| /* |
| * Copyright © 2011 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| * |
| * Authors: |
| * Jesse Barnes <jbarnes@virtuousgeek.org> |
| * |
| * New plane/sprite handling. |
| * |
| * The older chips had a separate interface for programming plane related |
| * registers; newer ones are much simpler and we can use the new DRM plane |
| * support. |
| */ |
| #include <drm/drmP.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_fourcc.h> |
| #include <drm/drm_rect.h> |
| #include "intel_drv.h" |
| #include <drm/i915_drm.h> |
| #include "i915_drv.h" |
| |
| static int usecs_to_scanlines(const struct drm_display_mode *mode, int usecs) |
| { |
| /* paranoia */ |
| if (!mode->crtc_htotal) |
| return 1; |
| |
| return DIV_ROUND_UP(usecs * mode->crtc_clock, 1000 * mode->crtc_htotal); |
| } |
| |
| static bool intel_pipe_update_start(struct intel_crtc *crtc, uint32_t *start_vbl_count) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| const struct drm_display_mode *mode = &crtc->config.adjusted_mode; |
| enum pipe pipe = crtc->pipe; |
| long timeout = msecs_to_jiffies_timeout(1); |
| int scanline, min, max, vblank_start; |
| DEFINE_WAIT(wait); |
| |
| WARN_ON(!mutex_is_locked(&crtc->base.mutex)); |
| |
| vblank_start = mode->crtc_vblank_start; |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) |
| vblank_start = DIV_ROUND_UP(vblank_start, 2); |
| |
| /* FIXME needs to be calibrated sensibly */ |
| min = vblank_start - usecs_to_scanlines(mode, 100); |
| max = vblank_start - 1; |
| |
| if (min <= 0 || max <= 0) |
| return false; |
| |
| if (WARN_ON(drm_vblank_get(dev, pipe))) |
| return false; |
| |
| local_irq_disable(); |
| |
| trace_i915_pipe_update_start(crtc, min, max); |
| |
| for (;;) { |
| /* |
| * prepare_to_wait() has a memory barrier, which guarantees |
| * other CPUs can see the task state update by the time we |
| * read the scanline. |
| */ |
| prepare_to_wait(&crtc->vbl_wait, &wait, TASK_UNINTERRUPTIBLE); |
| |
| scanline = intel_get_crtc_scanline(crtc); |
| if (scanline < min || scanline > max) |
| break; |
| |
| if (timeout <= 0) { |
| DRM_ERROR("Potential atomic update failure on pipe %c\n", |
| pipe_name(crtc->pipe)); |
| break; |
| } |
| |
| local_irq_enable(); |
| |
| timeout = schedule_timeout(timeout); |
| |
| local_irq_disable(); |
| } |
| |
| finish_wait(&crtc->vbl_wait, &wait); |
| |
| drm_vblank_put(dev, pipe); |
| |
| *start_vbl_count = dev->driver->get_vblank_counter(dev, pipe); |
| |
| trace_i915_pipe_update_vblank_evaded(crtc, min, max, *start_vbl_count); |
| |
| return true; |
| } |
| |
| static void intel_pipe_update_end(struct intel_crtc *crtc, u32 start_vbl_count) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| enum pipe pipe = crtc->pipe; |
| u32 end_vbl_count = dev->driver->get_vblank_counter(dev, pipe); |
| |
| trace_i915_pipe_update_end(crtc, end_vbl_count); |
| |
| local_irq_enable(); |
| |
| if (start_vbl_count != end_vbl_count) |
| DRM_ERROR("Atomic update failure on pipe %c (start=%u end=%u)\n", |
| pipe_name(pipe), start_vbl_count, end_vbl_count); |
| } |
| |
| static void intel_update_primary_plane(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| int reg = DSPCNTR(crtc->plane); |
| |
| if (crtc->primary_enabled) |
| I915_WRITE(reg, I915_READ(reg) | DISPLAY_PLANE_ENABLE); |
| else |
| I915_WRITE(reg, I915_READ(reg) & ~DISPLAY_PLANE_ENABLE); |
| } |
| |
| static void |
| vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc, |
| struct drm_framebuffer *fb, |
| struct drm_i915_gem_object *obj, int crtc_x, int crtc_y, |
| unsigned int crtc_w, unsigned int crtc_h, |
| uint32_t x, uint32_t y, |
| uint32_t src_w, uint32_t src_h) |
| { |
| struct drm_device *dev = dplane->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_plane *intel_plane = to_intel_plane(dplane); |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| int pipe = intel_plane->pipe; |
| int plane = intel_plane->plane; |
| u32 sprctl; |
| unsigned long sprsurf_offset, linear_offset; |
| int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0); |
| u32 start_vbl_count; |
| bool atomic_update; |
| |
| sprctl = I915_READ(SPCNTR(pipe, plane)); |
| |
| /* Mask out pixel format bits in case we change it */ |
| sprctl &= ~SP_PIXFORMAT_MASK; |
| sprctl &= ~SP_YUV_BYTE_ORDER_MASK; |
| sprctl &= ~SP_TILED; |
| |
| switch (fb->pixel_format) { |
| case DRM_FORMAT_YUYV: |
| sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_YUYV; |
| break; |
| case DRM_FORMAT_YVYU: |
| sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_YVYU; |
| break; |
| case DRM_FORMAT_UYVY: |
| sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_UYVY; |
| break; |
