| /* |
| * linux/net/sunrpc/xprt.c |
| * |
| * This is a generic RPC call interface supporting congestion avoidance, |
| * and asynchronous calls. |
| * |
| * The interface works like this: |
| * |
| * - When a process places a call, it allocates a request slot if |
| * one is available. Otherwise, it sleeps on the backlog queue |
| * (xprt_reserve). |
| * - Next, the caller puts together the RPC message, stuffs it into |
| * the request struct, and calls xprt_transmit(). |
| * - xprt_transmit sends the message and installs the caller on the |
| * transport's wait list. At the same time, it installs a timer that |
| * is run after the packet's timeout has expired. |
| * - When a packet arrives, the data_ready handler walks the list of |
| * pending requests for that transport. If a matching XID is found, the |
| * caller is woken up, and the timer removed. |
| * - When no reply arrives within the timeout interval, the timer is |
| * fired by the kernel and runs xprt_timer(). It either adjusts the |
| * timeout values (minor timeout) or wakes up the caller with a status |
| * of -ETIMEDOUT. |
| * - When the caller receives a notification from RPC that a reply arrived, |
| * it should release the RPC slot, and process the reply. |
| * If the call timed out, it may choose to retry the operation by |
| * adjusting the initial timeout value, and simply calling rpc_call |
| * again. |
| * |
| * Support for async RPC is done through a set of RPC-specific scheduling |
| * primitives that `transparently' work for processes as well as async |
| * tasks that rely on callbacks. |
| * |
| * Copyright (C) 1995-1997, Olaf Kirch <okir@monad.swb.de> |
| * |
| * Transport switch API copyright (C) 2005, Chuck Lever <cel@netapp.com> |
| */ |
| |
| #include <linux/module.h> |
| |
| #include <linux/types.h> |
| #include <linux/interrupt.h> |
| #include <linux/workqueue.h> |
| #include <linux/net.h> |
| |
| #include <linux/sunrpc/clnt.h> |
| #include <linux/sunrpc/metrics.h> |
| |
| /* |
| * Local variables |
| */ |
| |
| #ifdef RPC_DEBUG |
| # define RPCDBG_FACILITY RPCDBG_XPRT |
| #endif |
| |
| /* |
| * Local functions |
| */ |
| static void xprt_request_init(struct rpc_task *, struct rpc_xprt *); |
| static inline void do_xprt_reserve(struct rpc_task *); |
| static void xprt_connect_status(struct rpc_task *task); |
| static int __xprt_get_cong(struct rpc_xprt *, struct rpc_task *); |
| |
| /* |
| * The transport code maintains an estimate on the maximum number of out- |
| * standing RPC requests, using a smoothed version of the congestion |
| * avoidance implemented in 44BSD. This is basically the Van Jacobson |
| * congestion algorithm: If a retransmit occurs, the congestion window is |
| * halved; otherwise, it is incremented by 1/cwnd when |
| * |
| * - a reply is received and |
| * - a full number of requests are outstanding and |
| * - the congestion window hasn't been updated recently. |
| */ |
| #define RPC_CWNDSHIFT (8U) |
| #define RPC_CWNDSCALE (1U << RPC_CWNDSHIFT) |
| #define RPC_INITCWND RPC_CWNDSCALE |
| #define RPC_MAXCWND(xprt) ((xprt)->max_reqs << RPC_CWNDSHIFT) |
| |
| #define RPCXPRT_CONGESTED(xprt) ((xprt)->cong >= (xprt)->cwnd) |
| |
| /** |
| * xprt_reserve_xprt - serialize write access to transports |
| * @task: task that is requesting access to the transport |
| * |
| * This prevents mixing the payload of separate requests, and prevents |
| * transport connects from colliding with writes. No congestion control |
| * is provided. |
| */ |
| int xprt_reserve_xprt(struct rpc_task *task) |
| { |
| struct rpc_xprt *xprt = task->tk_xprt; |
| struct rpc_rqst *req = task->tk_rqstp; |
| |
