drivers/net/wireless/b43/phy_lp.c - kernel/msm-4.19 - Gitiles

 /*

   Broadcom B43 wireless driver
   IEEE 802.11g LP-PHY driver

   Copyright (c) 2008-2009 Michael Buesch <mb@bu3sch.de>

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; see the file COPYING.  If not, write to
   the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
   Boston, MA 02110-1301, USA.

 */

 #include "b43.h"
 #include "main.h"
 #include "phy_lp.h"
 #include "phy_common.h"
 #include "tables_lpphy.h"


 static int b43_lpphy_op_allocate(struct b43_wldev *dev)
 {
 	struct b43_phy_lp *lpphy;

 	lpphy = kzalloc(sizeof(*lpphy), GFP_KERNEL);
 	if (!lpphy)
 		return -ENOMEM;
 	dev->phy.lp = lpphy;

 	return 0;
 }

 static void b43_lpphy_op_prepare_structs(struct b43_wldev *dev)
 {
 	struct b43_phy *phy = &dev->phy;
 	struct b43_phy_lp *lpphy = phy->lp;

 	memset(lpphy, 0, sizeof(*lpphy));

 	//TODO
 }

 static void b43_lpphy_op_free(struct b43_wldev *dev)
 {
 	struct b43_phy_lp *lpphy = dev->phy.lp;

 	kfree(lpphy);
 	dev->phy.lp = NULL;
 }

 static void lpphy_table_init(struct b43_wldev *dev)
 {
 	//TODO
 }

 static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
 {
 	B43_WARN_ON(1);//TODO rev < 2 not supported, yet.
 }

 static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
 {
 	struct ssb_bus *bus = dev->dev->bus;
 	struct b43_phy_lp *lpphy = dev->phy.lp;

 	b43_phy_write(dev, B43_LPPHY_AFE_DAC_CTL, 0x50);
 	b43_phy_write(dev, B43_LPPHY_AFE_CTL, 0x8800);
 	b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVR, 0);
 	b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0);
 	b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_0, 0);
 	b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_2, 0);
 	b43_phy_write(dev, B43_PHY_OFDM(0xF9), 0);
 	b43_phy_write(dev, B43_LPPHY_TR_LOOKUP_1, 0);
 	b43_phy_set(dev, B43_LPPHY_ADC_COMPENSATION_CTL, 0x10);
 	b43_phy_maskset(dev, B43_LPPHY_OFDMSYNCTHRESH0, 0xFF00, 0x78);
 	b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xF8FF, 0x200);
 	b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xFF00, 0x7F);
 	b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xFF0F, 0x40);
 	b43_phy_maskset(dev, B43_LPPHY_PREAMBLECONFIRMTO, 0xFF00, 0x2);
 	b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x4000);
 	b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x2000);
 	b43_phy_set(dev, B43_PHY_OFDM(0x10A), 0x1);
 	b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x10);
 	b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0xFF00, 0xF4);
 	b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0x00FF, 0xF100);
 	b43_phy_write(dev, B43_LPPHY_CLIPTHRESH, 0x48);
 	b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0xFF00, 0x46);
 	b43_phy_maskset(dev, B43_PHY_OFDM(0xE4), 0xFF00, 0x10);
 	b43_phy_maskset(dev, B43_LPPHY_PWR_THRESH1, 0xFFF0, 0x9);
 	b43_phy_mask(dev, B43_LPPHY_GAINDIRECTMISMATCH, ~0xF);
 	b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0x00FF, 0x5500);
 	b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xF81F, 0xA0);
 	b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xE0FF, 0x300);
 	b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0x00FF, 0x2A00);
 	if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
 		b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x2100);
 		b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xA);
 	} else {
 		b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x1E00);
 		b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xD);
 	}
 	b43_phy_maskset(dev, B43_PHY_OFDM(0xFE), 0xFFE0, 0x1F);
 	b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0xFFE0, 0xC);
 	b43_phy_maskset(dev, B43_PHY_OFDM(0x100), 0xFF00, 0x19);
 	b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0x03FF, 0x3C00);
 	b43_phy_maskset(dev, B43_PHY_OFDM(0xFE), 0xFC1F, 0x3E0);
 	b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0xFFE0, 0xC);
 	b43_phy_maskset(dev, B43_PHY_OFDM(0x100), 0x00FF, 0x1900);
 	b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0x83FF, 0x5800);
 	b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFFE0, 0x12);
 	b43_phy_maskset(dev, B43_LPPHY_GAINMISMATCH, 0x0FFF, 0x9000);

 	b43_lptab_write(dev, B43_LPTAB16(0x08, 0x14), 0);
 	b43_lptab_write(dev, B43_LPTAB16(0x08, 0x12), 0x40);