| case DRM_FORMAT_VYUY: |
| sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_VYUY; |
| break; |
| case DRM_FORMAT_RGB565: |
| sprctl |= SP_FORMAT_BGR565; |
| break; |
| case DRM_FORMAT_XRGB8888: |
| sprctl |= SP_FORMAT_BGRX8888; |
| break; |
| case DRM_FORMAT_ARGB8888: |
| sprctl |= SP_FORMAT_BGRA8888; |
| break; |
| case DRM_FORMAT_XBGR2101010: |
| sprctl |= SP_FORMAT_RGBX1010102; |
| break; |
| case DRM_FORMAT_ABGR2101010: |
| sprctl |= SP_FORMAT_RGBA1010102; |
| break; |
| case DRM_FORMAT_XBGR8888: |
| sprctl |= SP_FORMAT_RGBX8888; |
| break; |
| case DRM_FORMAT_ABGR8888: |
| sprctl |= SP_FORMAT_RGBA8888; |
| break; |
| default: |
| /* |
| * If we get here one of the upper layers failed to filter |
| * out the unsupported plane formats |
| */ |
| BUG(); |
| break; |
| } |
| |
| /* |
| * Enable gamma to match primary/cursor plane behaviour. |
| * FIXME should be user controllable via propertiesa. |
| */ |
| sprctl |= SP_GAMMA_ENABLE; |
| |
| if (obj->tiling_mode != I915_TILING_NONE) |
| sprctl |= SP_TILED; |
| |
| sprctl |= SP_ENABLE; |
| |
| intel_update_sprite_watermarks(dplane, crtc, src_w, pixel_size, true, |
| src_w != crtc_w || src_h != crtc_h); |
| |
| /* Sizes are 0 based */ |
| src_w--; |
| src_h--; |
| crtc_w--; |
| crtc_h--; |
| |
| linear_offset = y * fb->pitches[0] + x * pixel_size; |
| sprsurf_offset = intel_gen4_compute_page_offset(&x, &y, |
| obj->tiling_mode, |
| pixel_size, |
| fb->pitches[0]); |
| linear_offset -= sprsurf_offset; |
| |
| atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); |
| |
| intel_update_primary_plane(intel_crtc); |
| |
| I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]); |
| I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x); |
| |
| if (obj->tiling_mode != I915_TILING_NONE) |
| I915_WRITE(SPTILEOFF(pipe, plane), (y << 16) | x); |
| else |
| I915_WRITE(SPLINOFF(pipe, plane), linear_offset); |
| |
| I915_WRITE(SPSIZE(pipe, plane), (crtc_h << 16) | crtc_w); |
| I915_WRITE(SPCNTR(pipe, plane), sprctl); |
| I915_WRITE(SPSURF(pipe, plane), i915_gem_obj_ggtt_offset(obj) + |
| sprsurf_offset); |
| |
| intel_flush_primary_plane(dev_priv, intel_crtc->plane); |
| |
| if (atomic_update) |
| intel_pipe_update_end(intel_crtc, start_vbl_count); |
| } |
| |
| static void |
| vlv_disable_plane(struct drm_plane *dplane, struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = dplane->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_plane *intel_plane = to_intel_plane(dplane); |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| int pipe = intel_plane->pipe; |
| int plane = intel_plane->plane; |
| u32 start_vbl_count; |
| bool atomic_update; |
| |
| atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); |
| |
| intel_update_primary_plane(intel_crtc); |
| |
| I915_WRITE(SPCNTR(pipe, plane), I915_READ(SPCNTR(pipe, plane)) & |
| ~SP_ENABLE); |
| /* Activate double buffered register update */ |
| I915_WRITE(SPSURF(pipe, plane), 0); |
| |
| intel_flush_primary_plane(dev_priv, intel_crtc->plane); |
| |
| if (atomic_update) |
| intel_pipe_update_end(intel_crtc, start_vbl_count); |
| |
| intel_update_sprite_watermarks(dplane, crtc, 0, 0, false, false); |
| } |
| |
| static int |
| vlv_update_colorkey(struct drm_plane *dplane, |
| struct drm_intel_sprite_colorkey *key) |
| { |
| struct drm_device *dev = dplane->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_plane *intel_plane = to_intel_plane(dplane); |
| int pipe = intel_plane->pipe; |
| int plane = intel_plane->plane; |
| u32 sprctl; |
| |
| if (key->flags & I915_SET_COLORKEY_DESTINATION) |
| return -EINVAL; |
| |
| I915_WRITE(SPKEYMINVAL(pipe, plane), key->min_value); |
| I915_WRITE(SPKEYMAXVAL(pipe, plane), key->max_value); |
| I915_WRITE(SPKEYMSK(pipe, plane), key->channel_mask); |
| |
| sprctl = I915_READ(SPCNTR(pipe, plane)); |
| sprctl &= ~SP_SOURCE_KEY; |
| if (key->flags & I915_SET_COLORKEY_SOURCE) |
| sprctl |= SP_SOURCE_KEY; |
| I915_WRITE(SPCNTR(pipe, plane), sprctl); |
| |
| POSTING_READ(SPKEYMSK(pipe, plane)); |
| |
| return 0; |
| } |
| |
| static void |
| vlv_get_colorkey(struct drm_plane *dplane, |
| struct drm_intel_sprite_colorkey *key) |
| { |
| struct drm_device *dev = dplane->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_plane *intel_plane = to_intel_plane(dplane); |
| int pipe = intel_plane->pipe; |
| int plane = intel_plane->plane; |
| u32 sprctl; |
| |
| key->min_value = I915_READ(SPKEYMINVAL(pipe, plane)); |
| key->max_value = I915_READ(SPKEYMAXVAL(pipe, plane)); |
| key->channel_mask = I915_READ(SPKEYMSK(pipe, plane)); |
| |
| sprctl = I915_READ(SPCNTR(pipe, plane)); |
| if (sprctl & SP_SOURCE_KEY) |
| key->flags = I915_SET_COLORKEY_SOURCE; |
