| /* |
| * drivers/cpufreq/cpufreq_governor.c |
| * |
| * CPUFREQ governors common code |
| * |
| * Copyright (C) 2001 Russell King |
| * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. |
| * (C) 2003 Jun Nakajima <jun.nakajima@intel.com> |
| * (C) 2009 Alexander Clouter <alex@digriz.org.uk> |
| * (c) 2012 Viresh Kumar <viresh.kumar@linaro.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/export.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/slab.h> |
| |
| #include "cpufreq_governor.h" |
| |
| static DEFINE_PER_CPU(struct cpu_dbs_info, cpu_dbs); |
| |
| static DEFINE_MUTEX(gov_dbs_data_mutex); |
| |
| /* Common sysfs tunables */ |
| /** |
| * store_sampling_rate - update sampling rate effective immediately if needed. |
| * |
| * If new rate is smaller than the old, simply updating |
| * dbs.sampling_rate might not be appropriate. For example, if the |
| * original sampling_rate was 1 second and the requested new sampling rate is 10 |
| * ms because the user needs immediate reaction from ondemand governor, but not |
| * sure if higher frequency will be required or not, then, the governor may |
| * change the sampling rate too late; up to 1 second later. Thus, if we are |
| * reducing the sampling rate, we need to make the new value effective |
| * immediately. |
| * |
| * This must be called with dbs_data->mutex held, otherwise traversing |
| * policy_dbs_list isn't safe. |
| */ |
| ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf, |
| size_t count) |
| { |
| struct dbs_data *dbs_data = to_dbs_data(attr_set); |
| struct policy_dbs_info *policy_dbs; |
| unsigned int rate; |
| int ret; |
| ret = sscanf(buf, "%u", &rate); |
| if (ret != 1) |
| return -EINVAL; |
| |
| dbs_data->sampling_rate = max(rate, dbs_data->min_sampling_rate); |
| |
| /* |
| * We are operating under dbs_data->mutex and so the list and its |
| * entries can't be freed concurrently. |
| */ |
| list_for_each_entry(policy_dbs, &attr_set->policy_list, list) { |
| mutex_lock(&policy_dbs->update_mutex); |
| /* |
| * On 32-bit architectures this may race with the |
| * sample_delay_ns read in dbs_update_util_handler(), but that |
| * really doesn't matter. If the read returns a value that's |
| * too big, the sample will be skipped, but the next invocation |
| * of dbs_update_util_handler() (when the update has been |
| * completed) will take a sample. |
| * |
| * If this runs in parallel with dbs_work_handler(), we may end |
| * up overwriting the sample_delay_ns value that it has just |
| * written, but it will be corrected next time a sample is |
| * taken, so it shouldn't be significant. |
| */ |
| gov_update_sample_delay(policy_dbs, 0); |
| mutex_unlock(&policy_dbs->update_mutex); |
| } |
| |
| return count; |
| } |
| EXPORT_SYMBOL_GPL(store_sampling_rate); |
| |
| /** |
| * gov_update_cpu_data - Update CPU load data. |
| * @dbs_data: Top-level governor data pointer. |
| * |
| * Update CPU load data for all CPUs in the domain governed by @dbs_data |
| * (that may be a single policy or a bunch of them if governor tunables are |
| * system-wide). |
| * |
| * Call under the @dbs_data mutex. |
| */ |
| void gov_update_cpu_data(struct dbs_data *dbs_data) |
| { |
| struct policy_dbs_info *policy_dbs; |
| |
| list_for_each_entry(policy_dbs, &dbs_data->attr_set.policy_list, list) { |
| unsigned int j; |
| |
| for_each_cpu(j, policy_dbs->policy->cpus) { |
| struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j); |
| |
| j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_update_time, |
| dbs_data->io_is_busy); |
