| /* i915_drv.h -- Private header for the I915 driver -*- linux-c -*- |
| */ |
| /* |
| * |
| * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #ifndef _I915_DRV_H_ |
| #define _I915_DRV_H_ |
| |
| #include <uapi/drm/i915_drm.h> |
| #include <uapi/drm/drm_fourcc.h> |
| |
| #include "i915_reg.h" |
| #include "intel_bios.h" |
| #include "intel_ringbuffer.h" |
| #include "intel_lrc.h" |
| #include "i915_gem_gtt.h" |
| #include "i915_gem_render_state.h" |
| #include <linux/io-mapping.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c-algo-bit.h> |
| #include <drm/intel-gtt.h> |
| #include <drm/drm_legacy.h> /* for struct drm_dma_handle */ |
| #include <drm/drm_gem.h> |
| #include <linux/backlight.h> |
| #include <linux/hashtable.h> |
| #include <linux/intel-iommu.h> |
| #include <linux/kref.h> |
| #include <linux/pm_qos.h> |
| #include "intel_guc.h" |
| |
| /* General customization: |
| */ |
| |
| #define DRIVER_NAME "i915" |
| #define DRIVER_DESC "Intel Graphics" |
| #define DRIVER_DATE "20151010" |
| |
| #undef WARN_ON |
| /* Many gcc seem to no see through this and fall over :( */ |
| #if 0 |
| #define WARN_ON(x) ({ \ |
| bool __i915_warn_cond = (x); \ |
| if (__builtin_constant_p(__i915_warn_cond)) \ |
| BUILD_BUG_ON(__i915_warn_cond); \ |
| WARN(__i915_warn_cond, "WARN_ON(" #x ")"); }) |
| #else |
| #define WARN_ON(x) WARN((x), "WARN_ON(%s)", #x ) |
| #endif |
| |
| #undef WARN_ON_ONCE |
| #define WARN_ON_ONCE(x) WARN_ONCE((x), "WARN_ON_ONCE(%s)", #x ) |
| |
| #define MISSING_CASE(x) WARN(1, "Missing switch case (%lu) in %s\n", \ |
| (long) (x), __func__); |
| |
| /* Use I915_STATE_WARN(x) and I915_STATE_WARN_ON() (rather than WARN() and |
| * WARN_ON()) for hw state sanity checks to check for unexpected conditions |
| * which may not necessarily be a user visible problem. This will either |
| * WARN() or DRM_ERROR() depending on the verbose_checks moduleparam, to |
| * enable distros and users to tailor their preferred amount of i915 abrt |
| * spam. |
| */ |
| #define I915_STATE_WARN(condition, format...) ({ \ |
| int __ret_warn_on = !!(condition); \ |
| if (unlikely(__ret_warn_on)) { \ |
| if (i915.verbose_state_checks) \ |
| WARN(1, format); \ |
| else \ |
| DRM_ERROR(format); \ |
| } \ |
| unlikely(__ret_warn_on); \ |
| }) |
| |
| #define I915_STATE_WARN_ON(condition) ({ \ |
| int __ret_warn_on = !!(condition); \ |
| if (unlikely(__ret_warn_on)) { \ |
| if (i915.verbose_state_checks) \ |
| WARN(1, "WARN_ON(" #condition ")\n"); \ |
| else \ |
| DRM_ERROR("WARN_ON(" #condition ")\n"); \ |
| } \ |
| unlikely(__ret_warn_on); \ |
| }) |
| |
| static inline const char *yesno(bool v) |
| { |
| return v ? "yes" : "no"; |
| } |
| |
| enum pipe { |
| INVALID_PIPE = -1, |
| PIPE_A = 0, |
| PIPE_B, |
| PIPE_C, |
| _PIPE_EDP, |
| I915_MAX_PIPES = _PIPE_EDP |
| }; |
| #define pipe_name(p) ((p) + 'A') |
| |
| enum transcoder { |
| TRANSCODER_A = 0, |
| TRANSCODER_B, |
| TRANSCODER_C, |
| TRANSCODER_EDP, |
| I915_MAX_TRANSCODERS |
| }; |
| #define transcoder_name(t) ((t) + 'A') |
| |
| /* |
| * I915_MAX_PLANES in the enum below is the maximum (across all platforms) |
| * number of planes per CRTC. Not all platforms really have this many planes, |
| * which means some arrays of size I915_MAX_PLANES may have unused entries |
| * between the topmost sprite plane and the cursor plane. |
| */ |
| enum plane { |
| PLANE_A = 0, |
| PLANE_B, |
| PLANE_C, |
| PLANE_CURSOR, |
| I915_MAX_PLANES, |
| }; |
| #define plane_name(p) ((p) + 'A') |
| |
| #define sprite_name(p, s) ((p) * INTEL_INFO(dev)->num_sprites[(p)] + (s) + 'A') |
| |
| enum port { |
| PORT_A = 0, |
| PORT_B, |
| PORT_C, |
| PORT_D, |
| PORT_E, |
| I915_MAX_PORTS |
| }; |
| #define port_name(p) ((p) + 'A') |
| |
| #define I915_NUM_PHYS_VLV 2 |
| |
| enum dpio_channel { |
| DPIO_CH0, |
| DPIO_CH1 |
| }; |
| |
| enum dpio_phy { |
| DPIO_PHY0, |
| DPIO_PHY1 |
| }; |
| |
| enum intel_display_power_domain { |
| POWER_DOMAIN_PIPE_A, |
| POWER_DOMAIN_PIPE_B, |
| POWER_DOMAIN_PIPE_C, |
| POWER_DOMAIN_PIPE_A_PANEL_FITTER, |
| POWER_DOMAIN_PIPE_B_PANEL_FITTER, |
| POWER_DOMAIN_PIPE_C_PANEL_FITTER, |
| POWER_DOMAIN_TRANSCODER_A, |
| POWER_DOMAIN_TRANSCODER_B, |
| POWER_DOMAIN_TRANSCODER_C, |
| POWER_DOMAIN_TRANSCODER_EDP, |
| POWER_DOMAIN_PORT_DDI_A_2_LANES, |
| POWER_DOMAIN_PORT_DDI_A_4_LANES, |
| POWER_DOMAIN_PORT_DDI_B_2_LANES, |
| POWER_DOMAIN_PORT_DDI_B_4_LANES, |
| POWER_DOMAIN_PORT_DDI_C_2_LANES, |
| POWER_DOMAIN_PORT_DDI_C_4_LANES, |
| POWER_DOMAIN_PORT_DDI_D_2_LANES, |
| POWER_DOMAIN_PORT_DDI_D_4_LANES, |
| POWER_DOMAIN_PORT_DDI_E_2_LANES, |
| POWER_DOMAIN_PORT_DSI, |
| POWER_DOMAIN_PORT_CRT, |
| POWER_DOMAIN_PORT_OTHER, |
| POWER_DOMAIN_VGA, |
| POWER_DOMAIN_AUDIO, |
| POWER_DOMAIN_PLLS, |
| POWER_DOMAIN_AUX_A, |
| POWER_DOMAIN_AUX_B, |
| POWER_DOMAIN_AUX_C, |
| POWER_DOMAIN_AUX_D, |
| POWER_DOMAIN_INIT, |
| |
| POWER_DOMAIN_NUM, |
| }; |
| |
| #define POWER_DOMAIN_PIPE(pipe) ((pipe) + POWER_DOMAIN_PIPE_A) |
| #define POWER_DOMAIN_PIPE_PANEL_FITTER(pipe) \ |
| ((pipe) + POWER_DOMAIN_PIPE_A_PANEL_FITTER) |
| #define POWER_DOMAIN_TRANSCODER(tran) \ |
| ((tran) == TRANSCODER_EDP ? POWER_DOMAIN_TRANSCODER_EDP : \ |
| (tran) + POWER_DOMAIN_TRANSCODER_A) |
| |
| enum hpd_pin { |
| HPD_NONE = 0, |
| HPD_TV = HPD_NONE, /* TV is known to be unreliable */ |
| HPD_CRT, |
| HPD_SDVO_B, |
| HPD_SDVO_C, |
| HPD_PORT_A, |
| HPD_PORT_B, |
| HPD_PORT_C, |
| HPD_PORT_D, |
| HPD_PORT_E, |
| HPD_NUM_PINS |
| }; |
| |
| #define for_each_hpd_pin(__pin) \ |
| for ((__pin) = (HPD_NONE + 1); (__pin) < HPD_NUM_PINS; (__pin)++) |
| |
| struct i915_hotplug { |
| struct work_struct hotplug_work; |
| |
| struct { |
| unsigned long last_jiffies; |
| int count; |
| enum { |
| HPD_ENABLED = 0, |
| HPD_DISABLED = 1, |
| HPD_MARK_DISABLED = 2 |
| } state; |
| } stats[HPD_NUM_PINS]; |
| u32 event_bits; |
| struct delayed_work reenable_work; |
| |
| struct intel_digital_port *irq_port[I915_MAX_PORTS]; |
| u32 long_port_mask; |
| u32 short_port_mask; |
| struct work_struct dig_port_work; |
| |
| /* |
| * if we get a HPD irq from DP and a HPD irq from non-DP |
| * the non-DP HPD could block the workqueue on a mode config |
| * mutex getting, that userspace may have taken. However |
| * userspace is waiting on the DP workqueue to run which is |
| * blocked behind the non-DP one. |
| */ |
| struct workqueue_struct *dp_wq; |
| }; |
| |
| #define I915_GEM_GPU_DOMAINS \ |
| (I915_GEM_DOMAIN_RENDER | \ |
| I915_GEM_DOMAIN_SAMPLER | \ |
| I915_GEM_DOMAIN_COMMAND | \ |
| I915_GEM_DOMAIN_INSTRUCTION | \ |
| I915_GEM_DOMAIN_VERTEX) |
| |
| #define for_each_pipe(__dev_priv, __p) \ |
| for ((__p) = 0; (__p) < INTEL_INFO(__dev_priv)->num_pipes; (__p)++) |
| #define for_each_plane(__dev_priv, __pipe, __p) \ |
| for ((__p) = 0; \ |
| (__p) < INTEL_INFO(__dev_priv)->num_sprites[(__pipe)] + 1; \ |
| (__p)++) |
| #define for_each_sprite(__dev_priv, __p, __s) \ |
| for ((__s) = 0; \ |
| (__s) < INTEL_INFO(__dev_priv)->num_sprites[(__p)]; \ |
| (__s)++) |
| |
| #define for_each_crtc(dev, crtc) \ |
| list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) |
| |
| #define for_each_intel_plane(dev, intel_plane) \ |
| list_for_each_entry(intel_plane, \ |
| &dev->mode_config.plane_list, \ |
| base.head) |
| |
| #define for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) \ |
| list_for_each_entry(intel_plane, \ |
| &(dev)->mode_config.plane_list, \ |
| base.head) \ |
| if ((intel_plane)->pipe == (intel_crtc)->pipe) |
| |
| #define for_each_intel_crtc(dev, intel_crtc) \ |
| list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, base.head) |
| |
| #define for_each_intel_encoder(dev, intel_encoder) \ |
| list_for_each_entry(intel_encoder, \ |
| &(dev)->mode_config.encoder_list, \ |
| base.head) |
| |
| #define for_each_intel_connector(dev, intel_connector) \ |
| list_for_each_entry(intel_connector, \ |
| &dev->mode_config.connector_list, \ |
| base.head) |
| |
| #define for_each_encoder_on_crtc(dev, __crtc, intel_encoder) \ |
| list_for_each_entry((intel_encoder), &(dev)->mode_config.encoder_list, base.head) \ |
| if ((intel_encoder)->base.crtc == (__crtc)) |
| |
| #define for_each_connector_on_encoder(dev, __encoder, intel_connector) \ |
| list_for_each_entry((intel_connector), &(dev)->mode_config.connector_list, base.head) \ |
| if ((intel_connector)->base.encoder == (__encoder)) |
| |
| #define for_each_power_domain(domain, mask) \ |
| for ((domain) = 0; (domain) < POWER_DOMAIN_NUM; (domain)++) \ |
| if ((1 << (domain)) & (mask)) |
| |
| struct drm_i915_private; |
| struct i915_mm_struct; |
| struct i915_mmu_object; |
| |
| struct drm_i915_file_private { |
| struct drm_i915_private *dev_priv; |
| struct drm_file *file; |
| |
| struct { |
| spinlock_t lock; |
| struct list_head request_list; |
| /* 20ms is a fairly arbitrary limit (greater than the average frame time) |
| * chosen to prevent the CPU getting more than a frame ahead of the GPU |
| * (when using lax throttling for the frontbuffer). We also use it to |
| * offer free GPU waitboosts for severely congested workloads. |
| */ |
| #define DRM_I915_THROTTLE_JIFFIES msecs_to_jiffies(20) |
| } mm; |
| struct idr context_idr; |
| |
| struct intel_rps_client { |
| struct list_head link; |
| unsigned boosts; |
| } rps; |
| |
| struct intel_engine_cs *bsd_ring; |
| }; |
| |
| enum intel_dpll_id { |
| DPLL_ID_PRIVATE = -1, /* non-shared dpll in use */ |
| /* real shared dpll ids must be >= 0 */ |
| DPLL_ID_PCH_PLL_A = 0, |
| DPLL_ID_PCH_PLL_B = 1, |
| /* hsw/bdw */ |
| DPLL_ID_WRPLL1 = 0, |
| DPLL_ID_WRPLL2 = 1, |
| /* skl */ |
| DPLL_ID_SKL_DPLL1 = 0, |
| DPLL_ID_SKL_DPLL2 = 1, |
| DPLL_ID_SKL_DPLL3 = 2, |
| }; |
| #define I915_NUM_PLLS 3 |
| |
| struct intel_dpll_hw_state { |
| /* i9xx, pch plls */ |
| uint32_t dpll; |
| uint32_t dpll_md; |
| uint32_t fp0; |
| uint32_t fp1; |
| |
| /* hsw, bdw */ |
| uint32_t wrpll; |
| |
| /* skl */ |
| /* |
| * DPLL_CTRL1 has 6 bits for each each this DPLL. We store those in |
| * lower part of ctrl1 and they get shifted into position when writing |
| * the register. This allows us to easily compare the state to share |
| * the DPLL. |
| */ |
| uint32_t ctrl1; |
| /* HDMI only, 0 when used for DP */ |
| uint32_t cfgcr1, cfgcr2; |
| |
| /* bxt */ |
| uint32_t ebb0, ebb4, pll0, pll1, pll2, pll3, pll6, pll8, pll9, pll10, |
| pcsdw12; |
| }; |
| |
| struct intel_shared_dpll_config { |
| unsigned crtc_mask; /* mask of CRTCs sharing this PLL */ |
| struct intel_dpll_hw_state hw_state; |
| }; |
| |
| struct intel_shared_dpll { |
| struct intel_shared_dpll_config config; |
| |
| int active; /* count of number of active CRTCs (i.e. DPMS on) */ |
| bool on; /* is the PLL actually active? Disabled during modeset */ |
| const char *name; |
| /* should match the index in the dev_priv->shared_dplls array */ |
| enum intel_dpll_id id; |
| /* The mode_set hook is optional and should be used together with the |
| * intel_prepare_shared_dpll function. */ |
| void (*mode_set)(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll); |
| void (*enable)(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll); |
| void (*disable)(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll); |
| bool (*get_hw_state)(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll, |
| struct intel_dpll_hw_state *hw_state); |
| }; |
| |
| #define SKL_DPLL0 0 |
| #define SKL_DPLL1 1 |
| #define SKL_DPLL2 2 |
| #define SKL_DPLL3 3 |
| |
| /* Used by dp and fdi links */ |
| struct intel_link_m_n { |
| uint32_t tu; |
| uint32_t gmch_m; |
| uint32_t gmch_n; |
| uint32_t link_m; |
| uint32_t link_n; |
| }; |
| |
| void intel_link_compute_m_n(int bpp, int nlanes, |
| int pixel_clock, int link_clock, |
| struct intel_link_m_n *m_n); |
| |
| /* Interface history: |
| * |
| * 1.1: Original. |
| * 1.2: Add Power Management |
| * 1.3: Add vblank support |
| * 1.4: Fix cmdbuffer path, add heap destroy |
| * 1.5: Add vblank pipe configuration |
| * 1.6: - New ioctl for scheduling buffer swaps on vertical blank |
| * - Support vertical blank on secondary display pipe |
| */ |
| #define DRIVER_MAJOR 1 |
| #define DRIVER_MINOR 6 |
| #define DRIVER_PATCHLEVEL 0 |
| |
| #define WATCH_LISTS 0 |
| |
| struct opregion_header; |
| struct opregion_acpi; |
| struct opregion_swsci; |
| struct opregion_asle; |
| |
| struct intel_opregion { |
| struct opregion_header *header; |
| struct opregion_acpi *acpi; |
| struct opregion_swsci *swsci; |
| u32 swsci_gbda_sub_functions; |
| u32 swsci_sbcb_sub_functions; |
| struct opregion_asle *asle; |
| void *vbt; |
| u32 *lid_state; |
| struct work_struct asle_work; |
| }; |
| #define OPREGION_SIZE (8*1024) |
| |
| struct intel_overlay; |
| struct intel_overlay_error_state; |
| |
| #define I915_FENCE_REG_NONE -1 |
| #define I915_MAX_NUM_FENCES 32 |
| /* 32 fences + sign bit for FENCE_REG_NONE */ |
| #define I915_MAX_NUM_FENCE_BITS 6 |
| |
| struct drm_i915_fence_reg { |
| struct list_head lru_list; |
| struct drm_i915_gem_object *obj; |
| int pin_count; |
| }; |
| |
| struct sdvo_device_mapping { |
| u8 initialized; |
| u8 dvo_port; |
| u8 slave_addr; |
| u8 dvo_wiring; |
| u8 i2c_pin; |
| u8 ddc_pin; |
| }; |
| |
| struct intel_display_error_state; |
| |
| struct drm_i915_error_state { |
| struct kref ref; |
| struct timeval time; |
| |
| char error_msg[128]; |
| int iommu; |
| u32 reset_count; |
| u32 suspend_count; |
| |
| /* Generic register state */ |
| u32 eir; |
| u32 pgtbl_er; |
| u32 ier; |
| u32 gtier[4]; |
| u32 ccid; |
| u32 derrmr; |
| u32 forcewake; |
| u32 error; /* gen6+ */ |
| u32 err_int; /* gen7 */ |
| u32 fault_data0; /* gen8, gen9 */ |
| u32 fault_data1; /* gen8, gen9 */ |
| u32 done_reg; |
| u32 gac_eco; |
| u32 gam_ecochk; |
| u32 gab_ctl; |
| u32 gfx_mode; |
| u32 extra_instdone[I915_NUM_INSTDONE_REG]; |
| u64 fence[I915_MAX_NUM_FENCES]; |
| struct intel_overlay_error_state *overlay; |
| struct intel_display_error_state *display; |
| struct drm_i915_error_object *semaphore_obj; |
| |
| struct drm_i915_error_ring { |
| bool valid; |
| /* Software tracked state */ |
| bool waiting; |
| int hangcheck_score; |
| enum intel_ring_hangcheck_action hangcheck_action; |
| int num_requests; |
| |
| /* our own tracking of ring head and tail */ |
| u32 cpu_ring_head; |
| u32 cpu_ring_tail; |
| |
| u32 semaphore_seqno[I915_NUM_RINGS - 1]; |
| |
| /* Register state */ |
| u32 start; |
| u32 tail; |
| u32 head; |
| u32 ctl; |
| u32 hws; |
