| /* |
| * This file is part of the APDS990x sensor driver. |
| * Chip is combined proximity and ambient light sensor. |
| * |
| * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). |
| * |
| * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/mutex.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/delay.h> |
| #include <linux/wait.h> |
| #include <linux/slab.h> |
| #include <linux/platform_data/apds990x.h> |
| |
| /* Register map */ |
| #define APDS990X_ENABLE 0x00 /* Enable of states and interrupts */ |
| #define APDS990X_ATIME 0x01 /* ALS ADC time */ |
| #define APDS990X_PTIME 0x02 /* Proximity ADC time */ |
| #define APDS990X_WTIME 0x03 /* Wait time */ |
| #define APDS990X_AILTL 0x04 /* ALS interrupt low threshold low byte */ |
| #define APDS990X_AILTH 0x05 /* ALS interrupt low threshold hi byte */ |
| #define APDS990X_AIHTL 0x06 /* ALS interrupt hi threshold low byte */ |
| #define APDS990X_AIHTH 0x07 /* ALS interrupt hi threshold hi byte */ |
| #define APDS990X_PILTL 0x08 /* Proximity interrupt low threshold low byte */ |
| #define APDS990X_PILTH 0x09 /* Proximity interrupt low threshold hi byte */ |
| #define APDS990X_PIHTL 0x0a /* Proximity interrupt hi threshold low byte */ |
| #define APDS990X_PIHTH 0x0b /* Proximity interrupt hi threshold hi byte */ |
| #define APDS990X_PERS 0x0c /* Interrupt persistence filters */ |
| #define APDS990X_CONFIG 0x0d /* Configuration */ |
| #define APDS990X_PPCOUNT 0x0e /* Proximity pulse count */ |
| #define APDS990X_CONTROL 0x0f /* Gain control register */ |
| #define APDS990X_REV 0x11 /* Revision Number */ |
| #define APDS990X_ID 0x12 /* Device ID */ |
| #define APDS990X_STATUS 0x13 /* Device status */ |
| #define APDS990X_CDATAL 0x14 /* Clear ADC low data register */ |
| #define APDS990X_CDATAH 0x15 /* Clear ADC high data register */ |
| #define APDS990X_IRDATAL 0x16 /* IR ADC low data register */ |
| #define APDS990X_IRDATAH 0x17 /* IR ADC high data register */ |
| #define APDS990X_PDATAL 0x18 /* Proximity ADC low data register */ |
| #define APDS990X_PDATAH 0x19 /* Proximity ADC high data register */ |
| |
| /* Control */ |
| #define APDS990X_MAX_AGAIN 3 |
| |
| /* Enable register */ |
| #define APDS990X_EN_PIEN (0x1 << 5) |
| #define APDS990X_EN_AIEN (0x1 << 4) |
| #define APDS990X_EN_WEN (0x1 << 3) |
| #define APDS990X_EN_PEN (0x1 << 2) |
| #define APDS990X_EN_AEN (0x1 << 1) |
| #define APDS990X_EN_PON (0x1 << 0) |
| #define APDS990X_EN_DISABLE_ALL 0 |
| |
| /* Status register */ |
| #define APDS990X_ST_PINT (0x1 << 5) |
| #define APDS990X_ST_AINT (0x1 << 4) |
| |
| /* I2C access types */ |
| #define APDS990x_CMD_TYPE_MASK (0x03 << 5) |
| #define APDS990x_CMD_TYPE_RB (0x00 << 5) /* Repeated byte */ |
| #define APDS990x_CMD_TYPE_INC (0x01 << 5) /* Auto increment */ |
| #define APDS990x_CMD_TYPE_SPE (0x03 << 5) /* Special function */ |
| |
| #define APDS990x_ADDR_SHIFT 0 |
| #define APDS990x_CMD 0x80 |
| |
| /* Interrupt ack commands */ |
