| /* CAN driver for Geschwister Schneider USB/CAN devices |
| * and bytewerk.org candleLight USB CAN interfaces. |
| * |
| * Copyright (C) 2013-2016 Geschwister Schneider Technologie-, |
| * Entwicklungs- und Vertriebs UG (Haftungsbeschränkt). |
| * Copyright (C) 2016 Hubert Denkmair |
| * |
| * Many thanks to all socketcan devs! |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published |
| * by the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/signal.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/usb.h> |
| |
| #include <linux/can.h> |
| #include <linux/can/dev.h> |
| #include <linux/can/error.h> |
| |
| /* Device specific constants */ |
| #define USB_GSUSB_1_VENDOR_ID 0x1d50 |
| #define USB_GSUSB_1_PRODUCT_ID 0x606f |
| |
| #define USB_CANDLELIGHT_VENDOR_ID 0x1209 |
| #define USB_CANDLELIGHT_PRODUCT_ID 0x2323 |
| |
| #define GSUSB_ENDPOINT_IN 1 |
| #define GSUSB_ENDPOINT_OUT 2 |
| |
| /* Device specific constants */ |
| enum gs_usb_breq { |
| GS_USB_BREQ_HOST_FORMAT = 0, |
| GS_USB_BREQ_BITTIMING, |
| GS_USB_BREQ_MODE, |
| GS_USB_BREQ_BERR, |
| GS_USB_BREQ_BT_CONST, |
| GS_USB_BREQ_DEVICE_CONFIG, |
| GS_USB_BREQ_TIMESTAMP, |
| GS_USB_BREQ_IDENTIFY, |
| }; |
| |
| enum gs_can_mode { |
| /* reset a channel. turns it off */ |
| GS_CAN_MODE_RESET = 0, |
| /* starts a channel */ |
| GS_CAN_MODE_START |
| }; |
| |
| enum gs_can_state { |
| GS_CAN_STATE_ERROR_ACTIVE = 0, |
| GS_CAN_STATE_ERROR_WARNING, |
| GS_CAN_STATE_ERROR_PASSIVE, |
| GS_CAN_STATE_BUS_OFF, |
| GS_CAN_STATE_STOPPED, |
| GS_CAN_STATE_SLEEPING |
| }; |
| |
| enum gs_can_identify_mode { |
| GS_CAN_IDENTIFY_OFF = 0, |
| GS_CAN_IDENTIFY_ON |
| }; |
| |
| /* data types passed between host and device */ |
| struct gs_host_config { |
| u32 byte_order; |
| } __packed; |
| /* All data exchanged between host and device is exchanged in host byte order, |
| * thanks to the struct gs_host_config byte_order member, which is sent first |
| * to indicate the desired byte order. |
| */ |
| |
| struct gs_device_config { |
| u8 reserved1; |
| u8 reserved2; |
| u8 reserved3; |
| u8 icount; |
| u32 sw_version; |
| u32 hw_version; |
| } __packed; |
| |
| #define GS_CAN_MODE_NORMAL 0 |
| #define GS_CAN_MODE_LISTEN_ONLY BIT(0) |
| #define GS_CAN_MODE_LOOP_BACK BIT(1) |
| #define GS_CAN_MODE_TRIPLE_SAMPLE BIT(2) |
| #define GS_CAN_MODE_ONE_SHOT BIT(3) |
| |
| struct gs_device_mode { |
| u32 mode; |
| u32 flags; |
| } __packed; |
| |
| struct gs_device_state { |
| u32 state; |
| u32 rxerr; |
| u32 txerr; |
| } __packed; |
| |
| struct gs_device_bittiming { |
| u32 prop_seg; |
| u32 phase_seg1; |
| u32 phase_seg2; |
| u32 sjw; |
| u32 brp; |
| } __packed; |
| |
| struct gs_identify_mode { |
| u32 mode; |
| } __packed; |
| |
| #define GS_CAN_FEATURE_LISTEN_ONLY BIT(0) |
| #define GS_CAN_FEATURE_LOOP_BACK BIT(1) |
| #define GS_CAN_FEATURE_TRIPLE_SAMPLE BIT(2) |
| #define GS_CAN_FEATURE_ONE_SHOT BIT(3) |
| #define GS_CAN_FEATURE_HW_TIMESTAMP BIT(4) |
| #define GS_CAN_FEATURE_IDENTIFY BIT(5) |
| |
| struct gs_device_bt_const { |
| u32 feature; |
| u32 fclk_can; |
| u32 tseg1_min; |
| u32 tseg1_max; |
| u32 tseg2_min; |
| u32 tseg2_max; |
| u32 sjw_max; |
| u32 brp_min; |
| u32 brp_max; |
| u32 brp_inc; |
| } __packed; |
| |
| #define GS_CAN_FLAG_OVERFLOW 1 |
| |
| struct gs_host_frame { |
| u32 echo_id; |
