| /* | 
 |  * Copyright (c) 2008, 2009 open80211s Ltd. | 
 |  * Authors:    Luis Carlos Cobo <luisca@cozybit.com> | 
 |  * 	       Javier Cardona <javier@cozybit.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/slab.h> | 
 | #include <asm/unaligned.h> | 
 | #include "ieee80211_i.h" | 
 | #include "mesh.h" | 
 |  | 
 | #define TMR_RUNNING_HK	0 | 
 | #define TMR_RUNNING_MP	1 | 
 | #define TMR_RUNNING_MPR	2 | 
 |  | 
 | int mesh_allocated; | 
 | static struct kmem_cache *rm_cache; | 
 |  | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt) | 
 | { | 
 | 	return (mgmt->u.action.u.mesh_action.action_code == | 
 | 			WLAN_MESH_ACTION_HWMP_PATH_SELECTION); | 
 | } | 
 | #else | 
 | bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt) | 
 | { return false; } | 
 | #endif | 
 |  | 
 | void ieee80211s_init(void) | 
 | { | 
 | 	mesh_pathtbl_init(); | 
 | 	mesh_allocated = 1; | 
 | 	rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry), | 
 | 				     0, 0, NULL); | 
 | } | 
 |  | 
 | void ieee80211s_stop(void) | 
 | { | 
 | 	mesh_pathtbl_unregister(); | 
 | 	kmem_cache_destroy(rm_cache); | 
 | } | 
 |  | 
 | static void ieee80211_mesh_housekeeping_timer(unsigned long data) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = (void *) data; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 |  | 
 | 	set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags); | 
 |  | 
 | 	if (local->quiescing) { | 
 | 		set_bit(TMR_RUNNING_HK, &ifmsh->timers_running); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ieee80211_queue_work(&local->hw, &sdata->work); | 
 | } | 
 |  | 
 | /** | 
 |  * mesh_matches_local - check if the config of a mesh point matches ours | 
 |  * | 
 |  * @sdata: local mesh subif | 
 |  * @ie: information elements of a management frame from the mesh peer | 
 |  * | 
 |  * This function checks if the mesh configuration of a mesh point matches the | 
 |  * local mesh configuration, i.e. if both nodes belong to the same mesh network. | 
 |  */ | 
 | bool mesh_matches_local(struct ieee80211_sub_if_data *sdata, | 
 | 			struct ieee802_11_elems *ie) | 
 | { | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	u32 basic_rates = 0; | 
 | 	enum nl80211_channel_type sta_channel_type = NL80211_CHAN_NO_HT; | 
 |  | 
 | 	/* | 
 | 	 * As support for each feature is added, check for matching | 
 | 	 * - On mesh config capabilities | 
 | 	 *   - Power Save Support En | 
 | 	 *   - Sync support enabled | 
 | 	 *   - Sync support active | 
 | 	 *   - Sync support required from peer | 
 | 	 *   - MDA enabled | 
 | 	 * - Power management control on fc | 
 | 	 */ | 
 | 	if (!(ifmsh->mesh_id_len == ie->mesh_id_len && | 
 | 	     memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 && | 
 | 	     (ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) && | 
 | 	     (ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) && | 
 | 	     (ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) && | 
 | 	     (ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) && | 
 | 	     (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth))) | 
 | 		goto mismatch; | 
 |  | 
 | 	ieee80211_sta_get_rates(local, ie, local->oper_channel->band, | 
 | 				&basic_rates); | 
 |  | 
 | 	if (sdata->vif.bss_conf.basic_rates != basic_rates) | 
