| /* |
| * logfile.h - Defines for NTFS kernel journal ($LogFile) handling. Part of |
| * the Linux-NTFS project. |
| * |
| * Copyright (c) 2000-2005 Anton Altaparmakov |
| * |
| * This program/include file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as published |
| * by the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program/include file is distributed in the hope that it will be |
| * useful, but WITHOUT ANY WARRANTY; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program (in the main directory of the Linux-NTFS |
| * distribution in the file COPYING); if not, write to the Free Software |
| * Foundation,Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #ifndef _LINUX_NTFS_LOGFILE_H |
| #define _LINUX_NTFS_LOGFILE_H |
| |
| #ifdef NTFS_RW |
| |
| #include <linux/fs.h> |
| |
| #include "types.h" |
| #include "endian.h" |
| #include "layout.h" |
| |
| /* |
| * Journal ($LogFile) organization: |
| * |
| * Two restart areas present in the first two pages (restart pages, one restart |
| * area in each page). When the volume is dismounted they should be identical, |
| * except for the update sequence array which usually has a different update |
| * sequence number. |
| * |
| * These are followed by log records organized in pages headed by a log record |
| * header going up to log file size. Not all pages contain log records when a |
| * volume is first formatted, but as the volume ages, all records will be used. |
| * When the log file fills up, the records at the beginning are purged (by |
| * modifying the oldest_lsn to a higher value presumably) and writing begins |
| * at the beginning of the file. Effectively, the log file is viewed as a |
| * circular entity. |
| * |
| * NOTE: Windows NT, 2000, and XP all use log file version 1.1 but they accept |
| * versions <= 1.x, including 0.-1. (Yes, that is a minus one in there!) We |
| * probably only want to support 1.1 as this seems to be the current version |
| * and we don't know how that differs from the older versions. The only |
| * exception is if the journal is clean as marked by the two restart pages |
| * then it doesn't matter whether we are on an earlier version. We can just |
| * reinitialize the logfile and start again with version 1.1. |
| */ |
| |
| /* Some $LogFile related constants. */ |
| #define MaxLogFileSize 0x100000000ULL |
| #define DefaultLogPageSize 4096 |
| #define MinLogRecordPages 48 |
| |
| /* |
| * Log file restart page header (begins the restart area). |
| */ |
| typedef struct { |
| /*Ofs*/ |
| /* 0 NTFS_RECORD; -- Unfolded here as gcc doesn't like unnamed structs. */ |
| /* 0*/ NTFS_RECORD_TYPE magic; /* The magic is "RSTR". */ |
| /* 4*/ le16 usa_ofs; /* See NTFS_RECORD definition in layout.h. |
| When creating, set this to be immediately |
| after this header structure (without any |
| alignment). */ |
| /* 6*/ le16 usa_count; /* See NTFS_RECORD definition in layout.h. */ |
| |
| /* 8*/ leLSN chkdsk_lsn; /* The last log file sequence number found by |
| chkdsk. Only used when the magic is changed |
| to "CHKD". Otherwise this is zero. */ |
| /* 16*/ le32 system_page_size; /* Byte size of system pages when the log file |
| was created, has to be >= 512 and a power of |
| 2. Use this to calculate the required size |
| of the usa (usa_count) and add it to usa_ofs. |
| Then verify that the result is less than the |
| value of the restart_area_offset. */ |
| /* 20*/ le32 log_page_size; /* Byte size of log file pages, has to be >= |
| 512 and a power of 2. The default is 4096 |
| and is used when the system page size is |
| between 4096 and 8192. Otherwise this is |
| set to the system page size instead. */ |
| /* 24*/ le16 restart_area_offset;/* Byte offset from the start of this header to |
| the RESTART_AREA. Value has to be aligned |
| to 8-byte boundary. When creating, set this |
| to be after the usa. */ |
| /* 26*/ sle16 minor_ver; /* Log file minor version. Only check if major |
| version is 1. */ |
| /* 28*/ sle16 major_ver; /* Log file major version. We only support |
| version 1.1. */ |
| /* sizeof() = 30 (0x1e) bytes */ |
| } __attribute__ ((__packed__)) RESTART_PAGE_HEADER; |
| |
| /* |
| * Constant for the log client indices meaning that there are no client records |
| * in this particular client array. Also inside the client records themselves, |
| * this means that there are no client records preceding or following this one. |
| */ |
| #define LOGFILE_NO_CLIENT const_cpu_to_le16(0xffff) |