| u32 can_id; |
| |
| u8 can_dlc; |
| u8 channel; |
| u8 flags; |
| u8 reserved; |
| |
| u8 data[8]; |
| } __packed; |
| /* The GS USB devices make use of the same flags and masks as in |
| * linux/can.h and linux/can/error.h, and no additional mapping is necessary. |
| */ |
| |
| /* Only send a max of GS_MAX_TX_URBS frames per channel at a time. */ |
| #define GS_MAX_TX_URBS 10 |
| /* Only launch a max of GS_MAX_RX_URBS usb requests at a time. */ |
| #define GS_MAX_RX_URBS 30 |
| /* Maximum number of interfaces the driver supports per device. |
| * Current hardware only supports 2 interfaces. The future may vary. |
| */ |
| #define GS_MAX_INTF 2 |
| |
| struct gs_tx_context { |
| struct gs_can *dev; |
| unsigned int echo_id; |
| }; |
| |
| struct gs_can { |
| struct can_priv can; /* must be the first member */ |
| |
| struct gs_usb *parent; |
| |
| struct net_device *netdev; |
| struct usb_device *udev; |
| struct usb_interface *iface; |
| |
| struct can_bittiming_const bt_const; |
| unsigned int channel; /* channel number */ |
| |
| /* This lock prevents a race condition between xmit and receive. */ |
| spinlock_t tx_ctx_lock; |
| struct gs_tx_context tx_context[GS_MAX_TX_URBS]; |
| |
| struct usb_anchor tx_submitted; |
| atomic_t active_tx_urbs; |
| }; |
| |
| /* usb interface struct */ |
| struct gs_usb { |
| struct gs_can *canch[GS_MAX_INTF]; |
| struct usb_anchor rx_submitted; |
| atomic_t active_channels; |
| struct usb_device *udev; |
| }; |
| |
| /* 'allocate' a tx context. |
| * returns a valid tx context or NULL if there is no space. |
| */ |
| static struct gs_tx_context *gs_alloc_tx_context(struct gs_can *dev) |
| { |
| int i = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->tx_ctx_lock, flags); |
| |
| for (; i < GS_MAX_TX_URBS; i++) { |
| if (dev->tx_context[i].echo_id == GS_MAX_TX_URBS) { |
| dev->tx_context[i].echo_id = i; |
| spin_unlock_irqrestore(&dev->tx_ctx_lock, flags); |
| return &dev->tx_context[i]; |
| } |
| } |
| |
| spin_unlock_irqrestore(&dev->tx_ctx_lock, flags); |
| return NULL; |
| } |
| |
| /* releases a tx context |
| */ |
| static void gs_free_tx_context(struct gs_tx_context *txc) |
| { |
| txc->echo_id = GS_MAX_TX_URBS; |
| } |
| |
| /* Get a tx context by id. |
| */ |
| static struct gs_tx_context *gs_get_tx_context(struct gs_can *dev, |
| unsigned int id) |
| { |
| unsigned long flags; |
| |
| if (id < GS_MAX_TX_URBS) { |
| spin_lock_irqsave(&dev->tx_ctx_lock, flags); |
| if (dev->tx_context[id].echo_id == id) { |
| spin_unlock_irqrestore(&dev->tx_ctx_lock, flags); |
| return &dev->tx_context[id]; |
| } |
| spin_unlock_irqrestore(&dev->tx_ctx_lock, flags); |
| } |
| return NULL; |
| } |
| |
| static int gs_cmd_reset(struct gs_usb *gsusb, struct gs_can *gsdev) |
| { |
| struct gs_device_mode *dm; |
| struct usb_interface *intf = gsdev->iface; |
| int rc; |
| |
| dm = kzalloc(sizeof(*dm), GFP_KERNEL); |
| if (!dm) |
| return -ENOMEM; |
| |
| dm->mode = GS_CAN_MODE_RESET; |
| |
| rc = usb_control_msg(interface_to_usbdev(intf), |
| usb_sndctrlpipe(interface_to_usbdev(intf), 0), |
| GS_USB_BREQ_MODE, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, |
| gsdev->channel, |
| 0, |
| dm, |
| sizeof(*dm), |
| 1000); |
| |
| kfree(dm); |
| |
| return rc; |
| } |
| |
| static void gs_update_state(struct gs_can *dev, struct can_frame *cf) |
