| /* |
| * drivers/net/ether00.c |
| * |
| * Copyright (C) 2001 Altera Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| /* includes */ |
| #include <linux/config.h> |
| #include <linux/pci.h> |
| #include <linux/sched.h> |
| #include <linux/netdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/etherdevice.h> |
| #include <linux/module.h> |
| #include <linux/tqueue.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/pld/pld_hotswap.h> |
| #include <asm/arch/excalibur.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/irq.h> |
| #include <asm/io.h> |
| #include <asm/sizes.h> |
| |
| #include <asm/arch/ether00.h> |
| #include <asm/arch/tdkphy.h> |
| |
| |
| MODULE_AUTHOR("Clive Davies"); |
| MODULE_DESCRIPTION("Altera Ether00 IP core driver"); |
| MODULE_LICENSE("GPL"); |
| |
| #define PKT_BUF_SZ 1540 /* Size of each rx buffer */ |
| #define ETH_NR 4 /* Number of MACs this driver supports */ |
| |
| #define DEBUG(x) |
| |
| #define __dma_va(x) (unsigned int)((unsigned int)priv->dma_data+(((unsigned int)(x))&(EXC_SPSRAM_BLOCK0_SIZE-1))) |
| #define __dma_pa(x) (unsigned int)(EXC_SPSRAM_BLOCK0_BASE+(((unsigned int)(x))-(unsigned int)priv->dma_data)) |
| |
| #define ETHER00_BASE 0 |
| #define ETHER00_TYPE |
| #define ETHER00_NAME "ether00" |
| #define MAC_REG_SIZE 0x400 /* size of MAC register area */ |
| |
| |
| |
| /* typedefs */ |
| |
| /* The definition of the driver control structure */ |
| |
| #define RX_NUM_BUFF 10 |
| #define RX_NUM_FDESC 10 |
| #define TX_NUM_FDESC 10 |
| |
| struct tx_fda_ent{ |
| FDA_DESC fd; |
| BUF_DESC bd; |
| BUF_DESC pad; |
| }; |
| struct rx_fda_ent{ |
| FDA_DESC fd; |
| BUF_DESC bd; |
| BUF_DESC pad; |
| }; |
| struct rx_blist_ent{ |
| FDA_DESC fd; |
| BUF_DESC bd; |
| BUF_DESC pad; |
| }; |
| struct net_priv |
| { |
| struct net_device_stats stats; |
| struct sk_buff* skb; |
| void* dma_data; |
| struct rx_blist_ent* rx_blist_vp; |
| struct rx_fda_ent* rx_fda_ptr; |
| struct tx_fda_ent* tx_fdalist_vp; |
| struct tq_struct tq_memupdate; |
| unsigned char memupdate_scheduled; |
| unsigned char rx_disabled; |
| unsigned char queue_stopped; |
| spinlock_t rx_lock; |
| }; |
| |
| static const char vendor_id[2]={0x07,0xed}; |
| |
| #ifdef ETHER00_DEBUG |
| |
| /* Dump (most) registers for debugging puposes */ |
| |
| static void dump_regs(struct net_device *dev){ |
| struct net_priv* priv=dev->priv; |
| unsigned int* i; |
| |
| printk("\n RX free descriptor area:\n"); |
| |
| for(i=(unsigned int*)priv->rx_fda_ptr; |
| i<((unsigned int*)(priv->rx_fda_ptr+RX_NUM_FDESC));){ |
| printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3)); |
| i+=4; |
| } |
| |
| printk("\n RX buffer list:\n"); |
| |
| for(i=(unsigned int*)priv->rx_blist_vp; |
| i<((unsigned int*)(priv->rx_blist_vp+RX_NUM_BUFF));){ |
| printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3)); |
| i+=4; |
| } |
| |
| printk("\n TX frame descriptor list:\n"); |
| |
| for(i=(unsigned int*)priv->tx_fdalist_vp; |
| i<((unsigned int*)(priv->tx_fdalist_vp+TX_NUM_FDESC));){ |
| printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3)); |
| i+=4; |
| } |
| |
| printk("\ndma ctl=%#x\n",readw(ETHER_DMA_CTL(dev->base_addr))); |
| printk("txfrmptr=%#x\n",readw(ETHER_TXFRMPTR(dev->base_addr))); |
| printk("txthrsh=%#x\n",readw(ETHER_TXTHRSH(dev->base_addr))); |
| printk("txpollctr=%#x\n",readw(ETHER_TXPOLLCTR(dev->base_addr))); |
| printk("blfrmptr=%#x\n",readw(ETHER_BLFRMPTR(dev->base_addr))); |
| printk("rxfragsize=%#x\n",readw(ETHER_RXFRAGSIZE(dev->base_addr))); |
| printk("tx_int_en=%#x\n",readw(ETHER_INT_EN(dev->base_addr))); |
