| /* |
| * processor_throttling.c - Throttling submodule of the ACPI processor driver |
| * |
| * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> |
| * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> |
| * Copyright (C) 2004 Dominik Brodowski <linux@brodo.de> |
| * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> |
| * - Added processor hotplug support |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/cpufreq.h> |
| #include <linux/acpi.h> |
| #include <acpi/processor.h> |
| #include <asm/io.h> |
| #include <linux/uaccess.h> |
| |
| #define PREFIX "ACPI: " |
| |
| #define ACPI_PROCESSOR_CLASS "processor" |
| #define _COMPONENT ACPI_PROCESSOR_COMPONENT |
| ACPI_MODULE_NAME("processor_throttling"); |
| |
| /* ignore_tpc: |
| * 0 -> acpi processor driver doesn't ignore _TPC values |
| * 1 -> acpi processor driver ignores _TPC values |
| */ |
| static int ignore_tpc; |
| module_param(ignore_tpc, int, 0644); |
| MODULE_PARM_DESC(ignore_tpc, "Disable broken BIOS _TPC throttling support"); |
| |
| struct throttling_tstate { |
| unsigned int cpu; /* cpu nr */ |
| int target_state; /* target T-state */ |
| }; |
| |
| struct acpi_processor_throttling_arg { |
| struct acpi_processor *pr; |
| int target_state; |
| bool force; |
| }; |
| |
| #define THROTTLING_PRECHANGE (1) |
| #define THROTTLING_POSTCHANGE (2) |
| |
| static int acpi_processor_get_throttling(struct acpi_processor *pr); |
| int acpi_processor_set_throttling(struct acpi_processor *pr, |
| int state, bool force); |
| |
| static int acpi_processor_update_tsd_coord(void) |
| { |
| int count, count_target; |
| int retval = 0; |
| unsigned int i, j; |
| cpumask_var_t covered_cpus; |
| struct acpi_processor *pr, *match_pr; |
| struct acpi_tsd_package *pdomain, *match_pdomain; |
| struct acpi_processor_throttling *pthrottling, *match_pthrottling; |
| |
| if (!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL)) |
| return -ENOMEM; |
| |
| /* |
| * Now that we have _TSD data from all CPUs, lets setup T-state |
| * coordination between all CPUs. |
| */ |
| for_each_possible_cpu(i) { |
| pr = per_cpu(processors, i); |
| if (!pr) |
| continue; |
| |
| /* Basic validity check for domain info */ |
| pthrottling = &(pr->throttling); |
| |
| /* |
| * If tsd package for one cpu is invalid, the coordination |
| * among all CPUs is thought as invalid. |
| * Maybe it is ugly. |
| */ |
| if (!pthrottling->tsd_valid_flag) { |
| retval = -EINVAL; |
| break; |
| } |
| } |
| if (retval) |
| goto err_ret; |
| |
| for_each_possible_cpu(i) { |
| pr = per_cpu(processors, i); |
| if (!pr) |
| continue; |
| |
| if (cpumask_test_cpu(i, covered_cpus)) |
| continue; |
| pthrottling = &pr->throttling; |
| |
| pdomain = &(pthrottling->domain_info); |
| cpumask_set_cpu(i, pthrottling->shared_cpu_map); |
| cpumask_set_cpu(i, covered_cpus); |
| /* |
| * If the number of processor in the TSD domain is 1, it is |
| * unnecessary to parse the coordination for this CPU. |
| */ |
| if (pdomain->num_processors <= 1) |
| continue; |
| |
| /* Validate the Domain info */ |
| count_target = pdomain->num_processors; |
| count = 1; |
| |
| for_each_possible_cpu(j) { |
| if (i == j) |
| continue; |
| |
| match_pr = per_cpu(processors, j); |
| if (!match_pr) |
| continue; |
| |
| match_pthrottling = &(match_pr->throttling); |
| match_pdomain = &(match_pthrottling->domain_info); |
| if (match_pdomain->domain != pdomain->domain) |
| continue; |
| |
| /* Here i and j are in the same domain. |
| * If two TSD packages have the same domain, they |
| * should have the same num_porcessors and |
| * coordination type. Otherwise it will be regarded |
| * as illegal. |
| */ |
| if (match_pdomain->num_processors != count_target) { |
| retval = -EINVAL; |
| goto err_ret; |
| } |
| |
| if (pdomain->coord_type != match_pdomain->coord_type) { |
| retval = -EINVAL; |
| goto err_ret; |
| } |
| |
| cpumask_set_cpu(j, covered_cpus); |
| cpumask_set_cpu(j, pthrottling->shared_cpu_map); |
| count++; |
| } |
| for_each_possible_cpu(j) { |
| if (i == j) |
| continue; |
| |
| match_pr = per_cpu(processors, j); |
| if (!match_pr) |
| continue; |
| |
| match_pthrottling = &(match_pr->throttling); |
| match_pdomain = &(match_pthrottling->domain_info); |
