| /* |
| * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de> |
| * JZ4740 SoC NAND controller driver |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| */ |
| |
| #include <linux/ioport.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/nand.h> |
| #include <linux/mtd/partitions.h> |
| |
| #include <linux/gpio.h> |
| |
| #include <asm/mach-jz4740/jz4740_nand.h> |
| |
| #define JZ_REG_NAND_CTRL 0x50 |
| #define JZ_REG_NAND_ECC_CTRL 0x100 |
| #define JZ_REG_NAND_DATA 0x104 |
| #define JZ_REG_NAND_PAR0 0x108 |
| #define JZ_REG_NAND_PAR1 0x10C |
| #define JZ_REG_NAND_PAR2 0x110 |
| #define JZ_REG_NAND_IRQ_STAT 0x114 |
| #define JZ_REG_NAND_IRQ_CTRL 0x118 |
| #define JZ_REG_NAND_ERR(x) (0x11C + ((x) << 2)) |
| |
| #define JZ_NAND_ECC_CTRL_PAR_READY BIT(4) |
| #define JZ_NAND_ECC_CTRL_ENCODING BIT(3) |
| #define JZ_NAND_ECC_CTRL_RS BIT(2) |
| #define JZ_NAND_ECC_CTRL_RESET BIT(1) |
| #define JZ_NAND_ECC_CTRL_ENABLE BIT(0) |
| |
| #define JZ_NAND_STATUS_ERR_COUNT (BIT(31) | BIT(30) | BIT(29)) |
| #define JZ_NAND_STATUS_PAD_FINISH BIT(4) |
| #define JZ_NAND_STATUS_DEC_FINISH BIT(3) |
| #define JZ_NAND_STATUS_ENC_FINISH BIT(2) |
| #define JZ_NAND_STATUS_UNCOR_ERROR BIT(1) |
| #define JZ_NAND_STATUS_ERROR BIT(0) |
| |
| #define JZ_NAND_CTRL_ENABLE_CHIP(x) BIT((x) << 1) |
| #define JZ_NAND_CTRL_ASSERT_CHIP(x) BIT(((x) << 1) + 1) |
| |
| #define JZ_NAND_MEM_ADDR_OFFSET 0x10000 |
| #define JZ_NAND_MEM_CMD_OFFSET 0x08000 |
| |
| struct jz_nand { |
| struct mtd_info mtd; |
| struct nand_chip chip; |
| void __iomem *base; |
| struct resource *mem; |
| |
| void __iomem *bank_base; |
| struct resource *bank_mem; |
| |
| struct jz_nand_platform_data *pdata; |
| bool is_reading; |
| }; |
| |
| static inline struct jz_nand *mtd_to_jz_nand(struct mtd_info *mtd) |
| { |
| return container_of(mtd, struct jz_nand, mtd); |
| } |
| |
| static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl) |
| { |
| struct jz_nand *nand = mtd_to_jz_nand(mtd); |
| struct nand_chip *chip = mtd->priv; |
| uint32_t reg; |
| |
| if (ctrl & NAND_CTRL_CHANGE) { |
| BUG_ON((ctrl & NAND_ALE) && (ctrl & NAND_CLE)); |
| if (ctrl & NAND_ALE) |
| chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_ADDR_OFFSET; |
| else if (ctrl & NAND_CLE) |
| chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_CMD_OFFSET; |
| else |
| chip->IO_ADDR_W = nand->bank_base; |
| |
| reg = readl(nand->base + JZ_REG_NAND_CTRL); |
| if (ctrl & NAND_NCE) |
| reg |= JZ_NAND_CTRL_ASSERT_CHIP(0); |
| else |
| reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(0); |
| writel(reg, nand->base + JZ_REG_NAND_CTRL); |
| } |
| if (dat != NAND_CMD_NONE) |
| writeb(dat, chip->IO_ADDR_W); |
| } |
| |
| static int jz_nand_dev_ready(struct mtd_info *mtd) |
| { |
| struct jz_nand *nand = mtd_to_jz_nand(mtd); |
| return gpio_get_value_cansleep(nand->pdata->busy_gpio); |
| } |
| |
| static void jz_nand_hwctl(struct mtd_info *mtd, int mode) |
| { |
| struct jz_nand *nand = mtd_to_jz_nand(mtd); |
| uint32_t reg; |
| |
| writel(0, nand->base + JZ_REG_NAND_IRQ_STAT); |
| reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL); |
| |
| reg |= JZ_NAND_ECC_CTRL_RESET; |
| reg |= JZ_NAND_ECC_CTRL_ENABLE; |
| reg |= JZ_NAND_ECC_CTRL_RS; |
| |
| switch (mode) { |
| case NAND_ECC_READ: |
| reg &= ~JZ_NAND_ECC_CTRL_ENCODING; |
| nand->is_reading = true; |
| break; |
| case NAND_ECC_WRITE: |
| reg |= JZ_NAND_ECC_CTRL_ENCODING; |
| nand->is_reading = false; |
| break; |
| default: |
| break; |
| } |
| |
| writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL); |
| } |
| |
| static int jz_nand_calculate_ecc_rs(struct mtd_info *mtd, const uint8_t *dat, |
| uint8_t *ecc_code) |
| { |
| struct jz_nand *nand = mtd_to_jz_nand(mtd); |
| uint32_t reg, status; |
| int i; |
| unsigned int timeout = 1000; |
| static uint8_t empty_block_ecc[] = {0xcd, 0x9d, 0x90, 0x58, 0xf4, |
| 0x8b, 0xff, 0xb7, 0x6f}; |
| |
| if (nand->is_reading) |
| return 0; |
| |
| do { |
| status = readl(nand->base + JZ_REG_NAND_IRQ_STAT); |
| } while (!(status & JZ_NAND_STATUS_ENC_FINISH) && --timeout); |
| |
| if (timeout == 0) |
| return -1; |
| |
| reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL); |
| reg &= ~JZ_NAND_ECC_CTRL_ENABLE; |
| writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL); |
| |
| for (i = 0; i < 9; ++i) |
| ecc_code[i] = readb(nand->base + JZ_REG_NAND_PAR0 + i); |
| |
| /* If the written data is completly 0xff, we also want to write 0xff as |
| * ecc, otherwise we will get in trouble when doing subpage writes. */ |
| if (memcmp(ecc_code, empty_block_ecc, 9) == 0) |
| memset(ecc_code, 0xff, 9); |
| |
| return 0; |
| } |
| |
| static void jz_nand_correct_data(uint8_t *dat, int index, int mask) |
| { |
| int offset = index & 0x7; |
| uint16_t data; |
| |
| index += (index >> 3); |
| |
| data = dat[index]; |
| data |= dat[index+1] << 8; |
| |
| mask ^= (data >> offset) & 0x1ff; |
| data &= ~(0x1ff << offset); |
| data |= (mask << offset); |
| |
| dat[index] = data & 0xff; |
| dat[index+1] = (data >> 8) & 0xff; |
| } |
| |
| static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat, |
| uint8_t *read_ecc, uint8_t *calc_ecc) |
| { |
| struct jz_nand *nand = mtd_to_jz_nand(mtd); |
| int i, error_count, index; |
| uint32_t reg, status, error; |
| uint32_t t; |
| unsigned int timeout = 1000; |
| |
| t = read_ecc[0]; |
| |
| if (t == 0xff) { |
| for (i = 1; i < 9; ++i) |
| t &= read_ecc[i]; |
| |
| t &= dat[0]; |
| t &= dat[nand->chip.ecc.size / 2]; |
| t &= dat[nand->chip.ecc.size - 1]; |
| |
| if (t == 0xff) { |
| for (i = 1; i < nand->chip.ecc.size - 1; ++i) |
| t &= dat[i]; |
| if (t == 0xff) |
| return 0; |
| } |
| } |
| |
| for (i = 0; i < 9; ++i) |
| writeb(read_ecc[i], nand->base + JZ_REG_NAND_PAR0 + i); |
| |
| reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL); |
| reg |= JZ_NAND_ECC_CTRL_PAR_READY; |
| writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL); |
| |
| do { |
| status = readl(nand->base + JZ_REG_NAND_IRQ_STAT); |
| } while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout); |
| |
| if (timeout == 0) |
| return -1; |