| #define APDS990X_INT_ACK_ALS 0x6 |
| #define APDS990X_INT_ACK_PS 0x5 |
| #define APDS990X_INT_ACK_BOTH 0x7 |
| |
| /* ptime */ |
| #define APDS990X_PTIME_DEFAULT 0xff /* Recommended conversion time 2.7ms*/ |
| |
| /* wtime */ |
| #define APDS990X_WTIME_DEFAULT 0xee /* ~50ms wait time */ |
| |
| #define APDS990X_TIME_TO_ADC 1024 /* One timetick as ADC count value */ |
| |
| /* Persistence */ |
| #define APDS990X_APERS_SHIFT 0 |
| #define APDS990X_PPERS_SHIFT 4 |
| |
| /* Supported ID:s */ |
| #define APDS990X_ID_0 0x0 |
| #define APDS990X_ID_4 0x4 |
| #define APDS990X_ID_29 0x29 |
| |
| /* pgain and pdiode settings */ |
| #define APDS_PGAIN_1X 0x0 |
| #define APDS_PDIODE_IR 0x2 |
| |
| #define APDS990X_LUX_OUTPUT_SCALE 10 |
| |
| /* Reverse chip factors for threshold calculation */ |
| struct reverse_factors { |
| u32 afactor; |
| int cf1; |
| int irf1; |
| int cf2; |
| int irf2; |
| }; |
| |
| struct apds990x_chip { |
| struct apds990x_platform_data *pdata; |
| struct i2c_client *client; |
| struct mutex mutex; /* avoid parallel access */ |
| struct regulator_bulk_data regs[2]; |
| wait_queue_head_t wait; |
| |
| int prox_en; |
| bool prox_continuous_mode; |
| bool lux_wait_fresh_res; |
| |
| /* Chip parameters */ |
| struct apds990x_chip_factors cf; |
| struct reverse_factors rcf; |
| u16 atime; /* als integration time */ |
| u16 arate; /* als reporting rate */ |
| u16 a_max_result; /* Max possible ADC value with current atime */ |
| u8 again_meas; /* Gain used in last measurement */ |
| u8 again_next; /* Next calculated gain */ |
| u8 pgain; |
| u8 pdiode; |
| u8 pdrive; |
| u8 lux_persistence; |
| u8 prox_persistence; |
| |
| u32 lux_raw; |
| u32 lux; |
| u16 lux_clear; |
| u16 lux_ir; |
| u16 lux_calib; |
| u32 lux_thres_hi; |
| u32 lux_thres_lo; |
| |
| u32 prox_thres; |
| u16 prox_data; |
| u16 prox_calib; |
| |
| char chipname[10]; |
| u8 revision; |
| }; |
| |
| #define APDS_CALIB_SCALER 8192 |
| #define APDS_LUX_NEUTRAL_CALIB_VALUE (1 * APDS_CALIB_SCALER) |
| #define APDS_PROX_NEUTRAL_CALIB_VALUE (1 * APDS_CALIB_SCALER) |
| |
| #define APDS_PROX_DEF_THRES 600 |
| #define APDS_PROX_HYSTERESIS 50 |
| #define APDS_LUX_DEF_THRES_HI 101 |
| #define APDS_LUX_DEF_THRES_LO 100 |
| #define APDS_DEFAULT_PROX_PERS 1 |
| |
| #define APDS_TIMEOUT 2000 |
| #define APDS_STARTUP_DELAY 25000 /* us */ |
| #define APDS_RANGE 65535 |
| #define APDS_PROX_RANGE 1023 |
| #define APDS_LUX_GAIN_LO_LIMIT 100 |
| #define APDS_LUX_GAIN_LO_LIMIT_STRICT 25 |
| |
| #define TIMESTEP 87 /* 2.7ms is about 87 / 32 */ |
| #define TIME_STEP_SCALER 32 |
| |
| #define APDS_LUX_AVERAGING_TIME 50 /* tolerates 50/60Hz ripple */ |
| #define APDS_LUX_DEFAULT_RATE 200 |
| |
| static const u8 again[] = {1, 8, 16, 120}; /* ALS gain steps */ |
| static const u8 ir_currents[] = {100, 50, 25, 12}; /* IRled currents in mA */ |
| |
| /* Following two tables must match i.e 10Hz rate means 1 as persistence value */ |
| static const u16 arates_hz[] = {10, 5, 2, 1}; |