| if (dbs_data->ignore_nice_load) |
| j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE]; |
| } |
| } |
| } |
| EXPORT_SYMBOL_GPL(gov_update_cpu_data); |
| |
| unsigned int dbs_update(struct cpufreq_policy *policy) |
| { |
| struct policy_dbs_info *policy_dbs = policy->governor_data; |
| struct dbs_data *dbs_data = policy_dbs->dbs_data; |
| unsigned int ignore_nice = dbs_data->ignore_nice_load; |
| unsigned int max_load = 0, idle_periods = UINT_MAX; |
| unsigned int sampling_rate, io_busy, j; |
| |
| /* |
| * Sometimes governors may use an additional multiplier to increase |
| * sample delays temporarily. Apply that multiplier to sampling_rate |
| * so as to keep the wake-up-from-idle detection logic a bit |
| * conservative. |
| */ |
| sampling_rate = dbs_data->sampling_rate * policy_dbs->rate_mult; |
| /* |
| * For the purpose of ondemand, waiting for disk IO is an indication |
| * that you're performance critical, and not that the system is actually |
| * idle, so do not add the iowait time to the CPU idle time then. |
| */ |
| io_busy = dbs_data->io_is_busy; |
| |
| /* Get Absolute Load */ |
| for_each_cpu(j, policy->cpus) { |
| struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j); |
| u64 update_time, cur_idle_time; |
| unsigned int idle_time, time_elapsed; |
| unsigned int load; |
| |
| cur_idle_time = get_cpu_idle_time(j, &update_time, io_busy); |
| |
| time_elapsed = update_time - j_cdbs->prev_update_time; |
| j_cdbs->prev_update_time = update_time; |
| |
| idle_time = cur_idle_time - j_cdbs->prev_cpu_idle; |
| j_cdbs->prev_cpu_idle = cur_idle_time; |
| |
| if (ignore_nice) { |
| u64 cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE]; |
| |
| idle_time += div_u64(cur_nice - j_cdbs->prev_cpu_nice, NSEC_PER_USEC); |
| j_cdbs->prev_cpu_nice = cur_nice; |
| } |
| |
| if (unlikely(!time_elapsed)) { |
| /* |
| * That can only happen when this function is called |
| * twice in a row with a very short interval between the |
| * calls, so the previous load value can be used then. |
| */ |
| load = j_cdbs->prev_load; |
| } else if (unlikely(time_elapsed > 2 * sampling_rate && |
| j_cdbs->prev_load)) { |
| /* |
| * If the CPU had gone completely idle and a task has |
| * just woken up on this CPU now, it would be unfair to |
| * calculate 'load' the usual way for this elapsed |
| * time-window, because it would show near-zero load, |
| * irrespective of how CPU intensive that task actually |
| * was. This is undesirable for latency-sensitive bursty |
| * workloads. |
| * |
| * To avoid this, reuse the 'load' from the previous |
| * time-window and give this task a chance to start with |
| * a reasonably high CPU frequency. However, that |
| * shouldn't be over-done, lest we get stuck at a high |
| * load (high frequency) for too long, even when the |
| * current system load has actually dropped down, so |
| * clear prev_load to guarantee that the load will be |
| * computed again next time. |
| * |
| * Detecting this situation is easy: the governor's |
| * utilization update handler would not have run during |
| * CPU-idle periods. Hence, an unusually large |
| * 'time_elapsed' (as compared to the sampling rate) |
| * indicates this scenario. |
| */ |
| load = j_cdbs->prev_load; |
| j_cdbs->prev_load = 0; |
| } else { |
| if (time_elapsed >= idle_time) { |
| load = 100 * (time_elapsed - idle_time) / time_elapsed; |
| } else { |
| /* |
| * That can happen if idle_time is returned by |
| * get_cpu_idle_time_jiffy(). In that case |
| * idle_time is roughly equal to the difference |
| * between time_elapsed and "busy time" obtained |
