arch/arm/mach-at91/board-yl-9200.c - kernel/msm-4.19 - Gitiles

 /*
  * linux/arch/arm/mach-at91/board-yl-9200.c
  *
  * Adapted from various board files in arch/arm/mach-at91
  *
  * Modifications for YL-9200 platform:
  *  Copyright (C) 2007 S. Birtles
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */

 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/mtd/physmap.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>

 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>

 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>

 #include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
 #include <mach/cpu.h>

 #include "generic.h"


 static void __init yl9200_init_early(void)
 {
 	/* Set cpu type: PQFP */
 	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);

 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);

 	/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
 	at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);

 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

 	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
 	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
 			| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
 			| ATMEL_UART_RI);

 	/* USART0 on ttyS2. (Rx & Tx only to JP3) */
 	at91_register_uart(AT91RM9200_ID_US0, 2, 0);

 	/* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
 	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);

 	/* set serial console to ttyS0 (ie, DBGU) */
 	at91_set_serial_console(0);
 }

 /*
  * LEDs
  */
 static struct gpio_led yl9200_leds[] = {
 	{	/* D2 */
 		.name			= "led2",
 		.gpio			= AT91_PIN_PB17,
 		.active_low		= 1,
 		.default_trigger	= "timer",
 	},
 	{	/* D3 */
 		.name			= "led3",
 		.gpio			= AT91_PIN_PB16,
 		.active_low		= 1,
 		.default_trigger	= "heartbeat",
 	},
 	{	/* D4 */
 		.name			= "led4",
 		.gpio			= AT91_PIN_PB15,
 		.active_low		= 1,
 	},
 	{	/* D5 */
 		.name			= "led5",
 		.gpio			= AT91_PIN_PB8,
 		.active_low		= 1,
 	}
 };

 /*
  * Ethernet
  */
 static struct at91_eth_data __initdata yl9200_eth_data = {
 	.phy_irq_pin		= AT91_PIN_PB28,
 	.is_rmii		= 1,
 };

 /*
  * USB Host
  */
 static struct at91_usbh_data __initdata yl9200_usbh_data = {
 	.ports			= 1,	/* PQFP version of AT91RM9200 */
 };

 /*
  * USB Device
  */
 static struct at91_udc_data __initdata yl9200_udc_data = {
 	.pullup_pin		= AT91_PIN_PC4,
 	.vbus_pin		= AT91_PIN_PC5,
 	.pullup_active_low	= 1,	/* Active Low due to PNP transistor (pg 7) */

 };

 /*
  * MMC
  */
 static struct at91_mmc_data __initdata yl9200_mmc_data = {
 	.det_pin	= AT91_PIN_PB9,
 	// .wp_pin	= ... not connected
 	.wire4		= 1,
 };

 /*
  * NAND Flash
  */
 static struct mtd_partition __initdata yl9200_nand_partition[] = {
 	{
 		.name	= "AT91 NAND partition 1, boot",
 		.offset	= 0,
 		.size	= SZ_256K
 	},
 	{
 		.name	= "AT91 NAND partition 2, kernel",
 		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= (2 * SZ_1M) - SZ_256K
 	},
 	{
 		.name	= "AT91 NAND partition 3, filesystem",
 		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= 14 * SZ_1M
 	},
 	{
 		.name	= "AT91 NAND partition 4, storage",
 		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= SZ_16M
 	},
 	{
 		.name	= "AT91 NAND partition 5, ext-fs",
 		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= SZ_32M
 	}
 };

 static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
 {
 	*num_partitions = ARRAY_SIZE(yl9200_nand_partition);
 	return yl9200_nand_partition;
 }

 static struct atmel_nand_data __initdata yl9200_nand_data = {
 	.ale		= 6,
 	.cle		= 7,
 	// .det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC14,	/* R/!B (Sheet10) */
 	.enable_pin	= AT91_PIN_PC15,	/* !CE  (Sheet10) */
 	.partition_info	= nand_partitions,
 };

 /*
  * NOR Flash
  */
 #define YL9200_FLASH_BASE	AT91_CHIPSELECT_0
 #define YL9200_FLASH_SIZE	SZ_16M

 static struct mtd_partition yl9200_flash_partitions[] = {
 	{
 		.name		= "Bootloader",
 		.offset		= 0,
 		.size		= SZ_256K,
 		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
 	},
 	{
 		.name		= "Kernel",
 		.offset		= MTDPART_OFS_NXTBLK,
 		.size		= (2 * SZ_1M) - SZ_256K
 	},
 	{
 		.name		= "Filesystem",
 		.offset		= MTDPART_OFS_NXTBLK,
 		.size		= MTDPART_SIZ_FULL
 	}
 };

 static struct physmap_flash_data yl9200_flash_data = {
 	.width		= 2,
 	.parts		= yl9200_flash_partitions,
 	.nr_parts	= ARRAY_SIZE(yl9200_flash_partitions),
 };

 static struct resource yl9200_flash_resources[] = {
 	{
 		.start	= YL9200_FLASH_BASE,
 		.end	= YL9200_FLASH_BASE + YL9200_FLASH_SIZE - 1,
 		.flags	= IORESOURCE_MEM,
 	}
 };

 static struct platform_device yl9200_flash = {
 	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 				.platform_data	= &yl9200_flash_data,
 			},
 	.resource	= yl9200_flash_resources,
 	.num_resources	= ARRAY_SIZE(yl9200_flash_resources),
 };

 /*
  * I2C (TWI)
  */
 static struct i2c_board_info __initdata yl9200_i2c_devices[] = {
 	{	/* EEPROM */
 		I2C_BOARD_INFO("24c128", 0x50),
 	}
 };

