reads, configuration updates |
| */ |
| struct mutex lock; |
| struct ads1015_channel_data channel_data[ADS1015_CHANNELS]; |
| |
| unsigned int *data_rate; |
| }; |
| |
| static bool ads1015_is_writeable_reg(struct device *dev, unsigned int reg) |
| { |
| return (reg == ADS1015_CFG_REG); |
| } |
| |
| static const struct regmap_config ads1015_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 16, |
| .max_register = ADS1015_CFG_REG, |
| .writeable_reg = ads1015_is_writeable_reg, |
| }; |
| |
| static const struct iio_chan_spec ads1015_channels[] = { |
| ADS1015_V_DIFF_CHAN(0, 1, ADS1015_AIN0_AIN1), |
| ADS1015_V_DIFF_CHAN(0, 3, ADS1015_AIN0_AIN3), |
| ADS1015_V_DIFF_CHAN(1, 3, ADS1015_AIN1_AIN3), |
| ADS1015_V_DIFF_CHAN(2, 3, ADS1015_AIN2_AIN3), |
| ADS1015_V_CHAN(0, ADS1015_AIN0), |
| ADS1015_V_CHAN(1, ADS1015_AIN1), |
| ADS1015_V_CHAN(2, ADS1015_AIN2), |
| ADS1015_V_CHAN(3, ADS1015_AIN3), |
| IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP), |
| }; |
| |
| static const struct iio_chan_spec ads1115_channels[] = { |
| ADS1115_V_DIFF_CHAN(0, 1, ADS1015_AIN0_AIN1), |
| ADS1115_V_DIFF_CHAN(0, 3, ADS1015_AIN0_AIN3), |
| ADS1115_V_DIFF_CHAN(1, 3, ADS1015_AIN1_AIN3), |
| ADS1115_V_DIFF_CHAN(2, 3, ADS1015_AIN2_AIN3), |
| ADS1115_V_CHAN(0, ADS1015_AIN0), |
| ADS1115_V_CHAN(1, ADS1015_AIN1), |
| ADS1115_V_CHAN(2, ADS1015_AIN2), |
| ADS1115_V_CHAN(3, ADS1015_AIN3), |
| IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP), |
| }; |
| |
| static int ads1015_set_power_state(struct ads1015_data *data, bool on) |
| { |
| int ret; |
| struct device *dev = regmap_get_device(data->regmap); |
| |
| if (on) { |
| ret = pm_runtime_get_sync(dev); |
| if (ret < 0) |
| pm_runtime_put_noidle(dev); |
| } else { |
| pm_runtime_mark_last_busy(dev); |
| ret = pm_runtime_put_autosuspend(dev); |
| } |
| |
| return ret; |
| } |
| |
| static |
| int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val) |
| { |
| int ret, pga, dr, conv_time; |
| bool change; |
| |
| if (chan < 0 || chan >= ADS1015_CHANNELS) |
| return -EINVAL; |
| |
| pga = data->channel_data[chan].pga; |
| dr = data->channel_data[chan].data_rate; |
| |
| ret = regmap_update_bits_check(data->regmap, ADS1015_CFG_REG, |
| ADS1015_CFG_MUX_MASK | |
| ADS1015_CFG_PGA_MASK, |
| chan << ADS1015_CFG_MUX_SHIFT | |
| pga << ADS1015_CFG_PGA_SHIFT, |
| &change); |
| if (ret < 0) |
| return ret; |
| |
| if (change) { |
| conv_time = DIV_ROUND_UP(USEC_PER_SEC, data->data_rate[dr]); |
| usleep_range(conv_time, conv_time + 1); |
| } |
| |
| return regmap_read(data->regmap, ADS1015_CONV_REG, val); |
| } |
| |
| static irqreturn_t ads1015_trigger_handler(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct ads1015_data *data = iio_priv(indio_dev); |
| s16 buf[8]; /* 1x s16 ADC val + 3x s16 padding + 4x s16 timestamp */ |
| int chan, ret, res; |
| |
| memset(buf, 0, sizeof(buf)); |
| |
| mutex_lock(&data->lock); |
| chan = find_first_bit(indio_dev->active_scan_mask, |
| indio_dev->masklength); |
| ret = ads1015_get_adc_result(data, chan, &res); |
| if (ret < 0) { |
| mutex_unlock(&data->lock); |
| goto err; |
| } |
| |
| buf[0] = res; |
| mutex_unlock(&data->lock); |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns()); |
| |
| err: |
| iio_trigger_notify_done(indio_dev->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int ads1015_set_scale(struct ads1015_data *data, int chan, |
| int scale, int uscale) |
| { |
| int i, ret, rindex = -1; |
| |
| for (i = 0; i < ARRAY_SIZE(ads1015_scale); i++) |
| if (ads1015_scale[i].scale == scale && |
| ads1015_scale[i].uscale == uscale) { |
| rindex = i; |