| if (match_pdomain->domain != pdomain->domain) |
| continue; |
| |
| /* |
| * If some CPUS have the same domain, they |
| * will have the same shared_cpu_map. |
| */ |
| cpumask_copy(match_pthrottling->shared_cpu_map, |
| pthrottling->shared_cpu_map); |
| } |
| } |
| |
| err_ret: |
| free_cpumask_var(covered_cpus); |
| |
| for_each_possible_cpu(i) { |
| pr = per_cpu(processors, i); |
| if (!pr) |
| continue; |
| |
| /* |
| * Assume no coordination on any error parsing domain info. |
| * The coordination type will be forced as SW_ALL. |
| */ |
| if (retval) { |
| pthrottling = &(pr->throttling); |
| cpumask_clear(pthrottling->shared_cpu_map); |
| cpumask_set_cpu(i, pthrottling->shared_cpu_map); |
| pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL; |
| } |
| } |
| |
| return retval; |
| } |
| |
| /* |
| * Update the T-state coordination after the _TSD |
| * data for all cpus is obtained. |
| */ |
| void acpi_processor_throttling_init(void) |
| { |
| if (acpi_processor_update_tsd_coord()) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Assume no T-state coordination\n")); |
| } |
| |
| return; |
| } |
| |
| static int acpi_processor_throttling_notifier(unsigned long event, void *data) |
| { |
| struct throttling_tstate *p_tstate = data; |
| struct acpi_processor *pr; |
| unsigned int cpu ; |
| int target_state; |
| struct acpi_processor_limit *p_limit; |
| struct acpi_processor_throttling *p_throttling; |
| |
| cpu = p_tstate->cpu; |
| pr = per_cpu(processors, cpu); |
| if (!pr) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Invalid pr pointer\n")); |
| return 0; |
| } |
| if (!pr->flags.throttling) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Throttling control is " |
| "unsupported on CPU %d\n", cpu)); |
| return 0; |
| } |
| target_state = p_tstate->target_state; |
| p_throttling = &(pr->throttling); |
| switch (event) { |
| case THROTTLING_PRECHANGE: |
| /* |
| * Prechange event is used to choose one proper t-state, |
| * which meets the limits of thermal, user and _TPC. |
| */ |
| p_limit = &pr->limit; |
| if (p_limit->thermal.tx > target_state) |
| target_state = p_limit->thermal.tx; |
| if (p_limit->user.tx > target_state) |
| target_state = p_limit->user.tx; |
| if (pr->throttling_platform_limit > target_state) |
| target_state = pr->throttling_platform_limit; |
| if (target_state >= p_throttling->state_count) { |
| printk(KERN_WARNING |
| "Exceed the limit of T-state \n"); |
| target_state = p_throttling->state_count - 1; |
| } |
| p_tstate->target_state = target_state; |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "PreChange Event:" |
| "target T-state of CPU %d is T%d\n", |
| cpu, target_state)); |
| break; |
| case THROTTLING_POSTCHANGE: |
| /* |
| * Postchange event is only used to update the |
| * T-state flag of acpi_processor_throttling. |
| */ |
| p_throttling->state = target_state; |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "PostChange Event:" |
| "CPU %d is switched to T%d\n", |
| cpu, target_state)); |
| break; |
| default: |
| printk(KERN_WARNING |
| "Unsupported Throttling notifier event\n"); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * _TPC - Throttling Present Capabilities |
| */ |
| static int acpi_processor_get_platform_limit(struct acpi_processor *pr) |
| { |
| acpi_status status = 0; |
| unsigned long long tpc = 0; |
| |
| if (!pr) |
| return -EINVAL; |
| |
| if (ignore_tpc) |
| goto end; |
| |
| status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc); |
| if (ACPI_FAILURE(status)) { |
| if (status != AE_NOT_FOUND) { |
| ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TPC")); |
| } |
| return -ENODEV; |
| } |
| |
| end: |
| pr->throttling_platform_limit = (int)tpc; |
| return 0; |
| } |
| |
| int acpi_processor_tstate_has_changed(struct acpi_processor *pr) |
| { |
| int result = 0; |
| int throttling_limit; |
| int current_state; |
| struct acpi_processor_limit *limit; |
| int target_state; |
| |
| if (ignore_tpc) |
| return 0; |
| |
| result = acpi_processor_get_platform_limit(pr); |
| if (result) { |
| /* Throttling Limit is unsupported */ |
| return result; |
| } |
| |
| throttling_limit = pr->throttling_platform_limit; |
| if (throttling_limit >= pr->throttling.state_count) { |
| /* Uncorrect Throttling Limit */ |
