include/drm/drm_mm.h - kernel/msm-4.19 - Gitiles

 /**************************************************************************
  *
  * Copyright 2006-2008 Tungsten Graphics, Inc., Cedar Park, TX. USA.
  * Copyright 2016 Intel Corporation
  * All Rights Reserved.
  *
  * Permission is hereby granted, free of charge, to any person obtaining a
  * copy of this software and associated documentation files (the
  * "Software"), to deal in the Software without restriction, including
  * without limitation the rights to use, copy, modify, merge, publish,
  * distribute, sub license, and/or sell copies of the Software, and to
  * permit persons to whom the Software is furnished to do so, subject to
  * the following conditions:
  *
  * The above copyright notice and this permission notice (including the
  * next paragraph) shall be included in all copies or substantial portions
  * of the Software.
  *
  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
  * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
  * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
  * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
  * USE OR OTHER DEALINGS IN THE SOFTWARE.
  *
  *
  **************************************************************************/
 /*
  * Authors:
  * Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
  */

 #ifndef _DRM_MM_H_
 #define _DRM_MM_H_

 /*
  * Generic range manager structs
  */
 #include <linux/bug.h>
 #include <linux/rbtree.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #ifdef CONFIG_DRM_DEBUG_MM
 #include <linux/stackdepot.h>
 #endif
 #include <drm/drm_print.h>

 #ifdef CONFIG_DRM_DEBUG_MM
 #define DRM_MM_BUG_ON(expr) BUG_ON(expr)
 #else
 #define DRM_MM_BUG_ON(expr) BUILD_BUG_ON_INVALID(expr)
 #endif

 /**
  * enum drm_mm_insert_mode - control search and allocation behaviour
  *
  * The &struct drm_mm range manager supports finding a suitable modes using
  * a number of search trees. These trees are oranised by size, by address and
  * in most recent eviction order. This allows the user to find either the
  * smallest hole to reuse, the lowest or highest address to reuse, or simply
  * reuse the most recent eviction that fits. When allocating the &drm_mm_node
  * from within the hole, the &drm_mm_insert_mode also dictate whether to
  * allocate the lowest matching address or the highest.
  */
 enum drm_mm_insert_mode {
 	/**
 	 * @DRM_MM_INSERT_BEST:
 	 *
 	 * Search for the smallest hole (within the search range) that fits
 	 * the desired node.
 	 *
 	 * Allocates the node from the bottom of the found hole.
 	 */
 	DRM_MM_INSERT_BEST = 0,

 	/**
 	 * @DRM_MM_INSERT_LOW:
 	 *
 	 * Search for the lowest hole (address closest to 0, within the search
 	 * range) that fits the desired node.
 	 *
 	 * Allocates the node from the bottom of the found hole.
 	 */
 	DRM_MM_INSERT_LOW,

 	/**
 	 * @DRM_MM_INSERT_HIGH:
 	 *
 	 * Search for the highest hole (address closest to U64_MAX, within the
 	 * search range) that fits the desired node.
 	 *
 	 * Allocates the node from the *top* of the found hole. The specified
 	 * alignment for the node is applied to the base of the node
 	 * (&drm_mm_node.start).
 	 */
 	DRM_MM_INSERT_HIGH,

 	/**
 	 * @DRM_MM_INSERT_EVICT:
 	 *
 	 * Search for the most recently evicted hole (within the search range)
 	 * that fits the desired node. This is appropriate for use immediately
 	 * after performing an eviction scan (see drm_mm_scan_init()) and
 	 * removing the selected nodes to form a hole.
 	 *
 	 * Allocates the node from the bottom of the found hole.
 	 */
 	DRM_MM_INSERT_EVICT,
 };

 /**
  * struct drm_mm_node - allocated block in the DRM allocator
  *
  * This represents an allocated block in a &drm_mm allocator. Except for
  * pre-reserved nodes inserted using drm_mm_reserve_node() the structure is
  * entirely opaque and should only be accessed through the provided funcions.
  * Since allocation of these nodes is entirely handled by the driver they can be
  * embedded.
  */
 struct drm_mm_node {
 	/** @color: Opaque driver-private tag. */
 	unsigned long color;
 	/** @start: Start address of the allocated block. */
 	u64 start;
 	/** @size: Size of the allocated block. */
 	u64 size;
 	/* private: */
 	struct drm_mm *mm;
 	struct list_head node_list;
 	struct list_head hole_stack;
 	struct rb_node rb;
 	struct rb_node rb_hole_size;
 	struct rb_node rb_hole_addr;
 	u64 __subtree_last;
 	u64 hole_size;
 	bool allocated : 1;
 	bool scanned_block : 1;
 #ifdef CONFIG_DRM_DEBUG_MM
 	depot_stack_handle_t stack;
 #endif
 };