| u32 ipeir; |
| u32 ipehr; |
| u32 instdone; |
| u32 bbstate; |
| u32 instpm; |
| u32 instps; |
| u32 seqno; |
| u64 bbaddr; |
| u64 acthd; |
| u32 fault_reg; |
| u64 faddr; |
| u32 rc_psmi; /* sleep state */ |
| u32 semaphore_mboxes[I915_NUM_RINGS - 1]; |
| |
| struct drm_i915_error_object { |
| int page_count; |
| u64 gtt_offset; |
| u32 *pages[0]; |
| } *ringbuffer, *batchbuffer, *wa_batchbuffer, *ctx, *hws_page; |
| |
| struct drm_i915_error_request { |
| long jiffies; |
| u32 seqno; |
| u32 tail; |
| } *requests; |
| |
| struct { |
| u32 gfx_mode; |
| union { |
| u64 pdp[4]; |
| u32 pp_dir_base; |
| }; |
| } vm_info; |
| |
| pid_t pid; |
| char comm[TASK_COMM_LEN]; |
| } ring[I915_NUM_RINGS]; |
| |
| struct drm_i915_error_buffer { |
| u32 size; |
| u32 name; |
| u32 rseqno[I915_NUM_RINGS], wseqno; |
| u64 gtt_offset; |
| u32 read_domains; |
| u32 write_domain; |
| s32 fence_reg:I915_MAX_NUM_FENCE_BITS; |
| s32 pinned:2; |
| u32 tiling:2; |
| u32 dirty:1; |
| u32 purgeable:1; |
| u32 userptr:1; |
| s32 ring:4; |
| u32 cache_level:3; |
| } **active_bo, **pinned_bo; |
| |
| u32 *active_bo_count, *pinned_bo_count; |
| u32 vm_count; |
| }; |
| |
| struct intel_connector; |
| struct intel_encoder; |
| struct intel_crtc_state; |
| struct intel_initial_plane_config; |
| struct intel_crtc; |
| struct intel_limit; |
| struct dpll; |
| |
| struct drm_i915_display_funcs { |
| int (*get_display_clock_speed)(struct drm_device *dev); |
| int (*get_fifo_size)(struct drm_device *dev, int plane); |
| /** |
| * find_dpll() - Find the best values for the PLL |
| * @limit: limits for the PLL |
| * @crtc: current CRTC |
| * @target: target frequency in kHz |
| * @refclk: reference clock frequency in kHz |
| * @match_clock: if provided, @best_clock P divider must |
| * match the P divider from @match_clock |
| * used for LVDS downclocking |
| * @best_clock: best PLL values found |
| * |
| * Returns true on success, false on failure. |
| */ |
| bool (*find_dpll)(const struct intel_limit *limit, |
| struct intel_crtc_state *crtc_state, |
| int target, int refclk, |
| struct dpll *match_clock, |
| struct dpll *best_clock); |
| void (*update_wm)(struct drm_crtc *crtc); |
| void (*update_sprite_wm)(struct drm_plane *plane, |
| struct drm_crtc *crtc, |
| uint32_t sprite_width, uint32_t sprite_height, |
| int pixel_size, bool enable, bool scaled); |
| int (*modeset_calc_cdclk)(struct drm_atomic_state *state); |
| void (*modeset_commit_cdclk)(struct drm_atomic_state *state); |
| /* Returns the active state of the crtc, and if the crtc is active, |
| * fills out the pipe-config with the hw state. */ |
| bool (*get_pipe_config)(struct intel_crtc *, |
| struct intel_crtc_state *); |
| void (*get_initial_plane_config)(struct intel_crtc *, |
| struct intel_initial_plane_config *); |
| int (*crtc_compute_clock)(struct intel_crtc *crtc, |
| struct intel_crtc_state *crtc_state); |
| void (*crtc_enable)(struct drm_crtc *crtc); |
| void (*crtc_disable)(struct drm_crtc *crtc); |
| void (*audio_codec_enable)(struct drm_connector *connector, |
| struct intel_encoder *encoder, |
| const struct drm_display_mode *adjusted_mode); |
| void (*audio_codec_disable)(struct intel_encoder *encoder); |
| void (*fdi_link_train)(struct drm_crtc *crtc); |
| void (*init_clock_gating)(struct drm_device *dev); |
| int (*queue_flip)(struct drm_device *dev, struct drm_crtc *crtc, |
| struct drm_framebuffer *fb, |
| struct drm_i915_gem_object *obj, |
| struct drm_i915_gem_request *req, |
| uint32_t flags); |
| void (*update_primary_plane)(struct drm_crtc *crtc, |
| struct drm_framebuffer *fb, |
| int x, int y); |
| void (*hpd_irq_setup)(struct drm_device *dev); |
| /* clock updates for mode set */ |
| /* cursor updates */ |
| /* render clock increase/decrease */ |
| /* display clock increase/decrease */ |
| /* pll clock increase/decrease */ |
| }; |
| |
| enum forcewake_domain_id { |
| FW_DOMAIN_ID_RENDER = 0, |
| FW_DOMAIN_ID_BLITTER, |
| FW_DOMAIN_ID_MEDIA, |
| |
| FW_DOMAIN_ID_COUNT |
| }; |
| |
| enum forcewake_domains { |
| FORCEWAKE_RENDER = (1 << FW_DOMAIN_ID_RENDER), |
| FORCEWAKE_BLITTER = (1 << FW_DOMAIN_ID_BLITTER), |
| FORCEWAKE_MEDIA = (1 << FW_DOMAIN_ID_MEDIA), |
| FORCEWAKE_ALL = (FORCEWAKE_RENDER | |
| FORCEWAKE_BLITTER | |
| FORCEWAKE_MEDIA) |
| }; |
| |
| struct intel_uncore_funcs { |
| void (*force_wake_get)(struct drm_i915_private *dev_priv, |
| enum forcewake_domains domains); |
| void (*force_wake_put)(struct drm_i915_private *dev_priv, |
| enum forcewake_domains domains); |
| |
| uint8_t (*mmio_readb)(struct drm_i915_private *dev_priv, off_t offset, bool trace); |
| uint16_t (*mmio_readw)(struct drm_i915_private *dev_priv, off_t offset, bool trace); |
| uint32_t (*mmio_readl)(struct drm_i915_private *dev_priv, off_t offset, bool trace); |
| uint64_t (*mmio_readq)(struct drm_i915_private *dev_priv, off_t offset, bool trace); |
| |
| void (*mmio_writeb)(struct drm_i915_private *dev_priv, off_t offset, |
| uint8_t val, bool trace); |
| void (*mmio_writew)(struct drm_i915_private *dev_priv, off_t offset, |
| uint16_t val, bool trace); |
| void (*mmio_writel)(struct drm_i915_private *dev_priv, off_t offset, |
| uint32_t val, bool trace); |
| void (*mmio_writeq)(struct drm_i915_private *dev_priv, off_t offset, |
| uint64_t val, bool trace); |
| }; |
| |
| struct intel_uncore { |
| spinlock_t lock; /** lock is also taken in irq contexts. */ |
| |
| struct intel_uncore_funcs funcs; |
| |
| unsigned fifo_count; |
| enum forcewake_domains fw_domains; |
| |
| struct intel_uncore_forcewake_domain { |
| struct drm_i915_private *i915; |
| enum forcewake_domain_id id; |
| unsigned wake_count; |
| struct timer_list timer; |
| u32 reg_set; |
| u32 val_set; |
| u32 val_clear; |
| u32 reg_ack; |
| u32 reg_post; |
| u32 val_reset; |
| } fw_domain[FW_DOMAIN_ID_COUNT]; |
| }; |
| |
| /* Iterate over initialised fw domains */ |
| #define for_each_fw_domain_mask(domain__, mask__, dev_priv__, i__) \ |
| for ((i__) = 0, (domain__) = &(dev_priv__)->uncore.fw_domain[0]; \ |
| (i__) < FW_DOMAIN_ID_COUNT; \ |
| (i__)++, (domain__) = &(dev_priv__)->uncore.fw_domain[i__]) \ |
| if (((mask__) & (dev_priv__)->uncore.fw_domains) & (1 << (i__))) |
| |
| #define for_each_fw_domain(domain__, dev_priv__, i__) \ |
| for_each_fw_domain_mask(domain__, FORCEWAKE_ALL, dev_priv__, i__) |
| |
| enum csr_state { |
| FW_UNINITIALIZED = 0, |
| FW_LOADED, |
| FW_FAILED |
| }; |
| |
| struct intel_csr { |
| const char *fw_path; |
| uint32_t *dmc_payload; |
| uint32_t dmc_fw_size; |
| uint32_t mmio_count; |
| uint32_t mmioaddr[8]; |
| uint32_t mmiodata[8]; |
| enum csr_state state; |
| }; |
| |
| #define DEV_INFO_FOR_EACH_FLAG(func, sep) \ |
| func(is_mobile) sep \ |
| func(is_i85x) sep \ |
| func(is_i915g) sep \ |
| func(is_i945gm) sep \ |
| func(is_g33) sep \ |
| func(need_gfx_hws) sep \ |
| func(is_g4x) sep \ |
| func(is_pineview) sep \ |
| func(is_broadwater) sep \ |
| func(is_crestline) sep \ |
| func(is_ivybridge) sep \ |
| func(is_valleyview) sep \ |
| func(is_haswell) sep \ |
| func(is_skylake) sep \ |
| func(is_preliminary) sep \ |
| func(has_fbc) sep \ |
| func(has_pipe_cxsr) sep \ |
| func(has_hotplug) sep \ |
| func(cursor_needs_physical) sep \ |
| func(has_overlay) sep \ |
| func(overlay_needs_physical) sep \ |
| func(supports_tv) sep \ |
| func(has_llc) sep \ |
| func(has_ddi) sep \ |
| func(has_fpga_dbg) |
| |
| #define DEFINE_FLAG(name) u8 name:1 |
| #define SEP_SEMICOLON ; |
| |
| struct intel_device_info { |
| u32 display_mmio_offset; |
| u16 device_id; |
| u8 num_pipes:3; |
| u8 num_sprites[I915_MAX_PIPES]; |
| u8 gen; |
| u8 ring_mask; /* Rings supported by the HW */ |
| DEV_INFO_FOR_EACH_FLAG(DEFINE_FLAG, SEP_SEMICOLON); |
| /* Register offsets for the various display pipes and transcoders */ |
| int pipe_offsets[I915_MAX_TRANSCODERS]; |
| int trans_offsets[I915_MAX_TRANSCODERS]; |
| int palette_offsets[I915_MAX_PIPES]; |
| int cursor_offsets[I915_MAX_PIPES]; |
| |
| /* Slice/subslice/EU info */ |
| u8 slice_total; |
| u8 subslice_total; |
| u8 subslice_per_slice; |
| u8 eu_total; |
| u8 eu_per_subslice; |
| /* For each slice, which subslice(s) has(have) 7 EUs (bitfield)? */ |
| u8 subslice_7eu[3]; |
| u8 has_slice_pg:1; |
| u8 has_subslice_pg:1; |
| u8 has_eu_pg:1; |
| }; |
| |
| #undef DEFINE_FLAG |
| #undef SEP_SEMICOLON |
| |
| enum i915_cache_level { |
| I915_CACHE_NONE = 0, |
| I915_CACHE_LLC, /* also used for snoopable memory on non-LLC */ |
| I915_CACHE_L3_LLC, /* gen7+, L3 sits between the domain specifc |
| caches, eg sampler/render caches, and the |
| large Last-Level-Cache. LLC is coherent with |
| the CPU, but L3 is only visible to the GPU. */ |
| I915_CACHE_WT, /* hsw:gt3e WriteThrough for scanouts */ |
| }; |
| |
| struct i915_ctx_hang_stats { |
| /* This context had batch pending when hang was declared */ |
| unsigned batch_pending; |
| |
| /* This context had batch active when hang was declared */ |
| unsigned batch_active; |
| |
| /* Time when this context was last blamed for a GPU reset */ |
| unsigned long guilty_ts; |
| |
| /* If the contexts causes a second GPU hang within this time, |
| * it is permanently banned from submitting any more work. |
| */ |
| unsigned long ban_period_seconds; |
| |
| /* This context is banned to submit more work */ |
| bool banned; |
| }; |
| |
| /* This must match up with the value previously used for execbuf2.rsvd1. */ |
| #define DEFAULT_CONTEXT_HANDLE 0 |
| |
| #define CONTEXT_NO_ZEROMAP (1<<0) |
| /** |
| * struct intel_context - as the name implies, represents a context. |
| * @ref: reference count. |
| * @user_handle: userspace tracking identity for this context. |
| * @remap_slice: l3 row remapping information. |
| * @flags: context specific flags: |
| * CONTEXT_NO_ZEROMAP: do not allow mapping things to page 0. |
| * @file_priv: filp associated with this context (NULL for global default |
| * context). |
| * @hang_stats: information about the role of this context in possible GPU |
| * hangs. |
| * @ppgtt: virtual memory space used by this context. |
| * @legacy_hw_ctx: render context backing object and whether it is correctly |
| * initialized (legacy ring submission mechanism only). |
| * @link: link in the global list of contexts. |
| * |
| * Contexts are memory images used by the hardware to store copies of their |
| * internal state. |
| */ |
| struct intel_context { |
| struct kref ref; |
| int user_handle; |
| uint8_t remap_slice; |
| struct drm_i915_private *i915; |
| int flags; |
| struct drm_i915_file_private *file_priv; |
| struct i915_ctx_hang_stats hang_stats; |
| struct i915_hw_ppgtt *ppgtt; |
| |
| /* Legacy ring buffer submission */ |
| struct { |
| struct drm_i915_gem_object *rcs_state; |
| bool initialized; |
| } legacy_hw_ctx; |
| |
| /* Execlists */ |
| struct { |
| struct drm_i915_gem_object *state; |
| struct intel_ringbuffer *ringbuf; |
| int pin_count; |
| } engine[I915_NUM_RINGS]; |
| |
| struct list_head link; |
| }; |
| |
| enum fb_op_origin { |
| ORIGIN_GTT, |
| ORIGIN_CPU, |
| ORIGIN_CS, |
| ORIGIN_FLIP, |
| ORIGIN_DIRTYFB, |
| }; |
| |
| struct i915_fbc { |
| /* This is always the inner lock when overlapping with struct_mutex and |
| * it's the outer lock when overlapping with stolen_lock. */ |
| struct mutex lock; |
| unsigned long uncompressed_size; |
| unsigned threshold; |
| unsigned int fb_id; |
| unsigned int possible_framebuffer_bits; |
| unsigned int busy_bits; |
| struct intel_crtc *crtc; |
| int y; |
| |
| struct drm_mm_node compressed_fb; |
| struct drm_mm_node *compressed_llb; |
| |
| bool false_color; |
| |
| /* Tracks whether the HW is actually enabled, not whether the feature is |
| * possible. */ |
| bool enabled; |
| |
| struct intel_fbc_work { |
| struct delayed_work work; |
| struct intel_crtc *crtc; |
| struct drm_framebuffer *fb; |
| } *fbc_work; |
| |
| enum no_fbc_reason { |
| FBC_OK, /* FBC is enabled */ |
| FBC_UNSUPPORTED, /* FBC is not supported by this chipset */ |
| FBC_NO_OUTPUT, /* no outputs enabled to compress */ |
| FBC_STOLEN_TOO_SMALL, /* not enough space for buffers */ |
| FBC_UNSUPPORTED_MODE, /* interlace or doublescanned mode */ |
| FBC_MODE_TOO_LARGE, /* mode too large for compression */ |
| FBC_BAD_PLANE, /* fbc not supported on plane */ |
| FBC_NOT_TILED, /* buffer not tiled */ |
| FBC_MULTIPLE_PIPES, /* more than one pipe active */ |
| FBC_MODULE_PARAM, |
| FBC_CHIP_DEFAULT, /* disabled by default on this chip */ |
| FBC_ROTATION, /* rotation is not supported */ |
| FBC_IN_DBG_MASTER, /* kernel debugger is active */ |
| FBC_BAD_STRIDE, /* stride is not supported */ |
| FBC_PIXEL_RATE, /* pixel rate is too big */ |
| FBC_PIXEL_FORMAT /* pixel format is invalid */ |
| } no_fbc_reason; |
| |
| bool (*fbc_enabled)(struct drm_i915_private *dev_priv); |
| void (*enable_fbc)(struct intel_crtc *crtc); |
| void (*disable_fbc)(struct drm_i915_private *dev_priv); |
| }; |
| |
| /** |
| * HIGH_RR is the highest eDP panel refresh rate read from EDID |
| * LOW_RR is the lowest eDP panel refresh rate found from EDID |
| * parsing for same resolution. |
| */ |
| enum drrs_refresh_rate_type { |
| DRRS_HIGH_RR, |
| DRRS_LOW_RR, |
| DRRS_MAX_RR, /* RR count */ |
| }; |
| |
| enum drrs_support_type { |
| DRRS_NOT_SUPPORTED = 0, |
| STATIC_DRRS_SUPPORT = 1, |
| SEAMLESS_DRRS_SUPPORT = 2 |
| }; |
| |
| struct intel_dp; |
| struct i915_drrs { |
| struct mutex mutex; |
| struct delayed_work work; |
| struct intel_dp *dp; |
| unsigned busy_frontbuffer_bits; |
| enum drrs_refresh_rate_type refresh_rate_type; |
| enum drrs_support_type type; |
| }; |
| |
| struct i915_psr { |
| struct mutex lock; |
| bool sink_support; |
| bool source_ok; |
| struct intel_dp *enabled; |
| bool active; |
| struct delayed_work work; |
| unsigned busy_frontbuffer_bits; |
| bool psr2_support; |
| bool aux_frame_sync; |
| }; |
| |
| enum intel_pch { |
| PCH_NONE = 0, /* No PCH present */ |
| PCH_IBX, /* Ibexpeak PCH */ |
| PCH_CPT, /* Cougarpoint PCH */ |
| PCH_LPT, /* Lynxpoint PCH */ |
| PCH_SPT, /* Sunrisepoint PCH */ |
| PCH_NOP, |
| }; |
| |
| enum intel_sbi_destination { |
| SBI_ICLK, |
| SBI_MPHY, |
| }; |
| |
| #define QUIRK_PIPEA_FORCE (1<<0) |
| #define QUIRK_LVDS_SSC_DISABLE (1<<1) |
| #define QUIRK_INVERT_BRIGHTNESS (1<<2) |
| #define QUIRK_BACKLIGHT_PRESENT (1<<3) |
| #define QUIRK_PIPEB_FORCE (1<<4) |
| #define QUIRK_PIN_SWIZZLED_PAGES (1<<5) |
| |
| struct intel_fbdev; |