| return -EINVAL; |
| } |
| |
| current_state = pr->throttling.state; |
| if (current_state > throttling_limit) { |
| /* |
| * The current state can meet the requirement of |
| * _TPC limit. But it is reasonable that OSPM changes |
| * t-states from high to low for better performance. |
| * Of course the limit condition of thermal |
| * and user should be considered. |
| */ |
| limit = &pr->limit; |
| target_state = throttling_limit; |
| if (limit->thermal.tx > target_state) |
| target_state = limit->thermal.tx; |
| if (limit->user.tx > target_state) |
| target_state = limit->user.tx; |
| } else if (current_state == throttling_limit) { |
| /* |
| * Unnecessary to change the throttling state |
| */ |
| return 0; |
| } else { |
| /* |
| * If the current state is lower than the limit of _TPC, it |
| * will be forced to switch to the throttling state defined |
| * by throttling_platfor_limit. |
| * Because the previous state meets with the limit condition |
| * of thermal and user, it is unnecessary to check it again. |
| */ |
| target_state = throttling_limit; |
| } |
| return acpi_processor_set_throttling(pr, target_state, false); |
| } |
| |
| /* |
| * This function is used to reevaluate whether the T-state is valid |
| * after one CPU is onlined/offlined. |
| * It is noted that it won't reevaluate the following properties for |
| * the T-state. |
| * 1. Control method. |
| * 2. the number of supported T-state |
| * 3. TSD domain |
| */ |
| void acpi_processor_reevaluate_tstate(struct acpi_processor *pr, |
| bool is_dead) |
| { |
| int result = 0; |
| |
| if (is_dead) { |
| /* When one CPU is offline, the T-state throttling |
| * will be invalidated. |
| */ |
| pr->flags.throttling = 0; |
| return; |
| } |
| /* the following is to recheck whether the T-state is valid for |
| * the online CPU |
| */ |
| if (!pr->throttling.state_count) { |
| /* If the number of T-state is invalid, it is |
| * invalidated. |
| */ |
| pr->flags.throttling = 0; |
| return; |
| } |
| pr->flags.throttling = 1; |
| |
| /* Disable throttling (if enabled). We'll let subsequent |
| * policy (e.g.thermal) decide to lower performance if it |
| * so chooses, but for now we'll crank up the speed. |
| */ |
| |
| result = acpi_processor_get_throttling(pr); |
| if (result) |
| goto end; |
| |
| if (pr->throttling.state) { |
| result = acpi_processor_set_throttling(pr, 0, false); |
| if (result) |
| goto end; |
| } |
| |
| end: |
| if (result) |
| pr->flags.throttling = 0; |
| } |
| /* |
| * _PTC - Processor Throttling Control (and status) register location |
| */ |
| static int acpi_processor_get_throttling_control(struct acpi_processor *pr) |
| { |
| int result = 0; |
| acpi_status status = 0; |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| union acpi_object *ptc = NULL; |
| union acpi_object obj = { 0 }; |
| struct acpi_processor_throttling *throttling; |
| |
| status = acpi_evaluate_object(pr->handle, "_PTC", NULL, &buffer); |
| if (ACPI_FAILURE(status)) { |
| if (status != AE_NOT_FOUND) { |
| ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PTC")); |
| } |
| return -ENODEV; |
| } |
| |
| ptc = (union acpi_object *)buffer.pointer; |
| if (!ptc || (ptc->type != ACPI_TYPE_PACKAGE) |
| || (ptc->package.count != 2)) { |
| printk(KERN_ERR PREFIX "Invalid _PTC data\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| /* |
| * control_register |
| */ |
| |
| obj = ptc->package.elements[0]; |
| |
| if ((obj.type != ACPI_TYPE_BUFFER) |
| || (obj.buffer.length < sizeof(struct acpi_ptc_register)) |
| || (obj.buffer.pointer == NULL)) { |
| printk(KERN_ERR PREFIX |
| "Invalid _PTC data (control_register)\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| memcpy(&pr->throttling.control_register, obj.buffer.pointer, |
| sizeof(struct acpi_ptc_register)); |
| |
| /* |
| * status_register |
| */ |
| |
| obj = ptc->package.elements[1]; |
| |
| if ((obj.type != ACPI_TYPE_BUFFER) |
| || (obj.buffer.length < sizeof(struct acpi_ptc_register)) |
| || (obj.buffer.pointer == NULL)) { |
| printk(KERN_ERR PREFIX "Invalid _PTC data (status_register)\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| memcpy(&pr->throttling.status_register, obj.buffer.pointer, |
| sizeof(struct acpi_ptc_register)); |