| static const u8 apersis[] = {1, 2, 4, 5}; |
| |
| /* Regulators */ |
| static const char reg_vcc[] = "Vdd"; |
| static const char reg_vled[] = "Vled"; |
| |
| static int apds990x_read_byte(struct apds990x_chip *chip, u8 reg, u8 *data) |
| { |
| struct i2c_client *client = chip->client; |
| s32 ret; |
| |
| reg &= ~APDS990x_CMD_TYPE_MASK; |
| reg |= APDS990x_CMD | APDS990x_CMD_TYPE_RB; |
| |
| ret = i2c_smbus_read_byte_data(client, reg); |
| *data = ret; |
| return (int)ret; |
| } |
| |
| static int apds990x_read_word(struct apds990x_chip *chip, u8 reg, u16 *data) |
| { |
| struct i2c_client *client = chip->client; |
| s32 ret; |
| |
| reg &= ~APDS990x_CMD_TYPE_MASK; |
| reg |= APDS990x_CMD | APDS990x_CMD_TYPE_INC; |
| |
| ret = i2c_smbus_read_word_data(client, reg); |
| *data = ret; |
| return (int)ret; |
| } |
| |
| static int apds990x_write_byte(struct apds990x_chip *chip, u8 reg, u8 data) |
| { |
| struct i2c_client *client = chip->client; |
| s32 ret; |
| |
| reg &= ~APDS990x_CMD_TYPE_MASK; |
| reg |= APDS990x_CMD | APDS990x_CMD_TYPE_RB; |
| |
| ret = i2c_smbus_write_byte_data(client, reg, data); |
| return (int)ret; |
| } |
| |
| static int apds990x_write_word(struct apds990x_chip *chip, u8 reg, u16 data) |
| { |
| struct i2c_client *client = chip->client; |
| s32 ret; |
| |
| reg &= ~APDS990x_CMD_TYPE_MASK; |
| reg |= APDS990x_CMD | APDS990x_CMD_TYPE_INC; |
| |
| ret = i2c_smbus_write_word_data(client, reg, data); |
| return (int)ret; |
| } |
| |
| static int apds990x_mode_on(struct apds990x_chip *chip) |
| { |
| /* ALS is mandatory, proximity optional */ |
| u8 reg = APDS990X_EN_AIEN | APDS990X_EN_PON | APDS990X_EN_AEN | |
| APDS990X_EN_WEN; |
| |
| if (chip->prox_en) |
| reg |= APDS990X_EN_PIEN | APDS990X_EN_PEN; |
| |
| return apds990x_write_byte(chip, APDS990X_ENABLE, reg); |
| } |
| |
| static u16 apds990x_lux_to_threshold(struct apds990x_chip *chip, u32 lux) |
| { |
| u32 thres; |
| u32 cpl; |
| u32 ir; |
| |
| if (lux == 0) |
| return 0; |
| else if (lux == APDS_RANGE) |
| return APDS_RANGE; |
| |
| /* |
| * Reported LUX value is a combination of the IR and CLEAR channel |
| * values. However, interrupt threshold is only for clear channel. |
| * This function approximates needed HW threshold value for a given |
| * LUX value in the current lightning type. |
| * IR level compared to visible light varies heavily depending on the |
| * source of the light |
| * |
| * Calculate threshold value for the next measurement period. |
| * Math: threshold = lux * cpl where |
| * cpl = atime * again / (glass_attenuation * device_factor) |
| * (count-per-lux) |
| * |
| * First remove calibration. Division by four is to avoid overflow |
| */ |
| lux = lux * (APDS_CALIB_SCALER / 4) / (chip->lux_calib / 4); |
| |
| /* Multiplication by 64 is to increase accuracy */ |
| cpl = ((u32)chip->atime * (u32)again[chip->again_next] * |
| APDS_PARAM_SCALE * 64) / (chip->cf.ga * chip->cf.df); |
| |
| thres = lux * cpl / 64; |