 | 		goto mismatch; | 
 |  | 
 | 	if (ie->ht_operation) | 
 | 		sta_channel_type = | 
 | 			ieee80211_ht_oper_to_channel_type(ie->ht_operation); | 
 |  | 
 | 	/* Disallow HT40+/- mismatch */ | 
 | 	if (ie->ht_operation && | 
 | 	    (sdata->vif.bss_conf.channel_type == NL80211_CHAN_HT40MINUS || | 
 | 	     sdata->vif.bss_conf.channel_type == NL80211_CHAN_HT40PLUS) && | 
 | 	    (sta_channel_type == NL80211_CHAN_HT40MINUS || | 
 | 	     sta_channel_type == NL80211_CHAN_HT40PLUS) && | 
 | 	    sdata->vif.bss_conf.channel_type != sta_channel_type) | 
 | 		goto mismatch; | 
 |  | 
 | 	return true; | 
 | mismatch: | 
 | 	return false; | 
 | } | 
 |  | 
 | /** | 
 |  * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links | 
 |  * | 
 |  * @ie: information elements of a management frame from the mesh peer | 
 |  */ | 
 | bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie) | 
 | { | 
 | 	return (ie->mesh_config->meshconf_cap & | 
 | 	    MESHCONF_CAPAB_ACCEPT_PLINKS) != 0; | 
 | } | 
 |  | 
 | /** | 
 |  * mesh_accept_plinks_update - update accepting_plink in local mesh beacons | 
 |  * | 
 |  * @sdata: mesh interface in which mesh beacons are going to be updated | 
 |  * | 
 |  * Returns: beacon changed flag if the beacon content changed. | 
 |  */ | 
 | u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	bool free_plinks; | 
 | 	u32 changed = 0; | 
 |  | 
 | 	/* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0, | 
 | 	 * the mesh interface might be able to establish plinks with peers that | 
 | 	 * are already on the table but are not on PLINK_ESTAB state. However, | 
 | 	 * in general the mesh interface is not accepting peer link requests | 
 | 	 * from new peers, and that must be reflected in the beacon | 
 | 	 */ | 
 | 	free_plinks = mesh_plink_availables(sdata); | 
 |  | 
 | 	if (free_plinks != sdata->u.mesh.accepting_plinks) { | 
 | 		sdata->u.mesh.accepting_plinks = free_plinks; | 
 | 		changed = BSS_CHANGED_BEACON; | 
 | 	} | 
 |  | 
 | 	return changed; | 
 | } | 
 |  | 
 | int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL); | 
 | 	if (!sdata->u.mesh.rmc) | 
 | 		return -ENOMEM; | 
 | 	sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1; | 
 | 	for (i = 0; i < RMC_BUCKETS; i++) | 
 | 		INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i].list); | 
 | 	return 0; | 
 | } | 
 |  | 
 | void mesh_rmc_free(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct mesh_rmc *rmc = sdata->u.mesh.rmc; | 
 | 	struct rmc_entry *p, *n; | 
 | 	int i; | 
 |  | 
 | 	if (!sdata->u.mesh.rmc) | 
 | 		return; | 
 |  | 
 | 	for (i = 0; i < RMC_BUCKETS; i++) | 
 | 		list_for_each_entry_safe(p, n, &rmc->bucket[i].list, list) { | 
 | 			list_del(&p->list); | 
 | 			kmem_cache_free(rm_cache, p); | 
 | 		} | 
 |  | 
 | 	kfree(rmc); | 
 | 	sdata->u.mesh.rmc = NULL; | 
 | } | 
 |  | 
 | /** | 
 |  * mesh_rmc_check - Check frame in recent multicast cache and add if absent. | 
 |  * | 
 |  * @sa:		source address | 
 |  * @mesh_hdr:	mesh_header | 
 |  * | 
 |  * Returns: 0 if the frame is not in the cache, nonzero otherwise. | 
 |  * | 
 |  * Checks using the source address and the mesh sequence number if we have | 
 |  * received this frame lately. If the frame is not in the cache, it is added to | 