 /**
  * struct drm_mm - DRM allocator
  *
  * DRM range allocator with a few special functions and features geared towards
  * managing GPU memory. Except for the @color_adjust callback the structure is
  * entirely opaque and should only be accessed through the provided functions
  * and macros. This structure can be embedded into larger driver structures.
  */
 struct drm_mm {
 	/**
 	 * @color_adjust:
 	 *
 	 * Optional driver callback to further apply restrictions on a hole. The
 	 * node argument points at the node containing the hole from which the
 	 * block would be allocated (see drm_mm_hole_follows() and friends). The
 	 * other arguments are the size of the block to be allocated. The driver
 	 * can adjust the start and end as needed to e.g. insert guard pages.
 	 */
 	void (*color_adjust)(const struct drm_mm_node *node,
 			     unsigned long color,
 			     u64 *start, u64 *end);

 	/* private: */
 	/* List of all memory nodes that immediately precede a free hole. */
 	struct list_head hole_stack;
 	/* head_node.node_list is the list of all memory nodes, ordered
 	 * according to the (increasing) start address of the memory node. */
 	struct drm_mm_node head_node;
 	/* Keep an interval_tree for fast lookup of drm_mm_nodes by address. */
 	struct rb_root interval_tree;
 	struct rb_root holes_size;
 	struct rb_root holes_addr;

 	unsigned long scan_active;
 };

 /**
  * struct drm_mm_scan - DRM allocator eviction roaster data
  *
  * This structure tracks data needed for the eviction roaster set up using
  * drm_mm_scan_init(), and used with drm_mm_scan_add_block() and
  * drm_mm_scan_remove_block(). The structure is entirely opaque and should only
  * be accessed through the provided functions and macros. It is meant to be
  * allocated temporarily by the driver on the stack.
  */
 struct drm_mm_scan {
 	/* private: */
 	struct drm_mm *mm;

 	u64 size;
 	u64 alignment;
 	u64 remainder_mask;

 	u64 range_start;
 	u64 range_end;

 	u64 hit_start;
 	u64 hit_end;

 	unsigned long color;
 	enum drm_mm_insert_mode mode;
 };

 /**
  * drm_mm_node_allocated - checks whether a node is allocated
  * @node: drm_mm_node to check
  *
  * Drivers are required to clear a node prior to using it with the
  * drm_mm range manager.
  *
  * Drivers should use this helper for proper encapsulation of drm_mm
  * internals.
  *
  * Returns:
  * True if the @node is allocated.
  */
 static inline bool drm_mm_node_allocated(const struct drm_mm_node *node)
 {
 	return node->allocated;
 }

 /**
  * drm_mm_initialized - checks whether an allocator is initialized
  * @mm: drm_mm to check
  *
  * Drivers should clear the struct drm_mm prior to initialisation if they
  * want to use this function.
  *
  * Drivers should use this helper for proper encapsulation of drm_mm
  * internals.
  *
  * Returns:
  * True if the @mm is initialized.
  */
 static inline bool drm_mm_initialized(const struct drm_mm *mm)
 {
 	return mm->hole_stack.next;
 }

 /**
  * drm_mm_hole_follows - checks whether a hole follows this node
  * @node: drm_mm_node to check
  *
  * Holes are embedded into the drm_mm using the tail of a drm_mm_node.
  * If you wish to know whether a hole follows this particular node,
  * query this function. See also drm_mm_hole_node_start() and
  * drm_mm_hole_node_end().
  *
  * Returns:
  * True if a hole follows the @node.
  */
 static inline bool drm_mm_hole_follows(const struct drm_mm_node *node)
 {
 	return node->hole_size;
 }

 static inline u64 __drm_mm_hole_node_start(const struct drm_mm_node *hole_node)
 {
 	return hole_node->start + hole_node->size;
 }

