| /* |
| * Module for the pnfs nfs4 file layout driver. |
| * Defines all I/O and Policy interface operations, plus code |
| * to register itself with the pNFS client. |
| * |
| * Copyright (c) 2002 |
| * The Regents of the University of Michigan |
| * All Rights Reserved |
| * |
| * Dean Hildebrand <dhildebz@umich.edu> |
| * |
| * Permission is granted to use, copy, create derivative works, and |
| * redistribute this software and such derivative works for any purpose, |
| * so long as the name of the University of Michigan is not used in |
| * any advertising or publicity pertaining to the use or distribution |
| * of this software without specific, written prior authorization. If |
| * the above copyright notice or any other identification of the |
| * University of Michigan is included in any copy of any portion of |
| * this software, then the disclaimer below must also be included. |
| * |
| * This software is provided as is, without representation or warranty |
| * of any kind either express or implied, including without limitation |
| * the implied warranties of merchantability, fitness for a particular |
| * purpose, or noninfringement. The Regents of the University of |
| * Michigan shall not be liable for any damages, including special, |
| * indirect, incidental, or consequential damages, with respect to any |
| * claim arising out of or in connection with the use of the software, |
| * even if it has been or is hereafter advised of the possibility of |
| * such damages. |
| */ |
| |
| #include <linux/nfs_fs.h> |
| #include <linux/nfs_page.h> |
| #include <linux/module.h> |
| |
| #include <linux/sunrpc/metrics.h> |
| |
| #include "internal.h" |
| #include "delegation.h" |
| #include "nfs4filelayout.h" |
| |
| #define NFSDBG_FACILITY NFSDBG_PNFS_LD |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Dean Hildebrand <dhildebz@umich.edu>"); |
| MODULE_DESCRIPTION("The NFSv4 file layout driver"); |
| |
| #define FILELAYOUT_POLL_RETRY_MAX (15*HZ) |
| |
| static loff_t |
| filelayout_get_dense_offset(struct nfs4_filelayout_segment *flseg, |
| loff_t offset) |
| { |
| u32 stripe_width = flseg->stripe_unit * flseg->dsaddr->stripe_count; |
| u64 stripe_no; |
| u32 rem; |
| |
| offset -= flseg->pattern_offset; |
| stripe_no = div_u64(offset, stripe_width); |
| div_u64_rem(offset, flseg->stripe_unit, &rem); |
| |
| return stripe_no * flseg->stripe_unit + rem; |
| } |
| |
| /* This function is used by the layout driver to calculate the |
| * offset of the file on the dserver based on whether the |
| * layout type is STRIPE_DENSE or STRIPE_SPARSE |
| */ |
| static loff_t |
| filelayout_get_dserver_offset(struct pnfs_layout_segment *lseg, loff_t offset) |
| { |
| struct nfs4_filelayout_segment *flseg = FILELAYOUT_LSEG(lseg); |
| |
| switch (flseg->stripe_type) { |
| case STRIPE_SPARSE: |
| return offset; |
| |
| case STRIPE_DENSE: |
| return filelayout_get_dense_offset(flseg, offset); |
| } |
| |
| BUG(); |
| } |
| |
| static int filelayout_async_handle_error(struct rpc_task *task, |
| struct nfs4_state *state, |
| struct nfs_client *clp, |
| int *reset) |
| { |
| struct nfs_server *mds_server = NFS_SERVER(state->inode); |
| struct nfs_client *mds_client = mds_server->nfs_client; |
| |
| if (task->tk_status >= 0) |
| return 0; |
| *reset = 0; |
| |
| switch (task->tk_status) { |
| /* MDS state errors */ |
| case -NFS4ERR_DELEG_REVOKED: |
| case -NFS4ERR_ADMIN_REVOKED: |
| case -NFS4ERR_BAD_STATEID: |
| nfs_remove_bad_delegation(state->inode); |
| case -NFS4ERR_OPENMODE: |
| nfs4_schedule_stateid_recovery(mds_server, state); |
| goto wait_on_recovery; |
| case -NFS4ERR_EXPIRED: |
| nfs4_schedule_stateid_recovery(mds_server, state); |
| nfs4_schedule_lease_recovery(mds_client); |
| goto wait_on_recovery; |
| /* DS session errors */ |
| case -NFS4ERR_BADSESSION: |
| case -NFS4ERR_BADSLOT: |
| case -NFS4ERR_BAD_HIGH_SLOT: |
| case -NFS4ERR_DEADSESSION: |
| case -NFS4ERR_CONN_NOT_BOUND_TO_SESSION: |
| case -NFS4ERR_SEQ_FALSE_RETRY: |
| case -NFS4ERR_SEQ_MISORDERED: |
| dprintk("%s ERROR %d, Reset session. Exchangeid " |
| "flags 0x%x\n", __func__, task->tk_status, |
| clp->cl_exchange_flags); |
| nfs4_schedule_session_recovery(clp->cl_session); |
| break; |
| case -NFS4ERR_DELAY: |
| case -NFS4ERR_GRACE: |
| case -EKEYEXPIRED: |
| rpc_delay(task, FILELAYOUT_POLL_RETRY_MAX); |
| break; |
| case -NFS4ERR_RETRY_UNCACHED_REP: |
| break; |
| default: |
| dprintk("%s DS error. Retry through MDS %d\n", __func__, |
| task->tk_status); |
| *reset = 1; |
| break; |
| } |
| out: |
| task->tk_status = 0; |
| return -EAGAIN; |
| wait_on_recovery: |
