| /* |
| * G4EVM board support |
| * |
| * Copyright (C) 2010 Magnus Damm |
| * Copyright (C) 2008 Yoshihiro Shimoda |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/mtd/physmap.h> |
| #include <linux/usb/r8a66597.h> |
| #include <linux/io.h> |
| #include <linux/input.h> |
| #include <linux/input/sh_keysc.h> |
| #include <linux/mfd/sh_mobile_sdhi.h> |
| #include <linux/gpio.h> |
| #include <mach/sh7377.h> |
| #include <mach/common.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/time.h> |
| |
| /* |
| * SDHI |
| * |
| * SDHI0 : card detection is possible |
| * SDHI1 : card detection is impossible |
| * |
| * [G4-MAIN-BOARD] |
| * JP74 : short # DBG_2V8A for SDHI0 |
| * JP75 : NC # DBG_3V3A for SDHI0 |
| * JP76 : NC # DBG_3V3A_SD for SDHI0 |
| * JP77 : NC # 3V3A_SDIO for SDHI1 |
| * JP78 : short # DBG_2V8A for SDHI1 |
| * JP79 : NC # DBG_3V3A for SDHI1 |
| * JP80 : NC # DBG_3V3A_SD for SDHI1 |
| * |
| * [G4-CORE-BOARD] |
| * S32 : all off # to dissever from G3-CORE_DBG board |
| * S33 : all off # to dissever from G3-CORE_DBG board |
| * |
| * [G3-CORE_DBG-BOARD] |
| * S1 : all off # to dissever from G3-CORE_DBG board |
| * S3 : all off # to dissever from G3-CORE_DBG board |
| * S4 : all off # to dissever from G3-CORE_DBG board |
| */ |
| |
| static struct mtd_partition nor_flash_partitions[] = { |
| { |
| .name = "loader", |
| .offset = 0x00000000, |
| .size = 512 * 1024, |
| }, |
| { |
| .name = "bootenv", |
| .offset = MTDPART_OFS_APPEND, |
| .size = 512 * 1024, |
| }, |
| { |
| .name = "kernel_ro", |
| .offset = MTDPART_OFS_APPEND, |
| .size = 8 * 1024 * 1024, |
| .mask_flags = MTD_WRITEABLE, |
| }, |
| { |
| .name = "kernel", |
| .offset = MTDPART_OFS_APPEND, |
| .size = 8 * 1024 * 1024, |
| }, |
| { |
| .name = "data", |
| .offset = MTDPART_OFS_APPEND, |
| .size = MTDPART_SIZ_FULL, |
| }, |
| }; |
| |
| static struct physmap_flash_data nor_flash_data = { |
| .width = 2, |
| .parts = nor_flash_partitions, |
| .nr_parts = ARRAY_SIZE(nor_flash_partitions), |
| }; |
| |
| static struct resource nor_flash_resources[] = { |
| [0] = { |
| .start = 0x00000000, |
| .end = 0x08000000 - 1, |
| .flags = IORESOURCE_MEM, |
| } |
| }; |
| |
| static struct platform_device nor_flash_device = { |
| .name = "physmap-flash", |
| .dev = { |
| .platform_data = &nor_flash_data, |
| }, |
| .num_resources = ARRAY_SIZE(nor_flash_resources), |
| .resource = nor_flash_resources, |
| }; |
| |
| /* USBHS */ |
| static void usb_host_port_power(int port, int power) |
| { |
| if (!power) /* only power-on supported for now */ |
| return; |
| |
| /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */ |
| __raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008); |
| } |
| |
| static struct r8a66597_platdata usb_host_data = { |
| .on_chip = 1, |
| .port_power = usb_host_port_power, |
| }; |
| |
| static struct resource usb_host_resources[] = { |
| [0] = { |
| .name = "USBHS", |
| .start = 0xe6890000, |
| .end = 0xe68900e5, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0x0a20), /* USBHS_USHI0 */ |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device usb_host_device = { |
| .name = "r8a66597_hcd", |
| .id = 0, |
| .dev = { |
| .platform_data = &usb_host_data, |
| .dma_mask = NULL, |
| .coherent_dma_mask = 0xffffffff, |
| }, |
| .num_resources = ARRAY_SIZE(usb_host_resources), |
| .resource = usb_host_resources, |