| if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) { |
| if (task == xprt->snd_task) |
| return 1; |
| if (task == NULL) |
| return 0; |
| goto out_sleep; |
| } |
| xprt->snd_task = task; |
| if (req) { |
| req->rq_bytes_sent = 0; |
| req->rq_ntrans++; |
| } |
| return 1; |
| |
| out_sleep: |
| dprintk("RPC: %4d failed to lock transport %p\n", |
| task->tk_pid, xprt); |
| task->tk_timeout = 0; |
| task->tk_status = -EAGAIN; |
| if (req && req->rq_ntrans) |
| rpc_sleep_on(&xprt->resend, task, NULL, NULL); |
| else |
| rpc_sleep_on(&xprt->sending, task, NULL, NULL); |
| return 0; |
| } |
| |
| static void xprt_clear_locked(struct rpc_xprt *xprt) |
| { |
| xprt->snd_task = NULL; |
| if (!test_bit(XPRT_CLOSE_WAIT, &xprt->state) || xprt->shutdown) { |
| smp_mb__before_clear_bit(); |
| clear_bit(XPRT_LOCKED, &xprt->state); |
| smp_mb__after_clear_bit(); |
| } else |
| schedule_work(&xprt->task_cleanup); |
| } |
| |
| /* |
| * xprt_reserve_xprt_cong - serialize write access to transports |
| * @task: task that is requesting access to the transport |
| * |
| * Same as xprt_reserve_xprt, but Van Jacobson congestion control is |
| * integrated into the decision of whether a request is allowed to be |
| * woken up and given access to the transport. |
| */ |
| int xprt_reserve_xprt_cong(struct rpc_task *task) |
| { |
| struct rpc_xprt *xprt = task->tk_xprt; |
| struct rpc_rqst *req = task->tk_rqstp; |
| |
| if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) { |
| if (task == xprt->snd_task) |
| return 1; |
| goto out_sleep; |
| } |
| if (__xprt_get_cong(xprt, task)) { |
| xprt->snd_task = task; |
| if (req) { |
| req->rq_bytes_sent = 0; |
| req->rq_ntrans++; |
| } |
| return 1; |
| } |
| xprt_clear_locked(xprt); |
| out_sleep: |
| dprintk("RPC: %4d failed to lock transport %p\n", task->tk_pid, xprt); |
| task->tk_timeout = 0; |
| task->tk_status = -EAGAIN; |
| if (req && req->rq_ntrans) |
| rpc_sleep_on(&xprt->resend, task, NULL, NULL); |
| else |
| rpc_sleep_on(&xprt->sending, task, NULL, NULL); |
| return 0; |
| } |
| |
| static inline int xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task) |
| { |
| int retval; |
| |
| spin_lock_bh(&xprt->transport_lock); |
| retval = xprt->ops->reserve_xprt(task); |
| spin_unlock_bh(&xprt->transport_lock); |
| return retval; |
| } |
| |
| static void __xprt_lock_write_next(struct rpc_xprt *xprt) |
| { |
| struct rpc_task *task; |
| struct rpc_rqst *req; |
| |
| if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) |
| return; |
| |
| task = rpc_wake_up_next(&xprt->resend); |
| if (!task) { |
| task = rpc_wake_up_next(&xprt->sending); |
| if (!task) |
| goto out_unlock; |
| } |
| |
| req = task->tk_rqstp; |
| xprt->snd_task = task; |
| if (req) { |
| req->rq_bytes_sent = 0; |
| req->rq_ntrans++; |
| } |
| return; |
| |
| out_unlock: |
| xprt_clear_locked(xprt); |
| } |
| |
| static void __xprt_lock_write_next_cong(struct rpc_xprt *xprt) |
| { |
| struct rpc_task *task; |
| |
| if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) |
| return; |
| if (RPCXPRT_CONGESTED(xprt)) |
| goto out_unlock; |
| task = rpc_wake_up_next(&xprt->resend); |
| if (!task) { |
| task = rpc_wake_up_next(&xprt->sending); |
| if (!task) |
| goto out_unlock; |
| } |
| if (__xprt_get_cong(xprt, task)) { |
| struct rpc_rqst *req = task->tk_rqstp; |
| xprt->snd_task = task; |
| if (req) { |
| req->rq_bytes_sent = 0; |
| req->rq_ntrans++; |
| } |
| return; |
| } |
| out_unlock: |
| xprt_clear_locked(xprt); |
| } |
| |
| /** |
| * xprt_release_xprt - allow other requests to use a transport |
| * @xprt: transport with other tasks potentially waiting |