 |  * it. | 
 |  */ | 
 | int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr, | 
 | 		   struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct mesh_rmc *rmc = sdata->u.mesh.rmc; | 
 | 	u32 seqnum = 0; | 
 | 	int entries = 0; | 
 | 	u8 idx; | 
 | 	struct rmc_entry *p, *n; | 
 |  | 
 | 	/* Don't care about endianness since only match matters */ | 
 | 	memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum)); | 
 | 	idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask; | 
 | 	list_for_each_entry_safe(p, n, &rmc->bucket[idx].list, list) { | 
 | 		++entries; | 
 | 		if (time_after(jiffies, p->exp_time) || | 
 | 				(entries == RMC_QUEUE_MAX_LEN)) { | 
 | 			list_del(&p->list); | 
 | 			kmem_cache_free(rm_cache, p); | 
 | 			--entries; | 
 | 		} else if ((seqnum == p->seqnum) && | 
 | 			   (ether_addr_equal(sa, p->sa))) | 
 | 			return -1; | 
 | 	} | 
 |  | 
 | 	p = kmem_cache_alloc(rm_cache, GFP_ATOMIC); | 
 | 	if (!p) | 
 | 		return 0; | 
 |  | 
 | 	p->seqnum = seqnum; | 
 | 	p->exp_time = jiffies + RMC_TIMEOUT; | 
 | 	memcpy(p->sa, sa, ETH_ALEN); | 
 | 	list_add(&p->list, &rmc->bucket[idx].list); | 
 | 	return 0; | 
 | } | 
 |  | 
 | int | 
 | mesh_add_meshconf_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 | 	u8 *pos, neighbors; | 
 | 	u8 meshconf_len = sizeof(struct ieee80211_meshconf_ie); | 
 |  | 
 | 	if (skb_tailroom(skb) < 2 + meshconf_len) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	pos = skb_put(skb, 2 + meshconf_len); | 
 | 	*pos++ = WLAN_EID_MESH_CONFIG; | 
 | 	*pos++ = meshconf_len; | 
 |  | 
 | 	/* Active path selection protocol ID */ | 
 | 	*pos++ = ifmsh->mesh_pp_id; | 
 | 	/* Active path selection metric ID   */ | 
 | 	*pos++ = ifmsh->mesh_pm_id; | 
 | 	/* Congestion control mode identifier */ | 
 | 	*pos++ = ifmsh->mesh_cc_id; | 
 | 	/* Synchronization protocol identifier */ | 
 | 	*pos++ = ifmsh->mesh_sp_id; | 
 | 	/* Authentication Protocol identifier */ | 
 | 	*pos++ = ifmsh->mesh_auth_id; | 
 | 	/* Mesh Formation Info - number of neighbors */ | 
 | 	neighbors = atomic_read(&ifmsh->mshstats.estab_plinks); | 
 | 	/* Number of neighbor mesh STAs or 15 whichever is smaller */ | 
 | 	neighbors = (neighbors > 15) ? 15 : neighbors; | 
 | 	*pos++ = neighbors << 1; | 
 | 	/* Mesh capability */ | 
 | 	*pos = MESHCONF_CAPAB_FORWARDING; | 
 | 	*pos |= ifmsh->accepting_plinks ? | 
 | 	    MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00; | 
 | 	*pos++ |= ifmsh->adjusting_tbtt ? | 
 | 	    MESHCONF_CAPAB_TBTT_ADJUSTING : 0x00; | 
 | 	*pos++ = 0x00; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int | 
 | mesh_add_meshid_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 | 	u8 *pos; | 
 |  | 
 | 	if (skb_tailroom(skb) < 2 + ifmsh->mesh_id_len) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	pos = skb_put(skb, 2 + ifmsh->mesh_id_len); | 
 | 	*pos++ = WLAN_EID_MESH_ID; | 
 | 	*pos++ = ifmsh->mesh_id_len; | 
 | 	if (ifmsh->mesh_id_len) | 
 | 		memcpy(pos, ifmsh->mesh_id, ifmsh->mesh_id_len); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int | 
 | mesh_add_vendor_ies(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 | 	u8 offset, len; | 
 | 	const u8 *data; | 
 |  | 
 | 	if (!ifmsh->ie || !ifmsh->ie_len) | 
