| /* |
| * Copyright (c) 2005-2011 Atheros Communications Inc. |
| * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include "mac.h" |
| |
| #include <net/mac80211.h> |
| #include <linux/etherdevice.h> |
| |
| #include "hif.h" |
| #include "core.h" |
| #include "debug.h" |
| #include "wmi.h" |
| #include "htt.h" |
| #include "txrx.h" |
| |
| /**********/ |
| /* Crypto */ |
| /**********/ |
| |
| static int ath10k_send_key(struct ath10k_vif *arvif, |
| struct ieee80211_key_conf *key, |
| enum set_key_cmd cmd, |
| const u8 *macaddr) |
| { |
| struct wmi_vdev_install_key_arg arg = { |
| .vdev_id = arvif->vdev_id, |
| .key_idx = key->keyidx, |
| .key_len = key->keylen, |
| .key_data = key->key, |
| .macaddr = macaddr, |
| }; |
| |
| lockdep_assert_held(&arvif->ar->conf_mutex); |
| |
| if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) |
| arg.key_flags = WMI_KEY_PAIRWISE; |
| else |
| arg.key_flags = WMI_KEY_GROUP; |
| |
| switch (key->cipher) { |
| case WLAN_CIPHER_SUITE_CCMP: |
| arg.key_cipher = WMI_CIPHER_AES_CCM; |
| key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX; |
| break; |
| case WLAN_CIPHER_SUITE_TKIP: |
| arg.key_cipher = WMI_CIPHER_TKIP; |
| arg.key_txmic_len = 8; |
| arg.key_rxmic_len = 8; |
| break; |
| case WLAN_CIPHER_SUITE_WEP40: |
| case WLAN_CIPHER_SUITE_WEP104: |
| arg.key_cipher = WMI_CIPHER_WEP; |
| /* AP/IBSS mode requires self-key to be groupwise |
| * Otherwise pairwise key must be set */ |
| if (memcmp(macaddr, arvif->vif->addr, ETH_ALEN)) |
| arg.key_flags = WMI_KEY_PAIRWISE; |
| break; |
| default: |
| ath10k_warn("cipher %d is not supported\n", key->cipher); |
| return -EOPNOTSUPP; |
| } |
| |
| if (cmd == DISABLE_KEY) { |
| arg.key_cipher = WMI_CIPHER_NONE; |
| arg.key_data = NULL; |
| } |
| |
| return ath10k_wmi_vdev_install_key(arvif->ar, &arg); |
| } |
| |
| static int ath10k_install_key(struct ath10k_vif *arvif, |
| struct ieee80211_key_conf *key, |
| enum set_key_cmd cmd, |
| const u8 *macaddr) |
| { |
| struct ath10k *ar = arvif->ar; |
| int ret; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| reinit_completion(&ar->install_key_done); |
| |
| ret = ath10k_send_key(arvif, key, cmd, macaddr); |
| if (ret) |
| return ret; |
| |
| ret = wait_for_completion_timeout(&ar->install_key_done, 3*HZ); |
| if (ret == 0) |
| return -ETIMEDOUT; |
| |
| return 0; |
| } |
| |
| static int ath10k_install_peer_wep_keys(struct ath10k_vif *arvif, |
| const u8 *addr) |
| { |
| struct ath10k *ar = arvif->ar; |
| struct ath10k_peer *peer; |
| int ret; |
| int i; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| spin_lock_bh(&ar->data_lock); |
| peer = ath10k_peer_find(ar, arvif->vdev_id, addr); |
| spin_unlock_bh(&ar->data_lock); |
| |
| if (!peer) |
| return -ENOENT; |
| |
| for (i = 0; i < ARRAY_SIZE(arvif->wep_keys); i++) { |
| if (arvif->wep_keys[i] == NULL) |
| continue; |
| |
| ret = ath10k_install_key(arvif, arvif->wep_keys[i], SET_KEY, |
| addr); |
| if (ret) |
| return ret; |
| |
| peer->keys[i] = arvif->wep_keys[i]; |
| } |
| |
| return 0; |
| } |
| |
| static int ath10k_clear_peer_keys(struct ath10k_vif *arvif, |
| const u8 *addr) |
| { |
| struct ath10k *ar = arvif->ar; |
| struct ath10k_peer *peer; |
| int first_errno = 0; |
| int ret; |
| int i; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| spin_lock_bh(&ar->data_lock); |
| peer = ath10k_peer_find(ar, arvif->vdev_id, addr); |
| spin_unlock_bh(&ar->data_lock); |
| |
| if (!peer) |
| return -ENOENT; |
| |
| for (i = 0; i < ARRAY_SIZE(peer->keys); i++) { |
| if (peer->keys[i] == NULL) |
| continue; |
| |
| ret = ath10k_install_key(arvif, peer->keys[i], |
| DISABLE_KEY, addr); |
| if (ret && first_errno == 0) |
| first_errno = ret; |
| |
| if (ret) |
| ath10k_warn("could not remove peer wep key %d (%d)\n", |
| i, ret); |
| |
| peer->keys[i] = NULL; |
| } |
| |
| return first_errno; |
| } |
| |
| static int ath10k_clear_vdev_key(struct ath10k_vif *arvif, |
| struct ieee80211_key_conf *key) |
| { |
| struct ath10k *ar = arvif->ar; |
| struct ath10k_peer *peer; |
| u8 addr[ETH_ALEN]; |
| int first_errno = 0; |
| int ret; |
| int i; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| for (;;) { |
| /* since ath10k_install_key we can't hold data_lock all the |
| * time, so we try to remove the keys incrementally */ |
| spin_lock_bh(&ar->data_lock); |
| i = 0; |
| list_for_each_entry(peer, &ar->peers, list) { |
| for (i = 0; i < ARRAY_SIZE(peer->keys); i++) { |
| if (peer->keys[i] == key) { |
| memcpy(addr, peer->addr, ETH_ALEN); |
| peer->keys[i] = NULL; |
| break; |
| } |
| } |
| |
| if (i < ARRAY_SIZE(peer->keys)) |
| break; |
| } |
| spin_unlock_bh(&ar->data_lock); |
| |
| if (i == ARRAY_SIZE(peer->keys)) |
| break; |
| |
| ret = ath10k_install_key(arvif, key, DISABLE_KEY, addr); |
| if (ret && first_errno == 0) |
| first_errno = ret; |
| |
| if (ret) |
| ath10k_warn("could not remove key for %pM\n", addr); |
| } |
| |
| return first_errno; |
| } |
| |
| |
| /*********************/ |
| /* General utilities */ |
| /*********************/ |
| |
| static inline enum wmi_phy_mode |
| chan_to_phymode(const struct cfg80211_chan_def *chandef) |
| { |
| enum wmi_phy_mode phymode = MODE_UNKNOWN; |
| |
| switch (chandef->chan->band) { |
| case IEEE80211_BAND_2GHZ: |
| switch (chandef->width) { |
| case NL80211_CHAN_WIDTH_20_NOHT: |
| phymode = MODE_11G; |
| break; |
| case NL80211_CHAN_WIDTH_20: |
| phymode = MODE_11NG_HT20; |
| break; |
| case NL80211_CHAN_WIDTH_40: |
| phymode = MODE_11NG_HT40; |
| break; |
| case NL80211_CHAN_WIDTH_5: |
| case NL80211_CHAN_WIDTH_10: |
| case NL80211_CHAN_WIDTH_80: |
| case NL80211_CHAN_WIDTH_80P80: |
| case NL80211_CHAN_WIDTH_160: |
| phymode = MODE_UNKNOWN; |
| break; |
| } |
| break; |
| case IEEE80211_BAND_5GHZ: |
| switch (chandef->width) { |
| case NL80211_CHAN_WIDTH_20_NOHT: |
| phymode = MODE_11A; |
| break; |
| case NL80211_CHAN_WIDTH_20: |
| phymode = MODE_11NA_HT20; |
| break; |
| case NL80211_CHAN_WIDTH_40: |
| phymode = MODE_11NA_HT40; |
| break; |
| case NL80211_CHAN_WIDTH_80: |
| phymode = MODE_11AC_VHT80; |
| break; |
| case NL80211_CHAN_WIDTH_5: |
| case NL80211_CHAN_WIDTH_10: |
| case NL80211_CHAN_WIDTH_80P80: |
| case NL80211_CHAN_WIDTH_160: |
| phymode = MODE_UNKNOWN; |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| WARN_ON(phymode == MODE_UNKNOWN); |
| return phymode; |
| } |
| |
| static u8 ath10k_parse_mpdudensity(u8 mpdudensity) |
| { |
| /* |
| * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": |
| * 0 for no restriction |
| * 1 for 1/4 us |
| * 2 for 1/2 us |
| * 3 for 1 us |
| * 4 for 2 us |
| * 5 for 4 us |
| * 6 for 8 us |
| * 7 for 16 us |
| */ |
| switch (mpdudensity) { |
| case 0: |
| return 0; |
| case 1: |
| case 2: |
| case 3: |
| /* Our lower layer calculations limit our precision to |
| 1 microsecond */ |
| return 1; |
| case 4: |
| return 2; |
| case 5: |
| return 4; |
| case 6: |
| return 8; |
| case 7: |
| return 16; |
| default: |
| return 0; |
| } |
| } |
| |
| static int ath10k_peer_create(struct ath10k *ar, u32 vdev_id, const u8 *addr) |
| { |
| int ret; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| ret = ath10k_wmi_peer_create(ar, vdev_id, addr); |
| if (ret) |
| return ret; |
| |
| ret = ath10k_wait_for_peer_created(ar, vdev_id, addr); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int ath10k_mac_set_rts(struct ath10k_vif *arvif, u32 value) |
| { |
| struct ath10k *ar = arvif->ar; |
| u32 vdev_param; |
| |
| if (value != 0xFFFFFFFF) |
| value = min_t(u32, arvif->ar->hw->wiphy->rts_threshold, |
| ATH10K_RTS_MAX); |
| |
| vdev_param = ar->wmi.vdev_param->rts_threshold; |
| return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, value); |
| } |
| |
| static int ath10k_mac_set_frag(struct ath10k_vif *arvif, u32 value) |
| { |
| struct ath10k *ar = arvif->ar; |
| u32 vdev_param; |
| |
| if (value != 0xFFFFFFFF) |
| value = clamp_t(u32, arvif->ar->hw->wiphy->frag_threshold, |
| ATH10K_FRAGMT_THRESHOLD_MIN, |
| ATH10K_FRAGMT_THRESHOLD_MAX); |
| |
| vdev_param = ar->wmi.vdev_param->fragmentation_threshold; |
| return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, value); |
| } |
| |
| static int ath10k_peer_delete(struct ath10k *ar, u32 vdev_id, const u8 *addr) |
| { |
| int ret; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| ret = ath10k_wmi_peer_delete(ar, vdev_id, addr); |
| if (ret) |
| return ret; |
| |
| ret = ath10k_wait_for_peer_deleted(ar, vdev_id, addr); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void ath10k_peer_cleanup(struct ath10k *ar, u32 vdev_id) |
| { |
| struct ath10k_peer *peer, *tmp; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| spin_lock_bh(&ar->data_lock); |
| list_for_each_entry_safe(peer, tmp, &ar->peers, list) { |
| if (peer->vdev_id != vdev_id) |
| continue; |
| |
| ath10k_warn("removing stale peer %pM from vdev_id %d\n", |
| peer->addr, vdev_id); |
| |
| list_del(&peer->list); |
| kfree(peer); |
| } |
| spin_unlock_bh(&ar->data_lock); |
| } |
| |
| static void ath10k_peer_cleanup_all(struct ath10k *ar) |
| { |
| struct ath10k_peer *peer, *tmp; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| spin_lock_bh(&ar->data_lock); |
| list_for_each_entry_safe(peer, tmp, &ar->peers, list) { |
| list_del(&peer->list); |
| kfree(peer); |
| } |
| spin_unlock_bh(&ar->data_lock); |
| } |
| |
| /************************/ |
| /* Interface management */ |
| /************************/ |
| |
| static inline int ath10k_vdev_setup_sync(struct ath10k *ar) |
| { |
| int ret; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| ret = wait_for_completion_timeout(&ar->vdev_setup_done, |
| ATH10K_VDEV_SETUP_TIMEOUT_HZ); |
| if (ret == 0) |
| return -ETIMEDOUT; |
| |
| return 0; |
| } |
| |
| static int ath10k_vdev_start(struct ath10k_vif *arvif) |
| { |
| struct ath10k *ar = arvif->ar; |
| struct ieee80211_conf *conf = &ar->hw->conf; |
| struct ieee80211_channel *channel = conf->chandef.chan; |
| struct wmi_vdev_start_request_arg arg = {}; |
| int ret = 0; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| reinit_completion(&ar->vdev_setup_done); |
| |
| arg.vdev_id = arvif->vdev_id; |
| arg.dtim_period = arvif->dtim_period; |
| arg.bcn_intval = arvif->beacon_interval; |
| |
| arg.channel.freq = channel->center_freq; |
| |
| arg.channel.band_center_freq1 = conf->chandef.center_freq1; |
| |
| arg.channel.mode = chan_to_phymode(&conf->chandef); |
| |
| arg.channel.min_power = channel->max_power * 3; |
| arg.channel.max_power = channel->max_power * 4; |
| arg.channel.max_reg_power = channel->max_reg_power * 4; |
| arg.channel.max_antenna_gain = channel->max_antenna_gain; |
| |
| if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { |
| arg.ssid = arvif->u.ap.ssid; |
| arg.ssid_len = arvif->u.ap.ssid_len; |
| arg.hidden_ssid = arvif->u.ap.hidden_ssid; |
| } else if (arvif->vdev_type == WMI_VDEV_TYPE_IBSS) { |
| arg.ssid = arvif->vif->bss_conf.ssid; |
| arg.ssid_len = arvif->vif->bss_conf.ssid_len; |
| } |
| |
| ath10k_dbg(ATH10K_DBG_MAC, |
| "mac vdev %d start center_freq %d phymode %s\n", |
| arg.vdev_id, arg.channel.freq, |
| ath10k_wmi_phymode_str(arg.channel.mode)); |
| |
| ret = ath10k_wmi_vdev_start(ar, &arg); |
| if (ret) { |
| ath10k_warn("WMI vdev start failed: ret %d\n", ret); |
| return ret; |
| } |
| |
| ret = ath10k_vdev_setup_sync(ar); |
| if (ret) { |
| ath10k_warn("vdev setup failed %d\n", ret); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int ath10k_vdev_stop(struct ath10k_vif *arvif) |
| { |
| struct ath10k *ar = arvif->ar; |
| int ret; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| reinit_completion(&ar->vdev_setup_done); |
| |
| ret = ath10k_wmi_vdev_stop(ar, arvif->vdev_id); |
| if (ret) { |
| ath10k_warn("WMI vdev stop failed: ret %d\n", ret); |
| return ret; |
| } |
| |
| ret = ath10k_vdev_setup_sync(ar); |
| if (ret) { |
| ath10k_warn("vdev setup failed %d\n", ret); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int ath10k_monitor_start(struct ath10k *ar, int vdev_id) |