 	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
 		b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x40);
 		b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xF0FF, 0xB00);
 		b43_phy_maskset(dev, B43_LPPHY_SYNCPEAKCNT, 0xFFF8, 0x6);
 		b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0x00FF, 0x9D00);
 		b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0xFF00, 0xA1);
 	} else /* 5GHz */
 		b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x40);

 	b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0xFF00, 0xB3);
 	b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0x00FF, 0xAD00);
 	b43_phy_maskset(dev, B43_LPPHY_INPUT_PWRDB, 0xFF00, lpphy->rx_pwr_offset);
 	b43_phy_set(dev, B43_LPPHY_RESET_CTL, 0x44);
 	b43_phy_write(dev, B43_LPPHY_RESET_CTL, 0x80);
 	b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_0, 0xA954);
 	b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_1,
 		      0x2000 | ((u16)lpphy->rssi_gs << 10) |
 		      ((u16)lpphy->rssi_vc << 4) | lpphy->rssi_vf);
 }

 static void lpphy_baseband_init(struct b43_wldev *dev)
 {
 	lpphy_table_init(dev);
 	if (dev->phy.rev >= 2)
 		lpphy_baseband_rev2plus_init(dev);
 	else
 		lpphy_baseband_rev0_1_init(dev);
 }

 struct b2062_freqdata {
 	u16 freq;
 	u8 data[6];
 };

 /* Initialize the 2062 radio. */
 static void lpphy_2062_init(struct b43_wldev *dev)
 {
 	struct ssb_bus *bus = dev->dev->bus;
 	u32 crystalfreq, pdiv, tmp, ref;
 	unsigned int i;
 	const struct b2062_freqdata *fd = NULL;

 	static const struct b2062_freqdata freqdata_tab[] = {
 		{ .freq = 12000, .data[0] =  6, .data[1] =  6, .data[2] =  6,
 				 .data[3] =  6, .data[4] = 10, .data[5] =  6, },
 		{ .freq = 13000, .data[0] =  4, .data[1] =  4, .data[2] =  4,
 				 .data[3] =  4, .data[4] = 11, .data[5] =  7, },
 		{ .freq = 14400, .data[0] =  3, .data[1] =  3, .data[2] =  3,
 				 .data[3] =  3, .data[4] = 12, .data[5] =  7, },
 		{ .freq = 16200, .data[0] =  3, .data[1] =  3, .data[2] =  3,
 				 .data[3] =  3, .data[4] = 13, .data[5] =  8, },
 		{ .freq = 18000, .data[0] =  2, .data[1] =  2, .data[2] =  2,
 				 .data[3] =  2, .data[4] = 14, .data[5] =  8, },
 		{ .freq = 19200, .data[0] =  1, .data[1] =  1, .data[2] =  1,
 				 .data[3] =  1, .data[4] = 14, .data[5] =  9, },
 	};

 	b2062_upload_init_table(dev);

 	b43_radio_write(dev, B2062_N_TX_CTL3, 0);
 	b43_radio_write(dev, B2062_N_TX_CTL4, 0);
 	b43_radio_write(dev, B2062_N_TX_CTL5, 0);
 	b43_radio_write(dev, B2062_N_PDN_CTL0, 0x40);
 	b43_radio_write(dev, B2062_N_PDN_CTL0, 0);
 	b43_radio_write(dev, B2062_N_CALIB_TS, 0x10);
 	b43_radio_write(dev, B2062_N_CALIB_TS, 0);
 	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
 		b43_radio_set(dev, B2062_N_TSSI_CTL0, 0x1);
 	else
 		b43_radio_mask(dev, B2062_N_TSSI_CTL0, ~0x1);

 	/* Get the crystal freq, in Hz. */
 	crystalfreq = bus->chipco.pmu.crystalfreq * 1000;

 	B43_WARN_ON(!(bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU));
 	B43_WARN_ON(crystalfreq == 0);

 	if (crystalfreq >= 30000000) {
 		pdiv = 1;
 		b43_radio_mask(dev, B2062_S_RFPLL_CTL1, 0xFFFB);
 	} else {
 		pdiv = 2;
 		b43_radio_set(dev, B2062_S_RFPLL_CTL1, 0x4);
 	}

 	tmp = (800000000 * pdiv + crystalfreq) / (32000000 * pdiv);
 	tmp = (tmp - 1) & 0xFF;
 	b43_radio_write(dev, B2062_S_RFPLL_CTL18, tmp);

 	tmp = (2 * crystalfreq + 1000000 * pdiv) / (2000000 * pdiv);
 	tmp = ((tmp & 0xFF) - 1) & 0xFFFF;
 	b43_radio_write(dev, B2062_S_RFPLL_CTL19, tmp);

 	ref = (1000 * pdiv + 2 * crystalfreq) / (2000 * pdiv);
 	ref &= 0xFFFF;
 	for (i = 0; i < ARRAY_SIZE(freqdata_tab); i++) {
 		if (ref < freqdata_tab[i].freq) {
 			fd = &freqdata_tab[i];
 			break;
 		}
 	}
 	if (!fd)
 		fd = &freqdata_tab[ARRAY_SIZE(freqdata_tab) - 1];
 	b43dbg(dev->wl, "b2062: Using crystal tab entry %u kHz.\n",
 	       fd->freq); /* FIXME: Keep this printk until the code is fully debugged. */

 	b43_radio_write(dev, B2062_S_RFPLL_CTL8,
 			((u16)(fd->data[1]) << 4) | fd->data[0]);
 	b43_radio_write(dev, B2062_S_RFPLL_CTL9,
 			((u16)(fd->data[3]) << 4) | fd->data[2]);
 	b43_radio_write(dev, B2062_S_RFPLL_CTL10, fd->data[4]);
 	b43_radio_write(dev, B2062_S_RFPLL_CTL11, fd->data[5]);
 }