 | 		return 0; | 
 |  | 
 | 	/* fast-forward to vendor IEs */ | 
 | 	offset = ieee80211_ie_split_vendor(ifmsh->ie, ifmsh->ie_len, 0); | 
 |  | 
 | 	if (offset) { | 
 | 		len = ifmsh->ie_len - offset; | 
 | 		data = ifmsh->ie + offset; | 
 | 		if (skb_tailroom(skb) < len) | 
 | 			return -ENOMEM; | 
 | 		memcpy(skb_put(skb, len), data, len); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int | 
 | mesh_add_rsn_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 | 	u8 len = 0; | 
 | 	const u8 *data; | 
 |  | 
 | 	if (!ifmsh->ie || !ifmsh->ie_len) | 
 | 		return 0; | 
 |  | 
 | 	/* find RSN IE */ | 
 | 	data = ifmsh->ie; | 
 | 	while (data < ifmsh->ie + ifmsh->ie_len) { | 
 | 		if (*data == WLAN_EID_RSN) { | 
 | 			len = data[1] + 2; | 
 | 			break; | 
 | 		} | 
 | 		data++; | 
 | 	} | 
 |  | 
 | 	if (len) { | 
 | 		if (skb_tailroom(skb) < len) | 
 | 			return -ENOMEM; | 
 | 		memcpy(skb_put(skb, len), data, len); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int mesh_add_ds_params_ie(struct sk_buff *skb, | 
 | 			  struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_supported_band *sband; | 
 | 	struct ieee80211_channel *chan = local->oper_channel; | 
 | 	u8 *pos; | 
 |  | 
 | 	if (skb_tailroom(skb) < 3) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	sband = local->hw.wiphy->bands[chan->band]; | 
 | 	if (sband->band == IEEE80211_BAND_2GHZ) { | 
 | 		pos = skb_put(skb, 2 + 1); | 
 | 		*pos++ = WLAN_EID_DS_PARAMS; | 
 | 		*pos++ = 1; | 
 | 		*pos++ = ieee80211_frequency_to_channel(chan->center_freq); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int mesh_add_ht_cap_ie(struct sk_buff *skb, | 
 | 		       struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_supported_band *sband; | 
 | 	u8 *pos; | 
 |  | 
 | 	sband = local->hw.wiphy->bands[local->oper_channel->band]; | 
 | 	if (!sband->ht_cap.ht_supported || | 
 | 	    sdata->vif.bss_conf.channel_type == NL80211_CHAN_NO_HT) | 
 | 		return 0; | 
 |  | 
 | 	if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap)) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap)); | 
 | 	ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int mesh_add_ht_oper_ie(struct sk_buff *skb, | 
 | 			struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_channel *channel = local->oper_channel; | 
 | 	enum nl80211_channel_type channel_type = | 
 | 				sdata->vif.bss_conf.channel_type; | 
 | 	struct ieee80211_supported_band *sband = | 
 | 				local->hw.wiphy->bands[channel->band]; | 
 | 	struct ieee80211_sta_ht_cap *ht_cap = &sband->ht_cap; | 
 | 	u8 *pos; | 
 |  | 
 | 	if (!ht_cap->ht_supported || channel_type == NL80211_CHAN_NO_HT) | 
 | 		return 0; | 
 |  | 
 | 	if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_operation)) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_operation)); | 
 | 	ieee80211_ie_build_ht_oper(pos, ht_cap, channel, channel_type, | 
 | 				   sdata->vif.bss_conf.ht_operation_mode); | 
 |  | 
 | 	return 0; | 
 | } | 
 | static void ieee80211_mesh_path_timer(unsigned long data) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = | 
 | 		(struct ieee80211_sub_if_data *) data; | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 |  | 
 | 	if (local->quiescing) { | 