| { |
| struct ieee80211_channel *channel = ar->hw->conf.chandef.chan; |
| struct wmi_vdev_start_request_arg arg = {}; |
| int ret = 0; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| arg.vdev_id = vdev_id; |
| arg.channel.freq = channel->center_freq; |
| arg.channel.band_center_freq1 = ar->hw->conf.chandef.center_freq1; |
| |
| /* TODO setup this dynamically, what in case we |
| don't have any vifs? */ |
| arg.channel.mode = chan_to_phymode(&ar->hw->conf.chandef); |
| |
| arg.channel.min_power = channel->max_power * 3; |
| arg.channel.max_power = channel->max_power * 4; |
| arg.channel.max_reg_power = channel->max_reg_power * 4; |
| arg.channel.max_antenna_gain = channel->max_antenna_gain; |
| |
| ret = ath10k_wmi_vdev_start(ar, &arg); |
| if (ret) { |
| ath10k_warn("Monitor vdev start failed: ret %d\n", ret); |
| return ret; |
| } |
| |
| ret = ath10k_vdev_setup_sync(ar); |
| if (ret) { |
| ath10k_warn("Monitor vdev setup failed %d\n", ret); |
| return ret; |
| } |
| |
| ret = ath10k_wmi_vdev_up(ar, vdev_id, 0, ar->mac_addr); |
| if (ret) { |
| ath10k_warn("Monitor vdev up failed: %d\n", ret); |
| goto vdev_stop; |
| } |
| |
| ar->monitor_vdev_id = vdev_id; |
| ar->monitor_enabled = true; |
| |
| return 0; |
| |
| vdev_stop: |
| ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id); |
| if (ret) |
| ath10k_warn("Monitor vdev stop failed: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int ath10k_monitor_stop(struct ath10k *ar) |
| { |
| int ret = 0; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| ret = ath10k_wmi_vdev_down(ar, ar->monitor_vdev_id); |
| if (ret) |
| ath10k_warn("Monitor vdev down failed: %d\n", ret); |
| |
| ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id); |
| if (ret) |
| ath10k_warn("Monitor vdev stop failed: %d\n", ret); |
| |
| ret = ath10k_vdev_setup_sync(ar); |
| if (ret) |
| ath10k_warn("Monitor_down sync failed: %d\n", ret); |
| |
| ar->monitor_enabled = false; |
| return ret; |
| } |
| |
| static int ath10k_monitor_create(struct ath10k *ar) |
| { |
| int bit, ret = 0; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| if (ar->monitor_present) { |
| ath10k_warn("Monitor mode already enabled\n"); |
| return 0; |
| } |
| |
| bit = ffs(ar->free_vdev_map); |
| if (bit == 0) { |
| ath10k_warn("No free VDEV slots\n"); |
| return -ENOMEM; |
| } |
| |
| ar->monitor_vdev_id = bit - 1; |
| ar->free_vdev_map &= ~(1 << ar->monitor_vdev_id); |
| |
| ret = ath10k_wmi_vdev_create(ar, ar->monitor_vdev_id, |
| WMI_VDEV_TYPE_MONITOR, |
| 0, ar->mac_addr); |
| if (ret) { |
| ath10k_warn("WMI vdev monitor create failed: ret %d\n", ret); |
| goto vdev_fail; |
| } |
| |
| ath10k_dbg(ATH10K_DBG_MAC, "mac monitor vdev %d created\n", |
| ar->monitor_vdev_id); |
| |
| ar->monitor_present = true; |
| return 0; |
| |
| vdev_fail: |
| /* |
| * Restore the ID to the global map. |
| */ |
| ar->free_vdev_map |= 1 << (ar->monitor_vdev_id); |
| return ret; |
| } |
| |
| static int ath10k_monitor_destroy(struct ath10k *ar) |
| { |
| int ret = 0; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| if (!ar->monitor_present) |
| return 0; |
| |
| ret = ath10k_wmi_vdev_delete(ar, ar->monitor_vdev_id); |
| if (ret) { |
| ath10k_warn("WMI vdev monitor delete failed: %d\n", ret); |
| return ret; |
| } |
| |
| ar->free_vdev_map |= 1 << (ar->monitor_vdev_id); |
| ar->monitor_present = false; |
| |
| ath10k_dbg(ATH10K_DBG_MAC, "mac monitor vdev %d deleted\n", |
| ar->monitor_vdev_id); |
| return ret; |
| } |
| |
| static void ath10k_control_beaconing(struct ath10k_vif *arvif, |
| struct ieee80211_bss_conf *info) |
| { |
| int ret = 0; |
| |
| lockdep_assert_held(&arvif->ar->conf_mutex); |
| |
| if (!info->enable_beacon) { |
| ath10k_vdev_stop(arvif); |
| return; |
| } |
| |
| arvif->tx_seq_no = 0x1000; |
| |
| ret = ath10k_vdev_start(arvif); |
| if (ret) |
| return; |
| |
| ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, 0, info->bssid); |
| if (ret) { |
| ath10k_warn("Failed to bring up VDEV: %d\n", |
| arvif->vdev_id); |
| return; |
| } |
| ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d up\n", arvif->vdev_id); |
| } |
| |
| static void ath10k_control_ibss(struct ath10k_vif *arvif, |
| struct ieee80211_bss_conf *info, |
| const u8 self_peer[ETH_ALEN]) |
| { |
| u32 vdev_param; |
| int ret = 0; |
| |
| lockdep_assert_held(&arvif->ar->conf_mutex); |
| |
| if (!info->ibss_joined) { |
| ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, self_peer); |
| if (ret) |
| ath10k_warn("Failed to delete IBSS self peer:%pM for VDEV:%d ret:%d\n", |
| self_peer, arvif->vdev_id, ret); |
| |
| if (is_zero_ether_addr(arvif->u.ibss.bssid)) |
| return; |
| |
| ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, |
| arvif->u.ibss.bssid); |
| if (ret) { |
| ath10k_warn("Failed to delete IBSS BSSID peer:%pM for VDEV:%d ret:%d\n", |
| arvif->u.ibss.bssid, arvif->vdev_id, ret); |
| return; |
| } |
| |
| memset(arvif->u.ibss.bssid, 0, ETH_ALEN); |
| |
| return; |
| } |
| |
| ret = ath10k_peer_create(arvif->ar, arvif->vdev_id, self_peer); |
| if (ret) { |
| ath10k_warn("Failed to create IBSS self peer:%pM for VDEV:%d ret:%d\n", |
| self_peer, arvif->vdev_id, ret); |
| return; |
| } |
| |
| vdev_param = arvif->ar->wmi.vdev_param->atim_window; |
| ret = ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id, vdev_param, |
| ATH10K_DEFAULT_ATIM); |
| if (ret) |
| ath10k_warn("Failed to set IBSS ATIM for VDEV:%d ret:%d\n", |
| arvif->vdev_id, ret); |
| } |
| |
| /* |
| * Review this when mac80211 gains per-interface powersave support. |
| */ |
| static int ath10k_mac_vif_setup_ps(struct ath10k_vif *arvif) |
| { |
| struct ath10k *ar = arvif->ar; |
| struct ieee80211_conf *conf = &ar->hw->conf; |
| enum wmi_sta_powersave_param param; |
| enum wmi_sta_ps_mode psmode; |
| int ret; |
| |
| lockdep_assert_held(&arvif->ar->conf_mutex); |
| |
| if (arvif->vif->type != NL80211_IFTYPE_STATION) |
| return 0; |
| |
| if (conf->flags & IEEE80211_CONF_PS) { |
| psmode = WMI_STA_PS_MODE_ENABLED; |
| param = WMI_STA_PS_PARAM_INACTIVITY_TIME; |
| |
| ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param, |
| conf->dynamic_ps_timeout); |
| if (ret) { |
| ath10k_warn("Failed to set inactivity time for VDEV: %d\n", |
| arvif->vdev_id); |
| return ret; |
| } |
| } else { |
| psmode = WMI_STA_PS_MODE_DISABLED; |
| } |
| |
| ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d psmode %s\n", |
| arvif->vdev_id, psmode ? "enable" : "disable"); |
| |
| ret = ath10k_wmi_set_psmode(ar, arvif->vdev_id, psmode); |
| if (ret) { |
| ath10k_warn("Failed to set PS Mode: %d for VDEV: %d\n", |
| psmode, arvif->vdev_id); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /**********************/ |
| /* Station management */ |
| /**********************/ |
| |
| static void ath10k_peer_assoc_h_basic(struct ath10k *ar, |
| struct ath10k_vif *arvif, |
| struct ieee80211_sta *sta, |
| struct ieee80211_bss_conf *bss_conf, |
| struct wmi_peer_assoc_complete_arg *arg) |
| { |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| memcpy(arg->addr, sta->addr, ETH_ALEN); |
| arg->vdev_id = arvif->vdev_id; |
| arg->peer_aid = sta->aid; |
| arg->peer_flags |= WMI_PEER_AUTH; |
| |
| if (arvif->vdev_type == WMI_VDEV_TYPE_STA) |
| /* |
| * Seems FW have problems with Power Save in STA |
| * mode when we setup this parameter to high (eg. 5). |
| * Often we see that FW don't send NULL (with clean P flags) |
| * frame even there is info about buffered frames in beacons. |
| * Sometimes we have to wait more than 10 seconds before FW |
| * will wakeup. Often sending one ping from AP to our device |
| * just fail (more than 50%). |
| * |
| * Seems setting this FW parameter to 1 couse FW |
| * will check every beacon and will wakup immediately |
| * after detection buffered data. |
| */ |
| arg->peer_listen_intval = 1; |
| else |
| arg->peer_listen_intval = ar->hw->conf.listen_interval; |
| |
| arg->peer_num_spatial_streams = 1; |
| |
| /* |
| * The assoc capabilities are available only in managed mode. |
| */ |
| if (arvif->vdev_type == WMI_VDEV_TYPE_STA && bss_conf) |
| arg->peer_caps = bss_conf->assoc_capability; |
| } |
| |
| static void ath10k_peer_assoc_h_crypto(struct ath10k *ar, |
| struct ath10k_vif *arvif, |
| struct wmi_peer_assoc_complete_arg *arg) |
| { |
| struct ieee80211_vif *vif = arvif->vif; |
| struct ieee80211_bss_conf *info = &vif->bss_conf; |
| struct cfg80211_bss *bss; |
| const u8 *rsnie = NULL; |
| const u8 *wpaie = NULL; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| bss = cfg80211_get_bss(ar->hw->wiphy, ar->hw->conf.chandef.chan, |
| info->bssid, NULL, 0, 0, 0); |
| if (bss) { |
| const struct cfg80211_bss_ies *ies; |
| |
| rcu_read_lock(); |
| rsnie = ieee80211_bss_get_ie(bss, WLAN_EID_RSN); |
| |
| ies = rcu_dereference(bss->ies); |
| |
| wpaie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT, |
| WLAN_OUI_TYPE_MICROSOFT_WPA, |
| ies->data, |
| ies->len); |
| rcu_read_unlock(); |
| cfg80211_put_bss(ar->hw->wiphy, bss); |
| } |
| |
| /* FIXME: base on RSN IE/WPA IE is a correct idea? */ |
| if (rsnie || wpaie) { |
| ath10k_dbg(ATH10K_DBG_WMI, "%s: rsn ie found\n", __func__); |
| arg->peer_flags |= WMI_PEER_NEED_PTK_4_WAY; |
| } |
| |
| if (wpaie) { |
| ath10k_dbg(ATH10K_DBG_WMI, "%s: wpa ie found\n", __func__); |
| arg->peer_flags |= WMI_PEER_NEED_GTK_2_WAY; |
| } |
| } |
| |
| static void ath10k_peer_assoc_h_rates(struct ath10k *ar, |
| struct ieee80211_sta *sta, |
| struct wmi_peer_assoc_complete_arg *arg) |
| { |
| struct wmi_rate_set_arg *rateset = &arg->peer_legacy_rates; |
| const struct ieee80211_supported_band *sband; |
| const struct ieee80211_rate *rates; |
| u32 ratemask; |
| int i; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| sband = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band]; |
| ratemask = sta->supp_rates[ar->hw->conf.chandef.chan->band]; |
| rates = sband->bitrates; |
| |
| rateset->num_rates = 0; |
| |
| for (i = 0; i < 32; i++, ratemask >>= 1, rates++) { |
| if (!(ratemask & 1)) |
| continue; |
| |
| rateset->rates[rateset->num_rates] = rates->hw_value; |
| rateset->num_rates++; |
| } |
| } |
| |
| static void ath10k_peer_assoc_h_ht(struct ath10k *ar, |
| struct ieee80211_sta *sta, |
| struct wmi_peer_assoc_complete_arg *arg) |
| { |
| const struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; |
| int smps; |
| int i, n; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| if (!ht_cap->ht_supported) |
| return; |
| |
| arg->peer_flags |= WMI_PEER_HT; |
| arg->peer_max_mpdu = (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + |
| ht_cap->ampdu_factor)) - 1; |
| |
| arg->peer_mpdu_density = |
| ath10k_parse_mpdudensity(ht_cap->ampdu_density); |
| |
| arg->peer_ht_caps = ht_cap->cap; |
| arg->peer_rate_caps |= WMI_RC_HT_FLAG; |
| |
| if (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING) |
| arg->peer_flags |= WMI_PEER_LDPC; |
| |
| if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) { |
| arg->peer_flags |= WMI_PEER_40MHZ; |
| arg->peer_rate_caps |= WMI_RC_CW40_FLAG; |
| } |
| |
| if (ht_cap->cap & IEEE80211_HT_CAP_SGI_20) |
| arg->peer_rate_caps |= WMI_RC_SGI_FLAG; |
| |
| if (ht_cap->cap & IEEE80211_HT_CAP_SGI_40) |
| arg->peer_rate_caps |= WMI_RC_SGI_FLAG; |
| |
| if (ht_cap->cap & IEEE80211_HT_CAP_TX_STBC) { |
| arg->peer_rate_caps |= WMI_RC_TX_STBC_FLAG; |
| arg->peer_flags |= WMI_PEER_STBC; |
| } |
| |
| if (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC) { |
| u32 stbc; |
| stbc = ht_cap->cap & IEEE80211_HT_CAP_RX_STBC; |
| stbc = stbc >> IEEE80211_HT_CAP_RX_STBC_SHIFT; |
| stbc = stbc << WMI_RC_RX_STBC_FLAG_S; |
| arg->peer_rate_caps |= stbc; |
| arg->peer_flags |= WMI_PEER_STBC; |
| } |
| |
| smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS; |
| smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT; |
| |
| if (smps == WLAN_HT_CAP_SM_PS_STATIC) { |
| arg->peer_flags |= WMI_PEER_SPATIAL_MUX; |
| arg->peer_flags |= WMI_PEER_STATIC_MIMOPS; |