 /* Initialize the 2063 radio. */
 static void lpphy_2063_init(struct b43_wldev *dev)
 {
 	//TODO
 }

 static void lpphy_sync_stx(struct b43_wldev *dev)
 {
 	//TODO
 }

 static void lpphy_radio_init(struct b43_wldev *dev)
 {
 	/* The radio is attached through the 4wire bus. */
 	b43_phy_set(dev, B43_LPPHY_FOURWIRE_CTL, 0x2);
 	udelay(1);
 	b43_phy_mask(dev, B43_LPPHY_FOURWIRE_CTL, 0xFFFD);
 	udelay(1);

 	if (dev->phy.rev < 2) {
 		lpphy_2062_init(dev);
 	} else {
 		lpphy_2063_init(dev);
 		lpphy_sync_stx(dev);
 		b43_phy_write(dev, B43_PHY_OFDM(0xF0), 0x5F80);
 		b43_phy_write(dev, B43_PHY_OFDM(0xF1), 0);
 		//TODO Do something on the backplane
 	}
 }

 /* Read the TX power control mode from hardware. */
 static void lpphy_read_tx_pctl_mode_from_hardware(struct b43_wldev *dev)
 {
 	struct b43_phy_lp *lpphy = dev->phy.lp;
 	u16 ctl;

 	ctl = b43_phy_read(dev, B43_LPPHY_TX_PWR_CTL_CMD);
 	switch (ctl & B43_LPPHY_TX_PWR_CTL_CMD_MODE) {
 	case B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF:
 		lpphy->txpctl_mode = B43_LPPHY_TXPCTL_OFF;
 		break;
 	case B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW:
 		lpphy->txpctl_mode = B43_LPPHY_TXPCTL_SW;
 		break;
 	case B43_LPPHY_TX_PWR_CTL_CMD_MODE_HW:
 		lpphy->txpctl_mode = B43_LPPHY_TXPCTL_HW;
 		break;
 	default:
 		lpphy->txpctl_mode = B43_LPPHY_TXPCTL_UNKNOWN;
 		B43_WARN_ON(1);
 		break;
 	}
 }

 /* Set the TX power control mode in hardware. */
 static void lpphy_write_tx_pctl_mode_to_hardware(struct b43_wldev *dev)
 {
 	struct b43_phy_lp *lpphy = dev->phy.lp;
 	u16 ctl;

 	switch (lpphy->txpctl_mode) {
 	case B43_LPPHY_TXPCTL_OFF:
 		ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF;
 		break;
 	case B43_LPPHY_TXPCTL_HW:
 		ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_HW;
 		break;
 	case B43_LPPHY_TXPCTL_SW:
 		ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW;
 		break;
 	default:
 		ctl = 0;
 		B43_WARN_ON(1);
 	}
 	b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD,
 			(u16)~B43_LPPHY_TX_PWR_CTL_CMD_MODE, ctl);
 }

 static void lpphy_set_tx_power_control(struct b43_wldev *dev,
 				       enum b43_lpphy_txpctl_mode mode)
 {
 	struct b43_phy_lp *lpphy = dev->phy.lp;
 	enum b43_lpphy_txpctl_mode oldmode;

 	oldmode = lpphy->txpctl_mode;
 	lpphy_read_tx_pctl_mode_from_hardware(dev);
 	if (lpphy->txpctl_mode == mode)
 		return;
 	lpphy->txpctl_mode = mode;

 	if (oldmode == B43_LPPHY_TXPCTL_HW) {
 		//TODO Update TX Power NPT
 		//TODO Clear all TX Power offsets
 	} else {
 		if (mode == B43_LPPHY_TXPCTL_HW) {
 			//TODO Recalculate target TX power
 			b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD,
 					0xFF80, lpphy->tssi_idx);
 			b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_NNUM,
 					0x8FFF, ((u16)lpphy->tssi_npt << 16));
 			//TODO Set "TSSI Transmit Count" variable to total transmitted frame count
 			//TODO Disable TX gain override
 			lpphy->tx_pwr_idx_over = -1;
 		}
 	}
 	if (dev->phy.rev >= 2) {
 		if (mode == B43_LPPHY_TXPCTL_HW)
 			b43_phy_maskset(dev, B43_PHY_OFDM(0xD0), 0xFD, 0x2);
 		else
 			b43_phy_maskset(dev, B43_PHY_OFDM(0xD0), 0xFD, 0);
 	}
 	lpphy_write_tx_pctl_mode_to_hardware(dev);
 }

 static void lpphy_set_tx_power_by_index(struct b43_wldev *dev, u8 index)
 {
 	struct b43_phy_lp *lpphy = dev->phy.lp;

 	lpphy->tx_pwr_idx_over = index;
 	if (lpphy->txpctl_mode != B43_LPPHY_TXPCTL_OFF)
 		lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_SW);