| * @task: task that is releasing access to the transport |
| * |
| * Note that "task" can be NULL. No congestion control is provided. |
| */ |
| void xprt_release_xprt(struct rpc_xprt *xprt, struct rpc_task *task) |
| { |
| if (xprt->snd_task == task) { |
| xprt_clear_locked(xprt); |
| __xprt_lock_write_next(xprt); |
| } |
| } |
| |
| /** |
| * xprt_release_xprt_cong - allow other requests to use a transport |
| * @xprt: transport with other tasks potentially waiting |
| * @task: task that is releasing access to the transport |
| * |
| * Note that "task" can be NULL. Another task is awoken to use the |
| * transport if the transport's congestion window allows it. |
| */ |
| void xprt_release_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task) |
| { |
| if (xprt->snd_task == task) { |
| xprt_clear_locked(xprt); |
| __xprt_lock_write_next_cong(xprt); |
| } |
| } |
| |
| static inline void xprt_release_write(struct rpc_xprt *xprt, struct rpc_task *task) |
| { |
| spin_lock_bh(&xprt->transport_lock); |
| xprt->ops->release_xprt(xprt, task); |
| spin_unlock_bh(&xprt->transport_lock); |
| } |
| |
| /* |
| * Van Jacobson congestion avoidance. Check if the congestion window |
| * overflowed. Put the task to sleep if this is the case. |
| */ |
| static int |
| __xprt_get_cong(struct rpc_xprt *xprt, struct rpc_task *task) |
| { |
| struct rpc_rqst *req = task->tk_rqstp; |
| |
| if (req->rq_cong) |
| return 1; |
| dprintk("RPC: %4d xprt_cwnd_limited cong = %ld cwnd = %ld\n", |
| task->tk_pid, xprt->cong, xprt->cwnd); |
| if (RPCXPRT_CONGESTED(xprt)) |
| return 0; |
| req->rq_cong = 1; |
| xprt->cong += RPC_CWNDSCALE; |
| return 1; |
| } |
| |
| /* |
| * Adjust the congestion window, and wake up the next task |
| * that has been sleeping due to congestion |
| */ |
| static void |
| __xprt_put_cong(struct rpc_xprt *xprt, struct rpc_rqst *req) |
| { |
| if (!req->rq_cong) |
| return; |
| req->rq_cong = 0; |
| xprt->cong -= RPC_CWNDSCALE; |
| __xprt_lock_write_next_cong(xprt); |
| } |
| |
| /** |
| * xprt_release_rqst_cong - housekeeping when request is complete |
| * @task: RPC request that recently completed |
| * |
| * Useful for transports that require congestion control. |
| */ |
| void xprt_release_rqst_cong(struct rpc_task *task) |
| { |
| __xprt_put_cong(task->tk_xprt, task->tk_rqstp); |
| } |
| |
| /** |
| * xprt_adjust_cwnd - adjust transport congestion window |
| * @task: recently completed RPC request used to adjust window |
| * @result: result code of completed RPC request |
| * |
| * We use a time-smoothed congestion estimator to avoid heavy oscillation. |
| */ |
| void xprt_adjust_cwnd(struct rpc_task *task, int result) |
| { |
| struct rpc_rqst *req = task->tk_rqstp; |
| struct rpc_xprt *xprt = task->tk_xprt; |
| unsigned long cwnd = xprt->cwnd; |
| |
| if (result >= 0 && cwnd <= xprt->cong) { |
| /* The (cwnd >> 1) term makes sure |
| * the result gets rounded properly. */ |
| cwnd += (RPC_CWNDSCALE * RPC_CWNDSCALE + (cwnd >> 1)) / cwnd; |
| if (cwnd > RPC_MAXCWND(xprt)) |
| cwnd = RPC_MAXCWND(xprt); |
| __xprt_lock_write_next_cong(xprt); |
| } else if (result == -ETIMEDOUT) { |
| cwnd >>= 1; |
| if (cwnd < RPC_CWNDSCALE) |
| cwnd = RPC_CWNDSCALE; |
| } |
| dprintk("RPC: cong %ld, cwnd was %ld, now %ld\n", |
| xprt->cong, xprt->cwnd, cwnd); |
| xprt->cwnd = cwnd; |
| __xprt_put_cong(xprt, req); |
| } |
| |
| /** |
| * xprt_wake_pending_tasks - wake all tasks on a transport's pending queue |
| * @xprt: transport with waiting tasks |
| * @status: result code to plant in each task before waking it |
| * |
| */ |
| void xprt_wake_pending_tasks(struct rpc_xprt *xprt, int status) |
| { |