| } else if (smps == WLAN_HT_CAP_SM_PS_DYNAMIC) { |
| arg->peer_flags |= WMI_PEER_SPATIAL_MUX; |
| arg->peer_flags |= WMI_PEER_DYN_MIMOPS; |
| } |
| |
| if (ht_cap->mcs.rx_mask[1] && ht_cap->mcs.rx_mask[2]) |
| arg->peer_rate_caps |= WMI_RC_TS_FLAG; |
| else if (ht_cap->mcs.rx_mask[1]) |
| arg->peer_rate_caps |= WMI_RC_DS_FLAG; |
| |
| for (i = 0, n = 0; i < IEEE80211_HT_MCS_MASK_LEN*8; i++) |
| if (ht_cap->mcs.rx_mask[i/8] & (1 << i%8)) |
| arg->peer_ht_rates.rates[n++] = i; |
| |
| arg->peer_ht_rates.num_rates = n; |
| arg->peer_num_spatial_streams = max((n+7) / 8, 1); |
| |
| ath10k_dbg(ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n", |
| arg->addr, |
| arg->peer_ht_rates.num_rates, |
| arg->peer_num_spatial_streams); |
| } |
| |
| static void ath10k_peer_assoc_h_qos_ap(struct ath10k *ar, |
| struct ath10k_vif *arvif, |
| struct ieee80211_sta *sta, |
| struct ieee80211_bss_conf *bss_conf, |
| struct wmi_peer_assoc_complete_arg *arg) |
| { |
| u32 uapsd = 0; |
| u32 max_sp = 0; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| if (sta->wme) |
| arg->peer_flags |= WMI_PEER_QOS; |
| |
| if (sta->wme && sta->uapsd_queues) { |
| ath10k_dbg(ATH10K_DBG_MAC, "mac uapsd_queues 0x%x max_sp %d\n", |
| sta->uapsd_queues, sta->max_sp); |
| |
| arg->peer_flags |= WMI_PEER_APSD; |
| arg->peer_rate_caps |= WMI_RC_UAPSD_FLAG; |
| |
| if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) |
| uapsd |= WMI_AP_PS_UAPSD_AC3_DELIVERY_EN | |
| WMI_AP_PS_UAPSD_AC3_TRIGGER_EN; |
| if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI) |
| uapsd |= WMI_AP_PS_UAPSD_AC2_DELIVERY_EN | |
| WMI_AP_PS_UAPSD_AC2_TRIGGER_EN; |
| if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK) |
| uapsd |= WMI_AP_PS_UAPSD_AC1_DELIVERY_EN | |
| WMI_AP_PS_UAPSD_AC1_TRIGGER_EN; |
| if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE) |
| uapsd |= WMI_AP_PS_UAPSD_AC0_DELIVERY_EN | |
| WMI_AP_PS_UAPSD_AC0_TRIGGER_EN; |
| |
| |
| if (sta->max_sp < MAX_WMI_AP_PS_PEER_PARAM_MAX_SP) |
| max_sp = sta->max_sp; |
| |
| ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, |
| sta->addr, |
| WMI_AP_PS_PEER_PARAM_UAPSD, |
| uapsd); |
| |
| ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, |
| sta->addr, |
| WMI_AP_PS_PEER_PARAM_MAX_SP, |
| max_sp); |
| |
| /* TODO setup this based on STA listen interval and |
| beacon interval. Currently we don't know |
| sta->listen_interval - mac80211 patch required. |
| Currently use 10 seconds */ |
| ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, |
| sta->addr, |
| WMI_AP_PS_PEER_PARAM_AGEOUT_TIME, |
| 10); |
| } |
| } |
| |
| static void ath10k_peer_assoc_h_qos_sta(struct ath10k *ar, |
| struct ath10k_vif *arvif, |
| struct ieee80211_sta *sta, |
| struct ieee80211_bss_conf *bss_conf, |
| struct wmi_peer_assoc_complete_arg *arg) |
| { |
| if (bss_conf->qos) |
| arg->peer_flags |= WMI_PEER_QOS; |
| } |
| |
| static void ath10k_peer_assoc_h_vht(struct ath10k *ar, |
| struct ieee80211_sta *sta, |
| struct wmi_peer_assoc_complete_arg *arg) |
| { |
| const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap; |
| u8 ampdu_factor; |
| |
| if (!vht_cap->vht_supported) |
| return; |
| |
| arg->peer_flags |= WMI_PEER_VHT; |
| arg->peer_vht_caps = vht_cap->cap; |
| |
| |
| ampdu_factor = (vht_cap->cap & |
| IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK) >> |
| IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; |
| |
| /* Workaround: Some Netgear/Linksys 11ac APs set Rx A-MPDU factor to |
| * zero in VHT IE. Using it would result in degraded throughput. |
| * arg->peer_max_mpdu at this point contains HT max_mpdu so keep |
| * it if VHT max_mpdu is smaller. */ |
| arg->peer_max_mpdu = max(arg->peer_max_mpdu, |
| (1U << (IEEE80211_HT_MAX_AMPDU_FACTOR + |
| ampdu_factor)) - 1); |
| |
| if (sta->bandwidth == IEEE80211_STA_RX_BW_80) |
| arg->peer_flags |= WMI_PEER_80MHZ; |
| |
| arg->peer_vht_rates.rx_max_rate = |
| __le16_to_cpu(vht_cap->vht_mcs.rx_highest); |
| arg->peer_vht_rates.rx_mcs_set = |
| __le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map); |
| arg->peer_vht_rates.tx_max_rate = |
| __le16_to_cpu(vht_cap->vht_mcs.tx_highest); |
| arg->peer_vht_rates.tx_mcs_set = |
| __le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map); |
| |
| ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n", |
| sta->addr, arg->peer_max_mpdu, arg->peer_flags); |
| } |
| |
| static void ath10k_peer_assoc_h_qos(struct ath10k *ar, |
| struct ath10k_vif *arvif, |
| struct ieee80211_sta *sta, |
| struct ieee80211_bss_conf *bss_conf, |
| struct wmi_peer_assoc_complete_arg *arg) |
| { |
| switch (arvif->vdev_type) { |
| case WMI_VDEV_TYPE_AP: |
| ath10k_peer_assoc_h_qos_ap(ar, arvif, sta, bss_conf, arg); |
| break; |
| case WMI_VDEV_TYPE_STA: |
| ath10k_peer_assoc_h_qos_sta(ar, arvif, sta, bss_conf, arg); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void ath10k_peer_assoc_h_phymode(struct ath10k *ar, |
| struct ath10k_vif *arvif, |
| struct ieee80211_sta *sta, |
| struct wmi_peer_assoc_complete_arg *arg) |
| { |
| enum wmi_phy_mode phymode = MODE_UNKNOWN; |
| |
| switch (ar->hw->conf.chandef.chan->band) { |
| case IEEE80211_BAND_2GHZ: |
| if (sta->ht_cap.ht_supported) { |
| if (sta->bandwidth == IEEE80211_STA_RX_BW_40) |
| phymode = MODE_11NG_HT40; |
| else |
| phymode = MODE_11NG_HT20; |
| } else { |
| phymode = MODE_11G; |
| } |
| |
| break; |
| case IEEE80211_BAND_5GHZ: |
| /* |
| * Check VHT first. |
| */ |
| if (sta->vht_cap.vht_supported) { |
| if (sta->bandwidth == IEEE80211_STA_RX_BW_80) |
| phymode = MODE_11AC_VHT80; |
| else if (sta->bandwidth == IEEE80211_STA_RX_BW_40) |
| phymode = MODE_11AC_VHT40; |
| else if (sta->bandwidth == IEEE80211_STA_RX_BW_20) |
| phymode = MODE_11AC_VHT20; |
| } else if (sta->ht_cap.ht_supported) { |
| if (sta->bandwidth == IEEE80211_STA_RX_BW_40) |
| phymode = MODE_11NA_HT40; |
| else |
| phymode = MODE_11NA_HT20; |
| } else { |
| phymode = MODE_11A; |
| } |
| |
| break; |
| default: |
| break; |
| } |
| |
| ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %s\n", |
| sta->addr, ath10k_wmi_phymode_str(phymode)); |
| |
| arg->peer_phymode = phymode; |
| WARN_ON(phymode == MODE_UNKNOWN); |
| } |
| |
| static int ath10k_peer_assoc_prepare(struct ath10k *ar, |
| struct ath10k_vif *arvif, |
| struct ieee80211_sta *sta, |
| struct ieee80211_bss_conf *bss_conf, |
| struct wmi_peer_assoc_complete_arg *arg) |
| { |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| memset(arg, 0, sizeof(*arg)); |
| |
| ath10k_peer_assoc_h_basic(ar, arvif, sta, bss_conf, arg); |
| ath10k_peer_assoc_h_crypto(ar, arvif, arg); |
| ath10k_peer_assoc_h_rates(ar, sta, arg); |
| ath10k_peer_assoc_h_ht(ar, sta, arg); |
| ath10k_peer_assoc_h_vht(ar, sta, arg); |
| ath10k_peer_assoc_h_qos(ar, arvif, sta, bss_conf, arg); |
| ath10k_peer_assoc_h_phymode(ar, arvif, sta, arg); |
| |
| return 0; |
| } |
| |
| /* can be called only in mac80211 callbacks due to `key_count` usage */ |
| static void ath10k_bss_assoc(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_bss_conf *bss_conf) |
| { |
| struct ath10k *ar = hw->priv; |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| struct wmi_peer_assoc_complete_arg peer_arg; |
| struct ieee80211_sta *ap_sta; |
| int ret; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| rcu_read_lock(); |
| |
| ap_sta = ieee80211_find_sta(vif, bss_conf->bssid); |
| if (!ap_sta) { |
| ath10k_warn("Failed to find station entry for %pM\n", |
| bss_conf->bssid); |
| rcu_read_unlock(); |
| return; |
| } |
| |
| ret = ath10k_peer_assoc_prepare(ar, arvif, ap_sta, |
| bss_conf, &peer_arg); |
| if (ret) { |
| ath10k_warn("Peer assoc prepare failed for %pM\n: %d", |
| bss_conf->bssid, ret); |
| rcu_read_unlock(); |
| return; |
| } |
| |
| rcu_read_unlock(); |
| |
| ret = ath10k_wmi_peer_assoc(ar, &peer_arg); |
| if (ret) { |
| ath10k_warn("Peer assoc failed for %pM\n: %d", |
| bss_conf->bssid, ret); |
| return; |
| } |
| |
| ath10k_dbg(ATH10K_DBG_MAC, |
| "mac vdev %d up (associated) bssid %pM aid %d\n", |
| arvif->vdev_id, bss_conf->bssid, bss_conf->aid); |
| |
| ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, bss_conf->aid, |
| bss_conf->bssid); |
| if (ret) |
| ath10k_warn("VDEV: %d up failed: ret %d\n", |
| arvif->vdev_id, ret); |
| } |
| |
| /* |
| * FIXME: flush TIDs |
| */ |
| static void ath10k_bss_disassoc(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct ath10k *ar = hw->priv; |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| int ret; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| /* |
| * For some reason, calling VDEV-DOWN before VDEV-STOP |
| * makes the FW to send frames via HTT after disassociation. |
| * No idea why this happens, even though VDEV-DOWN is supposed |
| * to be analogous to link down, so just stop the VDEV. |
| */ |
| ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d stop (disassociated\n", |
| arvif->vdev_id); |
| |
| /* FIXME: check return value */ |
| ret = ath10k_vdev_stop(arvif); |
| |
| /* |
| * If we don't call VDEV-DOWN after VDEV-STOP FW will remain active and |
| * report beacons from previously associated network through HTT. |
| * This in turn would spam mac80211 WARN_ON if we bring down all |
| * interfaces as it expects there is no rx when no interface is |
| * running. |
| */ |
| ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d down\n", arvif->vdev_id); |
| |
| /* FIXME: why don't we print error if wmi call fails? */ |
| ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id); |
| |
| arvif->def_wep_key_idx = 0; |
| } |
| |
| static int ath10k_station_assoc(struct ath10k *ar, struct ath10k_vif *arvif, |
| struct ieee80211_sta *sta) |
| { |
| struct wmi_peer_assoc_complete_arg peer_arg; |
| int ret = 0; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| ret = ath10k_peer_assoc_prepare(ar, arvif, sta, NULL, &peer_arg); |
| if (ret) { |
| ath10k_warn("WMI peer assoc prepare failed for %pM\n", |
| sta->addr); |
| return ret; |
| } |
| |
| ret = ath10k_wmi_peer_assoc(ar, &peer_arg); |
| if (ret) { |
| ath10k_warn("Peer assoc failed for STA %pM\n: %d", |
| sta->addr, ret); |
| return ret; |
| } |
| |
| ret = ath10k_install_peer_wep_keys(arvif, sta->addr); |
| if (ret) { |
| ath10k_warn("could not install peer wep keys (%d)\n", ret); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int ath10k_station_disassoc(struct ath10k *ar, struct ath10k_vif *arvif, |
| struct ieee80211_sta *sta) |
| { |
| int ret = 0; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| ret = ath10k_clear_peer_keys(arvif, sta->addr); |
| if (ret) { |
| ath10k_warn("could not clear all peer wep keys (%d)\n", ret); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| /**************/ |
| /* Regulatory */ |
| /**************/ |
| |
| static int ath10k_update_channel_list(struct ath10k *ar) |
| { |
| struct ieee80211_hw *hw = ar->hw; |
| struct ieee80211_supported_band **bands; |
| enum ieee80211_band band; |
| struct ieee80211_channel *channel; |
| struct wmi_scan_chan_list_arg arg = {0}; |
| struct wmi_channel_arg *ch; |
| bool passive; |
| int len; |
| int ret; |
| int i; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| bands = hw->wiphy->bands; |
| for (band = 0; band < IEEE80211_NUM_BANDS; band++) { |
| if (!bands[band]) |
| continue; |
| |
| for (i = 0; i < bands[band]->n_channels; i++) { |
| if (bands[band]->channels[i].flags & |
| IEEE80211_CHAN_DISABLED) |
| continue; |
| |
| arg.n_channels++; |
| } |
| } |
| |
| len = sizeof(struct wmi_channel_arg) * arg.n_channels; |
| arg.channels = kzalloc(len, GFP_KERNEL); |
| if (!arg.channels) |
| return -ENOMEM; |
| |
| ch = arg.channels; |
| for (band = 0; band < IEEE80211_NUM_BANDS; band++) { |
| if (!bands[band]) |
| continue; |
| |
| for (i = 0; i < bands[band]->n_channels; i++) { |
| channel = &bands[band]->channels[i]; |
| |
| if (channel->flags & IEEE80211_CHAN_DISABLED) |
| continue; |
| |
| ch->allow_ht = true; |
| |
| /* FIXME: when should we really allow VHT? */ |