| |
| throttling = &pr->throttling; |
| |
| if ((throttling->control_register.bit_width + |
| throttling->control_register.bit_offset) > 32) { |
| printk(KERN_ERR PREFIX "Invalid _PTC control register\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| if ((throttling->status_register.bit_width + |
| throttling->status_register.bit_offset) > 32) { |
| printk(KERN_ERR PREFIX "Invalid _PTC status register\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| end: |
| kfree(buffer.pointer); |
| |
| return result; |
| } |
| |
| /* |
| * _TSS - Throttling Supported States |
| */ |
| static int acpi_processor_get_throttling_states(struct acpi_processor *pr) |
| { |
| int result = 0; |
| acpi_status status = AE_OK; |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| struct acpi_buffer format = { sizeof("NNNNN"), "NNNNN" }; |
| struct acpi_buffer state = { 0, NULL }; |
| union acpi_object *tss = NULL; |
| int i; |
| |
| status = acpi_evaluate_object(pr->handle, "_TSS", NULL, &buffer); |
| if (ACPI_FAILURE(status)) { |
| if (status != AE_NOT_FOUND) { |
| ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TSS")); |
| } |
| return -ENODEV; |
| } |
| |
| tss = buffer.pointer; |
| if (!tss || (tss->type != ACPI_TYPE_PACKAGE)) { |
| printk(KERN_ERR PREFIX "Invalid _TSS data\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d throttling states\n", |
| tss->package.count)); |
| |
| pr->throttling.state_count = tss->package.count; |
| pr->throttling.states_tss = |
| kmalloc(sizeof(struct acpi_processor_tx_tss) * tss->package.count, |
| GFP_KERNEL); |
| if (!pr->throttling.states_tss) { |
| result = -ENOMEM; |
| goto end; |
| } |
| |
| for (i = 0; i < pr->throttling.state_count; i++) { |
| |
| struct acpi_processor_tx_tss *tx = |
| (struct acpi_processor_tx_tss *)&(pr->throttling. |
| states_tss[i]); |
| |
| state.length = sizeof(struct acpi_processor_tx_tss); |
| state.pointer = tx; |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Extracting state %d\n", i)); |
| |
| status = acpi_extract_package(&(tss->package.elements[i]), |
| &format, &state); |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, "Invalid _TSS data")); |
| result = -EFAULT; |
| kfree(pr->throttling.states_tss); |
| goto end; |
| } |
| |
| if (!tx->freqpercentage) { |
| printk(KERN_ERR PREFIX |
| "Invalid _TSS data: freq is zero\n"); |
| result = -EFAULT; |
| kfree(pr->throttling.states_tss); |
| goto end; |
| } |
| } |
| |
| end: |
| kfree(buffer.pointer); |
| |
| return result; |
| } |
| |
| /* |
| * _TSD - T-State Dependencies |
| */ |
| static int acpi_processor_get_tsd(struct acpi_processor *pr) |
| { |
| int result = 0; |
| acpi_status status = AE_OK; |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| struct acpi_buffer format = { sizeof("NNNNN"), "NNNNN" }; |
| struct acpi_buffer state = { 0, NULL }; |
| union acpi_object *tsd = NULL; |
| struct acpi_tsd_package *pdomain; |
| struct acpi_processor_throttling *pthrottling; |
| |
| pthrottling = &pr->throttling; |
| pthrottling->tsd_valid_flag = 0; |
| |
| status = acpi_evaluate_object(pr->handle, "_TSD", NULL, &buffer); |
| if (ACPI_FAILURE(status)) { |
| if (status != AE_NOT_FOUND) { |
| ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TSD")); |
| } |
| return -ENODEV; |
| } |
| |
| tsd = buffer.pointer; |
| if (!tsd || (tsd->type != ACPI_TYPE_PACKAGE)) { |
| printk(KERN_ERR PREFIX "Invalid _TSD data\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| if (tsd->package.count != 1) { |
| printk(KERN_ERR PREFIX "Invalid _TSD data\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| pdomain = &(pr->throttling.domain_info); |
| |
| state.length = sizeof(struct acpi_tsd_package); |
| state.pointer = pdomain; |
| |
| status = acpi_extract_package(&(tsd->package.elements[0]), |
| &format, &state); |
| if (ACPI_FAILURE(status)) { |
| printk(KERN_ERR PREFIX "Invalid _TSD data\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| if (pdomain->num_entries != ACPI_TSD_REV0_ENTRIES) { |
| printk(KERN_ERR PREFIX "Unknown _TSD:num_entries\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| if (pdomain->revision != ACPI_TSD_REV0_REVISION) { |
| printk(KERN_ERR PREFIX "Unknown _TSD:revision\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| pthrottling = &pr->throttling; |