| printk("fda_bas=%#x\n",readw(ETHER_FDA_BAS(dev->base_addr))); |
| printk("fda_lim=%#x\n",readw(ETHER_FDA_LIM(dev->base_addr))); |
| printk("int_src=%#x\n",readw(ETHER_INT_SRC(dev->base_addr))); |
| printk("pausecnt=%#x\n",readw(ETHER_PAUSECNT(dev->base_addr))); |
| printk("rempaucnt=%#x\n",readw(ETHER_REMPAUCNT(dev->base_addr))); |
| printk("txconfrmstat=%#x\n",readw(ETHER_TXCONFRMSTAT(dev->base_addr))); |
| printk("mac_ctl=%#x\n",readw(ETHER_MAC_CTL(dev->base_addr))); |
| printk("arc_ctl=%#x\n",readw(ETHER_ARC_CTL(dev->base_addr))); |
| printk("tx_ctl=%#x\n",readw(ETHER_TX_CTL(dev->base_addr))); |
| } |
| #endif /* ETHER00_DEBUG */ |
| |
| |
| static int ether00_write_phy(struct net_device *dev, short address, short value) |
| { |
| volatile int count = 1024; |
| writew(value,ETHER_MD_DATA(dev->base_addr)); |
| writew( ETHER_MD_CA_BUSY_MSK | |
| ETHER_MD_CA_WR_MSK | |
| (address & ETHER_MD_CA_ADDR_MSK), |
| ETHER_MD_CA(dev->base_addr)); |
| |
| /* Wait for the command to complete */ |
| while((readw(ETHER_MD_CA(dev->base_addr)) & ETHER_MD_CA_BUSY_MSK)&&count){ |
| count--; |
| } |
| if (!count){ |
| printk("Write to phy failed, addr=%#x, data=%#x\n",address, value); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static int ether00_read_phy(struct net_device *dev, short address) |
| { |
| volatile int count = 1024; |
| writew( ETHER_MD_CA_BUSY_MSK | |
| (address & ETHER_MD_CA_ADDR_MSK), |
| ETHER_MD_CA(dev->base_addr)); |
| |
| /* Wait for the command to complete */ |
| while((readw(ETHER_MD_CA(dev->base_addr)) & ETHER_MD_CA_BUSY_MSK)&&count){ |
| count--; |
| } |
| if (!count){ |
| printk(KERN_WARNING "Read from phy timed out\n"); |
| return -EIO; |
| } |
| return readw(ETHER_MD_DATA(dev->base_addr)); |
| } |
| |
| static void ether00_phy_int(int irq_num, void* dev_id, struct pt_regs* regs) |
| { |
| struct net_device* dev=dev_id; |
| int irq_status; |
| |
| irq_status=ether00_read_phy(dev, PHY_IRQ_CONTROL); |
| |
| if(irq_status & PHY_IRQ_CONTROL_ANEG_COMP_INT_MSK){ |
| /* |
| * Autonegotiation complete on epxa10db. The mac doesn't |
| * twig if we're in full duplex so we need to check the |
| * phy status register and configure the mac accordingly |
| */ |
| if(ether00_read_phy(dev, PHY_STATUS)&(PHY_STATUS_10T_F_MSK|PHY_STATUS_100_X_F_MSK)){ |
| int tmp; |
| tmp=readl(ETHER_MAC_CTL(dev->base_addr)); |
| writel(tmp|ETHER_MAC_CTL_FULLDUP_MSK,ETHER_MAC_CTL(dev->base_addr)); |
| } |
| } |
| |
| if(irq_status&PHY_IRQ_CONTROL_LS_CHG_INT_MSK){ |
| |
| if(ether00_read_phy(dev, PHY_STATUS)& PHY_STATUS_LINK_MSK){ |
| /* Link is up */ |
| netif_carrier_on(dev); |
| //printk("Carrier on\n"); |
| }else{ |
| netif_carrier_off(dev); |
| //printk("Carrier off\n"); |
| |
| } |
| } |
| |
| } |
| |
| static void setup_blist_entry(struct sk_buff* skb,struct rx_blist_ent* blist_ent_ptr){ |
| /* Make the buffer consistent with the cache as the mac is going to write |
| * directly into it*/ |
| blist_ent_ptr->fd.FDSystem=(unsigned int)skb; |
| blist_ent_ptr->bd.BuffData=(char*)__pa(skb->data); |
| consistent_sync(skb->data,PKT_BUF_SZ,PCI_DMA_FROMDEVICE); |
| /* align IP on 16 Byte (DMA_CTL set to skip 2 bytes) */ |
| skb_reserve(skb,2); |
| blist_ent_ptr->bd.BuffLength=PKT_BUF_SZ-2; |
| blist_ent_ptr->fd.FDLength=1; |
| blist_ent_ptr->fd.FDCtl=FDCTL_COWNSFD_MSK; |
| blist_ent_ptr->bd.BDCtl=BDCTL_COWNSBD_MSK; |
| } |
| |
| |
| static int ether00_mem_init(struct net_device* dev) |
| { |
| struct net_priv* priv=dev->priv; |
| struct tx_fda_ent *tx_fd_ptr,*tx_end_ptr; |
| struct rx_blist_ent* blist_ent_ptr; |
| int i; |
| |
| /* |
