| /* |
| * |
| * Copyright 2008 (c) Intel Corporation |
| * Jesse Barnes <jbarnes@virtuousgeek.org> |
| * Copyright 2013 (c) Intel Corporation |
| * Daniel Vetter <daniel.vetter@ffwll.ch> |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <drm/drmP.h> |
| #include <drm/i915_drm.h> |
| #include "intel_drv.h" |
| #include "i915_reg.h" |
| |
| static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 dpll_reg; |
| |
| /* On IVB, 3rd pipe shares PLL with another one */ |
| if (pipe > 1) |
| return false; |
| |
| if (HAS_PCH_SPLIT(dev)) |
| dpll_reg = PCH_DPLL(pipe); |
| else |
| dpll_reg = (pipe == PIPE_A) ? _DPLL_A : _DPLL_B; |
| |
| return (I915_READ(dpll_reg) & DPLL_VCO_ENABLE); |
| } |
| |
| static void i915_save_palette(struct drm_device *dev, enum pipe pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| unsigned long reg = (pipe == PIPE_A ? _PALETTE_A : _PALETTE_B); |
| u32 *array; |
| int i; |
| |
| if (!i915_pipe_enabled(dev, pipe)) |
| return; |
| |
| if (HAS_PCH_SPLIT(dev)) |
| reg = (pipe == PIPE_A) ? _LGC_PALETTE_A : _LGC_PALETTE_B; |
| |
| if (pipe == PIPE_A) |
| array = dev_priv->regfile.save_palette_a; |
| else |
| array = dev_priv->regfile.save_palette_b; |
| |
| for (i = 0; i < 256; i++) |
| array[i] = I915_READ(reg + (i << 2)); |
| } |
| |
| static void i915_restore_palette(struct drm_device *dev, enum pipe pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| unsigned long reg = (pipe == PIPE_A ? _PALETTE_A : _PALETTE_B); |
| u32 *array; |
| int i; |
| |
| if (!i915_pipe_enabled(dev, pipe)) |
| return; |
| |
| if (HAS_PCH_SPLIT(dev)) |
| reg = (pipe == PIPE_A) ? _LGC_PALETTE_A : _LGC_PALETTE_B; |
| |
| if (pipe == PIPE_A) |
| array = dev_priv->regfile.save_palette_a; |
| else |
| array = dev_priv->regfile.save_palette_b; |
| |
| for (i = 0; i < 256; i++) |
| I915_WRITE(reg + (i << 2), array[i]); |
| } |
| |
| void i915_save_display_reg(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int i; |
| |
| /* Cursor state */ |
| dev_priv->regfile.saveCURACNTR = I915_READ(_CURACNTR); |
| dev_priv->regfile.saveCURAPOS = I915_READ(_CURAPOS); |
| dev_priv->regfile.saveCURABASE = I915_READ(_CURABASE); |
| dev_priv->regfile.saveCURBCNTR = I915_READ(_CURBCNTR); |
| dev_priv->regfile.saveCURBPOS = I915_READ(_CURBPOS); |
| dev_priv->regfile.saveCURBBASE = I915_READ(_CURBBASE); |
| if (IS_GEN2(dev)) |
| dev_priv->regfile.saveCURSIZE = I915_READ(CURSIZE); |
| |
| if (HAS_PCH_SPLIT(dev)) { |
| dev_priv->regfile.savePCH_DREF_CONTROL = I915_READ(PCH_DREF_CONTROL); |
| dev_priv->regfile.saveDISP_ARB_CTL = I915_READ(DISP_ARB_CTL); |
| } |
| |
| /* Pipe & plane A info */ |