| pthrottling->tsd_valid_flag = 1; |
| pthrottling->shared_type = pdomain->coord_type; |
| cpumask_set_cpu(pr->id, pthrottling->shared_cpu_map); |
| /* |
| * If the coordination type is not defined in ACPI spec, |
| * the tsd_valid_flag will be clear and coordination type |
| * will be forecd as DOMAIN_COORD_TYPE_SW_ALL. |
| */ |
| if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL && |
| pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY && |
| pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) { |
| pthrottling->tsd_valid_flag = 0; |
| pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL; |
| } |
| |
| end: |
| kfree(buffer.pointer); |
| return result; |
| } |
| |
| /* -------------------------------------------------------------------------- |
| Throttling Control |
| -------------------------------------------------------------------------- */ |
| static int acpi_processor_get_throttling_fadt(struct acpi_processor *pr) |
| { |
| int state = 0; |
| u32 value = 0; |
| u32 duty_mask = 0; |
| u32 duty_value = 0; |
| |
| if (!pr) |
| return -EINVAL; |
| |
| if (!pr->flags.throttling) |
| return -ENODEV; |
| |
| /* |
| * We don't care about error returns - we just try to mark |
| * these reserved so that nobody else is confused into thinking |
| * that this region might be unused.. |
| * |
| * (In particular, allocating the IO range for Cardbus) |
| */ |
| request_region(pr->throttling.address, 6, "ACPI CPU throttle"); |
| |
| pr->throttling.state = 0; |
| |
| duty_mask = pr->throttling.state_count - 1; |
| |
| duty_mask <<= pr->throttling.duty_offset; |
| |
| local_irq_disable(); |
| |
| value = inl(pr->throttling.address); |
| |
| /* |
| * Compute the current throttling state when throttling is enabled |
| * (bit 4 is on). |
| */ |
| if (value & 0x10) { |
| duty_value = value & duty_mask; |
| duty_value >>= pr->throttling.duty_offset; |
| |
| if (duty_value) |
| state = pr->throttling.state_count - duty_value; |
| } |
| |
| pr->throttling.state = state; |
| |
| local_irq_enable(); |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Throttling state is T%d (%d%% throttling applied)\n", |
| state, pr->throttling.states[state].performance)); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_X86 |
| static int acpi_throttling_rdmsr(u64 *value) |
| { |
| u64 msr_high, msr_low; |
| u64 msr = 0; |
| int ret = -1; |
| |
| if ((this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_INTEL) || |
| !this_cpu_has(X86_FEATURE_ACPI)) { |
| printk(KERN_ERR PREFIX |
| "HARDWARE addr space,NOT supported yet\n"); |
| } else { |
| msr_low = 0; |
| msr_high = 0; |
| rdmsr_safe(MSR_IA32_THERM_CONTROL, |
| (u32 *)&msr_low , (u32 *) &msr_high); |
| msr = (msr_high << 32) | msr_low; |
| *value = (u64) msr; |
| ret = 0; |
| } |
| return ret; |
| } |
| |
| static int acpi_throttling_wrmsr(u64 value) |
| { |
| int ret = -1; |
| u64 msr; |
| |
| if ((this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_INTEL) || |
| !this_cpu_has(X86_FEATURE_ACPI)) { |
| printk(KERN_ERR PREFIX |
| "HARDWARE addr space,NOT supported yet\n"); |
| } else { |
| msr = value; |
| wrmsr_safe(MSR_IA32_THERM_CONTROL, |
| msr & 0xffffffff, msr >> 32); |
| ret = 0; |
| } |
| return ret; |
| } |
| #else |
| static int acpi_throttling_rdmsr(u64 *value) |
| { |
| printk(KERN_ERR PREFIX |
| "HARDWARE addr space,NOT supported yet\n"); |
| return -1; |
| } |
| |
| static int acpi_throttling_wrmsr(u64 value) |
| { |
| printk(KERN_ERR PREFIX |
| "HARDWARE addr space,NOT supported yet\n"); |
| return -1; |
| } |
| #endif |
| |
| static int acpi_read_throttling_status(struct acpi_processor *pr, |
| u64 *value) |
| { |
| u32 bit_width, bit_offset; |
| u32 ptc_value; |
| u64 ptc_mask; |
| struct acpi_processor_throttling *throttling; |
| int ret = -1; |
| |
| throttling = &pr->throttling; |
| switch (throttling->status_register.space_id) { |
| case ACPI_ADR_SPACE_SYSTEM_IO: |
| bit_width = throttling->status_register.bit_width; |
| bit_offset = throttling->status_register.bit_offset; |
| |
| acpi_os_read_port((acpi_io_address) throttling->status_register. |
| address, &ptc_value, |
| (u32) (bit_width + bit_offset)); |
| ptc_mask = (1 << bit_width) - 1; |