 	//TODO
 }

 static void lpphy_btcoex_override(struct b43_wldev *dev)
 {
 	b43_write16(dev, B43_MMIO_BTCOEX_CTL, 0x3);
 	b43_write16(dev, B43_MMIO_BTCOEX_TXCTL, 0xFF);
 }

 static void lpphy_pr41573_workaround(struct b43_wldev *dev)
 {
 	struct b43_phy_lp *lpphy = dev->phy.lp;
 	u32 *saved_tab;
 	const unsigned int saved_tab_size = 256;
 	enum b43_lpphy_txpctl_mode txpctl_mode;
 	s8 tx_pwr_idx_over;
 	u16 tssi_npt, tssi_idx;

 	saved_tab = kcalloc(saved_tab_size, sizeof(saved_tab[0]), GFP_KERNEL);
 	if (!saved_tab) {
 		b43err(dev->wl, "PR41573 failed. Out of memory!\n");
 		return;
 	}

 	lpphy_read_tx_pctl_mode_from_hardware(dev);
 	txpctl_mode = lpphy->txpctl_mode;
 	tx_pwr_idx_over = lpphy->tx_pwr_idx_over;
 	tssi_npt = lpphy->tssi_npt;
 	tssi_idx = lpphy->tssi_idx;

 	if (dev->phy.rev < 2) {
 		b43_lptab_read_bulk(dev, B43_LPTAB32(10, 0x140),
 				    saved_tab_size, saved_tab);
 	} else {
 		b43_lptab_read_bulk(dev, B43_LPTAB32(7, 0x140),
 				    saved_tab_size, saved_tab);
 	}
 	//TODO

 	kfree(saved_tab);
 }

 static void lpphy_calibration(struct b43_wldev *dev)
 {
 	struct b43_phy_lp *lpphy = dev->phy.lp;
 	enum b43_lpphy_txpctl_mode saved_pctl_mode;

 	b43_mac_suspend(dev);

 	lpphy_btcoex_override(dev);
 	lpphy_read_tx_pctl_mode_from_hardware(dev);
 	saved_pctl_mode = lpphy->txpctl_mode;
 	lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF);
 	//TODO Perform transmit power table I/Q LO calibration
 	if ((dev->phy.rev == 0) && (saved_pctl_mode != B43_LPPHY_TXPCTL_OFF))
 		lpphy_pr41573_workaround(dev);
 	//TODO If a full calibration has not been performed on this channel yet, perform PAPD TX-power calibration
 	lpphy_set_tx_power_control(dev, saved_pctl_mode);
 	//TODO Perform I/Q calibration with a single control value set

 	b43_mac_enable(dev);
 }

 /* Initialize TX power control */
 static void lpphy_tx_pctl_init(struct b43_wldev *dev)
 {
 	if (0/*FIXME HWPCTL capable */) {
 		//TODO
 	} else { /* This device is only software TX power control capable. */
 		if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
 			//TODO
 		} else {
 			//TODO
 		}
 		//TODO set BB multiplier to 0x0096
 	}
 }

 static int b43_lpphy_op_init(struct b43_wldev *dev)
 {
 	/* TODO: band SPROM */
 	lpphy_baseband_init(dev);
 	lpphy_radio_init(dev);
 	//TODO calibrate RC
 	//TODO set channel
 	lpphy_tx_pctl_init(dev);
 	//TODO full calib

 	return 0;
 }

 static u16 b43_lpphy_op_read(struct b43_wldev *dev, u16 reg)
 {
 	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
 	return b43_read16(dev, B43_MMIO_PHY_DATA);
 }

 static void b43_lpphy_op_write(struct b43_wldev *dev, u16 reg, u16 value)
 {
 	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
 	b43_write16(dev, B43_MMIO_PHY_DATA, value);
 }

 static u16 b43_lpphy_op_radio_read(struct b43_wldev *dev, u16 reg)
 {
 	/* Register 1 is a 32-bit register. */
 	B43_WARN_ON(reg == 1);
 	/* LP-PHY needs a special bit set for read access */
 	if (dev->phy.rev < 2) {
 		if (reg != 0x4001)
 			reg |= 0x100;
 	} else
 		reg |= 0x200;

 	b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
 	return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
 }

 static void b43_lpphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
 {
 	/* Register 1 is a 32-bit register. */
 	B43_WARN_ON(reg == 1);

 	b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
 	b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value);
 }

 static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev,
 					 bool blocked)
 {
 	//TODO
 }

 static int b43_lpphy_op_switch_channel(struct b43_wldev *dev,
 				       unsigned int new_channel)
 {
 	//TODO
 	return 0;
 }

 static unsigned int b43_lpphy_op_get_default_chan(struct b43_wldev *dev)
 {
 	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
 		return 1;
 	return 36;
 }

 static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
 {
 	//TODO
 }

 static void b43_lpphy_op_adjust_txpower(struct b43_wldev *dev)
 {
 	//TODO
 }

 static enum b43_txpwr_result b43_lpphy_op_recalc_txpower(struct b43_wldev *dev,
 							 bool ignore_tssi)
 {
 	//TODO
 	return B43_TXPWR_RES_DONE;
 }


 const struct b43_phy_operations b43_phyops_lp = {
 	.allocate		= b43_lpphy_op_allocate,
 	.free			= b43_lpphy_op_free,
 	.prepare_structs	= b43_lpphy_op_prepare_structs,
 	.init			= b43_lpphy_op_init,
 	.phy_read		= b43_lpphy_op_read,
 	.phy_write		= b43_lpphy_op_write,
 	.radio_read		= b43_lpphy_op_radio_read,
 	.radio_write		= b43_lpphy_op_radio_write,
 	.software_rfkill	= b43_lpphy_op_software_rfkill,
 	.switch_analog		= b43_phyop_switch_analog_generic,
 	.switch_channel		= b43_lpphy_op_switch_channel,
 	.get_default_chan	= b43_lpphy_op_get_default_chan,
 	.set_rx_antenna		= b43_lpphy_op_set_rx_antenna,
 	.recalc_txpower		= b43_lpphy_op_recalc_txpower,
 	.adjust_txpower		= b43_lpphy_op_adjust_txpower,
 };
	/*