| #define LOGFILE_NO_CLIENT_CPU 0xffff |
| |
| /* |
| * These are the so far known RESTART_AREA_* flags (16-bit) which contain |
| * information about the log file in which they are present. |
| */ |
| enum { |
| RESTART_VOLUME_IS_CLEAN = const_cpu_to_le16(0x0002), |
| RESTART_SPACE_FILLER = 0xffff, /* gcc: Force enum bit width to 16. */ |
| } __attribute__ ((__packed__)); |
| |
| typedef le16 RESTART_AREA_FLAGS; |
| |
| /* |
| * Log file restart area record. The offset of this record is found by adding |
| * the offset of the RESTART_PAGE_HEADER to the restart_area_offset value found |
| * in it. See notes at restart_area_offset above. |
| */ |
| typedef struct { |
| /*Ofs*/ |
| /* 0*/ leLSN current_lsn; /* The current, i.e. last LSN inside the log |
| when the restart area was last written. |
| This happens often but what is the interval? |
| Is it just fixed time or is it every time a |
| check point is written or somethine else? |
| On create set to 0. */ |
| /* 8*/ le16 log_clients; /* Number of log client records in the array of |
| log client records which follows this |
| restart area. Must be 1. */ |
| /* 10*/ le16 client_free_list; /* The index of the first free log client record |
| in the array of log client records. |
| LOGFILE_NO_CLIENT means that there are no |
| free log client records in the array. |
| If != LOGFILE_NO_CLIENT, check that |
| log_clients > client_free_list. On Win2k |
| and presumably earlier, on a clean volume |
| this is != LOGFILE_NO_CLIENT, and it should |
| be 0, i.e. the first (and only) client |
| record is free and thus the logfile is |
| closed and hence clean. A dirty volume |
| would have left the logfile open and hence |
| this would be LOGFILE_NO_CLIENT. On WinXP |
| and presumably later, the logfile is always |
| open, even on clean shutdown so this should |
| always be LOGFILE_NO_CLIENT. */ |
| /* 12*/ le16 client_in_use_list;/* The index of the first in-use log client |
| record in the array of log client records. |
| LOGFILE_NO_CLIENT means that there are no |
| in-use log client records in the array. If |
| != LOGFILE_NO_CLIENT check that log_clients |
| > client_in_use_list. On Win2k and |
| presumably earlier, on a clean volume this |
| is LOGFILE_NO_CLIENT, i.e. there are no |
| client records in use and thus the logfile |
| is closed and hence clean. A dirty volume |
| would have left the logfile open and hence |
| this would be != LOGFILE_NO_CLIENT, and it |
| should be 0, i.e. the first (and only) |
| client record is in use. On WinXP and |
| presumably later, the logfile is always |
| open, even on clean shutdown so this should |
| always be 0. */ |
| /* 14*/ RESTART_AREA_FLAGS flags;/* Flags modifying LFS behaviour. On Win2k |
| and presumably earlier this is always 0. On |
| WinXP and presumably later, if the logfile |
| was shutdown cleanly, the second bit, |
| RESTART_VOLUME_IS_CLEAN, is set. This bit |
| is cleared when the volume is mounted by |
| WinXP and set when the volume is dismounted, |
| thus if the logfile is dirty, this bit is |
| clear. Thus we don't need to check the |
| Windows version to determine if the logfile |
| is clean. Instead if the logfile is closed, |
| we know it must be clean. If it is open and |
| this bit is set, we also know it must be |
| clean. If on the other hand the logfile is |
| open and this bit is clear, we can be almost |
| certain that the logfile is dirty. */ |
| /* 16*/ le32 seq_number_bits; /* How many bits to use for the sequence |
| number. This is calculated as 67 - the |
| number of bits required to store the logfile |
| size in bytes and this can be used in with |
| the specified file_size as a consistency |
| check. */ |
| /* 20*/ le16 restart_area_length;/* Length of the restart area including the |
| client array. Following checks required if |
| version matches. Otherwise, skip them. |
| restart_area_offset + restart_area_length |
| has to be <= system_page_size. Also, |
| restart_area_length has to be >= |
| client_array_offset + (log_clients * |
| sizeof(log client record)). */ |
| /* 22*/ le16 client_array_offset;/* Offset from the start of this record to |
| the first log client record if versions are |
| matched. When creating, set this to be |
| after this restart area structure, aligned |
| to 8-bytes boundary. If the versions do not |
| match, this is ignored and the offset is |
| assumed to be (sizeof(RESTART_AREA) + 7) & |
| ~7, i.e. rounded up to first 8-byte |