| rpc_sleep_on(&mds_client->cl_rpcwaitq, task, NULL); |
| if (test_bit(NFS4CLNT_MANAGER_RUNNING, &mds_client->cl_state) == 0) |
| rpc_wake_up_queued_task(&mds_client->cl_rpcwaitq, task); |
| goto out; |
| } |
| |
| /* NFS_PROTO call done callback routines */ |
| |
| static int filelayout_read_done_cb(struct rpc_task *task, |
| struct nfs_read_data *data) |
| { |
| struct nfs_pgio_header *hdr = data->header; |
| int reset = 0; |
| |
| dprintk("%s DS read\n", __func__); |
| |
| if (filelayout_async_handle_error(task, data->args.context->state, |
| data->ds_clp, &reset) == -EAGAIN) { |
| dprintk("%s calling restart ds_clp %p ds_clp->cl_session %p\n", |
| __func__, data->ds_clp, data->ds_clp->cl_session); |
| if (reset) { |
| pnfs_set_lo_fail(hdr->lseg); |
| nfs4_reset_read(task, data); |
| } |
| rpc_restart_call_prepare(task); |
| return -EAGAIN; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * We reference the rpc_cred of the first WRITE that triggers the need for |
| * a LAYOUTCOMMIT, and use it to send the layoutcommit compound. |
| * rfc5661 is not clear about which credential should be used. |
| */ |
| static void |
| filelayout_set_layoutcommit(struct nfs_write_data *wdata) |
| { |
| struct nfs_pgio_header *hdr = wdata->header; |
| |
| if (FILELAYOUT_LSEG(hdr->lseg)->commit_through_mds || |
| wdata->res.verf->committed == NFS_FILE_SYNC) |
| return; |
| |
| pnfs_set_layoutcommit(wdata); |
| dprintk("%s ionde %lu pls_end_pos %lu\n", __func__, hdr->inode->i_ino, |
| (unsigned long) NFS_I(hdr->inode)->layout->plh_lwb); |
| } |
| |
| /* |
| * Call ops for the async read/write cases |
| * In the case of dense layouts, the offset needs to be reset to its |
| * original value. |
| */ |
| static void filelayout_read_prepare(struct rpc_task *task, void *data) |
| { |
| struct nfs_read_data *rdata = data; |
| |
| rdata->read_done_cb = filelayout_read_done_cb; |
| |
| if (nfs41_setup_sequence(rdata->ds_clp->cl_session, |
| &rdata->args.seq_args, &rdata->res.seq_res, |
| task)) |
| return; |
| |
| rpc_call_start(task); |
| } |
| |
| static void filelayout_read_call_done(struct rpc_task *task, void *data) |
| { |
| struct nfs_read_data *rdata = data; |
| |
| dprintk("--> %s task->tk_status %d\n", __func__, task->tk_status); |
| |
| /* Note this may cause RPC to be resent */ |
| rdata->header->mds_ops->rpc_call_done(task, data); |
| } |
| |
| static void filelayout_read_count_stats(struct rpc_task *task, void *data) |
| { |
| struct nfs_read_data *rdata = data; |
| |
| rpc_count_iostats(task, NFS_SERVER(rdata->header->inode)->client->cl_metrics); |
| } |
| |
| static void filelayout_read_release(void *data) |
| { |
| struct nfs_read_data *rdata = data; |
| |
| rdata->header->mds_ops->rpc_release(data); |
| } |
| |
| static int filelayout_write_done_cb(struct rpc_task *task, |
| struct nfs_write_data *data) |
| { |
| struct nfs_pgio_header *hdr = data->header; |
| int reset = 0; |
| |
| if (filelayout_async_handle_error(task, data->args.context->state, |
| data->ds_clp, &reset) == -EAGAIN) { |
| dprintk("%s calling restart ds_clp %p ds_clp->cl_session %p\n", |
| __func__, data->ds_clp, data->ds_clp->cl_session); |
| if (reset) { |
| pnfs_set_lo_fail(hdr->lseg); |
| nfs4_reset_write(task, data); |
| } |
| rpc_restart_call_prepare(task); |
| return -EAGAIN; |
| } |
| |
| filelayout_set_layoutcommit(data); |
| return 0; |
| } |
| |
| /* Fake up some data that will cause nfs_commit_release to retry the writes. */ |
| static void prepare_to_resend_writes(struct nfs_commit_data *data) |
| { |
| struct nfs_page *first = nfs_list_entry(data->pages.next); |
| |
| data->task.tk_status = 0; |
| memcpy(data->verf.verifier, first->wb_verf.verifier, |
| sizeof(first->wb_verf.verifier)); |
| data->verf.verifier[0]++; /* ensure verifier mismatch */ |
| } |
| |
| static int filelayout_commit_done_cb(struct rpc_task *task, |
| struct nfs_commit_data *data) |
| { |
| int reset = 0; |
| |
| if (filelayout_async_handle_error(task, data->context->state, |
| data->ds_clp, &reset) == -EAGAIN) { |
| dprintk("%s calling restart ds_clp %p ds_clp->cl_session %p\n", |
| __func__, data->ds_clp, data->ds_clp->cl_session); |
| if (reset) { |
| prepare_to_resend_writes(data); |
| pnfs_set_lo_fail(data->lseg); |
| } else |
| rpc_restart_call_prepare(task); |
| return -EAGAIN; |
| } |
| |
| return 0; |
| } |
| |
| static void filelayout_write_prepare(struct rpc_task *task, void *data) |
| { |
| struct nfs_write_data *wdata = data; |
| |
| if (nfs41_setup_sequence(wdata->ds_clp->cl_session, |
| &wdata->args.seq_args, &wdata->res.seq_res, |
| task)) |
| return; |
| |