| * Grab a block of on chip SRAM to contain the control stuctures for |
| * the ethernet MAC. This uncached becuase it needs to be accesses by both |
| * bus masters (cpu + mac). However, it shouldn't matter too much in terms |
| * of speed as its on chip memory |
| */ |
| priv->dma_data=ioremap_nocache(EXC_SPSRAM_BLOCK0_BASE,EXC_SPSRAM_BLOCK0_SIZE ); |
| if (!priv->dma_data) |
| return -ENOMEM; |
| |
| priv->rx_fda_ptr=(struct rx_fda_ent*)priv->dma_data; |
| /* |
| * Now share it out amongst the Frame descriptors and the buffer list |
| */ |
| priv->rx_blist_vp=(struct rx_blist_ent*)((unsigned int)priv->dma_data+RX_NUM_FDESC*sizeof(struct rx_fda_ent)); |
| |
| /* |
| *Initalise the FDA list |
| */ |
| /* set ownership to the controller */ |
| memset(priv->rx_fda_ptr,0x80,RX_NUM_FDESC*sizeof(struct rx_fda_ent)); |
| |
| /* |
| *Initialise the buffer list |
| */ |
| blist_ent_ptr=priv->rx_blist_vp; |
| i=0; |
| while(blist_ent_ptr<(priv->rx_blist_vp+RX_NUM_BUFF)){ |
| struct sk_buff *skb; |
| blist_ent_ptr->fd.FDLength=1; |
| skb=dev_alloc_skb(PKT_BUF_SZ); |
| if(skb){ |
| setup_blist_entry(skb,blist_ent_ptr); |
| blist_ent_ptr->fd.FDNext=(FDA_DESC*)__dma_pa(blist_ent_ptr+1); |
| blist_ent_ptr->bd.BDStat=i++; |
| blist_ent_ptr++; |
| } |
| else |
| { |
| printk("Failed to initalise buffer list\n"); |
| } |
| |
| } |
| blist_ent_ptr--; |
| blist_ent_ptr->fd.FDNext=(FDA_DESC*)__dma_pa(priv->rx_blist_vp); |
| |
| priv->tx_fdalist_vp=(struct tx_fda_ent*)(priv->rx_blist_vp+RX_NUM_BUFF); |
| |
| /* Initialise the buffers to be a circular list. The mac will then go poll |
| * the list until it finds a frame ready to transmit */ |
| tx_end_ptr=priv->tx_fdalist_vp+TX_NUM_FDESC; |
| for(tx_fd_ptr=priv->tx_fdalist_vp;tx_fd_ptr<tx_end_ptr;tx_fd_ptr++){ |
| tx_fd_ptr->fd.FDNext=(FDA_DESC*)__dma_pa((tx_fd_ptr+1)); |
| tx_fd_ptr->fd.FDCtl=1; |
| tx_fd_ptr->fd.FDStat=0; |
| tx_fd_ptr->fd.FDLength=1; |
| |
| } |
| /* Change the last FDNext pointer to make a circular list */ |
| tx_fd_ptr--; |
| tx_fd_ptr->fd.FDNext=(FDA_DESC*)__dma_pa(priv->tx_fdalist_vp); |
| |
| /* Point the device at the chain of Rx and Tx Buffers */ |
| writel((unsigned int)__dma_pa(priv->rx_fda_ptr),ETHER_FDA_BAS(dev->base_addr)); |
| writel((RX_NUM_FDESC-1)*sizeof(struct rx_fda_ent),ETHER_FDA_LIM(dev->base_addr)); |
| writel((unsigned int)__dma_pa(priv->rx_blist_vp),ETHER_BLFRMPTR(dev->base_addr)); |
| |
| writel((unsigned int)__dma_pa(priv->tx_fdalist_vp),ETHER_TXFRMPTR(dev->base_addr)); |
| |
| return 0; |
| } |
| |
| |
| void ether00_mem_update(void* dev_id) |
| { |
| struct net_device* dev=dev_id; |
| struct net_priv* priv=dev->priv; |
| struct sk_buff* skb; |
| struct tx_fda_ent *fda_ptr=priv->tx_fdalist_vp; |
| struct rx_blist_ent* blist_ent_ptr; |
| unsigned long flags; |
| |
| priv->tq_memupdate.sync=0; |
| //priv->tq_memupdate.list= |
| priv->memupdate_scheduled=0; |
| |
| /* Transmit interrupt */ |
| while(fda_ptr<(priv->tx_fdalist_vp+TX_NUM_FDESC)){ |
| if(!(FDCTL_COWNSFD_MSK&fda_ptr->fd.FDCtl) && (ETHER_TX_STAT_COMP_MSK&fda_ptr->fd.FDStat)){ |
| priv->stats.tx_packets++; |
| priv->stats.tx_bytes+=fda_ptr->bd.BuffLength; |
| skb=(struct sk_buff*)fda_ptr->fd.FDSystem; |
| //printk("%d:txcln:fda=%#x skb=%#x\n",jiffies,fda_ptr,skb); |
| dev_kfree_skb(skb); |
| fda_ptr->fd.FDSystem=0; |
| fda_ptr->fd.FDStat=0; |
| fda_ptr->fd.FDCtl=0; |
| } |
| fda_ptr++; |
| } |
| /* Fill in any missing buffers from the received queue */ |
| spin_lock_irqsave(&priv->rx_lock,flags); |
| blist_ent_ptr=priv->rx_blist_vp; |
| while(blist_ent_ptr<(priv->rx_blist_vp+RX_NUM_BUFF)){ |