| if (status < 0) |
| rpc_wake_up_status(&xprt->pending, status); |
| else |
| rpc_wake_up(&xprt->pending); |
| } |
| |
| /** |
| * xprt_wait_for_buffer_space - wait for transport output buffer to clear |
| * @task: task to be put to sleep |
| * |
| */ |
| void xprt_wait_for_buffer_space(struct rpc_task *task) |
| { |
| struct rpc_rqst *req = task->tk_rqstp; |
| struct rpc_xprt *xprt = req->rq_xprt; |
| |
| task->tk_timeout = req->rq_timeout; |
| rpc_sleep_on(&xprt->pending, task, NULL, NULL); |
| } |
| |
| /** |
| * xprt_write_space - wake the task waiting for transport output buffer space |
| * @xprt: transport with waiting tasks |
| * |
| * Can be called in a soft IRQ context, so xprt_write_space never sleeps. |
| */ |
| void xprt_write_space(struct rpc_xprt *xprt) |
| { |
| if (unlikely(xprt->shutdown)) |
| return; |
| |
| spin_lock_bh(&xprt->transport_lock); |
| if (xprt->snd_task) { |
| dprintk("RPC: write space: waking waiting task on xprt %p\n", |
| xprt); |
| rpc_wake_up_task(xprt->snd_task); |
| } |
| spin_unlock_bh(&xprt->transport_lock); |
| } |
| |
| /** |
| * xprt_set_retrans_timeout_def - set a request's retransmit timeout |
| * @task: task whose timeout is to be set |
| * |
| * Set a request's retransmit timeout based on the transport's |
| * default timeout parameters. Used by transports that don't adjust |
| * the retransmit timeout based on round-trip time estimation. |
| */ |
| void xprt_set_retrans_timeout_def(struct rpc_task *task) |
| { |
| task->tk_timeout = task->tk_rqstp->rq_timeout; |
| } |
| |
| /* |
| * xprt_set_retrans_timeout_rtt - set a request's retransmit timeout |
| * @task: task whose timeout is to be set |
| * |
| * Set a request's retransmit timeout using the RTT estimator. |
| */ |
| void xprt_set_retrans_timeout_rtt(struct rpc_task *task) |
| { |
| int timer = task->tk_msg.rpc_proc->p_timer; |
| struct rpc_rtt *rtt = task->tk_client->cl_rtt; |
| struct rpc_rqst *req = task->tk_rqstp; |
| unsigned long max_timeout = req->rq_xprt->timeout.to_maxval; |
| |
| task->tk_timeout = rpc_calc_rto(rtt, timer); |
| task->tk_timeout <<= rpc_ntimeo(rtt, timer) + req->rq_retries; |
| if (task->tk_timeout > max_timeout || task->tk_timeout == 0) |
| task->tk_timeout = max_timeout; |
| } |
| |
| static void xprt_reset_majortimeo(struct rpc_rqst *req) |
| { |
| struct rpc_timeout *to = &req->rq_xprt->timeout; |
| |
| req->rq_majortimeo = req->rq_timeout; |
| if (to->to_exponential) |
| req->rq_majortimeo <<= to->to_retries; |
| else |
| req->rq_majortimeo += to->to_increment * to->to_retries; |
| if (req->rq_majortimeo > to->to_maxval || req->rq_majortimeo == 0) |
| req->rq_majortimeo = to->to_maxval; |
| req->rq_majortimeo += jiffies; |
| } |
| |
| /** |
| * xprt_adjust_timeout - adjust timeout values for next retransmit |
| * @req: RPC request containing parameters to use for the adjustment |
| * |
| */ |
| int xprt_adjust_timeout(struct rpc_rqst *req) |
| { |
| struct rpc_xprt *xprt = req->rq_xprt; |
| struct rpc_timeout *to = &xprt->timeout; |
| int status = 0; |
| |
| if (time_before(jiffies, req->rq_majortimeo)) { |
| if (to->to_exponential) |
| req->rq_timeout <<= 1; |
| else |
| req->rq_timeout += to->to_increment; |
| if (to->to_maxval && req->rq_timeout >= to->to_maxval) |
| req->rq_timeout = to->to_maxval; |
| req->rq_retries++; |
| pprintk("RPC: %lu retrans\n", jiffies); |
| } else { |
| req->rq_timeout = to->to_initval; |
| req->rq_retries = 0; |
| xprt_reset_majortimeo(req); |
| /* Reset the RTT counters == "slow start" */ |
| spin_lock_bh(&xprt->transport_lock); |
| rpc_init_rtt(req->rq_task->tk_client->cl_rtt, to->to_initval); |
| spin_unlock_bh(&xprt->transport_lock); |