| rpc_call_start(task); |
| } |
| |
| static void filelayout_write_call_done(struct rpc_task *task, void *data) |
| { |
| struct nfs_write_data *wdata = data; |
| |
| /* Note this may cause RPC to be resent */ |
| wdata->header->mds_ops->rpc_call_done(task, data); |
| } |
| |
| static void filelayout_write_count_stats(struct rpc_task *task, void *data) |
| { |
| struct nfs_write_data *wdata = data; |
| |
| rpc_count_iostats(task, NFS_SERVER(wdata->header->inode)->client->cl_metrics); |
| } |
| |
| static void filelayout_write_release(void *data) |
| { |
| struct nfs_write_data *wdata = data; |
| |
| wdata->header->mds_ops->rpc_release(data); |
| } |
| |
| static void filelayout_commit_prepare(struct rpc_task *task, void *data) |
| { |
| struct nfs_commit_data *wdata = data; |
| |
| if (nfs41_setup_sequence(wdata->ds_clp->cl_session, |
| &wdata->args.seq_args, &wdata->res.seq_res, |
| task)) |
| return; |
| |
| rpc_call_start(task); |
| } |
| |
| static void filelayout_write_commit_done(struct rpc_task *task, void *data) |
| { |
| struct nfs_commit_data *wdata = data; |
| |
| /* Note this may cause RPC to be resent */ |
| wdata->mds_ops->rpc_call_done(task, data); |
| } |
| |
| static void filelayout_commit_count_stats(struct rpc_task *task, void *data) |
| { |
| struct nfs_commit_data *cdata = data; |
| |
| rpc_count_iostats(task, NFS_SERVER(cdata->inode)->client->cl_metrics); |
| } |
| |
| static void filelayout_commit_release(void *calldata) |
| { |
| struct nfs_commit_data *data = calldata; |
| |
| data->completion_ops->completion(data); |
| put_lseg(data->lseg); |
| nfs_commitdata_release(data); |
| } |
| |
| static const struct rpc_call_ops filelayout_read_call_ops = { |
| .rpc_call_prepare = filelayout_read_prepare, |
| .rpc_call_done = filelayout_read_call_done, |
| .rpc_count_stats = filelayout_read_count_stats, |
| .rpc_release = filelayout_read_release, |
| }; |
| |
| static const struct rpc_call_ops filelayout_write_call_ops = { |
| .rpc_call_prepare = filelayout_write_prepare, |
| .rpc_call_done = filelayout_write_call_done, |
| .rpc_count_stats = filelayout_write_count_stats, |
| .rpc_release = filelayout_write_release, |
| }; |
| |
| static const struct rpc_call_ops filelayout_commit_call_ops = { |
| .rpc_call_prepare = filelayout_commit_prepare, |
| .rpc_call_done = filelayout_write_commit_done, |
| .rpc_count_stats = filelayout_commit_count_stats, |
| .rpc_release = filelayout_commit_release, |
| }; |
| |
| static enum pnfs_try_status |
| filelayout_read_pagelist(struct nfs_read_data *data) |
| { |
| struct nfs_pgio_header *hdr = data->header; |
| struct pnfs_layout_segment *lseg = hdr->lseg; |
| struct nfs4_pnfs_ds *ds; |
| loff_t offset = data->args.offset; |
| u32 j, idx; |
| struct nfs_fh *fh; |
| int status; |
| |
| dprintk("--> %s ino %lu pgbase %u req %Zu@%llu\n", |
| __func__, hdr->inode->i_ino, |
| data->args.pgbase, (size_t)data->args.count, offset); |
| |
| if (test_bit(NFS_DEVICEID_INVALID, &FILELAYOUT_DEVID_NODE(lseg)->flags)) |
| return PNFS_NOT_ATTEMPTED; |
| |
| /* Retrieve the correct rpc_client for the byte range */ |
| j = nfs4_fl_calc_j_index(lseg, offset); |
| idx = nfs4_fl_calc_ds_index(lseg, j); |
| ds = nfs4_fl_prepare_ds(lseg, idx); |
| if (!ds) { |
| /* Either layout fh index faulty, or ds connect failed */ |
| set_bit(lo_fail_bit(IOMODE_RW), &lseg->pls_layout->plh_flags); |
| set_bit(lo_fail_bit(IOMODE_READ), &lseg->pls_layout->plh_flags); |
| return PNFS_NOT_ATTEMPTED; |
| } |
| dprintk("%s USE DS: %s\n", __func__, ds->ds_remotestr); |
| |
| /* No multipath support. Use first DS */ |
| data->ds_clp = ds->ds_clp; |
| fh = nfs4_fl_select_ds_fh(lseg, j); |
| if (fh) |
| data->args.fh = fh; |
| |
| data->args.offset = filelayout_get_dserver_offset(lseg, offset); |
| data->mds_offset = offset; |
| |
| /* Perform an asynchronous read to ds */ |
| status = nfs_initiate_read(ds->ds_clp->cl_rpcclient, data, |
| &filelayout_read_call_ops); |
| BUG_ON(status != 0); |
| return PNFS_ATTEMPTED; |
| } |
| |
| /* Perform async writes. */ |
| static enum pnfs_try_status |
| filelayout_write_pagelist(struct nfs_write_data *data, int sync) |
| { |
| struct nfs_pgio_header *hdr = data->header; |
| struct pnfs_layout_segment *lseg = hdr->lseg; |
| struct nfs4_pnfs_ds *ds; |
| loff_t offset = data->args.offset; |
| u32 j, idx; |
| struct nfs_fh *fh; |
| int status; |
| |
| if (test_bit(NFS_DEVICEID_INVALID, &FILELAYOUT_DEVID_NODE(lseg)->flags)) |
| return PNFS_NOT_ATTEMPTED; |
| |
| /* Retrieve the correct rpc_client for the byte range */ |
| j = nfs4_fl_calc_j_index(lseg, offset); |
| idx = nfs4_fl_calc_ds_index(lseg, j); |