| /* |
| * Convert IR light from the latest result to match with |
| * new gain step. This helps to adapt with the current |
| * source of light. |
| */ |
| ir = (u32)chip->lux_ir * (u32)again[chip->again_next] / |
| (u32)again[chip->again_meas]; |
| |
| /* |
| * Compensate count with IR light impact |
| * IAC1 > IAC2 (see apds990x_get_lux for formulas) |
| */ |
| if (chip->lux_clear * APDS_PARAM_SCALE >= |
| chip->rcf.afactor * chip->lux_ir) |
| thres = (chip->rcf.cf1 * thres + chip->rcf.irf1 * ir) / |
| APDS_PARAM_SCALE; |
| else |
| thres = (chip->rcf.cf2 * thres + chip->rcf.irf2 * ir) / |
| APDS_PARAM_SCALE; |
| |
| if (thres >= chip->a_max_result) |
| thres = chip->a_max_result - 1; |
| return thres; |
| } |
| |
| static inline int apds990x_set_atime(struct apds990x_chip *chip, u32 time_ms) |
| { |
| u8 reg_value; |
| |
| chip->atime = time_ms; |
| /* Formula is specified in the data sheet */ |
| reg_value = 256 - ((time_ms * TIME_STEP_SCALER) / TIMESTEP); |
| /* Calculate max ADC value for given integration time */ |
| chip->a_max_result = (u16)(256 - reg_value) * APDS990X_TIME_TO_ADC; |
| return apds990x_write_byte(chip, APDS990X_ATIME, reg_value); |
| } |
| |
| /* Called always with mutex locked */ |
| static int apds990x_refresh_pthres(struct apds990x_chip *chip, int data) |
| { |
| int ret, lo, hi; |
| |
| /* If the chip is not in use, don't try to access it */ |
| if (pm_runtime_suspended(&chip->client->dev)) |
| return 0; |
| |
| if (data < chip->prox_thres) { |
| lo = 0; |
| hi = chip->prox_thres; |
| } else { |
| lo = chip->prox_thres - APDS_PROX_HYSTERESIS; |
| if (chip->prox_continuous_mode) |
| hi = chip->prox_thres; |
| else |
| hi = APDS_RANGE; |
| } |
| |
| ret = apds990x_write_word(chip, APDS990X_PILTL, lo); |
| ret |= apds990x_write_word(chip, APDS990X_PIHTL, hi); |
| return ret; |
| } |
| |
| /* Called always with mutex locked */ |
| static int apds990x_refresh_athres(struct apds990x_chip *chip) |
| { |
| int ret; |
| /* If the chip is not in use, don't try to access it */ |
| if (pm_runtime_suspended(&chip->client->dev)) |
| return 0; |
| |
| ret = apds990x_write_word(chip, APDS990X_AILTL, |
| apds990x_lux_to_threshold(chip, chip->lux_thres_lo)); |
| ret |= apds990x_write_word(chip, APDS990X_AIHTL, |
| apds990x_lux_to_threshold(chip, chip->lux_thres_hi)); |
| |
| return ret; |
| } |
| |
| /* Called always with mutex locked */ |
| static void apds990x_force_a_refresh(struct apds990x_chip *chip) |
| { |
| /* This will force ALS interrupt after the next measurement. */ |
| apds990x_write_word(chip, APDS990X_AILTL, APDS_LUX_DEF_THRES_LO); |
| apds990x_write_word(chip, APDS990X_AIHTL, APDS_LUX_DEF_THRES_HI); |
| } |
| |
| /* Called always with mutex locked */ |
| static void apds990x_force_p_refresh(struct apds990x_chip *chip) |
| { |
| /* This will force proximity interrupt after the next measurement. */ |
| apds990x_write_word(chip, APDS990X_PILTL, APDS_PROX_DEF_THRES - 1); |