 /*
  * GPIO Buttons
 */
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button yl9200_buttons[] = {
 	{
 		.gpio		= AT91_PIN_PA24,
 		.code		= BTN_2,
 		.desc		= "SW2",
 		.active_low	= 1,
 		.wakeup		= 1,
 	},
 	{
 		.gpio		= AT91_PIN_PB1,
 		.code		= BTN_3,
 		.desc		= "SW3",
 		.active_low	= 1,
 		.wakeup		= 1,
 	},
 	{
 		.gpio		= AT91_PIN_PB2,
 		.code		= BTN_4,
 		.desc		= "SW4",
 		.active_low	= 1,
 		.wakeup		= 1,
 	},
 	{
 		.gpio		= AT91_PIN_PB6,
 		.code		= BTN_5,
 		.desc		= "SW5",
 		.active_low	= 1,
 		.wakeup		= 1,
 	}
 };

 static struct gpio_keys_platform_data yl9200_button_data = {
 	.buttons	= yl9200_buttons,
 	.nbuttons	= ARRAY_SIZE(yl9200_buttons),
 };

 static struct platform_device yl9200_button_device = {
 	.name		= "gpio-keys",
 	.id		= -1,
 	.num_resources	= 0,
 	.dev		= {
 		.platform_data	= &yl9200_button_data,
 	}
 };

 static void __init yl9200_add_device_buttons(void)
 {
 	at91_set_gpio_input(AT91_PIN_PA24, 1);	/* SW2 */
 	at91_set_deglitch(AT91_PIN_PA24, 1);
 	at91_set_gpio_input(AT91_PIN_PB1, 1);	/* SW3 */
 	at91_set_deglitch(AT91_PIN_PB1, 1);
 	at91_set_gpio_input(AT91_PIN_PB2, 1);	/* SW4 */
 	at91_set_deglitch(AT91_PIN_PB2, 1);
 	at91_set_gpio_input(AT91_PIN_PB6, 1);	/* SW5 */
 	at91_set_deglitch(AT91_PIN_PB6, 1);

 	/* Enable buttons (Sheet 5) */
 	at91_set_gpio_output(AT91_PIN_PB7, 1);

 	platform_device_register(&yl9200_button_device);
 }
 #else
 static void __init yl9200_add_device_buttons(void) {}
 #endif

 /*
  * Touchscreen
  */
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 static int ads7843_pendown_state(void)
 {
 	return !at91_get_gpio_value(AT91_PIN_PB11);	/* Touchscreen PENIRQ */
 }

 static struct ads7846_platform_data ads_info = {
 	.model			= 7843,
 	.x_min			= 150,
 	.x_max			= 3830,
 	.y_min			= 190,
 	.y_max			= 3830,
 	.vref_delay_usecs	= 100,

 	/* For a 8" touch-screen */
 	// .x_plate_ohms		= 603,
 	// .y_plate_ohms		= 332,

 	/* For a 10.4" touch-screen */
 	// .x_plate_ohms		= 611,
 	// .y_plate_ohms		= 325,

 	.x_plate_ohms		= 576,
 	.y_plate_ohms		= 366,

 	.pressure_max		= 15000, /* generally nonsense on the 7843 */
 	.debounce_max		= 1,
 	.debounce_rep		= 0,
 	.debounce_tol		= (~0),
 	.get_pendown_state	= ads7843_pendown_state,
 };

 static void __init yl9200_add_device_ts(void)
 {
 	at91_set_gpio_input(AT91_PIN_PB11, 1);	/* Touchscreen interrupt pin */
 	at91_set_gpio_input(AT91_PIN_PB10, 1);	/* Touchscreen BUSY signal - not used! */
 }
 #else
 static void __init yl9200_add_device_ts(void) {}
 #endif

 /*
  * SPI devices
  */
 static struct spi_board_info yl9200_spi_devices[] = {
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 	{	/* Touchscreen */
 		.modalias	= "ads7846",
 		.chip_select	= 0,
 		.max_speed_hz	= 5000 * 26,
 		.platform_data	= &ads_info,
 		.irq		= AT91_PIN_PB11,
 	},
 #endif
 	{	/* CAN */
 		.modalias	= "mcp2510",
 		.chip_select	= 1,
 		.max_speed_hz	= 25000 * 26,
 		.irq		= AT91_PIN_PC0,
 	}
 };

 /*
  * LCD / VGA
  *
  * EPSON S1D13806 FB (discontinued chip)
  * EPSON S1D13506 FB
  */
 #if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
 #include <video/s1d13xxxfb.h>


 static void __init yl9200_init_video(void)
 {
 	/* NWAIT Signal */
 	at91_set_A_periph(AT91_PIN_PC6, 0);

 	/* Initialization of the Static Memory Controller for Chip Select 2 */
 	at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16		/* 16 bit */
 			| AT91_SMC_WSEN | AT91_SMC_NWS_(0x4)	/* wait states */
 			| AT91_SMC_TDF_(0x100)			/* float time */
 	);
 }