 | 		set_bit(TMR_RUNNING_MP, &ifmsh->timers_running); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ieee80211_queue_work(&local->hw, &sdata->work); | 
 | } | 
 |  | 
 | static void ieee80211_mesh_path_root_timer(unsigned long data) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = | 
 | 		(struct ieee80211_sub_if_data *) data; | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 |  | 
 | 	set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); | 
 |  | 
 | 	if (local->quiescing) { | 
 | 		set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ieee80211_queue_work(&local->hw, &sdata->work); | 
 | } | 
 |  | 
 | void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh) | 
 | { | 
 | 	if (ifmsh->mshcfg.dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT) | 
 | 		set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); | 
 | 	else { | 
 | 		clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); | 
 | 		/* stop running timer */ | 
 | 		del_timer_sync(&ifmsh->mesh_path_root_timer); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame | 
 |  * @hdr:    	802.11 frame header | 
 |  * @fc:		frame control field | 
 |  * @meshda:	destination address in the mesh | 
 |  * @meshsa:	source address address in the mesh.  Same as TA, as frame is | 
 |  *              locally originated. | 
 |  * | 
 |  * Return the length of the 802.11 (does not include a mesh control header) | 
 |  */ | 
 | int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, | 
 | 				  const u8 *meshda, const u8 *meshsa) | 
 | { | 
 | 	if (is_multicast_ether_addr(meshda)) { | 
 | 		*fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); | 
 | 		/* DA TA SA */ | 
 | 		memcpy(hdr->addr1, meshda, ETH_ALEN); | 
 | 		memcpy(hdr->addr2, meshsa, ETH_ALEN); | 
 | 		memcpy(hdr->addr3, meshsa, ETH_ALEN); | 
 | 		return 24; | 
 | 	} else { | 
 | 		*fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); | 
 | 		/* RA TA DA SA */ | 
 | 		memset(hdr->addr1, 0, ETH_ALEN);   /* RA is resolved later */ | 
 | 		memcpy(hdr->addr2, meshsa, ETH_ALEN); | 
 | 		memcpy(hdr->addr3, meshda, ETH_ALEN); | 
 | 		memcpy(hdr->addr4, meshsa, ETH_ALEN); | 
 | 		return 30; | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * ieee80211_new_mesh_header - create a new mesh header | 
 |  * @meshhdr:    uninitialized mesh header | 
 |  * @sdata:	mesh interface to be used | 
 |  * @addr4or5:   1st address in the ae header, which may correspond to address 4 | 
 |  *              (if addr6 is NULL) or address 5 (if addr6 is present). It may | 
 |  *              be NULL. | 
 |  * @addr6:	2nd address in the ae header, which corresponds to addr6 of the | 
 |  *              mesh frame | 
 |  * | 
 |  * Return the header length. | 
 |  */ | 
 | int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr, | 
 | 		struct ieee80211_sub_if_data *sdata, char *addr4or5, | 
 | 		char *addr6) | 
 | { | 
 | 	int aelen = 0; | 
 | 	BUG_ON(!addr4or5 && addr6); | 
 | 	memset(meshhdr, 0, sizeof(*meshhdr)); | 
 | 	meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL; | 
 | 	put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum); | 
 | 	sdata->u.mesh.mesh_seqnum++; | 
 | 	if (addr4or5 && !addr6) { | 
 | 		meshhdr->flags |= MESH_FLAGS_AE_A4; | 
 | 		aelen += ETH_ALEN; | 
