| /** |
| * PCI Endpoint *Function* (EPF) header file |
| * |
| * Copyright (C) 2017 Texas Instruments |
| * Author: Kishon Vijay Abraham I <kishon@ti.com> |
| * |
| * This program is free software: you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 of |
| * the License as published by the Free Software Foundation. |
| */ |
| |
| #ifndef __LINUX_PCI_EPF_H |
| #define __LINUX_PCI_EPF_H |
| |
| #include <linux/device.h> |
| #include <linux/mod_devicetable.h> |
| |
| struct pci_epf; |
| |
| enum pci_interrupt_pin { |
| PCI_INTERRUPT_UNKNOWN, |
| PCI_INTERRUPT_INTA, |
| PCI_INTERRUPT_INTB, |
| PCI_INTERRUPT_INTC, |
| PCI_INTERRUPT_INTD, |
| }; |
| |
| enum pci_barno { |
| BAR_0, |
| BAR_1, |
| BAR_2, |
| BAR_3, |
| BAR_4, |
| BAR_5, |
| }; |
| |
| /** |
| * struct pci_epf_header - represents standard configuration header |
| * @vendorid: identifies device manufacturer |
| * @deviceid: identifies a particular device |
| * @revid: specifies a device-specific revision identifier |
| * @progif_code: identifies a specific register-level programming interface |
| * @subclass_code: identifies more specifically the function of the device |
| * @baseclass_code: broadly classifies the type of function the device performs |
| * @cache_line_size: specifies the system cacheline size in units of DWORDs |
| * @subsys_vendor_id: vendor of the add-in card or subsystem |
| * @subsys_id: id specific to vendor |
| * @interrupt_pin: interrupt pin the device (or device function) uses |
| */ |
| struct pci_epf_header { |
| u16 vendorid; |
| u16 deviceid; |
| u8 revid; |
| u8 progif_code; |
| u8 subclass_code; |
| u8 baseclass_code; |
| u8 cache_line_size; |
| u16 subsys_vendor_id; |
| u16 subsys_id; |
| enum pci_interrupt_pin interrupt_pin; |
| }; |
| |
| /** |
| * struct pci_epf_ops - set of function pointers for performing EPF operations |
| * @bind: ops to perform when a EPC device has been bound to EPF device |
| * @unbind: ops to perform when a binding has been lost between a EPC device |
| * and EPF device |
| * @linkup: ops to perform when the EPC device has established a connection with |
| * a host system |
| */ |
| struct pci_epf_ops { |
| int (*bind)(struct pci_epf *epf); |
| void (*unbind)(struct pci_epf *epf); |
| void (*linkup)(struct pci_epf *epf); |
| }; |
| |
| /** |
| * struct pci_epf_driver - represents the PCI EPF driver |
| * @probe: ops to perform when a new EPF device has been bound to the EPF driver |
| * @remove: ops to perform when the binding between the EPF device and EPF |
| * driver is broken |
| * @driver: PCI EPF driver |
| * @ops: set of function pointers for performing EPF operations |
| * @owner: the owner of the module that registers the PCI EPF driver |
| * @group: configfs group corresponding to the PCI EPF driver |
| * @id_table: identifies EPF devices for probing |
| */ |
| struct pci_epf_driver { |
| int (*probe)(struct pci_epf *epf); |
| int (*remove)(struct pci_epf *epf); |
| |
| struct device_driver driver; |
| struct pci_epf_ops *ops; |
| struct module *owner; |
| struct config_group *group; |
| const struct pci_epf_device_id *id_table; |
| }; |
| |
| #define to_pci_epf_driver(drv) (container_of((drv), struct pci_epf_driver, \ |
| driver)) |
| |
| /** |
| * struct pci_epf_bar - represents the BAR of EPF device |
| * @phys_addr: physical address that should be mapped to the BAR |
| * @size: the size of the address space present in BAR |
| */ |
| struct pci_epf_bar { |
| dma_addr_t phys_addr; |
| size_t size; |
| }; |
| |
| /** |
| * struct pci_epf - represents the PCI EPF device |
| * @dev: the PCI EPF device |
| * @name: the name of the PCI EPF device |
| * @header: represents standard configuration header |
| * @bar: represents the BAR of EPF device |
| * @msi_interrupts: number of MSI interrupts required by this function |
| * @func_no: unique function number within this endpoint device |
| * @epc: the EPC device to which this EPF device is bound |
| * @driver: the EPF driver to which this EPF device is bound |
| * @list: to add pci_epf as a list of PCI endpoint functions to pci_epc |
| */ |
| struct pci_epf { |
| struct device dev; |
| const char *name; |
| struct pci_epf_header *header; |
| struct pci_epf_bar bar[6]; |
| u8 msi_interrupts; |
| u8 func_no; |
| |
| struct pci_epc *epc; |
| struct pci_epf_driver *driver; |
| struct list_head list; |
| }; |
| |
| #define to_pci_epf(epf_dev) container_of((epf_dev), struct pci_epf, dev) |
| |
| #define pci_epf_register_driver(driver) \ |
| __pci_epf_register_driver((driver), THIS_MODULE) |
| |
| static inline void epf_set_drvdata(struct pci_epf *epf, void *data) |
| { |
| dev_set_drvdata(&epf->dev, data); |
| } |
| |
| static inline void *epf_get_drvdata(struct pci_epf *epf) |
| { |
| return dev_get_drvdata(&epf->dev); |
| } |
| |
| struct pci_epf *pci_epf_create(const char *name); |
| void pci_epf_destroy(struct pci_epf *epf); |
| int __pci_epf_register_driver(struct pci_epf_driver *driver, |
| struct module *owner); |
| void pci_epf_unregister_driver(struct pci_epf_driver *driver); |
| void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar); |
| void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar); |
| int pci_epf_bind(struct pci_epf *epf); |
| void pci_epf_unbind(struct pci_epf *epf); |
| void pci_epf_linkup(struct pci_epf *epf); |
| #endif /* __LINUX_PCI_EPF_H */ |