| struct intel_fbc_work; |
| |
| struct intel_gmbus { |
| struct i2c_adapter adapter; |
| u32 force_bit; |
| u32 reg0; |
| u32 gpio_reg; |
| struct i2c_algo_bit_data bit_algo; |
| struct drm_i915_private *dev_priv; |
| }; |
| |
| struct i915_suspend_saved_registers { |
| u32 saveDSPARB; |
| u32 saveLVDS; |
| u32 savePP_ON_DELAYS; |
| u32 savePP_OFF_DELAYS; |
| u32 savePP_ON; |
| u32 savePP_OFF; |
| u32 savePP_CONTROL; |
| u32 savePP_DIVISOR; |
| u32 saveFBC_CONTROL; |
| u32 saveCACHE_MODE_0; |
| u32 saveMI_ARB_STATE; |
| u32 saveSWF0[16]; |
| u32 saveSWF1[16]; |
| u32 saveSWF3[3]; |
| uint64_t saveFENCE[I915_MAX_NUM_FENCES]; |
| u32 savePCH_PORT_HOTPLUG; |
| u16 saveGCDGMBUS; |
| }; |
| |
| struct vlv_s0ix_state { |
| /* GAM */ |
| u32 wr_watermark; |
| u32 gfx_prio_ctrl; |
| u32 arb_mode; |
| u32 gfx_pend_tlb0; |
| u32 gfx_pend_tlb1; |
| u32 lra_limits[GEN7_LRA_LIMITS_REG_NUM]; |
| u32 media_max_req_count; |
| u32 gfx_max_req_count; |
| u32 render_hwsp; |
| u32 ecochk; |
| u32 bsd_hwsp; |
| u32 blt_hwsp; |
| u32 tlb_rd_addr; |
| |
| /* MBC */ |
| u32 g3dctl; |
| u32 gsckgctl; |
| u32 mbctl; |
| |
| /* GCP */ |
| u32 ucgctl1; |
| u32 ucgctl3; |
| u32 rcgctl1; |
| u32 rcgctl2; |
| u32 rstctl; |
| u32 misccpctl; |
| |
| /* GPM */ |
| u32 gfxpause; |
| u32 rpdeuhwtc; |
| u32 rpdeuc; |
| u32 ecobus; |
| u32 pwrdwnupctl; |
| u32 rp_down_timeout; |
| u32 rp_deucsw; |
| u32 rcubmabdtmr; |
| u32 rcedata; |
| u32 spare2gh; |
| |
| /* Display 1 CZ domain */ |
| u32 gt_imr; |
| u32 gt_ier; |
| u32 pm_imr; |
| u32 pm_ier; |
| u32 gt_scratch[GEN7_GT_SCRATCH_REG_NUM]; |
| |
| /* GT SA CZ domain */ |
| u32 tilectl; |
| u32 gt_fifoctl; |
| u32 gtlc_wake_ctrl; |
| u32 gtlc_survive; |
| u32 pmwgicz; |
| |
| /* Display 2 CZ domain */ |
| u32 gu_ctl0; |
| u32 gu_ctl1; |
| u32 pcbr; |
| u32 clock_gate_dis2; |
| }; |
| |
| struct intel_rps_ei { |
| u32 cz_clock; |
| u32 render_c0; |
| u32 media_c0; |
| }; |
| |
| struct intel_gen6_power_mgmt { |
| /* |
| * work, interrupts_enabled and pm_iir are protected by |
| * dev_priv->irq_lock |
| */ |
| struct work_struct work; |
| bool interrupts_enabled; |
| u32 pm_iir; |
| |
| /* Frequencies are stored in potentially platform dependent multiples. |
| * In other words, *_freq needs to be multiplied by X to be interesting. |
| * Soft limits are those which are used for the dynamic reclocking done |
| * by the driver (raise frequencies under heavy loads, and lower for |
| * lighter loads). Hard limits are those imposed by the hardware. |
| * |
| * A distinction is made for overclocking, which is never enabled by |
| * default, and is considered to be above the hard limit if it's |
| * possible at all. |
| */ |
| u8 cur_freq; /* Current frequency (cached, may not == HW) */ |
| u8 min_freq_softlimit; /* Minimum frequency permitted by the driver */ |
| u8 max_freq_softlimit; /* Max frequency permitted by the driver */ |
| u8 max_freq; /* Maximum frequency, RP0 if not overclocking */ |
| u8 min_freq; /* AKA RPn. Minimum frequency */ |
| u8 idle_freq; /* Frequency to request when we are idle */ |
| u8 efficient_freq; /* AKA RPe. Pre-determined balanced frequency */ |
| u8 rp1_freq; /* "less than" RP0 power/freqency */ |
| u8 rp0_freq; /* Non-overclocked max frequency. */ |
| |
| u8 up_threshold; /* Current %busy required to uplock */ |
| u8 down_threshold; /* Current %busy required to downclock */ |
| |
| int last_adj; |
| enum { LOW_POWER, BETWEEN, HIGH_POWER } power; |
| |
| spinlock_t client_lock; |
| struct list_head clients; |
| bool client_boost; |
| |
| bool enabled; |
| struct delayed_work delayed_resume_work; |
| unsigned boosts; |
| |
| struct intel_rps_client semaphores, mmioflips; |
| |
| /* manual wa residency calculations */ |
| struct intel_rps_ei up_ei, down_ei; |
| |
| /* |
| * Protects RPS/RC6 register access and PCU communication. |
| * Must be taken after struct_mutex if nested. Note that |
| * this lock may be held for long periods of time when |
| * talking to hw - so only take it when talking to hw! |
| */ |
| struct mutex hw_lock; |
| }; |
| |
| /* defined intel_pm.c */ |
| extern spinlock_t mchdev_lock; |
| |
| struct intel_ilk_power_mgmt { |
| u8 cur_delay; |
| u8 min_delay; |
| u8 max_delay; |
| u8 fmax; |
| u8 fstart; |
| |
| u64 last_count1; |
| unsigned long last_time1; |
| unsigned long chipset_power; |
| u64 last_count2; |
| u64 last_time2; |
| unsigned long gfx_power; |
| u8 corr; |
| |
| int c_m; |
| int r_t; |
| }; |
| |
| struct drm_i915_private; |
| struct i915_power_well; |
| |
| struct i915_power_well_ops { |
| /* |
| * Synchronize the well's hw state to match the current sw state, for |
| * example enable/disable it based on the current refcount. Called |
| * during driver init and resume time, possibly after first calling |
| * the enable/disable handlers. |
| */ |
| void (*sync_hw)(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well); |
| /* |
| * Enable the well and resources that depend on it (for example |
| * interrupts located on the well). Called after the 0->1 refcount |
| * transition. |
| */ |
| void (*enable)(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well); |
| /* |
| * Disable the well and resources that depend on it. Called after |
| * the 1->0 refcount transition. |
| */ |
| void (*disable)(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well); |
| /* Returns the hw enabled state. */ |
| bool (*is_enabled)(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well); |
| }; |
| |
| /* Power well structure for haswell */ |
| struct i915_power_well { |
| const char *name; |
| bool always_on; |
| /* power well enable/disable usage count */ |
| int count; |
| /* cached hw enabled state */ |
| bool hw_enabled; |
| unsigned long domains; |
| unsigned long data; |
| const struct i915_power_well_ops *ops; |
| }; |
| |
| struct i915_power_domains { |
| /* |
| * Power wells needed for initialization at driver init and suspend |
| * time are on. They are kept on until after the first modeset. |
| */ |
| bool init_power_on; |
| bool initializing; |
| int power_well_count; |
| |
| struct mutex lock; |
| int domain_use_count[POWER_DOMAIN_NUM]; |
| struct i915_power_well *power_wells; |
| }; |
| |
| #define MAX_L3_SLICES 2 |
| struct intel_l3_parity { |
| u32 *remap_info[MAX_L3_SLICES]; |
| struct work_struct error_work; |
| int which_slice; |
| }; |
| |
| struct i915_gem_mm { |
| /** Memory allocator for GTT stolen memory */ |
| struct drm_mm stolen; |
| /** Protects the usage of the GTT stolen memory allocator. This is |
| * always the inner lock when overlapping with struct_mutex. */ |
| struct mutex stolen_lock; |
| |
| /** List of all objects in gtt_space. Used to restore gtt |
| * mappings on resume */ |
| struct list_head bound_list; |
| /** |
| * List of objects which are not bound to the GTT (thus |
| * are idle and not used by the GPU) but still have |
| * (presumably uncached) pages still attached. |
| */ |
| struct list_head unbound_list; |
| |
| /** Usable portion of the GTT for GEM */ |
| unsigned long stolen_base; /* limited to low memory (32-bit) */ |
| |
| /** PPGTT used for aliasing the PPGTT with the GTT */ |
| struct i915_hw_ppgtt *aliasing_ppgtt; |
| |
| struct notifier_block oom_notifier; |
| struct shrinker shrinker; |
| bool shrinker_no_lock_stealing; |
| |
| /** LRU list of objects with fence regs on them. */ |
| struct list_head fence_list; |
| |
| /** |
| * We leave the user IRQ off as much as possible, |
| * but this means that requests will finish and never |
| * be retired once the system goes idle. Set a timer to |
| * fire periodically while the ring is running. When it |
| * fires, go retire requests. |
| */ |
| struct delayed_work retire_work; |
| |
| /** |
| * When we detect an idle GPU, we want to turn on |
| * powersaving features. So once we see that there |
| * are no more requests outstanding and no more |
| * arrive within a small period of time, we fire |
| * off the idle_work. |
| */ |
| struct delayed_work idle_work; |
| |
| /** |
| * Are we in a non-interruptible section of code like |
| * modesetting? |
| */ |
| bool interruptible; |
| |
| /** |
| * Is the GPU currently considered idle, or busy executing userspace |
| * requests? Whilst idle, we attempt to power down the hardware and |
| * display clocks. In order to reduce the effect on performance, there |
| * is a slight delay before we do so. |
| */ |
| bool busy; |
| |
| /* the indicator for dispatch video commands on two BSD rings */ |
| int bsd_ring_dispatch_index; |
| |
| /** Bit 6 swizzling required for X tiling */ |
| uint32_t bit_6_swizzle_x; |
| /** Bit 6 swizzling required for Y tiling */ |
| uint32_t bit_6_swizzle_y; |
| |
| /* accounting, useful for userland debugging */ |
| spinlock_t object_stat_lock; |
| size_t object_memory; |
| u32 object_count; |
| }; |
| |
| struct drm_i915_error_state_buf { |
| struct drm_i915_private *i915; |
| unsigned bytes; |
| unsigned size; |
| int err; |
| u8 *buf; |
| loff_t start; |
| loff_t pos; |
| }; |
| |
| struct i915_error_state_file_priv { |
| struct drm_device *dev; |
| struct drm_i915_error_state *error; |
| }; |
| |
| struct i915_gpu_error { |
| /* For hangcheck timer */ |
| #define DRM_I915_HANGCHECK_PERIOD 1500 /* in ms */ |
| #define DRM_I915_HANGCHECK_JIFFIES msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD) |
| /* Hang gpu twice in this window and your context gets banned */ |
| #define DRM_I915_CTX_BAN_PERIOD DIV_ROUND_UP(8*DRM_I915_HANGCHECK_PERIOD, 1000) |
| |
| struct workqueue_struct *hangcheck_wq; |
| struct delayed_work hangcheck_work; |
| |
| /* For reset and error_state handling. */ |
| spinlock_t lock; |
| /* Protected by the above dev->gpu_error.lock. */ |
| struct drm_i915_error_state *first_error; |
| |
| unsigned long missed_irq_rings; |
| |
| /** |
| * State variable controlling the reset flow and count |
| * |
| * This is a counter which gets incremented when reset is triggered, |
| * and again when reset has been handled. So odd values (lowest bit set) |
| * means that reset is in progress and even values that |
| * (reset_counter >> 1):th reset was successfully completed. |
| * |
| * If reset is not completed succesfully, the I915_WEDGE bit is |
| * set meaning that hardware is terminally sour and there is no |
| * recovery. All waiters on the reset_queue will be woken when |
| * that happens. |
| * |
| * This counter is used by the wait_seqno code to notice that reset |
| * event happened and it needs to restart the entire ioctl (since most |
| * likely the seqno it waited for won't ever signal anytime soon). |
| * |
| * This is important for lock-free wait paths, where no contended lock |
| * naturally enforces the correct ordering between the bail-out of the |
| * waiter and the gpu reset work code. |
| */ |
| atomic_t reset_counter; |
| |
| #define I915_RESET_IN_PROGRESS_FLAG 1 |
| #define I915_WEDGED (1 << 31) |
| |
| /** |
| * Waitqueue to signal when the reset has completed. Used by clients |
| * that wait for dev_priv->mm.wedged to settle. |
| */ |
| wait_queue_head_t reset_queue; |
| |
| /* Userspace knobs for gpu hang simulation; |
| * combines both a ring mask, and extra flags |
| */ |
| u32 stop_rings; |
| #define I915_STOP_RING_ALLOW_BAN (1 << 31) |
| #define I915_STOP_RING_ALLOW_WARN (1 << 30) |
| |
| /* For missed irq/seqno simulation. */ |
| unsigned int test_irq_rings; |
| |
| /* Used to prevent gem_check_wedged returning -EAGAIN during gpu reset */ |
| bool reload_in_reset; |
| }; |
| |
| enum modeset_restore { |
| MODESET_ON_LID_OPEN, |
| MODESET_DONE, |
| MODESET_SUSPENDED, |
| }; |
| |
| #define DP_AUX_A 0x40 |
| #define DP_AUX_B 0x10 |
| #define DP_AUX_C 0x20 |
| #define DP_AUX_D 0x30 |
| |
| #define DDC_PIN_B 0x05 |
| #define DDC_PIN_C 0x04 |
| #define DDC_PIN_D 0x06 |
| |
| struct ddi_vbt_port_info { |
| /* |
| * This is an index in the HDMI/DVI DDI buffer translation table. |
| * The special value HDMI_LEVEL_SHIFT_UNKNOWN means the VBT didn't |
| * populate this field. |
| */ |
| #define HDMI_LEVEL_SHIFT_UNKNOWN 0xff |
| uint8_t hdmi_level_shift; |
| |
| uint8_t supports_dvi:1; |
| uint8_t supports_hdmi:1; |
| uint8_t supports_dp:1; |
| |
| uint8_t alternate_aux_channel; |
| uint8_t alternate_ddc_pin; |
| |
| uint8_t dp_boost_level; |
| uint8_t hdmi_boost_level; |
| }; |
| |
| enum psr_lines_to_wait { |
| PSR_0_LINES_TO_WAIT = 0, |
| PSR_1_LINE_TO_WAIT, |
| PSR_4_LINES_TO_WAIT, |
| PSR_8_LINES_TO_WAIT |
| }; |
| |
| struct intel_vbt_data { |
| struct drm_display_mode *lfp_lvds_vbt_mode; /* if any */ |
| struct drm_display_mode *sdvo_lvds_vbt_mode; /* if any */ |
| |
| /* Feature bits */ |
| unsigned int int_tv_support:1; |
| unsigned int lvds_dither:1; |
| unsigned int lvds_vbt:1; |
| unsigned int int_crt_support:1; |
| unsigned int lvds_use_ssc:1; |
| unsigned int display_clock_mode:1; |
| unsigned int fdi_rx_polarity_inverted:1; |
| unsigned int has_mipi:1; |
| int lvds_ssc_freq; |
| unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */ |
| |
| enum drrs_support_type drrs_type; |
| |
| /* eDP */ |
| int edp_rate; |
| int edp_lanes; |
| int edp_preemphasis; |
| int edp_vswing; |
| bool edp_initialized; |
| bool edp_support; |
| int edp_bpp; |
| struct edp_power_seq edp_pps; |
| |
| struct { |
| bool full_link; |
| bool require_aux_wakeup; |
| int idle_frames; |
| enum psr_lines_to_wait lines_to_wait; |
| int tp1_wakeup_time; |
| int tp2_tp3_wakeup_time; |
| } psr; |
| |
| struct { |
| u16 pwm_freq_hz; |
| bool present; |
| bool active_low_pwm; |
| u8 min_brightness; /* min_brightness/255 of max */ |
| } backlight; |
| |
| /* MIPI DSI */ |
| struct { |
| u16 port; |
| u16 panel_id; |
| struct mipi_config *config; |
| struct mipi_pps_data *pps; |
| u8 seq_version; |
| u32 size; |
| u8 *data; |
| u8 *sequence[MIPI_SEQ_MAX]; |
| } dsi; |
| |
| int crt_ddc_pin; |
| |
| int child_dev_num; |
| union child_device_config *child_dev; |
| |
| struct ddi_vbt_port_info ddi_port_info[I915_MAX_PORTS]; |
| }; |
| |
| enum intel_ddb_partitioning { |
| INTEL_DDB_PART_1_2, |
| INTEL_DDB_PART_5_6, /* IVB+ */ |
| }; |
| |
| struct intel_wm_level { |
| bool enable; |
| uint32_t pri_val; |
| uint32_t spr_val; |
| uint32_t cur_val; |
| uint32_t fbc_val; |
| }; |
| |
| struct ilk_wm_values { |
| uint32_t wm_pipe[3]; |
| uint32_t wm_lp[3]; |
| uint32_t wm_lp_spr[3]; |
| uint32_t wm_linetime[3]; |
| bool enable_fbc_wm; |
| enum intel_ddb_partitioning partitioning; |
