| /* |
| * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> |
| * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org> |
| * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/gcd.h> |
| #include <linux/io.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| |
| #include <asm/addrspace.h> |
| #include <asm/mach-ar7/ar7.h> |
| |
| #define BOOT_PLL_SOURCE_MASK 0x3 |
| #define CPU_PLL_SOURCE_SHIFT 16 |
| #define BUS_PLL_SOURCE_SHIFT 14 |
| #define USB_PLL_SOURCE_SHIFT 18 |
| #define DSP_PLL_SOURCE_SHIFT 22 |
| #define BOOT_PLL_SOURCE_AFE 0 |
| #define BOOT_PLL_SOURCE_BUS 0 |
| #define BOOT_PLL_SOURCE_REF 1 |
| #define BOOT_PLL_SOURCE_XTAL 2 |
| #define BOOT_PLL_SOURCE_CPU 3 |
| #define BOOT_PLL_BYPASS 0x00000020 |
| #define BOOT_PLL_ASYNC_MODE 0x02000000 |
| #define BOOT_PLL_2TO1_MODE 0x00008000 |
| |
| #define TNETD7200_CLOCK_ID_CPU 0 |
| #define TNETD7200_CLOCK_ID_DSP 1 |
| #define TNETD7200_CLOCK_ID_USB 2 |
| |
| #define TNETD7200_DEF_CPU_CLK 211000000 |
| #define TNETD7200_DEF_DSP_CLK 125000000 |
| #define TNETD7200_DEF_USB_CLK 48000000 |
| |
| struct tnetd7300_clock { |
| u32 ctrl; |
| #define PREDIV_MASK 0x001f0000 |
| #define PREDIV_SHIFT 16 |
| #define POSTDIV_MASK 0x0000001f |
| u32 unused1[3]; |
| u32 pll; |
| #define MUL_MASK 0x0000f000 |
| #define MUL_SHIFT 12 |
| #define PLL_MODE_MASK 0x00000001 |
| #define PLL_NDIV 0x00000800 |
| #define PLL_DIV 0x00000002 |
| #define PLL_STATUS 0x00000001 |
| u32 unused2[3]; |
| }; |
| |
| struct tnetd7300_clocks { |
| struct tnetd7300_clock bus; |
| struct tnetd7300_clock cpu; |
| struct tnetd7300_clock usb; |
| struct tnetd7300_clock dsp; |
| }; |
| |
| struct tnetd7200_clock { |
| u32 ctrl; |
| u32 unused1[3]; |
| #define DIVISOR_ENABLE_MASK 0x00008000 |
| u32 mul; |
| u32 prediv; |
| u32 postdiv; |
| u32 postdiv2; |
| u32 unused2[6]; |
| u32 cmd; |
| u32 status; |
| u32 cmden; |
| u32 padding[15]; |
| }; |
| |
| struct tnetd7200_clocks { |
| struct tnetd7200_clock cpu; |
| struct tnetd7200_clock dsp; |
| struct tnetd7200_clock usb; |
| }; |
| |
| static struct clk bus_clk = { |
| .rate = 125000000, |
| }; |
| |
| static struct clk cpu_clk = { |
| .rate = 150000000, |
| }; |
| |
| static struct clk dsp_clk; |
| static struct clk vbus_clk; |
| |
| static void approximate(int base, int target, int *prediv, |
| int *postdiv, int *mul) |
| { |
| int i, j, k, freq, res = target; |
| for (i = 1; i <= 16; i++) |
| for (j = 1; j <= 32; j++) |
| for (k = 1; k <= 32; k++) { |
| freq = abs(base / j * i / k - target); |
| if (freq < res) { |
| res = freq; |
| *mul = i; |
| *prediv = j; |
| *postdiv = k; |
| } |
| } |
| } |
| |
| static void calculate(int base, int target, int *prediv, int *postdiv, |
| int *mul) |
| { |
| int tmp_gcd, tmp_base, tmp_freq; |
| |
| for (*prediv = 1; *prediv <= 32; (*prediv)++) { |
| tmp_base = base / *prediv; |
| tmp_gcd = gcd(target, tmp_base); |
| *mul = target / tmp_gcd; |
| *postdiv = tmp_base / tmp_gcd; |
| if ((*mul < 1) || (*mul >= 16)) |
| continue; |
| if ((*postdiv > 0) & (*postdiv <= 32)) |
| break; |
| } |
| |
| if (base / *prediv * *mul / *postdiv != target) { |