| ds = nfs4_fl_prepare_ds(lseg, idx); |
| if (!ds) { |
| printk(KERN_ERR "NFS: %s: prepare_ds failed, use MDS\n", |
| __func__); |
| set_bit(lo_fail_bit(IOMODE_RW), &lseg->pls_layout->plh_flags); |
| set_bit(lo_fail_bit(IOMODE_READ), &lseg->pls_layout->plh_flags); |
| return PNFS_NOT_ATTEMPTED; |
| } |
| dprintk("%s ino %lu sync %d req %Zu@%llu DS: %s\n", __func__, |
| hdr->inode->i_ino, sync, (size_t) data->args.count, offset, |
| ds->ds_remotestr); |
| |
| data->write_done_cb = filelayout_write_done_cb; |
| data->ds_clp = ds->ds_clp; |
| fh = nfs4_fl_select_ds_fh(lseg, j); |
| if (fh) |
| data->args.fh = fh; |
| /* |
| * Get the file offset on the dserver. Set the write offset to |
| * this offset and save the original offset. |
| */ |
| data->args.offset = filelayout_get_dserver_offset(lseg, offset); |
| |
| /* Perform an asynchronous write */ |
| status = nfs_initiate_write(ds->ds_clp->cl_rpcclient, data, |
| &filelayout_write_call_ops, sync); |
| BUG_ON(status != 0); |
| return PNFS_ATTEMPTED; |
| } |
| |
| /* |
| * filelayout_check_layout() |
| * |
| * Make sure layout segment parameters are sane WRT the device. |
| * At this point no generic layer initialization of the lseg has occurred, |
| * and nothing has been added to the layout_hdr cache. |
| * |
| */ |
| static int |
| filelayout_check_layout(struct pnfs_layout_hdr *lo, |
| struct nfs4_filelayout_segment *fl, |
| struct nfs4_layoutget_res *lgr, |
| struct nfs4_deviceid *id, |
| gfp_t gfp_flags) |
| { |
| struct nfs4_deviceid_node *d; |
| struct nfs4_file_layout_dsaddr *dsaddr; |
| int status = -EINVAL; |
| struct nfs_server *nfss = NFS_SERVER(lo->plh_inode); |
| |
| dprintk("--> %s\n", __func__); |
| |
| /* FIXME: remove this check when layout segment support is added */ |
| if (lgr->range.offset != 0 || |
| lgr->range.length != NFS4_MAX_UINT64) { |
| dprintk("%s Only whole file layouts supported. Use MDS i/o\n", |
| __func__); |
| goto out; |
| } |
| |
| if (fl->pattern_offset > lgr->range.offset) { |
| dprintk("%s pattern_offset %lld too large\n", |
| __func__, fl->pattern_offset); |
| goto out; |
| } |
| |
| if (!fl->stripe_unit || fl->stripe_unit % PAGE_SIZE) { |
| dprintk("%s Invalid stripe unit (%u)\n", |
| __func__, fl->stripe_unit); |
| goto out; |
| } |
| |
| /* find and reference the deviceid */ |
| d = nfs4_find_get_deviceid(NFS_SERVER(lo->plh_inode)->pnfs_curr_ld, |
| NFS_SERVER(lo->plh_inode)->nfs_client, id); |
| if (d == NULL) { |
| dsaddr = get_device_info(lo->plh_inode, id, gfp_flags); |
| if (dsaddr == NULL) |
| goto out; |
| } else |
| dsaddr = container_of(d, struct nfs4_file_layout_dsaddr, id_node); |
| /* Found deviceid is being reaped */ |
| if (test_bit(NFS_DEVICEID_INVALID, &dsaddr->id_node.flags)) |
| goto out_put; |
| |
| fl->dsaddr = dsaddr; |
| |
| if (fl->first_stripe_index >= dsaddr->stripe_count) { |
| dprintk("%s Bad first_stripe_index %u\n", |
| __func__, fl->first_stripe_index); |
| goto out_put; |
| } |
| |
| if ((fl->stripe_type == STRIPE_SPARSE && |
| fl->num_fh > 1 && fl->num_fh != dsaddr->ds_num) || |
| (fl->stripe_type == STRIPE_DENSE && |
| fl->num_fh != dsaddr->stripe_count)) { |
| dprintk("%s num_fh %u not valid for given packing\n", |
| __func__, fl->num_fh); |
| goto out_put; |
| } |
| |
| if (fl->stripe_unit % nfss->rsize || fl->stripe_unit % nfss->wsize) { |
| dprintk("%s Stripe unit (%u) not aligned with rsize %u " |
| "wsize %u\n", __func__, fl->stripe_unit, nfss->rsize, |
| nfss->wsize); |
| } |
| |
| status = 0; |
| out: |
| dprintk("--> %s returns %d\n", __func__, status); |
| return status; |
| out_put: |
| nfs4_fl_put_deviceid(dsaddr); |
| goto out; |
| } |
| |
| static void filelayout_free_fh_array(struct nfs4_filelayout_segment *fl) |
| { |
| int i; |
| |
| for (i = 0; i < fl->num_fh; i++) { |
| if (!fl->fh_array[i]) |
| break; |
| kfree(fl->fh_array[i]); |
| } |
| kfree(fl->fh_array); |
| fl->fh_array = NULL; |
| } |
| |
| static void |
| _filelayout_free_lseg(struct nfs4_filelayout_segment *fl) |
| { |
| filelayout_free_fh_array(fl); |
| kfree(fl); |
| } |
| |
| static int |
| filelayout_decode_layout(struct pnfs_layout_hdr *flo, |
| struct nfs4_filelayout_segment *fl, |
| struct nfs4_layoutget_res *lgr, |
| struct nfs4_deviceid *id, |
| gfp_t gfp_flags) |
| { |
| struct xdr_stream stream; |
| struct xdr_buf buf; |
| struct page *scratch; |
| __be32 *p; |
| uint32_t nfl_util; |
| int i; |
| |
| dprintk("%s: set_layout_map Begin\n", __func__); |
| |
| scratch = alloc_page(gfp_flags); |
| if (!scratch) |
| return -ENOMEM; |
| |
| xdr_init_decode_pages(&stream, &buf, lgr->layoutp->pages, lgr->layoutp->len); |