| }; |
| |
| /* KEYSC */ |
| static struct sh_keysc_info keysc_info = { |
| .mode = SH_KEYSC_MODE_5, |
| .scan_timing = 3, |
| .delay = 100, |
| .keycodes = { |
| KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, |
| KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, |
| KEY_M, KEY_N, KEY_U, KEY_P, KEY_Q, KEY_R, |
| KEY_S, KEY_T, KEY_U, KEY_V, KEY_W, KEY_X, |
| KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, |
| KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, |
| KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER, |
| }, |
| }; |
| |
| static struct resource keysc_resources[] = { |
| [0] = { |
| .name = "KEYSC", |
| .start = 0xe61b0000, |
| .end = 0xe61b000f, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0x0be0), /* KEYSC_KEY */ |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device keysc_device = { |
| .name = "sh_keysc", |
| .id = 0, /* keysc0 clock */ |
| .num_resources = ARRAY_SIZE(keysc_resources), |
| .resource = keysc_resources, |
| .dev = { |
| .platform_data = &keysc_info, |
| }, |
| }; |
| |
| /* SDHI */ |
| static struct resource sdhi0_resources[] = { |
| [0] = { |
| .name = "SDHI0", |
| .start = 0xe6d50000, |
| .end = 0xe6d501ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0x0e00), /* SDHI0 */ |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device sdhi0_device = { |
| .name = "sh_mobile_sdhi", |
| .num_resources = ARRAY_SIZE(sdhi0_resources), |
| .resource = sdhi0_resources, |
| .id = 0, |
| }; |
| |
| static struct resource sdhi1_resources[] = { |
| [0] = { |
| .name = "SDHI1", |
| .start = 0xe6d60000, |
| .end = 0xe6d601ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0x0e80), /* SDHI1 */ |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device sdhi1_device = { |
| .name = "sh_mobile_sdhi", |
| .num_resources = ARRAY_SIZE(sdhi1_resources), |
| .resource = sdhi1_resources, |
| .id = 1, |
| }; |
| |
| static struct platform_device *g4evm_devices[] __initdata = { |
| &nor_flash_device, |
| &usb_host_device, |
| &keysc_device, |
| &sdhi0_device, |
| &sdhi1_device, |
| }; |
| |
| static struct map_desc g4evm_io_desc[] __initdata = { |
| /* create a 1:1 entity map for 0xe6xxxxxx |
| * used by CPGA, INTC and PFC. |
| */ |
| { |
| .virtual = 0xe6000000, |
| .pfn = __phys_to_pfn(0xe6000000), |
| .length = 256 << 20, |
| .type = MT_DEVICE_NONSHARED |
| }, |
| }; |
| |
| static void __init g4evm_map_io(void) |
| { |
| iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc)); |
| |
| /* setup early devices and console here as well */ |
| sh7377_add_early_devices(); |
| shmobile_setup_console(); |
| } |
| |
| #define GPIO_SDHID0_D0 0xe60520fc |
| #define GPIO_SDHID0_D1 0xe60520fd |
| #define GPIO_SDHID0_D2 0xe60520fe |
| #define GPIO_SDHID0_D3 0xe60520ff |
| #define GPIO_SDHICMD0 0xe6052100 |
| |
| #define GPIO_SDHID1_D0 0xe6052103 |
| #define GPIO_SDHID1_D1 0xe6052104 |
| #define GPIO_SDHID1_D2 0xe6052105 |
| #define GPIO_SDHID1_D3 0xe6052106 |
| #define GPIO_SDHICMD1 0xe6052107 |
| |
| /* |
| * FIXME !! |
| * |
| * gpio_pull_up is quick_hack. |
| * |
| * current gpio frame work doesn't have |
| * the method to control only pull up/down/free. |
| * this function should be replaced by correct gpio function |
| */ |
| static void __init gpio_pull_up(u32 addr) |
| { |
| u8 data = __raw_readb(addr); |
| |
| data &= 0x0F; |
| data |= 0xC0; |
