| /* |
| * ST spear1340-miphy driver |
| * |
| * Copyright (C) 2014 ST Microelectronics |
| * Pratyush Anand <pratyush.anand@st.com> |
| * Mohit Kumar <mohit.kumar@st.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/phy/phy.h> |
| #include <linux/regmap.h> |
| |
| /* SPEAr1340 Registers */ |
| /* Power Management Registers */ |
| #define SPEAR1340_PCM_CFG 0x100 |
| #define SPEAR1340_PCM_CFG_SATA_POWER_EN BIT(11) |
| #define SPEAR1340_PCM_WKUP_CFG 0x104 |
| #define SPEAR1340_SWITCH_CTR 0x108 |
| |
| #define SPEAR1340_PERIP1_SW_RST 0x318 |
| #define SPEAR1340_PERIP1_SW_RSATA BIT(12) |
| #define SPEAR1340_PERIP2_SW_RST 0x31C |
| #define SPEAR1340_PERIP3_SW_RST 0x320 |
| |
| /* PCIE - SATA configuration registers */ |
| #define SPEAR1340_PCIE_SATA_CFG 0x424 |
| /* PCIE CFG MASks */ |
| #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT BIT(11) |
| #define SPEAR1340_PCIE_CFG_POWERUP_RESET BIT(10) |
| #define SPEAR1340_PCIE_CFG_CORE_CLK_EN BIT(9) |
| #define SPEAR1340_PCIE_CFG_AUX_CLK_EN BIT(8) |
| #define SPEAR1340_SATA_CFG_TX_CLK_EN BIT(4) |
| #define SPEAR1340_SATA_CFG_RX_CLK_EN BIT(3) |
| #define SPEAR1340_SATA_CFG_POWERUP_RESET BIT(2) |
| #define SPEAR1340_SATA_CFG_PM_CLK_EN BIT(1) |
| #define SPEAR1340_PCIE_SATA_SEL_PCIE (0) |
| #define SPEAR1340_PCIE_SATA_SEL_SATA (1) |
| #define SPEAR1340_PCIE_SATA_CFG_MASK 0xF1F |
| #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \ |
| SPEAR1340_PCIE_CFG_AUX_CLK_EN | \ |
| SPEAR1340_PCIE_CFG_CORE_CLK_EN | \ |
| SPEAR1340_PCIE_CFG_POWERUP_RESET | \ |
| SPEAR1340_PCIE_CFG_DEVICE_PRESENT) |
| #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \ |
| SPEAR1340_SATA_CFG_PM_CLK_EN | \ |
| SPEAR1340_SATA_CFG_POWERUP_RESET | \ |
| SPEAR1340_SATA_CFG_RX_CLK_EN | \ |
| SPEAR1340_SATA_CFG_TX_CLK_EN) |
| |
| #define SPEAR1340_PCIE_MIPHY_CFG 0x428 |
| #define SPEAR1340_MIPHY_OSC_BYPASS_EXT BIT(31) |
| #define SPEAR1340_MIPHY_CLK_REF_DIV2 BIT(27) |
| #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27) |
| #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27) |
| #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0) |
| #define SPEAR1340_PCIE_MIPHY_CFG_MASK 0xF80000FF |
| #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \ |
| (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ |
| SPEAR1340_MIPHY_CLK_REF_DIV2 | \ |
| SPEAR1340_MIPHY_PLL_RATIO_TOP(60)) |
| #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \ |
| (SPEAR1340_MIPHY_PLL_RATIO_TOP(120)) |
| #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \ |
| (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ |
| SPEAR1340_MIPHY_PLL_RATIO_TOP(25)) |
| |
| enum spear1340_miphy_mode { |
| SATA, |
| PCIE, |
| }; |
| |
| struct spear1340_miphy_priv { |
| /* phy mode: 0 for SATA 1 for PCIe */ |
| enum spear1340_miphy_mode mode; |
| /* regmap for any soc specific misc registers */ |
| struct regmap *misc; |
| /* phy struct pointer */ |
| struct phy *phy; |
| }; |
| |
| static int spear1340_miphy_sata_init(struct spear1340_miphy_priv *priv) |
| { |
| regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, |
| SPEAR1340_PCIE_SATA_CFG_MASK, |
| SPEAR1340_SATA_CFG_VAL); |
| regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, |
| SPEAR1340_PCIE_MIPHY_CFG_MASK, |
| SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK); |
| /* Switch on sata power domain */ |
| regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG, |
| SPEAR1340_PCM_CFG_SATA_POWER_EN, |
| SPEAR1340_PCM_CFG_SATA_POWER_EN); |
| /* Wait for SATA power domain on */ |
| msleep(20); |
| |
| /* Disable PCIE SATA Controller reset */ |
| regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST, |
| SPEAR1340_PERIP1_SW_RSATA, 0); |
| /* Wait for SATA reset de-assert completion */ |
| msleep(20); |
| |
| return 0; |
| } |
| |
| static int spear1340_miphy_sata_exit(struct spear1340_miphy_priv *priv) |
| { |
| regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, |
| SPEAR1340_PCIE_SATA_CFG_MASK, 0); |
| regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, |
| SPEAR1340_PCIE_MIPHY_CFG_MASK, 0); |
| |
| /* Enable PCIE SATA Controller reset */ |
| regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST, |
| SPEAR1340_PERIP1_SW_RSATA, |
| SPEAR1340_PERIP1_SW_RSATA); |
| /* Wait for SATA power domain off */ |
| msleep(20); |
| /* Switch off sata power domain */ |
| regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG, |
| SPEAR1340_PCM_CFG_SATA_POWER_EN, 0); |
| /* Wait for SATA reset assert completion */ |
| msleep(20); |
| |
| return 0; |
| } |
| |
| static int spear1340_miphy_pcie_init(struct spear1340_miphy_priv *priv) |