| dev_priv->regfile.savePIPEACONF = I915_READ(_PIPEACONF); |
| dev_priv->regfile.savePIPEASRC = I915_READ(_PIPEASRC); |
| if (HAS_PCH_SPLIT(dev)) { |
| dev_priv->regfile.saveFPA0 = I915_READ(_PCH_FPA0); |
| dev_priv->regfile.saveFPA1 = I915_READ(_PCH_FPA1); |
| dev_priv->regfile.saveDPLL_A = I915_READ(_PCH_DPLL_A); |
| } else { |
| dev_priv->regfile.saveFPA0 = I915_READ(_FPA0); |
| dev_priv->regfile.saveFPA1 = I915_READ(_FPA1); |
| dev_priv->regfile.saveDPLL_A = I915_READ(_DPLL_A); |
| } |
| if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) |
| dev_priv->regfile.saveDPLL_A_MD = I915_READ(_DPLL_A_MD); |
| dev_priv->regfile.saveHTOTAL_A = I915_READ(_HTOTAL_A); |
| dev_priv->regfile.saveHBLANK_A = I915_READ(_HBLANK_A); |
| dev_priv->regfile.saveHSYNC_A = I915_READ(_HSYNC_A); |
| dev_priv->regfile.saveVTOTAL_A = I915_READ(_VTOTAL_A); |
| dev_priv->regfile.saveVBLANK_A = I915_READ(_VBLANK_A); |
| dev_priv->regfile.saveVSYNC_A = I915_READ(_VSYNC_A); |
| if (!HAS_PCH_SPLIT(dev)) |
| dev_priv->regfile.saveBCLRPAT_A = I915_READ(_BCLRPAT_A); |
| |
| if (HAS_PCH_SPLIT(dev)) { |
| dev_priv->regfile.savePIPEA_DATA_M1 = I915_READ(_PIPEA_DATA_M1); |
| dev_priv->regfile.savePIPEA_DATA_N1 = I915_READ(_PIPEA_DATA_N1); |
| dev_priv->regfile.savePIPEA_LINK_M1 = I915_READ(_PIPEA_LINK_M1); |
| dev_priv->regfile.savePIPEA_LINK_N1 = I915_READ(_PIPEA_LINK_N1); |
| |
| dev_priv->regfile.saveFDI_TXA_CTL = I915_READ(_FDI_TXA_CTL); |
| dev_priv->regfile.saveFDI_RXA_CTL = I915_READ(_FDI_RXA_CTL); |
| |
| dev_priv->regfile.savePFA_CTL_1 = I915_READ(_PFA_CTL_1); |
| dev_priv->regfile.savePFA_WIN_SZ = I915_READ(_PFA_WIN_SZ); |
| dev_priv->regfile.savePFA_WIN_POS = I915_READ(_PFA_WIN_POS); |
| |
| dev_priv->regfile.saveTRANSACONF = I915_READ(_PCH_TRANSACONF); |
| dev_priv->regfile.saveTRANS_HTOTAL_A = I915_READ(_PCH_TRANS_HTOTAL_A); |
| dev_priv->regfile.saveTRANS_HBLANK_A = I915_READ(_PCH_TRANS_HBLANK_A); |
| dev_priv->regfile.saveTRANS_HSYNC_A = I915_READ(_PCH_TRANS_HSYNC_A); |
| dev_priv->regfile.saveTRANS_VTOTAL_A = I915_READ(_PCH_TRANS_VTOTAL_A); |
| dev_priv->regfile.saveTRANS_VBLANK_A = I915_READ(_PCH_TRANS_VBLANK_A); |
| dev_priv->regfile.saveTRANS_VSYNC_A = I915_READ(_PCH_TRANS_VSYNC_A); |
| } |
| |
| dev_priv->regfile.saveDSPACNTR = I915_READ(_DSPACNTR); |
| dev_priv->regfile.saveDSPASTRIDE = I915_READ(_DSPASTRIDE); |
| dev_priv->regfile.saveDSPASIZE = I915_READ(_DSPASIZE); |
| dev_priv->regfile.saveDSPAPOS = I915_READ(_DSPAPOS); |
| dev_priv->regfile.saveDSPAADDR = I915_READ(_DSPAADDR); |
| if (INTEL_INFO(dev)->gen >= 4) { |
| dev_priv->regfile.saveDSPASURF = I915_READ(_DSPASURF); |
| dev_priv->regfile.saveDSPATILEOFF = I915_READ(_DSPATILEOFF); |