 | 		memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN); | 
 | 	} else if (addr4or5 && addr6) { | 
 | 		meshhdr->flags |= MESH_FLAGS_AE_A5_A6; | 
 | 		aelen += 2 * ETH_ALEN; | 
 | 		memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN); | 
 | 		memcpy(meshhdr->eaddr2, addr6, ETH_ALEN); | 
 | 	} | 
 | 	return 6 + aelen; | 
 | } | 
 |  | 
 | static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata, | 
 | 			   struct ieee80211_if_mesh *ifmsh) | 
 | { | 
 | 	u32 changed; | 
 |  | 
 | 	ieee80211_sta_expire(sdata, IEEE80211_MESH_PEER_INACTIVITY_LIMIT); | 
 | 	mesh_path_expire(sdata); | 
 |  | 
 | 	changed = mesh_accept_plinks_update(sdata); | 
 | 	ieee80211_bss_info_change_notify(sdata, changed); | 
 |  | 
 | 	mod_timer(&ifmsh->housekeeping_timer, | 
 | 		  round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL)); | 
 | } | 
 |  | 
 | static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 | 	u32 interval; | 
 |  | 
 | 	mesh_path_tx_root_frame(sdata); | 
 |  | 
 | 	if (ifmsh->mshcfg.dot11MeshHWMPRootMode == IEEE80211_PROACTIVE_RANN) | 
 | 		interval = ifmsh->mshcfg.dot11MeshHWMPRannInterval; | 
 | 	else | 
 | 		interval = ifmsh->mshcfg.dot11MeshHWMProotInterval; | 
 |  | 
 | 	mod_timer(&ifmsh->mesh_path_root_timer, | 
 | 		  round_jiffies(TU_TO_EXP_TIME(interval))); | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 |  | 
 | 	/* use atomic bitops in case all timers fire at the same time */ | 
 |  | 
 | 	if (del_timer_sync(&ifmsh->housekeeping_timer)) | 
 | 		set_bit(TMR_RUNNING_HK, &ifmsh->timers_running); | 
 | 	if (del_timer_sync(&ifmsh->mesh_path_timer)) | 
 | 		set_bit(TMR_RUNNING_MP, &ifmsh->timers_running); | 
 | 	if (del_timer_sync(&ifmsh->mesh_path_root_timer)) | 
 | 		set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running); | 
 | } | 
 |  | 
 | void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 |  | 
 | 	if (test_and_clear_bit(TMR_RUNNING_HK, &ifmsh->timers_running)) | 
 | 		add_timer(&ifmsh->housekeeping_timer); | 
 | 	if (test_and_clear_bit(TMR_RUNNING_MP, &ifmsh->timers_running)) | 
 | 		add_timer(&ifmsh->mesh_path_timer); | 
 | 	if (test_and_clear_bit(TMR_RUNNING_MPR, &ifmsh->timers_running)) | 
 | 		add_timer(&ifmsh->mesh_path_root_timer); | 
 | 	ieee80211_mesh_root_setup(ifmsh); | 
 | } | 
 | #endif | 
 |  | 
 | void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 |  | 
 | 	local->fif_other_bss++; | 
 | 	/* mesh ifaces must set allmulti to forward mcast traffic */ | 
 | 	atomic_inc(&local->iff_allmultis); | 
 | 	ieee80211_configure_filter(local); | 
 |  | 
 | 	ifmsh->mesh_cc_id = 0;	/* Disabled */ | 
 | 	ifmsh->mesh_auth_id = 0;	/* Disabled */ | 
 | 	/* register sync ops from extensible synchronization framework */ | 
 | 	ifmsh->sync_ops = ieee80211_mesh_sync_ops_get(ifmsh->mesh_sp_id); | 
 | 	ifmsh->adjusting_tbtt = false; | 
 | 	ifmsh->sync_offset_clockdrift_max = 0; | 
 | 	set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags); | 
 | 	ieee80211_mesh_root_setup(ifmsh); | 
 | 	ieee80211_queue_work(&local->hw, &sdata->work); | 
 | 	sdata->vif.bss_conf.ht_operation_mode = | 
 | 				ifmsh->mshcfg.ht_opmode; | 
 | 	sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL; | 
 | 	sdata->vif.bss_conf.basic_rates = | 
 | 		ieee80211_mandatory_rates(sdata->local, | 