 /**
  * drm_mm_hole_node_start - computes the start of the hole following @node
  * @hole_node: drm_mm_node which implicitly tracks the following hole
  *
  * This is useful for driver-specific debug dumpers. Otherwise drivers should
  * not inspect holes themselves. Drivers must check first whether a hole indeed
  * follows by looking at drm_mm_hole_follows()
  *
  * Returns:
  * Start of the subsequent hole.
  */
 static inline u64 drm_mm_hole_node_start(const struct drm_mm_node *hole_node)
 {
 	DRM_MM_BUG_ON(!drm_mm_hole_follows(hole_node));
 	return __drm_mm_hole_node_start(hole_node);
 }

 static inline u64 __drm_mm_hole_node_end(const struct drm_mm_node *hole_node)
 {
 	return list_next_entry(hole_node, node_list)->start;
 }

 /**
  * drm_mm_hole_node_end - computes the end of the hole following @node
  * @hole_node: drm_mm_node which implicitly tracks the following hole
  *
  * This is useful for driver-specific debug dumpers. Otherwise drivers should
  * not inspect holes themselves. Drivers must check first whether a hole indeed
  * follows by looking at drm_mm_hole_follows().
  *
  * Returns:
  * End of the subsequent hole.
  */
 static inline u64 drm_mm_hole_node_end(const struct drm_mm_node *hole_node)
 {
 	return __drm_mm_hole_node_end(hole_node);
 }

 /**
  * drm_mm_nodes - list of nodes under the drm_mm range manager
  * @mm: the struct drm_mm range manger
  *
  * As the drm_mm range manager hides its node_list deep with its
  * structure, extracting it looks painful and repetitive. This is
  * not expected to be used outside of the drm_mm_for_each_node()
  * macros and similar internal functions.
  *
  * Returns:
  * The node list, may be empty.
  */
 #define drm_mm_nodes(mm) (&(mm)->head_node.node_list)

 /**
  * drm_mm_for_each_node - iterator to walk over all allocated nodes
  * @entry: &struct drm_mm_node to assign to in each iteration step
  * @mm: &drm_mm allocator to walk
  *
  * This iterator walks over all nodes in the range allocator. It is implemented
  * with list_for_each(), so not save against removal of elements.
  */
 #define drm_mm_for_each_node(entry, mm) \
 	list_for_each_entry(entry, drm_mm_nodes(mm), node_list)

 /**
  * drm_mm_for_each_node_safe - iterator to walk over all allocated nodes
  * @entry: &struct drm_mm_node to assign to in each iteration step
  * @next: &struct drm_mm_node to store the next step
  * @mm: &drm_mm allocator to walk
  *
  * This iterator walks over all nodes in the range allocator. It is implemented
  * with list_for_each_safe(), so save against removal of elements.
  */
 #define drm_mm_for_each_node_safe(entry, next, mm) \
 	list_for_each_entry_safe(entry, next, drm_mm_nodes(mm), node_list)

 /**
  * drm_mm_for_each_hole - iterator to walk over all holes
  * @pos: &drm_mm_node used internally to track progress
  * @mm: &drm_mm allocator to walk
  * @hole_start: ulong variable to assign the hole start to on each iteration
  * @hole_end: ulong variable to assign the hole end to on each iteration
  *
  * This iterator walks over all holes in the range allocator. It is implemented
  * with list_for_each(), so not save against removal of elements. @entry is used
  * internally and will not reflect a real drm_mm_node for the very first hole.
  * Hence users of this iterator may not access it.
  *
  * Implementation Note:
  * We need to inline list_for_each_entry in order to be able to set hole_start
  * and hole_end on each iteration while keeping the macro sane.
  */
 #define drm_mm_for_each_hole(pos, mm, hole_start, hole_end) \
 	for (pos = list_first_entry(&(mm)->hole_stack, \
 				    typeof(*pos), hole_stack); \
 	     &pos->hole_stack != &(mm)->hole_stack ? \
 	     hole_start = drm_mm_hole_node_start(pos), \
 	     hole_end = hole_start + pos->hole_size, \
 	     1 : 0; \
 	     pos = list_next_entry(pos, hole_stack))

 /*
  * Basic range manager support (drm_mm.c)
  */
 int drm_mm_reserve_node(struct drm_mm *mm, struct drm_mm_node *node);
 int drm_mm_insert_node_in_range(struct drm_mm *mm,
 				struct drm_mm_node *node,
 				u64 size,
 				u64 alignment,
 				unsigned long color,
 				u64 start,
 				u64 end,
 				enum drm_mm_insert_mode mode);