| }; |
| |
| struct vlv_pipe_wm { |
| uint16_t primary; |
| uint16_t sprite[2]; |
| uint8_t cursor; |
| }; |
| |
| struct vlv_sr_wm { |
| uint16_t plane; |
| uint8_t cursor; |
| }; |
| |
| struct vlv_wm_values { |
| struct vlv_pipe_wm pipe[3]; |
| struct vlv_sr_wm sr; |
| struct { |
| uint8_t cursor; |
| uint8_t sprite[2]; |
| uint8_t primary; |
| } ddl[3]; |
| uint8_t level; |
| bool cxsr; |
| }; |
| |
| struct skl_ddb_entry { |
| uint16_t start, end; /* in number of blocks, 'end' is exclusive */ |
| }; |
| |
| static inline uint16_t skl_ddb_entry_size(const struct skl_ddb_entry *entry) |
| { |
| return entry->end - entry->start; |
| } |
| |
| static inline bool skl_ddb_entry_equal(const struct skl_ddb_entry *e1, |
| const struct skl_ddb_entry *e2) |
| { |
| if (e1->start == e2->start && e1->end == e2->end) |
| return true; |
| |
| return false; |
| } |
| |
| struct skl_ddb_allocation { |
| struct skl_ddb_entry pipe[I915_MAX_PIPES]; |
| struct skl_ddb_entry plane[I915_MAX_PIPES][I915_MAX_PLANES]; /* packed/uv */ |
| struct skl_ddb_entry y_plane[I915_MAX_PIPES][I915_MAX_PLANES]; |
| }; |
| |
| struct skl_wm_values { |
| bool dirty[I915_MAX_PIPES]; |
| struct skl_ddb_allocation ddb; |
| uint32_t wm_linetime[I915_MAX_PIPES]; |
| uint32_t plane[I915_MAX_PIPES][I915_MAX_PLANES][8]; |
| uint32_t plane_trans[I915_MAX_PIPES][I915_MAX_PLANES]; |
| }; |
| |
| struct skl_wm_level { |
| bool plane_en[I915_MAX_PLANES]; |
| uint16_t plane_res_b[I915_MAX_PLANES]; |
| uint8_t plane_res_l[I915_MAX_PLANES]; |
| }; |
| |
| /* |
| * This struct helps tracking the state needed for runtime PM, which puts the |
| * device in PCI D3 state. Notice that when this happens, nothing on the |
| * graphics device works, even register access, so we don't get interrupts nor |
| * anything else. |
| * |
| * Every piece of our code that needs to actually touch the hardware needs to |
| * either call intel_runtime_pm_get or call intel_display_power_get with the |
| * appropriate power domain. |
| * |
| * Our driver uses the autosuspend delay feature, which means we'll only really |
| * suspend if we stay with zero refcount for a certain amount of time. The |
| * default value is currently very conservative (see intel_runtime_pm_enable), but |
| * it can be changed with the standard runtime PM files from sysfs. |
| * |
| * The irqs_disabled variable becomes true exactly after we disable the IRQs and |
| * goes back to false exactly before we reenable the IRQs. We use this variable |
| * to check if someone is trying to enable/disable IRQs while they're supposed |
| * to be disabled. This shouldn't happen and we'll print some error messages in |
| * case it happens. |
| * |
| * For more, read the Documentation/power/runtime_pm.txt. |
| */ |
| struct i915_runtime_pm { |
| bool suspended; |
| bool irqs_enabled; |
| }; |
| |
| enum intel_pipe_crc_source { |
| INTEL_PIPE_CRC_SOURCE_NONE, |
| INTEL_PIPE_CRC_SOURCE_PLANE1, |
| INTEL_PIPE_CRC_SOURCE_PLANE2, |
| INTEL_PIPE_CRC_SOURCE_PF, |
| INTEL_PIPE_CRC_SOURCE_PIPE, |
| /* TV/DP on pre-gen5/vlv can't use the pipe source. */ |
| INTEL_PIPE_CRC_SOURCE_TV, |
| INTEL_PIPE_CRC_SOURCE_DP_B, |
| INTEL_PIPE_CRC_SOURCE_DP_C, |
| INTEL_PIPE_CRC_SOURCE_DP_D, |
| INTEL_PIPE_CRC_SOURCE_AUTO, |
| INTEL_PIPE_CRC_SOURCE_MAX, |
| }; |
| |
| struct intel_pipe_crc_entry { |
| uint32_t frame; |
| uint32_t crc[5]; |
| }; |
| |
| #define INTEL_PIPE_CRC_ENTRIES_NR 128 |
| struct intel_pipe_crc { |
| spinlock_t lock; |
| bool opened; /* exclusive access to the result file */ |
| struct intel_pipe_crc_entry *entries; |
| enum intel_pipe_crc_source source; |
| int head, tail; |
| wait_queue_head_t wq; |
| }; |
| |
| struct i915_frontbuffer_tracking { |
| struct mutex lock; |
| |
| /* |
| * Tracking bits for delayed frontbuffer flushing du to gpu activity or |
| * scheduled flips. |
| */ |
| unsigned busy_bits; |
| unsigned flip_bits; |
| }; |
| |
| struct i915_wa_reg { |
| u32 addr; |
| u32 value; |
| /* bitmask representing WA bits */ |
| u32 mask; |
| }; |
| |
| #define I915_MAX_WA_REGS 16 |
| |
| struct i915_workarounds { |
| struct i915_wa_reg reg[I915_MAX_WA_REGS]; |
| u32 count; |
| }; |
| |
| struct i915_virtual_gpu { |
| bool active; |
| }; |
| |
| struct i915_execbuffer_params { |
| struct drm_device *dev; |
| struct drm_file *file; |
| uint32_t dispatch_flags; |
| uint32_t args_batch_start_offset; |
| uint64_t batch_obj_vm_offset; |
| struct intel_engine_cs *ring; |
| struct drm_i915_gem_object *batch_obj; |
| struct intel_context *ctx; |
| struct drm_i915_gem_request *request; |
| }; |
| |
| struct drm_i915_private { |
| struct drm_device *dev; |
| struct kmem_cache *objects; |
| struct kmem_cache *vmas; |
| struct kmem_cache *requests; |
| |
| const struct intel_device_info info; |
| |
| int relative_constants_mode; |
| |
| void __iomem *regs; |
| |
| struct intel_uncore uncore; |
| |
| struct i915_virtual_gpu vgpu; |
| |
| struct intel_guc guc; |
| |
| struct intel_csr csr; |
| |
| /* Display CSR-related protection */ |
| struct mutex csr_lock; |
| |
| struct intel_gmbus gmbus[GMBUS_NUM_PINS]; |
| |
| /** gmbus_mutex protects against concurrent usage of the single hw gmbus |
| * controller on different i2c buses. */ |
| struct mutex gmbus_mutex; |
| |
| /** |
| * Base address of the gmbus and gpio block. |
| */ |
| uint32_t gpio_mmio_base; |
| |
| /* MMIO base address for MIPI regs */ |
| uint32_t mipi_mmio_base; |
| |
| wait_queue_head_t gmbus_wait_queue; |
| |
| struct pci_dev *bridge_dev; |
| struct intel_engine_cs ring[I915_NUM_RINGS]; |
| struct drm_i915_gem_object *semaphore_obj; |
| uint32_t last_seqno, next_seqno; |
| |
| struct drm_dma_handle *status_page_dmah; |
| struct resource mch_res; |
| |
| /* protects the irq masks */ |
| spinlock_t irq_lock; |
| |
| /* protects the mmio flip data */ |
| spinlock_t mmio_flip_lock; |
| |
| bool display_irqs_enabled; |
| |
| /* To control wakeup latency, e.g. for irq-driven dp aux transfers. */ |
| struct pm_qos_request pm_qos; |
| |
| /* Sideband mailbox protection */ |
| struct mutex sb_lock; |
| |
| /** Cached value of IMR to avoid reads in updating the bitfield */ |
| union { |
| u32 irq_mask; |
| u32 de_irq_mask[I915_MAX_PIPES]; |
| }; |
| u32 gt_irq_mask; |
| u32 pm_irq_mask; |
| u32 pm_rps_events; |
| u32 pipestat_irq_mask[I915_MAX_PIPES]; |
| |
| struct i915_hotplug hotplug; |
| struct i915_fbc fbc; |
| struct i915_drrs drrs; |
| struct intel_opregion opregion; |
| struct intel_vbt_data vbt; |
| |
| bool preserve_bios_swizzle; |
| |
| /* overlay */ |
| struct intel_overlay *overlay; |
| |
| /* backlight registers and fields in struct intel_panel */ |
| struct mutex backlight_lock; |
| |
| /* LVDS info */ |
| bool no_aux_handshake; |
| |
| /* protects panel power sequencer state */ |
| struct mutex pps_mutex; |
| |
| struct drm_i915_fence_reg fence_regs[I915_MAX_NUM_FENCES]; /* assume 965 */ |
| int num_fence_regs; /* 8 on pre-965, 16 otherwise */ |
| |
| unsigned int fsb_freq, mem_freq, is_ddr3; |
| unsigned int skl_boot_cdclk; |
| unsigned int cdclk_freq, max_cdclk_freq; |
| unsigned int max_dotclk_freq; |
| unsigned int hpll_freq; |
| unsigned int czclk_freq; |
| |
| /** |
| * wq - Driver workqueue for GEM. |
| * |
| * NOTE: Work items scheduled here are not allowed to grab any modeset |
| * locks, for otherwise the flushing done in the pageflip code will |
| * result in deadlocks. |
| */ |
| struct workqueue_struct *wq; |
| |
| /* Display functions */ |
| struct drm_i915_display_funcs display; |
| |
| /* PCH chipset type */ |
| enum intel_pch pch_type; |
| unsigned short pch_id; |
| |
| unsigned long quirks; |
| |
| enum modeset_restore modeset_restore; |
| struct mutex modeset_restore_lock; |
| |
| struct list_head vm_list; /* Global list of all address spaces */ |
| struct i915_gtt gtt; /* VM representing the global address space */ |
| |
| struct i915_gem_mm mm; |
| DECLARE_HASHTABLE(mm_structs, 7); |
| struct mutex mm_lock; |
| |
| /* Kernel Modesetting */ |
| |
| struct sdvo_device_mapping sdvo_mappings[2]; |
| |
| struct drm_crtc *plane_to_crtc_mapping[I915_MAX_PIPES]; |
| struct drm_crtc *pipe_to_crtc_mapping[I915_MAX_PIPES]; |
| wait_queue_head_t pending_flip_queue; |
| |
| #ifdef CONFIG_DEBUG_FS |
| struct intel_pipe_crc pipe_crc[I915_MAX_PIPES]; |
| #endif |
| |
| int num_shared_dpll; |
| struct intel_shared_dpll shared_dplls[I915_NUM_PLLS]; |
| int dpio_phy_iosf_port[I915_NUM_PHYS_VLV]; |
| |
| struct i915_workarounds workarounds; |
| |
| /* Reclocking support */ |
| bool render_reclock_avail; |
| |
| struct i915_frontbuffer_tracking fb_tracking; |
| |
| u16 orig_clock; |
| |
| bool mchbar_need_disable; |
| |
| struct intel_l3_parity l3_parity; |
| |
| /* Cannot be determined by PCIID. You must always read a register. */ |
| size_t ellc_size; |
| |
| /* gen6+ rps state */ |
| struct intel_gen6_power_mgmt rps; |
| |
| /* ilk-only ips/rps state. Everything in here is protected by the global |
| * mchdev_lock in intel_pm.c */ |
| struct intel_ilk_power_mgmt ips; |
| |
| struct i915_power_domains power_domains; |
| |
| struct i915_psr psr; |
| |
| struct i915_gpu_error gpu_error; |
| |
| struct drm_i915_gem_object *vlv_pctx; |
| |
| #ifdef CONFIG_DRM_FBDEV_EMULATION |
| /* list of fbdev register on this device */ |
| struct intel_fbdev *fbdev; |
| struct work_struct fbdev_suspend_work; |
| #endif |
| |
| struct drm_property *broadcast_rgb_property; |
| struct drm_property *force_audio_property; |
| |
| /* hda/i915 audio component */ |
| struct i915_audio_component *audio_component; |
| bool audio_component_registered; |
| /** |
| * av_mutex - mutex for audio/video sync |
| * |
| */ |
| struct mutex av_mutex; |
| |
| uint32_t hw_context_size; |
| struct list_head context_list; |
| |
| u32 fdi_rx_config; |
| |
| u32 chv_phy_control; |
| |
| u32 suspend_count; |
| struct i915_suspend_saved_registers regfile; |
| struct vlv_s0ix_state vlv_s0ix_state; |
| |
| struct { |
| /* |
| * Raw watermark latency values: |
| * in 0.1us units for WM0, |
| * in 0.5us units for WM1+. |
| */ |
| /* primary */ |
| uint16_t pri_latency[5]; |
| /* sprite */ |
| uint16_t spr_latency[5]; |
| /* cursor */ |
| uint16_t cur_latency[5]; |
| /* |
| * Raw watermark memory latency values |
| * for SKL for all 8 levels |
| * in 1us units. |
| */ |
| uint16_t skl_latency[8]; |
| |
| /* |
| * The skl_wm_values structure is a bit too big for stack |
| * allocation, so we keep the staging struct where we store |
| * intermediate results here instead. |
| */ |
| struct skl_wm_values skl_results; |
| |
| /* current hardware state */ |
| union { |
| struct ilk_wm_values hw; |
| struct skl_wm_values skl_hw; |
| struct vlv_wm_values vlv; |
| }; |
| |
| uint8_t max_level; |
| } wm; |
| |
| struct i915_runtime_pm pm; |
| |
| /* Abstract the submission mechanism (legacy ringbuffer or execlists) away */ |
| struct { |
| int (*execbuf_submit)(struct i915_execbuffer_params *params, |
| struct drm_i915_gem_execbuffer2 *args, |
| struct list_head *vmas); |
| int (*init_rings)(struct drm_device *dev); |
| void (*cleanup_ring)(struct intel_engine_cs *ring); |
| void (*stop_ring)(struct intel_engine_cs *ring); |
| } gt; |
| |
| bool edp_low_vswing; |
| |
| /* perform PHY state sanity checks? */ |
| bool chv_phy_assert[2]; |
| |
| /* |
| * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch |
| * will be rejected. Instead look for a better place. |
| */ |
| }; |
| |
| static inline struct drm_i915_private *to_i915(const struct drm_device *dev) |
| { |
| return dev->dev_private; |
| } |
| |
| static inline struct drm_i915_private *dev_to_i915(struct device *dev) |
| { |
| return to_i915(dev_get_drvdata(dev)); |
| } |
| |
| static inline struct drm_i915_private *guc_to_i915(struct intel_guc *guc) |
| { |
| return container_of(guc, struct drm_i915_private, guc); |
| } |
| |
| /* Iterate over initialised rings */ |
| #define for_each_ring(ring__, dev_priv__, i__) \ |
| for ((i__) = 0; (i__) < I915_NUM_RINGS; (i__)++) \ |
| if (((ring__) = &(dev_priv__)->ring[(i__)]), intel_ring_initialized((ring__))) |
| |
| enum hdmi_force_audio { |
| HDMI_AUDIO_OFF_DVI = -2, /* no aux data for HDMI-DVI converter */ |
| HDMI_AUDIO_OFF, /* force turn off HDMI audio */ |
| HDMI_AUDIO_AUTO, /* trust EDID */ |
| HDMI_AUDIO_ON, /* force turn on HDMI audio */ |
| }; |
| |
| #define I915_GTT_OFFSET_NONE ((u32)-1) |
| |
| struct drm_i915_gem_object_ops { |
| /* Interface between the GEM object and its backing storage. |
| * get_pages() is called once prior to the use of the associated set |
| * of pages before to binding them into the GTT, and put_pages() is |
| * called after we no longer need them. As we expect there to be |
| * associated cost with migrating pages between the backing storage |
| * and making them available for the GPU (e.g. clflush), we may hold |
| * onto the pages after they are no longer referenced by the GPU |
| * in case they may be used again shortly (for example migrating the |
| * pages to a different memory domain within the GTT). put_pages() |
| * will therefore most likely be called when the object itself is |
| * being released or under memory pressure (where we attempt to |
| * reap pages for the shrinker). |
| */ |
| int (*get_pages)(struct drm_i915_gem_object *); |
| void (*put_pages)(struct drm_i915_gem_object *); |
| int (*dmabuf_export)(struct drm_i915_gem_object *); |
| void (*release)(struct drm_i915_gem_object *); |
| }; |
| |
| /* |
| * Frontbuffer tracking bits. Set in obj->frontbuffer_bits while a gem bo is |
| * considered to be the frontbuffer for the given plane interface-wise. This |
| * doesn't mean that the hw necessarily already scans it out, but that any |
| * rendering (by the cpu or gpu) will land in the frontbuffer eventually. |
| * |
| * We have one bit per pipe and per scanout plane type. |
| */ |
| #define INTEL_MAX_SPRITE_BITS_PER_PIPE 5 |
| #define INTEL_FRONTBUFFER_BITS_PER_PIPE 8 |
| #define INTEL_FRONTBUFFER_BITS \ |
| (INTEL_FRONTBUFFER_BITS_PER_PIPE * I915_MAX_PIPES) |
| #define INTEL_FRONTBUFFER_PRIMARY(pipe) \ |
| (1 << (INTEL_FRONTBUFFER_BITS_PER_PIPE * (pipe))) |
| #define INTEL_FRONTBUFFER_CURSOR(pipe) \ |
| (1 << (1 + (INTEL_FRONTBUFFER_BITS_PER_PIPE * (pipe)))) |
| #define INTEL_FRONTBUFFER_SPRITE(pipe, plane) \ |
| (1 << (2 + plane + (INTEL_FRONTBUFFER_BITS_PER_PIPE * (pipe)))) |
| #define INTEL_FRONTBUFFER_OVERLAY(pipe) \ |