| apds990x_write_word(chip, APDS990X_PIHTL, APDS_PROX_DEF_THRES); |
| } |
| |
| /* Called always with mutex locked */ |
| static int apds990x_calc_again(struct apds990x_chip *chip) |
| { |
| int curr_again = chip->again_meas; |
| int next_again = chip->again_meas; |
| int ret = 0; |
| |
| /* Calculate suitable als gain */ |
| if (chip->lux_clear == chip->a_max_result) |
| next_again -= 2; /* ALS saturated. Decrease gain by 2 steps */ |
| else if (chip->lux_clear > chip->a_max_result / 2) |
| next_again--; |
| else if (chip->lux_clear < APDS_LUX_GAIN_LO_LIMIT_STRICT) |
| next_again += 2; /* Too dark. Increase gain by 2 steps */ |
| else if (chip->lux_clear < APDS_LUX_GAIN_LO_LIMIT) |
| next_again++; |
| |
| /* Limit gain to available range */ |
| if (next_again < 0) |
| next_again = 0; |
| else if (next_again > APDS990X_MAX_AGAIN) |
| next_again = APDS990X_MAX_AGAIN; |
| |
| /* Let's check can we trust the measured result */ |
| if (chip->lux_clear == chip->a_max_result) |
| /* Result can be totally garbage due to saturation */ |
| ret = -ERANGE; |
| else if (next_again != curr_again && |
| chip->lux_clear < APDS_LUX_GAIN_LO_LIMIT_STRICT) |
| /* |
| * Gain is changed and measurement result is very small. |
| * Result can be totally garbage due to underflow |
| */ |
| ret = -ERANGE; |
| |
| chip->again_next = next_again; |
| apds990x_write_byte(chip, APDS990X_CONTROL, |
| (chip->pdrive << 6) | |
| (chip->pdiode << 4) | |
| (chip->pgain << 2) | |
| (chip->again_next << 0)); |
| |
| /* |
| * Error means bad result -> re-measurement is needed. The forced |
| * refresh uses fastest possible persistence setting to get result |
| * as soon as possible. |
| */ |
| if (ret < 0) |
| apds990x_force_a_refresh(chip); |
| else |
| apds990x_refresh_athres(chip); |
| |
| return ret; |
| } |
| |
| /* Called always with mutex locked */ |
| static int apds990x_get_lux(struct apds990x_chip *chip, int clear, int ir) |
| { |
| int iac, iac1, iac2; /* IR adjusted counts */ |
| u32 lpc; /* Lux per count */ |
| |
| /* Formulas: |
| * iac1 = CF1 * CLEAR_CH - IRF1 * IR_CH |
| * iac2 = CF2 * CLEAR_CH - IRF2 * IR_CH |
| */ |
| iac1 = (chip->cf.cf1 * clear - chip->cf.irf1 * ir) / APDS_PARAM_SCALE; |
| iac2 = (chip->cf.cf2 * clear - chip->cf.irf2 * ir) / APDS_PARAM_SCALE; |
| |
| iac = max(iac1, iac2); |
| iac = max(iac, 0); |
| |
| lpc = APDS990X_LUX_OUTPUT_SCALE * (chip->cf.df * chip->cf.ga) / |
| (u32)(again[chip->again_meas] * (u32)chip->atime); |
| |
| return (iac * lpc) / APDS_PARAM_SCALE; |
| } |
| |
| static int apds990x_ack_int(struct apds990x_chip *chip, u8 mode) |
| { |
| struct i2c_client *client = chip->client; |
| s32 ret; |
| u8 reg = APDS990x_CMD | APDS990x_CMD_TYPE_SPE; |
| |
| switch (mode & (APDS990X_ST_AINT | APDS990X_ST_PINT)) { |
| case APDS990X_ST_AINT: |
| reg |= APDS990X_INT_ACK_ALS; |
| break; |
| case APDS990X_ST_PINT: |
| reg |= APDS990X_INT_ACK_PS; |
| break; |
| default: |
| reg |= APDS990X_INT_ACK_BOTH; |
| break; |
| } |
| |