| pprintk("RPC: %lu timeout\n", jiffies); |
| status = -ETIMEDOUT; |
| } |
| |
| if (req->rq_timeout == 0) { |
| printk(KERN_WARNING "xprt_adjust_timeout: rq_timeout = 0!\n"); |
| req->rq_timeout = 5 * HZ; |
| } |
| return status; |
| } |
| |
| static void xprt_autoclose(void *args) |
| { |
| struct rpc_xprt *xprt = (struct rpc_xprt *)args; |
| |
| xprt_disconnect(xprt); |
| xprt->ops->close(xprt); |
| xprt_release_write(xprt, NULL); |
| } |
| |
| /** |
| * xprt_disconnect - mark a transport as disconnected |
| * @xprt: transport to flag for disconnect |
| * |
| */ |
| void xprt_disconnect(struct rpc_xprt *xprt) |
| { |
| dprintk("RPC: disconnected transport %p\n", xprt); |
| spin_lock_bh(&xprt->transport_lock); |
| xprt_clear_connected(xprt); |
| xprt_wake_pending_tasks(xprt, -ENOTCONN); |
| spin_unlock_bh(&xprt->transport_lock); |
| } |
| |
| static void |
| xprt_init_autodisconnect(unsigned long data) |
| { |
| struct rpc_xprt *xprt = (struct rpc_xprt *)data; |
| |
| spin_lock(&xprt->transport_lock); |
| if (!list_empty(&xprt->recv) || xprt->shutdown) |
| goto out_abort; |
| if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) |
| goto out_abort; |
| spin_unlock(&xprt->transport_lock); |
| if (xprt_connecting(xprt)) |
| xprt_release_write(xprt, NULL); |
| else |
| schedule_work(&xprt->task_cleanup); |
| return; |
| out_abort: |
| spin_unlock(&xprt->transport_lock); |
| } |
| |
| /** |
| * xprt_connect - schedule a transport connect operation |
| * @task: RPC task that is requesting the connect |
| * |
| */ |
| void xprt_connect(struct rpc_task *task) |
| { |
| struct rpc_xprt *xprt = task->tk_xprt; |
| |
| dprintk("RPC: %4d xprt_connect xprt %p %s connected\n", task->tk_pid, |
| xprt, (xprt_connected(xprt) ? "is" : "is not")); |
| |
| if (!xprt->addr.sin_port) { |
| task->tk_status = -EIO; |
| return; |
| } |
| if (!xprt_lock_write(xprt, task)) |
| return; |
| if (xprt_connected(xprt)) |
| xprt_release_write(xprt, task); |
| else { |
| if (task->tk_rqstp) |
| task->tk_rqstp->rq_bytes_sent = 0; |
| |
| task->tk_timeout = xprt->connect_timeout; |
| rpc_sleep_on(&xprt->pending, task, xprt_connect_status, NULL); |
| xprt->stat.connect_start = jiffies; |
| xprt->ops->connect(task); |
| } |
| return; |
| } |
| |
| static void xprt_connect_status(struct rpc_task *task) |
| { |
| struct rpc_xprt *xprt = task->tk_xprt; |
| |
| if (task->tk_status >= 0) { |
| xprt->stat.connect_count++; |
| xprt->stat.connect_time += (long)jiffies - xprt->stat.connect_start; |
| dprintk("RPC: %4d xprt_connect_status: connection established\n", |
| task->tk_pid); |
| return; |
| } |
| |
| switch (task->tk_status) { |
| case -ECONNREFUSED: |
| case -ECONNRESET: |
| dprintk("RPC: %4d xprt_connect_status: server %s refused connection\n", |
| task->tk_pid, task->tk_client->cl_server); |
| break; |
| case -ENOTCONN: |
| dprintk("RPC: %4d xprt_connect_status: connection broken\n", |
| task->tk_pid); |
| break; |
| case -ETIMEDOUT: |
| dprintk("RPC: %4d xprt_connect_status: connect attempt timed out\n", |
| task->tk_pid); |
| break; |
| default: |
| dprintk("RPC: %4d xprt_connect_status: error %d connecting to server %s\n", |
| task->tk_pid, -task->tk_status, task->tk_client->cl_server); |
| xprt_release_write(xprt, task); |
| task->tk_status = -EIO; |
| return; |
| } |
| |
| /* if soft mounted, just cause this RPC to fail */ |
| if (RPC_IS_SOFT(task)) { |
| xprt_release_write(xprt, task); |
| task->tk_status = -EIO; |
| } |
| } |
| |
| /** |
| * xprt_lookup_rqst - find an RPC request corresponding to an XID |
| * @xprt: transport on which the original request was transmitted |