| xdr_set_scratch_buffer(&stream, page_address(scratch), PAGE_SIZE); |
| |
| /* 20 = ufl_util (4), first_stripe_index (4), pattern_offset (8), |
| * num_fh (4) */ |
| p = xdr_inline_decode(&stream, NFS4_DEVICEID4_SIZE + 20); |
| if (unlikely(!p)) |
| goto out_err; |
| |
| memcpy(id, p, sizeof(*id)); |
| p += XDR_QUADLEN(NFS4_DEVICEID4_SIZE); |
| nfs4_print_deviceid(id); |
| |
| nfl_util = be32_to_cpup(p++); |
| if (nfl_util & NFL4_UFLG_COMMIT_THRU_MDS) |
| fl->commit_through_mds = 1; |
| if (nfl_util & NFL4_UFLG_DENSE) |
| fl->stripe_type = STRIPE_DENSE; |
| else |
| fl->stripe_type = STRIPE_SPARSE; |
| fl->stripe_unit = nfl_util & ~NFL4_UFLG_MASK; |
| |
| fl->first_stripe_index = be32_to_cpup(p++); |
| p = xdr_decode_hyper(p, &fl->pattern_offset); |
| fl->num_fh = be32_to_cpup(p++); |
| |
| dprintk("%s: nfl_util 0x%X num_fh %u fsi %u po %llu\n", |
| __func__, nfl_util, fl->num_fh, fl->first_stripe_index, |
| fl->pattern_offset); |
| |
| /* Note that a zero value for num_fh is legal for STRIPE_SPARSE. |
| * Futher checking is done in filelayout_check_layout */ |
| if (fl->num_fh > |
| max(NFS4_PNFS_MAX_STRIPE_CNT, NFS4_PNFS_MAX_MULTI_CNT)) |
| goto out_err; |
| |
| if (fl->num_fh > 0) { |
| fl->fh_array = kzalloc(fl->num_fh * sizeof(struct nfs_fh *), |
| gfp_flags); |
| if (!fl->fh_array) |
| goto out_err; |
| } |
| |
| for (i = 0; i < fl->num_fh; i++) { |
| /* Do we want to use a mempool here? */ |
| fl->fh_array[i] = kmalloc(sizeof(struct nfs_fh), gfp_flags); |
| if (!fl->fh_array[i]) |
| goto out_err_free; |
| |
| p = xdr_inline_decode(&stream, 4); |
| if (unlikely(!p)) |
| goto out_err_free; |
| fl->fh_array[i]->size = be32_to_cpup(p++); |
| if (sizeof(struct nfs_fh) < fl->fh_array[i]->size) { |
| printk(KERN_ERR "NFS: Too big fh %d received %d\n", |
| i, fl->fh_array[i]->size); |
| goto out_err_free; |
| } |
| |
| p = xdr_inline_decode(&stream, fl->fh_array[i]->size); |
| if (unlikely(!p)) |
| goto out_err_free; |
| memcpy(fl->fh_array[i]->data, p, fl->fh_array[i]->size); |
| dprintk("DEBUG: %s: fh len %d\n", __func__, |
| fl->fh_array[i]->size); |
| } |
| |
| __free_page(scratch); |
| return 0; |
| |
| out_err_free: |
| filelayout_free_fh_array(fl); |
| out_err: |
| __free_page(scratch); |
| return -EIO; |
| } |
| |
| static void |
| filelayout_free_lseg(struct pnfs_layout_segment *lseg) |
| { |
| struct nfs4_filelayout_segment *fl = FILELAYOUT_LSEG(lseg); |
| |
| dprintk("--> %s\n", __func__); |
| nfs4_fl_put_deviceid(fl->dsaddr); |
| /* This assumes a single RW lseg */ |
| if (lseg->pls_range.iomode == IOMODE_RW) { |
| struct nfs4_filelayout *flo; |
| |
| flo = FILELAYOUT_FROM_HDR(lseg->pls_layout); |
| flo->commit_info.nbuckets = 0; |
| kfree(flo->commit_info.buckets); |
| flo->commit_info.buckets = NULL; |
| } |
| _filelayout_free_lseg(fl); |
| } |
| |
| static int |
| filelayout_alloc_commit_info(struct pnfs_layout_segment *lseg, |
| struct nfs_commit_info *cinfo, |
| gfp_t gfp_flags) |
| { |
| struct nfs4_filelayout_segment *fl = FILELAYOUT_LSEG(lseg); |
| struct pnfs_commit_bucket *buckets; |
| int size; |
| |
| if (fl->commit_through_mds) |
| return 0; |
| if (cinfo->ds->nbuckets != 0) { |
| /* This assumes there is only one IOMODE_RW lseg. What |
| * we really want to do is have a layout_hdr level |
| * dictionary of <multipath_list4, fh> keys, each |
| * associated with a struct list_head, populated by calls |
| * to filelayout_write_pagelist(). |
| * */ |
| return 0; |
| } |
| |
| size = (fl->stripe_type == STRIPE_SPARSE) ? |
| fl->dsaddr->ds_num : fl->dsaddr->stripe_count; |
| |
| buckets = kcalloc(size, sizeof(struct pnfs_commit_bucket), |
| gfp_flags); |
| if (!buckets) |
| return -ENOMEM; |
| else { |
| int i; |
| |
| spin_lock(cinfo->lock); |
| if (cinfo->ds->nbuckets != 0) |
| kfree(buckets); |
| else { |
| cinfo->ds->buckets = buckets; |
| cinfo->ds->nbuckets = size; |
| for (i = 0; i < size; i++) { |
| INIT_LIST_HEAD(&buckets[i].written); |
| INIT_LIST_HEAD(&buckets[i].committing); |
| } |
| } |
| spin_unlock(cinfo->lock); |
| return 0; |
| } |
| } |
| |
| static struct pnfs_layout_segment * |
| filelayout_alloc_lseg(struct pnfs_layout_hdr *layoutid, |
| struct nfs4_layoutget_res *lgr, |
| gfp_t gfp_flags) |
| { |
| struct nfs4_filelayout_segment *fl; |
| int rc; |
| struct nfs4_deviceid id; |
| |
| dprintk("--> %s\n", __func__); |
| fl = kzalloc(sizeof(*fl), gfp_flags); |
| if (!fl) |
| return NULL; |
| |
| rc = filelayout_decode_layout(layoutid, fl, lgr, &id, gfp_flags); |
| if (rc != 0 || filelayout_check_layout(layoutid, fl, lgr, &id, gfp_flags)) { |
| _filelayout_free_lseg(fl); |