| ret = i2c_smbus_read_byte_data(client, reg); |
| return (int)ret; |
| } |
| |
| static irqreturn_t apds990x_irq(int irq, void *data) |
| { |
| struct apds990x_chip *chip = data; |
| u8 status; |
| |
| apds990x_read_byte(chip, APDS990X_STATUS, &status); |
| apds990x_ack_int(chip, status); |
| |
| mutex_lock(&chip->mutex); |
| if (!pm_runtime_suspended(&chip->client->dev)) { |
| if (status & APDS990X_ST_AINT) { |
| apds990x_read_word(chip, APDS990X_CDATAL, |
| &chip->lux_clear); |
| apds990x_read_word(chip, APDS990X_IRDATAL, |
| &chip->lux_ir); |
| /* Store used gain for calculations */ |
| chip->again_meas = chip->again_next; |
| |
| chip->lux_raw = apds990x_get_lux(chip, |
| chip->lux_clear, |
| chip->lux_ir); |
| |
| if (apds990x_calc_again(chip) == 0) { |
| /* Result is valid */ |
| chip->lux = chip->lux_raw; |
| chip->lux_wait_fresh_res = false; |
| wake_up(&chip->wait); |
| sysfs_notify(&chip->client->dev.kobj, |
| NULL, "lux0_input"); |
| } |
| } |
| |
| if ((status & APDS990X_ST_PINT) && chip->prox_en) { |
| u16 clr_ch; |
| |
| apds990x_read_word(chip, APDS990X_CDATAL, &clr_ch); |
| /* |
| * If ALS channel is saturated at min gain, |
| * proximity gives false posivite values. |
| * Just ignore them. |
| */ |
| if (chip->again_meas == 0 && |
| clr_ch == chip->a_max_result) |
| chip->prox_data = 0; |
| else |
| apds990x_read_word(chip, |
| APDS990X_PDATAL, |
| &chip->prox_data); |
| |
| apds990x_refresh_pthres(chip, chip->prox_data); |
| if (chip->prox_data < chip->prox_thres) |
| chip->prox_data = 0; |
| else if (!chip->prox_continuous_mode) |
| chip->prox_data = APDS_PROX_RANGE; |
| sysfs_notify(&chip->client->dev.kobj, |
| NULL, "prox0_raw"); |
| } |
| } |
| mutex_unlock(&chip->mutex); |
| return IRQ_HANDLED; |
| } |
| |
| static int apds990x_configure(struct apds990x_chip *chip) |
| { |
| /* It is recommended to use disabled mode during these operations */ |
| apds990x_write_byte(chip, APDS990X_ENABLE, APDS990X_EN_DISABLE_ALL); |
| |
| /* conversion and wait times for different state machince states */ |
| apds990x_write_byte(chip, APDS990X_PTIME, APDS990X_PTIME_DEFAULT); |
| apds990x_write_byte(chip, APDS990X_WTIME, APDS990X_WTIME_DEFAULT); |
| apds990x_set_atime(chip, APDS_LUX_AVERAGING_TIME); |
| |
| apds990x_write_byte(chip, APDS990X_CONFIG, 0); |
| |
| /* Persistence levels */ |
| apds990x_write_byte(chip, APDS990X_PERS, |
| (chip->lux_persistence << APDS990X_APERS_SHIFT) | |
| (chip->prox_persistence << APDS990X_PPERS_SHIFT)); |
| |
| apds990x_write_byte(chip, APDS990X_PPCOUNT, chip->pdata->ppcount); |
| |
| /* Start with relatively small gain */ |
| chip->again_meas = 1; |
| chip->again_next = 1; |
| apds990x_write_byte(chip, APDS990X_CONTROL, |
| (chip->pdrive << 6) | |
| (chip->pdiode << 4) | |
| (chip->pgain << 2) | |
| (chip->again_next << 0)); |
| return 0; |
| } |
| |
| static int apds990x_detect(struct apds990x_chip *chip) |
| { |
| struct i2c_client *client = chip->client; |
| int ret; |