| ch->allow_vht = true; |
| |
| ch->allow_ibss = |
| !(channel->flags & IEEE80211_CHAN_NO_IR); |
| |
| ch->ht40plus = |
| !(channel->flags & IEEE80211_CHAN_NO_HT40PLUS); |
| |
| passive = channel->flags & IEEE80211_CHAN_NO_IR; |
| ch->passive = passive; |
| |
| ch->freq = channel->center_freq; |
| ch->min_power = channel->max_power * 3; |
| ch->max_power = channel->max_power * 4; |
| ch->max_reg_power = channel->max_reg_power * 4; |
| ch->max_antenna_gain = channel->max_antenna_gain; |
| ch->reg_class_id = 0; /* FIXME */ |
| |
| /* FIXME: why use only legacy modes, why not any |
| * HT/VHT modes? Would that even make any |
| * difference? */ |
| if (channel->band == IEEE80211_BAND_2GHZ) |
| ch->mode = MODE_11G; |
| else |
| ch->mode = MODE_11A; |
| |
| if (WARN_ON_ONCE(ch->mode == MODE_UNKNOWN)) |
| continue; |
| |
| ath10k_dbg(ATH10K_DBG_WMI, |
| "mac channel [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n", |
| ch - arg.channels, arg.n_channels, |
| ch->freq, ch->max_power, ch->max_reg_power, |
| ch->max_antenna_gain, ch->mode); |
| |
| ch++; |
| } |
| } |
| |
| ret = ath10k_wmi_scan_chan_list(ar, &arg); |
| kfree(arg.channels); |
| |
| return ret; |
| } |
| |
| static void ath10k_regd_update(struct ath10k *ar) |
| { |
| struct reg_dmn_pair_mapping *regpair; |
| int ret; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| ret = ath10k_update_channel_list(ar); |
| if (ret) |
| ath10k_warn("could not update channel list (%d)\n", ret); |
| |
| regpair = ar->ath_common.regulatory.regpair; |
| |
| /* Target allows setting up per-band regdomain but ath_common provides |
| * a combined one only */ |
| ret = ath10k_wmi_pdev_set_regdomain(ar, |
| regpair->regDmnEnum, |
| regpair->regDmnEnum, /* 2ghz */ |
| regpair->regDmnEnum, /* 5ghz */ |
| regpair->reg_2ghz_ctl, |
| regpair->reg_5ghz_ctl); |
| if (ret) |
| ath10k_warn("could not set pdev regdomain (%d)\n", ret); |
| } |
| |
| static void ath10k_reg_notifier(struct wiphy *wiphy, |
| struct regulatory_request *request) |
| { |
| struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); |
| struct ath10k *ar = hw->priv; |
| |
| ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory); |
| |
| mutex_lock(&ar->conf_mutex); |
| if (ar->state == ATH10K_STATE_ON) |
| ath10k_regd_update(ar); |
| mutex_unlock(&ar->conf_mutex); |
| } |
| |
| /***************/ |
| /* TX handlers */ |
| /***************/ |
| |
| static u8 ath10k_tx_h_get_tid(struct ieee80211_hdr *hdr) |
| { |
| if (ieee80211_is_mgmt(hdr->frame_control)) |
| return HTT_DATA_TX_EXT_TID_MGMT; |
| |
| if (!ieee80211_is_data_qos(hdr->frame_control)) |
| return HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST; |
| |
| if (!is_unicast_ether_addr(ieee80211_get_DA(hdr))) |
| return HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST; |
| |
| return ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK; |
| } |
| |
| static u8 ath10k_tx_h_get_vdev_id(struct ath10k *ar, |
| struct ieee80211_tx_info *info) |
| { |
| if (info->control.vif) |
| return ath10k_vif_to_arvif(info->control.vif)->vdev_id; |
| |
| if (ar->monitor_enabled) |
| return ar->monitor_vdev_id; |
| |
| ath10k_warn("could not resolve vdev id\n"); |
| return 0; |
| } |
| |
| /* |
| * Frames sent to the FW have to be in "Native Wifi" format. |
| * Strip the QoS field from the 802.11 header. |
| */ |
| static void ath10k_tx_h_qos_workaround(struct ieee80211_hw *hw, |
| struct ieee80211_tx_control *control, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_hdr *hdr = (void *)skb->data; |
| u8 *qos_ctl; |
| |
| if (!ieee80211_is_data_qos(hdr->frame_control)) |
| return; |
| |
| qos_ctl = ieee80211_get_qos_ctl(hdr); |
| memmove(skb->data + IEEE80211_QOS_CTL_LEN, |
| skb->data, (void *)qos_ctl - (void *)skb->data); |
| skb_pull(skb, IEEE80211_QOS_CTL_LEN); |
| } |
| |
| static void ath10k_tx_wep_key_work(struct work_struct *work) |
| { |
| struct ath10k_vif *arvif = container_of(work, struct ath10k_vif, |
| wep_key_work); |
| int ret, keyidx = arvif->def_wep_key_newidx; |
| |
| if (arvif->def_wep_key_idx == keyidx) |
| return; |
| |
| ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d set keyidx %d\n", |
| arvif->vdev_id, keyidx); |
| |
| ret = ath10k_wmi_vdev_set_param(arvif->ar, |
| arvif->vdev_id, |
| arvif->ar->wmi.vdev_param->def_keyid, |
| keyidx); |
| if (ret) { |
| ath10k_warn("could not update wep keyidx (%d)\n", ret); |
| return; |
| } |
| |
| arvif->def_wep_key_idx = keyidx; |
| } |
| |
| static void ath10k_tx_h_update_wep_key(struct sk_buff *skb) |
| { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_vif *vif = info->control.vif; |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| struct ath10k *ar = arvif->ar; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| struct ieee80211_key_conf *key = info->control.hw_key; |
| |
| if (!ieee80211_has_protected(hdr->frame_control)) |
| return; |
| |
| if (!key) |
| return; |
| |
| if (key->cipher != WLAN_CIPHER_SUITE_WEP40 && |
| key->cipher != WLAN_CIPHER_SUITE_WEP104) |
| return; |
| |
| if (key->keyidx == arvif->def_wep_key_idx) |
| return; |
| |
| /* FIXME: Most likely a few frames will be TXed with an old key. Simply |
| * queueing frames until key index is updated is not an option because |
| * sk_buff may need more processing to be done, e.g. offchannel */ |
| arvif->def_wep_key_newidx = key->keyidx; |
| ieee80211_queue_work(ar->hw, &arvif->wep_key_work); |
| } |
| |
| static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar, struct sk_buff *skb) |
| { |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_vif *vif = info->control.vif; |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| |
| /* This is case only for P2P_GO */ |
| if (arvif->vdev_type != WMI_VDEV_TYPE_AP || |
| arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO) |
| return; |
| |
| if (unlikely(ieee80211_is_probe_resp(hdr->frame_control))) { |
| spin_lock_bh(&ar->data_lock); |
| if (arvif->u.ap.noa_data) |
| if (!pskb_expand_head(skb, 0, arvif->u.ap.noa_len, |
| GFP_ATOMIC)) |
| memcpy(skb_put(skb, arvif->u.ap.noa_len), |
| arvif->u.ap.noa_data, |
| arvif->u.ap.noa_len); |
| spin_unlock_bh(&ar->data_lock); |
| } |
| } |
| |
| static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb) |
| { |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| int ret = 0; |
| |
| if (ar->htt.target_version_major >= 3) { |
| /* Since HTT 3.0 there is no separate mgmt tx command */ |
| ret = ath10k_htt_tx(&ar->htt, skb); |
| goto exit; |
| } |
| |
| if (ieee80211_is_mgmt(hdr->frame_control)) { |
| if (test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX, |
| ar->fw_features)) { |
| if (skb_queue_len(&ar->wmi_mgmt_tx_queue) >= |
| ATH10K_MAX_NUM_MGMT_PENDING) { |
| ath10k_warn("wmi mgmt_tx queue limit reached\n"); |
| ret = -EBUSY; |
| goto exit; |
| } |
| |
| skb_queue_tail(&ar->wmi_mgmt_tx_queue, skb); |
| ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work); |
| } else { |
| ret = ath10k_htt_mgmt_tx(&ar->htt, skb); |
| } |
| } else if (!test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX, |
| ar->fw_features) && |
| ieee80211_is_nullfunc(hdr->frame_control)) { |
| /* FW does not report tx status properly for NullFunc frames |
| * unless they are sent through mgmt tx path. mac80211 sends |
| * those frames when it detects link/beacon loss and depends |
| * on the tx status to be correct. */ |
| ret = ath10k_htt_mgmt_tx(&ar->htt, skb); |
| } else { |
| ret = ath10k_htt_tx(&ar->htt, skb); |
| } |
| |
| exit: |
| if (ret) { |
| ath10k_warn("tx failed (%d). dropping packet.\n", ret); |
| ieee80211_free_txskb(ar->hw, skb); |
| } |
| } |
| |
| void ath10k_offchan_tx_purge(struct ath10k *ar) |
| { |
| struct sk_buff *skb; |
| |
| for (;;) { |
| skb = skb_dequeue(&ar->offchan_tx_queue); |
| if (!skb) |
| break; |
| |
| ieee80211_free_txskb(ar->hw, skb); |
| } |
| } |
| |
| void ath10k_offchan_tx_work(struct work_struct *work) |
| { |
| struct ath10k *ar = container_of(work, struct ath10k, offchan_tx_work); |
| struct ath10k_peer *peer; |
| struct ieee80211_hdr *hdr; |
| struct sk_buff *skb; |
| const u8 *peer_addr; |
| int vdev_id; |
| int ret; |
| |
| /* FW requirement: We must create a peer before FW will send out |
| * an offchannel frame. Otherwise the frame will be stuck and |
| * never transmitted. We delete the peer upon tx completion. |
| * It is unlikely that a peer for offchannel tx will already be |
| * present. However it may be in some rare cases so account for that. |
| * Otherwise we might remove a legitimate peer and break stuff. */ |
| |
| for (;;) { |
| skb = skb_dequeue(&ar->offchan_tx_queue); |
| if (!skb) |
| break; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| ath10k_dbg(ATH10K_DBG_MAC, "mac offchannel skb %p\n", |
| skb); |
| |
| hdr = (struct ieee80211_hdr *)skb->data; |
| peer_addr = ieee80211_get_DA(hdr); |
| vdev_id = ATH10K_SKB_CB(skb)->vdev_id; |
| |
| spin_lock_bh(&ar->data_lock); |
| peer = ath10k_peer_find(ar, vdev_id, peer_addr); |
| spin_unlock_bh(&ar->data_lock); |
| |
| if (peer) |
| /* FIXME: should this use ath10k_warn()? */ |
| ath10k_dbg(ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n", |
| peer_addr, vdev_id); |
| |
| if (!peer) { |
| ret = ath10k_peer_create(ar, vdev_id, peer_addr); |
| if (ret) |
| ath10k_warn("peer %pM on vdev %d not created (%d)\n", |
| peer_addr, vdev_id, ret); |
| } |
| |
| spin_lock_bh(&ar->data_lock); |
| reinit_completion(&ar->offchan_tx_completed); |
| ar->offchan_tx_skb = skb; |
| spin_unlock_bh(&ar->data_lock); |
| |
| ath10k_tx_htt(ar, skb); |
| |
| ret = wait_for_completion_timeout(&ar->offchan_tx_completed, |
| 3 * HZ); |
| if (ret <= 0) |
| ath10k_warn("timed out waiting for offchannel skb %p\n", |
| skb); |
| |
| if (!peer) { |
| ret = ath10k_peer_delete(ar, vdev_id, peer_addr); |
| if (ret) |
| ath10k_warn("peer %pM on vdev %d not deleted (%d)\n", |
| peer_addr, vdev_id, ret); |
| } |
| |
| mutex_unlock(&ar->conf_mutex); |
| } |
| } |
| |
| void ath10k_mgmt_over_wmi_tx_purge(struct ath10k *ar) |
| { |
| struct sk_buff *skb; |
| |
| for (;;) { |
| skb = skb_dequeue(&ar->wmi_mgmt_tx_queue); |
| if (!skb) |
| break; |
| |
| ieee80211_free_txskb(ar->hw, skb); |
| } |
| } |
| |
| void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work) |
| { |
| struct ath10k *ar = container_of(work, struct ath10k, wmi_mgmt_tx_work); |
| struct sk_buff *skb; |
| int ret; |
| |
| for (;;) { |
| skb = skb_dequeue(&ar->wmi_mgmt_tx_queue); |
| if (!skb) |
| break; |
| |
| ret = ath10k_wmi_mgmt_tx(ar, skb); |
| if (ret) |
| ath10k_warn("wmi mgmt_tx failed (%d)\n", ret); |
| } |
| } |
| |
| /************/ |
| /* Scanning */ |
| /************/ |
| |
| /* |
| * This gets called if we dont get a heart-beat during scan. |
| * This may indicate the FW has hung and we need to abort the |
| * scan manually to prevent cancel_hw_scan() from deadlocking |
| */ |
| void ath10k_reset_scan(unsigned long ptr) |
| { |
| struct ath10k *ar = (struct ath10k *)ptr; |
| |
| spin_lock_bh(&ar->data_lock); |
| if (!ar->scan.in_progress) { |
| spin_unlock_bh(&ar->data_lock); |
| return; |
| } |
| |
| ath10k_warn("scan timeout. resetting. fw issue?\n"); |
| |
| if (ar->scan.is_roc) |
| ieee80211_remain_on_channel_expired(ar->hw); |
| else |
| ieee80211_scan_completed(ar->hw, 1 /* aborted */); |
| |
| ar->scan.in_progress = false; |
| complete_all(&ar->scan.completed); |
| spin_unlock_bh(&ar->data_lock); |
| } |
| |
| static int ath10k_abort_scan(struct ath10k *ar) |
| { |
| struct wmi_stop_scan_arg arg = { |
| .req_id = 1, /* FIXME */ |
| .req_type = WMI_SCAN_STOP_ONE, |
| .u.scan_id = ATH10K_SCAN_ID, |
| }; |
| int ret; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| del_timer_sync(&ar->scan.timeout); |
| |
| spin_lock_bh(&ar->data_lock); |
| if (!ar->scan.in_progress) { |
| spin_unlock_bh(&ar->data_lock); |
| return 0; |
| } |
| |
| ar->scan.aborting = true; |
| spin_unlock_bh(&ar->data_lock); |
| |
| ret = ath10k_wmi_stop_scan(ar, &arg); |