| else |
| key->flags = I915_SET_COLORKEY_NONE; |
| } |
| |
| static void |
| ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, |
| struct drm_framebuffer *fb, |
| struct drm_i915_gem_object *obj, int crtc_x, int crtc_y, |
| unsigned int crtc_w, unsigned int crtc_h, |
| uint32_t x, uint32_t y, |
| uint32_t src_w, uint32_t src_h) |
| { |
| struct drm_device *dev = plane->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_plane *intel_plane = to_intel_plane(plane); |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| int pipe = intel_plane->pipe; |
| u32 sprctl, sprscale = 0; |
| unsigned long sprsurf_offset, linear_offset; |
| int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0); |
| u32 start_vbl_count; |
| bool atomic_update; |
| |
| sprctl = I915_READ(SPRCTL(pipe)); |
| |
| /* Mask out pixel format bits in case we change it */ |
| sprctl &= ~SPRITE_PIXFORMAT_MASK; |
| sprctl &= ~SPRITE_RGB_ORDER_RGBX; |
| sprctl &= ~SPRITE_YUV_BYTE_ORDER_MASK; |
| sprctl &= ~SPRITE_TILED; |
| |
| switch (fb->pixel_format) { |
| case DRM_FORMAT_XBGR8888: |
| sprctl |= SPRITE_FORMAT_RGBX888 | SPRITE_RGB_ORDER_RGBX; |
| break; |
| case DRM_FORMAT_XRGB8888: |
| sprctl |= SPRITE_FORMAT_RGBX888; |
| break; |
| case DRM_FORMAT_YUYV: |
| sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_YUYV; |
| break; |
| case DRM_FORMAT_YVYU: |
| sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_YVYU; |
| break; |
| case DRM_FORMAT_UYVY: |
| sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_UYVY; |
| break; |
| case DRM_FORMAT_VYUY: |
| sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_VYUY; |
| break; |
| default: |
| BUG(); |
| } |
| |
| /* |
| * Enable gamma to match primary/cursor plane behaviour. |
| * FIXME should be user controllable via propertiesa. |
| */ |
| sprctl |= SPRITE_GAMMA_ENABLE; |
| |
| if (obj->tiling_mode != I915_TILING_NONE) |
| sprctl |= SPRITE_TILED; |
| |
| if (IS_HASWELL(dev) || IS_BROADWELL(dev)) |
| sprctl &= ~SPRITE_TRICKLE_FEED_DISABLE; |
| else |
| sprctl |= SPRITE_TRICKLE_FEED_DISABLE; |
| |
| sprctl |= SPRITE_ENABLE; |
| |
| if (IS_HASWELL(dev) || IS_BROADWELL(dev)) |
| sprctl |= SPRITE_PIPE_CSC_ENABLE; |
| |
| intel_update_sprite_watermarks(plane, crtc, src_w, pixel_size, true, |
| src_w != crtc_w || src_h != crtc_h); |
| |
| /* Sizes are 0 based */ |
| src_w--; |
| src_h--; |
| crtc_w--; |
| crtc_h--; |
| |
| if (crtc_w != src_w || crtc_h != src_h) |
| sprscale = SPRITE_SCALE_ENABLE | (src_w << 16) | src_h; |
| |
| linear_offset = y * fb->pitches[0] + x * pixel_size; |
| sprsurf_offset = |
| intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode, |
| pixel_size, fb->pitches[0]); |
| linear_offset -= sprsurf_offset; |
| |
| atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); |
| |
| intel_update_primary_plane(intel_crtc); |
| |
| I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]); |
| I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x); |
| |
| /* HSW consolidates SPRTILEOFF and SPRLINOFF into a single SPROFFSET |
| * register */ |
| if (IS_HASWELL(dev) || IS_BROADWELL(dev)) |
| I915_WRITE(SPROFFSET(pipe), (y << 16) | x); |
| else if (obj->tiling_mode != I915_TILING_NONE) |
| I915_WRITE(SPRTILEOFF(pipe), (y << 16) | x); |
| else |
| I915_WRITE(SPRLINOFF(pipe), linear_offset); |
| |
| I915_WRITE(SPRSIZE(pipe), (crtc_h << 16) | crtc_w); |
| if (intel_plane->can_scale) |
| I915_WRITE(SPRSCALE(pipe), sprscale); |
| I915_WRITE(SPRCTL(pipe), sprctl); |
| I915_WRITE(SPRSURF(pipe), |
| i915_gem_obj_ggtt_offset(obj) + sprsurf_offset); |
| |
| intel_flush_primary_plane(dev_priv, intel_crtc->plane); |
| |
| if (atomic_update) |
| intel_pipe_update_end(intel_crtc, start_vbl_count); |
| } |
| |
| static void |
| ivb_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = plane->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_plane *intel_plane = to_intel_plane(plane); |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| int pipe = intel_plane->pipe; |
| u32 start_vbl_count; |
| bool atomic_update; |
| |
| atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); |
| |
| intel_update_primary_plane(intel_crtc); |
| |
| I915_WRITE(SPRCTL(pipe), I915_READ(SPRCTL(pipe)) & ~SPRITE_ENABLE); |
| /* Can't leave the scaler enabled... */ |
| if (intel_plane->can_scale) |
| I915_WRITE(SPRSCALE(pipe), 0); |
| /* Activate double buffered register update */ |
| I915_WRITE(SPRSURF(pipe), 0); |
| |
| intel_flush_primary_plane(dev_priv, intel_crtc->plane); |
| |
| if (atomic_update) |
| intel_pipe_update_end(intel_crtc, start_vbl_count); |
| |
| /* |
| * Avoid underruns when disabling the sprite. |