| * @xid: RPC XID of incoming reply |
| * |
| */ |
| struct rpc_rqst *xprt_lookup_rqst(struct rpc_xprt *xprt, u32 xid) |
| { |
| struct list_head *pos; |
| |
| list_for_each(pos, &xprt->recv) { |
| struct rpc_rqst *entry = list_entry(pos, struct rpc_rqst, rq_list); |
| if (entry->rq_xid == xid) |
| return entry; |
| } |
| xprt->stat.bad_xids++; |
| return NULL; |
| } |
| |
| /** |
| * xprt_update_rtt - update an RPC client's RTT state after receiving a reply |
| * @task: RPC request that recently completed |
| * |
| */ |
| void xprt_update_rtt(struct rpc_task *task) |
| { |
| struct rpc_rqst *req = task->tk_rqstp; |
| struct rpc_rtt *rtt = task->tk_client->cl_rtt; |
| unsigned timer = task->tk_msg.rpc_proc->p_timer; |
| |
| if (timer) { |
| if (req->rq_ntrans == 1) |
| rpc_update_rtt(rtt, timer, |
| (long)jiffies - req->rq_xtime); |
| rpc_set_timeo(rtt, timer, req->rq_ntrans - 1); |
| } |
| } |
| |
| /** |
| * xprt_complete_rqst - called when reply processing is complete |
| * @task: RPC request that recently completed |
| * @copied: actual number of bytes received from the transport |
| * |
| * Caller holds transport lock. |
| */ |
| void xprt_complete_rqst(struct rpc_task *task, int copied) |
| { |
| struct rpc_rqst *req = task->tk_rqstp; |
| |
| dprintk("RPC: %5u xid %08x complete (%d bytes received)\n", |
| task->tk_pid, ntohl(req->rq_xid), copied); |
| |
| task->tk_xprt->stat.recvs++; |
| task->tk_rtt = (long)jiffies - req->rq_xtime; |
| |
| list_del_init(&req->rq_list); |
| /* Ensure all writes are done before we update req->rq_received */ |
| smp_wmb(); |
| req->rq_received = req->rq_private_buf.len = copied; |
| rpc_wake_up_task(task); |
| } |
| |
| static void xprt_timer(struct rpc_task *task) |
| { |
| struct rpc_rqst *req = task->tk_rqstp; |
| struct rpc_xprt *xprt = req->rq_xprt; |
| |
| dprintk("RPC: %4d xprt_timer\n", task->tk_pid); |
| |
| spin_lock(&xprt->transport_lock); |
| if (!req->rq_received) { |
| if (xprt->ops->timer) |
| xprt->ops->timer(task); |
| task->tk_status = -ETIMEDOUT; |
| } |
| task->tk_timeout = 0; |
| rpc_wake_up_task(task); |
| spin_unlock(&xprt->transport_lock); |
| } |
| |
| /** |
| * xprt_prepare_transmit - reserve the transport before sending a request |
| * @task: RPC task about to send a request |
| * |
| */ |
| int xprt_prepare_transmit(struct rpc_task *task) |
| { |
| struct rpc_rqst *req = task->tk_rqstp; |
| struct rpc_xprt *xprt = req->rq_xprt; |
| int err = 0; |
| |
| dprintk("RPC: %4d xprt_prepare_transmit\n", task->tk_pid); |
| |
| spin_lock_bh(&xprt->transport_lock); |
| if (req->rq_received && !req->rq_bytes_sent) { |
| err = req->rq_received; |
| goto out_unlock; |
| } |
| if (!xprt->ops->reserve_xprt(task)) { |
| err = -EAGAIN; |
| goto out_unlock; |
| } |
| |
| if (!xprt_connected(xprt)) { |
| err = -ENOTCONN; |
| goto out_unlock; |
| } |
| out_unlock: |
| spin_unlock_bh(&xprt->transport_lock); |
| return err; |
| } |
| |
| void |
| xprt_abort_transmit(struct rpc_task *task) |
| { |
| struct rpc_xprt *xprt = task->tk_xprt; |
| |
| xprt_release_write(xprt, task); |
| } |
| |
| /** |
| * xprt_transmit - send an RPC request on a transport |
| * @task: controlling RPC task |
| * |
| * We have to copy the iovec because sendmsg fiddles with its contents. |
| */ |
| void xprt_transmit(struct rpc_task *task) |
| { |
| struct rpc_rqst *req = task->tk_rqstp; |
| struct rpc_xprt *xprt = req->rq_xprt; |
| int status; |
| |
| dprintk("RPC: %4d xprt_transmit(%u)\n", task->tk_pid, req->rq_slen); |
| |
| if (!req->rq_received) { |
| if (list_empty(&req->rq_list)) { |
| spin_lock_bh(&xprt->transport_lock); |
| /* Update the softirq receive buffer */ |
