| /* |
| * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix |
| * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/usb/otg.h> |
| #include <linux/slab.h> |
| |
| #include <mach/mxc_ehci.h> |
| |
| #define ULPI_VIEWPORT_OFFSET 0x170 |
| |
| struct ehci_mxc_priv { |
| struct clk *usbclk, *ahbclk; |
| struct usb_hcd *hcd; |
| }; |
| |
| /* called during probe() after chip reset completes */ |
| static int ehci_mxc_setup(struct usb_hcd *hcd) |
| { |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| struct device *dev = hcd->self.controller; |
| struct mxc_usbh_platform_data *pdata = dev_get_platdata(dev); |
| int retval; |
| |
| /* EHCI registers start at offset 0x100 */ |
| ehci->caps = hcd->regs + 0x100; |
| ehci->regs = hcd->regs + 0x100 + |
| HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); |
| dbg_hcs_params(ehci, "reset"); |
| dbg_hcc_params(ehci, "reset"); |
| |
| /* cache this readonly data; minimize chip reads */ |
| ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); |
| |
| hcd->has_tt = 1; |
| |
| retval = ehci_halt(ehci); |
| if (retval) |
| return retval; |
| |
| /* data structure init */ |
| retval = ehci_init(hcd); |
| if (retval) |
| return retval; |
| |
| ehci->sbrn = 0x20; |
| |
| ehci_reset(ehci); |
| |
| /* set up the PORTSCx register */ |
| ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]); |
| |
| /* is this really needed? */ |
| msleep(10); |
| |
| ehci_port_power(ehci, 0); |
| return 0; |
| } |
| |
| static const struct hc_driver ehci_mxc_hc_driver = { |
| .description = hcd_name, |
| .product_desc = "Freescale On-Chip EHCI Host Controller", |
| .hcd_priv_size = sizeof(struct ehci_hcd), |
| |
| /* |
| * generic hardware linkage |
| */ |
| .irq = ehci_irq, |
| .flags = HCD_USB2 | HCD_MEMORY, |
| |
| /* |
| * basic lifecycle operations |
| */ |
| .reset = ehci_mxc_setup, |
| .start = ehci_run, |
| .stop = ehci_stop, |
| .shutdown = ehci_shutdown, |
| |
| /* |
| * managing i/o requests and associated device resources |
| */ |
| .urb_enqueue = ehci_urb_enqueue, |
| .urb_dequeue = ehci_urb_dequeue, |
| .endpoint_disable = ehci_endpoint_disable, |
| |
| /* |
| * scheduling support |
| */ |
| .get_frame_number = ehci_get_frame, |
| |
| /* |
| * root hub support |
| */ |
| .hub_status_data = ehci_hub_status_data, |
| .hub_control = ehci_hub_control, |
| .bus_suspend = ehci_bus_suspend, |
| .bus_resume = ehci_bus_resume, |
| .relinquish_port = ehci_relinquish_port, |
| .port_handed_over = ehci_port_handed_over, |
| }; |
| |
| static int ehci_mxc_drv_probe(struct platform_device *pdev) |
| { |
| struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data; |
| struct usb_hcd *hcd; |
| struct resource *res; |
| int irq, ret; |
| struct ehci_mxc_priv *priv; |
| struct device *dev = &pdev->dev; |
| |
| dev_info(&pdev->dev, "initializing i.MX USB Controller\n"); |
| |
| if (!pdata) { |
| dev_err(dev, "No platform data given, bailing out.\n"); |
| return -EINVAL; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| |
| hcd = usb_create_hcd(&ehci_mxc_hc_driver, dev, dev_name(dev)); |
| if (!hcd) |
| return -ENOMEM; |
| |
| priv = kzalloc(sizeof(*priv), GFP_KERNEL); |
| if (!priv) { |
| ret = -ENOMEM; |
| goto err_alloc; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(dev, "Found HC with no register addr. Check setup!\n"); |
| ret = -ENODEV; |
| goto err_get_resource; |
| } |
| |
| hcd->rsrc_start = res->start; |
| hcd->rsrc_len = resource_size(res); |