 | 					  sdata->local->oper_channel->band); | 
 | 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON | | 
 | 						BSS_CHANGED_BEACON_ENABLED | | 
 | 						BSS_CHANGED_HT | | 
 | 						BSS_CHANGED_BASIC_RATES | | 
 | 						BSS_CHANGED_BEACON_INT); | 
 |  | 
 | 	netif_carrier_on(sdata->dev); | 
 | } | 
 |  | 
 | void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 |  | 
 | 	netif_carrier_off(sdata->dev); | 
 |  | 
 | 	/* stop the beacon */ | 
 | 	ifmsh->mesh_id_len = 0; | 
 | 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); | 
 |  | 
 | 	/* flush STAs and mpaths on this iface */ | 
 | 	sta_info_flush(sdata->local, sdata); | 
 | 	mesh_path_flush_by_iface(sdata); | 
 |  | 
 | 	del_timer_sync(&sdata->u.mesh.housekeeping_timer); | 
 | 	del_timer_sync(&sdata->u.mesh.mesh_path_root_timer); | 
 | 	del_timer_sync(&sdata->u.mesh.mesh_path_timer); | 
 | 	/* | 
 | 	 * If the timer fired while we waited for it, it will have | 
 | 	 * requeued the work. Now the work will be running again | 
 | 	 * but will not rearm the timer again because it checks | 
 | 	 * whether the interface is running, which, at this point, | 
 | 	 * it no longer is. | 
 | 	 */ | 
 | 	cancel_work_sync(&sdata->work); | 
 |  | 
 | 	local->fif_other_bss--; | 
 | 	atomic_dec(&local->iff_allmultis); | 
 | 	ieee80211_configure_filter(local); | 
 |  | 
 | 	sdata->u.mesh.timers_running = 0; | 
 | } | 
 |  | 
 | static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, | 
 | 					u16 stype, | 
 | 					struct ieee80211_mgmt *mgmt, | 
 | 					size_t len, | 
 | 					struct ieee80211_rx_status *rx_status) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 | 	struct ieee802_11_elems elems; | 
 | 	struct ieee80211_channel *channel; | 
 | 	size_t baselen; | 
 | 	int freq; | 
 | 	enum ieee80211_band band = rx_status->band; | 
 |  | 
 | 	/* ignore ProbeResp to foreign address */ | 
 | 	if (stype == IEEE80211_STYPE_PROBE_RESP && | 
 | 	    !ether_addr_equal(mgmt->da, sdata->vif.addr)) | 
 | 		return; | 
 |  | 
 | 	baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; | 
 | 	if (baselen > len) | 
 | 		return; | 
 |  | 
 | 	ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, | 
 | 			       &elems); | 
 |  | 
 | 	/* ignore beacons from secure mesh peers if our security is off */ | 
 | 	if (elems.rsn_len && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) | 
 | 		return; | 
 |  | 
 | 	if (elems.ds_params && elems.ds_params_len == 1) | 
 | 		freq = ieee80211_channel_to_frequency(elems.ds_params[0], band); | 
 | 	else | 
 | 		freq = rx_status->freq; | 
 |  | 
 | 	channel = ieee80211_get_channel(local->hw.wiphy, freq); | 
 |  | 
 | 	if (!channel || channel->flags & IEEE80211_CHAN_DISABLED) | 
 | 		return; | 
 |  | 
 | 	if (elems.mesh_id && elems.mesh_config && | 
 | 	    mesh_matches_local(sdata, &elems)) | 
 | 		mesh_neighbour_update(sdata, mgmt->sa, &elems); | 
 |  | 
 | 	if (ifmsh->sync_ops) | 
 | 		ifmsh->sync_ops->rx_bcn_presp(sdata, | 
 | 			stype, mgmt, &elems, rx_status); | 
 | } | 
 |  | 
 | static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata, | 
 | 					  struct ieee80211_mgmt *mgmt, | 
 | 					  size_t len, | 
 | 					  struct ieee80211_rx_status *rx_status) | 
 | { | 
 | 	switch (mgmt->u.action.category) { | 