| { |
| struct can_device_stats *can_stats = &dev->can.can_stats; |
| |
| if (cf->can_id & CAN_ERR_RESTARTED) { |
| dev->can.state = CAN_STATE_ERROR_ACTIVE; |
| can_stats->restarts++; |
| } else if (cf->can_id & CAN_ERR_BUSOFF) { |
| dev->can.state = CAN_STATE_BUS_OFF; |
| can_stats->bus_off++; |
| } else if (cf->can_id & CAN_ERR_CRTL) { |
| if ((cf->data[1] & CAN_ERR_CRTL_TX_WARNING) || |
| (cf->data[1] & CAN_ERR_CRTL_RX_WARNING)) { |
| dev->can.state = CAN_STATE_ERROR_WARNING; |
| can_stats->error_warning++; |
| } else if ((cf->data[1] & CAN_ERR_CRTL_TX_PASSIVE) || |
| (cf->data[1] & CAN_ERR_CRTL_RX_PASSIVE)) { |
| dev->can.state = CAN_STATE_ERROR_PASSIVE; |
| can_stats->error_passive++; |
| } else { |
| dev->can.state = CAN_STATE_ERROR_ACTIVE; |
| } |
| } |
| } |
| |
| static void gs_usb_receive_bulk_callback(struct urb *urb) |
| { |
| struct gs_usb *usbcan = urb->context; |
| struct gs_can *dev; |
| struct net_device *netdev; |
| int rc; |
| struct net_device_stats *stats; |
| struct gs_host_frame *hf = urb->transfer_buffer; |
| struct gs_tx_context *txc; |
| struct can_frame *cf; |
| struct sk_buff *skb; |
| |
| BUG_ON(!usbcan); |
| |
| switch (urb->status) { |
| case 0: /* success */ |
| break; |
| case -ENOENT: |
| case -ESHUTDOWN: |
| return; |
| default: |
| /* do not resubmit aborted urbs. eg: when device goes down */ |
| return; |
| } |
| |
| /* device reports out of range channel id */ |
| if (hf->channel >= GS_MAX_INTF) |
| goto resubmit_urb; |
| |
| dev = usbcan->canch[hf->channel]; |
| |
| netdev = dev->netdev; |
| stats = &netdev->stats; |
| |
| if (!netif_device_present(netdev)) |
| return; |
| |
| if (hf->echo_id == -1) { /* normal rx */ |
| skb = alloc_can_skb(dev->netdev, &cf); |
| if (!skb) |
| return; |
| |
| cf->can_id = hf->can_id; |
| |
| cf->can_dlc = get_can_dlc(hf->can_dlc); |
| memcpy(cf->data, hf->data, 8); |
| |
| /* ERROR frames tell us information about the controller */ |
| if (hf->can_id & CAN_ERR_FLAG) |
| gs_update_state(dev, cf); |
| |
| netdev->stats.rx_packets++; |
| netdev->stats.rx_bytes += hf->can_dlc; |
| |
| netif_rx(skb); |
| } else { /* echo_id == hf->echo_id */ |
| if (hf->echo_id >= GS_MAX_TX_URBS) { |
| netdev_err(netdev, |
| "Unexpected out of range echo id %d\n", |
| hf->echo_id); |
| goto resubmit_urb; |
| } |
| |
| netdev->stats.tx_packets++; |
| netdev->stats.tx_bytes += hf->can_dlc; |
| |
| txc = gs_get_tx_context(dev, hf->echo_id); |
| |
| /* bad devices send bad echo_ids. */ |
| if (!txc) { |
| netdev_err(netdev, |
| "Unexpected unused echo id %d\n", |
| hf->echo_id); |
| goto resubmit_urb; |
| } |
| |
| can_get_echo_skb(netdev, hf->echo_id); |
| |
| gs_free_tx_context(txc); |
| |
| netif_wake_queue(netdev); |
| } |
| |
| if (hf->flags & GS_CAN_FLAG_OVERFLOW) { |
| skb = alloc_can_err_skb(netdev, &cf); |
| if (!skb) |
| goto resubmit_urb; |
| |
| cf->can_id |= CAN_ERR_CRTL; |
| cf->can_dlc = CAN_ERR_DLC; |
| cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; |
| stats->rx_over_errors++; |
| stats->rx_errors++; |
| netif_rx(skb); |
| } |
| |
| resubmit_urb: |
| usb_fill_bulk_urb(urb, |
| usbcan->udev, |
| usb_rcvbulkpipe(usbcan->udev, GSUSB_ENDPOINT_IN), |
| hf, |
| sizeof(struct gs_host_frame), |
| gs_usb_receive_bulk_callback, |
| usbcan |
| ); |
| |