| return NULL; |
| } |
| return &fl->generic_hdr; |
| } |
| |
| /* |
| * filelayout_pg_test(). Called by nfs_can_coalesce_requests() |
| * |
| * return true : coalesce page |
| * return false : don't coalesce page |
| */ |
| static bool |
| filelayout_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, |
| struct nfs_page *req) |
| { |
| u64 p_stripe, r_stripe; |
| u32 stripe_unit; |
| |
| if (!pnfs_generic_pg_test(pgio, prev, req) || |
| !nfs_generic_pg_test(pgio, prev, req)) |
| return false; |
| |
| p_stripe = (u64)req_offset(prev); |
| r_stripe = (u64)req_offset(req); |
| stripe_unit = FILELAYOUT_LSEG(pgio->pg_lseg)->stripe_unit; |
| |
| do_div(p_stripe, stripe_unit); |
| do_div(r_stripe, stripe_unit); |
| |
| return (p_stripe == r_stripe); |
| } |
| |
| static void |
| filelayout_pg_init_read(struct nfs_pageio_descriptor *pgio, |
| struct nfs_page *req) |
| { |
| BUG_ON(pgio->pg_lseg != NULL); |
| |
| if (req->wb_offset != req->wb_pgbase) { |
| /* |
| * Handling unaligned pages is difficult, because have to |
| * somehow split a req in two in certain cases in the |
| * pg.test code. Avoid this by just not using pnfs |
| * in this case. |
| */ |
| nfs_pageio_reset_read_mds(pgio); |
| return; |
| } |
| pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode, |
| req->wb_context, |
| 0, |
| NFS4_MAX_UINT64, |
| IOMODE_READ, |
| GFP_KERNEL); |
| /* If no lseg, fall back to read through mds */ |
| if (pgio->pg_lseg == NULL) |
| nfs_pageio_reset_read_mds(pgio); |
| } |
| |
| static void |
| filelayout_pg_init_write(struct nfs_pageio_descriptor *pgio, |
| struct nfs_page *req) |
| { |
| struct nfs_commit_info cinfo; |
| int status; |
| |
| BUG_ON(pgio->pg_lseg != NULL); |
| |
| if (req->wb_offset != req->wb_pgbase) |
| goto out_mds; |
| pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode, |
| req->wb_context, |
| 0, |
| NFS4_MAX_UINT64, |
| IOMODE_RW, |
| GFP_NOFS); |
| /* If no lseg, fall back to write through mds */ |
| if (pgio->pg_lseg == NULL) |
| goto out_mds; |
| nfs_init_cinfo(&cinfo, pgio->pg_inode, pgio->pg_dreq); |
| status = filelayout_alloc_commit_info(pgio->pg_lseg, &cinfo, GFP_NOFS); |
| if (status < 0) { |
| put_lseg(pgio->pg_lseg); |
| pgio->pg_lseg = NULL; |
| goto out_mds; |
| } |
| return; |
| out_mds: |
| nfs_pageio_reset_write_mds(pgio); |
| } |
| |
| static const struct nfs_pageio_ops filelayout_pg_read_ops = { |
| .pg_init = filelayout_pg_init_read, |
| .pg_test = filelayout_pg_test, |
| .pg_doio = pnfs_generic_pg_readpages, |
| }; |
| |
| static const struct nfs_pageio_ops filelayout_pg_write_ops = { |
| .pg_init = filelayout_pg_init_write, |
| .pg_test = filelayout_pg_test, |
| .pg_doio = pnfs_generic_pg_writepages, |
| }; |
| |
| static u32 select_bucket_index(struct nfs4_filelayout_segment *fl, u32 j) |
| { |
| if (fl->stripe_type == STRIPE_SPARSE) |
| return nfs4_fl_calc_ds_index(&fl->generic_hdr, j); |
| else |
| return j; |
| } |
| |
| /* The generic layer is about to remove the req from the commit list. |
| * If this will make the bucket empty, it will need to put the lseg reference. |
| */ |
| static void |
| filelayout_clear_request_commit(struct nfs_page *req, |
| struct nfs_commit_info *cinfo) |
| { |
| struct pnfs_layout_segment *freeme = NULL; |
| |
| spin_lock(cinfo->lock); |
| if (!test_and_clear_bit(PG_COMMIT_TO_DS, &req->wb_flags)) |
| goto out; |
| cinfo->ds->nwritten--; |
| if (list_is_singular(&req->wb_list)) { |
| struct pnfs_commit_bucket *bucket; |
| |
| bucket = list_first_entry(&req->wb_list, |
| struct pnfs_commit_bucket, |
| written); |
| freeme = bucket->wlseg; |
| bucket->wlseg = NULL; |
| } |
| out: |
| nfs_request_remove_commit_list(req, cinfo); |
| spin_unlock(cinfo->lock); |
| put_lseg(freeme); |
| } |
| |
| static struct list_head * |
| filelayout_choose_commit_list(struct nfs_page *req, |
| struct pnfs_layout_segment *lseg, |
| struct nfs_commit_info *cinfo) |
| { |
| struct nfs4_filelayout_segment *fl = FILELAYOUT_LSEG(lseg); |
| u32 i, j; |
| struct list_head *list; |
| struct pnfs_commit_bucket *buckets; |
| |
| if (fl->commit_through_mds) |
| return &cinfo->mds->list; |
| |
| /* Note that we are calling nfs4_fl_calc_j_index on each page |
| * that ends up being committed to a data server. An attractive |
| * alternative is to add a field to nfs_write_data and nfs_page |
| * to store the value calculated in filelayout_write_pagelist |
| * and just use that here. |
| */ |
| j = nfs4_fl_calc_j_index(lseg, req_offset(req)); |
| i = select_bucket_index(fl, j); |
| buckets = cinfo->ds->buckets; |
| list = &buckets[i].written; |
| if (list_empty(list)) { |