| if (ret) { |
| ath10k_warn("could not submit wmi stop scan (%d)\n", ret); |
| spin_lock_bh(&ar->data_lock); |
| ar->scan.in_progress = false; |
| ath10k_offchan_tx_purge(ar); |
| spin_unlock_bh(&ar->data_lock); |
| return -EIO; |
| } |
| |
| ret = wait_for_completion_timeout(&ar->scan.completed, 3*HZ); |
| if (ret == 0) |
| ath10k_warn("timed out while waiting for scan to stop\n"); |
| |
| /* scan completion may be done right after we timeout here, so let's |
| * check the in_progress and tell mac80211 scan is completed. if we |
| * don't do that and FW fails to send us scan completion indication |
| * then userspace won't be able to scan anymore */ |
| ret = 0; |
| |
| spin_lock_bh(&ar->data_lock); |
| if (ar->scan.in_progress) { |
| ath10k_warn("could not stop scan. its still in progress\n"); |
| ar->scan.in_progress = false; |
| ath10k_offchan_tx_purge(ar); |
| ret = -ETIMEDOUT; |
| } |
| spin_unlock_bh(&ar->data_lock); |
| |
| return ret; |
| } |
| |
| static int ath10k_start_scan(struct ath10k *ar, |
| const struct wmi_start_scan_arg *arg) |
| { |
| int ret; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| ret = ath10k_wmi_start_scan(ar, arg); |
| if (ret) |
| return ret; |
| |
| ret = wait_for_completion_timeout(&ar->scan.started, 1*HZ); |
| if (ret == 0) { |
| ath10k_abort_scan(ar); |
| return ret; |
| } |
| |
| /* the scan can complete earlier, before we even |
| * start the timer. in that case the timer handler |
| * checks ar->scan.in_progress and bails out if its |
| * false. Add a 200ms margin to account event/command |
| * processing. */ |
| mod_timer(&ar->scan.timeout, jiffies + |
| msecs_to_jiffies(arg->max_scan_time+200)); |
| return 0; |
| } |
| |
| /**********************/ |
| /* mac80211 callbacks */ |
| /**********************/ |
| |
| static void ath10k_tx(struct ieee80211_hw *hw, |
| struct ieee80211_tx_control *control, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| struct ath10k *ar = hw->priv; |
| u8 tid, vdev_id; |
| |
| /* We should disable CCK RATE due to P2P */ |
| if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE) |
| ath10k_dbg(ATH10K_DBG_MAC, "IEEE80211_TX_CTL_NO_CCK_RATE\n"); |
| |
| /* we must calculate tid before we apply qos workaround |
| * as we'd lose the qos control field */ |
| tid = ath10k_tx_h_get_tid(hdr); |
| vdev_id = ath10k_tx_h_get_vdev_id(ar, info); |
| |
| /* it makes no sense to process injected frames like that */ |
| if (info->control.vif && |
| info->control.vif->type != NL80211_IFTYPE_MONITOR) { |
| ath10k_tx_h_qos_workaround(hw, control, skb); |
| ath10k_tx_h_update_wep_key(skb); |
| ath10k_tx_h_add_p2p_noa_ie(ar, skb); |
| ath10k_tx_h_seq_no(skb); |
| } |
| |
| ATH10K_SKB_CB(skb)->vdev_id = vdev_id; |
| ATH10K_SKB_CB(skb)->htt.is_offchan = false; |
| ATH10K_SKB_CB(skb)->htt.tid = tid; |
| |
| if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) { |
| spin_lock_bh(&ar->data_lock); |
| ATH10K_SKB_CB(skb)->htt.is_offchan = true; |
| ATH10K_SKB_CB(skb)->vdev_id = ar->scan.vdev_id; |
| spin_unlock_bh(&ar->data_lock); |
| |
| ath10k_dbg(ATH10K_DBG_MAC, "queued offchannel skb %p\n", skb); |
| |
| skb_queue_tail(&ar->offchan_tx_queue, skb); |
| ieee80211_queue_work(hw, &ar->offchan_tx_work); |
| return; |
| } |
| |
| ath10k_tx_htt(ar, skb); |
| } |
| |
| /* |
| * Initialize various parameters with default vaules. |
| */ |
| void ath10k_halt(struct ath10k *ar) |
| { |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| del_timer_sync(&ar->scan.timeout); |
| ath10k_offchan_tx_purge(ar); |
| ath10k_mgmt_over_wmi_tx_purge(ar); |
| ath10k_peer_cleanup_all(ar); |
| ath10k_core_stop(ar); |
| ath10k_hif_power_down(ar); |
| |
| spin_lock_bh(&ar->data_lock); |
| if (ar->scan.in_progress) { |
| del_timer(&ar->scan.timeout); |
| ar->scan.in_progress = false; |
| ieee80211_scan_completed(ar->hw, true); |
| } |
| spin_unlock_bh(&ar->data_lock); |
| } |
| |
| static int ath10k_start(struct ieee80211_hw *hw) |
| { |
| struct ath10k *ar = hw->priv; |
| int ret = 0; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| if (ar->state != ATH10K_STATE_OFF && |
| ar->state != ATH10K_STATE_RESTARTING) { |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| ret = ath10k_hif_power_up(ar); |
| if (ret) { |
| ath10k_err("could not init hif (%d)\n", ret); |
| ar->state = ATH10K_STATE_OFF; |
| goto exit; |
| } |
| |
| ret = ath10k_core_start(ar); |
| if (ret) { |
| ath10k_err("could not init core (%d)\n", ret); |
| ath10k_hif_power_down(ar); |
| ar->state = ATH10K_STATE_OFF; |
| goto exit; |
| } |
| |
| if (ar->state == ATH10K_STATE_OFF) |
| ar->state = ATH10K_STATE_ON; |
| else if (ar->state == ATH10K_STATE_RESTARTING) |
| ar->state = ATH10K_STATE_RESTARTED; |
| |
| ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->pmf_qos, 1); |
| if (ret) |
| ath10k_warn("could not enable WMI_PDEV_PARAM_PMF_QOS (%d)\n", |
| ret); |
| |
| ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->dynamic_bw, 0); |
| if (ret) |
| ath10k_warn("could not init WMI_PDEV_PARAM_DYNAMIC_BW (%d)\n", |
| ret); |
| |
| ath10k_regd_update(ar); |
| |
| exit: |
| mutex_unlock(&ar->conf_mutex); |
| return 0; |
| } |
| |
| static void ath10k_stop(struct ieee80211_hw *hw) |
| { |
| struct ath10k *ar = hw->priv; |
| |
| mutex_lock(&ar->conf_mutex); |
| if (ar->state == ATH10K_STATE_ON || |
| ar->state == ATH10K_STATE_RESTARTED || |
| ar->state == ATH10K_STATE_WEDGED) |
| ath10k_halt(ar); |
| |
| ar->state = ATH10K_STATE_OFF; |
| mutex_unlock(&ar->conf_mutex); |
| |
| ath10k_mgmt_over_wmi_tx_purge(ar); |
| |
| cancel_work_sync(&ar->offchan_tx_work); |
| cancel_work_sync(&ar->wmi_mgmt_tx_work); |
| cancel_work_sync(&ar->restart_work); |
| } |
| |
| static int ath10k_config_ps(struct ath10k *ar) |
| { |
| struct ath10k_vif *arvif; |
| int ret = 0; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| list_for_each_entry(arvif, &ar->arvifs, list) { |
| ret = ath10k_mac_vif_setup_ps(arvif); |
| if (ret) { |
| ath10k_warn("could not setup powersave (%d)\n", ret); |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int ath10k_config(struct ieee80211_hw *hw, u32 changed) |
| { |
| struct ath10k *ar = hw->priv; |
| struct ieee80211_conf *conf = &hw->conf; |
| int ret = 0; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { |
| ath10k_dbg(ATH10K_DBG_MAC, "mac config channel %d mhz\n", |
| conf->chandef.chan->center_freq); |
| spin_lock_bh(&ar->data_lock); |
| ar->rx_channel = conf->chandef.chan; |
| spin_unlock_bh(&ar->data_lock); |
| } |
| |
| if (changed & IEEE80211_CONF_CHANGE_PS) |
| ath10k_config_ps(ar); |
| |
| if (changed & IEEE80211_CONF_CHANGE_MONITOR) { |
| if (conf->flags & IEEE80211_CONF_MONITOR) |
| ret = ath10k_monitor_create(ar); |
| else |
| ret = ath10k_monitor_destroy(ar); |
| } |
| |
| mutex_unlock(&ar->conf_mutex); |
| return ret; |
| } |
| |
| /* |
| * TODO: |
| * Figure out how to handle WMI_VDEV_SUBTYPE_P2P_DEVICE, |
| * because we will send mgmt frames without CCK. This requirement |
| * for P2P_FIND/GO_NEG should be handled by checking CCK flag |
| * in the TX packet. |
| */ |
| static int ath10k_add_interface(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct ath10k *ar = hw->priv; |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| enum wmi_sta_powersave_param param; |
| int ret = 0; |
| u32 value; |
| int bit; |
| u32 vdev_param; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| memset(arvif, 0, sizeof(*arvif)); |
| |
| arvif->ar = ar; |
| arvif->vif = vif; |
| |
| INIT_WORK(&arvif->wep_key_work, ath10k_tx_wep_key_work); |
| |
| if ((vif->type == NL80211_IFTYPE_MONITOR) && ar->monitor_present) { |
| ath10k_warn("Only one monitor interface allowed\n"); |
| ret = -EBUSY; |
| goto err; |
| } |
| |
| bit = ffs(ar->free_vdev_map); |
| if (bit == 0) { |
| ret = -EBUSY; |
| goto err; |
| } |
| |
| arvif->vdev_id = bit - 1; |
| arvif->vdev_subtype = WMI_VDEV_SUBTYPE_NONE; |
| |
| if (ar->p2p) |
| arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE; |
| |
| switch (vif->type) { |
| case NL80211_IFTYPE_UNSPECIFIED: |
| case NL80211_IFTYPE_STATION: |
| arvif->vdev_type = WMI_VDEV_TYPE_STA; |
| if (vif->p2p) |
| arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_CLIENT; |
| break; |
| case NL80211_IFTYPE_ADHOC: |
| arvif->vdev_type = WMI_VDEV_TYPE_IBSS; |
| break; |
| case NL80211_IFTYPE_AP: |
| arvif->vdev_type = WMI_VDEV_TYPE_AP; |
| |
| if (vif->p2p) |
| arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_GO; |
| break; |
| case NL80211_IFTYPE_MONITOR: |
| arvif->vdev_type = WMI_VDEV_TYPE_MONITOR; |
| break; |
| default: |
| WARN_ON(1); |
| break; |
| } |
| |
| ath10k_dbg(ATH10K_DBG_MAC, "mac vdev create %d (add interface) type %d subtype %d\n", |
| arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype); |
| |
| ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type, |
| arvif->vdev_subtype, vif->addr); |
| if (ret) { |
| ath10k_warn("WMI vdev create failed: ret %d\n", ret); |
| goto err; |
| } |
| |
| ar->free_vdev_map &= ~BIT(arvif->vdev_id); |
| list_add(&arvif->list, &ar->arvifs); |
| |
| vdev_param = ar->wmi.vdev_param->def_keyid; |
| ret = ath10k_wmi_vdev_set_param(ar, 0, vdev_param, |
| arvif->def_wep_key_idx); |
| if (ret) { |
| ath10k_warn("Failed to set default keyid: %d\n", ret); |
| goto err_vdev_delete; |
| } |
| |
| vdev_param = ar->wmi.vdev_param->tx_encap_type; |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, |
| ATH10K_HW_TXRX_NATIVE_WIFI); |
| /* 10.X firmware does not support this VDEV parameter. Do not warn */ |
| if (ret && ret != -EOPNOTSUPP) { |
| ath10k_warn("Failed to set TX encap: %d\n", ret); |
| goto err_vdev_delete; |
| } |
| |
| if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { |
| ret = ath10k_peer_create(ar, arvif->vdev_id, vif->addr); |
| if (ret) { |
| ath10k_warn("Failed to create peer for AP: %d\n", ret); |
| goto err_vdev_delete; |
| } |
| } |
| |
| if (arvif->vdev_type == WMI_VDEV_TYPE_STA) { |
| param = WMI_STA_PS_PARAM_RX_WAKE_POLICY; |
| value = WMI_STA_PS_RX_WAKE_POLICY_WAKE; |
| ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, |
| param, value); |
| if (ret) { |
| ath10k_warn("Failed to set RX wake policy: %d\n", ret); |
| goto err_peer_delete; |
| } |
| |
| param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD; |
| value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS; |
| ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, |
| param, value); |
| if (ret) { |
| ath10k_warn("Failed to set TX wake thresh: %d\n", ret); |
| goto err_peer_delete; |
| } |
| |
| param = WMI_STA_PS_PARAM_PSPOLL_COUNT; |
| value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX; |
| ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, |
| param, value); |
| if (ret) { |
| ath10k_warn("Failed to set PSPOLL count: %d\n", ret); |
| goto err_peer_delete; |
| } |
| } |
| |
| ret = ath10k_mac_set_rts(arvif, ar->hw->wiphy->rts_threshold); |
| if (ret) { |
| ath10k_warn("failed to set rts threshold for vdev %d (%d)\n", |
| arvif->vdev_id, ret); |
| goto err_peer_delete; |
| } |
| |
| ret = ath10k_mac_set_frag(arvif, ar->hw->wiphy->frag_threshold); |
| if (ret) { |
| ath10k_warn("failed to set frag threshold for vdev %d (%d)\n", |
| arvif->vdev_id, ret); |
| goto err_peer_delete; |
| } |
| |
| if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR) |
| ar->monitor_present = true; |
| |
| mutex_unlock(&ar->conf_mutex); |
| return 0; |
| |
| err_peer_delete: |
| if (arvif->vdev_type == WMI_VDEV_TYPE_AP) |
| ath10k_wmi_peer_delete(ar, arvif->vdev_id, vif->addr); |
| |
| err_vdev_delete: |
| ath10k_wmi_vdev_delete(ar, arvif->vdev_id); |
| ar->free_vdev_map &= ~BIT(arvif->vdev_id); |
| list_del(&arvif->list); |
| |
| err: |
| mutex_unlock(&ar->conf_mutex); |
| |
| return ret; |
| } |
| |
| static void ath10k_remove_interface(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct ath10k *ar = hw->priv; |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| int ret; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| cancel_work_sync(&arvif->wep_key_work); |
