| /* |
| * ST's LPC Watchdog |
| * |
| * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved |
| * |
| * Author: David Paris <david.paris@st.com> for STMicroelectronics |
| * Lee Jones <lee.jones@linaro.org> for STMicroelectronics |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public Licence |
| * as published by the Free Software Foundation; either version |
| * 2 of the Licence, or (at your option) any later version. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/watchdog.h> |
| |
| #include <dt-bindings/mfd/st-lpc.h> |
| |
| /* Low Power Alarm */ |
| #define LPC_LPA_LSB_OFF 0x410 |
| #define LPC_LPA_START_OFF 0x418 |
| |
| /* LPC as WDT */ |
| #define LPC_WDT_OFF 0x510 |
| |
| static struct watchdog_device st_wdog_dev; |
| |
| struct st_wdog_syscfg { |
| unsigned int reset_type_reg; |
| unsigned int reset_type_mask; |
| unsigned int enable_reg; |
| unsigned int enable_mask; |
| }; |
| |
| struct st_wdog { |
| void __iomem *base; |
| struct device *dev; |
| struct regmap *regmap; |
| struct st_wdog_syscfg *syscfg; |
| struct clk *clk; |
| unsigned long clkrate; |
| bool warm_reset; |
| }; |
| |
| static struct st_wdog_syscfg stid127_syscfg = { |
| .reset_type_reg = 0x004, |
| .reset_type_mask = BIT(2), |
| .enable_reg = 0x000, |
| .enable_mask = BIT(2), |
| }; |
| |
| static struct st_wdog_syscfg stih415_syscfg = { |
| .reset_type_reg = 0x0B8, |
| .reset_type_mask = BIT(6), |
| .enable_reg = 0x0B4, |
| .enable_mask = BIT(7), |
| }; |
| |
| static struct st_wdog_syscfg stih416_syscfg = { |
| .reset_type_reg = 0x88C, |
| .reset_type_mask = BIT(6), |
| .enable_reg = 0x888, |
| .enable_mask = BIT(7), |
| }; |
| |
| static struct st_wdog_syscfg stih407_syscfg = { |
| .enable_reg = 0x204, |
| .enable_mask = BIT(19), |
| }; |
| |
| static const struct of_device_id st_wdog_match[] = { |
| { |
| .compatible = "st,stih407-lpc", |
| .data = &stih407_syscfg, |
| }, |
| { |
| .compatible = "st,stih416-lpc", |
| .data = &stih416_syscfg, |
| }, |
| { |
| .compatible = "st,stih415-lpc", |
| .data = &stih415_syscfg, |
| }, |
| { |
| .compatible = "st,stid127-lpc", |
| .data = &stid127_syscfg, |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, st_wdog_match); |
| |
| static void st_wdog_setup(struct st_wdog *st_wdog, bool enable) |
| { |
| /* Type of watchdog reset - 0: Cold 1: Warm */ |
| if (st_wdog->syscfg->reset_type_reg) |
| regmap_update_bits(st_wdog->regmap, |
| st_wdog->syscfg->reset_type_reg, |
| st_wdog->syscfg->reset_type_mask, |
| st_wdog->warm_reset); |
| |
| /* Mask/unmask watchdog reset */ |
| regmap_update_bits(st_wdog->regmap, |
| st_wdog->syscfg->enable_reg, |
| st_wdog->syscfg->enable_mask, |
| enable ? 0 : st_wdog->syscfg->enable_mask); |
| } |
| |
| static void st_wdog_load_timer(struct st_wdog *st_wdog, unsigned int timeout) |
| { |
| unsigned long clkrate = st_wdog->clkrate; |
| |
| writel_relaxed(timeout * clkrate, st_wdog->base + LPC_LPA_LSB_OFF); |
| writel_relaxed(1, st_wdog->base + LPC_LPA_START_OFF); |
| } |
| |
| static int st_wdog_start(struct watchdog_device *wdd) |
| { |
| struct st_wdog *st_wdog = watchdog_get_drvdata(wdd); |
| |
| writel_relaxed(1, st_wdog->base + LPC_WDT_OFF); |
| |
| return 0; |
| } |
| |
| static int st_wdog_stop(struct watchdog_device *wdd) |
| { |
| struct st_wdog *st_wdog = watchdog_get_drvdata(wdd); |
| |
| writel_relaxed(0, st_wdog->base + LPC_WDT_OFF); |
| |
| return 0; |
| } |
| |
| static int st_wdog_set_timeout(struct watchdog_device *wdd, |
| unsigned int timeout) |
| { |
| struct st_wdog *st_wdog = watchdog_get_drvdata(wdd); |
| |
| wdd->timeout = timeout; |
| st_wdog_load_timer(st_wdog, timeout); |
| |
| return 0; |
| } |
| |
| static int st_wdog_keepalive(struct watchdog_device *wdd) |
| { |
| struct st_wdog *st_wdog = watchdog_get_drvdata(wdd); |
| |
| st_wdog_load_timer(st_wdog, wdd->timeout); |
| |
| return 0; |
| } |
| |
| static const struct watchdog_info st_wdog_info = { |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, |
| .identity = "ST LPC WDT", |
| }; |
| |
| static const struct watchdog_ops st_wdog_ops = { |
| .owner = THIS_MODULE, |
| .start = st_wdog_start, |
| .stop = st_wdog_stop, |
| .ping = st_wdog_keepalive, |
| .set_timeout = st_wdog_set_timeout, |
| }; |
| |