 /**
  * drm_mm_insert_node_generic - search for space and insert @node
  * @mm: drm_mm to allocate from
  * @node: preallocate node to insert
  * @size: size of the allocation
  * @alignment: alignment of the allocation
  * @color: opaque tag value to use for this node
  * @mode: fine-tune the allocation search and placement
  *
  * This is a simplified version of drm_mm_insert_node_in_range_generic() with no
  * range restrictions applied.
  *
  * The preallocated node must be cleared to 0.
  *
  * Returns:
  * 0 on success, -ENOSPC if there's no suitable hole.
  */
 static inline int
 drm_mm_insert_node_generic(struct drm_mm *mm, struct drm_mm_node *node,
 			   u64 size, u64 alignment,
 			   unsigned long color,
 			   enum drm_mm_insert_mode mode)
 {
 	return drm_mm_insert_node_in_range(mm, node,
 					   size, alignment, color,
 					   0, U64_MAX, mode);
 }

 /**
  * drm_mm_insert_node - search for space and insert @node
  * @mm: drm_mm to allocate from
  * @node: preallocate node to insert
  * @size: size of the allocation
  *
  * This is a simplified version of drm_mm_insert_node_generic() with @color set
  * to 0.
  *
  * The preallocated node must be cleared to 0.
  *
  * Returns:
  * 0 on success, -ENOSPC if there's no suitable hole.
  */
 static inline int drm_mm_insert_node(struct drm_mm *mm,
 				     struct drm_mm_node *node,
 				     u64 size)
 {
 	return drm_mm_insert_node_generic(mm, node, size, 0, 0, 0);
 }

 void drm_mm_remove_node(struct drm_mm_node *node);
 void drm_mm_replace_node(struct drm_mm_node *old, struct drm_mm_node *new);
 void drm_mm_init(struct drm_mm *mm, u64 start, u64 size);
 void drm_mm_takedown(struct drm_mm *mm);

 /**
  * drm_mm_clean - checks whether an allocator is clean
  * @mm: drm_mm allocator to check
  *
  * Returns:
  * True if the allocator is completely free, false if there's still a node
  * allocated in it.
  */
 static inline bool drm_mm_clean(const struct drm_mm *mm)
 {
 	return list_empty(drm_mm_nodes(mm));
 }

 struct drm_mm_node *
 __drm_mm_interval_first(const struct drm_mm *mm, u64 start, u64 last);

 /**
  * drm_mm_for_each_node_in_range - iterator to walk over a range of
  * allocated nodes
  * @node__: drm_mm_node structure to assign to in each iteration step
  * @mm__: drm_mm allocator to walk
  * @start__: starting offset, the first node will overlap this
  * @end__: ending offset, the last node will start before this (but may overlap)
  *
  * This iterator walks over all nodes in the range allocator that lie
  * between @start and @end. It is implemented similarly to list_for_each(),
  * but using the internal interval tree to accelerate the search for the
  * starting node, and so not safe against removal of elements. It assumes
  * that @end is within (or is the upper limit of) the drm_mm allocator.
  */
 #define drm_mm_for_each_node_in_range(node__, mm__, start__, end__)	\
 	for (node__ = __drm_mm_interval_first((mm__), (start__), (end__)-1); \
 	     node__ && node__->start < (end__);				\
 	     node__ = list_next_entry(node__, node_list))

 void drm_mm_scan_init_with_range(struct drm_mm_scan *scan,
 				 struct drm_mm *mm,
 				 u64 size, u64 alignment, unsigned long color,
 				 u64 start, u64 end,
 				 enum drm_mm_insert_mode mode);

 /**
  * drm_mm_scan_init - initialize lru scanning
  * @scan: scan state
  * @mm: drm_mm to scan
  * @size: size of the allocation
  * @alignment: alignment of the allocation
  * @color: opaque tag value to use for the allocation
  * @mode: fine-tune the allocation search and placement
  *
  * This is a simplified version of drm_mm_scan_init_with_range() with no range
  * restrictions applied.
  *
  * This simply sets up the scanning routines with the parameters for the desired
  * hole.
  *
  * Warning:
  * As long as the scan list is non-empty, no other operations than
  * adding/removing nodes to/from the scan list are allowed.
  */
 static inline void drm_mm_scan_init(struct drm_mm_scan *scan,
 				    struct drm_mm *mm,
 				    u64 size,
 				    u64 alignment,
 				    unsigned long color,
 				    enum drm_mm_insert_mode mode)
 {
 	drm_mm_scan_init_with_range(scan, mm,
 				    size, alignment, color,
 				    0, U64_MAX, mode);
 }

 bool drm_mm_scan_add_block(struct drm_mm_scan *scan,
 			   struct drm_mm_node *node);
 bool drm_mm_scan_remove_block(struct drm_mm_scan *scan,
 			      struct drm_mm_node *node);
 struct drm_mm_node *drm_mm_scan_color_evict(struct drm_mm_scan *scan);

 void drm_mm_print(const struct drm_mm *mm, struct drm_printer *p);