| |
| if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { |
| dev_dbg(dev, "controller already in use\n"); |
| ret = -EBUSY; |
| goto err_request_mem; |
| } |
| |
| hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); |
| if (!hcd->regs) { |
| dev_err(dev, "error mapping memory\n"); |
| ret = -EFAULT; |
| goto err_ioremap; |
| } |
| |
| /* call platform specific init function */ |
| if (pdata->init) { |
| ret = pdata->init(pdev); |
| if (ret) { |
| dev_err(dev, "platform init failed\n"); |
| goto err_init; |
| } |
| /* platforms need some time to settle changed IO settings */ |
| mdelay(10); |
| } |
| |
| /* enable clocks */ |
| priv->usbclk = clk_get(dev, "usb"); |
| if (IS_ERR(priv->usbclk)) { |
| ret = PTR_ERR(priv->usbclk); |
| goto err_clk; |
| } |
| clk_enable(priv->usbclk); |
| |
| if (!cpu_is_mx35() && !cpu_is_mx25()) { |
| priv->ahbclk = clk_get(dev, "usb_ahb"); |
| if (IS_ERR(priv->ahbclk)) { |
| ret = PTR_ERR(priv->ahbclk); |
| goto err_clk_ahb; |
| } |
| clk_enable(priv->ahbclk); |
| } |
| |
| /* setup specific usb hw */ |
| ret = mxc_initialize_usb_hw(pdev->id, pdata->flags); |
| if (ret < 0) |
| goto err_init; |
| |
| /* Initialize the transceiver */ |
| if (pdata->otg) { |
| pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET; |
| ret = otg_init(pdata->otg); |
| if (ret) { |
| dev_err(dev, "unable to init transceiver, probably missing\n"); |
| ret = -ENODEV; |
| goto err_add; |
| } |
| ret = otg_set_vbus(pdata->otg, 1); |
| if (ret) { |
| dev_err(dev, "unable to enable vbus on transceiver\n"); |
| goto err_add; |
| } |
| } |
| |
| priv->hcd = hcd; |
| platform_set_drvdata(pdev, priv); |
| |
| ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); |
| if (ret) |
| goto err_add; |
| |
| return 0; |
| |
| err_add: |
| if (pdata && pdata->exit) |
| pdata->exit(pdev); |
| err_init: |
| if (priv->ahbclk) { |
| clk_disable(priv->ahbclk); |
| clk_put(priv->ahbclk); |
| } |
| err_clk_ahb: |
| clk_disable(priv->usbclk); |
| clk_put(priv->usbclk); |
| err_clk: |
| iounmap(hcd->regs); |
| err_ioremap: |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| err_request_mem: |
| err_get_resource: |
| kfree(priv); |
| err_alloc: |
| usb_put_hcd(hcd); |
| return ret; |
| } |
| |
| static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) |
| { |
| struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data; |
| struct ehci_mxc_priv *priv = platform_get_drvdata(pdev); |
| struct usb_hcd *hcd = priv->hcd; |
| |
| if (pdata && pdata->exit) |
| pdata->exit(pdev); |
| |
| if (pdata->otg) |
| otg_shutdown(pdata->otg); |
| |
| usb_remove_hcd(hcd); |
| iounmap(hcd->regs); |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| usb_put_hcd(hcd); |
| platform_set_drvdata(pdev, NULL); |
| |
| clk_disable(priv->usbclk); |
| clk_put(priv->usbclk); |
| if (priv->ahbclk) { |
| clk_disable(priv->ahbclk); |
| clk_put(priv->ahbclk); |
| } |
| |
| kfree(priv); |
| |
| return 0; |
| } |
| |
| static void ehci_mxc_drv_shutdown(struct platform_device *pdev) |
| { |
| struct ehci_mxc_priv *priv = platform_get_drvdata(pdev); |
| struct usb_hcd *hcd = priv->hcd; |
| |
| if (hcd->driver->shutdown) |
| hcd->driver->shutdown(hcd); |
| } |
| |
| MODULE_ALIAS("platform:mxc-ehci"); |
| |
| static struct platform_driver ehci_mxc_driver = { |
| .probe = ehci_mxc_drv_probe, |
| .remove = __exit_p(ehci_mxc_drv_remove), |
| .shutdown = ehci_mxc_drv_shutdown, |
| .driver = { |
| .name = "mxc-ehci", |
| }, |
| }; |