	Broadcom B43 wireless driver
	IEEE 802.11g LP-PHY driver

	Copyright (c) 2008-2009 Michael Buesch <mb@bu3sch.de>

	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program; see the file COPYING. If not, write to
	the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
	Boston, MA 02110-1301, USA.

	*/

	#include "b43.h"
	#include "main.h"
	#include "phy_lp.h"
	#include "phy_common.h"
	#include "tables_lpphy.h"


	static int b43_lpphy_op_allocate(struct b43_wldev *dev)
	{
	struct b43_phy_lp *lpphy;

	lpphy = kzalloc(sizeof(*lpphy), GFP_KERNEL);
	if (!lpphy)
	return -ENOMEM;
	dev->phy.lp = lpphy;

	return 0;
	}

	static void b43_lpphy_op_prepare_structs(struct b43_wldev *dev)
	{
	struct b43_phy *phy = &dev->phy;
	struct b43_phy_lp *lpphy = phy->lp;

	memset(lpphy, 0, sizeof(*lpphy));

	//TODO
	}

	static void b43_lpphy_op_free(struct b43_wldev *dev)
	{
	struct b43_phy_lp *lpphy = dev->phy.lp;

	kfree(lpphy);
	dev->phy.lp = NULL;
	}

	static void lpphy_table_init(struct b43_wldev *dev)
	{
	//TODO
	}

	static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
	{
	B43_WARN_ON(1);//TODO rev < 2 not supported, yet.
	}

	static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
	{
	struct ssb_bus *bus = dev->dev->bus;
	struct b43_phy_lp *lpphy = dev->phy.lp;

	b43_phy_write(dev, B43_LPPHY_AFE_DAC_CTL, 0x50);
	b43_phy_write(dev, B43_LPPHY_AFE_CTL, 0x8800);
	b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVR, 0);
	b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0);
	b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_0, 0);
	b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_2, 0);
	b43_phy_write(dev, B43_PHY_OFDM(0xF9), 0);
	b43_phy_write(dev, B43_LPPHY_TR_LOOKUP_1, 0);
	b43_phy_set(dev, B43_LPPHY_ADC_COMPENSATION_CTL, 0x10);
	b43_phy_maskset(dev, B43_LPPHY_OFDMSYNCTHRESH0, 0xFF00, 0x78);
	b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xF8FF, 0x200);
	b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xFF00, 0x7F);
	b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xFF0F, 0x40);
	b43_phy_maskset(dev, B43_LPPHY_PREAMBLECONFIRMTO, 0xFF00, 0x2);
	b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x4000);
	b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x2000);
	b43_phy_set(dev, B43_PHY_OFDM(0x10A), 0x1);
	b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x10);
	b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0xFF00, 0xF4);
	b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0x00FF, 0xF100);
	b43_phy_write(dev, B43_LPPHY_CLIPTHRESH, 0x48);
	b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0xFF00, 0x46);
	b43_phy_maskset(dev, B43_PHY_OFDM(0xE4), 0xFF00, 0x10);
	b43_phy_maskset(dev, B43_LPPHY_PWR_THRESH1, 0xFFF0, 0x9);
	b43_phy_mask(dev, B43_LPPHY_GAINDIRECTMISMATCH, ~0xF);
	b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0x00FF, 0x5500);
	b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xF81F, 0xA0);
	b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xE0FF, 0x300);
	b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0x00FF, 0x2A00);
	if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
	b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x2100);
	b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xA);
	} else {
	b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x1E00);
	b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xD);
	}
	b43_phy_maskset(dev, B43_PHY_OFDM(0xFE), 0xFFE0, 0x1F);
	b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0xFFE0, 0xC);
	b43_phy_maskset(dev, B43_PHY_OFDM(0x100), 0xFF00, 0x19);
	b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0x03FF, 0x3C00);
	b43_phy_maskset(dev, B43_PHY_OFDM(0xFE), 0xFC1F, 0x3E0);
	b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0xFFE0, 0xC);
	b43_phy_maskset(dev, B43_PHY_OFDM(0x100), 0x00FF, 0x1900);
	b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0x83FF, 0x5800);
	b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFFE0, 0x12);
	b43_phy_maskset(dev, B43_LPPHY_GAINMISMATCH, 0x0FFF, 0x9000);

	b43_lptab_write(dev, B43_LPTAB16(0x08, 0x14), 0);
	b43_lptab_write(dev, B43_LPTAB16(0x08, 0x12), 0x40);