| * FIXME remove once watermark updates are done properly. |
| */ |
| intel_wait_for_vblank(dev, pipe); |
| |
| intel_update_sprite_watermarks(plane, crtc, 0, 0, false, false); |
| } |
| |
| static int |
| ivb_update_colorkey(struct drm_plane *plane, |
| struct drm_intel_sprite_colorkey *key) |
| { |
| struct drm_device *dev = plane->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_plane *intel_plane; |
| u32 sprctl; |
| int ret = 0; |
| |
| intel_plane = to_intel_plane(plane); |
| |
| I915_WRITE(SPRKEYVAL(intel_plane->pipe), key->min_value); |
| I915_WRITE(SPRKEYMAX(intel_plane->pipe), key->max_value); |
| I915_WRITE(SPRKEYMSK(intel_plane->pipe), key->channel_mask); |
| |
| sprctl = I915_READ(SPRCTL(intel_plane->pipe)); |
| sprctl &= ~(SPRITE_SOURCE_KEY | SPRITE_DEST_KEY); |
| if (key->flags & I915_SET_COLORKEY_DESTINATION) |
| sprctl |= SPRITE_DEST_KEY; |
| else if (key->flags & I915_SET_COLORKEY_SOURCE) |
| sprctl |= SPRITE_SOURCE_KEY; |
| I915_WRITE(SPRCTL(intel_plane->pipe), sprctl); |
| |
| POSTING_READ(SPRKEYMSK(intel_plane->pipe)); |
| |
| return ret; |
| } |
| |
| static void |
| ivb_get_colorkey(struct drm_plane *plane, struct drm_intel_sprite_colorkey *key) |
| { |
| struct drm_device *dev = plane->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_plane *intel_plane; |
| u32 sprctl; |
| |
| intel_plane = to_intel_plane(plane); |
| |
| key->min_value = I915_READ(SPRKEYVAL(intel_plane->pipe)); |
| key->max_value = I915_READ(SPRKEYMAX(intel_plane->pipe)); |
| key->channel_mask = I915_READ(SPRKEYMSK(intel_plane->pipe)); |
| key->flags = 0; |
| |
| sprctl = I915_READ(SPRCTL(intel_plane->pipe)); |
| |
| if (sprctl & SPRITE_DEST_KEY) |
| key->flags = I915_SET_COLORKEY_DESTINATION; |
| else if (sprctl & SPRITE_SOURCE_KEY) |
| key->flags = I915_SET_COLORKEY_SOURCE; |
| else |
| key->flags = I915_SET_COLORKEY_NONE; |
| } |
| |
| static void |
| ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, |
| struct drm_framebuffer *fb, |
| struct drm_i915_gem_object *obj, int crtc_x, int crtc_y, |
| unsigned int crtc_w, unsigned int crtc_h, |
| uint32_t x, uint32_t y, |
| uint32_t src_w, uint32_t src_h) |
| { |
| struct drm_device *dev = plane->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_plane *intel_plane = to_intel_plane(plane); |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| int pipe = intel_plane->pipe; |
| unsigned long dvssurf_offset, linear_offset; |
| u32 dvscntr, dvsscale; |
| int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0); |
| u32 start_vbl_count; |
| bool atomic_update; |
| |
| dvscntr = I915_READ(DVSCNTR(pipe)); |
| |
| /* Mask out pixel format bits in case we change it */ |
| dvscntr &= ~DVS_PIXFORMAT_MASK; |
| dvscntr &= ~DVS_RGB_ORDER_XBGR; |
| dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK; |
| dvscntr &= ~DVS_TILED; |
| |
| switch (fb->pixel_format) { |
| case DRM_FORMAT_XBGR8888: |
| dvscntr |= DVS_FORMAT_RGBX888 | DVS_RGB_ORDER_XBGR; |
| break; |
| case DRM_FORMAT_XRGB8888: |
| dvscntr |= DVS_FORMAT_RGBX888; |
| break; |
| case DRM_FORMAT_YUYV: |
| dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_YUYV; |
| break; |
| case DRM_FORMAT_YVYU: |
| dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_YVYU; |
| break; |
| case DRM_FORMAT_UYVY: |
| dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_UYVY; |
| break; |
| case DRM_FORMAT_VYUY: |
| dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_VYUY; |
| break; |
| default: |
| BUG(); |
| } |
| |
| /* |
| * Enable gamma to match primary/cursor plane behaviour. |
| * FIXME should be user controllable via propertiesa. |
| */ |
| dvscntr |= DVS_GAMMA_ENABLE; |
| |
| if (obj->tiling_mode != I915_TILING_NONE) |
| dvscntr |= DVS_TILED; |
| |
| if (IS_GEN6(dev)) |
| dvscntr |= DVS_TRICKLE_FEED_DISABLE; /* must disable */ |
| dvscntr |= DVS_ENABLE; |
| |
| intel_update_sprite_watermarks(plane, crtc, src_w, pixel_size, true, |
| src_w != crtc_w || src_h != crtc_h); |
| |
| /* Sizes are 0 based */ |
| src_w--; |
| src_h--; |
| crtc_w--; |
| crtc_h--; |
| |
| dvsscale = 0; |
| if (crtc_w != src_w || crtc_h != src_h) |
| dvsscale = DVS_SCALE_ENABLE | (src_w << 16) | src_h; |
| |
| linear_offset = y * fb->pitches[0] + x * pixel_size; |
| dvssurf_offset = |
| intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode, |
| pixel_size, fb->pitches[0]); |
| linear_offset -= dvssurf_offset; |
| |
| atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); |
| |
| intel_update_primary_plane(intel_crtc); |
| |
| I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]); |
| I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x); |
| |
| if (obj->tiling_mode != I915_TILING_NONE) |
