| /* ir-sysfs.c - sysfs interface for RC devices (/sys/class/rc) |
| * |
| * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/input.h> |
| #include <linux/device.h> |
| #include "ir-core-priv.h" |
| |
| #define IRRCV_NUM_DEVICES 256 |
| |
| /* bit array to represent IR sysfs device number */ |
| static unsigned long ir_core_dev_number; |
| |
| /* class for /sys/class/rc */ |
| static char *ir_devnode(struct device *dev, mode_t *mode) |
| { |
| return kasprintf(GFP_KERNEL, "rc/%s", dev_name(dev)); |
| } |
| |
| static struct class ir_input_class = { |
| .name = "rc", |
| .devnode = ir_devnode, |
| }; |
| |
| static struct { |
| u64 type; |
| char *name; |
| } proto_names[] = { |
| { IR_TYPE_UNKNOWN, "unknown" }, |
| { IR_TYPE_RC5, "rc-5" }, |
| { IR_TYPE_NEC, "nec" }, |
| { IR_TYPE_RC6, "rc-6" }, |
| { IR_TYPE_JVC, "jvc" }, |
| { IR_TYPE_SONY, "sony" }, |
| { IR_TYPE_LIRC, "lirc" }, |
| }; |
| |
| #define PROTO_NONE "none" |
| |
| /** |
| * show_protocols() - shows the current IR protocol(s) |
| * @d: the device descriptor |
| * @mattr: the device attribute struct (unused) |
| * @buf: a pointer to the output buffer |
| * |
| * This routine is a callback routine for input read the IR protocol type(s). |
| * it is trigged by reading /sys/class/rc/rc?/protocols. |
| * It returns the protocol names of supported protocols. |
| * Enabled protocols are printed in brackets. |
| */ |
| static ssize_t show_protocols(struct device *d, |
| struct device_attribute *mattr, char *buf) |
| { |
| struct ir_input_dev *ir_dev = dev_get_drvdata(d); |
| u64 allowed, enabled; |
| char *tmp = buf; |
| int i; |
| |
| if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) { |
| enabled = ir_dev->rc_tab.ir_type; |
| allowed = ir_dev->props->allowed_protos; |
| } else { |
| enabled = ir_dev->raw->enabled_protocols; |
| allowed = ir_raw_get_allowed_protocols(); |
| } |
| |
| IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n", |
| (long long)allowed, |
| (long long)enabled); |
| |
| for (i = 0; i < ARRAY_SIZE(proto_names); i++) { |
| if (allowed & enabled & proto_names[i].type) |
| tmp += sprintf(tmp, "[%s] ", proto_names[i].name); |
| else if (allowed & proto_names[i].type) |
| tmp += sprintf(tmp, "%s ", proto_names[i].name); |
| } |
| |
| if (tmp != buf) |
| tmp--; |
| *tmp = '\n'; |
| return tmp + 1 - buf; |
| } |
| |
| /** |
| * store_protocols() - changes the current IR protocol(s) |
| * @d: the device descriptor |
| * @mattr: the device attribute struct (unused) |
| * @buf: a pointer to the input buffer |
| * @len: length of the input buffer |
| * |
| * This routine is a callback routine for changing the IR protocol type. |
| * It is trigged by writing to /sys/class/rc/rc?/protocols. |
| * Writing "+proto" will add a protocol to the list of enabled protocols. |
| * Writing "-proto" will remove a protocol from the list of enabled protocols. |
| * Writing "proto" will enable only "proto". |
| * Writing "none" will disable all protocols. |
| * Returns -EINVAL if an invalid protocol combination or unknown protocol name |
| * is used, otherwise @len. |
| */ |
| static ssize_t store_protocols(struct device *d, |
| struct device_attribute *mattr, |
| const char *data, |
| size_t len) |
| { |
| struct ir_input_dev *ir_dev = dev_get_drvdata(d); |
| bool enable, disable; |
| const char *tmp; |
| u64 type; |
| u64 mask; |
| int rc, i, count = 0; |
| unsigned long flags; |
| |
| if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) |
| type = ir_dev->rc_tab.ir_type; |
| else |
| type = ir_dev->raw->enabled_protocols; |
| |
| while ((tmp = strsep((char **) &data, " \n")) != NULL) { |
| if (!*tmp) |
| break; |
| |
| if (*tmp == '+') { |
| enable = true; |
| disable = false; |
| tmp++; |
| } else if (*tmp == '-') { |
| enable = false; |
| disable = true; |
| tmp++; |
| } else { |
| enable = false; |
| disable = false; |
| } |
| |
| if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) { |
| tmp += sizeof(PROTO_NONE); |
| mask = 0; |
| count++; |
| } else { |
| for (i = 0; i < ARRAY_SIZE(proto_names); i++) { |
| if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) { |
| tmp += strlen(proto_names[i].name); |
| mask = proto_names[i].type; |
| break; |
| } |
| } |
| if (i == ARRAY_SIZE(proto_names)) { |
| IR_dprintk(1, "Unknown protocol: '%s'\n", tmp); |
| return -EINVAL; |
| } |
| count++; |
| } |
| |
| if (enable) |
| type |= mask; |