| |
| spin_lock_bh(&ar->data_lock); |
| if (arvif->beacon) { |
| dev_kfree_skb_any(arvif->beacon); |
| arvif->beacon = NULL; |
| } |
| spin_unlock_bh(&ar->data_lock); |
| |
| ar->free_vdev_map |= 1 << (arvif->vdev_id); |
| list_del(&arvif->list); |
| |
| if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { |
| ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, vif->addr); |
| if (ret) |
| ath10k_warn("Failed to remove peer for AP: %d\n", ret); |
| |
| kfree(arvif->u.ap.noa_data); |
| } |
| |
| ath10k_dbg(ATH10K_DBG_MAC, "mac vdev delete %d (remove interface)\n", |
| arvif->vdev_id); |
| |
| ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id); |
| if (ret) |
| ath10k_warn("WMI vdev delete failed: %d\n", ret); |
| |
| if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR) |
| ar->monitor_present = false; |
| |
| ath10k_peer_cleanup(ar, arvif->vdev_id); |
| |
| mutex_unlock(&ar->conf_mutex); |
| } |
| |
| /* |
| * FIXME: Has to be verified. |
| */ |
| #define SUPPORTED_FILTERS \ |
| (FIF_PROMISC_IN_BSS | \ |
| FIF_ALLMULTI | \ |
| FIF_CONTROL | \ |
| FIF_PSPOLL | \ |
| FIF_OTHER_BSS | \ |
| FIF_BCN_PRBRESP_PROMISC | \ |
| FIF_PROBE_REQ | \ |
| FIF_FCSFAIL) |
| |
| static void ath10k_configure_filter(struct ieee80211_hw *hw, |
| unsigned int changed_flags, |
| unsigned int *total_flags, |
| u64 multicast) |
| { |
| struct ath10k *ar = hw->priv; |
| int ret; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| changed_flags &= SUPPORTED_FILTERS; |
| *total_flags &= SUPPORTED_FILTERS; |
| ar->filter_flags = *total_flags; |
| |
| if ((ar->filter_flags & FIF_PROMISC_IN_BSS) && |
| !ar->monitor_enabled) { |
| ath10k_dbg(ATH10K_DBG_MAC, "mac monitor %d start\n", |
| ar->monitor_vdev_id); |
| |
| ret = ath10k_monitor_start(ar, ar->monitor_vdev_id); |
| if (ret) |
| ath10k_warn("Unable to start monitor mode\n"); |
| } else if (!(ar->filter_flags & FIF_PROMISC_IN_BSS) && |
| ar->monitor_enabled) { |
| ath10k_dbg(ATH10K_DBG_MAC, "mac monitor %d stop\n", |
| ar->monitor_vdev_id); |
| |
| ret = ath10k_monitor_stop(ar); |
| if (ret) |
| ath10k_warn("Unable to stop monitor mode\n"); |
| } |
| |
| mutex_unlock(&ar->conf_mutex); |
| } |
| |
| static void ath10k_bss_info_changed(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_bss_conf *info, |
| u32 changed) |
| { |
| struct ath10k *ar = hw->priv; |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| int ret = 0; |
| u32 vdev_param, pdev_param; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| if (changed & BSS_CHANGED_IBSS) |
| ath10k_control_ibss(arvif, info, vif->addr); |
| |
| if (changed & BSS_CHANGED_BEACON_INT) { |
| arvif->beacon_interval = info->beacon_int; |
| vdev_param = ar->wmi.vdev_param->beacon_interval; |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, |
| arvif->beacon_interval); |
| ath10k_dbg(ATH10K_DBG_MAC, |
| "mac vdev %d beacon_interval %d\n", |
| arvif->vdev_id, arvif->beacon_interval); |
| |
| if (ret) |
| ath10k_warn("Failed to set beacon interval for VDEV: %d\n", |
| arvif->vdev_id); |
| } |
| |
| if (changed & BSS_CHANGED_BEACON) { |
| ath10k_dbg(ATH10K_DBG_MAC, |
| "vdev %d set beacon tx mode to staggered\n", |
| arvif->vdev_id); |
| |
| pdev_param = ar->wmi.pdev_param->beacon_tx_mode; |
| ret = ath10k_wmi_pdev_set_param(ar, pdev_param, |
| WMI_BEACON_STAGGERED_MODE); |
| if (ret) |
| ath10k_warn("Failed to set beacon mode for VDEV: %d\n", |
| arvif->vdev_id); |
| } |
| |
| if (changed & BSS_CHANGED_BEACON_INFO) { |
| arvif->dtim_period = info->dtim_period; |
| |
| ath10k_dbg(ATH10K_DBG_MAC, |
| "mac vdev %d dtim_period %d\n", |
| arvif->vdev_id, arvif->dtim_period); |
| |
| vdev_param = ar->wmi.vdev_param->dtim_period; |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, |
| arvif->dtim_period); |
| if (ret) |
| ath10k_warn("Failed to set dtim period for VDEV: %d\n", |
| arvif->vdev_id); |
| } |
| |
| if (changed & BSS_CHANGED_SSID && |
| vif->type == NL80211_IFTYPE_AP) { |
| arvif->u.ap.ssid_len = info->ssid_len; |
| if (info->ssid_len) |
| memcpy(arvif->u.ap.ssid, info->ssid, info->ssid_len); |
| arvif->u.ap.hidden_ssid = info->hidden_ssid; |
| } |
| |
| if (changed & BSS_CHANGED_BSSID) { |
| if (!is_zero_ether_addr(info->bssid)) { |
| ath10k_dbg(ATH10K_DBG_MAC, |
| "mac vdev %d create peer %pM\n", |
| arvif->vdev_id, info->bssid); |
| |
| ret = ath10k_peer_create(ar, arvif->vdev_id, |
| info->bssid); |
| if (ret) |
| ath10k_warn("Failed to add peer: %pM for VDEV: %d\n", |
| info->bssid, arvif->vdev_id); |
| |
| if (vif->type == NL80211_IFTYPE_STATION) { |
| /* |
| * this is never erased as we it for crypto key |
| * clearing; this is FW requirement |
| */ |
| memcpy(arvif->u.sta.bssid, info->bssid, |
| ETH_ALEN); |
| |
| ath10k_dbg(ATH10K_DBG_MAC, |
| "mac vdev %d start %pM\n", |
| arvif->vdev_id, info->bssid); |
| |
| /* FIXME: check return value */ |
| ret = ath10k_vdev_start(arvif); |
| } |
| |
| /* |
| * Mac80211 does not keep IBSS bssid when leaving IBSS, |
| * so driver need to store it. It is needed when leaving |
| * IBSS in order to remove BSSID peer. |
| */ |
| if (vif->type == NL80211_IFTYPE_ADHOC) |
| memcpy(arvif->u.ibss.bssid, info->bssid, |
| ETH_ALEN); |
| } |
| } |
| |
| if (changed & BSS_CHANGED_BEACON_ENABLED) |
| ath10k_control_beaconing(arvif, info); |
| |
| if (changed & BSS_CHANGED_ERP_CTS_PROT) { |
| u32 cts_prot; |
| if (info->use_cts_prot) |
| cts_prot = 1; |
| else |
| cts_prot = 0; |
| |
| ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d cts_prot %d\n", |
| arvif->vdev_id, cts_prot); |
| |
| vdev_param = ar->wmi.vdev_param->enable_rtscts; |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, |
| cts_prot); |
| if (ret) |
| ath10k_warn("Failed to set CTS prot for VDEV: %d\n", |
| arvif->vdev_id); |
| } |
| |
| if (changed & BSS_CHANGED_ERP_SLOT) { |
| u32 slottime; |
| if (info->use_short_slot) |
| slottime = WMI_VDEV_SLOT_TIME_SHORT; /* 9us */ |
| |
| else |
| slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */ |
| |
| ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d slot_time %d\n", |
| arvif->vdev_id, slottime); |
| |
| vdev_param = ar->wmi.vdev_param->slot_time; |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, |
| slottime); |
| if (ret) |
| ath10k_warn("Failed to set erp slot for VDEV: %d\n", |
| arvif->vdev_id); |
| } |
| |
| if (changed & BSS_CHANGED_ERP_PREAMBLE) { |
| u32 preamble; |
| if (info->use_short_preamble) |
| preamble = WMI_VDEV_PREAMBLE_SHORT; |
| else |
| preamble = WMI_VDEV_PREAMBLE_LONG; |
| |
| ath10k_dbg(ATH10K_DBG_MAC, |
| "mac vdev %d preamble %dn", |
| arvif->vdev_id, preamble); |
| |
| vdev_param = ar->wmi.vdev_param->preamble; |
| ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, |
| preamble); |
| if (ret) |
| ath10k_warn("Failed to set preamble for VDEV: %d\n", |
| arvif->vdev_id); |
| } |
| |
| if (changed & BSS_CHANGED_ASSOC) { |
| if (info->assoc) |
| ath10k_bss_assoc(hw, vif, info); |
| } |
| |
| mutex_unlock(&ar->conf_mutex); |
| } |
| |
| static int ath10k_hw_scan(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct cfg80211_scan_request *req) |
| { |
| struct ath10k *ar = hw->priv; |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| struct wmi_start_scan_arg arg; |
| int ret = 0; |
| int i; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| spin_lock_bh(&ar->data_lock); |
| if (ar->scan.in_progress) { |
| spin_unlock_bh(&ar->data_lock); |
| ret = -EBUSY; |
| goto exit; |
| } |
| |
| reinit_completion(&ar->scan.started); |
| reinit_completion(&ar->scan.completed); |
| ar->scan.in_progress = true; |
| ar->scan.aborting = false; |
| ar->scan.is_roc = false; |
| ar->scan.vdev_id = arvif->vdev_id; |
| spin_unlock_bh(&ar->data_lock); |
| |
| memset(&arg, 0, sizeof(arg)); |
| ath10k_wmi_start_scan_init(ar, &arg); |
| arg.vdev_id = arvif->vdev_id; |
| arg.scan_id = ATH10K_SCAN_ID; |
| |
| if (!req->no_cck) |
| arg.scan_ctrl_flags |= WMI_SCAN_ADD_CCK_RATES; |
| |
| if (req->ie_len) { |
| arg.ie_len = req->ie_len; |
| memcpy(arg.ie, req->ie, arg.ie_len); |
| } |
| |
| if (req->n_ssids) { |
| arg.n_ssids = req->n_ssids; |
| for (i = 0; i < arg.n_ssids; i++) { |
| arg.ssids[i].len = req->ssids[i].ssid_len; |
| arg.ssids[i].ssid = req->ssids[i].ssid; |
| } |
| } else { |
| arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE; |
| } |
| |
| if (req->n_channels) { |
| arg.n_channels = req->n_channels; |
| for (i = 0; i < arg.n_channels; i++) |
| arg.channels[i] = req->channels[i]->center_freq; |
| } |
| |
| ret = ath10k_start_scan(ar, &arg); |
| if (ret) { |
| ath10k_warn("could not start hw scan (%d)\n", ret); |
| spin_lock_bh(&ar->data_lock); |
| ar->scan.in_progress = false; |
| spin_unlock_bh(&ar->data_lock); |
| } |
| |
| exit: |
| mutex_unlock(&ar->conf_mutex); |
| return ret; |
| } |
| |
| static void ath10k_cancel_hw_scan(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct ath10k *ar = hw->priv; |
| int ret; |
| |
| mutex_lock(&ar->conf_mutex); |
| ret = ath10k_abort_scan(ar); |
| if (ret) { |
| ath10k_warn("couldn't abort scan (%d). forcefully sending scan completion to mac80211\n", |
| ret); |
| ieee80211_scan_completed(hw, 1 /* aborted */); |
| } |
| mutex_unlock(&ar->conf_mutex); |
| } |
| |
| static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, |
| struct ieee80211_vif *vif, struct ieee80211_sta *sta, |
| struct ieee80211_key_conf *key) |
| { |
| struct ath10k *ar = hw->priv; |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| struct ath10k_peer *peer; |
| const u8 *peer_addr; |
| bool is_wep = key->cipher == WLAN_CIPHER_SUITE_WEP40 || |
| key->cipher == WLAN_CIPHER_SUITE_WEP104; |
| int ret = 0; |
| |
| if (key->keyidx > WMI_MAX_KEY_INDEX) |
| return -ENOSPC; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| if (sta) |
| peer_addr = sta->addr; |
| else if (arvif->vdev_type == WMI_VDEV_TYPE_STA) |
| peer_addr = vif->bss_conf.bssid; |
| else |
| peer_addr = vif->addr; |
| |
| key->hw_key_idx = key->keyidx; |
| |
| /* the peer should not disappear in mid-way (unless FW goes awry) since |
| * we already hold conf_mutex. we just make sure its there now. */ |
| spin_lock_bh(&ar->data_lock); |
| peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr); |
| spin_unlock_bh(&ar->data_lock); |
| |
| if (!peer) { |
| if (cmd == SET_KEY) { |
| ath10k_warn("cannot install key for non-existent peer %pM\n", |
| peer_addr); |
| ret = -EOPNOTSUPP; |
| goto exit; |
| } else { |
| /* if the peer doesn't exist there is no key to disable |
| * anymore */ |
| goto exit; |
| } |
| } |
| |
| if (is_wep) { |
| if (cmd == SET_KEY) |
| arvif->wep_keys[key->keyidx] = key; |
| else |
| arvif->wep_keys[key->keyidx] = NULL; |
| |
| if (cmd == DISABLE_KEY) |
| ath10k_clear_vdev_key(arvif, key); |
| } |
| |
| ret = ath10k_install_key(arvif, key, cmd, peer_addr); |
| if (ret) { |
| ath10k_warn("ath10k_install_key failed (%d)\n", ret); |
| goto exit; |
| } |
| |
| spin_lock_bh(&ar->data_lock); |
| peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr); |
| if (peer && cmd == SET_KEY) |
| peer->keys[key->keyidx] = key; |
| else if (peer && cmd == DISABLE_KEY) |
| peer->keys[key->keyidx] = NULL; |
| else if (peer == NULL) |
| /* impossible unless FW goes crazy */ |
| ath10k_warn("peer %pM disappeared!\n", peer_addr); |
| spin_unlock_bh(&ar->data_lock); |
| |
| exit: |
| mutex_unlock(&ar->conf_mutex); |
| return ret; |
| } |
| |
| static int ath10k_sta_state(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_sta *sta, |
| enum ieee80211_sta_state old_state, |
| enum ieee80211_sta_state new_state) |
| { |
| struct ath10k *ar = hw->priv; |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| int ret = 0; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| if (old_state == IEEE80211_STA_NOTEXIST && |
| new_state == IEEE80211_STA_NONE && |
| vif->type != NL80211_IFTYPE_STATION) { |
| /* |
| * New station addition. |
| */ |
| ath10k_dbg(ATH10K_DBG_MAC, |
| "mac vdev %d peer create %pM (new sta)\n", |