| /* Non-empty buckets hold a reference on the lseg. That ref |
| * is normally transferred to the COMMIT call and released |
| * there. It could also be released if the last req is pulled |
| * off due to a rewrite, in which case it will be done in |
| * filelayout_clear_request_commit |
| */ |
| buckets[i].wlseg = get_lseg(lseg); |
| } |
| set_bit(PG_COMMIT_TO_DS, &req->wb_flags); |
| cinfo->ds->nwritten++; |
| return list; |
| } |
| |
| static void |
| filelayout_mark_request_commit(struct nfs_page *req, |
| struct pnfs_layout_segment *lseg, |
| struct nfs_commit_info *cinfo) |
| { |
| struct list_head *list; |
| |
| list = filelayout_choose_commit_list(req, lseg, cinfo); |
| nfs_request_add_commit_list(req, list, cinfo); |
| } |
| |
| static u32 calc_ds_index_from_commit(struct pnfs_layout_segment *lseg, u32 i) |
| { |
| struct nfs4_filelayout_segment *flseg = FILELAYOUT_LSEG(lseg); |
| |
| if (flseg->stripe_type == STRIPE_SPARSE) |
| return i; |
| else |
| return nfs4_fl_calc_ds_index(lseg, i); |
| } |
| |
| static struct nfs_fh * |
| select_ds_fh_from_commit(struct pnfs_layout_segment *lseg, u32 i) |
| { |
| struct nfs4_filelayout_segment *flseg = FILELAYOUT_LSEG(lseg); |
| |
| if (flseg->stripe_type == STRIPE_SPARSE) { |
| if (flseg->num_fh == 1) |
| i = 0; |
| else if (flseg->num_fh == 0) |
| /* Use the MDS OPEN fh set in nfs_read_rpcsetup */ |
| return NULL; |
| } |
| return flseg->fh_array[i]; |
| } |
| |
| static int filelayout_initiate_commit(struct nfs_commit_data *data, int how) |
| { |
| struct pnfs_layout_segment *lseg = data->lseg; |
| struct nfs4_pnfs_ds *ds; |
| u32 idx; |
| struct nfs_fh *fh; |
| |
| idx = calc_ds_index_from_commit(lseg, data->ds_commit_index); |
| ds = nfs4_fl_prepare_ds(lseg, idx); |
| if (!ds) { |
| printk(KERN_ERR "NFS: %s: prepare_ds failed, use MDS\n", |
| __func__); |
| set_bit(lo_fail_bit(IOMODE_RW), &lseg->pls_layout->plh_flags); |
| set_bit(lo_fail_bit(IOMODE_READ), &lseg->pls_layout->plh_flags); |
| prepare_to_resend_writes(data); |
| filelayout_commit_release(data); |
| return -EAGAIN; |
| } |
| dprintk("%s ino %lu, how %d\n", __func__, data->inode->i_ino, how); |
| data->commit_done_cb = filelayout_commit_done_cb; |
| data->ds_clp = ds->ds_clp; |
| fh = select_ds_fh_from_commit(lseg, data->ds_commit_index); |
| if (fh) |
| data->args.fh = fh; |
| return nfs_initiate_commit(ds->ds_clp->cl_rpcclient, data, |
| &filelayout_commit_call_ops, how); |
| } |
| |
| static int |
| transfer_commit_list(struct list_head *src, struct list_head *dst, |
| struct nfs_commit_info *cinfo, int max) |
| { |
| struct nfs_page *req, *tmp; |
| int ret = 0; |
| |
| list_for_each_entry_safe(req, tmp, src, wb_list) { |
| if (!nfs_lock_request(req)) |
| continue; |
| if (cond_resched_lock(cinfo->lock)) |
| list_safe_reset_next(req, tmp, wb_list); |
| nfs_request_remove_commit_list(req, cinfo); |
| clear_bit(PG_COMMIT_TO_DS, &req->wb_flags); |
| nfs_list_add_request(req, dst); |
| ret++; |
| if ((ret == max) && !cinfo->dreq) |
| break; |
| } |
| return ret; |
| } |
| |
| static int |
| filelayout_scan_ds_commit_list(struct pnfs_commit_bucket *bucket, |
| struct nfs_commit_info *cinfo, |
| int max) |
| { |
| struct list_head *src = &bucket->written; |
| struct list_head *dst = &bucket->committing; |
| int ret; |
| |
| ret = transfer_commit_list(src, dst, cinfo, max); |
| if (ret) { |
| cinfo->ds->nwritten -= ret; |
| cinfo->ds->ncommitting += ret; |
| bucket->clseg = bucket->wlseg; |
| if (list_empty(src)) |
| bucket->wlseg = NULL; |
| else |
| get_lseg(bucket->clseg); |
| } |
| return ret; |
| } |
| |
| /* Move reqs from written to committing lists, returning count of number moved. |
| * Note called with cinfo->lock held. |
| */ |
| static int filelayout_scan_commit_lists(struct nfs_commit_info *cinfo, |
| int max) |
| { |
| int i, rv = 0, cnt; |
| |
| for (i = 0; i < cinfo->ds->nbuckets && max != 0; i++) { |
| cnt = filelayout_scan_ds_commit_list(&cinfo->ds->buckets[i], |
| cinfo, max); |
| max -= cnt; |
| rv += cnt; |
| } |
| return rv; |
| } |
| |
| /* Pull everything off the committing lists and dump into @dst */ |
| static void filelayout_recover_commit_reqs(struct list_head *dst, |
| struct nfs_commit_info *cinfo) |
| { |
| struct pnfs_commit_bucket *b; |
| int i; |
| |
| /* NOTE cinfo->lock is NOT held, relying on fact that this is |
| * only called on single thread per dreq. |
| * Can't take the lock because need to do put_lseg |
| */ |
| for (i = 0, b = cinfo->ds->buckets; i < cinfo->ds->nbuckets; i++, b++) { |
| if (transfer_commit_list(&b->written, dst, cinfo, 0)) { |
| BUG_ON(!list_empty(&b->written)); |