 static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
 {
 	{S1DREG_MISC,			0x00},	/* Miscellaneous Register*/
 	{S1DREG_COM_DISP_MODE,		0x01},	/* Display Mode Register, LCD only*/
 	{S1DREG_GPIO_CNF0,		0x00},	/* General IO Pins Configuration Register*/
 	{S1DREG_GPIO_CTL0,		0x00},	/* General IO Pins Control Register*/
 	{S1DREG_CLK_CNF,		0x11},	/* Memory Clock Configuration Register*/
 	{S1DREG_LCD_CLK_CNF,		0x10},	/* LCD Pixel Clock Configuration Register*/
 	{S1DREG_CRT_CLK_CNF,		0x12},	/* CRT/TV Pixel Clock Configuration Register*/
 	{S1DREG_MPLUG_CLK_CNF,		0x01},	/* MediaPlug Clock Configuration Register*/
 	{S1DREG_CPU2MEM_WST_SEL,	0x02},	/* CPU To Memory Wait State Select Register*/
 	{S1DREG_MEM_CNF,		0x00},	/* Memory Configuration Register*/
 	{S1DREG_SDRAM_REF_RATE,		0x04},	/* DRAM Refresh Rate Register, MCLK source*/
 	{S1DREG_SDRAM_TC0,		0x12},	/* DRAM Timings Control Register 0*/
 	{S1DREG_SDRAM_TC1,		0x02},	/* DRAM Timings Control Register 1*/
 	{S1DREG_PANEL_TYPE,		0x25},	/* Panel Type Register*/
 	{S1DREG_MOD_RATE,		0x00},	/* MOD Rate Register*/
 	{S1DREG_LCD_DISP_HWIDTH,	0x4F},	/* LCD Horizontal Display Width Register*/
 	{S1DREG_LCD_NDISP_HPER,		0x13},	/* LCD Horizontal Non-Display Period Register*/
 	{S1DREG_TFT_FPLINE_START,	0x01},	/* TFT FPLINE Start Position Register*/
 	{S1DREG_TFT_FPLINE_PWIDTH,	0x0c},	/* TFT FPLINE Pulse Width Register*/
 	{S1DREG_LCD_DISP_VHEIGHT0,	0xDF},	/* LCD Vertical Display Height Register 0*/
 	{S1DREG_LCD_DISP_VHEIGHT1,	0x01},	/* LCD Vertical Display Height Register 1*/
 	{S1DREG_LCD_NDISP_VPER,		0x2c},	/* LCD Vertical Non-Display Period Register*/
 	{S1DREG_TFT_FPFRAME_START,	0x0a},	/* TFT FPFRAME Start Position Register*/
 	{S1DREG_TFT_FPFRAME_PWIDTH,	0x02},	/* TFT FPFRAME Pulse Width Register*/
 	{S1DREG_LCD_DISP_MODE,		0x05},	/* LCD Display Mode Register*/
 	{S1DREG_LCD_MISC,		0x01},	/* LCD Miscellaneous Register*/
 	{S1DREG_LCD_DISP_START0,	0x00},	/* LCD Display Start Address Register 0*/
 	{S1DREG_LCD_DISP_START1,	0x00},	/* LCD Display Start Address Register 1*/
 	{S1DREG_LCD_DISP_START2,	0x00},	/* LCD Display Start Address Register 2*/
 	{S1DREG_LCD_MEM_OFF0,		0x80},	/* LCD Memory Address Offset Register 0*/
 	{S1DREG_LCD_MEM_OFF1,		0x02},	/* LCD Memory Address Offset Register 1*/
 	{S1DREG_LCD_PIX_PAN,		0x03},	/* LCD Pixel Panning Register*/
 	{S1DREG_LCD_DISP_FIFO_HTC,	0x00},	/* LCD Display FIFO High Threshold Control Register*/
 	{S1DREG_LCD_DISP_FIFO_LTC,	0x00},	/* LCD Display FIFO Low Threshold Control Register*/
 	{S1DREG_CRT_DISP_HWIDTH,	0x4F},	/* CRT/TV Horizontal Display Width Register*/
 	{S1DREG_CRT_NDISP_HPER,		0x13},	/* CRT/TV Horizontal Non-Display Period Register*/
 	{S1DREG_CRT_HRTC_START,		0x01},	/* CRT/TV HRTC Start Position Register*/
 	{S1DREG_CRT_HRTC_PWIDTH,	0x0B},	/* CRT/TV HRTC Pulse Width Register*/
 	{S1DREG_CRT_DISP_VHEIGHT0,	0xDF},	/* CRT/TV Vertical Display Height Register 0*/
 	{S1DREG_CRT_DISP_VHEIGHT1,	0x01},	/* CRT/TV Vertical Display Height Register 1*/
 	{S1DREG_CRT_NDISP_VPER,		0x2B},	/* CRT/TV Vertical Non-Display Period Register*/
 	{S1DREG_CRT_VRTC_START,		0x09},	/* CRT/TV VRTC Start Position Register*/
 	{S1DREG_CRT_VRTC_PWIDTH,	0x01},	/* CRT/TV VRTC Pulse Width Register*/
 	{S1DREG_TV_OUT_CTL,		0x18},	/* TV Output Control Register */
 	{S1DREG_CRT_DISP_MODE,		0x05},	/* CRT/TV Display Mode Register, 16BPP*/
 	{S1DREG_CRT_DISP_START0,	0x00},	/* CRT/TV Display Start Address Register 0*/
 	{S1DREG_CRT_DISP_START1,	0x00},	/* CRT/TV Display Start Address Register 1*/
 	{S1DREG_CRT_DISP_START2,	0x00},	/* CRT/TV Display Start Address Register 2*/
 	{S1DREG_CRT_MEM_OFF0,		0x80},	/* CRT/TV Memory Address Offset Register 0*/
 	{S1DREG_CRT_MEM_OFF1,		0x02},	/* CRT/TV Memory Address Offset Register 1*/
 	{S1DREG_CRT_PIX_PAN,		0x00},	/* CRT/TV Pixel Panning Register*/
 	{S1DREG_CRT_DISP_FIFO_HTC,	0x00},	/* CRT/TV Display FIFO High Threshold Control Register*/
 	{S1DREG_CRT_DISP_FIFO_LTC,	0x00},	/* CRT/TV Display FIFO Low Threshold Control Register*/
 	{S1DREG_LCD_CUR_CTL,		0x00},	/* LCD Ink/Cursor Control Register*/
 	{S1DREG_LCD_CUR_START,		0x01},	/* LCD Ink/Cursor Start Address Register*/
 	{S1DREG_LCD_CUR_XPOS0,		0x00},	/* LCD Cursor X Position Register 0*/
 	{S1DREG_LCD_CUR_XPOS1,		0x00},	/* LCD Cursor X Position Register 1*/
 	{S1DREG_LCD_CUR_YPOS0,		0x00},	/* LCD Cursor Y Position Register 0*/
 	{S1DREG_LCD_CUR_YPOS1,		0x00},	/* LCD Cursor Y Position Register 1*/
 	{S1DREG_LCD_CUR_BCTL0,		0x00},	/* LCD Ink/Cursor Blue Color 0 Register*/
 	{S1DREG_LCD_CUR_GCTL0,		0x00},	/* LCD Ink/Cursor Green Color 0 Register*/
 	{S1DREG_LCD_CUR_RCTL0,		0x00},	/* LCD Ink/Cursor Red Color 0 Register*/
 	{S1DREG_LCD_CUR_BCTL1,		0x1F},	/* LCD Ink/Cursor Blue Color 1 Register*/
 	{S1DREG_LCD_CUR_GCTL1,		0x3F},	/* LCD Ink/Cursor Green Color 1 Register*/
 	{S1DREG_LCD_CUR_RCTL1,		0x1F},	/* LCD Ink/Cursor Red Color 1 Register*/
 	{S1DREG_LCD_CUR_FIFO_HTC,	0x00},	/* LCD Ink/Cursor FIFO Threshold Register*/
 	{S1DREG_CRT_CUR_CTL,		0x00},	/* CRT/TV Ink/Cursor Control Register*/
 	{S1DREG_CRT_CUR_START,		0x01},	/* CRT/TV Ink/Cursor Start Address Register*/
 	{S1DREG_CRT_CUR_XPOS0,		0x00},	/* CRT/TV Cursor X Position Register 0*/
 	{S1DREG_CRT_CUR_XPOS1,		0x00},	/* CRT/TV Cursor X Position Register 1*/
 	{S1DREG_CRT_CUR_YPOS0,		0x00},	/* CRT/TV Cursor Y Position Register 0*/
 	{S1DREG_CRT_CUR_YPOS1,		0x00},	/* CRT/TV Cursor Y Position Register 1*/
 	{S1DREG_CRT_CUR_BCTL0,		0x00},	/* CRT/TV Ink/Cursor Blue Color 0 Register*/
 	{S1DREG_CRT_CUR_GCTL0,		0x00},	/* CRT/TV Ink/Cursor Green Color 0 Register*/
 	{S1DREG_CRT_CUR_RCTL0,		0x00},	/* CRT/TV Ink/Cursor Red Color 0 Register*/
 	{S1DREG_CRT_CUR_BCTL1,		0x1F},	/* CRT/TV Ink/Cursor Blue Color 1 Register*/
 	{S1DREG_CRT_CUR_GCTL1,		0x3F},	/* CRT/TV Ink/Cursor Green Color 1 Register*/
 	{S1DREG_CRT_CUR_RCTL1,		0x1F},	/* CRT/TV Ink/Cursor Red Color 1 Register*/
 	{S1DREG_CRT_CUR_FIFO_HTC,	0x00},	/* CRT/TV Ink/Cursor FIFO Threshold Register*/
 	{S1DREG_BBLT_CTL0,		0x00},	/* BitBlt Control Register 0*/
 	{S1DREG_BBLT_CTL1,		0x01},	/* BitBlt Control Register 1*/
 	{S1DREG_BBLT_CC_EXP,		0x00},	/* BitBlt ROP Code/Color Expansion Register*/
 	{S1DREG_BBLT_OP,		0x00},	/* BitBlt Operation Register*/
 	{S1DREG_BBLT_SRC_START0,	0x00},	/* BitBlt Source Start Address Register 0*/
 	{S1DREG_BBLT_SRC_START1,	0x00},	/* BitBlt Source Start Address Register 1*/
 	{S1DREG_BBLT_SRC_START2,	0x00},	/* BitBlt Source Start Address Register 2*/
 	{S1DREG_BBLT_DST_START0,	0x00},	/* BitBlt Destination Start Address Register 0*/
 	{S1DREG_BBLT_DST_START1,	0x00},	/* BitBlt Destination Start Address Register 1*/
 	{S1DREG_BBLT_DST_START2,	0x00},	/* BitBlt Destination Start Address Register 2*/
 	{S1DREG_BBLT_MEM_OFF0,		0x00},	/* BitBlt Memory Address Offset Register 0*/
 	{S1DREG_BBLT_MEM_OFF1,		0x00},	/* BitBlt Memory Address Offset Register 1*/
 	{S1DREG_BBLT_WIDTH0,		0x00},	/* BitBlt Width Register 0*/
 	{S1DREG_BBLT_WIDTH1,		0x00},	/* BitBlt Width Register 1*/
 	{S1DREG_BBLT_HEIGHT0,		0x00},	/* BitBlt Height Register 0*/
 	{S1DREG_BBLT_HEIGHT1,		0x00},	/* BitBlt Height Register 1*/
 	{S1DREG_BBLT_BGC0,		0x00},	/* BitBlt Background Color Register 0*/
 	{S1DREG_BBLT_BGC1,		0x00},	/* BitBlt Background Color Register 1*/
 	{S1DREG_BBLT_FGC0,		0x00},	/* BitBlt Foreground Color Register 0*/
 	{S1DREG_BBLT_FGC1,		0x00},	/* BitBlt Foreground Color Register 1*/
 	{S1DREG_LKUP_MODE,		0x00},	/* Look-Up Table Mode Register*/
 	{S1DREG_LKUP_ADDR,		0x00},	/* Look-Up Table Address Register*/
 	{S1DREG_PS_CNF,			0x00},	/* Power Save Configuration Register*/
 	{S1DREG_PS_STATUS,		0x00},	/* Power Save Status Register*/
 	{S1DREG_CPU2MEM_WDOGT,		0x00},	/* CPU-to-Memory Access Watchdog Timer Register*/
 	{S1DREG_COM_DISP_MODE,		0x01},	/* Display Mode Register, LCD only*/
 };