| rc = usb_submit_urb(urb, GFP_ATOMIC); |
| |
| /* USB failure take down all interfaces */ |
| if (rc == -ENODEV) { |
| for (rc = 0; rc < GS_MAX_INTF; rc++) { |
| if (usbcan->canch[rc]) |
| netif_device_detach(usbcan->canch[rc]->netdev); |
| } |
| } |
| } |
| |
| static int gs_usb_set_bittiming(struct net_device *netdev) |
| { |
| struct gs_can *dev = netdev_priv(netdev); |
| struct can_bittiming *bt = &dev->can.bittiming; |
| struct usb_interface *intf = dev->iface; |
| int rc; |
| struct gs_device_bittiming *dbt; |
| |
| dbt = kmalloc(sizeof(*dbt), GFP_KERNEL); |
| if (!dbt) |
| return -ENOMEM; |
| |
| dbt->prop_seg = bt->prop_seg; |
| dbt->phase_seg1 = bt->phase_seg1; |
| dbt->phase_seg2 = bt->phase_seg2; |
| dbt->sjw = bt->sjw; |
| dbt->brp = bt->brp; |
| |
| /* request bit timings */ |
| rc = usb_control_msg(interface_to_usbdev(intf), |
| usb_sndctrlpipe(interface_to_usbdev(intf), 0), |
| GS_USB_BREQ_BITTIMING, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, |
| dev->channel, |
| 0, |
| dbt, |
| sizeof(*dbt), |
| 1000); |
| |
| kfree(dbt); |
| |
| if (rc < 0) |
| dev_err(netdev->dev.parent, "Couldn't set bittimings (err=%d)", |
| rc); |
| |
| return rc; |
| } |
| |
| static void gs_usb_xmit_callback(struct urb *urb) |
| { |
| struct gs_tx_context *txc = urb->context; |
| struct gs_can *dev = txc->dev; |
| struct net_device *netdev = dev->netdev; |
| |
| if (urb->status) |
| netdev_info(netdev, "usb xmit fail %d\n", txc->echo_id); |
| |
| usb_free_coherent(urb->dev, |
| urb->transfer_buffer_length, |
| urb->transfer_buffer, |
| urb->transfer_dma); |
| |
| atomic_dec(&dev->active_tx_urbs); |
| |
| if (!netif_device_present(netdev)) |
| return; |
| |
| if (netif_queue_stopped(netdev)) |
| netif_wake_queue(netdev); |
| } |
| |
| static netdev_tx_t gs_can_start_xmit(struct sk_buff *skb, |
| struct net_device *netdev) |
| { |
| struct gs_can *dev = netdev_priv(netdev); |
| struct net_device_stats *stats = &dev->netdev->stats; |
| struct urb *urb; |
| struct gs_host_frame *hf; |
| struct can_frame *cf; |
| int rc; |
| unsigned int idx; |
| struct gs_tx_context *txc; |
| |
| if (can_dropped_invalid_skb(netdev, skb)) |
| return NETDEV_TX_OK; |
| |
| /* find an empty context to keep track of transmission */ |
| txc = gs_alloc_tx_context(dev); |
| if (!txc) |
| return NETDEV_TX_BUSY; |
| |
| /* create a URB, and a buffer for it */ |
| urb = usb_alloc_urb(0, GFP_ATOMIC); |
| if (!urb) |
| goto nomem_urb; |
| |
| hf = usb_alloc_coherent(dev->udev, sizeof(*hf), GFP_ATOMIC, |
| &urb->transfer_dma); |
| if (!hf) { |
| netdev_err(netdev, "No memory left for USB buffer\n"); |
| goto nomem_hf; |
| } |
| |
| idx = txc->echo_id; |
| |
| if (idx >= GS_MAX_TX_URBS) { |
| netdev_err(netdev, "Invalid tx context %d\n", idx); |
| goto badidx; |
| } |
| |
| hf->echo_id = idx; |
| hf->channel = dev->channel; |
| |
| cf = (struct can_frame *)skb->data; |
| |
| hf->can_id = cf->can_id; |
| hf->can_dlc = cf->can_dlc; |
| memcpy(hf->data, cf->data, cf->can_dlc); |
| |
| usb_fill_bulk_urb(urb, dev->udev, |
| usb_sndbulkpipe(dev->udev, GSUSB_ENDPOINT_OUT), |
| hf, |
| sizeof(*hf), |
| gs_usb_xmit_callback, |
| txc); |
| |
| urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| usb_anchor_urb(urb, &dev->tx_submitted); |
| |
| can_put_echo_skb(skb, netdev, idx); |
| |
