| /****************************************************************************** |
| * |
| * Module Name: utxface - External interfaces, miscellaneous utility functions |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2016, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #define EXPORT_ACPI_INTERFACES |
| |
| #include <acpi/acpi.h> |
| #include "accommon.h" |
| #include "acdebug.h" |
| |
| #define _COMPONENT ACPI_UTILITIES |
| ACPI_MODULE_NAME("utxface") |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_terminate |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Shutdown the ACPICA subsystem and release all resources. |
| * |
| ******************************************************************************/ |
| acpi_status __init acpi_terminate(void) |
| { |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(acpi_terminate); |
| |
| /* Shutdown and free all resources */ |
| |
| acpi_ut_subsystem_shutdown(); |
| |
| /* Free the mutex objects */ |
| |
| acpi_ut_mutex_terminate(); |
| |
| /* Now we can shutdown the OS-dependent layer */ |
| |
| status = acpi_os_terminate(); |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL_INIT(acpi_terminate) |
| |
| #ifndef ACPI_ASL_COMPILER |
| #ifdef ACPI_FUTURE_USAGE |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_subsystem_status |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: Status of the ACPI subsystem |
| * |
| * DESCRIPTION: Other drivers that use the ACPI subsystem should call this |
| * before making any other calls, to ensure the subsystem |
| * initialized successfully. |
| * |
| ******************************************************************************/ |
| acpi_status acpi_subsystem_status(void) |
| { |
| |
| if (acpi_gbl_startup_flags & ACPI_INITIALIZED_OK) { |
| return (AE_OK); |
| } else { |
| return (AE_ERROR); |
| } |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_subsystem_status) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_get_system_info |
| * |
| * PARAMETERS: out_buffer - A buffer to receive the resources for the |
| * device |
| * |
| * RETURN: status - the status of the call |
| * |
| * DESCRIPTION: This function is called to get information about the current |
| * state of the ACPI subsystem. It will return system information |
| * in the out_buffer. |
| * |
| * If the function fails an appropriate status will be returned |
| * and the value of out_buffer is undefined. |
| * |
| ******************************************************************************/ |
| acpi_status acpi_get_system_info(struct acpi_buffer * out_buffer) |
| { |
| struct acpi_system_info *info_ptr; |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(acpi_get_system_info); |
| |
| /* Parameter validation */ |
| |
| status = acpi_ut_validate_buffer(out_buffer); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* Validate/Allocate/Clear caller buffer */ |
| |
| status = |
| acpi_ut_initialize_buffer(out_buffer, |
| sizeof(struct acpi_system_info)); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* |
| * Populate the return buffer |
| */ |
| info_ptr = (struct acpi_system_info *)out_buffer->pointer; |
| info_ptr->acpi_ca_version = ACPI_CA_VERSION; |
| |
| /* System flags (ACPI capabilities) */ |
| |
| info_ptr->flags = ACPI_SYS_MODE_ACPI; |
| |
| /* Timer resolution - 24 or 32 bits */ |
| |
| if (acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) { |
| info_ptr->timer_resolution = 24; |
| } else { |
| info_ptr->timer_resolution = 32; |
| } |
| |
| /* Clear the reserved fields */ |
| |
| info_ptr->reserved1 = 0; |
| info_ptr->reserved2 = 0; |
| |
| /* Current debug levels */ |
| |
| info_ptr->debug_layer = acpi_dbg_layer; |
| info_ptr->debug_level = acpi_dbg_level; |
| |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_get_system_info) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_get_statistics |
| * |
| * PARAMETERS: stats - Where the statistics are returned |
| * |
| * RETURN: status - the status of the call |
| * |
| * DESCRIPTION: Get the contents of the various system counters |
| * |
| ******************************************************************************/ |
| acpi_status acpi_get_statistics(struct acpi_statistics *stats) |
| { |
| ACPI_FUNCTION_TRACE(acpi_get_statistics); |
| |
| /* Parameter validation */ |
| |
| if (!stats) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| /* Various interrupt-based event counters */ |
| |
| stats->sci_count = acpi_sci_count; |
| stats->gpe_count = acpi_gpe_count; |
| |
| memcpy(stats->fixed_event_count, acpi_fixed_event_count, |
| sizeof(acpi_fixed_event_count)); |
| |
| /* Other counters */ |
| |
| stats->method_count = acpi_method_count; |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_get_statistics) |
| |
| /***************************************************************************** |
| * |
| * FUNCTION: acpi_install_initialization_handler |
| * |
| * PARAMETERS: handler - Callback procedure |