 static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
 	.initregs		= yl9200_s1dfb_initregs,
 	.initregssize		= ARRAY_SIZE(yl9200_s1dfb_initregs),
 	.platform_init_video	= yl9200_init_video,
 };

 #define YL9200_FB_REG_BASE	AT91_CHIPSELECT_7
 #define YL9200_FB_VMEM_BASE	YL9200_FB_REG_BASE + SZ_2M
 #define YL9200_FB_VMEM_SIZE	SZ_2M

 static struct resource yl9200_s1dfb_resource[] = {
 	[0] = {	/* video mem */
 		.name	= "s1d13xxxfb memory",
 		.start	= YL9200_FB_VMEM_BASE,
 		.end	= YL9200_FB_VMEM_BASE + YL9200_FB_VMEM_SIZE -1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {	/* video registers */
 		.name	= "s1d13xxxfb registers",
 		.start	= YL9200_FB_REG_BASE,
 		.end	= YL9200_FB_REG_BASE + SZ_512 -1,
 		.flags	= IORESOURCE_MEM,
 	},
 };

 static u64 s1dfb_dmamask = DMA_BIT_MASK(32);

 static struct platform_device yl9200_s1dfb_device = {
 	.name		= "s1d13806fb",
 	.id		= -1,
 	.dev	= {
 		.dma_mask		= &s1dfb_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 		.platform_data		= &yl9200_s1dfb_pdata,
 	},
 	.resource	= yl9200_s1dfb_resource,
 	.num_resources	= ARRAY_SIZE(yl9200_s1dfb_resource),
 };

 void __init yl9200_add_device_video(void)
 {
 	platform_device_register(&yl9200_s1dfb_device);
 }
 #else
 void __init yl9200_add_device_video(void) {}
 #endif


 static void __init yl9200_board_init(void)
 {
 	/* Serial */
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&yl9200_eth_data);
 	/* USB Host */
 	at91_add_device_usbh(&yl9200_usbh_data);
 	/* USB Device */
 	at91_add_device_udc(&yl9200_udc_data);
 	/* I2C */
 	at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
 	/* MMC */
 	at91_add_device_mmc(0, &yl9200_mmc_data);
 	/* NAND */
 	at91_add_device_nand(&yl9200_nand_data);
 	/* NOR Flash */
 	platform_device_register(&yl9200_flash);
 #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
 	/* SPI */
 	at91_add_device_spi(yl9200_spi_devices, ARRAY_SIZE(yl9200_spi_devices));
 	/* Touchscreen */
 	yl9200_add_device_ts();
 #endif
 	/* LEDs. */
 	at91_gpio_leds(yl9200_leds, ARRAY_SIZE(yl9200_leds));
 	/* Push Buttons */
 	yl9200_add_device_buttons();
 	/* VGA */
 	yl9200_add_device_video();
 }