| memcpy(&req->rq_private_buf, &req->rq_rcv_buf, |
| sizeof(req->rq_private_buf)); |
| /* Add request to the receive list */ |
| list_add_tail(&req->rq_list, &xprt->recv); |
| spin_unlock_bh(&xprt->transport_lock); |
| xprt_reset_majortimeo(req); |
| /* Turn off autodisconnect */ |
| del_singleshot_timer_sync(&xprt->timer); |
| } |
| } else if (!req->rq_bytes_sent) |
| return; |
| |
| status = xprt->ops->send_request(task); |
| if (status == 0) { |
| dprintk("RPC: %4d xmit complete\n", task->tk_pid); |
| spin_lock_bh(&xprt->transport_lock); |
| |
| xprt->ops->set_retrans_timeout(task); |
| |
| xprt->stat.sends++; |
| xprt->stat.req_u += xprt->stat.sends - xprt->stat.recvs; |
| xprt->stat.bklog_u += xprt->backlog.qlen; |
| |
| /* Don't race with disconnect */ |
| if (!xprt_connected(xprt)) |
| task->tk_status = -ENOTCONN; |
| else if (!req->rq_received) |
| rpc_sleep_on(&xprt->pending, task, NULL, xprt_timer); |
| |
| xprt->ops->release_xprt(xprt, task); |
| spin_unlock_bh(&xprt->transport_lock); |
| return; |
| } |
| |
| /* Note: at this point, task->tk_sleeping has not yet been set, |
| * hence there is no danger of the waking up task being put on |
| * schedq, and being picked up by a parallel run of rpciod(). |
| */ |
| task->tk_status = status; |
| |
| switch (status) { |
| case -ECONNREFUSED: |
| rpc_sleep_on(&xprt->sending, task, NULL, NULL); |
| case -EAGAIN: |
| case -ENOTCONN: |
| return; |
| default: |
| break; |
| } |
| xprt_release_write(xprt, task); |
| return; |
| } |
| |
| static inline void do_xprt_reserve(struct rpc_task *task) |
| { |
| struct rpc_xprt *xprt = task->tk_xprt; |
| |
| task->tk_status = 0; |
| if (task->tk_rqstp) |
| return; |
| if (!list_empty(&xprt->free)) { |
| struct rpc_rqst *req = list_entry(xprt->free.next, struct rpc_rqst, rq_list); |
| list_del_init(&req->rq_list); |
| task->tk_rqstp = req; |
| xprt_request_init(task, xprt); |
| return; |
| } |
| dprintk("RPC: waiting for request slot\n"); |
| task->tk_status = -EAGAIN; |
| task->tk_timeout = 0; |
| rpc_sleep_on(&xprt->backlog, task, NULL, NULL); |
| } |
| |
| /** |
| * xprt_reserve - allocate an RPC request slot |
| * @task: RPC task requesting a slot allocation |
| * |
| * If no more slots are available, place the task on the transport's |
| * backlog queue. |
| */ |
| void xprt_reserve(struct rpc_task *task) |
| { |
| struct rpc_xprt *xprt = task->tk_xprt; |
| |
| task->tk_status = -EIO; |
| spin_lock(&xprt->reserve_lock); |
| do_xprt_reserve(task); |
| spin_unlock(&xprt->reserve_lock); |
| } |
| |
| static inline u32 xprt_alloc_xid(struct rpc_xprt *xprt) |
| { |
| return xprt->xid++; |
| } |
| |
| static inline void xprt_init_xid(struct rpc_xprt *xprt) |
| { |
| xprt->xid = net_random(); |
| } |
| |
| static void xprt_request_init(struct rpc_task *task, struct rpc_xprt *xprt) |
| { |
| struct rpc_rqst *req = task->tk_rqstp; |
| |
| req->rq_timeout = xprt->timeout.to_initval; |
| req->rq_task = task; |
| req->rq_xprt = xprt; |
| req->rq_buffer = NULL; |
| req->rq_bufsize = 0; |
| req->rq_xid = xprt_alloc_xid(xprt); |
| req->rq_release_snd_buf = NULL; |
| dprintk("RPC: %4d reserved req %p xid %08x\n", task->tk_pid, |
| req, ntohl(req->rq_xid)); |
| } |
| |
| /** |
| * xprt_release - release an RPC request slot |
| * @task: task which is finished with the slot |
| * |
| */ |
| void xprt_release(struct rpc_task *task) |
| { |
| struct rpc_xprt *xprt = task->tk_xprt; |
| struct rpc_rqst *req; |
| |
| if (!(req = task->tk_rqstp)) |
| return; |
| rpc_count_iostats(task); |
| spin_lock_bh(&xprt->transport_lock); |
| xprt->ops->release_xprt(xprt, task); |
| if (xprt->ops->release_request) |