| * from CPU statistics. Then, the "busy time" |
| * can end up being greater than time_elapsed |
| * (for example, if jiffies_64 and the CPU |
| * statistics are updated by different CPUs), |
| * so idle_time may in fact be negative. That |
| * means, though, that the CPU was busy all |
| * the time (on the rough average) during the |
| * last sampling interval and 100 can be |
| * returned as the load. |
| */ |
| load = (int)idle_time < 0 ? 100 : 0; |
| } |
| j_cdbs->prev_load = load; |
| } |
| |
| if (time_elapsed > 2 * sampling_rate) { |
| unsigned int periods = time_elapsed / sampling_rate; |
| |
| if (periods < idle_periods) |
| idle_periods = periods; |
| } |
| |
| if (load > max_load) |
| max_load = load; |
| } |
| |
| policy_dbs->idle_periods = idle_periods; |
| |
| return max_load; |
| } |
| EXPORT_SYMBOL_GPL(dbs_update); |
| |
| static void dbs_work_handler(struct work_struct *work) |
| { |
| struct policy_dbs_info *policy_dbs; |
| struct cpufreq_policy *policy; |
| struct dbs_governor *gov; |
| |
| policy_dbs = container_of(work, struct policy_dbs_info, work); |
| policy = policy_dbs->policy; |
| gov = dbs_governor_of(policy); |
| |
| /* |
| * Make sure cpufreq_governor_limits() isn't evaluating load or the |
| * ondemand governor isn't updating the sampling rate in parallel. |
| */ |
| mutex_lock(&policy_dbs->update_mutex); |
| gov_update_sample_delay(policy_dbs, gov->gov_dbs_update(policy)); |
| mutex_unlock(&policy_dbs->update_mutex); |
| |
| /* Allow the utilization update handler to queue up more work. */ |
| atomic_set(&policy_dbs->work_count, 0); |
| /* |
| * If the update below is reordered with respect to the sample delay |
| * modification, the utilization update handler may end up using a stale |
| * sample delay value. |
| */ |
| smp_wmb(); |
| policy_dbs->work_in_progress = false; |
| } |
| |
| static void dbs_irq_work(struct irq_work *irq_work) |
| { |
| struct policy_dbs_info *policy_dbs; |
| |
| policy_dbs = container_of(irq_work, struct policy_dbs_info, irq_work); |
| schedule_work_on(smp_processor_id(), &policy_dbs->work); |
| } |
| |
| static void dbs_update_util_handler(struct update_util_data *data, u64 time, |
| unsigned int flags) |
| { |
| struct cpu_dbs_info *cdbs = container_of(data, struct cpu_dbs_info, update_util); |
| struct policy_dbs_info *policy_dbs = cdbs->policy_dbs; |
| u64 delta_ns, lst; |
| |
| /* |
| * The work may not be allowed to be queued up right now. |
| * Possible reasons: |
| * - Work has already been queued up or is in progress. |
| * - It is too early (too little time from the previous sample). |
| */ |
| if (policy_dbs->work_in_progress) |
| return; |
| |
| /* |
| * If the reads below are reordered before the check above, the value |
| * of sample_delay_ns used in the computation may be stale. |
| */ |
| smp_rmb(); |
| lst = READ_ONCE(policy_dbs->last_sample_time); |
| delta_ns = time - lst; |
| if ((s64)delta_ns < policy_dbs->sample_delay_ns) |
| return; |
| |
| /* |
| * If the policy is not shared, the irq_work may be queued up right away |
| * at this point. Otherwise, we need to ensure that only one of the |
| * CPUs sharing the policy will do that. |
| */ |
| if (policy_dbs->is_shared) { |
| if (!atomic_add_unless(&policy_dbs->work_count, 1, 1)) |
| return; |
| |
| /* |
| * If another CPU updated last_sample_time in the meantime, we |
| * shouldn't be here, so clear the work counter and bail out. |
| */ |
| if (unlikely(lst != READ_ONCE(policy_dbs->last_sample_time))) { |
| atomic_set(&policy_dbs->work_count, 0); |
| return; |
