blob: a9bd70537d6547b550a591b7775a8fcf4c76f186 [file] [log] [blame]
/*******************************************************************************
*
* Intel Ethernet Controller XL710 Family Linux Driver
* Copyright(c) 2013 - 2016 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along
* with this program. If not, see <http://www.gnu.org/licenses/>.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*
* Contact Information:
* e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
******************************************************************************/
#ifndef _I40E_TXRX_H_
#define _I40E_TXRX_H_
/* Interrupt Throttling and Rate Limiting Goodies */
#define I40E_MAX_ITR 0x0FF0 /* reg uses 2 usec resolution */
#define I40E_MIN_ITR 0x0001 /* reg uses 2 usec resolution */
#define I40E_ITR_100K 0x0005
#define I40E_ITR_50K 0x000A
#define I40E_ITR_20K 0x0019
#define I40E_ITR_18K 0x001B
#define I40E_ITR_8K 0x003E
#define I40E_ITR_4K 0x007A
#define I40E_MAX_INTRL 0x3B /* reg uses 4 usec resolution */
#define I40E_ITR_RX_DEF I40E_ITR_20K
#define I40E_ITR_TX_DEF I40E_ITR_20K
#define I40E_ITR_DYNAMIC 0x8000 /* use top bit as a flag */
#define I40E_MIN_INT_RATE 250 /* ~= 1000000 / (I40E_MAX_ITR * 2) */
#define I40E_MAX_INT_RATE 500000 /* == 1000000 / (I40E_MIN_ITR * 2) */
#define I40E_DEFAULT_IRQ_WORK 256
#define ITR_TO_REG(setting) ((setting & ~I40E_ITR_DYNAMIC) >> 1)
#define ITR_IS_DYNAMIC(setting) (!!(setting & I40E_ITR_DYNAMIC))
#define ITR_REG_TO_USEC(itr_reg) (itr_reg << 1)
/* 0x40 is the enable bit for interrupt rate limiting, and must be set if
* the value of the rate limit is non-zero
*/
#define INTRL_ENA BIT(6)
#define INTRL_REG_TO_USEC(intrl) ((intrl & ~INTRL_ENA) << 2)
#define INTRL_USEC_TO_REG(set) ((set) ? ((set) >> 2) | INTRL_ENA : 0)
#define I40E_INTRL_8K 125 /* 8000 ints/sec */
#define I40E_INTRL_62K 16 /* 62500 ints/sec */
#define I40E_INTRL_83K 12 /* 83333 ints/sec */
#define I40E_QUEUE_END_OF_LIST 0x7FF
/* this enum matches hardware bits and is meant to be used by DYN_CTLN
* registers and QINT registers or more generally anywhere in the manual
* mentioning ITR_INDX, ITR_NONE cannot be used as an index 'n' into any
* register but instead is a special value meaning "don't update" ITR0/1/2.
*/
enum i40e_dyn_idx_t {
I40E_IDX_ITR0 = 0,
I40E_IDX_ITR1 = 1,
I40E_IDX_ITR2 = 2,
I40E_ITR_NONE = 3 /* ITR_NONE must not be used as an index */
};
/* these are indexes into ITRN registers */
#define I40E_RX_ITR I40E_IDX_ITR0
#define I40E_TX_ITR I40E_IDX_ITR1
#define I40E_PE_ITR I40E_IDX_ITR2
/* Supported RSS offloads */
#define I40E_DEFAULT_RSS_HENA ( \
BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_UDP) | \
BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_SCTP) | \
BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_TCP) | \
BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_OTHER) | \
BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV4) | \
BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_UDP) | \
BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_TCP) | \
BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_SCTP) | \
BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_OTHER) | \
BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV6) | \
BIT_ULL(I40E_FILTER_PCTYPE_L2_PAYLOAD))
#define I40E_DEFAULT_RSS_HENA_EXPANDED (I40E_DEFAULT_RSS_HENA | \
BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_TCP_SYN_NO_ACK) | \
BIT_ULL(I40E_FILTER_PCTYPE_NONF_UNICAST_IPV4_UDP) | \
BIT_ULL(I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV4_UDP) | \
BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_TCP_SYN_NO_ACK) | \
BIT_ULL(I40E_FILTER_PCTYPE_NONF_UNICAST_IPV6_UDP) | \
BIT_ULL(I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV6_UDP))
#define i40e_pf_get_default_rss_hena(pf) \
(((pf)->flags & I40E_FLAG_MULTIPLE_TCP_UDP_RSS_PCTYPE) ? \
I40E_DEFAULT_RSS_HENA_EXPANDED : I40E_DEFAULT_RSS_HENA)
/* Supported Rx Buffer Sizes */
#define I40E_RXBUFFER_512 512 /* Used for packet split */
#define I40E_RXBUFFER_2048 2048
#define I40E_RXBUFFER_3072 3072 /* For FCoE MTU of 2158 */
#define I40E_RXBUFFER_4096 4096
#define I40E_RXBUFFER_8192 8192
#define I40E_MAX_RXBUFFER 9728 /* largest size for single descriptor */
/* NOTE: netdev_alloc_skb reserves up to 64 bytes, NET_IP_ALIGN means we
* reserve 2 more, and skb_shared_info adds an additional 384 bytes more,
* this adds up to 512 bytes of extra data meaning the smallest allocation
* we could have is 1K.