| approximate(base, target, prediv, postdiv, mul); |
| tmp_freq = base / *prediv * *mul / *postdiv; |
| printk(KERN_WARNING |
| "Adjusted requested frequency %d to %d\n", |
| target, tmp_freq); |
| } |
| |
| printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n", |
| *prediv, *postdiv, *mul); |
| } |
| |
| static int tnetd7300_dsp_clock(void) |
| { |
| u32 didr1, didr2; |
| u8 rev = ar7_chip_rev(); |
| didr1 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x18)); |
| didr2 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x1c)); |
| if (didr2 & (1 << 23)) |
| return 0; |
| if ((rev >= 0x23) && (rev != 0x57)) |
| return 250000000; |
| if ((((didr2 & 0x1fff) << 10) | ((didr1 & 0xffc00000) >> 22)) |
| > 4208000) |
| return 250000000; |
| return 0; |
| } |
| |
| static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock, |
| u32 *bootcr, u32 bus_clock) |
| { |
| int product; |
| int base_clock = AR7_REF_CLOCK; |
| u32 ctrl = readl(&clock->ctrl); |
| u32 pll = readl(&clock->pll); |
| int prediv = ((ctrl & PREDIV_MASK) >> PREDIV_SHIFT) + 1; |
| int postdiv = (ctrl & POSTDIV_MASK) + 1; |
| int divisor = prediv * postdiv; |
| int mul = ((pll & MUL_MASK) >> MUL_SHIFT) + 1; |
| |
| switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) { |
| case BOOT_PLL_SOURCE_BUS: |
| base_clock = bus_clock; |
| break; |
| case BOOT_PLL_SOURCE_REF: |
| base_clock = AR7_REF_CLOCK; |
| break; |
| case BOOT_PLL_SOURCE_XTAL: |
| base_clock = AR7_XTAL_CLOCK; |
| break; |
| case BOOT_PLL_SOURCE_CPU: |
| base_clock = cpu_clk.rate; |
| break; |
| } |
| |
| if (*bootcr & BOOT_PLL_BYPASS) |
| return base_clock / divisor; |
| |
| if ((pll & PLL_MODE_MASK) == 0) |
| return (base_clock >> (mul / 16 + 1)) / divisor; |
| |
| if ((pll & (PLL_NDIV | PLL_DIV)) == (PLL_NDIV | PLL_DIV)) { |
| product = (mul & 1) ? |
| (base_clock * mul) >> 1 : |
| (base_clock * (mul - 1)) >> 2; |
| return product / divisor; |
| } |
| |
| if (mul == 16) |
| return base_clock / divisor; |
| |
| return base_clock * mul / divisor; |
| } |
| |
| static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock, |
| u32 *bootcr, u32 frequency) |
| { |
| int prediv, postdiv, mul; |
| int base_clock = bus_clk.rate; |
| |
| switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) { |
| case BOOT_PLL_SOURCE_BUS: |
| base_clock = bus_clk.rate; |
| break; |
| case BOOT_PLL_SOURCE_REF: |
| base_clock = AR7_REF_CLOCK; |
| break; |
| case BOOT_PLL_SOURCE_XTAL: |
| base_clock = AR7_XTAL_CLOCK; |
| break; |
| case BOOT_PLL_SOURCE_CPU: |
| base_clock = cpu_clk.rate; |
| break; |
| } |
| |
| calculate(base_clock, frequency, &prediv, &postdiv, &mul); |
| |
| writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl); |
| mdelay(1); |
| writel(4, &clock->pll); |
| while (readl(&clock->pll) & PLL_STATUS) |
| ; |
| writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll); |
| mdelay(75); |
| } |
| |
| static void __init tnetd7300_init_clocks(void) |
| { |
| u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); |
| struct tnetd7300_clocks *clocks = |
| ioremap_nocache(UR8_REGS_CLOCKS, |
| sizeof(struct tnetd7300_clocks)); |
| |
