| /* |
| * Copyright (C) 2004-2005 Advanced Micro Devices, Inc. |
| * Copyright (C) 2007 Bartlomiej Zolnierkiewicz |
| * |
| * History: |
| * 09/20/2005 - Jaya Kumar <jayakumar.ide@gmail.com> |
| * - Reworked tuneproc, set_drive, misc mods to prep for mainline |
| * - Work was sponsored by CIS (M) Sdn Bhd. |
| * Ported to Kernel 2.6.11 on June 26, 2005 by |
| * Wolfgang Zuleger <wolfgang.zuleger@gmx.de> |
| * Alexander Kiausch <alex.kiausch@t-online.de> |
| * Originally developed by AMD for 2.4/2.6 |
| * |
| * Development of this chipset driver was funded |
| * by the nice folks at National Semiconductor/AMD. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * Documentation: |
| * CS5535 documentation available from AMD |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/ide.h> |
| |
| #define DRV_NAME "cs5535" |
| |
| #define MSR_ATAC_BASE 0x51300000 |
| #define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0) |
| #define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01) |
| #define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02) |
| #define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03) |
| #define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04) |
| #define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05) |
| #define ATAC_IO_BAR (MSR_ATAC_BASE+0x08) |
| #define ATAC_RESET (MSR_ATAC_BASE+0x10) |
| #define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20) |
| #define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21) |
| #define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22) |
| #define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23) |
| #define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24) |
| #define ATAC_BM0_CMD_PRIM 0x00 |
| #define ATAC_BM0_STS_PRIM 0x02 |
| #define ATAC_BM0_PRD 0x04 |
| #define CS5535_CABLE_DETECT 0x48 |
| |
| /* Format I PIO settings. We separate out cmd and data for safer timings */ |
| |
| static unsigned int cs5535_pio_cmd_timings[5] = |
| { 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 }; |
| static unsigned int cs5535_pio_dta_timings[5] = |
| { 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 }; |
| |
| static unsigned int cs5535_mwdma_timings[3] = |
| { 0x7F0FFFF3, 0x7F035352, 0x7f024241 }; |
| |
| static unsigned int cs5535_udma_timings[5] = |
| { 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 }; |
| |
| /* Macros to check if the register is the reset value - reset value is an |
| invalid timing and indicates the register has not been set previously */ |
| |
| #define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL) == 0x00009172 ) |
| #define CS5535_BAD_DMA(timings) ( (timings & 0x000FFFFF) == 0x00077771 ) |
| |
| /**** |
| * cs5535_set_speed - Configure the chipset to the new speed |
| * @drive: Drive to set up |
| * @speed: desired speed |
| * |
| * cs5535_set_speed() configures the chipset to a new speed. |
| */ |
| static void cs5535_set_speed(ide_drive_t *drive, const u8 speed) |
| { |
| u32 reg = 0, dummy; |
| u8 unit = drive->dn & 1; |
| |
| /* Set the PIO timings */ |
| if (speed < XFER_SW_DMA_0) { |
| ide_drive_t *pair = ide_get_pair_dev(drive); |
| u8 cmd, pioa; |
| |
| cmd = pioa = speed - XFER_PIO_0; |
| |
| if (pair) { |
| u8 piob = ide_get_best_pio_mode(pair, 255, 4); |
| |
| if (piob < cmd) |
| cmd = piob; |
| } |
| |
| /* Write the speed of the current drive */ |
| reg = (cs5535_pio_cmd_timings[cmd] << 16) | |
| cs5535_pio_dta_timings[pioa]; |
| wrmsr(unit ? ATAC_CH0D1_PIO : ATAC_CH0D0_PIO, reg, 0); |
| |
| /* And if nessesary - change the speed of the other drive */ |
| rdmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, dummy); |
| |
| if (((reg >> 16) & cs5535_pio_cmd_timings[cmd]) != |
| cs5535_pio_cmd_timings[cmd]) { |
| reg &= 0x0000FFFF; |
| reg |= cs5535_pio_cmd_timings[cmd] << 16; |
| wrmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, 0); |
| } |
| |
| /* Set bit 31 of the DMA register for PIO format 1 timings */ |
| rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy); |
| wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, |
| reg | 0x80000000UL, 0); |
| } else { |
| rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy); |
| |
| reg &= 0x80000000UL; /* Preserve the PIO format bit */ |
| |
| if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_4) |
| reg |= cs5535_udma_timings[speed - XFER_UDMA_0]; |
| else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) |
| reg |= cs5535_mwdma_timings[speed - XFER_MW_DMA_0]; |
| else |
| return; |
| |
| wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, 0); |
| } |
| } |
| |
| /** |
| * cs5535_set_dma_mode - set host controller for DMA mode |
| * @drive: drive |
| * @speed: DMA mode |
| * |
| * Programs the chipset for DMA mode. |
| */ |
| |
| static void cs5535_set_dma_mode(ide_drive_t *drive, const u8 speed) |
| { |
| cs5535_set_speed(drive, speed); |
| } |
| |
| /** |
| * cs5535_set_pio_mode - set host controller for PIO mode |
| * @hwif: port |
| * @drive: drive |
| * |
| * A callback from the upper layers for PIO-only tuning. |
| */ |
| |
| static void cs5535_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
| { |
| cs5535_set_speed(drive, drive->pio_mode); |
| } |
| |
| static u8 cs5535_cable_detect(ide_hwif_t *hwif) |
| { |
| struct pci_dev *dev = to_pci_dev(hwif->dev); |
| u8 bit; |
| |
| /* if a 80 wire cable was detected */ |
| pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit); |
| |
| return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; |
| } |
| |
| static const struct ide_port_ops cs5535_port_ops = { |
| .set_pio_mode = cs5535_set_pio_mode, |
| .set_dma_mode = cs5535_set_dma_mode, |
| .cable_detect = cs5535_cable_detect, |
| }; |
| |
| static const struct ide_port_info cs5535_chipset __devinitdata = { |
| .name = DRV_NAME, |
| .port_ops = &cs5535_port_ops, |
| .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE, |
| .pio_mask = ATA_PIO4, |
| .mwdma_mask = ATA_MWDMA2, |
| .udma_mask = ATA_UDMA4, |
| }; |
| |
| static int __devinit cs5535_init_one(struct pci_dev *dev, |
| const struct pci_device_id *id) |
| { |
| return ide_pci_init_one(dev, &cs5535_chipset, NULL); |
| } |
| |
| static const struct pci_device_id cs5535_pci_tbl[] = { |
| { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), 0 }, |
| { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), }, |
| { 0, }, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl); |
| |
| static struct pci_driver cs5535_pci_driver = { |
| .name = "CS5535_IDE", |
| .id_table = cs5535_pci_tbl, |
| .probe = cs5535_init_one, |
| .remove = ide_pci_remove, |
| .suspend = ide_pci_suspend, |
| .resume = ide_pci_resume, |
| }; |
| |
| static int __init cs5535_ide_init(void) |
| { |
| return ide_pci_register_driver(&cs5535_pci_driver); |
| } |
| |
| static void __exit cs5535_ide_exit(void) |
| { |
| pci_unregister_driver(&cs5535_pci_driver); |
| } |
| |
| module_init(cs5535_ide_init); |
| module_exit(cs5535_ide_exit); |
| |
| MODULE_AUTHOR("AMD"); |
| MODULE_DESCRIPTION("PCI driver module for AMD/NS CS5535 IDE"); |
| MODULE_LICENSE("GPL"); |