* i.e. RXBUFFER_512 --> size-1024 slab
*/
#define I40E_RX_HDR_SIZE I40E_RXBUFFER_512
/* How many Rx Buffers do we bundle into one write to the hardware ? */
#define I40E_RX_BUFFER_WRITE 16 /* Must be power of 2 */
#define I40E_RX_INCREMENT(r, i) \
do { \
(i)++; \
if ((i) == (r)->count) \
i = 0; \
r->next_to_clean = i; \
} while (0)
#define I40E_RX_NEXT_DESC(r, i, n) \
do { \
(i)++; \
if ((i) == (r)->count) \
i = 0; \
(n) = I40E_RX_DESC((r), (i)); \
} while (0)
#define I40E_RX_NEXT_DESC_PREFETCH(r, i, n) \
do { \
I40E_RX_NEXT_DESC((r), (i), (n)); \
prefetch((n)); \
} while (0)
#define i40e_rx_desc i40e_32byte_rx_desc
#define I40E_MAX_BUFFER_TXD 8
#define I40E_MIN_TX_LEN 17
#define I40E_MAX_DATA_PER_TXD 8192
/* Tx Descriptors needed, worst case */
#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), I40E_MAX_DATA_PER_TXD)
#define DESC_NEEDED (MAX_SKB_FRAGS + 4)
#define I40E_MIN_DESC_PENDING 4
#define I40E_TX_FLAGS_HW_VLAN BIT(1)
#define I40E_TX_FLAGS_SW_VLAN BIT(2)
#define I40E_TX_FLAGS_TSO BIT(3)
#define I40E_TX_FLAGS_IPV4 BIT(4)
#define I40E_TX_FLAGS_IPV6 BIT(5)
#define I40E_TX_FLAGS_FCCRC BIT(6)
#define I40E_TX_FLAGS_FSO BIT(7)
#define I40E_TX_FLAGS_TSYN BIT(8)
#define I40E_TX_FLAGS_FD_SB BIT(9)
#define I40E_TX_FLAGS_UDP_TUNNEL BIT(10)
#define I40E_TX_FLAGS_VLAN_MASK 0xffff0000
#define I40E_TX_FLAGS_VLAN_PRIO_MASK 0xe0000000
#define I40E_TX_FLAGS_VLAN_PRIO_SHIFT 29
#define I40E_TX_FLAGS_VLAN_SHIFT 16
struct i40e_tx_buffer {
struct i40e_tx_desc *next_to_watch;
union {
struct sk_buff *skb;
void *raw_buf;
};
unsigned int bytecount;
unsigned short gso_segs;
DEFINE_DMA_UNMAP_ADDR(dma);
DEFINE_DMA_UNMAP_LEN(len);
u32 tx_flags;
};
struct i40e_rx_buffer {
struct sk_buff *skb;
void *hdr_buf;
dma_addr_t dma;
struct page *page;
dma_addr_t page_dma;
unsigned int page_offset;
};
struct i40e_queue_stats {
u64 packets;
u64 bytes;
};
struct i40e_tx_queue_stats {
u64 restart_queue;
u64 tx_busy;
u64 tx_done_old;
u64 tx_linearize;
u64 tx_force_wb;
u64 tx_lost_interrupt;
};
struct i40e_rx_queue_stats {
u64 non_eop_descs;
u64 alloc_page_failed;
u64 alloc_buff_failed;
u64 page_reuse_count;
u64 realloc_count;
};
enum i40e_ring_state_t {
__I40E_TX_FDIR_INIT_DONE,
__I40E_TX_XPS_INIT_DONE,
__I40E_RX_PS_ENABLED,
__I40E_RX_16BYTE_DESC_ENABLED,
};
#define ring_is_ps_enabled(ring) \
test_bit(__I40E_RX_PS_ENABLED, &(ring)->state)
#define set_ring_ps_enabled(ring) \
set_bit(__I40E_RX_PS_ENABLED, &(ring)->state)
#define clear_ring_ps_enabled(ring) \
clear_bit(__I40E_RX_PS_ENABLED, &(ring)->state)
#define ring_is_16byte_desc_enabled(ring) \
test_bit(__I40E_RX_16BYTE_DESC_ENABLED, &(ring)->state)
#define set_ring_16byte_desc_enabled(ring) \
set_bit(__I40E_RX_16BYTE_DESC_ENABLED, &(ring)->state)
#define clear_ring_16byte_desc_enabled(ring) \
clear_bit(__I40E_RX_16BYTE_DESC_ENABLED, &(ring)->state)