| } |
| } |
| |
| policy_dbs->last_sample_time = time; |
| policy_dbs->work_in_progress = true; |
| irq_work_queue(&policy_dbs->irq_work); |
| } |
| |
| static void gov_set_update_util(struct policy_dbs_info *policy_dbs, |
| unsigned int delay_us) |
| { |
| struct cpufreq_policy *policy = policy_dbs->policy; |
| int cpu; |
| |
| gov_update_sample_delay(policy_dbs, delay_us); |
| policy_dbs->last_sample_time = 0; |
| |
| for_each_cpu(cpu, policy->cpus) { |
| struct cpu_dbs_info *cdbs = &per_cpu(cpu_dbs, cpu); |
| |
| cpufreq_add_update_util_hook(cpu, &cdbs->update_util, |
| dbs_update_util_handler); |
| } |
| } |
| |
| static inline void gov_clear_update_util(struct cpufreq_policy *policy) |
| { |
| int i; |
| |
| for_each_cpu(i, policy->cpus) |
| cpufreq_remove_update_util_hook(i); |
| |
| synchronize_sched(); |
| } |
| |
| static struct policy_dbs_info *alloc_policy_dbs_info(struct cpufreq_policy *policy, |
| struct dbs_governor *gov) |
| { |
| struct policy_dbs_info *policy_dbs; |
| int j; |
| |
| /* Allocate memory for per-policy governor data. */ |
| policy_dbs = gov->alloc(); |
| if (!policy_dbs) |
| return NULL; |
| |
| policy_dbs->policy = policy; |
| mutex_init(&policy_dbs->update_mutex); |
| atomic_set(&policy_dbs->work_count, 0); |
| init_irq_work(&policy_dbs->irq_work, dbs_irq_work); |
| INIT_WORK(&policy_dbs->work, dbs_work_handler); |
| |
| /* Set policy_dbs for all CPUs, online+offline */ |
| for_each_cpu(j, policy->related_cpus) { |
| struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j); |
| |
| j_cdbs->policy_dbs = policy_dbs; |
| } |
| return policy_dbs; |
| } |
| |
| static void free_policy_dbs_info(struct policy_dbs_info *policy_dbs, |
| struct dbs_governor *gov) |
| { |
| int j; |
| |
| mutex_destroy(&policy_dbs->update_mutex); |
| |
| for_each_cpu(j, policy_dbs->policy->related_cpus) { |
| struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j); |
| |
| j_cdbs->policy_dbs = NULL; |
| j_cdbs->update_util.func = NULL; |
| } |
| gov->free(policy_dbs); |
| } |
| |
| int cpufreq_dbs_governor_init(struct cpufreq_policy *policy) |
| { |
| struct dbs_governor *gov = dbs_governor_of(policy); |
| struct dbs_data *dbs_data; |
| struct policy_dbs_info *policy_dbs; |
| unsigned int latency; |
| int ret = 0; |
| |
| /* State should be equivalent to EXIT */ |
| if (policy->governor_data) |
| return -EBUSY; |
| |
| policy_dbs = alloc_policy_dbs_info(policy, gov); |
| if (!policy_dbs) |
| return -ENOMEM; |
| |
| /* Protect gov->gdbs_data against concurrent updates. */ |
| mutex_lock(&gov_dbs_data_mutex); |
| |
| dbs_data = gov->gdbs_data; |
| if (dbs_data) { |
| if (WARN_ON(have_governor_per_policy())) { |
| ret = -EINVAL; |
| goto free_policy_dbs_info; |
| } |
| policy_dbs->dbs_data = dbs_data; |
| policy->governor_data = policy_dbs; |
| |
| gov_attr_set_get(&dbs_data->attr_set, &policy_dbs->list); |
| goto out; |
| } |
| |
| dbs_data = kzalloc(sizeof(*dbs_data), GFP_KERNEL); |
| if (!dbs_data) { |
| ret = -ENOMEM; |
| goto free_policy_dbs_info; |
| } |
| |
| gov_attr_set_init(&dbs_data->attr_set, &policy_dbs->list); |
| |
| ret = gov->init(dbs_data); |
| if (ret) |
| goto free_policy_dbs_info; |
| |
| /* policy latency is in ns. Convert it to us first */ |
| latency = policy->cpuinfo.transition_latency / 1000; |
| if (latency == 0) |
| latency = 1; |
| |
| /* Bring kernel and HW constraints together */ |
| dbs_data->min_sampling_rate = max(dbs_data->min_sampling_rate, |
| MIN_LATENCY_MULTIPLIER * latency); |
| dbs_data->sampling_rate = max(dbs_data->min_sampling_rate, |
| LATENCY_MULTIPLIER * latency); |