 MACHINE_START(YL9200, "uCdragon YL-9200")
 	/* Maintainer: S.Birtles */
 	.timer		= &at91rm9200_timer,
 	.map_io		= at91_map_io,
 	.init_early	= yl9200_init_early,
 	.init_irq	= at91_init_irq_default,
 	.init_machine	= yl9200_board_init,
 MACHINE_END
	/*
	* linux/arch/arm/mach-at91/board-yl-9200.c
	*
	* Adapted from various board files in arch/arm/mach-at91
	*
	* Modifications for YL-9200 platform:
	* Copyright (C) 2007 S. Birtles
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*/

	#include <linux/types.h>
	#include <linux/init.h>
	#include <linux/mm.h>
	#include <linux/module.h>
	#include <linux/dma-mapping.h>
	#include <linux/platform_device.h>
	#include <linux/spi/spi.h>
	#include <linux/spi/ads7846.h>
	#include <linux/mtd/physmap.h>
	#include <linux/gpio_keys.h>
	#include <linux/input.h>

	#include <asm/setup.h>
	#include <asm/mach-types.h>
	#include <asm/irq.h>

	#include <asm/mach/arch.h>
	#include <asm/mach/map.h>
	#include <asm/mach/irq.h>

	#include <mach/hardware.h>
	#include <mach/board.h>
	#include <mach/gpio.h>
	#include <mach/at91rm9200_mc.h>
	#include <mach/cpu.h>

	#include "generic.h"


	static void __init yl9200_init_early(void)
	{
	/* Set cpu type: PQFP */
	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);

	/* Initialize processor: 18.432 MHz crystal */
	at91_initialize(18432000);

	/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
	at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);

	/* DBGU on ttyS0. (Rx & Tx only) */
	at91_register_uart(0, 0, 0);

	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS \| ATMEL_UART_RTS
	\| ATMEL_UART_DTR \| ATMEL_UART_DSR \| ATMEL_UART_DCD
	\| ATMEL_UART_RI);

	/* USART0 on ttyS2. (Rx & Tx only to JP3) */
	at91_register_uart(AT91RM9200_ID_US0, 2, 0);

	/* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);

	/* set serial console to ttyS0 (ie, DBGU) */
	at91_set_serial_console(0);
	}

	/*
	* LEDs
	*/
	static struct gpio_led yl9200_leds[] = {
	{ /* D2 */
	.name = "led2",
	.gpio = AT91_PIN_PB17,
	.active_low = 1,
	.default_trigger = "timer",
	},
	{ /* D3 */
	.name = "led3",
	.gpio = AT91_PIN_PB16,
	.active_low = 1,
	.default_trigger = "heartbeat",
	},
	{ /* D4 */
	.name = "led4",
	.gpio = AT91_PIN_PB15,
	.active_low = 1,
	},
	{ /* D5 */
	.name = "led5",
	.gpio = AT91_PIN_PB8,
	.active_low = 1,
	}
	};

	/*
	* Ethernet
	*/
	static struct at91_eth_data __initdata yl9200_eth_data = {
	.phy_irq_pin = AT91_PIN_PB28,
	.is_rmii = 1,
	};

	/*
	* USB Host
	*/
	static struct at91_usbh_data __initdata yl9200_usbh_data = {
	.ports = 1, /* PQFP version of AT91RM9200 */
	};

	/*
	* USB Device
	*/
	static struct at91_udc_data __initdata yl9200_udc_data = {
	.pullup_pin = AT91_PIN_PC4,
	.vbus_pin = AT91_PIN_PC5,
	.pullup_active_low = 1, /* Active Low due to PNP transistor (pg 7) */

	};

	/*
	* MMC
	*/
	static struct at91_mmc_data __initdata yl9200_mmc_data = {
	.det_pin = AT91_PIN_PB9,
	// .wp_pin = ... not connected
	.wire4 = 1,
	};

	/*
	* NAND Flash
	*/
	static struct mtd_partition __initdata yl9200_nand_partition[] = {
	{
	.name = "AT91 NAND partition 1, boot",
	.offset = 0,
	.size = SZ_256K
	},
	{
	.name = "AT91 NAND partition 2, kernel",
	.offset = MTDPART_OFS_NXTBLK,
	.size = (2 * SZ_1M) - SZ_256K
	},
	{
	.name = "AT91 NAND partition 3, filesystem",
	.offset = MTDPART_OFS_NXTBLK,
	.size = 14 * SZ_1M
	},
	{
	.name = "AT91 NAND partition 4, storage",
	.offset = MTDPART_OFS_NXTBLK,
	.size = SZ_16M
	},
	{
	.name = "AT91 NAND partition 5, ext-fs",
	.offset = MTDPART_OFS_NXTBLK,
	.size = SZ_32M
	}
	};

	static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
	{
	*num_partitions = ARRAY_SIZE(yl9200_nand_partition);
	return yl9200_nand_partition;
	}

	static struct atmel_nand_data __initdata yl9200_nand_data = {
	.ale = 6,
	.cle = 7,
	// .det_pin = ... not connected
	.rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */
	.enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */
	.partition_info = nand_partitions,
	};

	/*
	* NOR Flash
	*/
	#define YL9200_FLASH_BASE AT91_CHIPSELECT_0
	#define YL9200_FLASH_SIZE SZ_16M

	static struct mtd_partition yl9200_flash_partitions[] = {
	{
	.name = "Bootloader",
	.offset = 0,
	.size = SZ_256K,
	.mask_flags = MTD_WRITEABLE, /* force read-only */
	},
	{
	.name = "Kernel",
	.offset = MTDPART_OFS_NXTBLK,
	.size = (2 * SZ_1M) - SZ_256K
	},
	{
	.name = "Filesystem",
	.offset = MTDPART_OFS_NXTBLK,
	.size = MTDPART_SIZ_FULL
	}
	};

	static struct physmap_flash_data yl9200_flash_data = {
	.width = 2,
	.parts = yl9200_flash_partitions,
	.nr_parts = ARRAY_SIZE(yl9200_flash_partitions),
	};

	static struct resource yl9200_flash_resources[] = {
	{
	.start = YL9200_FLASH_BASE,
	.end = YL9200_FLASH_BASE + YL9200_FLASH_SIZE - 1,
	.flags = IORESOURCE_MEM,
	}
	};

	static struct platform_device yl9200_flash = {
	.name = "physmap-flash",
	.id = 0,
	.dev = {
	.platform_data = &yl9200_flash_data,
	},
	.resource = yl9200_flash_resources,
	.num_resources = ARRAY_SIZE(yl9200_flash_resources),
	};