| break; |
| } |
| if (rindex < 0) |
| return -EINVAL; |
| |
| ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG, |
| ADS1015_CFG_PGA_MASK, |
| rindex << ADS1015_CFG_PGA_SHIFT); |
| if (ret < 0) |
| return ret; |
| |
| data->channel_data[chan].pga = rindex; |
| |
| return 0; |
| } |
| |
| static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate) |
| { |
| int i, ret, rindex = -1; |
| |
| for (i = 0; i < ARRAY_SIZE(ads1015_data_rate); i++) |
| if (data->data_rate[i] == rate) { |
| rindex = i; |
| break; |
| } |
| if (rindex < 0) |
| return -EINVAL; |
| |
| ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG, |
| ADS1015_CFG_DR_MASK, |
| rindex << ADS1015_CFG_DR_SHIFT); |
| if (ret < 0) |
| return ret; |
| |
| data->channel_data[chan].data_rate = rindex; |
| |
| return 0; |
| } |
| |
| static int ads1015_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val, |
| int *val2, long mask) |
| { |
| int ret, idx; |
| struct ads1015_data *data = iio_priv(indio_dev); |
| |
| mutex_lock(&indio_dev->mlock); |
| mutex_lock(&data->lock); |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: { |
| int shift = chan->scan_type.shift; |
| |
| if (iio_buffer_enabled(indio_dev)) { |
| ret = -EBUSY; |
| break; |
| } |
| |
| ret = ads1015_set_power_state(data, true); |
| if (ret < 0) |
| break; |
| |
| ret = ads1015_get_adc_result(data, chan->address, val); |
| if (ret < 0) { |
| ads1015_set_power_state(data, false); |
| break; |
| } |
| |
| *val = sign_extend32(*val >> shift, 15 - shift); |
| |
| ret = ads1015_set_power_state(data, false); |
| if (ret < 0) |
| break; |
| |
| ret = IIO_VAL_INT; |
| break; |
| } |
| case IIO_CHAN_INFO_SCALE: |
| idx = data->channel_data[chan->address].pga; |
| *val = ads1015_scale[idx].scale; |
| *val2 = ads1015_scale[idx].uscale; |
| ret = IIO_VAL_INT_PLUS_MICRO; |
| break; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| idx = data->channel_data[chan->address].data_rate; |
| *val = data->data_rate[idx]; |
| ret = IIO_VAL_INT; |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| mutex_unlock(&data->lock); |
| mutex_unlock(&indio_dev->mlock); |
| |
| return ret; |
| } |
| |
| static int ads1015_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int val, |
| int val2, long mask) |
| { |
| struct ads1015_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| mutex_lock(&data->lock); |
| switch (mask) { |
| case IIO_CHAN_INFO_SCALE: |
| ret = ads1015_set_scale(data, chan->address, val, val2); |
| break; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| ret = ads1015_set_data_rate(data, chan->address, val); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| mutex_unlock(&data->lock); |
| |
| return ret; |
| } |
| |
| static int ads1015_buffer_preenable(struct iio_dev *indio_dev) |
| { |
| return ads1015_set_power_state(iio_priv(indio_dev), true); |
| } |
| |
| static int ads1015_buffer_postdisable(struct iio_dev *indio_dev) |
| { |
| return ads1015_set_power_state(iio_priv(indio_dev), false); |
| } |
| |
| static const struct iio_buffer_setup_ops ads1015_buffer_setup_ops = { |
| .preenable = ads1015_buffer_preenable, |
| .postenable = iio_triggered_buffer_postenable, |
| .predisable = iio_triggered_buffer_predisable, |
| .postdisable = ads1015_buffer_postdisable, |
| .validate_scan_mask = &iio_validate_scan_mask_onehot, |
| }; |
| |
| static IIO_CONST_ATTR(scale_available, "3 2 1 0.5 0.25 0.125"); |
| |
| static IIO_CONST_ATTR_NAMED(ads1015_sampling_frequency_available, |
| sampling_frequency_available, "128 250 490 920 1600 2400 3300"); |
| static IIO_CONST_ATTR_NAMED(ads1115_sampling_frequency_available, |