| |
| reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL); |
| reg &= ~JZ_NAND_ECC_CTRL_ENABLE; |
| writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL); |
| |
| if (status & JZ_NAND_STATUS_ERROR) { |
| if (status & JZ_NAND_STATUS_UNCOR_ERROR) |
| return -1; |
| |
| error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29; |
| |
| for (i = 0; i < error_count; ++i) { |
| error = readl(nand->base + JZ_REG_NAND_ERR(i)); |
| index = ((error >> 16) & 0x1ff) - 1; |
| if (index >= 0 && index < 512) |
| jz_nand_correct_data(dat, index, error & 0x1ff); |
| } |
| |
| return error_count; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_MTD_CMDLINE_PARTS |
| static const char *part_probes[] = {"cmdline", NULL}; |
| #endif |
| |
| static int jz_nand_ioremap_resource(struct platform_device *pdev, |
| const char *name, struct resource **res, void __iomem **base) |
| { |
| int ret; |
| |
| *res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name); |
| if (!*res) { |
| dev_err(&pdev->dev, "Failed to get platform %s memory\n", name); |
| ret = -ENXIO; |
| goto err; |
| } |
| |
| *res = request_mem_region((*res)->start, resource_size(*res), |
| pdev->name); |
| if (!*res) { |
| dev_err(&pdev->dev, "Failed to request %s memory region\n", name); |
| ret = -EBUSY; |
| goto err; |
| } |
| |
| *base = ioremap((*res)->start, resource_size(*res)); |
| if (!*base) { |
| dev_err(&pdev->dev, "Failed to ioremap %s memory region\n", name); |
| ret = -EBUSY; |
| goto err_release_mem; |
| } |
| |
| return 0; |
| |
| err_release_mem: |
| release_mem_region((*res)->start, resource_size(*res)); |
| err: |
| *res = NULL; |
| *base = NULL; |
| return ret; |
| } |
| |
| static int __devinit jz_nand_probe(struct platform_device *pdev) |
| { |
| int ret; |
| struct jz_nand *nand; |
| struct nand_chip *chip; |
| struct mtd_info *mtd; |
| struct jz_nand_platform_data *pdata = pdev->dev.platform_data; |
| #ifdef CONFIG_MTD_PARTITIONS |
| struct mtd_partition *partition_info; |
| int num_partitions = 0; |
| #endif |
| |
| nand = kzalloc(sizeof(*nand), GFP_KERNEL); |
| if (!nand) { |
| dev_err(&pdev->dev, "Failed to allocate device structure.\n"); |
| return -ENOMEM; |
| } |
| |
| ret = jz_nand_ioremap_resource(pdev, "mmio", &nand->mem, &nand->base); |
| if (ret) |
| goto err_free; |
| ret = jz_nand_ioremap_resource(pdev, "bank", &nand->bank_mem, |
| &nand->bank_base); |
| if (ret) |
| goto err_iounmap_mmio; |
| |
| if (pdata && gpio_is_valid(pdata->busy_gpio)) { |
| ret = gpio_request(pdata->busy_gpio, "NAND busy pin"); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "Failed to request busy gpio %d: %d\n", |
| pdata->busy_gpio, ret); |
| goto err_iounmap_mem; |
| } |
| } |
| |
| mtd = &nand->mtd; |
| chip = &nand->chip; |
| mtd->priv = chip; |
| mtd->owner = THIS_MODULE; |
| mtd->name = "jz4740-nand"; |
| |
| chip->ecc.hwctl = jz_nand_hwctl; |
| chip->ecc.calculate = jz_nand_calculate_ecc_rs; |
| chip->ecc.correct = jz_nand_correct_ecc_rs; |
| chip->ecc.mode = NAND_ECC_HW_OOB_FIRST; |
| chip->ecc.size = 512; |