| *value = (u64) ((ptc_value >> bit_offset) & ptc_mask); |
| ret = 0; |
| break; |
| case ACPI_ADR_SPACE_FIXED_HARDWARE: |
| ret = acpi_throttling_rdmsr(value); |
| break; |
| default: |
| printk(KERN_ERR PREFIX "Unknown addr space %d\n", |
| (u32) (throttling->status_register.space_id)); |
| } |
| return ret; |
| } |
| |
| static int acpi_write_throttling_state(struct acpi_processor *pr, |
| u64 value) |
| { |
| u32 bit_width, bit_offset; |
| u64 ptc_value; |
| u64 ptc_mask; |
| struct acpi_processor_throttling *throttling; |
| int ret = -1; |
| |
| throttling = &pr->throttling; |
| switch (throttling->control_register.space_id) { |
| case ACPI_ADR_SPACE_SYSTEM_IO: |
| bit_width = throttling->control_register.bit_width; |
| bit_offset = throttling->control_register.bit_offset; |
| ptc_mask = (1 << bit_width) - 1; |
| ptc_value = value & ptc_mask; |
| |
| acpi_os_write_port((acpi_io_address) throttling-> |
| control_register.address, |
| (u32) (ptc_value << bit_offset), |
| (u32) (bit_width + bit_offset)); |
| ret = 0; |
| break; |
| case ACPI_ADR_SPACE_FIXED_HARDWARE: |
| ret = acpi_throttling_wrmsr(value); |
| break; |
| default: |
| printk(KERN_ERR PREFIX "Unknown addr space %d\n", |
| (u32) (throttling->control_register.space_id)); |
| } |
| return ret; |
| } |
| |
| static int acpi_get_throttling_state(struct acpi_processor *pr, |
| u64 value) |
| { |
| int i; |
| |
| for (i = 0; i < pr->throttling.state_count; i++) { |
| struct acpi_processor_tx_tss *tx = |
| (struct acpi_processor_tx_tss *)&(pr->throttling. |
| states_tss[i]); |
| if (tx->control == value) |
| return i; |
| } |
| return -1; |
| } |
| |
| static int acpi_get_throttling_value(struct acpi_processor *pr, |
| int state, u64 *value) |
| { |
| int ret = -1; |
| |
| if (state >= 0 && state <= pr->throttling.state_count) { |
| struct acpi_processor_tx_tss *tx = |
| (struct acpi_processor_tx_tss *)&(pr->throttling. |
| states_tss[state]); |
| *value = tx->control; |
| ret = 0; |
| } |
| return ret; |
| } |
| |
| static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) |
| { |
| int state = 0; |
| int ret; |
| u64 value; |
| |
| if (!pr) |
| return -EINVAL; |
| |
| if (!pr->flags.throttling) |
| return -ENODEV; |
| |
| pr->throttling.state = 0; |
| |
| value = 0; |
| ret = acpi_read_throttling_status(pr, &value); |
| if (ret >= 0) { |
| state = acpi_get_throttling_state(pr, value); |
| if (state == -1) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Invalid throttling state, reset\n")); |
| state = 0; |
| ret = acpi_processor_set_throttling(pr, state, true); |
| if (ret) |
| return ret; |
| } |
| pr->throttling.state = state; |
| } |
| |
| return 0; |
| } |
| |
| static int acpi_processor_get_throttling(struct acpi_processor *pr) |
| { |
| cpumask_var_t saved_mask; |
| int ret; |
| |
| if (!pr) |
| return -EINVAL; |
| |
| if (!pr->flags.throttling) |
| return -ENODEV; |
| |
| if (!alloc_cpumask_var(&saved_mask, GFP_KERNEL)) |
| return -ENOMEM; |
| |
| /* |
| * Migrate task to the cpu pointed by pr. |
| */ |
| cpumask_copy(saved_mask, ¤t->cpus_allowed); |
| /* FIXME: use work_on_cpu() */ |
| if (set_cpus_allowed_ptr(current, cpumask_of(pr->id))) { |
| /* Can't migrate to the target pr->id CPU. Exit */ |
| free_cpumask_var(saved_mask); |
| return -ENODEV; |
| } |
| ret = pr->throttling.acpi_processor_get_throttling(pr); |
| /* restore the previous state */ |
| set_cpus_allowed_ptr(current, saved_mask); |
| free_cpumask_var(saved_mask); |
| |
| return ret; |
| } |
| |
| static int acpi_processor_get_fadt_info(struct acpi_processor *pr) |
| { |
| int i, step; |
| |
| if (!pr->throttling.address) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling register\n")); |
| return -EINVAL; |
| } else if (!pr->throttling.duty_width) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling states\n")); |
| return -EINVAL; |
| } |
| /* TBD: Support duty_cycle values that span bit 4. */ |
| else if ((pr->throttling.duty_offset + pr->throttling.duty_width) > 4) { |
| printk(KERN_WARNING PREFIX "duty_cycle spans bit 4\n"); |
| return -EINVAL; |
| } |
| |
| pr->throttling.state_count = 1 << acpi_gbl_FADT.duty_width; |
| |
| /* |
| * Compute state values. Note that throttling displays a linear power |