| (1 << (2 + INTEL_MAX_SPRITE_BITS_PER_PIPE + (INTEL_FRONTBUFFER_BITS_PER_PIPE * (pipe)))) |
| #define INTEL_FRONTBUFFER_ALL_MASK(pipe) \ |
| (0xff << (INTEL_FRONTBUFFER_BITS_PER_PIPE * (pipe))) |
| |
| struct drm_i915_gem_object { |
| struct drm_gem_object base; |
| |
| const struct drm_i915_gem_object_ops *ops; |
| |
| /** List of VMAs backed by this object */ |
| struct list_head vma_list; |
| |
| /** Stolen memory for this object, instead of being backed by shmem. */ |
| struct drm_mm_node *stolen; |
| struct list_head global_list; |
| |
| struct list_head ring_list[I915_NUM_RINGS]; |
| /** Used in execbuf to temporarily hold a ref */ |
| struct list_head obj_exec_link; |
| |
| struct list_head batch_pool_link; |
| |
| /** |
| * This is set if the object is on the active lists (has pending |
| * rendering and so a non-zero seqno), and is not set if it i s on |
| * inactive (ready to be unbound) list. |
| */ |
| unsigned int active:I915_NUM_RINGS; |
| |
| /** |
| * This is set if the object has been written to since last bound |
| * to the GTT |
| */ |
| unsigned int dirty:1; |
| |
| /** |
| * Fence register bits (if any) for this object. Will be set |
| * as needed when mapped into the GTT. |
| * Protected by dev->struct_mutex. |
| */ |
| signed int fence_reg:I915_MAX_NUM_FENCE_BITS; |
| |
| /** |
| * Advice: are the backing pages purgeable? |
| */ |
| unsigned int madv:2; |
| |
| /** |
| * Current tiling mode for the object. |
| */ |
| unsigned int tiling_mode:2; |
| /** |
| * Whether the tiling parameters for the currently associated fence |
| * register have changed. Note that for the purposes of tracking |
| * tiling changes we also treat the unfenced register, the register |
| * slot that the object occupies whilst it executes a fenced |
| * command (such as BLT on gen2/3), as a "fence". |
| */ |
| unsigned int fence_dirty:1; |
| |
| /** |
| * Is the object at the current location in the gtt mappable and |
| * fenceable? Used to avoid costly recalculations. |
| */ |
| unsigned int map_and_fenceable:1; |
| |
| /** |
| * Whether the current gtt mapping needs to be mappable (and isn't just |
| * mappable by accident). Track pin and fault separate for a more |
| * accurate mappable working set. |
| */ |
| unsigned int fault_mappable:1; |
| |
| /* |
| * Is the object to be mapped as read-only to the GPU |
| * Only honoured if hardware has relevant pte bit |
| */ |
| unsigned long gt_ro:1; |
| unsigned int cache_level:3; |
| unsigned int cache_dirty:1; |
| |
| unsigned int frontbuffer_bits:INTEL_FRONTBUFFER_BITS; |
| |
| unsigned int pin_display; |
| |
| struct sg_table *pages; |
| int pages_pin_count; |
| struct get_page { |
| struct scatterlist *sg; |
| int last; |
| } get_page; |
| |
| /* prime dma-buf support */ |
| void *dma_buf_vmapping; |
| int vmapping_count; |
| |
| /** Breadcrumb of last rendering to the buffer. |
| * There can only be one writer, but we allow for multiple readers. |
| * If there is a writer that necessarily implies that all other |
| * read requests are complete - but we may only be lazily clearing |
| * the read requests. A read request is naturally the most recent |
| * request on a ring, so we may have two different write and read |
| * requests on one ring where the write request is older than the |
| * read request. This allows for the CPU to read from an active |
| * buffer by only waiting for the write to complete. |
| * */ |
| struct drm_i915_gem_request *last_read_req[I915_NUM_RINGS]; |
| struct drm_i915_gem_request *last_write_req; |
| /** Breadcrumb of last fenced GPU access to the buffer. */ |
| struct drm_i915_gem_request *last_fenced_req; |
| |
| /** Current tiling stride for the object, if it's tiled. */ |
| uint32_t stride; |
| |
| /** References from framebuffers, locks out tiling changes. */ |
| unsigned long framebuffer_references; |
| |
| /** Record of address bit 17 of each page at last unbind. */ |
| unsigned long *bit_17; |
| |
| union { |
| /** for phy allocated objects */ |
| struct drm_dma_handle *phys_handle; |
| |
| struct i915_gem_userptr { |
| uintptr_t ptr; |
| unsigned read_only :1; |
| unsigned workers :4; |
| #define I915_GEM_USERPTR_MAX_WORKERS 15 |
| |
| struct i915_mm_struct *mm; |
| struct i915_mmu_object *mmu_object; |
| struct work_struct *work; |
| } userptr; |
| }; |
| }; |
| #define to_intel_bo(x) container_of(x, struct drm_i915_gem_object, base) |
| |
| void i915_gem_track_fb(struct drm_i915_gem_object *old, |
| struct drm_i915_gem_object *new, |
| unsigned frontbuffer_bits); |
| |
| /** |
| * Request queue structure. |
| * |
| * The request queue allows us to note sequence numbers that have been emitted |
| * and may be associated with active buffers to be retired. |
| * |
| * By keeping this list, we can avoid having to do questionable sequence |
| * number comparisons on buffer last_read|write_seqno. It also allows an |
| * emission time to be associated with the request for tracking how far ahead |
| * of the GPU the submission is. |
| * |
| * The requests are reference counted, so upon creation they should have an |
| * initial reference taken using kref_init |
| */ |
| struct drm_i915_gem_request { |
| struct kref ref; |
| |
| /** On Which ring this request was generated */ |
| struct drm_i915_private *i915; |
| struct intel_engine_cs *ring; |
| |
| /** GEM sequence number associated with this request. */ |
| uint32_t seqno; |
| |
| /** Position in the ringbuffer of the start of the request */ |
| u32 head; |
| |
| /** |
| * Position in the ringbuffer of the start of the postfix. |
| * This is required to calculate the maximum available ringbuffer |
| * space without overwriting the postfix. |
| */ |
| u32 postfix; |
| |
| /** Position in the ringbuffer of the end of the whole request */ |
| u32 tail; |
| |
| /** |
| * Context and ring buffer related to this request |
| * Contexts are refcounted, so when this request is associated with a |
| * context, we must increment the context's refcount, to guarantee that |
| * it persists while any request is linked to it. Requests themselves |
| * are also refcounted, so the request will only be freed when the last |
| * reference to it is dismissed, and the code in |
| * i915_gem_request_free() will then decrement the refcount on the |
| * context. |
| */ |
| struct intel_context *ctx; |
| struct intel_ringbuffer *ringbuf; |
| |
| /** Batch buffer related to this request if any (used for |
| error state dump only) */ |
| struct drm_i915_gem_object *batch_obj; |
| |
| /** Time at which this request was emitted, in jiffies. */ |
| unsigned long emitted_jiffies; |
| |
| /** global list entry for this request */ |
| struct list_head list; |
| |
| struct drm_i915_file_private *file_priv; |
| /** file_priv list entry for this request */ |
| struct list_head client_list; |
| |
| /** process identifier submitting this request */ |
| struct pid *pid; |
| |
| /** |
| * The ELSP only accepts two elements at a time, so we queue |
| * context/tail pairs on a given queue (ring->execlist_queue) until the |
| * hardware is available. The queue serves a double purpose: we also use |
| * it to keep track of the up to 2 contexts currently in the hardware |
| * (usually one in execution and the other queued up by the GPU): We |
| * only remove elements from the head of the queue when the hardware |
| * informs us that an element has been completed. |
| * |
| * All accesses to the queue are mediated by a spinlock |
| * (ring->execlist_lock). |
| */ |
| |
| /** Execlist link in the submission queue.*/ |
| struct list_head execlist_link; |
| |
| /** Execlists no. of times this request has been sent to the ELSP */ |
| int elsp_submitted; |
| |
| }; |
| |
| int i915_gem_request_alloc(struct intel_engine_cs *ring, |
| struct intel_context *ctx, |
| struct drm_i915_gem_request **req_out); |
| void i915_gem_request_cancel(struct drm_i915_gem_request *req); |
| void i915_gem_request_free(struct kref *req_ref); |
| int i915_gem_request_add_to_client(struct drm_i915_gem_request *req, |
| struct drm_file *file); |
| |
| static inline uint32_t |
| i915_gem_request_get_seqno(struct drm_i915_gem_request *req) |
| { |
| return req ? req->seqno : 0; |
| } |
| |
| static inline struct intel_engine_cs * |
| i915_gem_request_get_ring(struct drm_i915_gem_request *req) |
| { |
| return req ? req->ring : NULL; |
| } |
| |
| static inline struct drm_i915_gem_request * |
| i915_gem_request_reference(struct drm_i915_gem_request *req) |
| { |
| if (req) |
| kref_get(&req->ref); |
| return req; |
| } |
| |
| static inline void |
| i915_gem_request_unreference(struct drm_i915_gem_request *req) |
| { |
| WARN_ON(!mutex_is_locked(&req->ring->dev->struct_mutex)); |
| kref_put(&req->ref, i915_gem_request_free); |
| } |
| |
| static inline void |
| i915_gem_request_unreference__unlocked(struct drm_i915_gem_request *req) |
| { |
| struct drm_device *dev; |
| |
| if (!req) |
| return; |
| |
| dev = req->ring->dev; |
| if (kref_put_mutex(&req->ref, i915_gem_request_free, &dev->struct_mutex)) |
| mutex_unlock(&dev->struct_mutex); |
| } |
| |
| static inline void i915_gem_request_assign(struct drm_i915_gem_request **pdst, |
| struct drm_i915_gem_request *src) |
| { |
| if (src) |
| i915_gem_request_reference(src); |
| |
| if (*pdst) |
| i915_gem_request_unreference(*pdst); |
| |
| *pdst = src; |
| } |
| |
| /* |
| * XXX: i915_gem_request_completed should be here but currently needs the |
| * definition of i915_seqno_passed() which is below. It will be moved in |
| * a later patch when the call to i915_seqno_passed() is obsoleted... |
| */ |
| |
| /* |
| * A command that requires special handling by the command parser. |
| */ |
| struct drm_i915_cmd_descriptor { |
| /* |
| * Flags describing how the command parser processes the command. |
| * |
| * CMD_DESC_FIXED: The command has a fixed length if this is set, |
| * a length mask if not set |
| * CMD_DESC_SKIP: The command is allowed but does not follow the |
| * standard length encoding for the opcode range in |
| * which it falls |
| * CMD_DESC_REJECT: The command is never allowed |
| * CMD_DESC_REGISTER: The command should be checked against the |
| * register whitelist for the appropriate ring |
| * CMD_DESC_MASTER: The command is allowed if the submitting process |
| * is the DRM master |
| */ |
| u32 flags; |
| #define CMD_DESC_FIXED (1<<0) |
| #define CMD_DESC_SKIP (1<<1) |
| #define CMD_DESC_REJECT (1<<2) |
| #define CMD_DESC_REGISTER (1<<3) |
| #define CMD_DESC_BITMASK (1<<4) |
| #define CMD_DESC_MASTER (1<<5) |
| |
| /* |
| * The command's unique identification bits and the bitmask to get them. |
| * This isn't strictly the opcode field as defined in the spec and may |
| * also include type, subtype, and/or subop fields. |
| */ |
| struct { |
| u32 value; |
| u32 mask; |
| } cmd; |
| |
| /* |
| * The command's length. The command is either fixed length (i.e. does |
| * not include a length field) or has a length field mask. The flag |
| * CMD_DESC_FIXED indicates a fixed length. Otherwise, the command has |
| * a length mask. All command entries in a command table must include |
| * length information. |
| */ |
| union { |
| u32 fixed; |
| u32 mask; |
| } length; |
| |
| /* |
| * Describes where to find a register address in the command to check |
| * against the ring's register whitelist. Only valid if flags has the |
| * CMD_DESC_REGISTER bit set. |
| * |
| * A non-zero step value implies that the command may access multiple |
| * registers in sequence (e.g. LRI), in that case step gives the |
| * distance in dwords between individual offset fields. |
| */ |
| struct { |
| u32 offset; |
| u32 mask; |
| u32 step; |
| } reg; |
| |
| #define MAX_CMD_DESC_BITMASKS 3 |
| /* |
| * Describes command checks where a particular dword is masked and |
| * compared against an expected value. If the command does not match |
| * the expected value, the parser rejects it. Only valid if flags has |
| * the CMD_DESC_BITMASK bit set. Only entries where mask is non-zero |
| * are valid. |
| * |
| * If the check specifies a non-zero condition_mask then the parser |
| * only performs the check when the bits specified by condition_mask |
| * are non-zero. |
| */ |
| struct { |
| u32 offset; |
| u32 mask; |
| u32 expected; |
| u32 condition_offset; |
| u32 condition_mask; |
| } bits[MAX_CMD_DESC_BITMASKS]; |
| }; |
| |
| /* |
| * A table of commands requiring special handling by the command parser. |
| * |
| * Each ring has an array of tables. Each table consists of an array of command |
| * descriptors, which must be sorted with command opcodes in ascending order. |
| */ |
| struct drm_i915_cmd_table { |
| const struct drm_i915_cmd_descriptor *table; |
| int count; |
| }; |
| |
| /* Note that the (struct drm_i915_private *) cast is just to shut up gcc. */ |
| #define __I915__(p) ({ \ |
| struct drm_i915_private *__p; \ |
| if (__builtin_types_compatible_p(typeof(*p), struct drm_i915_private)) \ |
| __p = (struct drm_i915_private *)p; \ |
| else if (__builtin_types_compatible_p(typeof(*p), struct drm_device)) \ |
| __p = to_i915((struct drm_device *)p); \ |
| else \ |
| BUILD_BUG(); \ |
| __p; \ |
| }) |
| #define INTEL_INFO(p) (&__I915__(p)->info) |
| #define INTEL_DEVID(p) (INTEL_INFO(p)->device_id) |
| #define INTEL_REVID(p) (__I915__(p)->dev->pdev->revision) |
| |
| #define IS_I830(dev) (INTEL_DEVID(dev) == 0x3577) |
| #define IS_845G(dev) (INTEL_DEVID(dev) == 0x2562) |
| #define IS_I85X(dev) (INTEL_INFO(dev)->is_i85x) |
| #define IS_I865G(dev) (INTEL_DEVID(dev) == 0x2572) |
| #define IS_I915G(dev) (INTEL_INFO(dev)->is_i915g) |
| #define IS_I915GM(dev) (INTEL_DEVID(dev) == 0x2592) |
| #define IS_I945G(dev) (INTEL_DEVID(dev) == 0x2772) |
| #define IS_I945GM(dev) (INTEL_INFO(dev)->is_i945gm) |
| #define IS_BROADWATER(dev) (INTEL_INFO(dev)->is_broadwater) |
| #define IS_CRESTLINE(dev) (INTEL_INFO(dev)->is_crestline) |
| #define IS_GM45(dev) (INTEL_DEVID(dev) == 0x2A42) |
| #define IS_G4X(dev) (INTEL_INFO(dev)->is_g4x) |
| #define IS_PINEVIEW_G(dev) (INTEL_DEVID(dev) == 0xa001) |
| #define IS_PINEVIEW_M(dev) (INTEL_DEVID(dev) == 0xa011) |
| #define IS_PINEVIEW(dev) (INTEL_INFO(dev)->is_pineview) |
| #define IS_G33(dev) (INTEL_INFO(dev)->is_g33) |
| #define IS_IRONLAKE_M(dev) (INTEL_DEVID(dev) == 0x0046) |
| #define IS_IVYBRIDGE(dev) (INTEL_INFO(dev)->is_ivybridge) |
| #define IS_IVB_GT1(dev) (INTEL_DEVID(dev) == 0x0156 || \ |