| static struct watchdog_device st_wdog_dev = { |
| .info = &st_wdog_info, |
| .ops = &st_wdog_ops, |
| }; |
| |
| static int st_wdog_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *match; |
| struct device_node *np = pdev->dev.of_node; |
| struct st_wdog *st_wdog; |
| struct regmap *regmap; |
| struct resource *res; |
| struct clk *clk; |
| void __iomem *base; |
| uint32_t mode; |
| int ret; |
| |
| ret = of_property_read_u32(np, "st,lpc-mode", &mode); |
| if (ret) { |
| dev_err(&pdev->dev, "An LPC mode must be provided\n"); |
| return -EINVAL; |
| } |
| |
| /* LPC can either run as a Clocksource or in RTC or WDT mode */ |
| if (mode != ST_LPC_MODE_WDT) |
| return -ENODEV; |
| |
| st_wdog = devm_kzalloc(&pdev->dev, sizeof(*st_wdog), GFP_KERNEL); |
| if (!st_wdog) |
| return -ENOMEM; |
| |
| match = of_match_device(st_wdog_match, &pdev->dev); |
| if (!match) { |
| dev_err(&pdev->dev, "Couldn't match device\n"); |
| return -ENODEV; |
| } |
| st_wdog->syscfg = (struct st_wdog_syscfg *)match->data; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); |
| if (IS_ERR(regmap)) { |
| dev_err(&pdev->dev, "No syscfg phandle specified\n"); |
| return PTR_ERR(regmap); |
| } |
| |
| clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(clk)) { |
| dev_err(&pdev->dev, "Unable to request clock\n"); |
| return PTR_ERR(clk); |
| } |
| |
| st_wdog->dev = &pdev->dev; |
| st_wdog->base = base; |
| st_wdog->clk = clk; |
| st_wdog->regmap = regmap; |
| st_wdog->warm_reset = of_property_read_bool(np, "st,warm_reset"); |
| st_wdog->clkrate = clk_get_rate(st_wdog->clk); |
| |
| if (!st_wdog->clkrate) { |
| dev_err(&pdev->dev, "Unable to fetch clock rate\n"); |
| return -EINVAL; |
| } |
| st_wdog_dev.max_timeout = 0xFFFFFFFF / st_wdog->clkrate; |
| |
| ret = clk_prepare_enable(clk); |
| if (ret) { |
| dev_err(&pdev->dev, "Unable to enable clock\n"); |
| return ret; |
| } |
| |
| watchdog_set_drvdata(&st_wdog_dev, st_wdog); |
| watchdog_set_nowayout(&st_wdog_dev, WATCHDOG_NOWAYOUT); |
| |
| /* Init Watchdog timeout with value in DT */ |
| ret = watchdog_init_timeout(&st_wdog_dev, 0, &pdev->dev); |
| if (ret) { |
| dev_err(&pdev->dev, "Unable to initialise watchdog timeout\n"); |
| clk_disable_unprepare(clk); |
| return ret; |
| } |
| |
| ret = watchdog_register_device(&st_wdog_dev); |
| if (ret) { |
| dev_err(&pdev->dev, "Unable to register watchdog\n"); |
| clk_disable_unprepare(clk); |
| return ret; |
| } |
| |
| st_wdog_setup(st_wdog, true); |
| |
| dev_info(&pdev->dev, "LPC Watchdog driver registered, reset type is %s", |
| st_wdog->warm_reset ? "warm" : "cold"); |
| |
| return ret; |
| } |
| |
| static int st_wdog_remove(struct platform_device *pdev) |
| { |
| struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev); |
| |
| st_wdog_setup(st_wdog, false); |
| watchdog_unregister_device(&st_wdog_dev); |
| clk_disable_unprepare(st_wdog->clk); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int st_wdog_suspend(struct device *dev) |
| { |
| struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev); |
| |
| if (watchdog_active(&st_wdog_dev)) |
| st_wdog_stop(&st_wdog_dev); |
| |
| st_wdog_setup(st_wdog, false); |
| |
| clk_disable(st_wdog->clk); |
| |
| return 0; |
| } |
| |
| static int st_wdog_resume(struct device *dev) |
| { |
| struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev); |
| int ret; |
| |
| ret = clk_enable(st_wdog->clk); |
| if (ret) { |
| dev_err(dev, "Unable to re-enable clock\n"); |
| watchdog_unregister_device(&st_wdog_dev); |
| clk_unprepare(st_wdog->clk); |
| return ret; |
| } |
| |
| st_wdog_setup(st_wdog, true); |
| |
| if (watchdog_active(&st_wdog_dev)) { |
| st_wdog_load_timer(st_wdog, st_wdog_dev.timeout); |
| st_wdog_start(&st_wdog_dev); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(st_wdog_pm_ops, |
| st_wdog_suspend, |
| st_wdog_resume); |
| |
| static struct platform_driver st_wdog_driver = { |
| .driver = { |
| .name = "st-lpc-wdt", |
| .pm = &st_wdog_pm_ops, |
| .of_match_table = st_wdog_match, |
| }, |
| .probe = st_wdog_probe, |
| .remove = st_wdog_remove, |
| }; |
| module_platform_driver(st_wdog_driver); |
| |
| MODULE_AUTHOR("David Paris <david.paris@st.com>"); |
| MODULE_DESCRIPTION("ST LPC Watchdog Driver"); |
| MODULE_LICENSE("GPL"); |