| * function - Not (currently) used, see below |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Install an initialization handler |
| * |
| * TBD: When a second function is added, must save the Function also. |
| * |
| ****************************************************************************/ |
| acpi_status |
| acpi_install_initialization_handler(acpi_init_handler handler, u32 function) |
| { |
| |
| if (!handler) { |
| return (AE_BAD_PARAMETER); |
| } |
| |
| if (acpi_gbl_init_handler) { |
| return (AE_ALREADY_EXISTS); |
| } |
| |
| acpi_gbl_init_handler = handler; |
| return (AE_OK); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler) |
| #endif |
| |
| /***************************************************************************** |
| * |
| * FUNCTION: acpi_purge_cached_objects |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Empty all caches (delete the cached objects) |
| * |
| ****************************************************************************/ |
| acpi_status acpi_purge_cached_objects(void) |
| { |
| ACPI_FUNCTION_TRACE(acpi_purge_cached_objects); |
| |
| (void)acpi_os_purge_cache(acpi_gbl_state_cache); |
| (void)acpi_os_purge_cache(acpi_gbl_operand_cache); |
| (void)acpi_os_purge_cache(acpi_gbl_ps_node_cache); |
| (void)acpi_os_purge_cache(acpi_gbl_ps_node_ext_cache); |
| |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_purge_cached_objects) |
| |
| /***************************************************************************** |
| * |
| * FUNCTION: acpi_install_interface |
| * |
| * PARAMETERS: interface_name - The interface to install |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Install an _OSI interface to the global list |
| * |
| ****************************************************************************/ |
| acpi_status acpi_install_interface(acpi_string interface_name) |
| { |
| acpi_status status; |
| struct acpi_interface_info *interface_info; |
| |
| /* Parameter validation */ |
| |
| if (!interface_name || (strlen(interface_name) == 0)) { |
| return (AE_BAD_PARAMETER); |
| } |
| |
| status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| |
| /* Check if the interface name is already in the global list */ |
| |
| interface_info = acpi_ut_get_interface(interface_name); |
| if (interface_info) { |
| /* |
| * The interface already exists in the list. This is OK if the |
| * interface has been marked invalid -- just clear the bit. |
| */ |
| if (interface_info->flags & ACPI_OSI_INVALID) { |
| interface_info->flags &= ~ACPI_OSI_INVALID; |
| status = AE_OK; |
| } else { |
| status = AE_ALREADY_EXISTS; |
| } |
| } else { |
| /* New interface name, install into the global list */ |
| |
| status = acpi_ut_install_interface(interface_name); |
| } |
| |
| acpi_os_release_mutex(acpi_gbl_osi_mutex); |
| return (status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_install_interface) |
| |
| /***************************************************************************** |
| * |
| * FUNCTION: acpi_remove_interface |
| * |
| * PARAMETERS: interface_name - The interface to remove |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Remove an _OSI interface from the global list |
| * |
| ****************************************************************************/ |
| acpi_status acpi_remove_interface(acpi_string interface_name) |
| { |
| acpi_status status; |
| |
| /* Parameter validation */ |
| |
| if (!interface_name || (strlen(interface_name) == 0)) { |
| return (AE_BAD_PARAMETER); |
| } |
| |
| status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| |
| status = acpi_ut_remove_interface(interface_name); |
| |
| acpi_os_release_mutex(acpi_gbl_osi_mutex); |
| return (status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_remove_interface) |
| |
| /***************************************************************************** |
| * |
| * FUNCTION: acpi_install_interface_handler |
| * |
| * PARAMETERS: handler - The _OSI interface handler to install |
| * NULL means "remove existing handler" |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Install a handler for the predefined _OSI ACPI method. |
| * invoked during execution of the internal implementation of |
| * _OSI. A NULL handler simply removes any existing handler. |
| * |
| ****************************************************************************/ |
| acpi_status acpi_install_interface_handler(acpi_interface_handler handler) |
| { |
| acpi_status status; |
| |
| status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| |
| if (handler && acpi_gbl_interface_handler) { |
| status = AE_ALREADY_EXISTS; |
| } else { |
| acpi_gbl_interface_handler = handler; |
| } |
| |
| acpi_os_release_mutex(acpi_gbl_osi_mutex); |
| return (status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_install_interface_handler) |
| |
| /***************************************************************************** |
| * |
| * FUNCTION: acpi_update_interfaces |
| * |