| atomic_inc(&dev->active_tx_urbs); |
| |
| rc = usb_submit_urb(urb, GFP_ATOMIC); |
| if (unlikely(rc)) { /* usb send failed */ |
| atomic_dec(&dev->active_tx_urbs); |
| |
| can_free_echo_skb(netdev, idx); |
| gs_free_tx_context(txc); |
| |
| usb_unanchor_urb(urb); |
| usb_free_coherent(dev->udev, |
| sizeof(*hf), |
| hf, |
| urb->transfer_dma); |
| |
| if (rc == -ENODEV) { |
| netif_device_detach(netdev); |
| } else { |
| netdev_err(netdev, "usb_submit failed (err=%d)\n", rc); |
| stats->tx_dropped++; |
| } |
| } else { |
| /* Slow down tx path */ |
| if (atomic_read(&dev->active_tx_urbs) >= GS_MAX_TX_URBS) |
| netif_stop_queue(netdev); |
| } |
| |
| /* let usb core take care of this urb */ |
| usb_free_urb(urb); |
| |
| return NETDEV_TX_OK; |
| |
| badidx: |
| usb_free_coherent(dev->udev, |
| sizeof(*hf), |
| hf, |
| urb->transfer_dma); |
| nomem_hf: |
| usb_free_urb(urb); |
| |
| nomem_urb: |
| gs_free_tx_context(txc); |
| dev_kfree_skb(skb); |
| stats->tx_dropped++; |
| return NETDEV_TX_OK; |
| } |
| |
| static int gs_can_open(struct net_device *netdev) |
| { |
| struct gs_can *dev = netdev_priv(netdev); |
| struct gs_usb *parent = dev->parent; |
| int rc, i; |
| struct gs_device_mode *dm; |
| u32 ctrlmode; |
| |
| rc = open_candev(netdev); |
| if (rc) |
| return rc; |
| |
| if (atomic_add_return(1, &parent->active_channels) == 1) { |
| for (i = 0; i < GS_MAX_RX_URBS; i++) { |
| struct urb *urb; |
| u8 *buf; |
| |
| /* alloc rx urb */ |
| urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!urb) |
| return -ENOMEM; |
| |
| /* alloc rx buffer */ |
| buf = usb_alloc_coherent(dev->udev, |
| sizeof(struct gs_host_frame), |
| GFP_KERNEL, |
| &urb->transfer_dma); |
| if (!buf) { |
| netdev_err(netdev, |
| "No memory left for USB buffer\n"); |
| usb_free_urb(urb); |
| return -ENOMEM; |
| } |
| |
| /* fill, anchor, and submit rx urb */ |
| usb_fill_bulk_urb(urb, |
| dev->udev, |
| usb_rcvbulkpipe(dev->udev, |
| GSUSB_ENDPOINT_IN), |
| buf, |
| sizeof(struct gs_host_frame), |
| gs_usb_receive_bulk_callback, |
| parent); |
| urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| |
| usb_anchor_urb(urb, &parent->rx_submitted); |
| |
| rc = usb_submit_urb(urb, GFP_KERNEL); |
| if (rc) { |
| if (rc == -ENODEV) |
| netif_device_detach(dev->netdev); |
| |
| netdev_err(netdev, |
| "usb_submit failed (err=%d)\n", |
| rc); |
| |
| usb_unanchor_urb(urb); |
| break; |
| } |
| |
| /* Drop reference, |
| * USB core will take care of freeing it |
| */ |
| usb_free_urb(urb); |
| } |
| } |
| |
| dm = kmalloc(sizeof(*dm), GFP_KERNEL); |
| if (!dm) |
| return -ENOMEM; |
| |
| /* flags */ |
| ctrlmode = dev->can.ctrlmode; |
| dm->flags = 0; |
| |
| if (ctrlmode & CAN_CTRLMODE_LOOPBACK) |
| dm->flags |= GS_CAN_MODE_LOOP_BACK; |
| else if (ctrlmode & CAN_CTRLMODE_LISTENONLY) |
| dm->flags |= GS_CAN_MODE_LISTEN_ONLY; |
| |
| /* Controller is not allowed to retry TX |
| * this mode is unavailable on atmels uc3c hardware |
| */ |
| if (ctrlmode & CAN_CTRLMODE_ONE_SHOT) |
| dm->flags |= GS_CAN_MODE_ONE_SHOT; |
| |
| if (ctrlmode & CAN_CTRLMODE_3_SAMPLES) |
| dm->flags |= GS_CAN_MODE_TRIPLE_SAMPLE; |
| |
| /* finally start device */ |
| dm->mode = GS_CAN_MODE_START; |
| rc = usb_control_msg(interface_to_usbdev(dev->iface), |
| usb_sndctrlpipe(interface_to_usbdev(dev->iface), 0), |