| INTEL_DEVID(dev) == 0x0152 || \ |
| INTEL_DEVID(dev) == 0x015a) |
| #define IS_VALLEYVIEW(dev) (INTEL_INFO(dev)->is_valleyview) |
| #define IS_CHERRYVIEW(dev) (INTEL_INFO(dev)->is_valleyview && IS_GEN8(dev)) |
| #define IS_HASWELL(dev) (INTEL_INFO(dev)->is_haswell) |
| #define IS_BROADWELL(dev) (!INTEL_INFO(dev)->is_valleyview && IS_GEN8(dev)) |
| #define IS_SKYLAKE(dev) (INTEL_INFO(dev)->is_skylake) |
| #define IS_BROXTON(dev) (!INTEL_INFO(dev)->is_skylake && IS_GEN9(dev)) |
| #define IS_MOBILE(dev) (INTEL_INFO(dev)->is_mobile) |
| #define IS_HSW_EARLY_SDV(dev) (IS_HASWELL(dev) && \ |
| (INTEL_DEVID(dev) & 0xFF00) == 0x0C00) |
| #define IS_BDW_ULT(dev) (IS_BROADWELL(dev) && \ |
| ((INTEL_DEVID(dev) & 0xf) == 0x6 || \ |
| (INTEL_DEVID(dev) & 0xf) == 0xb || \ |
| (INTEL_DEVID(dev) & 0xf) == 0xe)) |
| /* ULX machines are also considered ULT. */ |
| #define IS_BDW_ULX(dev) (IS_BROADWELL(dev) && \ |
| (INTEL_DEVID(dev) & 0xf) == 0xe) |
| #define IS_BDW_GT3(dev) (IS_BROADWELL(dev) && \ |
| (INTEL_DEVID(dev) & 0x00F0) == 0x0020) |
| #define IS_HSW_ULT(dev) (IS_HASWELL(dev) && \ |
| (INTEL_DEVID(dev) & 0xFF00) == 0x0A00) |
| #define IS_HSW_GT3(dev) (IS_HASWELL(dev) && \ |
| (INTEL_DEVID(dev) & 0x00F0) == 0x0020) |
| /* ULX machines are also considered ULT. */ |
| #define IS_HSW_ULX(dev) (INTEL_DEVID(dev) == 0x0A0E || \ |
| INTEL_DEVID(dev) == 0x0A1E) |
| #define IS_SKL_ULT(dev) (INTEL_DEVID(dev) == 0x1906 || \ |
| INTEL_DEVID(dev) == 0x1913 || \ |
| INTEL_DEVID(dev) == 0x1916 || \ |
| INTEL_DEVID(dev) == 0x1921 || \ |
| INTEL_DEVID(dev) == 0x1926) |
| #define IS_SKL_ULX(dev) (INTEL_DEVID(dev) == 0x190E || \ |
| INTEL_DEVID(dev) == 0x1915 || \ |
| INTEL_DEVID(dev) == 0x191E) |
| #define IS_SKL_GT3(dev) (IS_SKYLAKE(dev) && \ |
| (INTEL_DEVID(dev) & 0x00F0) == 0x0020) |
| #define IS_SKL_GT4(dev) (IS_SKYLAKE(dev) && \ |
| (INTEL_DEVID(dev) & 0x00F0) == 0x0030) |
| |
| #define IS_PRELIMINARY_HW(intel_info) ((intel_info)->is_preliminary) |
| |
| #define SKL_REVID_A0 (0x0) |
| #define SKL_REVID_B0 (0x1) |
| #define SKL_REVID_C0 (0x2) |
| #define SKL_REVID_D0 (0x3) |
| #define SKL_REVID_E0 (0x4) |
| #define SKL_REVID_F0 (0x5) |
| |
| #define BXT_REVID_A0 (0x0) |
| #define BXT_REVID_B0 (0x3) |
| #define BXT_REVID_C0 (0x9) |
| |
| /* |
| * The genX designation typically refers to the render engine, so render |
| * capability related checks should use IS_GEN, while display and other checks |
| * have their own (e.g. HAS_PCH_SPLIT for ILK+ display, IS_foo for particular |
| * chips, etc.). |
| */ |
| #define IS_GEN2(dev) (INTEL_INFO(dev)->gen == 2) |
| #define IS_GEN3(dev) (INTEL_INFO(dev)->gen == 3) |
| #define IS_GEN4(dev) (INTEL_INFO(dev)->gen == 4) |
| #define IS_GEN5(dev) (INTEL_INFO(dev)->gen == 5) |
| #define IS_GEN6(dev) (INTEL_INFO(dev)->gen == 6) |
| #define IS_GEN7(dev) (INTEL_INFO(dev)->gen == 7) |
| #define IS_GEN8(dev) (INTEL_INFO(dev)->gen == 8) |
| #define IS_GEN9(dev) (INTEL_INFO(dev)->gen == 9) |
| |
| #define RENDER_RING (1<<RCS) |
| #define BSD_RING (1<<VCS) |
| #define BLT_RING (1<<BCS) |
| #define VEBOX_RING (1<<VECS) |
| #define BSD2_RING (1<<VCS2) |
| #define HAS_BSD(dev) (INTEL_INFO(dev)->ring_mask & BSD_RING) |
| #define HAS_BSD2(dev) (INTEL_INFO(dev)->ring_mask & BSD2_RING) |
| #define HAS_BLT(dev) (INTEL_INFO(dev)->ring_mask & BLT_RING) |
| #define HAS_VEBOX(dev) (INTEL_INFO(dev)->ring_mask & VEBOX_RING) |
| #define HAS_LLC(dev) (INTEL_INFO(dev)->has_llc) |
| #define HAS_WT(dev) ((IS_HASWELL(dev) || IS_BROADWELL(dev)) && \ |
| __I915__(dev)->ellc_size) |
| #define I915_NEED_GFX_HWS(dev) (INTEL_INFO(dev)->need_gfx_hws) |
| |
| #define HAS_HW_CONTEXTS(dev) (INTEL_INFO(dev)->gen >= 6) |
| #define HAS_LOGICAL_RING_CONTEXTS(dev) (INTEL_INFO(dev)->gen >= 8) |
| #define USES_PPGTT(dev) (i915.enable_ppgtt) |
| #define USES_FULL_PPGTT(dev) (i915.enable_ppgtt >= 2) |
| #define USES_FULL_48BIT_PPGTT(dev) (i915.enable_ppgtt == 3) |
| |
| #define HAS_OVERLAY(dev) (INTEL_INFO(dev)->has_overlay) |
| #define OVERLAY_NEEDS_PHYSICAL(dev) (INTEL_INFO(dev)->overlay_needs_physical) |
| |
| /* Early gen2 have a totally busted CS tlb and require pinned batches. */ |
| #define HAS_BROKEN_CS_TLB(dev) (IS_I830(dev) || IS_845G(dev)) |
| /* |
| * dp aux and gmbus irq on gen4 seems to be able to generate legacy interrupts |
| * even when in MSI mode. This results in spurious interrupt warnings if the |
| * legacy irq no. is shared with another device. The kernel then disables that |
| * interrupt source and so prevents the other device from working properly. |
| */ |
| #define HAS_AUX_IRQ(dev) (INTEL_INFO(dev)->gen >= 5) |
| #define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 5) |
| |
| /* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte |
| * rows, which changed the alignment requirements and fence programming. |
| */ |
| #define HAS_128_BYTE_Y_TILING(dev) (!IS_GEN2(dev) && !(IS_I915G(dev) || \ |
| IS_I915GM(dev))) |
| #define SUPPORTS_TV(dev) (INTEL_INFO(dev)->supports_tv) |
| #define I915_HAS_HOTPLUG(dev) (INTEL_INFO(dev)->has_hotplug) |
| |
| #define HAS_FW_BLC(dev) (INTEL_INFO(dev)->gen > 2) |
| #define HAS_PIPE_CXSR(dev) (INTEL_INFO(dev)->has_pipe_cxsr) |
| #define HAS_FBC(dev) (INTEL_INFO(dev)->has_fbc) |
| |
| #define HAS_IPS(dev) (IS_HSW_ULT(dev) || IS_BROADWELL(dev)) |
| |
| #define HAS_DP_MST(dev) (IS_HASWELL(dev) || IS_BROADWELL(dev) || \ |
| INTEL_INFO(dev)->gen >= 9) |
| |
| #define HAS_DDI(dev) (INTEL_INFO(dev)->has_ddi) |
| #define HAS_FPGA_DBG_UNCLAIMED(dev) (INTEL_INFO(dev)->has_fpga_dbg) |
| #define HAS_PSR(dev) (IS_HASWELL(dev) || IS_BROADWELL(dev) || \ |
| IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev) || \ |
| IS_SKYLAKE(dev)) |
| #define HAS_RUNTIME_PM(dev) (IS_GEN6(dev) || IS_HASWELL(dev) || \ |
| IS_BROADWELL(dev) || IS_VALLEYVIEW(dev) || \ |
| IS_SKYLAKE(dev)) |
| #define HAS_RC6(dev) (INTEL_INFO(dev)->gen >= 6) |
| #define HAS_RC6p(dev) (INTEL_INFO(dev)->gen == 6 || IS_IVYBRIDGE(dev)) |
| |
| #define HAS_CSR(dev) (IS_GEN9(dev)) |
| |
| #define HAS_GUC_UCODE(dev) (IS_GEN9(dev)) |
| #define HAS_GUC_SCHED(dev) (IS_GEN9(dev)) |
| |
| #define HAS_RESOURCE_STREAMER(dev) (IS_HASWELL(dev) || \ |
| INTEL_INFO(dev)->gen >= 8) |
| |
| #define HAS_CORE_RING_FREQ(dev) (INTEL_INFO(dev)->gen >= 6 && \ |
| !IS_VALLEYVIEW(dev) && !IS_BROXTON(dev)) |
| |
| #define INTEL_PCH_DEVICE_ID_MASK 0xff00 |
| #define INTEL_PCH_IBX_DEVICE_ID_TYPE 0x3b00 |
| #define INTEL_PCH_CPT_DEVICE_ID_TYPE 0x1c00 |
| #define INTEL_PCH_PPT_DEVICE_ID_TYPE 0x1e00 |
| #define INTEL_PCH_LPT_DEVICE_ID_TYPE 0x8c00 |
| #define INTEL_PCH_LPT_LP_DEVICE_ID_TYPE 0x9c00 |
| #define INTEL_PCH_SPT_DEVICE_ID_TYPE 0xA100 |
| #define INTEL_PCH_SPT_LP_DEVICE_ID_TYPE 0x9D00 |
| #define INTEL_PCH_P2X_DEVICE_ID_TYPE 0x7100 |
| |
| #define INTEL_PCH_TYPE(dev) (__I915__(dev)->pch_type) |
| #define HAS_PCH_SPT(dev) (INTEL_PCH_TYPE(dev) == PCH_SPT) |
| #define HAS_PCH_LPT(dev) (INTEL_PCH_TYPE(dev) == PCH_LPT) |
| #define HAS_PCH_LPT_LP(dev) (__I915__(dev)->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) |
| #define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT) |
| #define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX) |
| #define HAS_PCH_NOP(dev) (INTEL_PCH_TYPE(dev) == PCH_NOP) |
| #define HAS_PCH_SPLIT(dev) (INTEL_PCH_TYPE(dev) != PCH_NONE) |
| |
| #define HAS_GMCH_DISPLAY(dev) (INTEL_INFO(dev)->gen < 5 || IS_VALLEYVIEW(dev)) |
| |
| /* DPF == dynamic parity feature */ |
| #define HAS_L3_DPF(dev) (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) |
| #define NUM_L3_SLICES(dev) (IS_HSW_GT3(dev) ? 2 : HAS_L3_DPF(dev)) |
| |
| #define GT_FREQUENCY_MULTIPLIER 50 |
| #define GEN9_FREQ_SCALER 3 |
| |
| #include "i915_trace.h" |
| |
| extern const struct drm_ioctl_desc i915_ioctls[]; |
| extern int i915_max_ioctl; |
| |
| extern int i915_suspend_switcheroo(struct drm_device *dev, pm_message_t state); |
| extern int i915_resume_switcheroo(struct drm_device *dev); |
| |
| /* i915_params.c */ |
| struct i915_params { |
| int modeset; |
| int panel_ignore_lid; |
| int semaphores; |
| int lvds_channel_mode; |
| int panel_use_ssc; |
| int vbt_sdvo_panel_type; |
| int enable_rc6; |
| int enable_fbc; |
| int enable_ppgtt; |
| int enable_execlists; |
| int enable_psr; |
| unsigned int preliminary_hw_support; |
| int disable_power_well; |
| int enable_ips; |
| int invert_brightness; |
| int enable_cmd_parser; |
| /* leave bools at the end to not create holes */ |
| bool enable_hangcheck; |
| bool prefault_disable; |
| bool load_detect_test; |
| bool reset; |
| bool disable_display; |
| bool disable_vtd_wa; |
| bool enable_guc_submission; |
| int guc_log_level; |
| int use_mmio_flip; |
| int mmio_debug; |
| bool verbose_state_checks; |
| bool nuclear_pageflip; |
| int edp_vswing; |
| }; |
| extern struct i915_params i915 __read_mostly; |
| |
| /* i915_dma.c */ |
| extern int i915_driver_load(struct drm_device *, unsigned long flags); |
| extern int i915_driver_unload(struct drm_device *); |
| extern int i915_driver_open(struct drm_device *dev, struct drm_file *file); |
| extern void i915_driver_lastclose(struct drm_device * dev); |
| extern void i915_driver_preclose(struct drm_device *dev, |
| struct drm_file *file); |
| extern void i915_driver_postclose(struct drm_device *dev, |
| struct drm_file *file); |
| #ifdef CONFIG_COMPAT |
| extern long i915_compat_ioctl(struct file *filp, unsigned int cmd, |
| unsigned long arg); |
| #endif |
| extern int intel_gpu_reset(struct drm_device *dev); |
| extern bool intel_has_gpu_reset(struct drm_device *dev); |
| extern int i915_reset(struct drm_device *dev); |
| extern unsigned long i915_chipset_val(struct drm_i915_private *dev_priv); |
| extern unsigned long i915_mch_val(struct drm_i915_private *dev_priv); |
| extern unsigned long i915_gfx_val(struct drm_i915_private *dev_priv); |
| extern void i915_update_gfx_val(struct drm_i915_private *dev_priv); |
| int vlv_force_gfx_clock(struct drm_i915_private *dev_priv, bool on); |
| void i915_firmware_load_error_print(const char *fw_path, int err); |
| |
| /* intel_hotplug.c */ |
| void intel_hpd_irq_handler(struct drm_device *dev, u32 pin_mask, u32 long_mask); |
| void intel_hpd_init(struct drm_i915_private *dev_priv); |
| void intel_hpd_init_work(struct drm_i915_private *dev_priv); |
| void intel_hpd_cancel_work(struct drm_i915_private *dev_priv); |
| bool intel_hpd_pin_to_port(enum hpd_pin pin, enum port *port); |
| |
| /* i915_irq.c */ |
| void i915_queue_hangcheck(struct drm_device *dev); |
| __printf(3, 4) |
| void i915_handle_error(struct drm_device *dev, bool wedged, |
| const char *fmt, ...); |
| |
| extern void intel_irq_init(struct drm_i915_private *dev_priv); |
| int intel_irq_install(struct drm_i915_private *dev_priv); |
| void intel_irq_uninstall(struct drm_i915_private *dev_priv); |
| |
| extern void intel_uncore_sanitize(struct drm_device *dev); |
| extern void intel_uncore_early_sanitize(struct drm_device *dev, |
| bool restore_forcewake); |
| extern void intel_uncore_init(struct drm_device *dev); |
| extern void intel_uncore_check_errors(struct drm_device *dev); |
| extern void intel_uncore_fini(struct drm_device *dev); |
| extern void intel_uncore_forcewake_reset(struct drm_device *dev, bool restore); |
| const char *intel_uncore_forcewake_domain_to_str(const enum forcewake_domain_id id); |
| void intel_uncore_forcewake_get(struct drm_i915_private *dev_priv, |
| enum forcewake_domains domains); |
| void intel_uncore_forcewake_put(struct drm_i915_private *dev_priv, |
| enum forcewake_domains domains); |
| /* Like above but the caller must manage the uncore.lock itself. |
| * Must be used with I915_READ_FW and friends. |
| */ |
| void intel_uncore_forcewake_get__locked(struct drm_i915_private *dev_priv, |
| enum forcewake_domains domains); |
| void intel_uncore_forcewake_put__locked(struct drm_i915_private *dev_priv, |
| enum forcewake_domains domains); |
| void assert_forcewakes_inactive(struct drm_i915_private *dev_priv); |
| static inline bool intel_vgpu_active(struct drm_device *dev) |
| { |
| return to_i915(dev)->vgpu.active; |
| } |
| |
| void |
| i915_enable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe, |
| u32 status_mask); |
| |
| void |
| i915_disable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe, |
| u32 status_mask); |
| |
| void valleyview_enable_display_irqs(struct drm_i915_private *dev_priv); |
| void valleyview_disable_display_irqs(struct drm_i915_private *dev_priv); |
| void i915_hotplug_interrupt_update(struct drm_i915_private *dev_priv, |
| uint32_t mask, |
| uint32_t bits); |
| void |
| ironlake_enable_display_irq(struct drm_i915_private *dev_priv, u32 mask); |
| void |
| ironlake_disable_display_irq(struct drm_i915_private *dev_priv, u32 mask); |
| void ibx_display_interrupt_update(struct drm_i915_private *dev_priv, |
| uint32_t interrupt_mask, |
| uint32_t enabled_irq_mask); |
| #define ibx_enable_display_interrupt(dev_priv, bits) \ |
| ibx_display_interrupt_update((dev_priv), (bits), (bits)) |
| #define ibx_disable_display_interrupt(dev_priv, bits) \ |
| ibx_display_interrupt_update((dev_priv), (bits), 0) |
| |
| /* i915_gem.c */ |
| int i915_gem_create_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_pread_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_mmap_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| void i915_gem_execbuffer_move_to_active(struct list_head *vmas, |
| struct drm_i915_gem_request *req); |
| void i915_gem_execbuffer_retire_commands(struct i915_execbuffer_params *params); |
| int i915_gem_ringbuffer_submission(struct i915_execbuffer_params *params, |
| struct drm_i915_gem_execbuffer2 *args, |
| struct list_head *vmas); |
| int i915_gem_execbuffer(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_execbuffer2(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_busy_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_get_caching_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file); |
| int i915_gem_set_caching_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file); |
| int i915_gem_throttle_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_madvise_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_set_tiling(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_get_tiling(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_init_userptr(struct drm_device *dev); |
| int i915_gem_userptr_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file); |