| I915_WRITE(DVSTILEOFF(pipe), (y << 16) | x); |
| else |
| I915_WRITE(DVSLINOFF(pipe), linear_offset); |
| |
| I915_WRITE(DVSSIZE(pipe), (crtc_h << 16) | crtc_w); |
| I915_WRITE(DVSSCALE(pipe), dvsscale); |
| I915_WRITE(DVSCNTR(pipe), dvscntr); |
| I915_WRITE(DVSSURF(pipe), |
| i915_gem_obj_ggtt_offset(obj) + dvssurf_offset); |
| |
| intel_flush_primary_plane(dev_priv, intel_crtc->plane); |
| |
| if (atomic_update) |
| intel_pipe_update_end(intel_crtc, start_vbl_count); |
| } |
| |
| static void |
| ilk_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = plane->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_plane *intel_plane = to_intel_plane(plane); |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| int pipe = intel_plane->pipe; |
| u32 start_vbl_count; |
| bool atomic_update; |
| |
| atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); |
| |
| intel_update_primary_plane(intel_crtc); |
| |
| I915_WRITE(DVSCNTR(pipe), I915_READ(DVSCNTR(pipe)) & ~DVS_ENABLE); |
| /* Disable the scaler */ |
| I915_WRITE(DVSSCALE(pipe), 0); |
| /* Flush double buffered register updates */ |
| I915_WRITE(DVSSURF(pipe), 0); |
| |
| intel_flush_primary_plane(dev_priv, intel_crtc->plane); |
| |
| if (atomic_update) |
| intel_pipe_update_end(intel_crtc, start_vbl_count); |
| |
| /* |
| * Avoid underruns when disabling the sprite. |
| * FIXME remove once watermark updates are done properly. |
| */ |
| intel_wait_for_vblank(dev, pipe); |
| |
| intel_update_sprite_watermarks(plane, crtc, 0, 0, false, false); |
| } |
| |
| static void |
| intel_post_enable_primary(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| |
| /* |
| * FIXME IPS should be fine as long as one plane is |
| * enabled, but in practice it seems to have problems |
| * when going from primary only to sprite only and vice |
| * versa. |
| */ |
| if (intel_crtc->config.ips_enabled) { |
| intel_wait_for_vblank(dev, intel_crtc->pipe); |
| hsw_enable_ips(intel_crtc); |
| } |
| |
| mutex_lock(&dev->struct_mutex); |
| intel_update_fbc(dev); |
| mutex_unlock(&dev->struct_mutex); |
| } |
| |
| static void |
| intel_pre_disable_primary(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| |
| mutex_lock(&dev->struct_mutex); |
| if (dev_priv->fbc.plane == intel_crtc->plane) |
| intel_disable_fbc(dev); |
| mutex_unlock(&dev->struct_mutex); |
| |
| /* |
| * FIXME IPS should be fine as long as one plane is |
| * enabled, but in practice it seems to have problems |
| * when going from primary only to sprite only and vice |
| * versa. |
| */ |
| hsw_disable_ips(intel_crtc); |
| } |
| |
| static int |
| ilk_update_colorkey(struct drm_plane *plane, |
| struct drm_intel_sprite_colorkey *key) |
| { |
| struct drm_device *dev = plane->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_plane *intel_plane; |
| u32 dvscntr; |
| int ret = 0; |
| |
| intel_plane = to_intel_plane(plane); |
| |
| I915_WRITE(DVSKEYVAL(intel_plane->pipe), key->min_value); |
| I915_WRITE(DVSKEYMAX(intel_plane->pipe), key->max_value); |
| I915_WRITE(DVSKEYMSK(intel_plane->pipe), key->channel_mask); |
| |
| dvscntr = I915_READ(DVSCNTR(intel_plane->pipe)); |
| dvscntr &= ~(DVS_SOURCE_KEY | DVS_DEST_KEY); |
| if (key->flags & I915_SET_COLORKEY_DESTINATION) |
| dvscntr |= DVS_DEST_KEY; |
| else if (key->flags & I915_SET_COLORKEY_SOURCE) |
| dvscntr |= DVS_SOURCE_KEY; |
| I915_WRITE(DVSCNTR(intel_plane->pipe), dvscntr); |
| |
| POSTING_READ(DVSKEYMSK(intel_plane->pipe)); |
| |
| return ret; |
| } |
| |
| static void |
| ilk_get_colorkey(struct drm_plane *plane, struct drm_intel_sprite_colorkey *key) |
| { |
| struct drm_device *dev = plane->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_plane *intel_plane; |
| u32 dvscntr; |
| |
| intel_plane = to_intel_plane(plane); |
| |
| key->min_value = I915_READ(DVSKEYVAL(intel_plane->pipe)); |
| key->max_value = I915_READ(DVSKEYMAX(intel_plane->pipe)); |
| key->channel_mask = I915_READ(DVSKEYMSK(intel_plane->pipe)); |
| key->flags = 0; |
| |
| dvscntr = I915_READ(DVSCNTR(intel_plane->pipe)); |
| |
| if (dvscntr & DVS_DEST_KEY) |
| key->flags = I915_SET_COLORKEY_DESTINATION; |
| else if (dvscntr & DVS_SOURCE_KEY) |
| key->flags = I915_SET_COLORKEY_SOURCE; |
| else |
| key->flags = I915_SET_COLORKEY_NONE; |
| } |
| |
| static bool |
| format_is_yuv(uint32_t format) |
| { |
| switch (format) { |
| case DRM_FORMAT_YUYV: |
| case DRM_FORMAT_UYVY: |
| case DRM_FORMAT_VYUY: |
| case DRM_FORMAT_YVYU: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool colorkey_enabled(struct intel_plane *intel_plane) |
| { |
| struct drm_intel_sprite_colorkey key; |
| |
| intel_plane->get_colorkey(&intel_plane->base, &key); |
| |