| } |
| i915_save_palette(dev, PIPE_A); |
| dev_priv->regfile.savePIPEASTAT = I915_READ(_PIPEASTAT); |
| |
| /* Pipe & plane B info */ |
| dev_priv->regfile.savePIPEBCONF = I915_READ(_PIPEBCONF); |
| dev_priv->regfile.savePIPEBSRC = I915_READ(_PIPEBSRC); |
| if (HAS_PCH_SPLIT(dev)) { |
| dev_priv->regfile.saveFPB0 = I915_READ(_PCH_FPB0); |
| dev_priv->regfile.saveFPB1 = I915_READ(_PCH_FPB1); |
| dev_priv->regfile.saveDPLL_B = I915_READ(_PCH_DPLL_B); |
| } else { |
| dev_priv->regfile.saveFPB0 = I915_READ(_FPB0); |
| dev_priv->regfile.saveFPB1 = I915_READ(_FPB1); |
| dev_priv->regfile.saveDPLL_B = I915_READ(_DPLL_B); |
| } |
| if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) |
| dev_priv->regfile.saveDPLL_B_MD = I915_READ(_DPLL_B_MD); |
| dev_priv->regfile.saveHTOTAL_B = I915_READ(_HTOTAL_B); |
| dev_priv->regfile.saveHBLANK_B = I915_READ(_HBLANK_B); |
| dev_priv->regfile.saveHSYNC_B = I915_READ(_HSYNC_B); |
| dev_priv->regfile.saveVTOTAL_B = I915_READ(_VTOTAL_B); |
| dev_priv->regfile.saveVBLANK_B = I915_READ(_VBLANK_B); |
| dev_priv->regfile.saveVSYNC_B = I915_READ(_VSYNC_B); |
| if (!HAS_PCH_SPLIT(dev)) |
| dev_priv->regfile.saveBCLRPAT_B = I915_READ(_BCLRPAT_B); |
| |
| if (HAS_PCH_SPLIT(dev)) { |
| dev_priv->regfile.savePIPEB_DATA_M1 = I915_READ(_PIPEB_DATA_M1); |
| dev_priv->regfile.savePIPEB_DATA_N1 = I915_READ(_PIPEB_DATA_N1); |
| dev_priv->regfile.savePIPEB_LINK_M1 = I915_READ(_PIPEB_LINK_M1); |
| dev_priv->regfile.savePIPEB_LINK_N1 = I915_READ(_PIPEB_LINK_N1); |
| |
| dev_priv->regfile.saveFDI_TXB_CTL = I915_READ(_FDI_TXB_CTL); |
| dev_priv->regfile.saveFDI_RXB_CTL = I915_READ(_FDI_RXB_CTL); |
| |
| dev_priv->regfile.savePFB_CTL_1 = I915_READ(_PFB_CTL_1); |
| dev_priv->regfile.savePFB_WIN_SZ = I915_READ(_PFB_WIN_SZ); |
| dev_priv->regfile.savePFB_WIN_POS = I915_READ(_PFB_WIN_POS); |
| |
| dev_priv->regfile.saveTRANSBCONF = I915_READ(_PCH_TRANSBCONF); |
| dev_priv->regfile.saveTRANS_HTOTAL_B = I915_READ(_PCH_TRANS_HTOTAL_B); |
| dev_priv->regfile.saveTRANS_HBLANK_B = I915_READ(_PCH_TRANS_HBLANK_B); |
| dev_priv->regfile.saveTRANS_HSYNC_B = I915_READ(_PCH_TRANS_HSYNC_B); |
| dev_priv->regfile.saveTRANS_VTOTAL_B = I915_READ(_PCH_TRANS_VTOTAL_B); |
| dev_priv->regfile.saveTRANS_VBLANK_B = I915_READ(_PCH_TRANS_VBLANK_B); |
| dev_priv->regfile.saveTRANS_VSYNC_B = I915_READ(_PCH_TRANS_VSYNC_B); |
| } |
| |
| dev_priv->regfile.saveDSPBCNTR = I915_READ(_DSPBCNTR); |
| dev_priv->regfile.saveDSPBSTRIDE = I915_READ(_DSPBSTRIDE); |
| dev_priv->regfile.saveDSPBSIZE = I915_READ(_DSPBSIZE); |
| dev_priv->regfile.saveDSPBPOS = I915_READ(_DSPBPOS); |
| dev_priv->regfile.saveDSPBADDR = I915_READ(_DSPBADDR); |