| GS_USB_BREQ_MODE, |
| USB_DIR_OUT | USB_TYPE_VENDOR | |
| USB_RECIP_INTERFACE, |
| dev->channel, |
| 0, |
| dm, |
| sizeof(*dm), |
| 1000); |
| |
| if (rc < 0) { |
| netdev_err(netdev, "Couldn't start device (err=%d)\n", rc); |
| kfree(dm); |
| return rc; |
| } |
| |
| kfree(dm); |
| |
| dev->can.state = CAN_STATE_ERROR_ACTIVE; |
| |
| if (!(dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)) |
| netif_start_queue(netdev); |
| |
| return 0; |
| } |
| |
| static int gs_can_close(struct net_device *netdev) |
| { |
| int rc; |
| struct gs_can *dev = netdev_priv(netdev); |
| struct gs_usb *parent = dev->parent; |
| |
| netif_stop_queue(netdev); |
| |
| /* Stop polling */ |
| if (atomic_dec_and_test(&parent->active_channels)) |
| usb_kill_anchored_urbs(&parent->rx_submitted); |
| |
| /* Stop sending URBs */ |
| usb_kill_anchored_urbs(&dev->tx_submitted); |
| atomic_set(&dev->active_tx_urbs, 0); |
| |
| /* reset the device */ |
| rc = gs_cmd_reset(parent, dev); |
| if (rc < 0) |
| netdev_warn(netdev, "Couldn't shutdown device (err=%d)", rc); |
| |
| /* reset tx contexts */ |
| for (rc = 0; rc < GS_MAX_TX_URBS; rc++) { |
| dev->tx_context[rc].dev = dev; |
| dev->tx_context[rc].echo_id = GS_MAX_TX_URBS; |
| } |
| |
| /* close the netdev */ |
| close_candev(netdev); |
| |
| return 0; |
| } |
| |
| static const struct net_device_ops gs_usb_netdev_ops = { |
| .ndo_open = gs_can_open, |
| .ndo_stop = gs_can_close, |
| .ndo_start_xmit = gs_can_start_xmit, |
| .ndo_change_mtu = can_change_mtu, |
| }; |
| |
| static int gs_usb_set_identify(struct net_device *netdev, bool do_identify) |
| { |
| struct gs_can *dev = netdev_priv(netdev); |
| struct gs_identify_mode *imode; |
| int rc; |
| |
| imode = kmalloc(sizeof(*imode), GFP_KERNEL); |
| |
| if (!imode) |
| return -ENOMEM; |
| |
| if (do_identify) |
| imode->mode = GS_CAN_IDENTIFY_ON; |
| else |
| imode->mode = GS_CAN_IDENTIFY_OFF; |
| |
| rc = usb_control_msg(interface_to_usbdev(dev->iface), |
| usb_sndctrlpipe(interface_to_usbdev(dev->iface), |
| 0), |
| GS_USB_BREQ_IDENTIFY, |
| USB_DIR_OUT | USB_TYPE_VENDOR | |
| USB_RECIP_INTERFACE, |
| dev->channel, |
| 0, |
| imode, |
| sizeof(*imode), |
| 100); |
| |
| kfree(imode); |
| |
| return (rc > 0) ? 0 : rc; |
| } |
| |
| /* blink LED's for finding the this interface */ |
| static int gs_usb_set_phys_id(struct net_device *dev, |
| enum ethtool_phys_id_state state) |
| { |
| int rc = 0; |
| |
| switch (state) { |
| case ETHTOOL_ID_ACTIVE: |
| rc = gs_usb_set_identify(dev, GS_CAN_IDENTIFY_ON); |
| break; |
| case ETHTOOL_ID_INACTIVE: |
| rc = gs_usb_set_identify(dev, GS_CAN_IDENTIFY_OFF); |
| break; |
| default: |
| break; |
| } |
| |
| return rc; |
| } |
| |
| static const struct ethtool_ops gs_usb_ethtool_ops = { |
| .set_phys_id = gs_usb_set_phys_id, |
| }; |
| |
| static struct gs_can *gs_make_candev(unsigned int channel, |
| struct usb_interface *intf, |
| struct gs_device_config *dconf) |
| { |
| struct gs_can *dev; |
| struct net_device *netdev; |
| int rc; |
| struct gs_device_bt_const *bt_const; |
| |
| bt_const = kmalloc(sizeof(*bt_const), GFP_KERNEL); |
| if (!bt_const) |
| return ERR_PTR(-ENOMEM); |
| |
| /* fetch bit timing constants */ |
| rc = usb_control_msg(interface_to_usbdev(intf), |
| usb_rcvctrlpipe(interface_to_usbdev(intf), 0), |