| bus_clk.rate = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT, |
| &clocks->bus, bootcr, AR7_AFE_CLOCK); |
| |
| if (*bootcr & BOOT_PLL_ASYNC_MODE) |
| cpu_clk.rate = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT, |
| &clocks->cpu, bootcr, AR7_AFE_CLOCK); |
| else |
| cpu_clk.rate = bus_clk.rate; |
| |
| if (dsp_clk.rate == 250000000) |
| tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp, |
| bootcr, dsp_clk.rate); |
| |
| iounmap(clocks); |
| iounmap(bootcr); |
| } |
| |
| static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock, |
| int prediv, int postdiv, int postdiv2, int mul, u32 frequency) |
| { |
| printk(KERN_INFO |
| "Clocks: base = %d, frequency = %u, prediv = %d, " |
| "postdiv = %d, postdiv2 = %d, mul = %d\n", |
| base, frequency, prediv, postdiv, postdiv2, mul); |
| |
| writel(0, &clock->ctrl); |
| writel(DIVISOR_ENABLE_MASK | ((prediv - 1) & 0x1F), &clock->prediv); |
| writel((mul - 1) & 0xF, &clock->mul); |
| |
| while (readl(&clock->status) & 0x1) |
| ; /* nop */ |
| |
| writel(DIVISOR_ENABLE_MASK | ((postdiv - 1) & 0x1F), &clock->postdiv); |
| |
| writel(readl(&clock->cmden) | 1, &clock->cmden); |
| writel(readl(&clock->cmd) | 1, &clock->cmd); |
| |
| while (readl(&clock->status) & 0x1) |
| ; /* nop */ |
| |
| writel(DIVISOR_ENABLE_MASK | ((postdiv2 - 1) & 0x1F), &clock->postdiv2); |
| |
| writel(readl(&clock->cmden) | 1, &clock->cmden); |
| writel(readl(&clock->cmd) | 1, &clock->cmd); |
| |
| while (readl(&clock->status) & 0x1) |
| ; /* nop */ |
| |
| writel(readl(&clock->ctrl) | 1, &clock->ctrl); |
| } |
| |
| static int tnetd7200_get_clock_base(int clock_id, u32 *bootcr) |
| { |
| if (*bootcr & BOOT_PLL_ASYNC_MODE) |
| /* Async */ |
| switch (clock_id) { |
| case TNETD7200_CLOCK_ID_DSP: |
| return AR7_REF_CLOCK; |
| default: |
| return AR7_AFE_CLOCK; |
| } |
| else |
| /* Sync */ |
| if (*bootcr & BOOT_PLL_2TO1_MODE) |
| /* 2:1 */ |
| switch (clock_id) { |
| case TNETD7200_CLOCK_ID_DSP: |
| return AR7_REF_CLOCK; |
| default: |
| return AR7_AFE_CLOCK; |
| } |
| else |
| /* 1:1 */ |
| return AR7_REF_CLOCK; |
| } |
| |
| |
| static void __init tnetd7200_init_clocks(void) |
| { |
| u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); |
| struct tnetd7200_clocks *clocks = |
| ioremap_nocache(AR7_REGS_CLOCKS, |
| sizeof(struct tnetd7200_clocks)); |
| int cpu_base, cpu_mul, cpu_prediv, cpu_postdiv; |
| int dsp_base, dsp_mul, dsp_prediv, dsp_postdiv; |
| int usb_base, usb_mul, usb_prediv, usb_postdiv; |
| |
| cpu_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_CPU, bootcr); |
| dsp_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_DSP, bootcr); |
| |
| if (*bootcr & BOOT_PLL_ASYNC_MODE) { |
| printk(KERN_INFO "Clocks: Async mode\n"); |
| |
| printk(KERN_INFO "Clocks: Setting DSP clock\n"); |
| calculate(dsp_base, TNETD7200_DEF_DSP_CLK, |
| &dsp_prediv, &dsp_postdiv, &dsp_mul); |
| bus_clk.rate = |
| ((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv; |
| tnetd7200_set_clock(dsp_base, &clocks->dsp, |
| dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2, |
| bus_clk.rate); |
| |