| if (INTEL_INFO(dev)->gen >= 4) { |
| dev_priv->regfile.saveDSPBSURF = I915_READ(_DSPBSURF); |
| dev_priv->regfile.saveDSPBTILEOFF = I915_READ(_DSPBTILEOFF); |
| } |
| i915_save_palette(dev, PIPE_B); |
| dev_priv->regfile.savePIPEBSTAT = I915_READ(_PIPEBSTAT); |
| |
| /* Fences */ |
| switch (INTEL_INFO(dev)->gen) { |
| case 7: |
| case 6: |
| for (i = 0; i < 16; i++) |
| dev_priv->regfile.saveFENCE[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8)); |
| break; |
| case 5: |
| case 4: |
| for (i = 0; i < 16; i++) |
| dev_priv->regfile.saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8)); |
| break; |
| case 3: |
| if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) |
| for (i = 0; i < 8; i++) |
| dev_priv->regfile.saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4)); |
| case 2: |
| for (i = 0; i < 8; i++) |
| dev_priv->regfile.saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4)); |
| break; |
| } |
| |
| /* CRT state */ |
| if (HAS_PCH_SPLIT(dev)) |
| dev_priv->regfile.saveADPA = I915_READ(PCH_ADPA); |
| else |
| dev_priv->regfile.saveADPA = I915_READ(ADPA); |
| |
| /* Display Port state */ |
| if (SUPPORTS_INTEGRATED_DP(dev)) { |
| dev_priv->regfile.saveDP_B = I915_READ(DP_B); |
| dev_priv->regfile.saveDP_C = I915_READ(DP_C); |
| dev_priv->regfile.saveDP_D = I915_READ(DP_D); |
| dev_priv->regfile.savePIPEA_GMCH_DATA_M = I915_READ(_PIPEA_DATA_M_G4X); |
| dev_priv->regfile.savePIPEB_GMCH_DATA_M = I915_READ(_PIPEB_DATA_M_G4X); |
| dev_priv->regfile.savePIPEA_GMCH_DATA_N = I915_READ(_PIPEA_DATA_N_G4X); |
| dev_priv->regfile.savePIPEB_GMCH_DATA_N = I915_READ(_PIPEB_DATA_N_G4X); |
| dev_priv->regfile.savePIPEA_DP_LINK_M = I915_READ(_PIPEA_LINK_M_G4X); |
| dev_priv->regfile.savePIPEB_DP_LINK_M = I915_READ(_PIPEB_LINK_M_G4X); |
| dev_priv->regfile.savePIPEA_DP_LINK_N = I915_READ(_PIPEA_LINK_N_G4X); |
| dev_priv->regfile.savePIPEB_DP_LINK_N = I915_READ(_PIPEB_LINK_N_G4X); |
| } |
| /* FIXME: regfile.save TV & SDVO state */ |
| |
| /* Panel fitter */ |
| if (!IS_I830(dev) && !IS_845G(dev) && !HAS_PCH_SPLIT(dev)) { |
| dev_priv->regfile.savePFIT_CONTROL = I915_READ(PFIT_CONTROL); |
| dev_priv->regfile.savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS); |
| } |
| |
| /* Backlight */ |
| if (INTEL_INFO(dev)->gen <= 4) |
| pci_read_config_byte(dev->pdev, PCI_LBPC, |
| &dev_priv->regfile.saveLBB); |
| |
| if (HAS_PCH_SPLIT(dev)) { |
| dev_priv->regfile.saveBLC_PWM_CTL = I915_READ(BLC_PWM_PCH_CTL1); |
| dev_priv->regfile.saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_PCH_CTL2); |
| dev_priv->regfile.saveBLC_CPU_PWM_CTL = I915_READ(BLC_PWM_CPU_CTL); |