| put_lseg(b->wlseg); |
| b->wlseg = NULL; |
| } |
| } |
| cinfo->ds->nwritten = 0; |
| } |
| |
| static unsigned int |
| alloc_ds_commits(struct nfs_commit_info *cinfo, struct list_head *list) |
| { |
| struct pnfs_ds_commit_info *fl_cinfo; |
| struct pnfs_commit_bucket *bucket; |
| struct nfs_commit_data *data; |
| int i, j; |
| unsigned int nreq = 0; |
| |
| fl_cinfo = cinfo->ds; |
| bucket = fl_cinfo->buckets; |
| for (i = 0; i < fl_cinfo->nbuckets; i++, bucket++) { |
| if (list_empty(&bucket->committing)) |
| continue; |
| data = nfs_commitdata_alloc(); |
| if (!data) |
| break; |
| data->ds_commit_index = i; |
| data->lseg = bucket->clseg; |
| bucket->clseg = NULL; |
| list_add(&data->pages, list); |
| nreq++; |
| } |
| |
| /* Clean up on error */ |
| for (j = i; j < fl_cinfo->nbuckets; j++, bucket++) { |
| if (list_empty(&bucket->committing)) |
| continue; |
| nfs_retry_commit(&bucket->committing, bucket->clseg, cinfo); |
| put_lseg(bucket->clseg); |
| bucket->clseg = NULL; |
| } |
| /* Caller will clean up entries put on list */ |
| return nreq; |
| } |
| |
| /* This follows nfs_commit_list pretty closely */ |
| static int |
| filelayout_commit_pagelist(struct inode *inode, struct list_head *mds_pages, |
| int how, struct nfs_commit_info *cinfo) |
| { |
| struct nfs_commit_data *data, *tmp; |
| LIST_HEAD(list); |
| unsigned int nreq = 0; |
| |
| if (!list_empty(mds_pages)) { |
| data = nfs_commitdata_alloc(); |
| if (data != NULL) { |
| data->lseg = NULL; |
| list_add(&data->pages, &list); |
| nreq++; |
| } else |
| nfs_retry_commit(mds_pages, NULL, cinfo); |
| } |
| |
| nreq += alloc_ds_commits(cinfo, &list); |
| |
| if (nreq == 0) { |
| cinfo->completion_ops->error_cleanup(NFS_I(inode)); |
| goto out; |
| } |
| |
| atomic_add(nreq, &cinfo->mds->rpcs_out); |
| |
| list_for_each_entry_safe(data, tmp, &list, pages) { |
| list_del_init(&data->pages); |
| if (!data->lseg) { |
| nfs_init_commit(data, mds_pages, NULL, cinfo); |
| nfs_initiate_commit(NFS_CLIENT(inode), data, |
| data->mds_ops, how); |
| } else { |
| struct pnfs_commit_bucket *buckets; |
| |
| buckets = cinfo->ds->buckets; |
| nfs_init_commit(data, &buckets[data->ds_commit_index].committing, data->lseg, cinfo); |
| filelayout_initiate_commit(data, how); |
| } |
| } |
| out: |
| cinfo->ds->ncommitting = 0; |
| return PNFS_ATTEMPTED; |
| } |
| |
| static void |
| filelayout_free_deveiceid_node(struct nfs4_deviceid_node *d) |
| { |
| nfs4_fl_free_deviceid(container_of(d, struct nfs4_file_layout_dsaddr, id_node)); |
| } |
| |
| static struct pnfs_layout_hdr * |
| filelayout_alloc_layout_hdr(struct inode *inode, gfp_t gfp_flags) |
| { |
| struct nfs4_filelayout *flo; |
| |
| flo = kzalloc(sizeof(*flo), gfp_flags); |
| return &flo->generic_hdr; |
| } |
| |
| static void |
| filelayout_free_layout_hdr(struct pnfs_layout_hdr *lo) |
| { |
| kfree(FILELAYOUT_FROM_HDR(lo)); |
| } |
| |
| static struct pnfs_ds_commit_info * |
| filelayout_get_ds_info(struct inode *inode) |
| { |
| struct pnfs_layout_hdr *layout = NFS_I(inode)->layout; |
| |
| if (layout == NULL) |
| return NULL; |
| else |
| return &FILELAYOUT_FROM_HDR(layout)->commit_info; |
| } |
| |
| static struct pnfs_layoutdriver_type filelayout_type = { |
| .id = LAYOUT_NFSV4_1_FILES, |
| .name = "LAYOUT_NFSV4_1_FILES", |
| .owner = THIS_MODULE, |
| .alloc_layout_hdr = filelayout_alloc_layout_hdr, |
| .free_layout_hdr = filelayout_free_layout_hdr, |
| .alloc_lseg = filelayout_alloc_lseg, |
| .free_lseg = filelayout_free_lseg, |
| .pg_read_ops = &filelayout_pg_read_ops, |
| .pg_write_ops = &filelayout_pg_write_ops, |
| .get_ds_info = &filelayout_get_ds_info, |
| .mark_request_commit = filelayout_mark_request_commit, |
| .clear_request_commit = filelayout_clear_request_commit, |
| .scan_commit_lists = filelayout_scan_commit_lists, |
| .recover_commit_reqs = filelayout_recover_commit_reqs, |
| .commit_pagelist = filelayout_commit_pagelist, |
| .read_pagelist = filelayout_read_pagelist, |
| .write_pagelist = filelayout_write_pagelist, |
| .free_deviceid_node = filelayout_free_deveiceid_node, |
| }; |
| |
| static int __init nfs4filelayout_init(void) |
| { |
| printk(KERN_INFO "%s: NFSv4 File Layout Driver Registering...\n", |
| __func__); |
| return pnfs_register_layoutdriver(&filelayout_type); |
| } |
| |
| static void __exit nfs4filelayout_exit(void) |
| { |
| printk(KERN_INFO "%s: NFSv4 File Layout Driver Unregistering...\n", |
| __func__); |
| pnfs_unregister_layoutdriver(&filelayout_type); |
| } |
| |
| MODULE_ALIAS("nfs-layouttype4-1"); |
| |
| module_init(nfs4filelayout_init); |
| module_exit(nfs4filelayout_exit); |