| sampling_frequency_available, "8 16 32 64 128 250 475 860"); |
| |
| static struct attribute *ads1015_attributes[] = { |
| &iio_const_attr_scale_available.dev_attr.attr, |
| &iio_const_attr_ads1015_sampling_frequency_available.dev_attr.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group ads1015_attribute_group = { |
| .attrs = ads1015_attributes, |
| }; |
| |
| static struct attribute *ads1115_attributes[] = { |
| &iio_const_attr_scale_available.dev_attr.attr, |
| &iio_const_attr_ads1115_sampling_frequency_available.dev_attr.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group ads1115_attribute_group = { |
| .attrs = ads1115_attributes, |
| }; |
| |
| static struct iio_info ads1015_info = { |
| .driver_module = THIS_MODULE, |
| .read_raw = ads1015_read_raw, |
| .write_raw = ads1015_write_raw, |
| .attrs = &ads1015_attribute_group, |
| }; |
| |
| static struct iio_info ads1115_info = { |
| .driver_module = THIS_MODULE, |
| .read_raw = ads1015_read_raw, |
| .write_raw = ads1015_write_raw, |
| .attrs = &ads1115_attribute_group, |
| }; |
| |
| #ifdef CONFIG_OF |
| static int ads1015_get_channels_config_of(struct i2c_client *client) |
| { |
| struct ads1015_data *data = i2c_get_clientdata(client); |
| struct device_node *node; |
| |
| if (!client->dev.of_node || |
| !of_get_next_child(client->dev.of_node, NULL)) |
| return -EINVAL; |
| |
| for_each_child_of_node(client->dev.of_node, node) { |
| u32 pval; |
| unsigned int channel; |
| unsigned int pga = ADS1015_DEFAULT_PGA; |
| unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE; |
| |
| if (of_property_read_u32(node, "reg", &pval)) { |
| dev_err(&client->dev, "invalid reg on %s\n", |
| node->full_name); |
| continue; |
| } |
| |
| channel = pval; |
| if (channel >= ADS1015_CHANNELS) { |
| dev_err(&client->dev, |
| "invalid channel index %d on %s\n", |
| channel, node->full_name); |
| continue; |
| } |
| |
| if (!of_property_read_u32(node, "ti,gain", &pval)) { |
| pga = pval; |
| if (pga > 6) { |
| dev_err(&client->dev, "invalid gain on %s\n", |
| node->full_name); |
| return -EINVAL; |
| } |
| } |
| |
| if (!of_property_read_u32(node, "ti,datarate", &pval)) { |
| data_rate = pval; |
| if (data_rate > 7) { |
| dev_err(&client->dev, |
| "invalid data_rate on %s\n", |
| node->full_name); |
| return -EINVAL; |
| } |
| } |
| |
| data->channel_data[channel].pga = pga; |
| data->channel_data[channel].data_rate = data_rate; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static void ads1015_get_channels_config(struct i2c_client *client) |
| { |
| unsigned int k; |
| |
| struct iio_dev *indio_dev = i2c_get_clientdata(client); |
| struct ads1015_data *data = iio_priv(indio_dev); |
| struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev); |
| |
| /* prefer platform data */ |
| if (pdata) { |
| memcpy(data->channel_data, pdata->channel_data, |
| sizeof(data->channel_data)); |
| return; |
| } |
| |
| #ifdef CONFIG_OF |
| if (!ads1015_get_channels_config_of(client)) |
| return; |
| #endif |
| /* fallback on default configuration */ |
| for (k = 0; k < ADS1015_CHANNELS; ++k) { |
| data->channel_data[k].pga = ADS1015_DEFAULT_PGA; |
| data->channel_data[k].data_rate = ADS1015_DEFAULT_DATA_RATE; |
| } |
| } |
| |
| static int ads1015_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct iio_dev *indio_dev; |
| struct ads1015_data *data; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| i2c_set_clientdata(client, indio_dev); |
| |
| mutex_init(&data->lock); |
| |
| indio_dev->dev.parent = &client->dev; |
| indio_dev->name = ADS1015_DRV_NAME; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| switch (id->driver_data) { |