 #endif
	/**************************************************************************
	*
	* Copyright 2006-2008 Tungsten Graphics, Inc., Cedar Park, TX. USA.
	* Copyright 2016 Intel Corporation
	* All Rights Reserved.
	*
	* Permission is hereby granted, free of charge, to any person obtaining a
	* copy of this software and associated documentation files (the
	* "Software"), to deal in the Software without restriction, including
	* without limitation the rights to use, copy, modify, merge, publish,
	* distribute, sub license, and/or sell copies of the Software, and to
	* permit persons to whom the Software is furnished to do so, subject to
	* the following conditions:
	*
	* The above copyright notice and this permission notice (including the
	* next paragraph) shall be included in all copies or substantial portions
	* of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
	* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
	* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
	* THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
	* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
	* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
	* USE OR OTHER DEALINGS IN THE SOFTWARE.
	*
	*
	**************************************************************************/
	/*
	* Authors:
	* Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
	*/

	#ifndef _DRM_MM_H_
	#define _DRM_MM_H_

	/*
	* Generic range manager structs
	*/
	#include <linux/bug.h>
	#include <linux/rbtree.h>
	#include <linux/kernel.h>
	#include <linux/list.h>
	#include <linux/spinlock.h>
	#ifdef CONFIG_DRM_DEBUG_MM
	#include <linux/stackdepot.h>
	#endif
	#include <drm/drm_print.h>

	#ifdef CONFIG_DRM_DEBUG_MM
	#define DRM_MM_BUG_ON(expr) BUG_ON(expr)
	#else
	#define DRM_MM_BUG_ON(expr) BUILD_BUG_ON_INVALID(expr)
	#endif

	/**
	* enum drm_mm_insert_mode - control search and allocation behaviour
	*
	* The &struct drm_mm range manager supports finding a suitable modes using
	* a number of search trees. These trees are oranised by size, by address and
	* in most recent eviction order. This allows the user to find either the
	* smallest hole to reuse, the lowest or highest address to reuse, or simply
	* reuse the most recent eviction that fits. When allocating the &drm_mm_node
	* from within the hole, the &drm_mm_insert_mode also dictate whether to
	* allocate the lowest matching address or the highest.
	*/
	enum drm_mm_insert_mode {
	/**
	* @DRM_MM_INSERT_BEST:
	*
	* Search for the smallest hole (within the search range) that fits
	* the desired node.
	*
	* Allocates the node from the bottom of the found hole.
	*/
	DRM_MM_INSERT_BEST = 0,

	/**
	* @DRM_MM_INSERT_LOW:
	*
	* Search for the lowest hole (address closest to 0, within the search
	* range) that fits the desired node.
	*
	* Allocates the node from the bottom of the found hole.
	*/
	DRM_MM_INSERT_LOW,

	/**
	* @DRM_MM_INSERT_HIGH:
	*
	* Search for the highest hole (address closest to U64_MAX, within the
	* search range) that fits the desired node.
	*
	* Allocates the node from the top of the found hole. The specified
	* alignment for the node is applied to the base of the node
	* (&drm_mm_node.start).
	*/
	DRM_MM_INSERT_HIGH,

	/**
	* @DRM_MM_INSERT_EVICT:
	*
	* Search for the most recently evicted hole (within the search range)
	* that fits the desired node. This is appropriate for use immediately
	* after performing an eviction scan (see drm_mm_scan_init()) and
	* removing the selected nodes to form a hole.
	*
	* Allocates the node from the bottom of the found hole.
	*/
	DRM_MM_INSERT_EVICT,
	};

	/**
	* struct drm_mm_node - allocated block in the DRM allocator
	*
	* This represents an allocated block in a &drm_mm allocator. Except for
	* pre-reserved nodes inserted using drm_mm_reserve_node() the structure is
	* entirely opaque and should only be accessed through the provided funcions.
	* Since allocation of these nodes is entirely handled by the driver they can be
	* embedded.
	*/
	struct drm_mm_node {
	/** @color: Opaque driver-private tag. */
	unsigned long color;
	/** @start: Start address of the allocated block. */
	u64 start;
	/** @size: Size of the allocated block. */
	u64 size;
	/* private: */
	struct drm_mm *mm;
	struct list_head node_list;
	struct list_head hole_stack;
	struct rb_node rb;
	struct rb_node rb_hole_size;
	struct rb_node rb_hole_addr;
	u64 __subtree_last;
	u64 hole_size;
	bool allocated : 1;
	bool scanned_block : 1;
	#ifdef CONFIG_DRM_DEBUG_MM
	depot_stack_handle_t stack;
	#endif
	};