| else if (disable) |
| type &= ~mask; |
| else |
| type = mask; |
| } |
| |
| if (!count) { |
| IR_dprintk(1, "Protocol not specified\n"); |
| return -EINVAL; |
| } |
| |
| if (ir_dev->props && ir_dev->props->change_protocol) { |
| rc = ir_dev->props->change_protocol(ir_dev->props->priv, |
| type); |
| if (rc < 0) { |
| IR_dprintk(1, "Error setting protocols to 0x%llx\n", |
| (long long)type); |
| return -EINVAL; |
| } |
| } |
| |
| if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) { |
| spin_lock_irqsave(&ir_dev->rc_tab.lock, flags); |
| ir_dev->rc_tab.ir_type = type; |
| spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags); |
| } else { |
| ir_dev->raw->enabled_protocols = type; |
| } |
| |
| IR_dprintk(1, "Current protocol(s): 0x%llx\n", |
| (long long)type); |
| |
| return len; |
| } |
| |
| #define ADD_HOTPLUG_VAR(fmt, val...) \ |
| do { \ |
| int err = add_uevent_var(env, fmt, val); \ |
| if (err) \ |
| return err; \ |
| } while (0) |
| |
| static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env) |
| { |
| struct ir_input_dev *ir_dev = dev_get_drvdata(device); |
| |
| if (ir_dev->rc_tab.name) |
| ADD_HOTPLUG_VAR("NAME=%s", ir_dev->rc_tab.name); |
| if (ir_dev->driver_name) |
| ADD_HOTPLUG_VAR("DRV_NAME=%s", ir_dev->driver_name); |
| |
| return 0; |
| } |
| |
| /* |
| * Static device attribute struct with the sysfs attributes for IR's |
| */ |
| static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR, |
| show_protocols, store_protocols); |
| |
| static struct attribute *rc_dev_attrs[] = { |
| &dev_attr_protocols.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group rc_dev_attr_grp = { |
| .attrs = rc_dev_attrs, |
| }; |
| |
| static const struct attribute_group *rc_dev_attr_groups[] = { |
| &rc_dev_attr_grp, |
| NULL |
| }; |
| |
| static struct device_type rc_dev_type = { |
| .groups = rc_dev_attr_groups, |
| .uevent = rc_dev_uevent, |
| }; |
| |
| /** |
| * ir_register_class() - creates the sysfs for /sys/class/rc/rc? |
| * @input_dev: the struct input_dev descriptor of the device |
| * |
| * This routine is used to register the syfs code for IR class |
| */ |
| int ir_register_class(struct input_dev *input_dev) |
| { |
| int rc; |
| const char *path; |
| struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); |
| int devno = find_first_zero_bit(&ir_core_dev_number, |
| IRRCV_NUM_DEVICES); |
| |
| if (unlikely(devno < 0)) |
| return devno; |
| |
| ir_dev->dev.type = &rc_dev_type; |
| |
| ir_dev->dev.class = &ir_input_class; |
| ir_dev->dev.parent = input_dev->dev.parent; |
| dev_set_name(&ir_dev->dev, "rc%d", devno); |
| dev_set_drvdata(&ir_dev->dev, ir_dev); |
| rc = device_register(&ir_dev->dev); |
| if (rc) |
| return rc; |
| |
| |
| input_dev->dev.parent = &ir_dev->dev; |
| rc = input_register_device(input_dev); |
| if (rc < 0) { |
| device_del(&ir_dev->dev); |
| return rc; |
| } |
| |
| __module_get(THIS_MODULE); |
| |
| path = kobject_get_path(&ir_dev->dev.kobj, GFP_KERNEL); |
| printk(KERN_INFO "%s: %s as %s\n", |
| dev_name(&ir_dev->dev), |
| input_dev->name ? input_dev->name : "Unspecified device", |
| path ? path : "N/A"); |
| kfree(path); |
| |
| ir_dev->devno = devno; |
| set_bit(devno, &ir_core_dev_number); |
| |
| return 0; |
| }; |
| |
| /** |
| * ir_unregister_class() - removes the sysfs for sysfs for |
| * /sys/class/rc/rc? |
| * @input_dev: the struct input_dev descriptor of the device |
| * |
| * This routine is used to unregister the syfs code for IR class |
| */ |
| void ir_unregister_class(struct input_dev *input_dev) |
| { |
| struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); |
| |
| clear_bit(ir_dev->devno, &ir_core_dev_number); |
| input_unregister_device(input_dev); |
| device_del(&ir_dev->dev); |
| |
| module_put(THIS_MODULE); |
| } |
| |
| /* |
| * Init/exit code for the module. Basically, creates/removes /sys/class/rc |
| */ |
| |
| static int __init ir_core_init(void) |
| { |
| int rc = class_register(&ir_input_class); |
| if (rc) { |
| printk(KERN_ERR "ir_core: unable to register rc class\n"); |
| return rc; |
| } |
| |
| /* Initialize/load the decoders/keymap code that will be used */ |
| ir_raw_init(); |
| ir_rcmap_init(); |
| |
| return 0; |
| } |
| |
| static void __exit ir_core_exit(void) |
| { |
| class_unregister(&ir_input_class); |
| ir_rcmap_cleanup(); |
| } |
| |
| module_init(ir_core_init); |
| module_exit(ir_core_exit); |