| GS_USB_BREQ_BT_CONST, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, |
| channel, |
| 0, |
| bt_const, |
| sizeof(*bt_const), |
| 1000); |
| |
| if (rc < 0) { |
| dev_err(&intf->dev, |
| "Couldn't get bit timing const for channel (err=%d)\n", |
| rc); |
| kfree(bt_const); |
| return ERR_PTR(rc); |
| } |
| |
| /* create netdev */ |
| netdev = alloc_candev(sizeof(struct gs_can), GS_MAX_TX_URBS); |
| if (!netdev) { |
| dev_err(&intf->dev, "Couldn't allocate candev\n"); |
| kfree(bt_const); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| dev = netdev_priv(netdev); |
| |
| netdev->netdev_ops = &gs_usb_netdev_ops; |
| |
| netdev->flags |= IFF_ECHO; /* we support full roundtrip echo */ |
| |
| /* dev settup */ |
| strcpy(dev->bt_const.name, "gs_usb"); |
| dev->bt_const.tseg1_min = bt_const->tseg1_min; |
| dev->bt_const.tseg1_max = bt_const->tseg1_max; |
| dev->bt_const.tseg2_min = bt_const->tseg2_min; |
| dev->bt_const.tseg2_max = bt_const->tseg2_max; |
| dev->bt_const.sjw_max = bt_const->sjw_max; |
| dev->bt_const.brp_min = bt_const->brp_min; |
| dev->bt_const.brp_max = bt_const->brp_max; |
| dev->bt_const.brp_inc = bt_const->brp_inc; |
| |
| dev->udev = interface_to_usbdev(intf); |
| dev->iface = intf; |
| dev->netdev = netdev; |
| dev->channel = channel; |
| |
| init_usb_anchor(&dev->tx_submitted); |
| atomic_set(&dev->active_tx_urbs, 0); |
| spin_lock_init(&dev->tx_ctx_lock); |
| for (rc = 0; rc < GS_MAX_TX_URBS; rc++) { |
| dev->tx_context[rc].dev = dev; |
| dev->tx_context[rc].echo_id = GS_MAX_TX_URBS; |
| } |
| |
| /* can settup */ |
| dev->can.state = CAN_STATE_STOPPED; |
| dev->can.clock.freq = bt_const->fclk_can; |
| dev->can.bittiming_const = &dev->bt_const; |
| dev->can.do_set_bittiming = gs_usb_set_bittiming; |
| |
| dev->can.ctrlmode_supported = 0; |
| |
| if (bt_const->feature & GS_CAN_FEATURE_LISTEN_ONLY) |
| dev->can.ctrlmode_supported |= CAN_CTRLMODE_LISTENONLY; |
| |
| if (bt_const->feature & GS_CAN_FEATURE_LOOP_BACK) |
| dev->can.ctrlmode_supported |= CAN_CTRLMODE_LOOPBACK; |
| |
| if (bt_const->feature & GS_CAN_FEATURE_TRIPLE_SAMPLE) |
| dev->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; |
| |
| if (bt_const->feature & GS_CAN_FEATURE_ONE_SHOT) |
| dev->can.ctrlmode_supported |= CAN_CTRLMODE_ONE_SHOT; |
| |
| SET_NETDEV_DEV(netdev, &intf->dev); |
| |
| if (dconf->sw_version > 1) |
| if (bt_const->feature & GS_CAN_FEATURE_IDENTIFY) |
| netdev->ethtool_ops = &gs_usb_ethtool_ops; |
| |
| kfree(bt_const); |
| |
| rc = register_candev(dev->netdev); |
| if (rc) { |
| free_candev(dev->netdev); |
| dev_err(&intf->dev, "Couldn't register candev (err=%d)\n", rc); |
| return ERR_PTR(rc); |
| } |
| |
| return dev; |
| } |
| |
| static void gs_destroy_candev(struct gs_can *dev) |
| { |
| unregister_candev(dev->netdev); |
| usb_kill_anchored_urbs(&dev->tx_submitted); |
| free_candev(dev->netdev); |
| } |
| |
| static int gs_usb_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct gs_usb *dev; |
| int rc = -ENOMEM; |
| unsigned int icount, i; |
| struct gs_host_config *hconf; |
| struct gs_device_config *dconf; |
| |
| hconf = kmalloc(sizeof(*hconf), GFP_KERNEL); |
| if (!hconf) |
| return -ENOMEM; |
| |
| hconf->byte_order = 0x0000beef; |
| |
| /* send host config */ |
| rc = usb_control_msg(interface_to_usbdev(intf), |