| /* fd.FDSystem of 0 indicates we failed to allocate the buffer in the ISR */ |
| if(!blist_ent_ptr->fd.FDSystem){ |
| struct sk_buff *skb; |
| skb=dev_alloc_skb(PKT_BUF_SZ); |
| blist_ent_ptr->fd.FDSystem=(unsigned int)skb; |
| if(skb){ |
| setup_blist_entry(skb,blist_ent_ptr); |
| } |
| else |
| { |
| break; |
| } |
| } |
| blist_ent_ptr++; |
| } |
| spin_unlock_irqrestore(&priv->rx_lock,flags); |
| if(priv->queue_stopped){ |
| //printk("%d:cln:start q\n",jiffies); |
| netif_start_queue(dev); |
| } |
| if(priv->rx_disabled){ |
| //printk("%d:enable_irq\n",jiffies); |
| priv->rx_disabled=0; |
| writel(ETHER_RX_CTL_RXEN_MSK,ETHER_RX_CTL(dev->base_addr)); |
| |
| } |
| } |
| |
| |
| static void ether00_int( int irq_num, void* dev_id, struct pt_regs* regs) |
| { |
| struct net_device* dev=dev_id; |
| struct net_priv* priv=dev->priv; |
| |
| unsigned int interruptValue; |
| |
| interruptValue=readl(ETHER_INT_SRC(dev->base_addr)); |
| |
| //printk("INT_SRC=%x\n",interruptValue); |
| |
| if(!(readl(ETHER_INT_SRC(dev->base_addr)) & ETHER_INT_SRC_IRQ_MSK)) |
| { |
| return; /* Interrupt wasn't caused by us!! */ |
| } |
| |
| if(readl(ETHER_INT_SRC(dev->base_addr))& |
| (ETHER_INT_SRC_INTMACRX_MSK | |
| ETHER_INT_SRC_FDAEX_MSK | |
| ETHER_INT_SRC_BLEX_MSK)) { |
| struct rx_blist_ent* blist_ent_ptr; |
| struct rx_fda_ent* fda_ent_ptr; |
| struct sk_buff* skb; |
| |
| fda_ent_ptr=priv->rx_fda_ptr; |
| spin_lock(&priv->rx_lock); |
| while(fda_ent_ptr<(priv->rx_fda_ptr+RX_NUM_FDESC)){ |
| int result; |
| |
| if(!(fda_ent_ptr->fd.FDCtl&FDCTL_COWNSFD_MSK)) |
| { |
| /* This frame is ready for processing */ |
| /*find the corresponding buffer in the bufferlist */ |
| blist_ent_ptr=priv->rx_blist_vp+fda_ent_ptr->bd.BDStat; |
| skb=(struct sk_buff*)blist_ent_ptr->fd.FDSystem; |
| |
| /* Pass this skb up the stack */ |
| skb->dev=dev; |
| skb_put(skb,fda_ent_ptr->fd.FDLength); |
| skb->protocol=eth_type_trans(skb,dev); |
| skb->ip_summed=CHECKSUM_UNNECESSARY; |
| result=netif_rx(skb); |
| /* Update statistics */ |
| priv->stats.rx_packets++; |
| priv->stats.rx_bytes+=fda_ent_ptr->fd.FDLength; |
| |
| /* Free the FDA entry */ |
| fda_ent_ptr->bd.BDStat=0xff; |
| fda_ent_ptr->fd.FDCtl=FDCTL_COWNSFD_MSK; |
| |
| /* Allocate a new skb and point the bd entry to it */ |
| blist_ent_ptr->fd.FDSystem=0; |
| skb=dev_alloc_skb(PKT_BUF_SZ); |
| //printk("allocskb=%#x\n",skb); |
| if(skb){ |
| setup_blist_entry(skb,blist_ent_ptr); |
| |
| } |
| else if(!priv->memupdate_scheduled){ |
| int tmp; |
| /* There are no buffers at the moment, so schedule */ |
| /* the background task to sort this out */ |
| schedule_task(&priv->tq_memupdate); |
| priv->memupdate_scheduled=1; |
| printk(KERN_DEBUG "%s:No buffers",dev->name); |
| /* If this interrupt was due to a lack of buffers then |
| * we'd better stop the receiver too */ |
| if(interruptValueÐER_INT_SRC_BLEX_MSK){ |
| priv->rx_disabled=1; |
| tmp=readl(ETHER_INT_SRC(dev->base_addr)); |
| writel(tmp&~ETHER_RX_CTL_RXEN_MSK,ETHER_RX_CTL(dev->base_addr)); |
| printk(KERN_DEBUG "%s:Halting rx",dev->name); |
| } |
| |
| } |
| |
| } |
| fda_ent_ptr++; |
| } |
| spin_unlock(&priv->rx_lock); |
| |
| /* Clear the interrupts */ |
| writel(ETHER_INT_SRC_INTMACRX_MSK | ETHER_INT_SRC_FDAEX_MSK |
| | ETHER_INT_SRC_BLEX_MSK,ETHER_INT_SRC(dev->base_addr)); |
| |
| } |
| |
| if(readl(ETHER_INT_SRC(dev->base_addr))ÐER_INT_SRC_INTMACTX_MSK){ |
| |
| if(!priv->memupdate_scheduled){ |
| schedule_task(&priv->tq_memupdate); |
| priv->memupdate_scheduled=1; |
| } |
| /* Clear the interrupt */ |
| writel(ETHER_INT_SRC_INTMACTX_MSK,ETHER_INT_SRC(dev->base_addr)); |