| dev_priv->regfile.saveBLC_CPU_PWM_CTL2 = I915_READ(BLC_PWM_CPU_CTL2); |
| } else { |
| dev_priv->regfile.saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); |
| if (INTEL_INFO(dev)->gen >= 4) |
| dev_priv->regfile.saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2); |
| dev_priv->regfile.saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL); |
| } |
| |
| return; |
| } |
| |
| void i915_restore_display_reg(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int dpll_a_reg, fpa0_reg, fpa1_reg; |
| int dpll_b_reg, fpb0_reg, fpb1_reg; |
| int i; |
| |
| /* Backlight */ |
| if (INTEL_INFO(dev)->gen <= 4) |
| pci_write_config_byte(dev->pdev, PCI_LBPC, |
| dev_priv->regfile.saveLBB); |
| |
| if (HAS_PCH_SPLIT(dev)) { |
| I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->regfile.saveBLC_PWM_CTL); |
| I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->regfile.saveBLC_PWM_CTL2); |
| /* NOTE: BLC_PWM_CPU_CTL must be written after BLC_PWM_CPU_CTL2; |
| * otherwise we get blank eDP screen after S3 on some machines |
| */ |
| I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->regfile.saveBLC_CPU_PWM_CTL2); |
| I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->regfile.saveBLC_CPU_PWM_CTL); |
| } else { |
| if (INTEL_INFO(dev)->gen >= 4) |
| I915_WRITE(BLC_PWM_CTL2, dev_priv->regfile.saveBLC_PWM_CTL2); |
| I915_WRITE(BLC_PWM_CTL, dev_priv->regfile.saveBLC_PWM_CTL); |
| I915_WRITE(BLC_HIST_CTL, dev_priv->regfile.saveBLC_HIST_CTL); |
| } |
| |
| /* Panel fitter */ |
| if (!IS_I830(dev) && !IS_845G(dev) && !HAS_PCH_SPLIT(dev)) { |
| I915_WRITE(PFIT_PGM_RATIOS, dev_priv->regfile.savePFIT_PGM_RATIOS); |
| I915_WRITE(PFIT_CONTROL, dev_priv->regfile.savePFIT_CONTROL); |
| } |
| |
| /* Display port ratios (must be done before clock is set) */ |
| if (SUPPORTS_INTEGRATED_DP(dev)) { |
| I915_WRITE(_PIPEA_DATA_M_G4X, dev_priv->regfile.savePIPEA_GMCH_DATA_M); |
| I915_WRITE(_PIPEB_DATA_M_G4X, dev_priv->regfile.savePIPEB_GMCH_DATA_M); |
| I915_WRITE(_PIPEA_DATA_N_G4X, dev_priv->regfile.savePIPEA_GMCH_DATA_N); |
| I915_WRITE(_PIPEB_DATA_N_G4X, dev_priv->regfile.savePIPEB_GMCH_DATA_N); |
| I915_WRITE(_PIPEA_LINK_M_G4X, dev_priv->regfile.savePIPEA_DP_LINK_M); |
| I915_WRITE(_PIPEB_LINK_M_G4X, dev_priv->regfile.savePIPEB_DP_LINK_M); |
| I915_WRITE(_PIPEA_LINK_N_G4X, dev_priv->regfile.savePIPEA_DP_LINK_N); |
| I915_WRITE(_PIPEB_LINK_N_G4X, dev_priv->regfile.savePIPEB_DP_LINK_N); |
| } |
| |
| /* Fences */ |
| switch (INTEL_INFO(dev)->gen) { |
| case 7: |
| case 6: |
| for (i = 0; i < 16; i++) |
| I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 + (i * 8), dev_priv->regfile.saveFENCE[i]); |
| break; |
| case 5: |