| return key.flags != I915_SET_COLORKEY_NONE; |
| } |
| |
| static int |
| intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, |
| struct drm_framebuffer *fb, int crtc_x, int crtc_y, |
| unsigned int crtc_w, unsigned int crtc_h, |
| uint32_t src_x, uint32_t src_y, |
| uint32_t src_w, uint32_t src_h) |
| { |
| struct drm_device *dev = plane->dev; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| struct intel_plane *intel_plane = to_intel_plane(plane); |
| struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); |
| struct drm_i915_gem_object *obj = intel_fb->obj; |
| struct drm_i915_gem_object *old_obj = intel_plane->obj; |
| int ret; |
| bool primary_enabled; |
| bool visible; |
| int hscale, vscale; |
| int max_scale, min_scale; |
| int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0); |
| struct drm_rect src = { |
| /* sample coordinates in 16.16 fixed point */ |
| .x1 = src_x, |
| .x2 = src_x + src_w, |
| .y1 = src_y, |
| .y2 = src_y + src_h, |
| }; |
| struct drm_rect dst = { |
| /* integer pixels */ |
| .x1 = crtc_x, |
| .x2 = crtc_x + crtc_w, |
| .y1 = crtc_y, |
| .y2 = crtc_y + crtc_h, |
| }; |
| const struct drm_rect clip = { |
| .x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0, |
| .y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0, |
| }; |
| const struct { |
| int crtc_x, crtc_y; |
| unsigned int crtc_w, crtc_h; |
| uint32_t src_x, src_y, src_w, src_h; |
| } orig = { |
| .crtc_x = crtc_x, |
| .crtc_y = crtc_y, |
| .crtc_w = crtc_w, |
| .crtc_h = crtc_h, |
| .src_x = src_x, |
| .src_y = src_y, |
| .src_w = src_w, |
| .src_h = src_h, |
| }; |
| |
| /* Don't modify another pipe's plane */ |
| if (intel_plane->pipe != intel_crtc->pipe) { |
| DRM_DEBUG_KMS("Wrong plane <-> crtc mapping\n"); |
| return -EINVAL; |
| } |
| |
| /* FIXME check all gen limits */ |
| if (fb->width < 3 || fb->height < 3 || fb->pitches[0] > 16384) { |
| DRM_DEBUG_KMS("Unsuitable framebuffer for plane\n"); |
| return -EINVAL; |
| } |
| |
| /* Sprite planes can be linear or x-tiled surfaces */ |
| switch (obj->tiling_mode) { |
| case I915_TILING_NONE: |
| case I915_TILING_X: |
| break; |
| default: |
| DRM_DEBUG_KMS("Unsupported tiling mode\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * FIXME the following code does a bunch of fuzzy adjustments to the |
| * coordinates and sizes. We probably need some way to decide whether |
| * more strict checking should be done instead. |
| */ |
| max_scale = intel_plane->max_downscale << 16; |
| min_scale = intel_plane->can_scale ? 1 : (1 << 16); |
| |
| hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale); |
| BUG_ON(hscale < 0); |
| |
| vscale = drm_rect_calc_vscale_relaxed(&src, &dst, min_scale, max_scale); |
| BUG_ON(vscale < 0); |
| |
| visible = drm_rect_clip_scaled(&src, &dst, &clip, hscale, vscale); |
| |
| crtc_x = dst.x1; |
| crtc_y = dst.y1; |
| crtc_w = drm_rect_width(&dst); |
| crtc_h = drm_rect_height(&dst); |
| |
| if (visible) { |
| /* check again in case clipping clamped the results */ |
| hscale = drm_rect_calc_hscale(&src, &dst, min_scale, max_scale); |
| if (hscale < 0) { |
| DRM_DEBUG_KMS("Horizontal scaling factor out of limits\n"); |
| drm_rect_debug_print(&src, true); |
| drm_rect_debug_print(&dst, false); |
| |
| return hscale; |
| } |
| |
| vscale = drm_rect_calc_vscale(&src, &dst, min_scale, max_scale); |
| if (vscale < 0) { |
| DRM_DEBUG_KMS("Vertical scaling factor out of limits\n"); |
| drm_rect_debug_print(&src, true); |
| drm_rect_debug_print(&dst, false); |
| |
| return vscale; |
| } |
| |
| /* Make the source viewport size an exact multiple of the scaling factors. */ |
| drm_rect_adjust_size(&src, |
| drm_rect_width(&dst) * hscale - drm_rect_width(&src), |
| drm_rect_height(&dst) * vscale - drm_rect_height(&src)); |
| |
| /* sanity check to make sure the src viewport wasn't enlarged */ |
| WARN_ON(src.x1 < (int) src_x || |
| src.y1 < (int) src_y || |
| src.x2 > (int) (src_x + src_w) || |
| src.y2 > (int) (src_y + src_h)); |
| |
| /* |
| * Hardware doesn't handle subpixel coordinates. |
| * Adjust to (macro)pixel boundary, but be careful not to |
| * increase the source viewport size, because that could |
| * push the downscaling factor out of bounds. |
| */ |
| src_x = src.x1 >> 16; |
| src_w = drm_rect_width(&src) >> 16; |
| src_y = src.y1 >> 16; |
| src_h = drm_rect_height(&src) >> 16; |
| |
| if (format_is_yuv(fb->pixel_format)) { |
| src_x &= ~1; |
| src_w &= ~1; |
| |
| /* |
| * Must keep src and dst the |
| * same if we can't scale. |
| */ |
| if (!intel_plane->can_scale) |
| crtc_w &= ~1; |
| |
| if (crtc_w == 0) |
| visible = false; |
| } |
| } |
| |
| /* Check size restrictions when scaling */ |