| boundary. Either way, client_array_offset |
| has to be aligned to an 8-byte boundary. |
| Also, restart_area_offset + |
| client_array_offset has to be <= 510. |
| Finally, client_array_offset + (log_clients |
| * sizeof(log client record)) has to be <= |
| system_page_size. On Win2k and presumably |
| earlier, this is 0x30, i.e. immediately |
| following this record. On WinXP and |
| presumably later, this is 0x40, i.e. there |
| are 16 extra bytes between this record and |
| the client array. This probably means that |
| the RESTART_AREA record is actually bigger |
| in WinXP and later. */ |
| /* 24*/ sle64 file_size; /* Usable byte size of the log file. If the |
| restart_area_offset + the offset of the |
| file_size are > 510 then corruption has |
| occured. This is the very first check when |
| starting with the restart_area as if it |
| fails it means that some of the above values |
| will be corrupted by the multi sector |
| transfer protection. The file_size has to |
| be rounded down to be a multiple of the |
| log_page_size in the RESTART_PAGE_HEADER and |
| then it has to be at least big enough to |
| store the two restart pages and 48 (0x30) |
| log record pages. */ |
| /* 32*/ le32 last_lsn_data_length;/* Length of data of last LSN, not including |
| the log record header. On create set to |
| 0. */ |
| /* 36*/ le16 log_record_header_length;/* Byte size of the log record header. |
| If the version matches then check that the |
| value of log_record_header_length is a |
| multiple of 8, i.e. |
| (log_record_header_length + 7) & ~7 == |
| log_record_header_length. When creating set |
| it to sizeof(LOG_RECORD_HEADER), aligned to |
| 8 bytes. */ |
| /* 38*/ le16 log_page_data_offset;/* Offset to the start of data in a log record |
| page. Must be a multiple of 8. On create |
| set it to immediately after the update |
| sequence array of the log record page. */ |
| /* 40*/ le32 restart_log_open_count;/* A counter that gets incremented every |
| time the logfile is restarted which happens |
| at mount time when the logfile is opened. |
| When creating set to a random value. Win2k |
| sets it to the low 32 bits of the current |
| system time in NTFS format (see time.h). */ |
| /* 44*/ le32 reserved; /* Reserved/alignment to 8-byte boundary. */ |
| /* sizeof() = 48 (0x30) bytes */ |
| } __attribute__ ((__packed__)) RESTART_AREA; |
| |
| /* |
| * Log client record. The offset of this record is found by adding the offset |
| * of the RESTART_AREA to the client_array_offset value found in it. |
| */ |
| typedef struct { |
| /*Ofs*/ |
| /* 0*/ leLSN oldest_lsn; /* Oldest LSN needed by this client. On create |
| set to 0. */ |
| /* 8*/ leLSN client_restart_lsn;/* LSN at which this client needs to restart |
| the volume, i.e. the current position within |
| the log file. At present, if clean this |
| should = current_lsn in restart area but it |
| probably also = current_lsn when dirty most |
| of the time. At create set to 0. */ |
| /* 16*/ le16 prev_client; /* The offset to the previous log client record |
| in the array of log client records. |
| LOGFILE_NO_CLIENT means there is no previous |
| client record, i.e. this is the first one. |
| This is always LOGFILE_NO_CLIENT. */ |
| /* 18*/ le16 next_client; /* The offset to the next log client record in |
| the array of log client records. |
| LOGFILE_NO_CLIENT means there are no next |
| client records, i.e. this is the last one. |
| This is always LOGFILE_NO_CLIENT. */ |
| /* 20*/ le16 seq_number; /* On Win2k and presumably earlier, this is set |
| to zero every time the logfile is restarted |
| and it is incremented when the logfile is |
| closed at dismount time. Thus it is 0 when |
| dirty and 1 when clean. On WinXP and |
| presumably later, this is always 0. */ |
| /* 22*/ u8 reserved[6]; /* Reserved/alignment. */ |
| /* 28*/ le32 client_name_length;/* Length of client name in bytes. Should |
| always be 8. */ |
| /* 32*/ ntfschar client_name[64];/* Name of the client in Unicode. Should |
| always be "NTFS" with the remaining bytes |
| set to 0. */ |
| /* sizeof() = 160 (0xa0) bytes */ |
| } __attribute__ ((__packed__)) LOG_CLIENT_RECORD; |
| |
| extern BOOL ntfs_check_logfile(struct inode *log_vi, |
| RESTART_PAGE_HEADER **rp); |
| |
| extern BOOL ntfs_is_logfile_clean(struct inode *log_vi, |
| const RESTART_PAGE_HEADER *rp); |
| |
| extern BOOL ntfs_empty_logfile(struct inode *log_vi); |
| |
| #endif /* NTFS_RW */ |
| |
| #endif /* _LINUX_NTFS_LOGFILE_H */ |