| } |
| |
| if (readl(ETHER_INT_SRC(dev->base_addr)) & (ETHER_INT_SRC_SWINT_MSK| |
| ETHER_INT_SRC_INTEARNOT_MSK| |
| ETHER_INT_SRC_INTLINK_MSK| |
| ETHER_INT_SRC_INTEXBD_MSK| |
| ETHER_INT_SRC_INTTXCTLCMP_MSK)) |
| { |
| /* |
| * Not using any of these so they shouldn't happen |
| * |
| * In the cased of INTEXBD - if you allocate more |
| * than 28 decsriptors you may need to think about this |
| */ |
| printk("Not using this interrupt\n"); |
| } |
| |
| if (readl(ETHER_INT_SRC(dev->base_addr)) & |
| (ETHER_INT_SRC_INTSBUS_MSK | |
| ETHER_INT_SRC_INTNRABT_MSK |
| |ETHER_INT_SRC_DMPARERR_MSK)) |
| { |
| /* |
| * Hardware errors, we can either ignore them and hope they go away |
| *or reset the device, I'll try the first for now to see if they happen |
| */ |
| printk("Hardware error\n"); |
| } |
| } |
| |
| static void ether00_setup_ethernet_address(struct net_device* dev) |
| { |
| int tmp; |
| |
| dev->addr_len=6; |
| writew(0,ETHER_ARC_ADR(dev->base_addr)); |
| writel((dev->dev_addr[0]<<24) | |
| (dev->dev_addr[1]<<16) | |
| (dev->dev_addr[2]<<8) | |
| dev->dev_addr[3], |
| ETHER_ARC_DATA(dev->base_addr)); |
| |
| writew(4,ETHER_ARC_ADR(dev->base_addr)); |
| tmp=readl(ETHER_ARC_DATA(dev->base_addr)); |
| tmp&=0xffff; |
| tmp|=(dev->dev_addr[4]<<24) | (dev->dev_addr[5]<<16); |
| writel(tmp, ETHER_ARC_DATA(dev->base_addr)); |
| /* Enable this entry in the ARC */ |
| |
| writel(1,ETHER_ARC_ENA(dev->base_addr)); |
| |
| return; |
| } |
| |
| |
| static void ether00_reset(struct net_device *dev) |
| { |
| /* reset the controller */ |
| writew(ETHER_MAC_CTL_RESET_MSK,ETHER_MAC_CTL(dev->base_addr)); |
| |
| /* |
| * Make sure we're not going to send anything |
| */ |
| |
| writew(ETHER_TX_CTL_TXHALT_MSK,ETHER_TX_CTL(dev->base_addr)); |
| |
| /* |
| * Make sure we're not going to receive anything |
| */ |
| writew(ETHER_RX_CTL_RXHALT_MSK,ETHER_RX_CTL(dev->base_addr)); |
| |
| /* |
| * Disable Interrupts for now, and set the burst size to 8 bytes |
| */ |
| |
| writel(ETHER_DMA_CTL_INTMASK_MSK | |
| ((8 << ETHER_DMA_CTL_DMBURST_OFST) & ETHER_DMA_CTL_DMBURST_MSK) |
| |(2<<ETHER_DMA_CTL_RXALIGN_OFST), |
| ETHER_DMA_CTL(dev->base_addr)); |
| |
| |
| /* |
| * Set TxThrsh - start transmitting a packet after 1514 |
| * bytes or when a packet is complete, whichever comes first |
| */ |
| writew(1514,ETHER_TXTHRSH(dev->base_addr)); |
| |
| /* |
| * Set TxPollCtr. Each cycle is |
| * 61.44 microseconds with a 33 MHz bus |
| */ |
| writew(1,ETHER_TXPOLLCTR(dev->base_addr)); |
| |
| /* |
| * Set Rx_Ctl - Turn off reception and let RxData turn it |
| * on later |
| */ |
| writew(ETHER_RX_CTL_RXHALT_MSK,ETHER_RX_CTL(dev->base_addr)); |
| |
| } |
| |
| |
| static void ether00_set_multicast(struct net_device* dev) |
| { |
| int count=dev->mc_count; |
| |
| /* Set promiscuous mode if it's asked for. */ |
| |
| if (dev->flags&IFF_PROMISC){ |
| |
| writew( ETHER_ARC_CTL_COMPEN_MSK | |
| ETHER_ARC_CTL_BROADACC_MSK | |
| ETHER_ARC_CTL_GROUPACC_MSK | |
| ETHER_ARC_CTL_STATIONACC_MSK, |
| ETHER_ARC_CTL(dev->base_addr)); |
| return; |
| } |
| |
| /* |
| * Get all multicast packets if required, or if there are too |
| * many addresses to fit in hardware |
| */ |
| if (dev->flags & IFF_ALLMULTI){ |
| writew( ETHER_ARC_CTL_COMPEN_MSK | |
| ETHER_ARC_CTL_GROUPACC_MSK | |
| ETHER_ARC_CTL_BROADACC_MSK, |
| ETHER_ARC_CTL(dev->base_addr)); |
| return; |
| } |
| if (dev->mc_count > (ETHER_ARC_SIZE - 1)){ |
| |
| printk(KERN_WARNING "Too many multicast addresses for hardware to filter - receiving all multicast packets\n"); |