	/*
	* I2C (TWI)
	*/
	static struct i2c_board_info __initdata yl9200_i2c_devices[] = {
	{ /* EEPROM */
	I2C_BOARD_INFO("24c128", 0x50),
	}
	};

	/*
	* GPIO Buttons
	*/
	#if defined(CONFIG_KEYBOARD_GPIO) \|\| defined(CONFIG_KEYBOARD_GPIO_MODULE)
	static struct gpio_keys_button yl9200_buttons[] = {
	{
	.gpio = AT91_PIN_PA24,
	.code = BTN_2,
	.desc = "SW2",
	.active_low = 1,
	.wakeup = 1,
	},
	{
	.gpio = AT91_PIN_PB1,
	.code = BTN_3,
	.desc = "SW3",
	.active_low = 1,
	.wakeup = 1,
	},
	{
	.gpio = AT91_PIN_PB2,
	.code = BTN_4,
	.desc = "SW4",
	.active_low = 1,
	.wakeup = 1,
	},
	{
	.gpio = AT91_PIN_PB6,
	.code = BTN_5,
	.desc = "SW5",
	.active_low = 1,
	.wakeup = 1,
	}
	};

	static struct gpio_keys_platform_data yl9200_button_data = {
	.buttons = yl9200_buttons,
	.nbuttons = ARRAY_SIZE(yl9200_buttons),
	};

	static struct platform_device yl9200_button_device = {
	.name = "gpio-keys",
	.id = -1,
	.num_resources = 0,
	.dev = {
	.platform_data = &yl9200_button_data,
	}
	};

	static void __init yl9200_add_device_buttons(void)
	{
	at91_set_gpio_input(AT91_PIN_PA24, 1); /* SW2 */
	at91_set_deglitch(AT91_PIN_PA24, 1);
	at91_set_gpio_input(AT91_PIN_PB1, 1); /* SW3 */
	at91_set_deglitch(AT91_PIN_PB1, 1);
	at91_set_gpio_input(AT91_PIN_PB2, 1); /* SW4 */
	at91_set_deglitch(AT91_PIN_PB2, 1);
	at91_set_gpio_input(AT91_PIN_PB6, 1); /* SW5 */
	at91_set_deglitch(AT91_PIN_PB6, 1);

	/* Enable buttons (Sheet 5) */
	at91_set_gpio_output(AT91_PIN_PB7, 1);

	platform_device_register(&yl9200_button_device);
	}
	#else
	static void __init yl9200_add_device_buttons(void) {}
	#endif

	/*
	* Touchscreen
	*/
	#if defined(CONFIG_TOUCHSCREEN_ADS7846) \|\| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
	static int ads7843_pendown_state(void)
	{
	return !at91_get_gpio_value(AT91_PIN_PB11); /* Touchscreen PENIRQ */
	}

	static struct ads7846_platform_data ads_info = {
	.model = 7843,
	.x_min = 150,
	.x_max = 3830,
	.y_min = 190,
	.y_max = 3830,
	.vref_delay_usecs = 100,

	/* For a 8" touch-screen */
	// .x_plate_ohms = 603,
	// .y_plate_ohms = 332,

	/* For a 10.4" touch-screen */
	// .x_plate_ohms = 611,
	// .y_plate_ohms = 325,

	.x_plate_ohms = 576,
	.y_plate_ohms = 366,

	.pressure_max = 15000, /* generally nonsense on the 7843 */
	.debounce_max = 1,
	.debounce_rep = 0,
	.debounce_tol = (~0),
	.get_pendown_state = ads7843_pendown_state,
	};

	static void __init yl9200_add_device_ts(void)
	{
	at91_set_gpio_input(AT91_PIN_PB11, 1); /* Touchscreen interrupt pin */
	at91_set_gpio_input(AT91_PIN_PB10, 1); /* Touchscreen BUSY signal - not used! */
	}
	#else
	static void __init yl9200_add_device_ts(void) {}
	#endif

	/*
	* SPI devices
	*/
	static struct spi_board_info yl9200_spi_devices[] = {
	#if defined(CONFIG_TOUCHSCREEN_ADS7846) \|\| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
	{ /* Touchscreen */
	.modalias = "ads7846",
	.chip_select = 0,
	.max_speed_hz = 5000 * 26,
	.platform_data = &ads_info,
	.irq = AT91_PIN_PB11,
	},
	#endif
	{ /* CAN */
	.modalias = "mcp2510",
	.chip_select = 1,
	.max_speed_hz = 25000 * 26,
	.irq = AT91_PIN_PC0,
	}
	};

	/*
	* LCD / VGA
	*
	* EPSON S1D13806 FB (discontinued chip)
	* EPSON S1D13506 FB
	*/
	#if defined(CONFIG_FB_S1D13XXX) \|\| defined(CONFIG_FB_S1D13XXX_MODULE)
	#include <video/s1d13xxxfb.h>


	static void __init yl9200_init_video(void)
	{
	/* NWAIT Signal */
	at91_set_A_periph(AT91_PIN_PC6, 0);

	/* Initialization of the Static Memory Controller for Chip Select 2 */
	at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
	\| AT91_SMC_WSEN \| AT91_SMC_NWS_(0x4) /* wait states */
	\| AT91_SMC_TDF_(0x100) /* float time */
	);
	}