| int i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_wait_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| void i915_gem_load(struct drm_device *dev); |
| void *i915_gem_object_alloc(struct drm_device *dev); |
| void i915_gem_object_free(struct drm_i915_gem_object *obj); |
| void i915_gem_object_init(struct drm_i915_gem_object *obj, |
| const struct drm_i915_gem_object_ops *ops); |
| struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev, |
| size_t size); |
| struct drm_i915_gem_object *i915_gem_object_create_from_data( |
| struct drm_device *dev, const void *data, size_t size); |
| void i915_gem_free_object(struct drm_gem_object *obj); |
| void i915_gem_vma_destroy(struct i915_vma *vma); |
| |
| /* Flags used by pin/bind&friends. */ |
| #define PIN_MAPPABLE (1<<0) |
| #define PIN_NONBLOCK (1<<1) |
| #define PIN_GLOBAL (1<<2) |
| #define PIN_OFFSET_BIAS (1<<3) |
| #define PIN_USER (1<<4) |
| #define PIN_UPDATE (1<<5) |
| #define PIN_ZONE_4G (1<<6) |
| #define PIN_HIGH (1<<7) |
| #define PIN_OFFSET_MASK (~4095) |
| int __must_check |
| i915_gem_object_pin(struct drm_i915_gem_object *obj, |
| struct i915_address_space *vm, |
| uint32_t alignment, |
| uint64_t flags); |
| int __must_check |
| i915_gem_object_ggtt_pin(struct drm_i915_gem_object *obj, |
| const struct i915_ggtt_view *view, |
| uint32_t alignment, |
| uint64_t flags); |
| |
| int i915_vma_bind(struct i915_vma *vma, enum i915_cache_level cache_level, |
| u32 flags); |
| int __must_check i915_vma_unbind(struct i915_vma *vma); |
| /* |
| * BEWARE: Do not use the function below unless you can _absolutely_ |
| * _guarantee_ VMA in question is _not in use_ anywhere. |
| */ |
| int __must_check __i915_vma_unbind_no_wait(struct i915_vma *vma); |
| int i915_gem_object_put_pages(struct drm_i915_gem_object *obj); |
| void i915_gem_release_all_mmaps(struct drm_i915_private *dev_priv); |
| void i915_gem_release_mmap(struct drm_i915_gem_object *obj); |
| |
| int i915_gem_obj_prepare_shmem_read(struct drm_i915_gem_object *obj, |
| int *needs_clflush); |
| |
| int __must_check i915_gem_object_get_pages(struct drm_i915_gem_object *obj); |
| |
| static inline int __sg_page_count(struct scatterlist *sg) |
| { |
| return sg->length >> PAGE_SHIFT; |
| } |
| |
| static inline struct page * |
| i915_gem_object_get_page(struct drm_i915_gem_object *obj, int n) |
| { |
| if (WARN_ON(n >= obj->base.size >> PAGE_SHIFT)) |
| return NULL; |
| |
| if (n < obj->get_page.last) { |
| obj->get_page.sg = obj->pages->sgl; |
| obj->get_page.last = 0; |
| } |
| |
| while (obj->get_page.last + __sg_page_count(obj->get_page.sg) <= n) { |
| obj->get_page.last += __sg_page_count(obj->get_page.sg++); |
| if (unlikely(sg_is_chain(obj->get_page.sg))) |
| obj->get_page.sg = sg_chain_ptr(obj->get_page.sg); |
| } |
| |
| return nth_page(sg_page(obj->get_page.sg), n - obj->get_page.last); |
| } |
| |
| static inline void i915_gem_object_pin_pages(struct drm_i915_gem_object *obj) |
| { |
| BUG_ON(obj->pages == NULL); |
| obj->pages_pin_count++; |
| } |
| static inline void i915_gem_object_unpin_pages(struct drm_i915_gem_object *obj) |
| { |
| BUG_ON(obj->pages_pin_count == 0); |
| obj->pages_pin_count--; |
| } |
| |
| int __must_check i915_mutex_lock_interruptible(struct drm_device *dev); |
| int i915_gem_object_sync(struct drm_i915_gem_object *obj, |
| struct intel_engine_cs *to, |
| struct drm_i915_gem_request **to_req); |
| void i915_vma_move_to_active(struct i915_vma *vma, |
| struct drm_i915_gem_request *req); |
| int i915_gem_dumb_create(struct drm_file *file_priv, |
| struct drm_device *dev, |
| struct drm_mode_create_dumb *args); |
| int i915_gem_mmap_gtt(struct drm_file *file_priv, struct drm_device *dev, |
| uint32_t handle, uint64_t *offset); |
| /** |
| * Returns true if seq1 is later than seq2. |
| */ |
| static inline bool |
| i915_seqno_passed(uint32_t seq1, uint32_t seq2) |
| { |
| return (int32_t)(seq1 - seq2) >= 0; |
| } |
| |
| static inline bool i915_gem_request_completed(struct drm_i915_gem_request *req, |
| bool lazy_coherency) |
| { |
| u32 seqno; |
| |
| BUG_ON(req == NULL); |
| |
| seqno = req->ring->get_seqno(req->ring, lazy_coherency); |
| |
| return i915_seqno_passed(seqno, req->seqno); |
| } |
| |
| int __must_check i915_gem_get_seqno(struct drm_device *dev, u32 *seqno); |
| int __must_check i915_gem_set_seqno(struct drm_device *dev, u32 seqno); |
| |
| struct drm_i915_gem_request * |
| i915_gem_find_active_request(struct intel_engine_cs *ring); |
| |
| bool i915_gem_retire_requests(struct drm_device *dev); |
| void i915_gem_retire_requests_ring(struct intel_engine_cs *ring); |
| int __must_check i915_gem_check_wedge(struct i915_gpu_error *error, |
| bool interruptible); |
| |
| static inline bool i915_reset_in_progress(struct i915_gpu_error *error) |
| { |
| return unlikely(atomic_read(&error->reset_counter) |
| & (I915_RESET_IN_PROGRESS_FLAG | I915_WEDGED)); |
| } |
| |
| static inline bool i915_terminally_wedged(struct i915_gpu_error *error) |
| { |
| return atomic_read(&error->reset_counter) & I915_WEDGED; |
| } |
| |
| static inline u32 i915_reset_count(struct i915_gpu_error *error) |
| { |
| return ((atomic_read(&error->reset_counter) & ~I915_WEDGED) + 1) / 2; |
| } |
| |
| static inline bool i915_stop_ring_allow_ban(struct drm_i915_private *dev_priv) |
| { |
| return dev_priv->gpu_error.stop_rings == 0 || |
| dev_priv->gpu_error.stop_rings & I915_STOP_RING_ALLOW_BAN; |
| } |
| |
| static inline bool i915_stop_ring_allow_warn(struct drm_i915_private *dev_priv) |
| { |
| return dev_priv->gpu_error.stop_rings == 0 || |
| dev_priv->gpu_error.stop_rings & I915_STOP_RING_ALLOW_WARN; |
| } |
| |
| void i915_gem_reset(struct drm_device *dev); |
| bool i915_gem_clflush_object(struct drm_i915_gem_object *obj, bool force); |
| int __must_check i915_gem_init(struct drm_device *dev); |
| int i915_gem_init_rings(struct drm_device *dev); |
| int __must_check i915_gem_init_hw(struct drm_device *dev); |
| int i915_gem_l3_remap(struct drm_i915_gem_request *req, int slice); |
| void i915_gem_init_swizzling(struct drm_device *dev); |
| void i915_gem_cleanup_ringbuffer(struct drm_device *dev); |
| int __must_check i915_gpu_idle(struct drm_device *dev); |
| int __must_check i915_gem_suspend(struct drm_device *dev); |
| void __i915_add_request(struct drm_i915_gem_request *req, |
| struct drm_i915_gem_object *batch_obj, |
| bool flush_caches); |
| #define i915_add_request(req) \ |
| __i915_add_request(req, NULL, true) |
| #define i915_add_request_no_flush(req) \ |
| __i915_add_request(req, NULL, false) |
| int __i915_wait_request(struct drm_i915_gem_request *req, |
| unsigned reset_counter, |
| bool interruptible, |
| s64 *timeout, |
| struct intel_rps_client *rps); |
| int __must_check i915_wait_request(struct drm_i915_gem_request *req); |
| int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf); |
| int __must_check |
| i915_gem_object_wait_rendering(struct drm_i915_gem_object *obj, |
| bool readonly); |
| int __must_check |
| i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj, |
| bool write); |
| int __must_check |
| i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write); |
| int __must_check |
| i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, |
| u32 alignment, |
| struct intel_engine_cs *pipelined, |
| struct drm_i915_gem_request **pipelined_request, |
| const struct i915_ggtt_view *view); |
| void i915_gem_object_unpin_from_display_plane(struct drm_i915_gem_object *obj, |
| const struct i915_ggtt_view *view); |
| int i915_gem_object_attach_phys(struct drm_i915_gem_object *obj, |
| int align); |
| int i915_gem_open(struct drm_device *dev, struct drm_file *file); |
| void i915_gem_release(struct drm_device *dev, struct drm_file *file); |
| |
| uint32_t |
| i915_gem_get_gtt_size(struct drm_device *dev, uint32_t size, int tiling_mode); |
| uint32_t |
| i915_gem_get_gtt_alignment(struct drm_device *dev, uint32_t size, |
| int tiling_mode, bool fenced); |
| |
| int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj, |
| enum i915_cache_level cache_level); |
| |
| struct drm_gem_object *i915_gem_prime_import(struct drm_device *dev, |
| struct dma_buf *dma_buf); |
| |
| struct dma_buf *i915_gem_prime_export(struct drm_device *dev, |
| struct drm_gem_object *gem_obj, int flags); |
| |
| u64 i915_gem_obj_ggtt_offset_view(struct drm_i915_gem_object *o, |
| const struct i915_ggtt_view *view); |
| u64 i915_gem_obj_offset(struct drm_i915_gem_object *o, |
| struct i915_address_space *vm); |
| static inline u64 |
| i915_gem_obj_ggtt_offset(struct drm_i915_gem_object *o) |
| { |
| return i915_gem_obj_ggtt_offset_view(o, &i915_ggtt_view_normal); |
| } |
| |
| bool i915_gem_obj_bound_any(struct drm_i915_gem_object *o); |
| bool i915_gem_obj_ggtt_bound_view(struct drm_i915_gem_object *o, |
| const struct i915_ggtt_view *view); |
| bool i915_gem_obj_bound(struct drm_i915_gem_object *o, |
| struct i915_address_space *vm); |
| |
| unsigned long i915_gem_obj_size(struct drm_i915_gem_object *o, |
| struct i915_address_space *vm); |
| struct i915_vma * |
| i915_gem_obj_to_vma(struct drm_i915_gem_object *obj, |
| struct i915_address_space *vm); |
| struct i915_vma * |
| i915_gem_obj_to_ggtt_view(struct drm_i915_gem_object *obj, |
| const struct i915_ggtt_view *view); |
| |
| struct i915_vma * |
| i915_gem_obj_lookup_or_create_vma(struct drm_i915_gem_object *obj, |
| struct i915_address_space *vm); |
| struct i915_vma * |
| i915_gem_obj_lookup_or_create_ggtt_vma(struct drm_i915_gem_object *obj, |
| const struct i915_ggtt_view *view); |
| |
| static inline struct i915_vma * |
| i915_gem_obj_to_ggtt(struct drm_i915_gem_object *obj) |
| { |
| return i915_gem_obj_to_ggtt_view(obj, &i915_ggtt_view_normal); |
| } |
| bool i915_gem_obj_is_pinned(struct drm_i915_gem_object *obj); |
| |
| /* Some GGTT VM helpers */ |
| #define i915_obj_to_ggtt(obj) \ |
| (&((struct drm_i915_private *)(obj)->base.dev->dev_private)->gtt.base) |
| static inline bool i915_is_ggtt(struct i915_address_space *vm) |
| { |
| struct i915_address_space *ggtt = |
| &((struct drm_i915_private *)(vm)->dev->dev_private)->gtt.base; |
| return vm == ggtt; |
| } |
| |
| static inline struct i915_hw_ppgtt * |
| i915_vm_to_ppgtt(struct i915_address_space *vm) |
| { |
| WARN_ON(i915_is_ggtt(vm)); |
| |
| return container_of(vm, struct i915_hw_ppgtt, base); |
| } |
| |
| |
| static inline bool i915_gem_obj_ggtt_bound(struct drm_i915_gem_object *obj) |
| { |
| return i915_gem_obj_ggtt_bound_view(obj, &i915_ggtt_view_normal); |
| } |
| |
| static inline unsigned long |
| i915_gem_obj_ggtt_size(struct drm_i915_gem_object *obj) |
| { |
| return i915_gem_obj_size(obj, i915_obj_to_ggtt(obj)); |
| } |
| |
| static inline int __must_check |
| i915_gem_obj_ggtt_pin(struct drm_i915_gem_object *obj, |
| uint32_t alignment, |
| unsigned flags) |
| { |
| return i915_gem_object_pin(obj, i915_obj_to_ggtt(obj), |
| alignment, flags | PIN_GLOBAL); |
| } |
| |
| static inline int |
| i915_gem_object_ggtt_unbind(struct drm_i915_gem_object *obj) |
| { |
| return i915_vma_unbind(i915_gem_obj_to_ggtt(obj)); |
| } |
| |
| void i915_gem_object_ggtt_unpin_view(struct drm_i915_gem_object *obj, |
| const struct i915_ggtt_view *view); |
| static inline void |
| i915_gem_object_ggtt_unpin(struct drm_i915_gem_object *obj) |
| { |
| i915_gem_object_ggtt_unpin_view(obj, &i915_ggtt_view_normal); |
| } |
| |
| /* i915_gem_fence.c */ |
| int __must_check i915_gem_object_get_fence(struct drm_i915_gem_object *obj); |
| int __must_check i915_gem_object_put_fence(struct drm_i915_gem_object *obj); |
| |
| bool i915_gem_object_pin_fence(struct drm_i915_gem_object *obj); |
| void i915_gem_object_unpin_fence(struct drm_i915_gem_object *obj); |
| |
| void i915_gem_restore_fences(struct drm_device *dev); |
| |
| void i915_gem_detect_bit_6_swizzle(struct drm_device *dev); |
| void i915_gem_object_do_bit_17_swizzle(struct drm_i915_gem_object *obj); |
| void i915_gem_object_save_bit_17_swizzle(struct drm_i915_gem_object *obj); |
| |
| /* i915_gem_context.c */ |
| int __must_check i915_gem_context_init(struct drm_device *dev); |
| void i915_gem_context_fini(struct drm_device *dev); |
| void i915_gem_context_reset(struct drm_device *dev); |
| int i915_gem_context_open(struct drm_device *dev, struct drm_file *file); |
| int i915_gem_context_enable(struct drm_i915_gem_request *req); |
| void i915_gem_context_close(struct drm_device *dev, struct drm_file *file); |
| int i915_switch_context(struct drm_i915_gem_request *req); |
| struct intel_context * |
| i915_gem_context_get(struct drm_i915_file_private *file_priv, u32 id); |
| void i915_gem_context_free(struct kref *ctx_ref); |
| struct drm_i915_gem_object * |
| i915_gem_alloc_context_obj(struct drm_device *dev, size_t size); |
| static inline void i915_gem_context_reference(struct intel_context *ctx) |
| { |
| kref_get(&ctx->ref); |
| } |
| |
| static inline void i915_gem_context_unreference(struct intel_context *ctx) |
| { |
| kref_put(&ctx->ref, i915_gem_context_free); |
| } |
| |
| static inline bool i915_gem_context_is_default(const struct intel_context *c) |
| { |
| return c->user_handle == DEFAULT_CONTEXT_HANDLE; |
| } |
| |
| int i915_gem_context_create_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file); |
| int i915_gem_context_destroy_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file); |
| int i915_gem_context_getparam_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_context_setparam_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| |
| /* i915_gem_evict.c */ |
| int __must_check i915_gem_evict_something(struct drm_device *dev, |
| struct i915_address_space *vm, |
| int min_size, |
| unsigned alignment, |
| unsigned cache_level, |
| unsigned long start, |
| unsigned long end, |
| unsigned flags); |
| int i915_gem_evict_vm(struct i915_address_space *vm, bool do_idle); |
| |
| /* belongs in i915_gem_gtt.h */ |
| static inline void i915_gem_chipset_flush(struct drm_device *dev) |
| { |
| if (INTEL_INFO(dev)->gen < 6) |
| intel_gtt_chipset_flush(); |
| } |
| |
| /* i915_gem_stolen.c */ |
| int i915_gem_stolen_insert_node(struct drm_i915_private *dev_priv, |
| struct drm_mm_node *node, u64 size, |
| unsigned alignment); |
| int i915_gem_stolen_insert_node_in_range(struct drm_i915_private *dev_priv, |
| struct drm_mm_node *node, u64 size, |
| unsigned alignment, u64 start, |
| u64 end); |