| * PARAMETERS: action - Actions to be performed during the |
| * update |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Update _OSI interface strings, disabling or enabling OS vendor |
| * string or/and feature group strings. |
| * |
| ****************************************************************************/ |
| acpi_status acpi_update_interfaces(u8 action) |
| { |
| acpi_status status; |
| |
| status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| |
| status = acpi_ut_update_interfaces(action); |
| |
| acpi_os_release_mutex(acpi_gbl_osi_mutex); |
| return (status); |
| } |
| |
| /***************************************************************************** |
| * |
| * FUNCTION: acpi_check_address_range |
| * |
| * PARAMETERS: space_id - Address space ID |
| * address - Start address |
| * length - Length |
| * warn - TRUE if warning on overlap desired |
| * |
| * RETURN: Count of the number of conflicts detected. |
| * |
| * DESCRIPTION: Check if the input address range overlaps any of the |
| * ASL operation region address ranges. |
| * |
| ****************************************************************************/ |
| |
| u32 |
| acpi_check_address_range(acpi_adr_space_type space_id, |
| acpi_physical_address address, |
| acpi_size length, u8 warn) |
| { |
| u32 overlaps; |
| acpi_status status; |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); |
| if (ACPI_FAILURE(status)) { |
| return (0); |
| } |
| |
| overlaps = acpi_ut_check_address_range(space_id, address, |
| (u32)length, warn); |
| |
| (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); |
| return (overlaps); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_check_address_range) |
| #endif /* !ACPI_ASL_COMPILER */ |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_decode_pld_buffer |
| * |
| * PARAMETERS: in_buffer - Buffer returned by _PLD method |
| * length - Length of the in_buffer |
| * return_buffer - Where the decode buffer is returned |
| * |
| * RETURN: Status and the decoded _PLD buffer. User must deallocate |
| * the buffer via ACPI_FREE. |
| * |
| * DESCRIPTION: Decode the bit-packed buffer returned by the _PLD method into |
| * a local struct that is much more useful to an ACPI driver. |
| * |
| ******************************************************************************/ |
| acpi_status |
| acpi_decode_pld_buffer(u8 *in_buffer, |
| acpi_size length, struct acpi_pld_info ** return_buffer) |
| { |
| struct acpi_pld_info *pld_info; |
| u32 *buffer = ACPI_CAST_PTR(u32, in_buffer); |
| u32 dword; |
| |
| /* Parameter validation */ |
| |
| if (!in_buffer || !return_buffer |
| || (length < ACPI_PLD_REV1_BUFFER_SIZE)) { |
| return (AE_BAD_PARAMETER); |
| } |
| |
| pld_info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pld_info)); |
| if (!pld_info) { |
| return (AE_NO_MEMORY); |
| } |
| |
| /* First 32-bit DWord */ |
| |
| ACPI_MOVE_32_TO_32(&dword, &buffer[0]); |
| pld_info->revision = ACPI_PLD_GET_REVISION(&dword); |
| pld_info->ignore_color = ACPI_PLD_GET_IGNORE_COLOR(&dword); |
| pld_info->red = ACPI_PLD_GET_RED(&dword); |
| pld_info->green = ACPI_PLD_GET_GREEN(&dword); |
| pld_info->blue = ACPI_PLD_GET_BLUE(&dword); |
| |
| /* Second 32-bit DWord */ |
| |
| ACPI_MOVE_32_TO_32(&dword, &buffer[1]); |
| pld_info->width = ACPI_PLD_GET_WIDTH(&dword); |
| pld_info->height = ACPI_PLD_GET_HEIGHT(&dword); |
| |
| /* Third 32-bit DWord */ |
| |
| ACPI_MOVE_32_TO_32(&dword, &buffer[2]); |
| pld_info->user_visible = ACPI_PLD_GET_USER_VISIBLE(&dword); |
| pld_info->dock = ACPI_PLD_GET_DOCK(&dword); |
| pld_info->lid = ACPI_PLD_GET_LID(&dword); |
| pld_info->panel = ACPI_PLD_GET_PANEL(&dword); |
| pld_info->vertical_position = ACPI_PLD_GET_VERTICAL(&dword); |
| pld_info->horizontal_position = ACPI_PLD_GET_HORIZONTAL(&dword); |
| pld_info->shape = ACPI_PLD_GET_SHAPE(&dword); |
| pld_info->group_orientation = ACPI_PLD_GET_ORIENTATION(&dword); |
| pld_info->group_token = ACPI_PLD_GET_TOKEN(&dword); |
| pld_info->group_position = ACPI_PLD_GET_POSITION(&dword); |
| pld_info->bay = ACPI_PLD_GET_BAY(&dword); |
| |
| /* Fourth 32-bit DWord */ |
| |
| ACPI_MOVE_32_TO_32(&dword, &buffer[3]); |
| pld_info->ejectable = ACPI_PLD_GET_EJECTABLE(&dword); |
| pld_info->ospm_eject_required = ACPI_PLD_GET_OSPM_EJECT(&dword); |
| pld_info->cabinet_number = ACPI_PLD_GET_CABINET(&dword); |
| pld_info->card_cage_number = ACPI_PLD_GET_CARD_CAGE(&dword); |
| pld_info->reference = ACPI_PLD_GET_REFERENCE(&dword); |
| pld_info->rotation = ACPI_PLD_GET_ROTATION(&dword); |
| pld_info->order = ACPI_PLD_GET_ORDER(&dword); |
| |
| if (length >= ACPI_PLD_REV2_BUFFER_SIZE) { |
| |
| /* Fifth 32-bit DWord (Revision 2 of _PLD) */ |
| |
| ACPI_MOVE_32_TO_32(&dword, &buffer[4]); |
| pld_info->vertical_offset = ACPI_PLD_GET_VERT_OFFSET(&dword); |
| pld_info->horizontal_offset = ACPI_PLD_GET_HORIZ_OFFSET(&dword); |
| } |
| |
| *return_buffer = pld_info; |
| return (AE_OK); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_decode_pld_buffer) |