	/**
	* struct drm_mm - DRM allocator
	*
	* DRM range allocator with a few special functions and features geared towards
	* managing GPU memory. Except for the @color_adjust callback the structure is
	* entirely opaque and should only be accessed through the provided functions
	* and macros. This structure can be embedded into larger driver structures.
	*/
	struct drm_mm {
	/**
	* @color_adjust:
	*
	* Optional driver callback to further apply restrictions on a hole. The
	* node argument points at the node containing the hole from which the
	* block would be allocated (see drm_mm_hole_follows() and friends). The
	* other arguments are the size of the block to be allocated. The driver
	* can adjust the start and end as needed to e.g. insert guard pages.
	*/
	void (color_adjust)(const struct drm_mm_node node,
	unsigned long color,
	u64 start, u64 end);

	/* private: */
	/* List of all memory nodes that immediately precede a free hole. */
	struct list_head hole_stack;
	/* head_node.node_list is the list of all memory nodes, ordered
	* according to the (increasing) start address of the memory node. */
	struct drm_mm_node head_node;
	/* Keep an interval_tree for fast lookup of drm_mm_nodes by address. */
	struct rb_root interval_tree;
	struct rb_root holes_size;
	struct rb_root holes_addr;

	unsigned long scan_active;
	};

	/**
	* struct drm_mm_scan - DRM allocator eviction roaster data
	*
	* This structure tracks data needed for the eviction roaster set up using
	* drm_mm_scan_init(), and used with drm_mm_scan_add_block() and
	* drm_mm_scan_remove_block(). The structure is entirely opaque and should only
	* be accessed through the provided functions and macros. It is meant to be
	* allocated temporarily by the driver on the stack.
	*/
	struct drm_mm_scan {
	/* private: */
	struct drm_mm *mm;

	u64 size;
	u64 alignment;
	u64 remainder_mask;

	u64 range_start;
	u64 range_end;

	u64 hit_start;
	u64 hit_end;

	unsigned long color;
	enum drm_mm_insert_mode mode;
	};

	/**
	* drm_mm_node_allocated - checks whether a node is allocated
	* @node: drm_mm_node to check
	*
	* Drivers are required to clear a node prior to using it with the
	* drm_mm range manager.
	*
	* Drivers should use this helper for proper encapsulation of drm_mm
	* internals.
	*
	* Returns:
	* True if the @node is allocated.
	*/
	static inline bool drm_mm_node_allocated(const struct drm_mm_node *node)
	{
	return node->allocated;
	}

	/**
	* drm_mm_initialized - checks whether an allocator is initialized
	* @mm: drm_mm to check
	*
	* Drivers should clear the struct drm_mm prior to initialisation if they
	* want to use this function.
	*
	* Drivers should use this helper for proper encapsulation of drm_mm
	* internals.
	*
	* Returns:
	* True if the @mm is initialized.
	*/
	static inline bool drm_mm_initialized(const struct drm_mm *mm)
	{
	return mm->hole_stack.next;
	}

	/**
	* drm_mm_hole_follows - checks whether a hole follows this node
	* @node: drm_mm_node to check
	*
	* Holes are embedded into the drm_mm using the tail of a drm_mm_node.
	* If you wish to know whether a hole follows this particular node,
	* query this function. See also drm_mm_hole_node_start() and
	* drm_mm_hole_node_end().
	*
	* Returns:
	* True if a hole follows the @node.
	*/
	static inline bool drm_mm_hole_follows(const struct drm_mm_node *node)
	{
	return node->hole_size;
	}

	static inline u64 __drm_mm_hole_node_start(const struct drm_mm_node *hole_node)
	{
	return hole_node->start + hole_node->size;
	}

	/**
	* drm_mm_hole_node_start - computes the start of the hole following @node
	* @hole_node: drm_mm_node which implicitly tracks the following hole
	*
	* This is useful for driver-specific debug dumpers. Otherwise drivers should
	* not inspect holes themselves. Drivers must check first whether a hole indeed
	* follows by looking at drm_mm_hole_follows()
	*
	* Returns:
	* Start of the subsequent hole.
	*/
	static inline u64 drm_mm_hole_node_start(const struct drm_mm_node *hole_node)
	{
	DRM_MM_BUG_ON(!drm_mm_hole_follows(hole_node));
	return __drm_mm_hole_node_start(hole_node);
	}

	static inline u64 __drm_mm_hole_node_end(const struct drm_mm_node *hole_node)
	{
	return list_next_entry(hole_node, node_list)->start;
	}