| usb_sndctrlpipe(interface_to_usbdev(intf), 0), |
| GS_USB_BREQ_HOST_FORMAT, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, |
| 1, |
| intf->altsetting[0].desc.bInterfaceNumber, |
| hconf, |
| sizeof(*hconf), |
| 1000); |
| |
| kfree(hconf); |
| |
| if (rc < 0) { |
| dev_err(&intf->dev, "Couldn't send data format (err=%d)\n", |
| rc); |
| return rc; |
| } |
| |
| dconf = kmalloc(sizeof(*dconf), GFP_KERNEL); |
| if (!dconf) |
| return -ENOMEM; |
| |
| /* read device config */ |
| rc = usb_control_msg(interface_to_usbdev(intf), |
| usb_rcvctrlpipe(interface_to_usbdev(intf), 0), |
| GS_USB_BREQ_DEVICE_CONFIG, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, |
| 1, |
| intf->altsetting[0].desc.bInterfaceNumber, |
| dconf, |
| sizeof(*dconf), |
| 1000); |
| if (rc < 0) { |
| dev_err(&intf->dev, "Couldn't get device config: (err=%d)\n", |
| rc); |
| kfree(dconf); |
| return rc; |
| } |
| |
| icount = dconf->icount + 1; |
| dev_info(&intf->dev, "Configuring for %d interfaces\n", icount); |
| |
| if (icount > GS_MAX_INTF) { |
| dev_err(&intf->dev, |
| "Driver cannot handle more that %d CAN interfaces\n", |
| GS_MAX_INTF); |
| kfree(dconf); |
| return -EINVAL; |
| } |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) { |
| kfree(dconf); |
| return -ENOMEM; |
| } |
| |
| init_usb_anchor(&dev->rx_submitted); |
| |
| atomic_set(&dev->active_channels, 0); |
| |
| usb_set_intfdata(intf, dev); |
| dev->udev = interface_to_usbdev(intf); |
| |
| for (i = 0; i < icount; i++) { |
| dev->canch[i] = gs_make_candev(i, intf, dconf); |
| if (IS_ERR_OR_NULL(dev->canch[i])) { |
| /* save error code to return later */ |
| rc = PTR_ERR(dev->canch[i]); |
| |
| /* on failure destroy previously created candevs */ |
| icount = i; |
| for (i = 0; i < icount; i++) |
| gs_destroy_candev(dev->canch[i]); |
| |
| usb_kill_anchored_urbs(&dev->rx_submitted); |
| kfree(dconf); |
| kfree(dev); |
| return rc; |
| } |
| dev->canch[i]->parent = dev; |
| } |
| |
| kfree(dconf); |
| |
| return 0; |
| } |
| |
| static void gs_usb_disconnect(struct usb_interface *intf) |
| { |
| unsigned i; |
| struct gs_usb *dev = usb_get_intfdata(intf); |
| usb_set_intfdata(intf, NULL); |
| |
| if (!dev) { |
| dev_err(&intf->dev, "Disconnect (nodata)\n"); |
| return; |
| } |
| |
| for (i = 0; i < GS_MAX_INTF; i++) |
| if (dev->canch[i]) |
| gs_destroy_candev(dev->canch[i]); |
| |
| usb_kill_anchored_urbs(&dev->rx_submitted); |
| kfree(dev); |
| } |
| |
| static const struct usb_device_id gs_usb_table[] = { |
| { USB_DEVICE_INTERFACE_NUMBER(USB_GSUSB_1_VENDOR_ID, |
| USB_GSUSB_1_PRODUCT_ID, 0) }, |
| { USB_DEVICE_INTERFACE_NUMBER(USB_CANDLELIGHT_VENDOR_ID, |
| USB_CANDLELIGHT_PRODUCT_ID, 0) }, |
| {} /* Terminating entry */ |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, gs_usb_table); |
| |
| static struct usb_driver gs_usb_driver = { |
| .name = "gs_usb", |
| .probe = gs_usb_probe, |
| .disconnect = gs_usb_disconnect, |
| .id_table = gs_usb_table, |
| }; |
| |
| module_usb_driver(gs_usb_driver); |
| |
| MODULE_AUTHOR("Maximilian Schneider <mws@schneidersoft.net>"); |
| MODULE_DESCRIPTION( |
| "Socket CAN device driver for Geschwister Schneider Technologie-, " |
| "Entwicklungs- und Vertriebs UG. USB2.0 to CAN interfaces\n" |
| "and bytewerk.org candleLight USB CAN interfaces."); |
| MODULE_LICENSE("GPL v2"); |