| __raw_writeb(data, addr); |
| } |
| |
| static void __init g4evm_init(void) |
| { |
| sh7377_pinmux_init(); |
| |
| /* Lit DS14 LED */ |
| gpio_request(GPIO_PORT109, NULL); |
| gpio_direction_output(GPIO_PORT109, 1); |
| gpio_export(GPIO_PORT109, 1); |
| |
| /* Lit DS15 LED */ |
| gpio_request(GPIO_PORT110, NULL); |
| gpio_direction_output(GPIO_PORT110, 1); |
| gpio_export(GPIO_PORT110, 1); |
| |
| /* Lit DS16 LED */ |
| gpio_request(GPIO_PORT112, NULL); |
| gpio_direction_output(GPIO_PORT112, 1); |
| gpio_export(GPIO_PORT112, 1); |
| |
| /* Lit DS17 LED */ |
| gpio_request(GPIO_PORT113, NULL); |
| gpio_direction_output(GPIO_PORT113, 1); |
| gpio_export(GPIO_PORT113, 1); |
| |
| /* USBHS */ |
| gpio_request(GPIO_FN_VBUS_0, NULL); |
| gpio_request(GPIO_FN_PWEN, NULL); |
| gpio_request(GPIO_FN_OVCN, NULL); |
| gpio_request(GPIO_FN_OVCN2, NULL); |
| gpio_request(GPIO_FN_EXTLP, NULL); |
| gpio_request(GPIO_FN_IDIN, NULL); |
| |
| /* setup USB phy */ |
| __raw_writew(0x0200, 0xe605810a); /* USBCR1 */ |
| __raw_writew(0x00e0, 0xe60581c0); /* CPFCH */ |
| __raw_writew(0x6010, 0xe60581c6); /* CGPOSR */ |
| __raw_writew(0x8a0a, 0xe605810c); /* USBCR2 */ |
| |
| /* KEYSC @ CN31 */ |
| gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL); |
| gpio_request(GPIO_FN_PORT61_KEYOUT4, NULL); |
| gpio_request(GPIO_FN_PORT62_KEYOUT3, NULL); |
| gpio_request(GPIO_FN_PORT63_KEYOUT2, NULL); |
| gpio_request(GPIO_FN_PORT64_KEYOUT1, NULL); |
| gpio_request(GPIO_FN_PORT65_KEYOUT0, NULL); |
| gpio_request(GPIO_FN_PORT66_KEYIN0_PU, NULL); |
| gpio_request(GPIO_FN_PORT67_KEYIN1_PU, NULL); |
| gpio_request(GPIO_FN_PORT68_KEYIN2_PU, NULL); |
| gpio_request(GPIO_FN_PORT69_KEYIN3_PU, NULL); |
| gpio_request(GPIO_FN_PORT70_KEYIN4_PU, NULL); |
| gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL); |
| gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL); |
| |
| /* SDHI0 */ |
| gpio_request(GPIO_FN_SDHICLK0, NULL); |
| gpio_request(GPIO_FN_SDHICD0, NULL); |
| gpio_request(GPIO_FN_SDHID0_0, NULL); |
| gpio_request(GPIO_FN_SDHID0_1, NULL); |
| gpio_request(GPIO_FN_SDHID0_2, NULL); |
| gpio_request(GPIO_FN_SDHID0_3, NULL); |
| gpio_request(GPIO_FN_SDHICMD0, NULL); |
| gpio_request(GPIO_FN_SDHIWP0, NULL); |
| gpio_pull_up(GPIO_SDHID0_D0); |
| gpio_pull_up(GPIO_SDHID0_D1); |
| gpio_pull_up(GPIO_SDHID0_D2); |
| gpio_pull_up(GPIO_SDHID0_D3); |
| gpio_pull_up(GPIO_SDHICMD0); |
| |
| /* SDHI1 */ |
| gpio_request(GPIO_FN_SDHICLK1, NULL); |
| gpio_request(GPIO_FN_SDHID1_0, NULL); |
| gpio_request(GPIO_FN_SDHID1_1, NULL); |
| gpio_request(GPIO_FN_SDHID1_2, NULL); |
| gpio_request(GPIO_FN_SDHID1_3, NULL); |
| gpio_request(GPIO_FN_SDHICMD1, NULL); |
| gpio_pull_up(GPIO_SDHID1_D0); |
| gpio_pull_up(GPIO_SDHID1_D1); |
| gpio_pull_up(GPIO_SDHID1_D2); |
| gpio_pull_up(GPIO_SDHID1_D3); |
| gpio_pull_up(GPIO_SDHICMD1); |
| |
| sh7377_add_standard_devices(); |
| |
| platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices)); |
| } |
| |
| static void __init g4evm_timer_init(void) |
| { |
| sh7377_clock_init(); |
| shmobile_timer.init(); |
| } |
| |
| static struct sys_timer g4evm_timer = { |
| .init = g4evm_timer_init, |
| }; |
| |
| MACHINE_START(G4EVM, "g4evm") |
| .map_io = g4evm_map_io, |
| .init_irq = sh7377_init_irq, |
| .handle_irq = shmobile_handle_irq_intc, |
| .init_machine = g4evm_init, |
| .timer = &g4evm_timer, |
| MACHINE_END |