	/**
	* drm_mm_hole_node_end - computes the end of the hole following @node
	* @hole_node: drm_mm_node which implicitly tracks the following hole
	*
	* This is useful for driver-specific debug dumpers. Otherwise drivers should
	* not inspect holes themselves. Drivers must check first whether a hole indeed
	* follows by looking at drm_mm_hole_follows().
	*
	* Returns:
	* End of the subsequent hole.
	*/
	static inline u64 drm_mm_hole_node_end(const struct drm_mm_node *hole_node)
	{
	return __drm_mm_hole_node_end(hole_node);
	}

	/**
	* drm_mm_nodes - list of nodes under the drm_mm range manager
	* @mm: the struct drm_mm range manger
	*
	* As the drm_mm range manager hides its node_list deep with its
	* structure, extracting it looks painful and repetitive. This is
	* not expected to be used outside of the drm_mm_for_each_node()
	* macros and similar internal functions.
	*
	* Returns:
	* The node list, may be empty.
	*/
	#define drm_mm_nodes(mm) (&(mm)->head_node.node_list)

	/**
	* drm_mm_for_each_node - iterator to walk over all allocated nodes
	* @entry: &struct drm_mm_node to assign to in each iteration step
	* @mm: &drm_mm allocator to walk
	*
	* This iterator walks over all nodes in the range allocator. It is implemented
	* with list_for_each(), so not save against removal of elements.
	*/
	#define drm_mm_for_each_node(entry, mm) \
	list_for_each_entry(entry, drm_mm_nodes(mm), node_list)

	/**
	* drm_mm_for_each_node_safe - iterator to walk over all allocated nodes
	* @entry: &struct drm_mm_node to assign to in each iteration step
	* @next: &struct drm_mm_node to store the next step
	* @mm: &drm_mm allocator to walk
	*
	* This iterator walks over all nodes in the range allocator. It is implemented
	* with list_for_each_safe(), so save against removal of elements.
	*/
	#define drm_mm_for_each_node_safe(entry, next, mm) \
	list_for_each_entry_safe(entry, next, drm_mm_nodes(mm), node_list)

	/**
	* drm_mm_for_each_hole - iterator to walk over all holes
	* @pos: &drm_mm_node used internally to track progress
	* @mm: &drm_mm allocator to walk
	* @hole_start: ulong variable to assign the hole start to on each iteration
	* @hole_end: ulong variable to assign the hole end to on each iteration
	*
	* This iterator walks over all holes in the range allocator. It is implemented
	* with list_for_each(), so not save against removal of elements. @entry is used
	* internally and will not reflect a real drm_mm_node for the very first hole.
	* Hence users of this iterator may not access it.
	*
	* Implementation Note:
	* We need to inline list_for_each_entry in order to be able to set hole_start
	* and hole_end on each iteration while keeping the macro sane.
	*/
	#define drm_mm_for_each_hole(pos, mm, hole_start, hole_end) \
	for (pos = list_first_entry(&(mm)->hole_stack, \
	typeof(*pos), hole_stack); \
	&pos->hole_stack != &(mm)->hole_stack ? \
	hole_start = drm_mm_hole_node_start(pos), \
	hole_end = hole_start + pos->hole_size, \
	1 : 0; \
	pos = list_next_entry(pos, hole_stack))

	/*
	* Basic range manager support (drm_mm.c)
	*/
	int drm_mm_reserve_node(struct drm_mm mm, struct drm_mm_node node);
	int drm_mm_insert_node_in_range(struct drm_mm *mm,
	struct drm_mm_node *node,
	u64 size,
	u64 alignment,
	unsigned long color,
	u64 start,
	u64 end,
	enum drm_mm_insert_mode mode);