| case 4: |
| for (i = 0; i < 16; i++) |
| I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->regfile.saveFENCE[i]); |
| break; |
| case 3: |
| case 2: |
| if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) |
| for (i = 0; i < 8; i++) |
| I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->regfile.saveFENCE[i+8]); |
| for (i = 0; i < 8; i++) |
| I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->regfile.saveFENCE[i]); |
| break; |
| } |
| |
| |
| if (HAS_PCH_SPLIT(dev)) { |
| dpll_a_reg = _PCH_DPLL_A; |
| dpll_b_reg = _PCH_DPLL_B; |
| fpa0_reg = _PCH_FPA0; |
| fpb0_reg = _PCH_FPB0; |
| fpa1_reg = _PCH_FPA1; |
| fpb1_reg = _PCH_FPB1; |
| } else { |
| dpll_a_reg = _DPLL_A; |
| dpll_b_reg = _DPLL_B; |
| fpa0_reg = _FPA0; |
| fpb0_reg = _FPB0; |
| fpa1_reg = _FPA1; |
| fpb1_reg = _FPB1; |
| } |
| |
| if (HAS_PCH_SPLIT(dev)) { |
| I915_WRITE(PCH_DREF_CONTROL, dev_priv->regfile.savePCH_DREF_CONTROL); |
| I915_WRITE(DISP_ARB_CTL, dev_priv->regfile.saveDISP_ARB_CTL); |
| } |
| |
| /* Pipe & plane A info */ |
| /* Prime the clock */ |
| if (dev_priv->regfile.saveDPLL_A & DPLL_VCO_ENABLE) { |
| I915_WRITE(dpll_a_reg, dev_priv->regfile.saveDPLL_A & |
| ~DPLL_VCO_ENABLE); |
| POSTING_READ(dpll_a_reg); |
| udelay(150); |
| } |
| I915_WRITE(fpa0_reg, dev_priv->regfile.saveFPA0); |
| I915_WRITE(fpa1_reg, dev_priv->regfile.saveFPA1); |
| /* Actually enable it */ |
| I915_WRITE(dpll_a_reg, dev_priv->regfile.saveDPLL_A); |
| POSTING_READ(dpll_a_reg); |
| udelay(150); |
| if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) { |
| I915_WRITE(_DPLL_A_MD, dev_priv->regfile.saveDPLL_A_MD); |
| POSTING_READ(_DPLL_A_MD); |
| } |
| udelay(150); |
| |
| /* Restore mode */ |
| I915_WRITE(_HTOTAL_A, dev_priv->regfile.saveHTOTAL_A); |
| I915_WRITE(_HBLANK_A, dev_priv->regfile.saveHBLANK_A); |
| I915_WRITE(_HSYNC_A, dev_priv->regfile.saveHSYNC_A); |
| I915_WRITE(_VTOTAL_A, dev_priv->regfile.saveVTOTAL_A); |
| I915_WRITE(_VBLANK_A, dev_priv->regfile.saveVBLANK_A); |
| I915_WRITE(_VSYNC_A, dev_priv->regfile.saveVSYNC_A); |
| if (!HAS_PCH_SPLIT(dev)) |
| I915_WRITE(_BCLRPAT_A, dev_priv->regfile.saveBCLRPAT_A); |
| |
| if (HAS_PCH_SPLIT(dev)) { |
| I915_WRITE(_PIPEA_DATA_M1, dev_priv->regfile.savePIPEA_DATA_M1); |
| I915_WRITE(_PIPEA_DATA_N1, dev_priv->regfile.savePIPEA_DATA_N1); |
| I915_WRITE(_PIPEA_LINK_M1, dev_priv->regfile.savePIPEA_LINK_M1); |
| I915_WRITE(_PIPEA_LINK_N1, dev_priv->regfile.savePIPEA_LINK_N1); |
| |
| I915_WRITE(_FDI_RXA_CTL, dev_priv->regfile.saveFDI_RXA_CTL); |
| I915_WRITE(_FDI_TXA_CTL, dev_priv->regfile.saveFDI_TXA_CTL); |
| |
| I915_WRITE(_PFA_CTL_1, dev_priv->regfile.savePFA_CTL_1); |