| arvif->vdev_id, sta->addr); |
| |
| ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr); |
| if (ret) |
| ath10k_warn("Failed to add peer: %pM for VDEV: %d\n", |
| sta->addr, arvif->vdev_id); |
| } else if ((old_state == IEEE80211_STA_NONE && |
| new_state == IEEE80211_STA_NOTEXIST)) { |
| /* |
| * Existing station deletion. |
| */ |
| ath10k_dbg(ATH10K_DBG_MAC, |
| "mac vdev %d peer delete %pM (sta gone)\n", |
| arvif->vdev_id, sta->addr); |
| ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr); |
| if (ret) |
| ath10k_warn("Failed to delete peer: %pM for VDEV: %d\n", |
| sta->addr, arvif->vdev_id); |
| |
| if (vif->type == NL80211_IFTYPE_STATION) |
| ath10k_bss_disassoc(hw, vif); |
| } else if (old_state == IEEE80211_STA_AUTH && |
| new_state == IEEE80211_STA_ASSOC && |
| (vif->type == NL80211_IFTYPE_AP || |
| vif->type == NL80211_IFTYPE_ADHOC)) { |
| /* |
| * New association. |
| */ |
| ath10k_dbg(ATH10K_DBG_MAC, "mac sta %pM associated\n", |
| sta->addr); |
| |
| ret = ath10k_station_assoc(ar, arvif, sta); |
| if (ret) |
| ath10k_warn("Failed to associate station: %pM\n", |
| sta->addr); |
| } else if (old_state == IEEE80211_STA_ASSOC && |
| new_state == IEEE80211_STA_AUTH && |
| (vif->type == NL80211_IFTYPE_AP || |
| vif->type == NL80211_IFTYPE_ADHOC)) { |
| /* |
| * Disassociation. |
| */ |
| ath10k_dbg(ATH10K_DBG_MAC, "mac sta %pM disassociated\n", |
| sta->addr); |
| |
| ret = ath10k_station_disassoc(ar, arvif, sta); |
| if (ret) |
| ath10k_warn("Failed to disassociate station: %pM\n", |
| sta->addr); |
| } |
| |
| mutex_unlock(&ar->conf_mutex); |
| return ret; |
| } |
| |
| static int ath10k_conf_tx_uapsd(struct ath10k *ar, struct ieee80211_vif *vif, |
| u16 ac, bool enable) |
| { |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| u32 value = 0; |
| int ret = 0; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| if (arvif->vdev_type != WMI_VDEV_TYPE_STA) |
| return 0; |
| |
| switch (ac) { |
| case IEEE80211_AC_VO: |
| value = WMI_STA_PS_UAPSD_AC3_DELIVERY_EN | |
| WMI_STA_PS_UAPSD_AC3_TRIGGER_EN; |
| break; |
| case IEEE80211_AC_VI: |
| value = WMI_STA_PS_UAPSD_AC2_DELIVERY_EN | |
| WMI_STA_PS_UAPSD_AC2_TRIGGER_EN; |
| break; |
| case IEEE80211_AC_BE: |
| value = WMI_STA_PS_UAPSD_AC1_DELIVERY_EN | |
| WMI_STA_PS_UAPSD_AC1_TRIGGER_EN; |
| break; |
| case IEEE80211_AC_BK: |
| value = WMI_STA_PS_UAPSD_AC0_DELIVERY_EN | |
| WMI_STA_PS_UAPSD_AC0_TRIGGER_EN; |
| break; |
| } |
| |
| if (enable) |
| arvif->u.sta.uapsd |= value; |
| else |
| arvif->u.sta.uapsd &= ~value; |
| |
| ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, |
| WMI_STA_PS_PARAM_UAPSD, |
| arvif->u.sta.uapsd); |
| if (ret) { |
| ath10k_warn("could not set uapsd params %d\n", ret); |
| goto exit; |
| } |
| |
| if (arvif->u.sta.uapsd) |
| value = WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD; |
| else |
| value = WMI_STA_PS_RX_WAKE_POLICY_WAKE; |
| |
| ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, |
| WMI_STA_PS_PARAM_RX_WAKE_POLICY, |
| value); |
| if (ret) |
| ath10k_warn("could not set rx wake param %d\n", ret); |
| |
| exit: |
| return ret; |
| } |
| |
| static int ath10k_conf_tx(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, u16 ac, |
| const struct ieee80211_tx_queue_params *params) |
| { |
| struct ath10k *ar = hw->priv; |
| struct wmi_wmm_params_arg *p = NULL; |
| int ret; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| switch (ac) { |
| case IEEE80211_AC_VO: |
| p = &ar->wmm_params.ac_vo; |
| break; |
| case IEEE80211_AC_VI: |
| p = &ar->wmm_params.ac_vi; |
| break; |
| case IEEE80211_AC_BE: |
| p = &ar->wmm_params.ac_be; |
| break; |
| case IEEE80211_AC_BK: |
| p = &ar->wmm_params.ac_bk; |
| break; |
| } |
| |
| if (WARN_ON(!p)) { |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| p->cwmin = params->cw_min; |
| p->cwmax = params->cw_max; |
| p->aifs = params->aifs; |
| |
| /* |
| * The channel time duration programmed in the HW is in absolute |
| * microseconds, while mac80211 gives the txop in units of |
| * 32 microseconds. |
| */ |
| p->txop = params->txop * 32; |
| |
| /* FIXME: FW accepts wmm params per hw, not per vif */ |
| ret = ath10k_wmi_pdev_set_wmm_params(ar, &ar->wmm_params); |
| if (ret) { |
| ath10k_warn("could not set wmm params %d\n", ret); |
| goto exit; |
| } |
| |
| ret = ath10k_conf_tx_uapsd(ar, vif, ac, params->uapsd); |
| if (ret) |
| ath10k_warn("could not set sta uapsd %d\n", ret); |
| |
| exit: |
| mutex_unlock(&ar->conf_mutex); |
| return ret; |
| } |
| |
| #define ATH10K_ROC_TIMEOUT_HZ (2*HZ) |
| |
| static int ath10k_remain_on_channel(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_channel *chan, |
| int duration, |
| enum ieee80211_roc_type type) |
| { |
| struct ath10k *ar = hw->priv; |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| struct wmi_start_scan_arg arg; |
| int ret; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| spin_lock_bh(&ar->data_lock); |
| if (ar->scan.in_progress) { |
| spin_unlock_bh(&ar->data_lock); |
| ret = -EBUSY; |
| goto exit; |
| } |
| |
| reinit_completion(&ar->scan.started); |
| reinit_completion(&ar->scan.completed); |
| reinit_completion(&ar->scan.on_channel); |
| ar->scan.in_progress = true; |
| ar->scan.aborting = false; |
| ar->scan.is_roc = true; |
| ar->scan.vdev_id = arvif->vdev_id; |
| ar->scan.roc_freq = chan->center_freq; |
| spin_unlock_bh(&ar->data_lock); |
| |
| memset(&arg, 0, sizeof(arg)); |
| ath10k_wmi_start_scan_init(ar, &arg); |
| arg.vdev_id = arvif->vdev_id; |
| arg.scan_id = ATH10K_SCAN_ID; |
| arg.n_channels = 1; |
| arg.channels[0] = chan->center_freq; |
| arg.dwell_time_active = duration; |
| arg.dwell_time_passive = duration; |
| arg.max_scan_time = 2 * duration; |
| arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE; |
| arg.scan_ctrl_flags |= WMI_SCAN_FILTER_PROBE_REQ; |
| |
| ret = ath10k_start_scan(ar, &arg); |
| if (ret) { |
| ath10k_warn("could not start roc scan (%d)\n", ret); |
| spin_lock_bh(&ar->data_lock); |
| ar->scan.in_progress = false; |
| spin_unlock_bh(&ar->data_lock); |
| goto exit; |
| } |
| |
| ret = wait_for_completion_timeout(&ar->scan.on_channel, 3*HZ); |
| if (ret == 0) { |
| ath10k_warn("could not switch to channel for roc scan\n"); |
| ath10k_abort_scan(ar); |
| ret = -ETIMEDOUT; |
| goto exit; |
| } |
| |
| ret = 0; |
| exit: |
| mutex_unlock(&ar->conf_mutex); |
| return ret; |
| } |
| |
| static int ath10k_cancel_remain_on_channel(struct ieee80211_hw *hw) |
| { |
| struct ath10k *ar = hw->priv; |
| |
| mutex_lock(&ar->conf_mutex); |
| ath10k_abort_scan(ar); |
| mutex_unlock(&ar->conf_mutex); |
| |
| return 0; |
| } |
| |
| /* |
| * Both RTS and Fragmentation threshold are interface-specific |
| * in ath10k, but device-specific in mac80211. |
| */ |
| |
| static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value) |
| { |
| struct ath10k *ar = hw->priv; |
| struct ath10k_vif *arvif; |
| int ret = 0; |
| |
| mutex_lock(&ar->conf_mutex); |
| list_for_each_entry(arvif, &ar->arvifs, list) { |
| ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d rts threshold %d\n", |
| arvif->vdev_id, value); |
| |
| ret = ath10k_mac_set_rts(arvif, value); |
| if (ret) { |
| ath10k_warn("could not set rts threshold for vdev %d (%d)\n", |
| arvif->vdev_id, ret); |
| break; |
| } |
| } |
| mutex_unlock(&ar->conf_mutex); |
| |
| return ret; |
| } |
| |
| static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value) |
| { |
| struct ath10k *ar = hw->priv; |
| struct ath10k_vif *arvif; |
| int ret = 0; |
| |
| mutex_lock(&ar->conf_mutex); |
| list_for_each_entry(arvif, &ar->arvifs, list) { |
| ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d fragmentation threshold %d\n", |
| arvif->vdev_id, value); |
| |
| ret = ath10k_mac_set_rts(arvif, value); |
| if (ret) { |
| ath10k_warn("could not set fragmentation threshold for vdev %d (%d)\n", |
| arvif->vdev_id, ret); |
| break; |
| } |
| } |
| mutex_unlock(&ar->conf_mutex); |
| |
| return ret; |
| } |
| |
| static void ath10k_flush(struct ieee80211_hw *hw, u32 queues, bool drop) |
| { |
| struct ath10k *ar = hw->priv; |
| bool skip; |
| int ret; |
| |
| /* mac80211 doesn't care if we really xmit queued frames or not |
| * we'll collect those frames either way if we stop/delete vdevs */ |
| if (drop) |
| return; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| if (ar->state == ATH10K_STATE_WEDGED) |
| goto skip; |
| |
| ret = wait_event_timeout(ar->htt.empty_tx_wq, ({ |
| bool empty; |
| |
| spin_lock_bh(&ar->htt.tx_lock); |
| empty = (ar->htt.num_pending_tx == 0); |
| spin_unlock_bh(&ar->htt.tx_lock); |
| |
| skip = (ar->state == ATH10K_STATE_WEDGED); |
| |
| (empty || skip); |
| }), ATH10K_FLUSH_TIMEOUT_HZ); |
| |
| if (ret <= 0 || skip) |
| ath10k_warn("tx not flushed\n"); |
| |
| skip: |
| mutex_unlock(&ar->conf_mutex); |
| } |
| |
| /* TODO: Implement this function properly |
| * For now it is needed to reply to Probe Requests in IBSS mode. |
| * Propably we need this information from FW. |
| */ |
| static int ath10k_tx_last_beacon(struct ieee80211_hw *hw) |
| { |
| return 1; |
| } |
| |
| #ifdef CONFIG_PM |
| static int ath10k_suspend(struct ieee80211_hw *hw, |
| struct cfg80211_wowlan *wowlan) |
| { |
| struct ath10k *ar = hw->priv; |
| int ret; |
| |
| ar->is_target_paused = false; |
| |
| ret = ath10k_wmi_pdev_suspend_target(ar); |
| if (ret) { |
| ath10k_warn("could not suspend target (%d)\n", ret); |
| return 1; |
| } |
| |
| ret = wait_event_interruptible_timeout(ar->event_queue, |
| ar->is_target_paused == true, |
| 1 * HZ); |
| if (ret < 0) { |
| ath10k_warn("suspend interrupted (%d)\n", ret); |
| goto resume; |
| } else if (ret == 0) { |
| ath10k_warn("suspend timed out - target pause event never came\n"); |
| goto resume; |
| } |
| |
| ret = ath10k_hif_suspend(ar); |
| if (ret) { |
| ath10k_warn("could not suspend hif (%d)\n", ret); |
| goto resume; |
| } |
| |
| return 0; |
| resume: |
| ret = ath10k_wmi_pdev_resume_target(ar); |
| if (ret) |
| ath10k_warn("could not resume target (%d)\n", ret); |
| return 1; |
| } |
| |
| static int ath10k_resume(struct ieee80211_hw *hw) |
| { |
| struct ath10k *ar = hw->priv; |
| int ret; |
| |
| ret = ath10k_hif_resume(ar); |
| if (ret) { |
| ath10k_warn("could not resume hif (%d)\n", ret); |
| return 1; |
| } |
| |
| ret = ath10k_wmi_pdev_resume_target(ar); |
| if (ret) { |
| ath10k_warn("could not resume target (%d)\n", ret); |
| return 1; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static void ath10k_restart_complete(struct ieee80211_hw *hw) |
| { |
| struct ath10k *ar = hw->priv; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| /* If device failed to restart it will be in a different state, e.g. |
| * ATH10K_STATE_WEDGED */ |
| if (ar->state == ATH10K_STATE_RESTARTED) { |
| ath10k_info("device successfully recovered\n"); |
| ar->state = ATH10K_STATE_ON; |
| } |
| |
| mutex_unlock(&ar->conf_mutex); |
| } |
| |
| static int ath10k_get_survey(struct ieee80211_hw *hw, int idx, |
| struct survey_info *survey) |
| { |
| struct ath10k *ar = hw->priv; |
| struct ieee80211_supported_band *sband; |
| struct survey_info *ar_survey = &ar->survey[idx]; |
| int ret = 0; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| sband = hw->wiphy->bands[IEEE80211_BAND_2GHZ]; |
| if (sband && idx >= sband->n_channels) { |
| idx -= sband->n_channels; |
| sband = NULL; |
| } |
| |
| if (!sband) |
| sband = hw->wiphy->bands[IEEE80211_BAND_5GHZ]; |
| |
| if (!sband || idx >= sband->n_channels) { |
| ret = -ENOENT; |
| goto exit; |
| } |
| |
| spin_lock_bh(&ar->data_lock); |
| memcpy(survey, ar_survey, sizeof(*survey)); |
| spin_unlock_bh(&ar->data_lock); |
| |
| survey->channel = &sband->channels[idx]; |
| |
| exit: |
| mutex_unlock(&ar->conf_mutex); |
| return ret; |
| } |
| |
| static const struct ieee80211_ops ath10k_ops = { |
| .tx = ath10k_tx, |
| .start = ath10k_start, |
| .stop = ath10k_stop, |
| .config = ath10k_config, |