| * performance relationship (at 50% performance the CPU will consume |
| * 50% power). Values are in 1/10th of a percent to preserve accuracy. |
| */ |
| |
| step = (1000 / pr->throttling.state_count); |
| |
| for (i = 0; i < pr->throttling.state_count; i++) { |
| pr->throttling.states[i].performance = 1000 - step * i; |
| pr->throttling.states[i].power = 1000 - step * i; |
| } |
| return 0; |
| } |
| |
| static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr, |
| int state, bool force) |
| { |
| u32 value = 0; |
| u32 duty_mask = 0; |
| u32 duty_value = 0; |
| |
| if (!pr) |
| return -EINVAL; |
| |
| if ((state < 0) || (state > (pr->throttling.state_count - 1))) |
| return -EINVAL; |
| |
| if (!pr->flags.throttling) |
| return -ENODEV; |
| |
| if (!force && (state == pr->throttling.state)) |
| return 0; |
| |
| if (state < pr->throttling_platform_limit) |
| return -EPERM; |
| /* |
| * Calculate the duty_value and duty_mask. |
| */ |
| if (state) { |
| duty_value = pr->throttling.state_count - state; |
| |
| duty_value <<= pr->throttling.duty_offset; |
| |
| /* Used to clear all duty_value bits */ |
| duty_mask = pr->throttling.state_count - 1; |
| |
| duty_mask <<= acpi_gbl_FADT.duty_offset; |
| duty_mask = ~duty_mask; |
| } |
| |
| local_irq_disable(); |
| |
| /* |
| * Disable throttling by writing a 0 to bit 4. Note that we must |
| * turn it off before you can change the duty_value. |
| */ |
| value = inl(pr->throttling.address); |
| if (value & 0x10) { |
| value &= 0xFFFFFFEF; |
| outl(value, pr->throttling.address); |
| } |
| |
| /* |
| * Write the new duty_value and then enable throttling. Note |
| * that a state value of 0 leaves throttling disabled. |
| */ |
| if (state) { |
| value &= duty_mask; |
| value |= duty_value; |
| outl(value, pr->throttling.address); |
| |
| value |= 0x00000010; |
| outl(value, pr->throttling.address); |
| } |
| |
| pr->throttling.state = state; |
| |
| local_irq_enable(); |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Throttling state set to T%d (%d%%)\n", state, |
| (pr->throttling.states[state].performance ? pr-> |
| throttling.states[state].performance / 10 : 0))); |
| |
| return 0; |
| } |
| |
| static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr, |
| int state, bool force) |
| { |
| int ret; |
| u64 value; |
| |
| if (!pr) |
| return -EINVAL; |
| |
| if ((state < 0) || (state > (pr->throttling.state_count - 1))) |
| return -EINVAL; |
| |
| if (!pr->flags.throttling) |
| return -ENODEV; |
| |
| if (!force && (state == pr->throttling.state)) |
| return 0; |
| |
| if (state < pr->throttling_platform_limit) |
| return -EPERM; |
| |
| value = 0; |
| ret = acpi_get_throttling_value(pr, state, &value); |
| if (ret >= 0) { |
| acpi_write_throttling_state(pr, value); |
| pr->throttling.state = state; |
| } |
| |
| return 0; |
| } |
| |
| static long acpi_processor_throttling_fn(void *data) |
| { |
| struct acpi_processor_throttling_arg *arg = data; |
| struct acpi_processor *pr = arg->pr; |
| |
| return pr->throttling.acpi_processor_set_throttling(pr, |
| arg->target_state, arg->force); |
| } |
| |
| int acpi_processor_set_throttling(struct acpi_processor *pr, |
| int state, bool force) |
| { |
| int ret = 0; |
| unsigned int i; |
| struct acpi_processor *match_pr; |
| struct acpi_processor_throttling *p_throttling; |
| struct acpi_processor_throttling_arg arg; |
| struct throttling_tstate t_state; |
| |
| if (!pr) |
| return -EINVAL; |
| |
| if (!pr->flags.throttling) |
| return -ENODEV; |
| |
| if ((state < 0) || (state > (pr->throttling.state_count - 1))) |
| return -EINVAL; |
| |
| if (cpu_is_offline(pr->id)) { |
| /* |
| * the cpu pointed by pr->id is offline. Unnecessary to change |
| * the throttling state any more. |
| */ |
| return -ENODEV; |
| } |
| |
| t_state.target_state = state; |
| p_throttling = &(pr->throttling); |
| |
| /* |
| * The throttling notifier will be called for every |
| * affected cpu in order to get one proper T-state. |
| * The notifier event is THROTTLING_PRECHANGE. |
| */ |
| for_each_cpu_and(i, cpu_online_mask, p_throttling->shared_cpu_map) { |
| t_state.cpu = i; |
| acpi_processor_throttling_notifier(THROTTLING_PRECHANGE, |
| &t_state); |
| } |
| /* |
| * The function of acpi_processor_set_throttling will be called |