| I915_WRITE(_PFA_WIN_SZ, dev_priv->regfile.savePFA_WIN_SZ); |
| I915_WRITE(_PFA_WIN_POS, dev_priv->regfile.savePFA_WIN_POS); |
| |
| I915_WRITE(_PCH_TRANSACONF, dev_priv->regfile.saveTRANSACONF); |
| I915_WRITE(_PCH_TRANS_HTOTAL_A, dev_priv->regfile.saveTRANS_HTOTAL_A); |
| I915_WRITE(_PCH_TRANS_HBLANK_A, dev_priv->regfile.saveTRANS_HBLANK_A); |
| I915_WRITE(_PCH_TRANS_HSYNC_A, dev_priv->regfile.saveTRANS_HSYNC_A); |
| I915_WRITE(_PCH_TRANS_VTOTAL_A, dev_priv->regfile.saveTRANS_VTOTAL_A); |
| I915_WRITE(_PCH_TRANS_VBLANK_A, dev_priv->regfile.saveTRANS_VBLANK_A); |
| I915_WRITE(_PCH_TRANS_VSYNC_A, dev_priv->regfile.saveTRANS_VSYNC_A); |
| } |
| |
| /* Restore plane info */ |
| I915_WRITE(_DSPASIZE, dev_priv->regfile.saveDSPASIZE); |
| I915_WRITE(_DSPAPOS, dev_priv->regfile.saveDSPAPOS); |
| I915_WRITE(_PIPEASRC, dev_priv->regfile.savePIPEASRC); |
| I915_WRITE(_DSPAADDR, dev_priv->regfile.saveDSPAADDR); |
| I915_WRITE(_DSPASTRIDE, dev_priv->regfile.saveDSPASTRIDE); |
| if (INTEL_INFO(dev)->gen >= 4) { |
| I915_WRITE(_DSPASURF, dev_priv->regfile.saveDSPASURF); |
| I915_WRITE(_DSPATILEOFF, dev_priv->regfile.saveDSPATILEOFF); |
| } |
| |
| I915_WRITE(_PIPEACONF, dev_priv->regfile.savePIPEACONF); |
| |
| i915_restore_palette(dev, PIPE_A); |
| /* Enable the plane */ |
| I915_WRITE(_DSPACNTR, dev_priv->regfile.saveDSPACNTR); |
| I915_WRITE(_DSPAADDR, I915_READ(_DSPAADDR)); |
| |
| /* Pipe & plane B info */ |
| if (dev_priv->regfile.saveDPLL_B & DPLL_VCO_ENABLE) { |
| I915_WRITE(dpll_b_reg, dev_priv->regfile.saveDPLL_B & |
| ~DPLL_VCO_ENABLE); |
| POSTING_READ(dpll_b_reg); |
| udelay(150); |
| } |
| I915_WRITE(fpb0_reg, dev_priv->regfile.saveFPB0); |
| I915_WRITE(fpb1_reg, dev_priv->regfile.saveFPB1); |
| /* Actually enable it */ |
| I915_WRITE(dpll_b_reg, dev_priv->regfile.saveDPLL_B); |
| POSTING_READ(dpll_b_reg); |
| udelay(150); |
| if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) { |
| I915_WRITE(_DPLL_B_MD, dev_priv->regfile.saveDPLL_B_MD); |
| POSTING_READ(_DPLL_B_MD); |
| } |
| udelay(150); |
| |
| /* Restore mode */ |
| I915_WRITE(_HTOTAL_B, dev_priv->regfile.saveHTOTAL_B); |
| I915_WRITE(_HBLANK_B, dev_priv->regfile.saveHBLANK_B); |
| I915_WRITE(_HSYNC_B, dev_priv->regfile.saveHSYNC_B); |
| I915_WRITE(_VTOTAL_B, dev_priv->regfile.saveVTOTAL_B); |
| I915_WRITE(_VBLANK_B, dev_priv->regfile.saveVBLANK_B); |
| I915_WRITE(_VSYNC_B, dev_priv->regfile.saveVSYNC_B); |
| if (!HAS_PCH_SPLIT(dev)) |
| I915_WRITE(_BCLRPAT_B, dev_priv->regfile.saveBCLRPAT_B); |
| |
| if (HAS_PCH_SPLIT(dev)) { |
| I915_WRITE(_PIPEB_DATA_M1, dev_priv->regfile.savePIPEB_DATA_M1); |
| I915_WRITE(_PIPEB_DATA_N1, dev_priv->regfile.savePIPEB_DATA_N1); |