	/**
	* drm_mm_insert_node_generic - search for space and insert @node
	* @mm: drm_mm to allocate from
	* @node: preallocate node to insert
	* @size: size of the allocation
	* @alignment: alignment of the allocation
	* @color: opaque tag value to use for this node
	* @mode: fine-tune the allocation search and placement
	*
	* This is a simplified version of drm_mm_insert_node_in_range_generic() with no
	* range restrictions applied.
	*
	* The preallocated node must be cleared to 0.
	*
	* Returns:
	* 0 on success, -ENOSPC if there's no suitable hole.
	*/
	static inline int
	drm_mm_insert_node_generic(struct drm_mm mm, struct drm_mm_node node,
	u64 size, u64 alignment,
	unsigned long color,
	enum drm_mm_insert_mode mode)
	{
	return drm_mm_insert_node_in_range(mm, node,
	size, alignment, color,
	0, U64_MAX, mode);
	}

	/**
	* drm_mm_insert_node - search for space and insert @node
	* @mm: drm_mm to allocate from
	* @node: preallocate node to insert
	* @size: size of the allocation
	*
	* This is a simplified version of drm_mm_insert_node_generic() with @color set
	* to 0.
	*
	* The preallocated node must be cleared to 0.
	*
	* Returns:
	* 0 on success, -ENOSPC if there's no suitable hole.
	*/
	static inline int drm_mm_insert_node(struct drm_mm *mm,
	struct drm_mm_node *node,
	u64 size)
	{
	return drm_mm_insert_node_generic(mm, node, size, 0, 0, 0);
	}

	void drm_mm_remove_node(struct drm_mm_node *node);
	void drm_mm_replace_node(struct drm_mm_node old, struct drm_mm_node new);
	void drm_mm_init(struct drm_mm *mm, u64 start, u64 size);
	void drm_mm_takedown(struct drm_mm *mm);

	/**
	* drm_mm_clean - checks whether an allocator is clean
	* @mm: drm_mm allocator to check
	*
	* Returns:
	* True if the allocator is completely free, false if there's still a node
	* allocated in it.
	*/
	static inline bool drm_mm_clean(const struct drm_mm *mm)
	{
	return list_empty(drm_mm_nodes(mm));
	}

	struct drm_mm_node *
	__drm_mm_interval_first(const struct drm_mm *mm, u64 start, u64 last);

	/**
	* drm_mm_for_each_node_in_range - iterator to walk over a range of
	* allocated nodes
	* @node__: drm_mm_node structure to assign to in each iteration step
	* @mm__: drm_mm allocator to walk
	* @start__: starting offset, the first node will overlap this
	* @end__: ending offset, the last node will start before this (but may overlap)
	*
	* This iterator walks over all nodes in the range allocator that lie
	* between @start and @end. It is implemented similarly to list_for_each(),
	* but using the internal interval tree to accelerate the search for the
	* starting node, and so not safe against removal of elements. It assumes
	* that @end is within (or is the upper limit of) the drm_mm allocator.
	*/
	#define drm_mm_for_each_node_in_range(node__, mm__, start__, end__) \
	for (node__ = __drm_mm_interval_first((mm__), (start__), (end__)-1); \
	node__ && node__->start < (end__); \
	node__ = list_next_entry(node__, node_list))

	void drm_mm_scan_init_with_range(struct drm_mm_scan *scan,
	struct drm_mm *mm,
	u64 size, u64 alignment, unsigned long color,
	u64 start, u64 end,
	enum drm_mm_insert_mode mode);

	/**
	* drm_mm_scan_init - initialize lru scanning
	* @scan: scan state
	* @mm: drm_mm to scan
	* @size: size of the allocation
	* @alignment: alignment of the allocation
	* @color: opaque tag value to use for the allocation
	* @mode: fine-tune the allocation search and placement
	*
	* This is a simplified version of drm_mm_scan_init_with_range() with no range
	* restrictions applied.
	*
	* This simply sets up the scanning routines with the parameters for the desired
	* hole.
	*
	* Warning:
	* As long as the scan list is non-empty, no other operations than
	* adding/removing nodes to/from the scan list are allowed.
	*/
	static inline void drm_mm_scan_init(struct drm_mm_scan *scan,
	struct drm_mm *mm,
	u64 size,
	u64 alignment,
	unsigned long color,
	enum drm_mm_insert_mode mode)
	{
	drm_mm_scan_init_with_range(scan, mm,
	size, alignment, color,
	0, U64_MAX, mode);
	}

	bool drm_mm_scan_add_block(struct drm_mm_scan *scan,
	struct drm_mm_node *node);
	bool drm_mm_scan_remove_block(struct drm_mm_scan *scan,
	struct drm_mm_node *node);
	struct drm_mm_node drm_mm_scan_color_evict(struct drm_mm_scan scan);

	void drm_mm_print(const struct drm_mm mm, struct drm_printer p);

	#endif