	static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
	{
	{S1DREG_MISC, 0x00}, /* Miscellaneous Register*/
	{S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
	{S1DREG_GPIO_CNF0, 0x00}, /* General IO Pins Configuration Register*/
	{S1DREG_GPIO_CTL0, 0x00}, /* General IO Pins Control Register*/
	{S1DREG_CLK_CNF, 0x11}, /* Memory Clock Configuration Register*/
	{S1DREG_LCD_CLK_CNF, 0x10}, /* LCD Pixel Clock Configuration Register*/
	{S1DREG_CRT_CLK_CNF, 0x12}, /* CRT/TV Pixel Clock Configuration Register*/
	{S1DREG_MPLUG_CLK_CNF, 0x01}, /* MediaPlug Clock Configuration Register*/
	{S1DREG_CPU2MEM_WST_SEL, 0x02}, /* CPU To Memory Wait State Select Register*/
	{S1DREG_MEM_CNF, 0x00}, /* Memory Configuration Register*/
	{S1DREG_SDRAM_REF_RATE, 0x04}, /* DRAM Refresh Rate Register, MCLK source*/
	{S1DREG_SDRAM_TC0, 0x12}, /* DRAM Timings Control Register 0*/
	{S1DREG_SDRAM_TC1, 0x02}, /* DRAM Timings Control Register 1*/
	{S1DREG_PANEL_TYPE, 0x25}, /* Panel Type Register*/
	{S1DREG_MOD_RATE, 0x00}, /* MOD Rate Register*/
	{S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* LCD Horizontal Display Width Register*/
	{S1DREG_LCD_NDISP_HPER, 0x13}, /* LCD Horizontal Non-Display Period Register*/
	{S1DREG_TFT_FPLINE_START, 0x01}, /* TFT FPLINE Start Position Register*/
	{S1DREG_TFT_FPLINE_PWIDTH, 0x0c}, /* TFT FPLINE Pulse Width Register*/
	{S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, /* LCD Vertical Display Height Register 0*/
	{S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* LCD Vertical Display Height Register 1*/
	{S1DREG_LCD_NDISP_VPER, 0x2c}, /* LCD Vertical Non-Display Period Register*/
	{S1DREG_TFT_FPFRAME_START, 0x0a}, /* TFT FPFRAME Start Position Register*/
	{S1DREG_TFT_FPFRAME_PWIDTH, 0x02}, /* TFT FPFRAME Pulse Width Register*/
	{S1DREG_LCD_DISP_MODE, 0x05}, /* LCD Display Mode Register*/
	{S1DREG_LCD_MISC, 0x01}, /* LCD Miscellaneous Register*/
	{S1DREG_LCD_DISP_START0, 0x00}, /* LCD Display Start Address Register 0*/
	{S1DREG_LCD_DISP_START1, 0x00}, /* LCD Display Start Address Register 1*/
	{S1DREG_LCD_DISP_START2, 0x00}, /* LCD Display Start Address Register 2*/
	{S1DREG_LCD_MEM_OFF0, 0x80}, /* LCD Memory Address Offset Register 0*/
	{S1DREG_LCD_MEM_OFF1, 0x02}, /* LCD Memory Address Offset Register 1*/
	{S1DREG_LCD_PIX_PAN, 0x03}, /* LCD Pixel Panning Register*/
	{S1DREG_LCD_DISP_FIFO_HTC, 0x00}, /* LCD Display FIFO High Threshold Control Register*/
	{S1DREG_LCD_DISP_FIFO_LTC, 0x00}, /* LCD Display FIFO Low Threshold Control Register*/
	{S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* CRT/TV Horizontal Display Width Register*/
	{S1DREG_CRT_NDISP_HPER, 0x13}, /* CRT/TV Horizontal Non-Display Period Register*/
	{S1DREG_CRT_HRTC_START, 0x01}, /* CRT/TV HRTC Start Position Register*/
	{S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* CRT/TV HRTC Pulse Width Register*/
	{S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, /* CRT/TV Vertical Display Height Register 0*/
	{S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* CRT/TV Vertical Display Height Register 1*/
	{S1DREG_CRT_NDISP_VPER, 0x2B}, /* CRT/TV Vertical Non-Display Period Register*/
	{S1DREG_CRT_VRTC_START, 0x09}, /* CRT/TV VRTC Start Position Register*/
	{S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* CRT/TV VRTC Pulse Width Register*/
	{S1DREG_TV_OUT_CTL, 0x18}, /* TV Output Control Register */
	{S1DREG_CRT_DISP_MODE, 0x05}, /* CRT/TV Display Mode Register, 16BPP*/
	{S1DREG_CRT_DISP_START0, 0x00}, /* CRT/TV Display Start Address Register 0*/
	{S1DREG_CRT_DISP_START1, 0x00}, /* CRT/TV Display Start Address Register 1*/
	{S1DREG_CRT_DISP_START2, 0x00}, /* CRT/TV Display Start Address Register 2*/
	{S1DREG_CRT_MEM_OFF0, 0x80}, /* CRT/TV Memory Address Offset Register 0*/
	{S1DREG_CRT_MEM_OFF1, 0x02}, /* CRT/TV Memory Address Offset Register 1*/
	{S1DREG_CRT_PIX_PAN, 0x00}, /* CRT/TV Pixel Panning Register*/
	{S1DREG_CRT_DISP_FIFO_HTC, 0x00}, /* CRT/TV Display FIFO High Threshold Control Register*/
	{S1DREG_CRT_DISP_FIFO_LTC, 0x00}, /* CRT/TV Display FIFO Low Threshold Control Register*/
	{S1DREG_LCD_CUR_CTL, 0x00}, /* LCD Ink/Cursor Control Register*/
	{S1DREG_LCD_CUR_START, 0x01}, /* LCD Ink/Cursor Start Address Register*/
	{S1DREG_LCD_CUR_XPOS0, 0x00}, /* LCD Cursor X Position Register 0*/
	{S1DREG_LCD_CUR_XPOS1, 0x00}, /* LCD Cursor X Position Register 1*/
	{S1DREG_LCD_CUR_YPOS0, 0x00}, /* LCD Cursor Y Position Register 0*/
	{S1DREG_LCD_CUR_YPOS1, 0x00}, /* LCD Cursor Y Position Register 1*/
	{S1DREG_LCD_CUR_BCTL0, 0x00}, /* LCD Ink/Cursor Blue Color 0 Register*/
	{S1DREG_LCD_CUR_GCTL0, 0x00}, /* LCD Ink/Cursor Green Color 0 Register*/
	{S1DREG_LCD_CUR_RCTL0, 0x00}, /* LCD Ink/Cursor Red Color 0 Register*/
	{S1DREG_LCD_CUR_BCTL1, 0x1F}, /* LCD Ink/Cursor Blue Color 1 Register*/
	{S1DREG_LCD_CUR_GCTL1, 0x3F}, /* LCD Ink/Cursor Green Color 1 Register*/
	{S1DREG_LCD_CUR_RCTL1, 0x1F}, /* LCD Ink/Cursor Red Color 1 Register*/
	{S1DREG_LCD_CUR_FIFO_HTC, 0x00}, /* LCD Ink/Cursor FIFO Threshold Register*/
	{S1DREG_CRT_CUR_CTL, 0x00}, /* CRT/TV Ink/Cursor Control Register*/
	{S1DREG_CRT_CUR_START, 0x01}, /* CRT/TV Ink/Cursor Start Address Register*/
	{S1DREG_CRT_CUR_XPOS0, 0x00}, /* CRT/TV Cursor X Position Register 0*/
	{S1DREG_CRT_CUR_XPOS1, 0x00}, /* CRT/TV Cursor X Position Register 1*/
	{S1DREG_CRT_CUR_YPOS0, 0x00}, /* CRT/TV Cursor Y Position Register 0*/
	{S1DREG_CRT_CUR_YPOS1, 0x00}, /* CRT/TV Cursor Y Position Register 1*/
	{S1DREG_CRT_CUR_BCTL0, 0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register*/
	{S1DREG_CRT_CUR_GCTL0, 0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register*/
	{S1DREG_CRT_CUR_RCTL0, 0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register*/
	{S1DREG_CRT_CUR_BCTL1, 0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register*/
	{S1DREG_CRT_CUR_GCTL1, 0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register*/
	{S1DREG_CRT_CUR_RCTL1, 0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register*/
	{S1DREG_CRT_CUR_FIFO_HTC, 0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register*/
	{S1DREG_BBLT_CTL0, 0x00}, /* BitBlt Control Register 0*/
	{S1DREG_BBLT_CTL1, 0x01}, /* BitBlt Control Register 1*/
	{S1DREG_BBLT_CC_EXP, 0x00}, /* BitBlt ROP Code/Color Expansion Register*/
	{S1DREG_BBLT_OP, 0x00}, /* BitBlt Operation Register*/
	{S1DREG_BBLT_SRC_START0, 0x00}, /* BitBlt Source Start Address Register 0*/
	{S1DREG_BBLT_SRC_START1, 0x00}, /* BitBlt Source Start Address Register 1*/
	{S1DREG_BBLT_SRC_START2, 0x00}, /* BitBlt Source Start Address Register 2*/
	{S1DREG_BBLT_DST_START0, 0x00}, /* BitBlt Destination Start Address Register 0*/
	{S1DREG_BBLT_DST_START1, 0x00}, /* BitBlt Destination Start Address Register 1*/
	{S1DREG_BBLT_DST_START2, 0x00}, /* BitBlt Destination Start Address Register 2*/
	{S1DREG_BBLT_MEM_OFF0, 0x00}, /* BitBlt Memory Address Offset Register 0*/
	{S1DREG_BBLT_MEM_OFF1, 0x00}, /* BitBlt Memory Address Offset Register 1*/
	{S1DREG_BBLT_WIDTH0, 0x00}, /* BitBlt Width Register 0*/
	{S1DREG_BBLT_WIDTH1, 0x00}, /* BitBlt Width Register 1*/
	{S1DREG_BBLT_HEIGHT0, 0x00}, /* BitBlt Height Register 0*/
	{S1DREG_BBLT_HEIGHT1, 0x00}, /* BitBlt Height Register 1*/
	{S1DREG_BBLT_BGC0, 0x00}, /* BitBlt Background Color Register 0*/
	{S1DREG_BBLT_BGC1, 0x00}, /* BitBlt Background Color Register 1*/
	{S1DREG_BBLT_FGC0, 0x00}, /* BitBlt Foreground Color Register 0*/
	{S1DREG_BBLT_FGC1, 0x00}, /* BitBlt Foreground Color Register 1*/
	{S1DREG_LKUP_MODE, 0x00}, /* Look-Up Table Mode Register*/
	{S1DREG_LKUP_ADDR, 0x00}, /* Look-Up Table Address Register*/
	{S1DREG_PS_CNF, 0x00}, /* Power Save Configuration Register*/
	{S1DREG_PS_STATUS, 0x00}, /* Power Save Status Register*/
	{S1DREG_CPU2MEM_WDOGT, 0x00}, /* CPU-to-Memory Access Watchdog Timer Register*/
	{S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
	};