/* struct that defines a descriptor ring, associated with a VSI */
struct i40e_ring {
struct i40e_ring *next; /* pointer to next ring in q_vector */
void *desc; /* Descriptor ring memory */
struct device *dev; /* Used for DMA mapping */
struct net_device *netdev; /* netdev ring maps to */
union {
struct i40e_tx_buffer *tx_bi;
struct i40e_rx_buffer *rx_bi;
};
unsigned long state;
u16 queue_index; /* Queue number of ring */
u8 dcb_tc; /* Traffic class of ring */
u8 __iomem *tail;
/* high bit set means dynamic, use accessor routines to read/write.
* hardware only supports 2us resolution for the ITR registers.
* these values always store the USER setting, and must be converted
* before programming to a register.
*/
u16 rx_itr_setting;
u16 tx_itr_setting;
u16 count; /* Number of descriptors */
u16 reg_idx; /* HW register index of the ring */
u16 rx_hdr_len;
u16 rx_buf_len;
u8 dtype;
#define I40E_RX_DTYPE_NO_SPLIT 0
#define I40E_RX_DTYPE_HEADER_SPLIT 1
#define I40E_RX_DTYPE_SPLIT_ALWAYS 2
#define I40E_RX_SPLIT_L2 0x1
#define I40E_RX_SPLIT_IP 0x2
#define I40E_RX_SPLIT_TCP_UDP 0x4
#define I40E_RX_SPLIT_SCTP 0x8
/* used in interrupt processing */
u16 next_to_use;
u16 next_to_clean;
u8 atr_sample_rate;
u8 atr_count;
unsigned long last_rx_timestamp;
bool ring_active; /* is ring online or not */
bool arm_wb; /* do something to arm write back */
u8 packet_stride;
u16 flags;
#define I40E_TXR_FLAGS_WB_ON_ITR BIT(0)
#define I40E_TXR_FLAGS_LAST_XMIT_MORE_SET BIT(2)
/* stats structs */
struct i40e_queue_stats stats;
struct u64_stats_sync syncp;
union {
struct i40e_tx_queue_stats tx_stats;
struct i40e_rx_queue_stats rx_stats;
};
unsigned int size; /* length of descriptor ring in bytes */
dma_addr_t dma; /* physical address of ring */
struct i40e_vsi *vsi; /* Backreference to associated VSI */
struct i40e_q_vector *q_vector; /* Backreference to associated vector */
struct rcu_head rcu; /* to avoid race on free */
} ____cacheline_internodealigned_in_smp;
enum i40e_latency_range {
I40E_LOWEST_LATENCY = 0,
I40E_LOW_LATENCY = 1,
I40E_BULK_LATENCY = 2,
I40E_ULTRA_LATENCY = 3,
};
struct i40e_ring_container {
/* array of pointers to rings */
struct i40e_ring *ring;
unsigned int total_bytes; /* total bytes processed this int */
unsigned int total_packets; /* total packets processed this int */
u16 count;
enum i40e_latency_range latency_range;
u16 itr;
};
/* iterator for handling rings in ring container */
#define i40e_for_each_ring(pos, head) \
for (pos = (head).ring; pos != NULL; pos = pos->next)
bool i40e_alloc_rx_buffers_ps(struct i40e_ring *rxr, u16 cleaned_count);
bool i40e_alloc_rx_buffers_1buf(struct i40e_ring *rxr, u16 cleaned_count);
void i40e_alloc_rx_headers(struct i40e_ring *rxr);
netdev_tx_t i40e_lan_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
void i40e_clean_tx_ring(struct i40e_ring *tx_ring);
void i40e_clean_rx_ring(struct i40e_ring *rx_ring);
