| /* linux/drivers/mmc/host/sdhci-pxa.c |
| * |
| * Copyright (C) 2010 Marvell International Ltd. |
| * Zhangfei Gao <zhangfei.gao@marvell.com> |
| * Kevin Wang <dwang4@marvell.com> |
| * Mingwei Wang <mwwang@marvell.com> |
| * Philip Rakity <prakity@marvell.com> |
| * Mark Brown <markb@marvell.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /* Supports: |
| * SDHCI support for MMP2/PXA910/PXA168 |
| * |
| * Refer to sdhci-s3c.c. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/mmc/host.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/err.h> |
| #include <plat/sdhci.h> |
| #include "sdhci.h" |
| |
| #define DRIVER_NAME "sdhci-pxa" |
| |
| #define SD_FIFO_PARAM 0x104 |
| #define DIS_PAD_SD_CLK_GATE 0x400 |
| |
| struct sdhci_pxa { |
| struct sdhci_host *host; |
| struct sdhci_pxa_platdata *pdata; |
| struct clk *clk; |
| struct resource *res; |
| |
| u8 clk_enable; |
| }; |
| |
| /*****************************************************************************\ |
| * * |
| * SDHCI core callbacks * |
| * * |
| \*****************************************************************************/ |
| static void set_clock(struct sdhci_host *host, unsigned int clock) |
| { |
| struct sdhci_pxa *pxa = sdhci_priv(host); |
| u32 tmp = 0; |
| |
| if (clock == 0) { |
| if (pxa->clk_enable) { |
| clk_disable(pxa->clk); |
| pxa->clk_enable = 0; |
| } |
| } else { |
| if (0 == pxa->clk_enable) { |
| if (pxa->pdata->flags & PXA_FLAG_DISABLE_CLOCK_GATING) { |
| tmp = readl(host->ioaddr + SD_FIFO_PARAM); |
| tmp |= DIS_PAD_SD_CLK_GATE; |
| writel(tmp, host->ioaddr + SD_FIFO_PARAM); |
| } |
| clk_enable(pxa->clk); |
| pxa->clk_enable = 1; |
| } |
| } |
| } |
| |
| static struct sdhci_ops sdhci_pxa_ops = { |
| .set_clock = set_clock, |
| }; |
| |
| /*****************************************************************************\ |
| * * |
| * Device probing/removal * |
| * * |
| \*****************************************************************************/ |
| |
| static int __devinit sdhci_pxa_probe(struct platform_device *pdev) |
| { |
| struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; |
| struct device *dev = &pdev->dev; |
| struct sdhci_host *host = NULL; |
| struct resource *iomem = NULL; |
| struct sdhci_pxa *pxa = NULL; |
| int ret, irq; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(dev, "no irq specified\n"); |
| return irq; |
| } |
| |
| iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!iomem) { |
| dev_err(dev, "no memory specified\n"); |
| return -ENOENT; |
| } |
| |
| host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pxa)); |
| if (IS_ERR(host)) { |
| dev_err(dev, "failed to alloc host\n"); |
| return PTR_ERR(host); |
| } |
| |
| pxa = sdhci_priv(host); |
| pxa->host = host; |
| pxa->pdata = pdata; |
| pxa->clk_enable = 0; |
| |
| pxa->clk = clk_get(dev, "PXA-SDHCLK"); |
| if (IS_ERR(pxa->clk)) { |
| dev_err(dev, "failed to get io clock\n"); |
| ret = PTR_ERR(pxa->clk); |
| goto out; |
| } |
| |
| pxa->res = request_mem_region(iomem->start, resource_size(iomem), |
| mmc_hostname(host->mmc)); |
| if (!pxa->res) { |
| dev_err(&pdev->dev, "cannot request region\n"); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| host->ioaddr = ioremap(iomem->start, resource_size(iomem)); |
| if (!host->ioaddr) { |
| dev_err(&pdev->dev, "failed to remap registers\n"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| host->hw_name = "MMC"; |
| host->ops = &sdhci_pxa_ops; |
| host->irq = irq; |
| host->quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; |
| |
| if (pdata->quirks) |
| host->quirks |= pdata->quirks; |
| |
| /* If slot design supports 8 bit data, indicate this to MMC. */ |
| if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) |
| host->mmc->caps |= MMC_CAP_8_BIT_DATA; |
| |
| ret = sdhci_add_host(host); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to add host\n"); |
| goto out; |
| } |
| |
| if (pxa->pdata->max_speed) |
| host->mmc->f_max = pxa->pdata->max_speed; |
| |
| platform_set_drvdata(pdev, host); |
| |
| return 0; |
| out: |
| if (host) { |
| clk_put(pxa->clk); |
| if (host->ioaddr) |
| iounmap(host->ioaddr); |
| if (pxa->res) |
| release_mem_region(pxa->res->start, |
| resource_size(pxa->res)); |
| sdhci_free_host(host); |
| } |
| |
| return ret; |
| } |
| |
| static int __devexit sdhci_pxa_remove(struct platform_device *pdev) |
| { |
| struct sdhci_host *host = platform_get_drvdata(pdev); |
| struct sdhci_pxa *pxa = sdhci_priv(host); |
| int dead = 0; |
| u32 scratch; |
| |
| if (host) { |
| scratch = readl(host->ioaddr + SDHCI_INT_STATUS); |
| if (scratch == (u32)-1) |
| dead = 1; |
| |
| sdhci_remove_host(host, dead); |
| |
| if (host->ioaddr) |
| iounmap(host->ioaddr); |
| if (pxa->res) |
| release_mem_region(pxa->res->start, |
| resource_size(pxa->res)); |
| if (pxa->clk_enable) { |
| clk_disable(pxa->clk); |
| pxa->clk_enable = 0; |
| } |
| clk_put(pxa->clk); |
| |
| sdhci_free_host(host); |
| platform_set_drvdata(pdev, NULL); |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int sdhci_pxa_suspend(struct platform_device *dev, pm_message_t state) |
| { |
| struct sdhci_host *host = platform_get_drvdata(dev); |
| |
| return sdhci_suspend_host(host, state); |
| } |
| |
| static int sdhci_pxa_resume(struct platform_device *dev) |
| { |
| struct sdhci_host *host = platform_get_drvdata(dev); |
| |
| return sdhci_resume_host(host); |
| } |
| #else |
| #define sdhci_pxa_suspend NULL |
| #define sdhci_pxa_resume NULL |
| #endif |
| |
| static struct platform_driver sdhci_pxa_driver = { |
| .probe = sdhci_pxa_probe, |
| .remove = __devexit_p(sdhci_pxa_remove), |
| .suspend = sdhci_pxa_suspend, |
| .resume = sdhci_pxa_resume, |
| .driver = { |
| .name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| /*****************************************************************************\ |
| * * |
| * Driver init/exit * |
| * * |
| \*****************************************************************************/ |
| |
| static int __init sdhci_pxa_init(void) |
| { |
| return platform_driver_register(&sdhci_pxa_driver); |
| } |
| |
| static void __exit sdhci_pxa_exit(void) |
| { |
| platform_driver_unregister(&sdhci_pxa_driver); |
| } |
| |
| module_init(sdhci_pxa_init); |
| module_exit(sdhci_pxa_exit); |
| |
| MODULE_DESCRIPTION("SDH controller driver for PXA168/PXA910/MMP2"); |
| MODULE_AUTHOR("Zhangfei Gao <zhangfei.gao@marvell.com>"); |
| MODULE_LICENSE("GPL v2"); |