| writew( ETHER_ARC_CTL_COMPEN_MSK | |
| ETHER_ARC_CTL_GROUPACC_MSK | |
| ETHER_ARC_CTL_BROADACC_MSK, |
| ETHER_ARC_CTL(dev->base_addr)); |
| return; |
| } |
| |
| if(dev->mc_count){ |
| struct dev_mc_list *mc_list_ent=dev->mc_list; |
| unsigned int temp,i; |
| DEBUG(printk("mc_count=%d mc_list=%#x\n",dev-> mc_count, dev->mc_list)); |
| DEBUG(printk("mc addr=%02#x%02x%02x%02x%02x%02x\n", |
| mc_list_ent->dmi_addr[5], |
| mc_list_ent->dmi_addr[4], |
| mc_list_ent->dmi_addr[3], |
| mc_list_ent->dmi_addr[2], |
| mc_list_ent->dmi_addr[1], |
| mc_list_ent->dmi_addr[0]);) |
| |
| /* |
| * The first 6 bytes are the MAC address, so |
| * don't change them! |
| */ |
| writew(4,ETHER_ARC_ADR(dev->base_addr)); |
| temp=readl(ETHER_ARC_DATA(dev->base_addr)); |
| temp&=0xffff0000; |
| |
| /* Disable the current multicast stuff */ |
| writel(1,ETHER_ARC_ENA(dev->base_addr)); |
| |
| for(;;){ |
| temp|=mc_list_ent->dmi_addr[1] | |
| mc_list_ent->dmi_addr[0]<<8; |
| writel(temp,ETHER_ARC_DATA(dev->base_addr)); |
| |
| i=readl(ETHER_ARC_ADR(dev->base_addr)); |
| writew(i+4,ETHER_ARC_ADR(dev->base_addr)); |
| |
| temp=mc_list_ent->dmi_addr[5]| |
| mc_list_ent->dmi_addr[4]<<8 | |
| mc_list_ent->dmi_addr[3]<<16 | |
| mc_list_ent->dmi_addr[2]<<24; |
| writel(temp,ETHER_ARC_DATA(dev->base_addr)); |
| |
| count--; |
| if(!mc_list_ent->next || !count){ |
| break; |
| } |
| DEBUG(printk("mc_list_next=%#x\n",mc_list_ent->next);) |
| mc_list_ent=mc_list_ent->next; |
| |
| |
| i=readl(ETHER_ARC_ADR(dev->base_addr)); |
| writel(i+4,ETHER_ARC_ADR(dev->base_addr)); |
| |
| temp=mc_list_ent->dmi_addr[3]| |
| mc_list_ent->dmi_addr[2]<<8 | |
| mc_list_ent->dmi_addr[1]<<16 | |
| mc_list_ent->dmi_addr[0]<<24; |
| writel(temp,ETHER_ARC_DATA(dev->base_addr)); |
| |
| i=readl(ETHER_ARC_ADR(dev->base_addr)); |
| writel(i+4,ETHER_ARC_ADR(dev->base_addr)); |
| |
| temp=mc_list_ent->dmi_addr[4]<<16 | |
| mc_list_ent->dmi_addr[5]<<24; |
| |
| writel(temp,ETHER_ARC_DATA(dev->base_addr)); |
| |
| count--; |
| if(!mc_list_ent->next || !count){ |
| break; |
| } |
| mc_list_ent=mc_list_ent->next; |
| } |
| |
| |
| if(count) |
| printk(KERN_WARNING "Multicast list size error\n"); |
| |
| |
| writew( ETHER_ARC_CTL_BROADACC_MSK| |
| ETHER_ARC_CTL_COMPEN_MSK, |
| ETHER_ARC_CTL(dev->base_addr)); |
| |
| } |
| |
| /* enable the active ARC enties */ |
| writew((1<<(count+2))-1,ETHER_ARC_ENA(dev->base_addr)); |
| } |
| |
| |
| static int ether00_open(struct net_device* dev) |
| { |
| int result,tmp; |
| struct net_priv* priv; |
| |
| if (!is_valid_ether_addr(dev->dev_addr)) |
| return -EINVAL; |
| |
| /* Install interrupt handlers */ |
| result=request_irq(dev->irq,ether00_int,0,"ether00",dev); |
| if(result) |
| goto open_err1; |
| |
| result=request_irq(2,ether00_phy_int,0,"ether00_phy",dev); |
| if(result) |
| goto open_err2; |
| |
| ether00_reset(dev); |
| result=ether00_mem_init(dev); |
| if(result) |
| goto open_err3; |
| |
| |
| ether00_setup_ethernet_address(dev); |
| |
| ether00_set_multicast(dev); |
| |
| result=ether00_write_phy(dev,PHY_CONTROL, PHY_CONTROL_ANEGEN_MSK | PHY_CONTROL_RANEG_MSK); |
| if(result) |
| goto open_err4; |
| result=ether00_write_phy(dev,PHY_IRQ_CONTROL, PHY_IRQ_CONTROL_LS_CHG_IE_MSK | |
| PHY_IRQ_CONTROL_ANEG_COMP_IE_MSK); |
| if(result) |
| goto open_err4; |
| |
| /* Start the device enable interrupts */ |
| writew(ETHER_RX_CTL_RXEN_MSK |
| // | ETHER_RX_CTL_STRIPCRC_MSK |
| | ETHER_RX_CTL_ENGOOD_MSK |
| | ETHER_RX_CTL_ENRXPAR_MSK| ETHER_RX_CTL_ENLONGERR_MSK |
| | ETHER_RX_CTL_ENOVER_MSK| ETHER_RX_CTL_ENCRCERR_MSK, |
| ETHER_RX_CTL(dev->base_addr)); |
| |