| { |
| regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, |
| SPEAR1340_PCIE_MIPHY_CFG_MASK, |
| SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE); |
| regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, |
| SPEAR1340_PCIE_SATA_CFG_MASK, |
| SPEAR1340_PCIE_CFG_VAL); |
| |
| return 0; |
| } |
| |
| static int spear1340_miphy_pcie_exit(struct spear1340_miphy_priv *priv) |
| { |
| regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, |
| SPEAR1340_PCIE_MIPHY_CFG_MASK, 0); |
| regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, |
| SPEAR1340_PCIE_SATA_CFG_MASK, 0); |
| |
| return 0; |
| } |
| |
| static int spear1340_miphy_init(struct phy *phy) |
| { |
| struct spear1340_miphy_priv *priv = phy_get_drvdata(phy); |
| int ret = 0; |
| |
| if (priv->mode == SATA) |
| ret = spear1340_miphy_sata_init(priv); |
| else if (priv->mode == PCIE) |
| ret = spear1340_miphy_pcie_init(priv); |
| |
| return ret; |
| } |
| |
| static int spear1340_miphy_exit(struct phy *phy) |
| { |
| struct spear1340_miphy_priv *priv = phy_get_drvdata(phy); |
| int ret = 0; |
| |
| if (priv->mode == SATA) |
| ret = spear1340_miphy_sata_exit(priv); |
| else if (priv->mode == PCIE) |
| ret = spear1340_miphy_pcie_exit(priv); |
| |
| return ret; |
| } |
| |
| static const struct of_device_id spear1340_miphy_of_match[] = { |
| { .compatible = "st,spear1340-miphy" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, spear1340_miphy_of_match); |
| |
| static struct phy_ops spear1340_miphy_ops = { |
| .init = spear1340_miphy_init, |
| .exit = spear1340_miphy_exit, |
| .owner = THIS_MODULE, |
| }; |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int spear1340_miphy_suspend(struct device *dev) |
| { |
| struct spear1340_miphy_priv *priv = dev_get_drvdata(dev); |
| int ret = 0; |
| |
| if (priv->mode == SATA) |
| ret = spear1340_miphy_sata_exit(priv); |
| |
| return ret; |
| } |
| |
| static int spear1340_miphy_resume(struct device *dev) |
| { |
| struct spear1340_miphy_priv *priv = dev_get_drvdata(dev); |
| int ret = 0; |
| |
| if (priv->mode == SATA) |
| ret = spear1340_miphy_sata_init(priv); |
| |
| return ret; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(spear1340_miphy_pm_ops, spear1340_miphy_suspend, |
| spear1340_miphy_resume); |
| |
| static struct phy *spear1340_miphy_xlate(struct device *dev, |
| struct of_phandle_args *args) |
| { |
| struct spear1340_miphy_priv *priv = dev_get_drvdata(dev); |
| |
| if (args->args_count < 1) { |
| dev_err(dev, "DT did not pass correct no of args\n"); |
| return NULL; |
| } |
| |
| priv->mode = args->args[0]; |
| |
| if (priv->mode != SATA && priv->mode != PCIE) { |
| dev_err(dev, "DT did not pass correct phy mode\n"); |
| return NULL; |
| } |
| |
| return priv->phy; |
| } |
| |
| static int spear1340_miphy_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct spear1340_miphy_priv *priv; |
| struct phy_provider *phy_provider; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) { |
| dev_err(dev, "can't alloc spear1340_miphy private date memory\n"); |
| return -ENOMEM; |
| } |
| |
| priv->misc = |
| syscon_regmap_lookup_by_phandle(dev->of_node, "misc"); |
| if (IS_ERR(priv->misc)) { |
| dev_err(dev, "failed to find misc regmap\n"); |
| return PTR_ERR(priv->misc); |
| } |
| |
| priv->phy = devm_phy_create(dev, NULL, &spear1340_miphy_ops, NULL); |
| if (IS_ERR(priv->phy)) { |
| dev_err(dev, "failed to create SATA PCIe PHY\n"); |
| return PTR_ERR(priv->phy); |
| } |
| |
| dev_set_drvdata(dev, priv); |
| phy_set_drvdata(priv->phy, priv); |
| |
| phy_provider = |
| devm_of_phy_provider_register(dev, spear1340_miphy_xlate); |
| if (IS_ERR(phy_provider)) { |
| dev_err(dev, "failed to register phy provider\n"); |
| return PTR_ERR(phy_provider); |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver spear1340_miphy_driver = { |
| .probe = spear1340_miphy_probe, |
| .driver = { |
| .name = "spear1340-miphy", |
| .owner = THIS_MODULE, |
| .pm = &spear1340_miphy_pm_ops, |
| .of_match_table = of_match_ptr(spear1340_miphy_of_match), |
| }, |
| }; |
| |
| static int __init spear1340_miphy_phy_init(void) |
| { |
| return platform_driver_register(&spear1340_miphy_driver); |
| } |
| module_init(spear1340_miphy_phy_init); |
| |
| static void __exit spear1340_miphy_phy_exit(void) |
| { |
| platform_driver_unregister(&spear1340_miphy_driver); |
| } |
| module_exit(spear1340_miphy_phy_exit); |
| |
| MODULE_DESCRIPTION("ST SPEAR1340-MIPHY driver"); |
| MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>"); |
| MODULE_LICENSE("GPL v2"); |