	static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
	.initregs = yl9200_s1dfb_initregs,
	.initregssize = ARRAY_SIZE(yl9200_s1dfb_initregs),
	.platform_init_video = yl9200_init_video,
	};

	#define YL9200_FB_REG_BASE AT91_CHIPSELECT_7
	#define YL9200_FB_VMEM_BASE YL9200_FB_REG_BASE + SZ_2M
	#define YL9200_FB_VMEM_SIZE SZ_2M

	static struct resource yl9200_s1dfb_resource[] = {
	[0] = { /* video mem */
	.name = "s1d13xxxfb memory",
	.start = YL9200_FB_VMEM_BASE,
	.end = YL9200_FB_VMEM_BASE + YL9200_FB_VMEM_SIZE -1,
	.flags = IORESOURCE_MEM,
	},
	[1] = { /* video registers */
	.name = "s1d13xxxfb registers",
	.start = YL9200_FB_REG_BASE,
	.end = YL9200_FB_REG_BASE + SZ_512 -1,
	.flags = IORESOURCE_MEM,
	},
	};

	static u64 s1dfb_dmamask = DMA_BIT_MASK(32);

	static struct platform_device yl9200_s1dfb_device = {
	.name = "s1d13806fb",
	.id = -1,
	.dev = {
	.dma_mask = &s1dfb_dmamask,
	.coherent_dma_mask = DMA_BIT_MASK(32),
	.platform_data = &yl9200_s1dfb_pdata,
	},
	.resource = yl9200_s1dfb_resource,
	.num_resources = ARRAY_SIZE(yl9200_s1dfb_resource),
	};

	void __init yl9200_add_device_video(void)
	{
	platform_device_register(&yl9200_s1dfb_device);
	}
	#else
	void __init yl9200_add_device_video(void) {}
	#endif


	static void __init yl9200_board_init(void)
	{
	/* Serial */
	at91_add_device_serial();
	/* Ethernet */
	at91_add_device_eth(&yl9200_eth_data);
	/* USB Host */
	at91_add_device_usbh(&yl9200_usbh_data);
	/* USB Device */
	at91_add_device_udc(&yl9200_udc_data);
	/* I2C */
	at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
	/* MMC */
	at91_add_device_mmc(0, &yl9200_mmc_data);
	/* NAND */
	at91_add_device_nand(&yl9200_nand_data);
	/* NOR Flash */
	platform_device_register(&yl9200_flash);
	#if defined(CONFIG_SPI_ATMEL) \|\| defined(CONFIG_SPI_ATMEL_MODULE)
	/* SPI */
	at91_add_device_spi(yl9200_spi_devices, ARRAY_SIZE(yl9200_spi_devices));
	/* Touchscreen */
	yl9200_add_device_ts();
	#endif
	/* LEDs. */
	at91_gpio_leds(yl9200_leds, ARRAY_SIZE(yl9200_leds));
	/* Push Buttons */
	yl9200_add_device_buttons();
	/* VGA */
	yl9200_add_device_video();
	}

	MACHINE_START(YL9200, "uCdragon YL-9200")
	/* Maintainer: S.Birtles */
	.timer = &at91rm9200_timer,
	.map_io = at91_map_io,
	.init_early = yl9200_init_early,
	.init_irq = at91_init_irq_default,
	.init_machine = yl9200_board_init,
	MACHINE_END