	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
	b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x40);
	b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xF0FF, 0xB00);
	b43_phy_maskset(dev, B43_LPPHY_SYNCPEAKCNT, 0xFFF8, 0x6);
	b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0x00FF, 0x9D00);
	b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0xFF00, 0xA1);
	} else /* 5GHz */
	b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x40);

	b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0xFF00, 0xB3);
	b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0x00FF, 0xAD00);
	b43_phy_maskset(dev, B43_LPPHY_INPUT_PWRDB, 0xFF00, lpphy->rx_pwr_offset);
	b43_phy_set(dev, B43_LPPHY_RESET_CTL, 0x44);
	b43_phy_write(dev, B43_LPPHY_RESET_CTL, 0x80);
	b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_0, 0xA954);
	b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_1,
	0x2000 \| ((u16)lpphy->rssi_gs << 10) \|
	((u16)lpphy->rssi_vc << 4) \| lpphy->rssi_vf);
	}

	static void lpphy_baseband_init(struct b43_wldev *dev)
	{
	lpphy_table_init(dev);
	if (dev->phy.rev >= 2)
	lpphy_baseband_rev2plus_init(dev);
	else
	lpphy_baseband_rev0_1_init(dev);
	}

	struct b2062_freqdata {
	u16 freq;
	u8 data[6];
	};

	/* Initialize the 2062 radio. */
	static void lpphy_2062_init(struct b43_wldev *dev)
	{
	struct ssb_bus *bus = dev->dev->bus;
	u32 crystalfreq, pdiv, tmp, ref;
	unsigned int i;
	const struct b2062_freqdata *fd = NULL;

	static const struct b2062_freqdata freqdata_tab[] = {
	{ .freq = 12000, .data[0] = 6, .data[1] = 6, .data[2] = 6,
	.data[3] = 6, .data[4] = 10, .data[5] = 6, },
	{ .freq = 13000, .data[0] = 4, .data[1] = 4, .data[2] = 4,
	.data[3] = 4, .data[4] = 11, .data[5] = 7, },
	{ .freq = 14400, .data[0] = 3, .data[1] = 3, .data[2] = 3,
	.data[3] = 3, .data[4] = 12, .data[5] = 7, },
	{ .freq = 16200, .data[0] = 3, .data[1] = 3, .data[2] = 3,
	.data[3] = 3, .data[4] = 13, .data[5] = 8, },
	{ .freq = 18000, .data[0] = 2, .data[1] = 2, .data[2] = 2,
	.data[3] = 2, .data[4] = 14, .data[5] = 8, },
	{ .freq = 19200, .data[0] = 1, .data[1] = 1, .data[2] = 1,
	.data[3] = 1, .data[4] = 14, .data[5] = 9, },
	};

	b2062_upload_init_table(dev);

	b43_radio_write(dev, B2062_N_TX_CTL3, 0);
	b43_radio_write(dev, B2062_N_TX_CTL4, 0);
	b43_radio_write(dev, B2062_N_TX_CTL5, 0);
	b43_radio_write(dev, B2062_N_PDN_CTL0, 0x40);
	b43_radio_write(dev, B2062_N_PDN_CTL0, 0);
	b43_radio_write(dev, B2062_N_CALIB_TS, 0x10);
	b43_radio_write(dev, B2062_N_CALIB_TS, 0);
	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
	b43_radio_set(dev, B2062_N_TSSI_CTL0, 0x1);
	else
	b43_radio_mask(dev, B2062_N_TSSI_CTL0, ~0x1);

	/* Get the crystal freq, in Hz. */
	crystalfreq = bus->chipco.pmu.crystalfreq * 1000;

	B43_WARN_ON(!(bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU));
	B43_WARN_ON(crystalfreq == 0);

	if (crystalfreq >= 30000000) {
	pdiv = 1;
	b43_radio_mask(dev, B2062_S_RFPLL_CTL1, 0xFFFB);
	} else {
	pdiv = 2;
	b43_radio_set(dev, B2062_S_RFPLL_CTL1, 0x4);
	}

	tmp = (800000000 * pdiv + crystalfreq) / (32000000 * pdiv);
	tmp = (tmp - 1) & 0xFF;
	b43_radio_write(dev, B2062_S_RFPLL_CTL18, tmp);

	tmp = (2 * crystalfreq + 1000000 * pdiv) / (2000000 * pdiv);
	tmp = ((tmp & 0xFF) - 1) & 0xFFFF;
	b43_radio_write(dev, B2062_S_RFPLL_CTL19, tmp);

	ref = (1000 * pdiv + 2 * crystalfreq) / (2000 * pdiv);
	ref &= 0xFFFF;
	for (i = 0; i < ARRAY_SIZE(freqdata_tab); i++) {
	if (ref < freqdata_tab[i].freq) {
	fd = &freqdata_tab[i];
	break;
	}
	}
	if (!fd)
	fd = &freqdata_tab[ARRAY_SIZE(freqdata_tab) - 1];
	b43dbg(dev->wl, "b2062: Using crystal tab entry %u kHz.\n",
	fd->freq); /* FIXME: Keep this printk until the code is fully debugged. */

	b43_radio_write(dev, B2062_S_RFPLL_CTL8,
	((u16)(fd->data[1]) << 4) \| fd->data[0]);
	b43_radio_write(dev, B2062_S_RFPLL_CTL9,
	((u16)(fd->data[3]) << 4) \| fd->data[2]);
	b43_radio_write(dev, B2062_S_RFPLL_CTL10, fd->data[4]);
	b43_radio_write(dev, B2062_S_RFPLL_CTL11, fd->data[5]);
	}