| writew(ETHER_TX_CTL_TXEN_MSK| |
| ETHER_TX_CTL_ENEXDEFER_MSK| |
| ETHER_TX_CTL_ENLCARR_MSK| |
| ETHER_TX_CTL_ENEXCOLL_MSK| |
| ETHER_TX_CTL_ENLATECOLL_MSK| |
| ETHER_TX_CTL_ENTXPAR_MSK| |
| ETHER_TX_CTL_ENCOMP_MSK, |
| ETHER_TX_CTL(dev->base_addr)); |
| |
| tmp=readl(ETHER_DMA_CTL(dev->base_addr)); |
| writel(tmp&~ETHER_DMA_CTL_INTMASK_MSK,ETHER_DMA_CTL(dev->base_addr)); |
| |
| return 0; |
| |
| open_err4: |
| ether00_reset(dev); |
| open_err3: |
| free_irq(2,dev); |
| open_err2: |
| free_irq(dev->irq,dev); |
| open_err1: |
| return result; |
| |
| } |
| |
| |
| static int ether00_tx(struct sk_buff* skb, struct net_device* dev) |
| { |
| struct net_priv *priv=dev->priv; |
| struct tx_fda_ent *fda_ptr; |
| int i; |
| |
| |
| /* |
| * Find an empty slot in which to stick the frame |
| */ |
| fda_ptr=(struct tx_fda_ent*)__dma_va(readl(ETHER_TXFRMPTR(dev->base_addr))); |
| i=0; |
| while(i<TX_NUM_FDESC){ |
| if (fda_ptr->fd.FDStat||(fda_ptr->fd.FDCtl & FDCTL_COWNSFD_MSK)){ |
| fda_ptr =(struct tx_fda_ent*) __dma_va((struct tx_fda_ent*)fda_ptr->fd.FDNext); |
| } |
| else { |
| break; |
| } |
| i++; |
| } |
| |
| /* Write the skb data from the cache*/ |
| consistent_sync(skb->data,skb->len,PCI_DMA_TODEVICE); |
| fda_ptr->bd.BuffData=(char*)__pa(skb->data); |
| fda_ptr->bd.BuffLength=(unsigned short)skb->len; |
| /* Save the pointer to the skb for freeing later */ |
| fda_ptr->fd.FDSystem=(unsigned int)skb; |
| fda_ptr->fd.FDStat=0; |
| /* Pass ownership of the buffers to the controller */ |
| fda_ptr->fd.FDCtl=1; |
| fda_ptr->fd.FDCtl|=FDCTL_COWNSFD_MSK; |
| |
| /* If the next buffer in the list is full, stop the queue */ |
| fda_ptr=(struct tx_fda_ent*)__dma_va(fda_ptr->fd.FDNext); |
| if ((fda_ptr->fd.FDStat)||(fda_ptr->fd.FDCtl & FDCTL_COWNSFD_MSK)){ |
| netif_stop_queue(dev); |
| priv->queue_stopped=1; |
| } |
| |
| return 0; |
| } |
| |
| static struct net_device_stats *ether00_stats(struct net_device* dev) |
| { |
| struct net_priv *priv=dev->priv; |
| return &priv->stats; |
| } |
| |
| |
| static int ether00_stop(struct net_device* dev) |
| { |
| struct net_priv *priv=dev->priv; |
| int tmp; |
| |
| /* Stop/disable the device. */ |
| tmp=readw(ETHER_RX_CTL(dev->base_addr)); |
| tmp&=~(ETHER_RX_CTL_RXEN_MSK | ETHER_RX_CTL_ENGOOD_MSK); |
| tmp|=ETHER_RX_CTL_RXHALT_MSK; |
| writew(tmp,ETHER_RX_CTL(dev->base_addr)); |
| |
| tmp=readl(ETHER_TX_CTL(dev->base_addr)); |
| tmp&=~ETHER_TX_CTL_TXEN_MSK; |
| tmp|=ETHER_TX_CTL_TXHALT_MSK; |
| writel(tmp,ETHER_TX_CTL(dev->base_addr)); |
| |
| /* Free up system resources */ |
| free_irq(dev->irq,dev); |
| free_irq(2,dev); |
| iounmap(priv->dma_data); |
| |
| return 0; |
| } |
| |
| |
| static void ether00_get_ethernet_address(struct net_device* dev) |
| { |
| struct mtd_info *mymtd=NULL; |
| int i; |
| size_t retlen; |
| |
| /* |
| * For the Epxa10 dev board (camelot), the ethernet MAC |
| * address is of the form 00:aa:aa:00:xx:xx where |
| * 00:aa:aa is the Altera vendor ID and xx:xx is the |
| * last 2 bytes of the board serial number, as programmed |
| * into the OTP area of the flash device on EBI1. If this |
| * isn't an expa10 dev board, or there's no mtd support to |
| * read the serial number from flash then we'll force the |
| * use to set their own mac address using ifconfig. |
| */ |
| |
| #ifdef CONFIG_ARCH_CAMELOT |
| #ifdef CONFIG_MTD |
| /* get the mtd_info structure for the first mtd device*/ |
| for(i=0;i<MAX_MTD_DEVICES;i++){ |
| mymtd=get_mtd_device(NULL,i); |
| if(!mymtd||!strcmp(mymtd->name,"EPXA10DB flash")) |
| break; |
| } |
| |
| if(!mymtd || !mymtd->read_user_prot_reg){ |