| I915_WRITE(_PIPEB_LINK_M1, dev_priv->regfile.savePIPEB_LINK_M1); |
| I915_WRITE(_PIPEB_LINK_N1, dev_priv->regfile.savePIPEB_LINK_N1); |
| |
| I915_WRITE(_FDI_RXB_CTL, dev_priv->regfile.saveFDI_RXB_CTL); |
| I915_WRITE(_FDI_TXB_CTL, dev_priv->regfile.saveFDI_TXB_CTL); |
| |
| I915_WRITE(_PFB_CTL_1, dev_priv->regfile.savePFB_CTL_1); |
| I915_WRITE(_PFB_WIN_SZ, dev_priv->regfile.savePFB_WIN_SZ); |
| I915_WRITE(_PFB_WIN_POS, dev_priv->regfile.savePFB_WIN_POS); |
| |
| I915_WRITE(_PCH_TRANSBCONF, dev_priv->regfile.saveTRANSBCONF); |
| I915_WRITE(_PCH_TRANS_HTOTAL_B, dev_priv->regfile.saveTRANS_HTOTAL_B); |
| I915_WRITE(_PCH_TRANS_HBLANK_B, dev_priv->regfile.saveTRANS_HBLANK_B); |
| I915_WRITE(_PCH_TRANS_HSYNC_B, dev_priv->regfile.saveTRANS_HSYNC_B); |
| I915_WRITE(_PCH_TRANS_VTOTAL_B, dev_priv->regfile.saveTRANS_VTOTAL_B); |
| I915_WRITE(_PCH_TRANS_VBLANK_B, dev_priv->regfile.saveTRANS_VBLANK_B); |
| I915_WRITE(_PCH_TRANS_VSYNC_B, dev_priv->regfile.saveTRANS_VSYNC_B); |
| } |
| |
| /* Restore plane info */ |
| I915_WRITE(_DSPBSIZE, dev_priv->regfile.saveDSPBSIZE); |
| I915_WRITE(_DSPBPOS, dev_priv->regfile.saveDSPBPOS); |
| I915_WRITE(_PIPEBSRC, dev_priv->regfile.savePIPEBSRC); |
| I915_WRITE(_DSPBADDR, dev_priv->regfile.saveDSPBADDR); |
| I915_WRITE(_DSPBSTRIDE, dev_priv->regfile.saveDSPBSTRIDE); |
| if (INTEL_INFO(dev)->gen >= 4) { |
| I915_WRITE(_DSPBSURF, dev_priv->regfile.saveDSPBSURF); |
| I915_WRITE(_DSPBTILEOFF, dev_priv->regfile.saveDSPBTILEOFF); |
| } |
| |
| I915_WRITE(_PIPEBCONF, dev_priv->regfile.savePIPEBCONF); |
| |
| i915_restore_palette(dev, PIPE_B); |
| /* Enable the plane */ |
| I915_WRITE(_DSPBCNTR, dev_priv->regfile.saveDSPBCNTR); |
| I915_WRITE(_DSPBADDR, I915_READ(_DSPBADDR)); |
| |
| /* Cursor state */ |
| I915_WRITE(_CURAPOS, dev_priv->regfile.saveCURAPOS); |
| I915_WRITE(_CURACNTR, dev_priv->regfile.saveCURACNTR); |
| I915_WRITE(_CURABASE, dev_priv->regfile.saveCURABASE); |
| I915_WRITE(_CURBPOS, dev_priv->regfile.saveCURBPOS); |
| I915_WRITE(_CURBCNTR, dev_priv->regfile.saveCURBCNTR); |
| I915_WRITE(_CURBBASE, dev_priv->regfile.saveCURBBASE); |
| if (IS_GEN2(dev)) |
| I915_WRITE(CURSIZE, dev_priv->regfile.saveCURSIZE); |
| |
| /* CRT state */ |
| if (HAS_PCH_SPLIT(dev)) |
| I915_WRITE(PCH_ADPA, dev_priv->regfile.saveADPA); |
| else |
| I915_WRITE(ADPA, dev_priv->regfile.saveADPA); |
| |
| /* Display Port state */ |
| if (SUPPORTS_INTEGRATED_DP(dev)) { |
| I915_WRITE(DP_B, dev_priv->regfile.saveDP_B); |
| I915_WRITE(DP_C, dev_priv->regfile.saveDP_C); |
| I915_WRITE(DP_D, dev_priv->regfile.saveDP_D); |
| } |
| /* FIXME: restore TV & SDVO state */ |
| |
| return; |
| } |