| printk(KERN_INFO "Clocks: Setting CPU clock\n"); |
| calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, |
| &cpu_postdiv, &cpu_mul); |
| cpu_clk.rate = |
| ((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv; |
| tnetd7200_set_clock(cpu_base, &clocks->cpu, |
| cpu_prediv, cpu_postdiv, -1, cpu_mul, |
| cpu_clk.rate); |
| |
| } else |
| if (*bootcr & BOOT_PLL_2TO1_MODE) { |
| printk(KERN_INFO "Clocks: Sync 2:1 mode\n"); |
| |
| printk(KERN_INFO "Clocks: Setting CPU clock\n"); |
| calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, |
| &cpu_postdiv, &cpu_mul); |
| cpu_clk.rate = ((cpu_base / cpu_prediv) * cpu_mul) |
| / cpu_postdiv; |
| tnetd7200_set_clock(cpu_base, &clocks->cpu, |
| cpu_prediv, cpu_postdiv, -1, cpu_mul, |
| cpu_clk.rate); |
| |
| printk(KERN_INFO "Clocks: Setting DSP clock\n"); |
| calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, |
| &dsp_postdiv, &dsp_mul); |
| bus_clk.rate = cpu_clk.rate / 2; |
| tnetd7200_set_clock(dsp_base, &clocks->dsp, |
| dsp_prediv, dsp_postdiv * 2, dsp_postdiv, |
| dsp_mul * 2, bus_clk.rate); |
| } else { |
| printk(KERN_INFO "Clocks: Sync 1:1 mode\n"); |
| |
| printk(KERN_INFO "Clocks: Setting DSP clock\n"); |
| calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, |
| &dsp_postdiv, &dsp_mul); |
| bus_clk.rate = ((dsp_base / dsp_prediv) * dsp_mul) |
| / dsp_postdiv; |
| tnetd7200_set_clock(dsp_base, &clocks->dsp, |
| dsp_prediv, dsp_postdiv * 2, dsp_postdiv, |
| dsp_mul * 2, bus_clk.rate); |
| |
| cpu_clk.rate = bus_clk.rate; |
| } |
| |
| printk(KERN_INFO "Clocks: Setting USB clock\n"); |
| usb_base = bus_clk.rate; |
| calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv, |
| &usb_postdiv, &usb_mul); |
| tnetd7200_set_clock(usb_base, &clocks->usb, |
| usb_prediv, usb_postdiv, -1, usb_mul, |
| TNETD7200_DEF_USB_CLK); |
| |
| dsp_clk.rate = cpu_clk.rate; |
| |
| iounmap(clocks); |
| iounmap(bootcr); |
| } |
| |
| /* |
| * Linux clock API |
| */ |
| int clk_enable(struct clk *clk) |
| { |
| return 0; |
| } |
| EXPORT_SYMBOL(clk_enable); |
| |
| void clk_disable(struct clk *clk) |
| { |
| } |
| EXPORT_SYMBOL(clk_disable); |
| |
| unsigned long clk_get_rate(struct clk *clk) |
| { |
| return clk->rate; |
| } |
| EXPORT_SYMBOL(clk_get_rate); |
| |
| struct clk *clk_get(struct device *dev, const char *id) |
| { |
| if (!strcmp(id, "bus")) |
| return &bus_clk; |
| /* cpmac and vbus share the same rate */ |
| if (!strcmp(id, "cpmac")) |
| return &vbus_clk; |
| if (!strcmp(id, "cpu")) |
| return &cpu_clk; |
| if (!strcmp(id, "dsp")); |
| return &dsp_clk; |
| if (!strcmp(id, "vbus")) |
| return &vbus_clk; |
| return ERR_PTR(-ENOENT); |
| } |
| EXPORT_SYMBOL(clk_get); |
| |
| void clk_put(struct clk *clk) |
| { |
| } |
| EXPORT_SYMBOL(clk_put); |
| |
| void __init ar7_init_clocks(void) |
| { |
| switch (ar7_chip_id()) { |
| case AR7_CHIP_7100: |
| case AR7_CHIP_7200: |
| tnetd7200_init_clocks(); |
| break; |
| case AR7_CHIP_7300: |
| dsp_clk.rate = tnetd7300_dsp_clock(); |
| tnetd7300_init_clocks(); |
| break; |
| default: |
| break; |
| } |
| /* adjust vbus clock rate */ |
| vbus_clk.rate = bus_clk.rate / 2; |
| } |