| if (visible && (src_w != crtc_w || src_h != crtc_h)) { |
| unsigned int width_bytes; |
| |
| WARN_ON(!intel_plane->can_scale); |
| |
| /* FIXME interlacing min height is 6 */ |
| |
| if (crtc_w < 3 || crtc_h < 3) |
| visible = false; |
| |
| if (src_w < 3 || src_h < 3) |
| visible = false; |
| |
| width_bytes = ((src_x * pixel_size) & 63) + src_w * pixel_size; |
| |
| if (src_w > 2048 || src_h > 2048 || |
| width_bytes > 4096 || fb->pitches[0] > 4096) { |
| DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n"); |
| return -EINVAL; |
| } |
| } |
| |
| dst.x1 = crtc_x; |
| dst.x2 = crtc_x + crtc_w; |
| dst.y1 = crtc_y; |
| dst.y2 = crtc_y + crtc_h; |
| |
| /* |
| * If the sprite is completely covering the primary plane, |
| * we can disable the primary and save power. |
| */ |
| primary_enabled = !drm_rect_equals(&dst, &clip) || colorkey_enabled(intel_plane); |
| WARN_ON(!primary_enabled && !visible && intel_crtc->active); |
| |
| mutex_lock(&dev->struct_mutex); |
| |
| /* Note that this will apply the VT-d workaround for scanouts, |
| * which is more restrictive than required for sprites. (The |
| * primary plane requires 256KiB alignment with 64 PTE padding, |
| * the sprite planes only require 128KiB alignment and 32 PTE padding. |
| */ |
| ret = intel_pin_and_fence_fb_obj(dev, obj, NULL); |
| |
| mutex_unlock(&dev->struct_mutex); |
| |
| if (ret) |
| return ret; |
| |
| intel_plane->crtc_x = orig.crtc_x; |
| intel_plane->crtc_y = orig.crtc_y; |
| intel_plane->crtc_w = orig.crtc_w; |
| intel_plane->crtc_h = orig.crtc_h; |
| intel_plane->src_x = orig.src_x; |
| intel_plane->src_y = orig.src_y; |
| intel_plane->src_w = orig.src_w; |
| intel_plane->src_h = orig.src_h; |
| intel_plane->obj = obj; |
| |
| if (intel_crtc->active) { |
| bool primary_was_enabled = intel_crtc->primary_enabled; |
| |
| intel_crtc->primary_enabled = primary_enabled; |
| |
| if (primary_was_enabled && !primary_enabled) |
| intel_pre_disable_primary(crtc); |
| |
| if (visible) |
| intel_plane->update_plane(plane, crtc, fb, obj, |
| crtc_x, crtc_y, crtc_w, crtc_h, |
| src_x, src_y, src_w, src_h); |
| else |
| intel_plane->disable_plane(plane, crtc); |
| |
| if (!primary_was_enabled && primary_enabled) |
| intel_post_enable_primary(crtc); |
| } |
| |
| /* Unpin old obj after new one is active to avoid ugliness */ |
| if (old_obj) { |
| /* |
| * It's fairly common to simply update the position of |
| * an existing object. In that case, we don't need to |
| * wait for vblank to avoid ugliness, we only need to |
| * do the pin & ref bookkeeping. |
| */ |
| if (old_obj != obj && intel_crtc->active) |
| intel_wait_for_vblank(dev, intel_crtc->pipe); |
| |
| mutex_lock(&dev->struct_mutex); |
| intel_unpin_fb_obj(old_obj); |
| mutex_unlock(&dev->struct_mutex); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| intel_disable_plane(struct drm_plane *plane) |
| { |
| struct drm_device *dev = plane->dev; |
| struct intel_plane *intel_plane = to_intel_plane(plane); |
| struct intel_crtc *intel_crtc; |
| |
| if (!plane->fb) |
| return 0; |
| |
| if (WARN_ON(!plane->crtc)) |
| return -EINVAL; |
| |
| intel_crtc = to_intel_crtc(plane->crtc); |
| |
| if (intel_crtc->active) { |
| bool primary_was_enabled = intel_crtc->primary_enabled; |
| |
| intel_crtc->primary_enabled = true; |
| |
| intel_plane->disable_plane(plane, plane->crtc); |
| |
| if (!primary_was_enabled && intel_crtc->primary_enabled) |
| intel_post_enable_primary(plane->crtc); |
| } |
| |
| if (intel_plane->obj) { |
| if (intel_crtc->active) |
| intel_wait_for_vblank(dev, intel_plane->pipe); |
| |
| mutex_lock(&dev->struct_mutex); |
| intel_unpin_fb_obj(intel_plane->obj); |
| mutex_unlock(&dev->struct_mutex); |
| |
| intel_plane->obj = NULL; |
| } |
| |
| return 0; |
| } |
| |
| static void intel_destroy_plane(struct drm_plane *plane) |
| { |
| struct intel_plane *intel_plane = to_intel_plane(plane); |
| intel_disable_plane(plane); |
| drm_plane_cleanup(plane); |
| kfree(intel_plane); |
| } |
| |
| int intel_sprite_set_colorkey(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_intel_sprite_colorkey *set = data; |
| struct drm_mode_object *obj; |
| struct drm_plane *plane; |
| struct intel_plane *intel_plane; |
| int ret = 0; |
| |
| if (!drm_core_check_feature(dev, DRIVER_MODESET)) |
| return -ENODEV; |
| |
| /* Make sure we don't try to enable both src & dest simultaneously */ |
| if ((set->flags & (I915_SET_COLORKEY_DESTINATION | I915_SET_COLORKEY_SOURCE)) == (I915_SET_COLORKEY_DESTINATION | I915_SET_COLORKEY_SOURCE)) |
| return -EINVAL; |
| |
| drm_modeset_lock_all(dev); |
| |
| obj = drm_mode_object_find(dev, set->plane_id, DRM_MODE_OBJECT_PLANE); |