	/* Initialize the 2063 radio. */
	static void lpphy_2063_init(struct b43_wldev *dev)
	{
	//TODO
	}

	static void lpphy_sync_stx(struct b43_wldev *dev)
	{
	//TODO
	}

	static void lpphy_radio_init(struct b43_wldev *dev)
	{
	/* The radio is attached through the 4wire bus. */
	b43_phy_set(dev, B43_LPPHY_FOURWIRE_CTL, 0x2);
	udelay(1);
	b43_phy_mask(dev, B43_LPPHY_FOURWIRE_CTL, 0xFFFD);
	udelay(1);

	if (dev->phy.rev < 2) {
	lpphy_2062_init(dev);
	} else {
	lpphy_2063_init(dev);
	lpphy_sync_stx(dev);
	b43_phy_write(dev, B43_PHY_OFDM(0xF0), 0x5F80);
	b43_phy_write(dev, B43_PHY_OFDM(0xF1), 0);
	//TODO Do something on the backplane
	}
	}

	/* Read the TX power control mode from hardware. */
	static void lpphy_read_tx_pctl_mode_from_hardware(struct b43_wldev *dev)
	{
	struct b43_phy_lp *lpphy = dev->phy.lp;
	u16 ctl;

	ctl = b43_phy_read(dev, B43_LPPHY_TX_PWR_CTL_CMD);
	switch (ctl & B43_LPPHY_TX_PWR_CTL_CMD_MODE) {
	case B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF:
	lpphy->txpctl_mode = B43_LPPHY_TXPCTL_OFF;
	break;
	case B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW:
	lpphy->txpctl_mode = B43_LPPHY_TXPCTL_SW;
	break;
	case B43_LPPHY_TX_PWR_CTL_CMD_MODE_HW:
	lpphy->txpctl_mode = B43_LPPHY_TXPCTL_HW;
	break;
	default:
	lpphy->txpctl_mode = B43_LPPHY_TXPCTL_UNKNOWN;
	B43_WARN_ON(1);
	break;
	}
	}

	/* Set the TX power control mode in hardware. */
	static void lpphy_write_tx_pctl_mode_to_hardware(struct b43_wldev *dev)
	{
	struct b43_phy_lp *lpphy = dev->phy.lp;
	u16 ctl;

	switch (lpphy->txpctl_mode) {
	case B43_LPPHY_TXPCTL_OFF:
	ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF;
	break;
	case B43_LPPHY_TXPCTL_HW:
	ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_HW;
	break;
	case B43_LPPHY_TXPCTL_SW:
	ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW;
	break;
	default:
	ctl = 0;
	B43_WARN_ON(1);
	}
	b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD,
	(u16)~B43_LPPHY_TX_PWR_CTL_CMD_MODE, ctl);
	}

	static void lpphy_set_tx_power_control(struct b43_wldev *dev,
	enum b43_lpphy_txpctl_mode mode)
	{
	struct b43_phy_lp *lpphy = dev->phy.lp;
	enum b43_lpphy_txpctl_mode oldmode;

	oldmode = lpphy->txpctl_mode;
	lpphy_read_tx_pctl_mode_from_hardware(dev);
	if (lpphy->txpctl_mode == mode)
	return;
	lpphy->txpctl_mode = mode;

	if (oldmode == B43_LPPHY_TXPCTL_HW) {
	//TODO Update TX Power NPT
	//TODO Clear all TX Power offsets
	} else {
	if (mode == B43_LPPHY_TXPCTL_HW) {
	//TODO Recalculate target TX power
	b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD,
	0xFF80, lpphy->tssi_idx);
	b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_NNUM,
	0x8FFF, ((u16)lpphy->tssi_npt << 16));
	//TODO Set "TSSI Transmit Count" variable to total transmitted frame count
	//TODO Disable TX gain override
	lpphy->tx_pwr_idx_over = -1;
	}
	}
	if (dev->phy.rev >= 2) {
	if (mode == B43_LPPHY_TXPCTL_HW)
	b43_phy_maskset(dev, B43_PHY_OFDM(0xD0), 0xFD, 0x2);
	else
	b43_phy_maskset(dev, B43_PHY_OFDM(0xD0), 0xFD, 0);
	}
	lpphy_write_tx_pctl_mode_to_hardware(dev);
	}

	static void lpphy_set_tx_power_by_index(struct b43_wldev *dev, u8 index)
	{
	struct b43_phy_lp *lpphy = dev->phy.lp;

	lpphy->tx_pwr_idx_over = index;
	if (lpphy->txpctl_mode != B43_LPPHY_TXPCTL_OFF)
	lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_SW);