| void i915_gem_stolen_remove_node(struct drm_i915_private *dev_priv, |
| struct drm_mm_node *node); |
| int i915_gem_init_stolen(struct drm_device *dev); |
| void i915_gem_cleanup_stolen(struct drm_device *dev); |
| struct drm_i915_gem_object * |
| i915_gem_object_create_stolen(struct drm_device *dev, u32 size); |
| struct drm_i915_gem_object * |
| i915_gem_object_create_stolen_for_preallocated(struct drm_device *dev, |
| u32 stolen_offset, |
| u32 gtt_offset, |
| u32 size); |
| |
| /* i915_gem_shrinker.c */ |
| unsigned long i915_gem_shrink(struct drm_i915_private *dev_priv, |
| unsigned long target, |
| unsigned flags); |
| #define I915_SHRINK_PURGEABLE 0x1 |
| #define I915_SHRINK_UNBOUND 0x2 |
| #define I915_SHRINK_BOUND 0x4 |
| #define I915_SHRINK_ACTIVE 0x8 |
| unsigned long i915_gem_shrink_all(struct drm_i915_private *dev_priv); |
| void i915_gem_shrinker_init(struct drm_i915_private *dev_priv); |
| |
| |
| /* i915_gem_tiling.c */ |
| static inline bool i915_gem_object_needs_bit17_swizzle(struct drm_i915_gem_object *obj) |
| { |
| struct drm_i915_private *dev_priv = obj->base.dev->dev_private; |
| |
| return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 && |
| obj->tiling_mode != I915_TILING_NONE; |
| } |
| |
| /* i915_gem_debug.c */ |
| #if WATCH_LISTS |
| int i915_verify_lists(struct drm_device *dev); |
| #else |
| #define i915_verify_lists(dev) 0 |
| #endif |
| |
| /* i915_debugfs.c */ |
| int i915_debugfs_init(struct drm_minor *minor); |
| void i915_debugfs_cleanup(struct drm_minor *minor); |
| #ifdef CONFIG_DEBUG_FS |
| int i915_debugfs_connector_add(struct drm_connector *connector); |
| void intel_display_crc_init(struct drm_device *dev); |
| #else |
| static inline int i915_debugfs_connector_add(struct drm_connector *connector) |
| { return 0; } |
| static inline void intel_display_crc_init(struct drm_device *dev) {} |
| #endif |
| |
| /* i915_gpu_error.c */ |
| __printf(2, 3) |
| void i915_error_printf(struct drm_i915_error_state_buf *e, const char *f, ...); |
| int i915_error_state_to_str(struct drm_i915_error_state_buf *estr, |
| const struct i915_error_state_file_priv *error); |
| int i915_error_state_buf_init(struct drm_i915_error_state_buf *eb, |
| struct drm_i915_private *i915, |
| size_t count, loff_t pos); |
| static inline void i915_error_state_buf_release( |
| struct drm_i915_error_state_buf *eb) |
| { |
| kfree(eb->buf); |
| } |
| void i915_capture_error_state(struct drm_device *dev, bool wedge, |
| const char *error_msg); |
| void i915_error_state_get(struct drm_device *dev, |
| struct i915_error_state_file_priv *error_priv); |
| void i915_error_state_put(struct i915_error_state_file_priv *error_priv); |
| void i915_destroy_error_state(struct drm_device *dev); |
| |
| void i915_get_extra_instdone(struct drm_device *dev, uint32_t *instdone); |
| const char *i915_cache_level_str(struct drm_i915_private *i915, int type); |
| |
| /* i915_cmd_parser.c */ |
| int i915_cmd_parser_get_version(void); |
| int i915_cmd_parser_init_ring(struct intel_engine_cs *ring); |
| void i915_cmd_parser_fini_ring(struct intel_engine_cs *ring); |
| bool i915_needs_cmd_parser(struct intel_engine_cs *ring); |
| int i915_parse_cmds(struct intel_engine_cs *ring, |
| struct drm_i915_gem_object *batch_obj, |
| struct drm_i915_gem_object *shadow_batch_obj, |
| u32 batch_start_offset, |
| u32 batch_len, |
| bool is_master); |
| |
| /* i915_suspend.c */ |
| extern int i915_save_state(struct drm_device *dev); |
| extern int i915_restore_state(struct drm_device *dev); |
| |
| /* i915_sysfs.c */ |
| void i915_setup_sysfs(struct drm_device *dev_priv); |
| void i915_teardown_sysfs(struct drm_device *dev_priv); |
| |
| /* intel_i2c.c */ |
| extern int intel_setup_gmbus(struct drm_device *dev); |
| extern void intel_teardown_gmbus(struct drm_device *dev); |
| extern bool intel_gmbus_is_valid_pin(struct drm_i915_private *dev_priv, |
| unsigned int pin); |
| |
| extern struct i2c_adapter * |
| intel_gmbus_get_adapter(struct drm_i915_private *dev_priv, unsigned int pin); |
| extern void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed); |
| extern void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit); |
| static inline bool intel_gmbus_is_forced_bit(struct i2c_adapter *adapter) |
| { |
| return container_of(adapter, struct intel_gmbus, adapter)->force_bit; |
| } |
| extern void intel_i2c_reset(struct drm_device *dev); |
| |
| /* intel_opregion.c */ |
| #ifdef CONFIG_ACPI |
| extern int intel_opregion_setup(struct drm_device *dev); |
| extern void intel_opregion_init(struct drm_device *dev); |
| extern void intel_opregion_fini(struct drm_device *dev); |
| extern void intel_opregion_asle_intr(struct drm_device *dev); |
| extern int intel_opregion_notify_encoder(struct intel_encoder *intel_encoder, |
| bool enable); |
| extern int intel_opregion_notify_adapter(struct drm_device *dev, |
| pci_power_t state); |
| #else |
| static inline int intel_opregion_setup(struct drm_device *dev) { return 0; } |
| static inline void intel_opregion_init(struct drm_device *dev) { return; } |
| static inline void intel_opregion_fini(struct drm_device *dev) { return; } |
| static inline void intel_opregion_asle_intr(struct drm_device *dev) { return; } |
| static inline int |
| intel_opregion_notify_encoder(struct intel_encoder *intel_encoder, bool enable) |
| { |
| return 0; |
| } |
| static inline int |
| intel_opregion_notify_adapter(struct drm_device *dev, pci_power_t state) |
| { |
| return 0; |
| } |
| #endif |
| |
| /* intel_acpi.c */ |
| #ifdef CONFIG_ACPI |
| extern void intel_register_dsm_handler(void); |
| extern void intel_unregister_dsm_handler(void); |
| #else |
| static inline void intel_register_dsm_handler(void) { return; } |
| static inline void intel_unregister_dsm_handler(void) { return; } |
| #endif /* CONFIG_ACPI */ |
| |
| /* modesetting */ |
| extern void intel_modeset_init_hw(struct drm_device *dev); |
| extern void intel_modeset_init(struct drm_device *dev); |
| extern void intel_modeset_gem_init(struct drm_device *dev); |
| extern void intel_modeset_cleanup(struct drm_device *dev); |
| extern void intel_connector_unregister(struct intel_connector *); |
| extern int intel_modeset_vga_set_state(struct drm_device *dev, bool state); |
| extern void intel_display_resume(struct drm_device *dev); |
| extern void i915_redisable_vga(struct drm_device *dev); |
| extern void i915_redisable_vga_power_on(struct drm_device *dev); |
| extern bool ironlake_set_drps(struct drm_device *dev, u8 val); |
| extern void intel_init_pch_refclk(struct drm_device *dev); |
| extern void intel_set_rps(struct drm_device *dev, u8 val); |
| extern void intel_set_memory_cxsr(struct drm_i915_private *dev_priv, |
| bool enable); |
| extern void intel_detect_pch(struct drm_device *dev); |
| extern int intel_trans_dp_port_sel(struct drm_crtc *crtc); |
| extern int intel_enable_rc6(const struct drm_device *dev); |
| |
| extern bool i915_semaphore_is_enabled(struct drm_device *dev); |
| int i915_reg_read_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file); |
| int i915_get_reset_stats_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file); |
| |
| /* overlay */ |
| extern struct intel_overlay_error_state *intel_overlay_capture_error_state(struct drm_device *dev); |
| extern void intel_overlay_print_error_state(struct drm_i915_error_state_buf *e, |
| struct intel_overlay_error_state *error); |
| |
| extern struct intel_display_error_state *intel_display_capture_error_state(struct drm_device *dev); |
| extern void intel_display_print_error_state(struct drm_i915_error_state_buf *e, |
| struct drm_device *dev, |
| struct intel_display_error_state *error); |
| |
| int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val); |
| int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u32 mbox, u32 val); |
| |
| /* intel_sideband.c */ |
| u32 vlv_punit_read(struct drm_i915_private *dev_priv, u32 addr); |
| void vlv_punit_write(struct drm_i915_private *dev_priv, u32 addr, u32 val); |
| u32 vlv_nc_read(struct drm_i915_private *dev_priv, u8 addr); |
| u32 vlv_gpio_nc_read(struct drm_i915_private *dev_priv, u32 reg); |
| void vlv_gpio_nc_write(struct drm_i915_private *dev_priv, u32 reg, u32 val); |
| u32 vlv_cck_read(struct drm_i915_private *dev_priv, u32 reg); |
| void vlv_cck_write(struct drm_i915_private *dev_priv, u32 reg, u32 val); |
| u32 vlv_ccu_read(struct drm_i915_private *dev_priv, u32 reg); |
| void vlv_ccu_write(struct drm_i915_private *dev_priv, u32 reg, u32 val); |
| u32 vlv_bunit_read(struct drm_i915_private *dev_priv, u32 reg); |
| void vlv_bunit_write(struct drm_i915_private *dev_priv, u32 reg, u32 val); |
| u32 vlv_gps_core_read(struct drm_i915_private *dev_priv, u32 reg); |
| void vlv_gps_core_write(struct drm_i915_private *dev_priv, u32 reg, u32 val); |
| u32 vlv_dpio_read(struct drm_i915_private *dev_priv, enum pipe pipe, int reg); |
| void vlv_dpio_write(struct drm_i915_private *dev_priv, enum pipe pipe, int reg, u32 val); |
| u32 intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg, |
| enum intel_sbi_destination destination); |
| void intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value, |
| enum intel_sbi_destination destination); |
| u32 vlv_flisdsi_read(struct drm_i915_private *dev_priv, u32 reg); |
| void vlv_flisdsi_write(struct drm_i915_private *dev_priv, u32 reg, u32 val); |
| |
| int intel_gpu_freq(struct drm_i915_private *dev_priv, int val); |
| int intel_freq_opcode(struct drm_i915_private *dev_priv, int val); |
| |
| #define I915_READ8(reg) dev_priv->uncore.funcs.mmio_readb(dev_priv, (reg), true) |
| #define I915_WRITE8(reg, val) dev_priv->uncore.funcs.mmio_writeb(dev_priv, (reg), (val), true) |
| |
| #define I915_READ16(reg) dev_priv->uncore.funcs.mmio_readw(dev_priv, (reg), true) |
| #define I915_WRITE16(reg, val) dev_priv->uncore.funcs.mmio_writew(dev_priv, (reg), (val), true) |
| #define I915_READ16_NOTRACE(reg) dev_priv->uncore.funcs.mmio_readw(dev_priv, (reg), false) |
| #define I915_WRITE16_NOTRACE(reg, val) dev_priv->uncore.funcs.mmio_writew(dev_priv, (reg), (val), false) |
| |
| #define I915_READ(reg) dev_priv->uncore.funcs.mmio_readl(dev_priv, (reg), true) |
| #define I915_WRITE(reg, val) dev_priv->uncore.funcs.mmio_writel(dev_priv, (reg), (val), true) |
| #define I915_READ_NOTRACE(reg) dev_priv->uncore.funcs.mmio_readl(dev_priv, (reg), false) |
| #define I915_WRITE_NOTRACE(reg, val) dev_priv->uncore.funcs.mmio_writel(dev_priv, (reg), (val), false) |
| |
| /* Be very careful with read/write 64-bit values. On 32-bit machines, they |
| * will be implemented using 2 32-bit writes in an arbitrary order with |
| * an arbitrary delay between them. This can cause the hardware to |
| * act upon the intermediate value, possibly leading to corruption and |
| * machine death. You have been warned. |
| */ |
| #define I915_WRITE64(reg, val) dev_priv->uncore.funcs.mmio_writeq(dev_priv, (reg), (val), true) |
| #define I915_READ64(reg) dev_priv->uncore.funcs.mmio_readq(dev_priv, (reg), true) |
| |
| #define I915_READ64_2x32(lower_reg, upper_reg) ({ \ |
| u32 upper, lower, old_upper, loop = 0; \ |
| upper = I915_READ(upper_reg); \ |
| do { \ |
| old_upper = upper; \ |
| lower = I915_READ(lower_reg); \ |
| upper = I915_READ(upper_reg); \ |
| } while (upper != old_upper && loop++ < 2); \ |
| (u64)upper << 32 | lower; }) |
| |
| #define POSTING_READ(reg) (void)I915_READ_NOTRACE(reg) |
| #define POSTING_READ16(reg) (void)I915_READ16_NOTRACE(reg) |
| |
| /* These are untraced mmio-accessors that are only valid to be used inside |
| * criticial sections inside IRQ handlers where forcewake is explicitly |
| * controlled. |
| * Think twice, and think again, before using these. |
| * Note: Should only be used between intel_uncore_forcewake_irqlock() and |
| * intel_uncore_forcewake_irqunlock(). |
| */ |
| #define I915_READ_FW(reg__) readl(dev_priv->regs + (reg__)) |
| #define I915_WRITE_FW(reg__, val__) writel(val__, dev_priv->regs + (reg__)) |
| #define POSTING_READ_FW(reg__) (void)I915_READ_FW(reg__) |
| |
| /* "Broadcast RGB" property */ |
| #define INTEL_BROADCAST_RGB_AUTO 0 |
| #define INTEL_BROADCAST_RGB_FULL 1 |
| #define INTEL_BROADCAST_RGB_LIMITED 2 |
| |
| static inline uint32_t i915_vgacntrl_reg(struct drm_device *dev) |
| { |
| if (IS_VALLEYVIEW(dev)) |
| return VLV_VGACNTRL; |
| else if (INTEL_INFO(dev)->gen >= 5) |
| return CPU_VGACNTRL; |
| else |
| return VGACNTRL; |
| } |
| |
| static inline void __user *to_user_ptr(u64 address) |
| { |
| return (void __user *)(uintptr_t)address; |
| } |
| |
| static inline unsigned long msecs_to_jiffies_timeout(const unsigned int m) |
| { |
| unsigned long j = msecs_to_jiffies(m); |
| |
| return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1); |
| } |
| |
| static inline unsigned long nsecs_to_jiffies_timeout(const u64 n) |
| { |
| return min_t(u64, MAX_JIFFY_OFFSET, nsecs_to_jiffies64(n) + 1); |
| } |
| |
| static inline unsigned long |
| timespec_to_jiffies_timeout(const struct timespec *value) |
| { |
| unsigned long j = timespec_to_jiffies(value); |
| |
| return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1); |
| } |
| |
| /* |
| * If you need to wait X milliseconds between events A and B, but event B |
| * doesn't happen exactly after event A, you record the timestamp (jiffies) of |
| * when event A happened, then just before event B you call this function and |
| * pass the timestamp as the first argument, and X as the second argument. |
| */ |
| static inline void |
| wait_remaining_ms_from_jiffies(unsigned long timestamp_jiffies, int to_wait_ms) |
| { |
| unsigned long target_jiffies, tmp_jiffies, remaining_jiffies; |
| |
| /* |
| * Don't re-read the value of "jiffies" every time since it may change |
| * behind our back and break the math. |
| */ |
| tmp_jiffies = jiffies; |
| target_jiffies = timestamp_jiffies + |
| msecs_to_jiffies_timeout(to_wait_ms); |
| |
| if (time_after(target_jiffies, tmp_jiffies)) { |
| remaining_jiffies = target_jiffies - tmp_jiffies; |
| while (remaining_jiffies) |
| remaining_jiffies = |
| schedule_timeout_uninterruptible(remaining_jiffies); |
| } |
| } |
| |
| static inline void i915_trace_irq_get(struct intel_engine_cs *ring, |
| struct drm_i915_gem_request *req) |
| { |
| if (ring->trace_irq_req == NULL && ring->irq_get(ring)) |
| i915_gem_request_assign(&ring->trace_irq_req, req); |
| } |
| |
| #endif |