| chip->ecc.bytes = 9; |
| |
| if (pdata) |
| chip->ecc.layout = pdata->ecc_layout; |
| |
| chip->chip_delay = 50; |
| chip->cmd_ctrl = jz_nand_cmd_ctrl; |
| |
| if (pdata && gpio_is_valid(pdata->busy_gpio)) |
| chip->dev_ready = jz_nand_dev_ready; |
| |
| chip->IO_ADDR_R = nand->bank_base; |
| chip->IO_ADDR_W = nand->bank_base; |
| |
| nand->pdata = pdata; |
| platform_set_drvdata(pdev, nand); |
| |
| writel(JZ_NAND_CTRL_ENABLE_CHIP(0), nand->base + JZ_REG_NAND_CTRL); |
| |
| ret = nand_scan_ident(mtd, 1, NULL); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to scan nand\n"); |
| goto err_gpio_free; |
| } |
| |
| if (pdata && pdata->ident_callback) { |
| pdata->ident_callback(pdev, chip, &pdata->partitions, |
| &pdata->num_partitions); |
| } |
| |
| ret = nand_scan_tail(mtd); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to scan nand\n"); |
| goto err_gpio_free; |
| } |
| |
| #ifdef CONFIG_MTD_PARTITIONS |
| #ifdef CONFIG_MTD_CMDLINE_PARTS |
| num_partitions = parse_mtd_partitions(mtd, part_probes, |
| &partition_info, 0); |
| #endif |
| if (num_partitions <= 0 && pdata) { |
| num_partitions = pdata->num_partitions; |
| partition_info = pdata->partitions; |
| } |
| |
| if (num_partitions > 0) |
| ret = add_mtd_partitions(mtd, partition_info, num_partitions); |
| else |
| #endif |
| ret = add_mtd_device(mtd); |
| |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to add mtd device\n"); |
| goto err_nand_release; |
| } |
| |
| dev_info(&pdev->dev, "Successfully registered JZ4740 NAND driver\n"); |
| |
| return 0; |
| |
| err_nand_release: |
| nand_release(&nand->mtd); |
| err_gpio_free: |
| platform_set_drvdata(pdev, NULL); |
| gpio_free(pdata->busy_gpio); |
| err_iounmap_mem: |
| iounmap(nand->bank_base); |
| err_iounmap_mmio: |
| iounmap(nand->base); |
| err_free: |
| kfree(nand); |
| return ret; |
| } |
| |
| static int __devexit jz_nand_remove(struct platform_device *pdev) |
| { |
| struct jz_nand *nand = platform_get_drvdata(pdev); |
| |
| nand_release(&nand->mtd); |
| |
| /* Deassert and disable all chips */ |
| writel(0, nand->base + JZ_REG_NAND_CTRL); |
| |
| iounmap(nand->bank_base); |
| release_mem_region(nand->bank_mem->start, resource_size(nand->bank_mem)); |
| iounmap(nand->base); |
| release_mem_region(nand->mem->start, resource_size(nand->mem)); |
| |
| platform_set_drvdata(pdev, NULL); |
| kfree(nand); |
| |
| return 0; |
| } |
| |
| static struct platform_driver jz_nand_driver = { |
| .probe = jz_nand_probe, |
| .remove = __devexit_p(jz_nand_remove), |
| .driver = { |
| .name = "jz4740-nand", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init jz_nand_init(void) |
| { |
| return platform_driver_register(&jz_nand_driver); |
| } |
| module_init(jz_nand_init); |
| |
| static void __exit jz_nand_exit(void) |
| { |
| platform_driver_unregister(&jz_nand_driver); |
| } |
| module_exit(jz_nand_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); |
| MODULE_DESCRIPTION("NAND controller driver for JZ4740 SoC"); |
| MODULE_ALIAS("platform:jz4740-nand"); |