| case ADS1015: |
| indio_dev->channels = ads1015_channels; |
| indio_dev->num_channels = ARRAY_SIZE(ads1015_channels); |
| indio_dev->info = &ads1015_info; |
| data->data_rate = (unsigned int *) &ads1015_data_rate; |
| break; |
| case ADS1115: |
| indio_dev->channels = ads1115_channels; |
| indio_dev->num_channels = ARRAY_SIZE(ads1115_channels); |
| indio_dev->info = &ads1115_info; |
| data->data_rate = (unsigned int *) &ads1115_data_rate; |
| break; |
| } |
| |
| /* we need to keep this ABI the same as used by hwmon ADS1015 driver */ |
| ads1015_get_channels_config(client); |
| |
| data->regmap = devm_regmap_init_i2c(client, &ads1015_regmap_config); |
| if (IS_ERR(data->regmap)) { |
| dev_err(&client->dev, "Failed to allocate register map\n"); |
| return PTR_ERR(data->regmap); |
| } |
| |
| ret = iio_triggered_buffer_setup(indio_dev, NULL, |
| ads1015_trigger_handler, |
| &ads1015_buffer_setup_ops); |
| if (ret < 0) { |
| dev_err(&client->dev, "iio triggered buffer setup failed\n"); |
| return ret; |
| } |
| ret = pm_runtime_set_active(&client->dev); |
| if (ret) |
| goto err_buffer_cleanup; |
| pm_runtime_set_autosuspend_delay(&client->dev, ADS1015_SLEEP_DELAY_MS); |
| pm_runtime_use_autosuspend(&client->dev); |
| pm_runtime_enable(&client->dev); |
| |
| ret = iio_device_register(indio_dev); |
| if (ret < 0) { |
| dev_err(&client->dev, "Failed to register IIO device\n"); |
| goto err_buffer_cleanup; |
| } |
| |
| return 0; |
| |
| err_buffer_cleanup: |
| iio_triggered_buffer_cleanup(indio_dev); |
| |
| return ret; |
| } |
| |
| static int ads1015_remove(struct i2c_client *client) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(client); |
| struct ads1015_data *data = iio_priv(indio_dev); |
| |
| iio_device_unregister(indio_dev); |
| |
| pm_runtime_disable(&client->dev); |
| pm_runtime_set_suspended(&client->dev); |
| pm_runtime_put_noidle(&client->dev); |
| |
| iio_triggered_buffer_cleanup(indio_dev); |
| |
| /* power down single shot mode */ |
| return regmap_update_bits(data->regmap, ADS1015_CFG_REG, |
| ADS1015_CFG_MOD_MASK, |
| ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT); |
| } |
| |
| #ifdef CONFIG_PM |
| static int ads1015_runtime_suspend(struct device *dev) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct ads1015_data *data = iio_priv(indio_dev); |
| |
| return regmap_update_bits(data->regmap, ADS1015_CFG_REG, |
| ADS1015_CFG_MOD_MASK, |
| ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT); |
| } |
| |
| static int ads1015_runtime_resume(struct device *dev) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct ads1015_data *data = iio_priv(indio_dev); |
| |
| return regmap_update_bits(data->regmap, ADS1015_CFG_REG, |
| ADS1015_CFG_MOD_MASK, |
| ADS1015_CONTINUOUS << ADS1015_CFG_MOD_SHIFT); |
| } |
| #endif |
| |
| static const struct dev_pm_ops ads1015_pm_ops = { |
| SET_RUNTIME_PM_OPS(ads1015_runtime_suspend, |
| ads1015_runtime_resume, NULL) |
| }; |
| |
| static const struct i2c_device_id ads1015_id[] = { |
| {"ads1015", ADS1015}, |
| {"ads1115", ADS1115}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, ads1015_id); |
| |
| static struct i2c_driver ads1015_driver = { |
| .driver = { |
| .name = ADS1015_DRV_NAME, |
| .pm = &ads1015_pm_ops, |
| }, |
| .probe = ads1015_probe, |
| .remove = ads1015_remove, |
| .id_table = ads1015_id, |
| }; |
| |
| module_i2c_driver(ads1015_driver); |
| |
| MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>"); |
| MODULE_DESCRIPTION("Texas Instruments ADS1015 ADC driver"); |
| MODULE_LICENSE("GPL v2"); |