 | 	case WLAN_CATEGORY_SELF_PROTECTED: | 
 | 		switch (mgmt->u.action.u.self_prot.action_code) { | 
 | 		case WLAN_SP_MESH_PEERING_OPEN: | 
 | 		case WLAN_SP_MESH_PEERING_CLOSE: | 
 | 		case WLAN_SP_MESH_PEERING_CONFIRM: | 
 | 			mesh_rx_plink_frame(sdata, mgmt, len, rx_status); | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	case WLAN_CATEGORY_MESH_ACTION: | 
 | 		if (mesh_action_is_path_sel(mgmt)) | 
 | 			mesh_rx_path_sel_frame(sdata, mgmt, len); | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, | 
 | 				   struct sk_buff *skb) | 
 | { | 
 | 	struct ieee80211_rx_status *rx_status; | 
 | 	struct ieee80211_mgmt *mgmt; | 
 | 	u16 stype; | 
 |  | 
 | 	rx_status = IEEE80211_SKB_RXCB(skb); | 
 | 	mgmt = (struct ieee80211_mgmt *) skb->data; | 
 | 	stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE; | 
 |  | 
 | 	switch (stype) { | 
 | 	case IEEE80211_STYPE_PROBE_RESP: | 
 | 	case IEEE80211_STYPE_BEACON: | 
 | 		ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len, | 
 | 					    rx_status); | 
 | 		break; | 
 | 	case IEEE80211_STYPE_ACTION: | 
 | 		ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status); | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 |  | 
 | 	if (ifmsh->preq_queue_len && | 
 | 	    time_after(jiffies, | 
 | 		       ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval))) | 
 | 		mesh_path_start_discovery(sdata); | 
 |  | 
 | 	if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags)) | 
 | 		mesh_mpath_table_grow(); | 
 |  | 
 | 	if (test_and_clear_bit(MESH_WORK_GROW_MPP_TABLE, &ifmsh->wrkq_flags)) | 
 | 		mesh_mpp_table_grow(); | 
 |  | 
 | 	if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags)) | 
 | 		ieee80211_mesh_housekeeping(sdata, ifmsh); | 
 |  | 
 | 	if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags)) | 
 | 		ieee80211_mesh_rootpath(sdata); | 
 |  | 
 | 	if (test_and_clear_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags)) | 
 | 		mesh_sync_adjust_tbtt(sdata); | 
 | } | 
 |  | 
 | void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	list_for_each_entry_rcu(sdata, &local->interfaces, list) | 
 | 		if (ieee80211_vif_is_mesh(&sdata->vif)) | 
 | 			ieee80211_queue_work(&local->hw, &sdata->work); | 
 | 	rcu_read_unlock(); | 
 | } | 
 |  | 
 | void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 |  | 
 | 	setup_timer(&ifmsh->housekeeping_timer, | 
 | 		    ieee80211_mesh_housekeeping_timer, | 
 | 		    (unsigned long) sdata); | 
 |  | 
 | 	ifmsh->accepting_plinks = true; | 
 | 	ifmsh->preq_id = 0; | 
 | 	ifmsh->sn = 0; | 
 | 	ifmsh->num_gates = 0; | 
 | 	atomic_set(&ifmsh->mpaths, 0); | 
 | 	mesh_rmc_init(sdata); | 
 | 	ifmsh->last_preq = jiffies; | 
 | 	ifmsh->next_perr = jiffies; | 
 | 	/* Allocate all mesh structures when creating the first mesh interface. */ | 
 | 	if (!mesh_allocated) | 
 | 		ieee80211s_init(); | 
 | 	setup_timer(&ifmsh->mesh_path_timer, | 
 | 		    ieee80211_mesh_path_timer, | 
 | 		    (unsigned long) sdata); | 
 | 	setup_timer(&ifmsh->mesh_path_root_timer, | 
 | 		    ieee80211_mesh_path_root_timer, | 
 | 		    (unsigned long) sdata); | 
 | 	INIT_LIST_HEAD(&ifmsh->preq_queue.list); | 
 | 	spin_lock_init(&ifmsh->mesh_preq_queue_lock); | 
 | 	spin_lock_init(&ifmsh->sync_offset_lock); | 
 | } |