| |
| if (!have_governor_per_policy()) |
| gov->gdbs_data = dbs_data; |
| |
| policy_dbs->dbs_data = dbs_data; |
| policy->governor_data = policy_dbs; |
| |
| gov->kobj_type.sysfs_ops = &governor_sysfs_ops; |
| ret = kobject_init_and_add(&dbs_data->attr_set.kobj, &gov->kobj_type, |
| get_governor_parent_kobj(policy), |
| "%s", gov->gov.name); |
| if (!ret) |
| goto out; |
| |
| /* Failure, so roll back. */ |
| pr_err("initialization failed (dbs_data kobject init error %d)\n", ret); |
| |
| policy->governor_data = NULL; |
| |
| if (!have_governor_per_policy()) |
| gov->gdbs_data = NULL; |
| gov->exit(dbs_data); |
| kfree(dbs_data); |
| |
| free_policy_dbs_info: |
| free_policy_dbs_info(policy_dbs, gov); |
| |
| out: |
| mutex_unlock(&gov_dbs_data_mutex); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_init); |
| |
| void cpufreq_dbs_governor_exit(struct cpufreq_policy *policy) |
| { |
| struct dbs_governor *gov = dbs_governor_of(policy); |
| struct policy_dbs_info *policy_dbs = policy->governor_data; |
| struct dbs_data *dbs_data = policy_dbs->dbs_data; |
| unsigned int count; |
| |
| /* Protect gov->gdbs_data against concurrent updates. */ |
| mutex_lock(&gov_dbs_data_mutex); |
| |
| count = gov_attr_set_put(&dbs_data->attr_set, &policy_dbs->list); |
| |
| policy->governor_data = NULL; |
| |
| if (!count) { |
| if (!have_governor_per_policy()) |
| gov->gdbs_data = NULL; |
| |
| gov->exit(dbs_data); |
| kfree(dbs_data); |
| } |
| |
| free_policy_dbs_info(policy_dbs, gov); |
| |
| mutex_unlock(&gov_dbs_data_mutex); |
| } |
| EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_exit); |
| |
| int cpufreq_dbs_governor_start(struct cpufreq_policy *policy) |
| { |
| struct dbs_governor *gov = dbs_governor_of(policy); |
| struct policy_dbs_info *policy_dbs = policy->governor_data; |
| struct dbs_data *dbs_data = policy_dbs->dbs_data; |
| unsigned int sampling_rate, ignore_nice, j; |
| unsigned int io_busy; |
| |
| if (!policy->cur) |
| return -EINVAL; |
| |
| policy_dbs->is_shared = policy_is_shared(policy); |
| policy_dbs->rate_mult = 1; |
| |
| sampling_rate = dbs_data->sampling_rate; |
| ignore_nice = dbs_data->ignore_nice_load; |
| io_busy = dbs_data->io_is_busy; |
| |
| for_each_cpu(j, policy->cpus) { |
| struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j); |
| |
| j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_update_time, io_busy); |
| /* |
| * Make the first invocation of dbs_update() compute the load. |
| */ |
| j_cdbs->prev_load = 0; |
| |
| if (ignore_nice) |
| j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE]; |
| } |
| |
| gov->start(policy); |
| |
| gov_set_update_util(policy_dbs, sampling_rate); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_start); |
| |
| void cpufreq_dbs_governor_stop(struct cpufreq_policy *policy) |
| { |
| struct policy_dbs_info *policy_dbs = policy->governor_data; |
| |
| gov_clear_update_util(policy_dbs->policy); |
| irq_work_sync(&policy_dbs->irq_work); |
| cancel_work_sync(&policy_dbs->work); |
| atomic_set(&policy_dbs->work_count, 0); |
| policy_dbs->work_in_progress = false; |
| } |
| EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_stop); |
| |
| void cpufreq_dbs_governor_limits(struct cpufreq_policy *policy) |
| { |
| struct policy_dbs_info *policy_dbs = policy->governor_data; |
| |
| mutex_lock(&policy_dbs->update_mutex); |
| cpufreq_policy_apply_limits(policy); |
| gov_update_sample_delay(policy_dbs, 0); |
| |
| mutex_unlock(&policy_dbs->update_mutex); |
| } |
| EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_limits); |