| if (!obj) { |
| ret = -ENOENT; |
| goto out_unlock; |
| } |
| |
| plane = obj_to_plane(obj); |
| intel_plane = to_intel_plane(plane); |
| ret = intel_plane->update_colorkey(plane, set); |
| |
| out_unlock: |
| drm_modeset_unlock_all(dev); |
| return ret; |
| } |
| |
| int intel_sprite_get_colorkey(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_intel_sprite_colorkey *get = data; |
| struct drm_mode_object *obj; |
| struct drm_plane *plane; |
| struct intel_plane *intel_plane; |
| int ret = 0; |
| |
| if (!drm_core_check_feature(dev, DRIVER_MODESET)) |
| return -ENODEV; |
| |
| drm_modeset_lock_all(dev); |
| |
| obj = drm_mode_object_find(dev, get->plane_id, DRM_MODE_OBJECT_PLANE); |
| if (!obj) { |
| ret = -ENOENT; |
| goto out_unlock; |
| } |
| |
| plane = obj_to_plane(obj); |
| intel_plane = to_intel_plane(plane); |
| intel_plane->get_colorkey(plane, get); |
| |
| out_unlock: |
| drm_modeset_unlock_all(dev); |
| return ret; |
| } |
| |
| void intel_plane_restore(struct drm_plane *plane) |
| { |
| struct intel_plane *intel_plane = to_intel_plane(plane); |
| |
| if (!plane->crtc || !plane->fb) |
| return; |
| |
| intel_update_plane(plane, plane->crtc, plane->fb, |
| intel_plane->crtc_x, intel_plane->crtc_y, |
| intel_plane->crtc_w, intel_plane->crtc_h, |
| intel_plane->src_x, intel_plane->src_y, |
| intel_plane->src_w, intel_plane->src_h); |
| } |
| |
| void intel_plane_disable(struct drm_plane *plane) |
| { |
| if (!plane->crtc || !plane->fb) |
| return; |
| |
| intel_disable_plane(plane); |
| } |
| |
| static const struct drm_plane_funcs intel_plane_funcs = { |
| .update_plane = intel_update_plane, |
| .disable_plane = intel_disable_plane, |
| .destroy = intel_destroy_plane, |
| }; |
| |
| static uint32_t ilk_plane_formats[] = { |
| DRM_FORMAT_XRGB8888, |
| DRM_FORMAT_YUYV, |
| DRM_FORMAT_YVYU, |
| DRM_FORMAT_UYVY, |
| DRM_FORMAT_VYUY, |
| }; |
| |
| static uint32_t snb_plane_formats[] = { |
| DRM_FORMAT_XBGR8888, |
| DRM_FORMAT_XRGB8888, |
| DRM_FORMAT_YUYV, |
| DRM_FORMAT_YVYU, |
| DRM_FORMAT_UYVY, |
| DRM_FORMAT_VYUY, |
| }; |
| |
| static uint32_t vlv_plane_formats[] = { |
| DRM_FORMAT_RGB565, |
| DRM_FORMAT_ABGR8888, |
| DRM_FORMAT_ARGB8888, |
| DRM_FORMAT_XBGR8888, |
| DRM_FORMAT_XRGB8888, |
| DRM_FORMAT_XBGR2101010, |
| DRM_FORMAT_ABGR2101010, |
| DRM_FORMAT_YUYV, |
| DRM_FORMAT_YVYU, |
| DRM_FORMAT_UYVY, |
| DRM_FORMAT_VYUY, |
| }; |
| |
| int |
| intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane) |
| { |
| struct intel_plane *intel_plane; |
| unsigned long possible_crtcs; |
| const uint32_t *plane_formats; |
| int num_plane_formats; |
| int ret; |
| |
| if (INTEL_INFO(dev)->gen < 5) |
| return -ENODEV; |
| |
| intel_plane = kzalloc(sizeof(*intel_plane), GFP_KERNEL); |
| if (!intel_plane) |
| return -ENOMEM; |
| |
| switch (INTEL_INFO(dev)->gen) { |
| case 5: |
| case 6: |
| intel_plane->can_scale = true; |
| intel_plane->max_downscale = 16; |
| intel_plane->update_plane = ilk_update_plane; |
| intel_plane->disable_plane = ilk_disable_plane; |
| intel_plane->update_colorkey = ilk_update_colorkey; |
| intel_plane->get_colorkey = ilk_get_colorkey; |
| |
| if (IS_GEN6(dev)) { |
| plane_formats = snb_plane_formats; |
| num_plane_formats = ARRAY_SIZE(snb_plane_formats); |
| } else { |
| plane_formats = ilk_plane_formats; |
| num_plane_formats = ARRAY_SIZE(ilk_plane_formats); |
| } |
| break; |
| |
| case 7: |
| case 8: |
| if (IS_IVYBRIDGE(dev)) { |
| intel_plane->can_scale = true; |
| intel_plane->max_downscale = 2; |
| } else { |
| intel_plane->can_scale = false; |
| intel_plane->max_downscale = 1; |
| } |
| |
| if (IS_VALLEYVIEW(dev)) { |
| intel_plane->update_plane = vlv_update_plane; |
| intel_plane->disable_plane = vlv_disable_plane; |
| intel_plane->update_colorkey = vlv_update_colorkey; |
| intel_plane->get_colorkey = vlv_get_colorkey; |
| |
| plane_formats = vlv_plane_formats; |
| num_plane_formats = ARRAY_SIZE(vlv_plane_formats); |
| } else { |
| intel_plane->update_plane = ivb_update_plane; |
| intel_plane->disable_plane = ivb_disable_plane; |
| intel_plane->update_colorkey = ivb_update_colorkey; |
| intel_plane->get_colorkey = ivb_get_colorkey; |
| |
| plane_formats = snb_plane_formats; |
| num_plane_formats = ARRAY_SIZE(snb_plane_formats); |
| } |
| break; |
| |
| default: |
| kfree(intel_plane); |
| return -ENODEV; |
| } |
| |
| intel_plane->pipe = pipe; |
| intel_plane->plane = plane; |
| possible_crtcs = (1 << pipe); |
| ret = drm_plane_init(dev, &intel_plane->base, possible_crtcs, |
| &intel_plane_funcs, |
| plane_formats, num_plane_formats, |
| false); |
| if (ret) |
| kfree(intel_plane); |
| |
| return ret; |
| } |