| xprt->ops->release_request(task); |
| if (!list_empty(&req->rq_list)) |
| list_del(&req->rq_list); |
| xprt->last_used = jiffies; |
| if (list_empty(&xprt->recv)) |
| mod_timer(&xprt->timer, |
| xprt->last_used + xprt->idle_timeout); |
| spin_unlock_bh(&xprt->transport_lock); |
| xprt->ops->buf_free(task); |
| task->tk_rqstp = NULL; |
| if (req->rq_release_snd_buf) |
| req->rq_release_snd_buf(req); |
| memset(req, 0, sizeof(*req)); /* mark unused */ |
| |
| dprintk("RPC: %4d release request %p\n", task->tk_pid, req); |
| |
| spin_lock(&xprt->reserve_lock); |
| list_add(&req->rq_list, &xprt->free); |
| rpc_wake_up_next(&xprt->backlog); |
| spin_unlock(&xprt->reserve_lock); |
| } |
| |
| /** |
| * xprt_set_timeout - set constant RPC timeout |
| * @to: RPC timeout parameters to set up |
| * @retr: number of retries |
| * @incr: amount of increase after each retry |
| * |
| */ |
| void xprt_set_timeout(struct rpc_timeout *to, unsigned int retr, unsigned long incr) |
| { |
| to->to_initval = |
| to->to_increment = incr; |
| to->to_maxval = to->to_initval + (incr * retr); |
| to->to_retries = retr; |
| to->to_exponential = 0; |
| } |
| |
| static struct rpc_xprt *xprt_setup(int proto, struct sockaddr_in *ap, struct rpc_timeout *to) |
| { |
| int result; |
| struct rpc_xprt *xprt; |
| struct rpc_rqst *req; |
| |
| if ((xprt = kzalloc(sizeof(struct rpc_xprt), GFP_KERNEL)) == NULL) |
| return ERR_PTR(-ENOMEM); |
| |
| xprt->addr = *ap; |
| |
| switch (proto) { |
| case IPPROTO_UDP: |
| result = xs_setup_udp(xprt, to); |
| break; |
| case IPPROTO_TCP: |
| result = xs_setup_tcp(xprt, to); |
| break; |
| default: |
| printk(KERN_ERR "RPC: unrecognized transport protocol: %d\n", |
| proto); |
| result = -EIO; |
| break; |
| } |
| if (result) { |
| kfree(xprt); |
| return ERR_PTR(result); |
| } |
| |
| spin_lock_init(&xprt->transport_lock); |
| spin_lock_init(&xprt->reserve_lock); |
| |
| INIT_LIST_HEAD(&xprt->free); |
| INIT_LIST_HEAD(&xprt->recv); |
| INIT_WORK(&xprt->task_cleanup, xprt_autoclose, xprt); |
| init_timer(&xprt->timer); |
| xprt->timer.function = xprt_init_autodisconnect; |
| xprt->timer.data = (unsigned long) xprt; |
| xprt->last_used = jiffies; |
| xprt->cwnd = RPC_INITCWND; |
| |
| rpc_init_wait_queue(&xprt->pending, "xprt_pending"); |
| rpc_init_wait_queue(&xprt->sending, "xprt_sending"); |
| rpc_init_wait_queue(&xprt->resend, "xprt_resend"); |
| rpc_init_priority_wait_queue(&xprt->backlog, "xprt_backlog"); |
| |
| /* initialize free list */ |
| for (req = &xprt->slot[xprt->max_reqs-1]; req >= &xprt->slot[0]; req--) |
| list_add(&req->rq_list, &xprt->free); |
| |
| xprt_init_xid(xprt); |
| |
| dprintk("RPC: created transport %p with %u slots\n", xprt, |
| xprt->max_reqs); |
| |
| return xprt; |
| } |
| |
| /** |
| * xprt_create_proto - create an RPC client transport |
| * @proto: requested transport protocol |
| * @sap: remote peer's address |
| * @to: timeout parameters for new transport |
| * |
| */ |
| struct rpc_xprt *xprt_create_proto(int proto, struct sockaddr_in *sap, struct rpc_timeout *to) |
| { |
| struct rpc_xprt *xprt; |
| |
| xprt = xprt_setup(proto, sap, to); |
| if (IS_ERR(xprt)) |
| dprintk("RPC: xprt_create_proto failed\n"); |
| else |
| dprintk("RPC: xprt_create_proto created xprt %p\n", xprt); |
| return xprt; |
| } |
| |
| /** |
| * xprt_destroy - destroy an RPC transport, killing off all requests. |
| * @xprt: transport to destroy |
| * |
| */ |
| int xprt_destroy(struct rpc_xprt *xprt) |
| { |
| dprintk("RPC: destroying transport %p\n", xprt); |
| xprt->shutdown = 1; |
| del_timer_sync(&xprt->timer); |
| xprt->ops->destroy(xprt); |
| kfree(xprt); |
| |
| return 0; |
| } |