| * to switch T-state. If the coordination type is SW_ALL or HW_ALL, |
| * it is necessary to call it for every affected cpu. Otherwise |
| * it can be called only for the cpu pointed by pr. |
| */ |
| if (p_throttling->shared_type == DOMAIN_COORD_TYPE_SW_ANY) { |
| arg.pr = pr; |
| arg.target_state = state; |
| arg.force = force; |
| ret = work_on_cpu(pr->id, acpi_processor_throttling_fn, &arg); |
| } else { |
| /* |
| * When the T-state coordination is SW_ALL or HW_ALL, |
| * it is necessary to set T-state for every affected |
| * cpus. |
| */ |
| for_each_cpu_and(i, cpu_online_mask, |
| p_throttling->shared_cpu_map) { |
| match_pr = per_cpu(processors, i); |
| /* |
| * If the pointer is invalid, we will report the |
| * error message and continue. |
| */ |
| if (!match_pr) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Invalid Pointer for CPU %d\n", i)); |
| continue; |
| } |
| /* |
| * If the throttling control is unsupported on CPU i, |
| * we will report the error message and continue. |
| */ |
| if (!match_pr->flags.throttling) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Throttling Control is unsupported " |
| "on CPU %d\n", i)); |
| continue; |
| } |
| |
| arg.pr = match_pr; |
| arg.target_state = state; |
| arg.force = force; |
| ret = work_on_cpu(pr->id, acpi_processor_throttling_fn, |
| &arg); |
| } |
| } |
| /* |
| * After the set_throttling is called, the |
| * throttling notifier is called for every |
| * affected cpu to update the T-states. |
| * The notifier event is THROTTLING_POSTCHANGE |
| */ |
| for_each_cpu_and(i, cpu_online_mask, p_throttling->shared_cpu_map) { |
| t_state.cpu = i; |
| acpi_processor_throttling_notifier(THROTTLING_POSTCHANGE, |
| &t_state); |
| } |
| |
| return ret; |
| } |
| |
| int acpi_processor_get_throttling_info(struct acpi_processor *pr) |
| { |
| int result = 0; |
| struct acpi_processor_throttling *pthrottling; |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n", |
| pr->throttling.address, |
| pr->throttling.duty_offset, |
| pr->throttling.duty_width)); |
| |
| /* |
| * Evaluate _PTC, _TSS and _TPC |
| * They must all be present or none of them can be used. |
| */ |
| if (acpi_processor_get_throttling_control(pr) || |
| acpi_processor_get_throttling_states(pr) || |
| acpi_processor_get_platform_limit(pr)) |
| { |
| pr->throttling.acpi_processor_get_throttling = |
| &acpi_processor_get_throttling_fadt; |
| pr->throttling.acpi_processor_set_throttling = |
| &acpi_processor_set_throttling_fadt; |
| if (acpi_processor_get_fadt_info(pr)) |
| return 0; |
| } else { |
| pr->throttling.acpi_processor_get_throttling = |
| &acpi_processor_get_throttling_ptc; |
| pr->throttling.acpi_processor_set_throttling = |
| &acpi_processor_set_throttling_ptc; |
| } |
| |
| /* |
| * If TSD package for one CPU can't be parsed successfully, it means |
| * that this CPU will have no coordination with other CPUs. |
| */ |
| if (acpi_processor_get_tsd(pr)) { |
| pthrottling = &pr->throttling; |
| pthrottling->tsd_valid_flag = 0; |
| cpumask_set_cpu(pr->id, pthrottling->shared_cpu_map); |
| pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL; |
| } |
| |
| /* |
| * PIIX4 Errata: We don't support throttling on the original PIIX4. |
| * This shouldn't be an issue as few (if any) mobile systems ever |
| * used this part. |
| */ |
| if (errata.piix4.throttle) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Throttling not supported on PIIX4 A- or B-step\n")); |
| return 0; |
| } |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d throttling states\n", |
| pr->throttling.state_count)); |
| |
| pr->flags.throttling = 1; |
| |
| /* |
| * Disable throttling (if enabled). We'll let subsequent policy (e.g. |
| * thermal) decide to lower performance if it so chooses, but for now |
| * we'll crank up the speed. |
| */ |
| |
| result = acpi_processor_get_throttling(pr); |
| if (result) |
| goto end; |
| |
| if (pr->throttling.state) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Disabling throttling (was T%d)\n", |
| pr->throttling.state)); |
| result = acpi_processor_set_throttling(pr, 0, false); |
| if (result) |
| goto end; |
| } |
| |
| end: |
| if (result) |
| pr->flags.throttling = 0; |
| |
| return result; |
| } |
| |