int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring);
int i40e_setup_rx_descriptors(struct i40e_ring *rx_ring);
void i40e_free_tx_resources(struct i40e_ring *tx_ring);
void i40e_free_rx_resources(struct i40e_ring *rx_ring);
int i40e_napi_poll(struct napi_struct *napi, int budget);
#ifdef I40E_FCOE
void i40e_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
struct i40e_tx_buffer *first, u32 tx_flags,
const u8 hdr_len, u32 td_cmd, u32 td_offset);
int i40e_tx_prepare_vlan_flags(struct sk_buff *skb,
struct i40e_ring *tx_ring, u32 *flags);
#endif
void i40e_force_wb(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector);
u32 i40e_get_tx_pending(struct i40e_ring *ring, bool in_sw);
int __i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size);
bool __i40e_chk_linearize(struct sk_buff *skb);
/**
* i40e_get_head - Retrieve head from head writeback
* @tx_ring: tx ring to fetch head of
*
* Returns value of Tx ring head based on value stored
* in head write-back location
**/
static inline u32 i40e_get_head(struct i40e_ring *tx_ring)
{
void *head = (struct i40e_tx_desc *)tx_ring->desc + tx_ring->count;
return le32_to_cpu(*(volatile __le32 *)head);
}
/**
* i40e_xmit_descriptor_count - calculate number of Tx descriptors needed
* @skb: send buffer
* @tx_ring: ring to send buffer on
*
* Returns number of data descriptors needed for this skb. Returns 0 to indicate
* there is not enough descriptors available in this ring since we need at least
* one descriptor.
**/
static inline int i40e_xmit_descriptor_count(struct sk_buff *skb)
{
const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
int count = 0, size = skb_headlen(skb);
for (;;) {
count += TXD_USE_COUNT(size);
if (!nr_frags--)
break;
size = skb_frag_size(frag++);
}
return count;
}
/**
* i40e_maybe_stop_tx - 1st level check for Tx stop conditions
* @tx_ring: the ring to be checked
* @size: the size buffer we want to assure is available
*
* Returns 0 if stop is not needed
**/
static inline int i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size)
{
if (likely(I40E_DESC_UNUSED(tx_ring) >= size))
return 0;
return __i40e_maybe_stop_tx(tx_ring, size);
}
/**
* i40e_chk_linearize - Check if there are more than 8 fragments per packet
* @skb: send buffer
* @count: number of buffers used
*
* Note: Our HW can't scatter-gather more than 8 fragments to build
* a packet on the wire and so we need to figure out the cases where we
* need to linearize the skb.
**/
static inline bool i40e_chk_linearize(struct sk_buff *skb, int count)
{
/* Both TSO and single send will work if count is less than 8 */
if (likely(count < I40E_MAX_BUFFER_TXD))
return false;
if (skb_is_gso(skb))
return __i40e_chk_linearize(skb);
/* we can support up to 8 data buffers for a single send */
return count != I40E_MAX_BUFFER_TXD;
}
#endif /* _I40E_TXRX_H_ */