	//TODO
	}

	static void lpphy_btcoex_override(struct b43_wldev *dev)
	{
	b43_write16(dev, B43_MMIO_BTCOEX_CTL, 0x3);
	b43_write16(dev, B43_MMIO_BTCOEX_TXCTL, 0xFF);
	}

	static void lpphy_pr41573_workaround(struct b43_wldev *dev)
	{
	struct b43_phy_lp *lpphy = dev->phy.lp;
	u32 *saved_tab;
	const unsigned int saved_tab_size = 256;
	enum b43_lpphy_txpctl_mode txpctl_mode;
	s8 tx_pwr_idx_over;
	u16 tssi_npt, tssi_idx;

	saved_tab = kcalloc(saved_tab_size, sizeof(saved_tab[0]), GFP_KERNEL);
	if (!saved_tab) {
	b43err(dev->wl, "PR41573 failed. Out of memory!\n");
	return;
	}

	lpphy_read_tx_pctl_mode_from_hardware(dev);
	txpctl_mode = lpphy->txpctl_mode;
	tx_pwr_idx_over = lpphy->tx_pwr_idx_over;
	tssi_npt = lpphy->tssi_npt;
	tssi_idx = lpphy->tssi_idx;

	if (dev->phy.rev < 2) {
	b43_lptab_read_bulk(dev, B43_LPTAB32(10, 0x140),
	saved_tab_size, saved_tab);
	} else {
	b43_lptab_read_bulk(dev, B43_LPTAB32(7, 0x140),
	saved_tab_size, saved_tab);
	}
	//TODO

	kfree(saved_tab);
	}

	static void lpphy_calibration(struct b43_wldev *dev)
	{
	struct b43_phy_lp *lpphy = dev->phy.lp;
	enum b43_lpphy_txpctl_mode saved_pctl_mode;

	b43_mac_suspend(dev);

	lpphy_btcoex_override(dev);
	lpphy_read_tx_pctl_mode_from_hardware(dev);
	saved_pctl_mode = lpphy->txpctl_mode;
	lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF);
	//TODO Perform transmit power table I/Q LO calibration
	if ((dev->phy.rev == 0) && (saved_pctl_mode != B43_LPPHY_TXPCTL_OFF))
	lpphy_pr41573_workaround(dev);
	//TODO If a full calibration has not been performed on this channel yet, perform PAPD TX-power calibration
	lpphy_set_tx_power_control(dev, saved_pctl_mode);
	//TODO Perform I/Q calibration with a single control value set

	b43_mac_enable(dev);
	}

	/* Initialize TX power control */
	static void lpphy_tx_pctl_init(struct b43_wldev *dev)
	{
	if (0/FIXME HWPCTL capable /) {
	//TODO
	} else { /* This device is only software TX power control capable. */
	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
	//TODO
	} else {
	//TODO
	}
	//TODO set BB multiplier to 0x0096
	}
	}

	static int b43_lpphy_op_init(struct b43_wldev *dev)
	{
	/* TODO: band SPROM */
	lpphy_baseband_init(dev);
	lpphy_radio_init(dev);
	//TODO calibrate RC
	//TODO set channel
	lpphy_tx_pctl_init(dev);
	//TODO full calib

	return 0;
	}

	static u16 b43_lpphy_op_read(struct b43_wldev *dev, u16 reg)
	{
	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
	return b43_read16(dev, B43_MMIO_PHY_DATA);
	}

	static void b43_lpphy_op_write(struct b43_wldev *dev, u16 reg, u16 value)
	{
	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
	b43_write16(dev, B43_MMIO_PHY_DATA, value);
	}

	static u16 b43_lpphy_op_radio_read(struct b43_wldev *dev, u16 reg)
	{
	/* Register 1 is a 32-bit register. */
	B43_WARN_ON(reg == 1);
	/* LP-PHY needs a special bit set for read access */
	if (dev->phy.rev < 2) {
	if (reg != 0x4001)
	reg \|= 0x100;
	} else
	reg \|= 0x200;

	b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
	return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
	}

	static void b43_lpphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
	{
	/* Register 1 is a 32-bit register. */
	B43_WARN_ON(reg == 1);

	b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
	b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value);
	}

	static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev,
	bool blocked)
	{
	//TODO
	}

	static int b43_lpphy_op_switch_channel(struct b43_wldev *dev,
	unsigned int new_channel)
	{
	//TODO
	return 0;
	}

	static unsigned int b43_lpphy_op_get_default_chan(struct b43_wldev *dev)
	{
	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
	return 1;
	return 36;
	}

	static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
	{
	//TODO
	}

	static void b43_lpphy_op_adjust_txpower(struct b43_wldev *dev)
	{
	//TODO
	}

	static enum b43_txpwr_result b43_lpphy_op_recalc_txpower(struct b43_wldev *dev,
	bool ignore_tssi)
	{
	//TODO
	return B43_TXPWR_RES_DONE;
	}


	const struct b43_phy_operations b43_phyops_lp = {
	.allocate = b43_lpphy_op_allocate,
	.free = b43_lpphy_op_free,
	.prepare_structs = b43_lpphy_op_prepare_structs,
	.init = b43_lpphy_op_init,
	.phy_read = b43_lpphy_op_read,
	.phy_write = b43_lpphy_op_write,
	.radio_read = b43_lpphy_op_radio_read,
	.radio_write = b43_lpphy_op_radio_write,
	.software_rfkill = b43_lpphy_op_software_rfkill,
	.switch_analog = b43_phyop_switch_analog_generic,
	.switch_channel = b43_lpphy_op_switch_channel,
	.get_default_chan = b43_lpphy_op_get_default_chan,
	.set_rx_antenna = b43_lpphy_op_set_rx_antenna,
	.recalc_txpower = b43_lpphy_op_recalc_txpower,
	.adjust_txpower = b43_lpphy_op_adjust_txpower,
	};