| printk(KERN_WARNING "%s: Failed to read MAC address from flash\n",dev->name); |
| }else{ |
| mymtd->read_user_prot_reg(mymtd,2,1,&retlen,&dev->dev_addr[5]); |
| mymtd->read_user_prot_reg(mymtd,3,1,&retlen,&dev->dev_addr[4]); |
| dev->dev_addr[3]=0; |
| dev->dev_addr[2]=vendor_id[1]; |
| dev->dev_addr[1]=vendor_id[0]; |
| dev->dev_addr[0]=0; |
| } |
| #else |
| printk(KERN_WARNING "%s: MTD support required to read MAC address from EPXA10 dev board\n", dev->name); |
| #endif |
| #endif |
| |
| if (!is_valid_ether_addr(dev->dev_addr)) |
| printk("%s: Invalid ethernet MAC address. Please set using " |
| "ifconfig\n", dev->name); |
| |
| } |
| |
| /* |
| * Keep a mapping of dev_info addresses -> port lines to use when |
| * removing ports dev==NULL indicates unused entry |
| */ |
| |
| |
| static struct net_device* dev_list[ETH_NR]; |
| |
| static int ether00_add_device(struct pldhs_dev_info* dev_info,void* dev_ps_data) |
| { |
| struct net_device *dev; |
| struct net_priv *priv; |
| void *map_addr; |
| int result; |
| int i; |
| |
| i=0; |
| while(dev_list[i] && i < ETH_NR) |
| i++; |
| |
| if(i==ETH_NR){ |
| printk(KERN_WARNING "ether00: Maximum number of ports reached\n"); |
| return 0; |
| } |
| |
| |
| if (!request_mem_region(dev_info->base_addr, MAC_REG_SIZE, "ether00")) |
| return -EBUSY; |
| |
| dev = alloc_etherdev(sizeof(struct net_priv)); |
| if(!dev) { |
| result = -ENOMEM; |
| goto out_release; |
| } |
| priv = dev->priv; |
| |
| priv->tq_memupdate.routine=ether00_mem_update; |
| priv->tq_memupdate.data=(void*) dev; |
| |
| spin_lock_init(&priv->rx_lock); |
| |
| map_addr=ioremap_nocache(dev_info->base_addr,SZ_4K); |
| if(!map_addr){ |
| result = -ENOMEM; |
| out_kfree; |
| } |
| |
| dev->open=ether00_open; |
| dev->stop=ether00_stop; |
| dev->set_multicast_list=ether00_set_multicast; |
| dev->hard_start_xmit=ether00_tx; |
| dev->get_stats=ether00_stats; |
| |
| ether00_get_ethernet_address(dev); |
| |
| SET_MODULE_OWNER(dev); |
| |
| dev->base_addr=(unsigned int)map_addr; |
| dev->irq=dev_info->irq; |
| dev->features=NETIF_F_DYNALLOC | NETIF_F_HW_CSUM; |
| |
| result=register_netdev(dev); |
| if(result){ |
| printk("Ether00: Error %i registering driver\n",result); |
| goto out_unmap; |
| } |
| printk("registered ether00 device at %#x\n",dev_info->base_addr); |
| |
| dev_list[i]=dev; |
| |
| return result; |
| |
| out_unmap: |
| iounmap(map_addr); |
| out_kfree: |
| free_netdev(dev); |
| out_release: |
| release_mem_region(dev_info->base_addr, MAC_REG_SIZE); |
| return result; |
| } |
| |
| |
| static int ether00_remove_devices(void) |
| { |
| int i; |
| |
| for(i=0;i<ETH_NR;i++){ |
| if(dev_list[i]){ |
| netif_device_detach(dev_list[i]); |
| unregister_netdev(dev_list[i]); |
| iounmap((void*)dev_list[i]->base_addr); |
| release_mem_region(dev_list[i]->base_addr, MAC_REG_SIZE); |
| free_netdev(dev_list[i]); |
| dev_list[i]=0; |
| } |
| } |
| return 0; |
| } |
| |
| static struct pld_hotswap_ops ether00_pldhs_ops={ |
| .name = ETHER00_NAME, |
| .add_device = ether00_add_device, |
| .remove_devices = ether00_remove_devices, |
| }; |
| |
| |
| static void __exit ether00_cleanup_module(void) |
| { |
| int result; |
| result=ether00_remove_devices(); |
| if(result) |
| printk(KERN_WARNING "ether00: failed to remove all devices\n"); |
| |
| pldhs_unregister_driver(ETHER00_NAME); |
| } |
| module_exit(ether00_cleanup_module); |
| |
| |
| static int __init ether00_mod_init(void) |
| { |
| printk("mod init\n"); |
| return pldhs_register_driver(ðer00_pldhs_ops); |
| |
| } |
| |
| module_init(ether00_mod_init); |
| |