| .add_interface = ath10k_add_interface, |
| .remove_interface = ath10k_remove_interface, |
| .configure_filter = ath10k_configure_filter, |
| .bss_info_changed = ath10k_bss_info_changed, |
| .hw_scan = ath10k_hw_scan, |
| .cancel_hw_scan = ath10k_cancel_hw_scan, |
| .set_key = ath10k_set_key, |
| .sta_state = ath10k_sta_state, |
| .conf_tx = ath10k_conf_tx, |
| .remain_on_channel = ath10k_remain_on_channel, |
| .cancel_remain_on_channel = ath10k_cancel_remain_on_channel, |
| .set_rts_threshold = ath10k_set_rts_threshold, |
| .set_frag_threshold = ath10k_set_frag_threshold, |
| .flush = ath10k_flush, |
| .tx_last_beacon = ath10k_tx_last_beacon, |
| .restart_complete = ath10k_restart_complete, |
| .get_survey = ath10k_get_survey, |
| #ifdef CONFIG_PM |
| .suspend = ath10k_suspend, |
| .resume = ath10k_resume, |
| #endif |
| }; |
| |
| #define RATETAB_ENT(_rate, _rateid, _flags) { \ |
| .bitrate = (_rate), \ |
| .flags = (_flags), \ |
| .hw_value = (_rateid), \ |
| } |
| |
| #define CHAN2G(_channel, _freq, _flags) { \ |
| .band = IEEE80211_BAND_2GHZ, \ |
| .hw_value = (_channel), \ |
| .center_freq = (_freq), \ |
| .flags = (_flags), \ |
| .max_antenna_gain = 0, \ |
| .max_power = 30, \ |
| } |
| |
| #define CHAN5G(_channel, _freq, _flags) { \ |
| .band = IEEE80211_BAND_5GHZ, \ |
| .hw_value = (_channel), \ |
| .center_freq = (_freq), \ |
| .flags = (_flags), \ |
| .max_antenna_gain = 0, \ |
| .max_power = 30, \ |
| } |
| |
| static const struct ieee80211_channel ath10k_2ghz_channels[] = { |
| CHAN2G(1, 2412, 0), |
| CHAN2G(2, 2417, 0), |
| CHAN2G(3, 2422, 0), |
| CHAN2G(4, 2427, 0), |
| CHAN2G(5, 2432, 0), |
| CHAN2G(6, 2437, 0), |
| CHAN2G(7, 2442, 0), |
| CHAN2G(8, 2447, 0), |
| CHAN2G(9, 2452, 0), |
| CHAN2G(10, 2457, 0), |
| CHAN2G(11, 2462, 0), |
| CHAN2G(12, 2467, 0), |
| CHAN2G(13, 2472, 0), |
| CHAN2G(14, 2484, 0), |
| }; |
| |
| static const struct ieee80211_channel ath10k_5ghz_channels[] = { |
| CHAN5G(36, 5180, 0), |
| CHAN5G(40, 5200, 0), |
| CHAN5G(44, 5220, 0), |
| CHAN5G(48, 5240, 0), |
| CHAN5G(52, 5260, 0), |
| CHAN5G(56, 5280, 0), |
| CHAN5G(60, 5300, 0), |
| CHAN5G(64, 5320, 0), |
| CHAN5G(100, 5500, 0), |
| CHAN5G(104, 5520, 0), |
| CHAN5G(108, 5540, 0), |
| CHAN5G(112, 5560, 0), |
| CHAN5G(116, 5580, 0), |
| CHAN5G(120, 5600, 0), |
| CHAN5G(124, 5620, 0), |
| CHAN5G(128, 5640, 0), |
| CHAN5G(132, 5660, 0), |
| CHAN5G(136, 5680, 0), |
| CHAN5G(140, 5700, 0), |
| CHAN5G(149, 5745, 0), |
| CHAN5G(153, 5765, 0), |
| CHAN5G(157, 5785, 0), |
| CHAN5G(161, 5805, 0), |
| CHAN5G(165, 5825, 0), |
| }; |
| |
| static struct ieee80211_rate ath10k_rates[] = { |
| /* CCK */ |
| RATETAB_ENT(10, 0x82, 0), |
| RATETAB_ENT(20, 0x84, 0), |
| RATETAB_ENT(55, 0x8b, 0), |
| RATETAB_ENT(110, 0x96, 0), |
| /* OFDM */ |
| RATETAB_ENT(60, 0x0c, 0), |
| RATETAB_ENT(90, 0x12, 0), |
| RATETAB_ENT(120, 0x18, 0), |
| RATETAB_ENT(180, 0x24, 0), |
| RATETAB_ENT(240, 0x30, 0), |
| RATETAB_ENT(360, 0x48, 0), |
| RATETAB_ENT(480, 0x60, 0), |
| RATETAB_ENT(540, 0x6c, 0), |
| }; |
| |
| #define ath10k_a_rates (ath10k_rates + 4) |
| #define ath10k_a_rates_size (ARRAY_SIZE(ath10k_rates) - 4) |
| #define ath10k_g_rates (ath10k_rates + 0) |
| #define ath10k_g_rates_size (ARRAY_SIZE(ath10k_rates)) |
| |
| struct ath10k *ath10k_mac_create(void) |
| { |
| struct ieee80211_hw *hw; |
| struct ath10k *ar; |
| |
| hw = ieee80211_alloc_hw(sizeof(struct ath10k), &ath10k_ops); |
| if (!hw) |
| return NULL; |
| |
| ar = hw->priv; |
| ar->hw = hw; |
| |
| return ar; |
| } |
| |
| void ath10k_mac_destroy(struct ath10k *ar) |
| { |
| ieee80211_free_hw(ar->hw); |
| } |
| |
| static const struct ieee80211_iface_limit ath10k_if_limits[] = { |
| { |
| .max = 8, |
| .types = BIT(NL80211_IFTYPE_STATION) |
| | BIT(NL80211_IFTYPE_P2P_CLIENT) |
| }, |
| { |
| .max = 3, |
| .types = BIT(NL80211_IFTYPE_P2P_GO) |
| }, |
| { |
| .max = 7, |
| .types = BIT(NL80211_IFTYPE_AP) |
| }, |
| }; |
| |
| static const struct ieee80211_iface_combination ath10k_if_comb = { |
| .limits = ath10k_if_limits, |
| .n_limits = ARRAY_SIZE(ath10k_if_limits), |
| .max_interfaces = 8, |
| .num_different_channels = 1, |
| .beacon_int_infra_match = true, |
| }; |
| |
| static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar) |
| { |
| struct ieee80211_sta_vht_cap vht_cap = {0}; |
| u16 mcs_map; |
| int i; |
| |
| vht_cap.vht_supported = 1; |
| vht_cap.cap = ar->vht_cap_info; |
| |
| mcs_map = 0; |
| for (i = 0; i < 8; i++) { |
| if (i < ar->num_rf_chains) |
| mcs_map |= IEEE80211_VHT_MCS_SUPPORT_0_9 << (i*2); |
| else |
| mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << (i*2); |
| } |
| |
| vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map); |
| vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map); |
| |
| return vht_cap; |
| } |
| |
| static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar) |
| { |
| int i; |
| struct ieee80211_sta_ht_cap ht_cap = {0}; |
| |
| if (!(ar->ht_cap_info & WMI_HT_CAP_ENABLED)) |
| return ht_cap; |
| |
| ht_cap.ht_supported = 1; |
| ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; |
| ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8; |
| ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40; |
| ht_cap.cap |= WLAN_HT_CAP_SM_PS_STATIC << IEEE80211_HT_CAP_SM_PS_SHIFT; |
| |
| if (ar->ht_cap_info & WMI_HT_CAP_HT20_SGI) |
| ht_cap.cap |= IEEE80211_HT_CAP_SGI_20; |
| |
| if (ar->ht_cap_info & WMI_HT_CAP_HT40_SGI) |
| ht_cap.cap |= IEEE80211_HT_CAP_SGI_40; |
| |
| if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) { |
| u32 smps; |
| |
| smps = WLAN_HT_CAP_SM_PS_DYNAMIC; |
| smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT; |
| |
| ht_cap.cap |= smps; |
| } |
| |
| if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC) |
| ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC; |
| |
| if (ar->ht_cap_info & WMI_HT_CAP_RX_STBC) { |
| u32 stbc; |
| |
| stbc = ar->ht_cap_info; |
| stbc &= WMI_HT_CAP_RX_STBC; |
| stbc >>= WMI_HT_CAP_RX_STBC_MASK_SHIFT; |
| stbc <<= IEEE80211_HT_CAP_RX_STBC_SHIFT; |
| stbc &= IEEE80211_HT_CAP_RX_STBC; |
| |
| ht_cap.cap |= stbc; |
| } |
| |
| if (ar->ht_cap_info & WMI_HT_CAP_LDPC) |
| ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING; |
| |
| if (ar->ht_cap_info & WMI_HT_CAP_L_SIG_TXOP_PROT) |
| ht_cap.cap |= IEEE80211_HT_CAP_LSIG_TXOP_PROT; |
| |
| /* max AMSDU is implicitly taken from vht_cap_info */ |
| if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK) |
| ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU; |
| |
| for (i = 0; i < ar->num_rf_chains; i++) |
| ht_cap.mcs.rx_mask[i] = 0xFF; |
| |
| ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED; |
| |
| return ht_cap; |
| } |
| |
| |
| static void ath10k_get_arvif_iter(void *data, u8 *mac, |
| struct ieee80211_vif *vif) |
| { |
| struct ath10k_vif_iter *arvif_iter = data; |
| struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| |
| if (arvif->vdev_id == arvif_iter->vdev_id) |
| arvif_iter->arvif = arvif; |
| } |
| |
| struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id) |
| { |
| struct ath10k_vif_iter arvif_iter; |
| u32 flags; |
| |
| memset(&arvif_iter, 0, sizeof(struct ath10k_vif_iter)); |
| arvif_iter.vdev_id = vdev_id; |
| |
| flags = IEEE80211_IFACE_ITER_RESUME_ALL; |
| ieee80211_iterate_active_interfaces_atomic(ar->hw, |
| flags, |
| ath10k_get_arvif_iter, |
| &arvif_iter); |
| if (!arvif_iter.arvif) { |
| ath10k_warn("No VIF found for VDEV: %d\n", vdev_id); |
| return NULL; |
| } |
| |
| return arvif_iter.arvif; |
| } |
| |
| int ath10k_mac_register(struct ath10k *ar) |
| { |
| struct ieee80211_supported_band *band; |
| struct ieee80211_sta_vht_cap vht_cap; |
| struct ieee80211_sta_ht_cap ht_cap; |
| void *channels; |
| int ret; |
| |
| SET_IEEE80211_PERM_ADDR(ar->hw, ar->mac_addr); |
| |
| SET_IEEE80211_DEV(ar->hw, ar->dev); |
| |
| ht_cap = ath10k_get_ht_cap(ar); |
| vht_cap = ath10k_create_vht_cap(ar); |
| |
| if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) { |
| channels = kmemdup(ath10k_2ghz_channels, |
| sizeof(ath10k_2ghz_channels), |
| GFP_KERNEL); |
| if (!channels) { |
| ret = -ENOMEM; |
| goto err_free; |
| } |
| |
| band = &ar->mac.sbands[IEEE80211_BAND_2GHZ]; |
| band->n_channels = ARRAY_SIZE(ath10k_2ghz_channels); |
| band->channels = channels; |
| band->n_bitrates = ath10k_g_rates_size; |
| band->bitrates = ath10k_g_rates; |
| band->ht_cap = ht_cap; |
| |
| /* vht is not supported in 2.4 GHz */ |
| |
| ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band; |
| } |
| |
| if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) { |
| channels = kmemdup(ath10k_5ghz_channels, |
| sizeof(ath10k_5ghz_channels), |
| GFP_KERNEL); |
| if (!channels) { |
| ret = -ENOMEM; |
| goto err_free; |
| } |
| |
| band = &ar->mac.sbands[IEEE80211_BAND_5GHZ]; |
| band->n_channels = ARRAY_SIZE(ath10k_5ghz_channels); |
| band->channels = channels; |
| band->n_bitrates = ath10k_a_rates_size; |
| band->bitrates = ath10k_a_rates; |
| band->ht_cap = ht_cap; |
| band->vht_cap = vht_cap; |
| ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = band; |
| } |
| |
| ar->hw->wiphy->interface_modes = |
| BIT(NL80211_IFTYPE_STATION) | |
| BIT(NL80211_IFTYPE_ADHOC) | |
| BIT(NL80211_IFTYPE_AP) | |
| BIT(NL80211_IFTYPE_P2P_CLIENT) | |
| BIT(NL80211_IFTYPE_P2P_GO); |
| |
| ar->hw->flags = IEEE80211_HW_SIGNAL_DBM | |
| IEEE80211_HW_SUPPORTS_PS | |
| IEEE80211_HW_SUPPORTS_DYNAMIC_PS | |
| IEEE80211_HW_SUPPORTS_UAPSD | |
| IEEE80211_HW_MFP_CAPABLE | |
| IEEE80211_HW_REPORTS_TX_ACK_STATUS | |
| IEEE80211_HW_HAS_RATE_CONTROL | |
| IEEE80211_HW_SUPPORTS_STATIC_SMPS | |
| IEEE80211_HW_WANT_MONITOR_VIF | |
| IEEE80211_HW_AP_LINK_PS; |
| |
| /* MSDU can have HTT TX fragment pushed in front. The additional 4 |
| * bytes is used for padding/alignment if necessary. */ |
| ar->hw->extra_tx_headroom += sizeof(struct htt_data_tx_desc_frag)*2 + 4; |
| |
| if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) |
| ar->hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS; |
| |
| if (ar->ht_cap_info & WMI_HT_CAP_ENABLED) { |
| ar->hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION; |
| ar->hw->flags |= IEEE80211_HW_TX_AMPDU_SETUP_IN_HW; |
| } |
| |
| ar->hw->wiphy->max_scan_ssids = WLAN_SCAN_PARAMS_MAX_SSID; |
| ar->hw->wiphy->max_scan_ie_len = WLAN_SCAN_PARAMS_MAX_IE_LEN; |
| |
| ar->hw->vif_data_size = sizeof(struct ath10k_vif); |
| |
| ar->hw->channel_change_time = 5000; |
| ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL; |
| |
| ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; |
| ar->hw->wiphy->max_remain_on_channel_duration = 5000; |
| |
| ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD; |
| /* |
| * on LL hardware queues are managed entirely by the FW |
| * so we only advertise to mac we can do the queues thing |
| */ |
| ar->hw->queues = 4; |
| |
| ar->hw->wiphy->iface_combinations = &ath10k_if_comb; |
| ar->hw->wiphy->n_iface_combinations = 1; |
| |
| ar->hw->netdev_features = NETIF_F_HW_CSUM; |
| |
| ret = ath_regd_init(&ar->ath_common.regulatory, ar->hw->wiphy, |
| ath10k_reg_notifier); |
| if (ret) { |
| ath10k_err("Regulatory initialization failed\n"); |
| goto err_free; |
| } |
| |
| ret = ieee80211_register_hw(ar->hw); |
| if (ret) { |
| ath10k_err("ieee80211 registration failed: %d\n", ret); |
| goto err_free; |
| } |
| |
| if (!ath_is_world_regd(&ar->ath_common.regulatory)) { |
| ret = regulatory_hint(ar->hw->wiphy, |
| ar->ath_common.regulatory.alpha2); |
| if (ret) |
| goto err_unregister; |
| } |
| |
| return 0; |
| |
| err_unregister: |
| ieee80211_unregister_hw(ar->hw); |
| err_free: |
| kfree(ar->mac.sbands[IEEE80211_BAND_2GHZ].channels); |
| kfree(ar->mac.sbands[IEEE80211_BAND_5GHZ].channels); |
| |
| return ret; |
| } |
| |
| void ath10k_mac_unregister(struct ath10k *ar) |
| { |
| ieee80211_unregister_hw(ar->hw); |
| |
| kfree(ar->mac.sbands[IEEE80211_BAND_2GHZ].channels); |
| kfree(ar->mac.sbands[IEEE80211_BAND_5GHZ].channels); |
| |
| SET_IEEE80211_DEV(ar->hw, NULL); |
| } |