| u8 id; |
| |
| ret = apds990x_read_byte(chip, APDS990X_ID, &id); |
| if (ret < 0) { |
| dev_err(&client->dev, "ID read failed\n"); |
| return ret; |
| } |
| |
| ret = apds990x_read_byte(chip, APDS990X_REV, &chip->revision); |
| if (ret < 0) { |
| dev_err(&client->dev, "REV read failed\n"); |
| return ret; |
| } |
| |
| switch (id) { |
| case APDS990X_ID_0: |
| case APDS990X_ID_4: |
| case APDS990X_ID_29: |
| snprintf(chip->chipname, sizeof(chip->chipname), "APDS-990x"); |
| break; |
| default: |
| ret = -ENODEV; |
| break; |
| } |
| return ret; |
| } |
| |
| #ifdef CONFIG_PM |
| static int apds990x_chip_on(struct apds990x_chip *chip) |
| { |
| int err = regulator_bulk_enable(ARRAY_SIZE(chip->regs), |
| chip->regs); |
| if (err < 0) |
| return err; |
| |
| usleep_range(APDS_STARTUP_DELAY, 2 * APDS_STARTUP_DELAY); |
| |
| /* Refresh all configs in case of regulators were off */ |
| chip->prox_data = 0; |
| apds990x_configure(chip); |
| apds990x_mode_on(chip); |
| return 0; |
| } |
| #endif |
| |
| static int apds990x_chip_off(struct apds990x_chip *chip) |
| { |
| apds990x_write_byte(chip, APDS990X_ENABLE, APDS990X_EN_DISABLE_ALL); |
| regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs); |
| return 0; |
| } |
| |
| static ssize_t apds990x_lux_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| ssize_t ret; |
| u32 result; |
| long timeout; |
| |
| if (pm_runtime_suspended(dev)) |
| return -EIO; |
| |
| timeout = wait_event_interruptible_timeout(chip->wait, |
| !chip->lux_wait_fresh_res, |
| msecs_to_jiffies(APDS_TIMEOUT)); |
| if (!timeout) |
| return -EIO; |
| |
| mutex_lock(&chip->mutex); |
| result = (chip->lux * chip->lux_calib) / APDS_CALIB_SCALER; |
| if (result > (APDS_RANGE * APDS990X_LUX_OUTPUT_SCALE)) |
| result = APDS_RANGE * APDS990X_LUX_OUTPUT_SCALE; |
| |
| ret = sprintf(buf, "%d.%d\n", |
| result / APDS990X_LUX_OUTPUT_SCALE, |
| result % APDS990X_LUX_OUTPUT_SCALE); |
| mutex_unlock(&chip->mutex); |
| return ret; |
| } |
| |
| static DEVICE_ATTR(lux0_input, S_IRUGO, apds990x_lux_show, NULL); |
| |
| static ssize_t apds990x_lux_range_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%u\n", APDS_RANGE); |
| } |
| |
| static DEVICE_ATTR(lux0_sensor_range, S_IRUGO, apds990x_lux_range_show, NULL); |
| |
| static ssize_t apds990x_lux_calib_format_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%u\n", APDS_CALIB_SCALER); |
| } |
| |
| static DEVICE_ATTR(lux0_calibscale_default, S_IRUGO, |
| apds990x_lux_calib_format_show, NULL); |
| |
| static ssize_t apds990x_lux_calib_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%u\n", chip->lux_calib); |
| } |
| |
| static ssize_t apds990x_lux_calib_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| unsigned long value; |
| int ret; |
| |
| ret = kstrtoul(buf, 0, &value); |
| if (ret) |
| return ret; |
| |
| chip->lux_calib = value; |
| |
| return len; |
| } |
| |
| static DEVICE_ATTR(lux0_calibscale, S_IRUGO | S_IWUSR, apds990x_lux_calib_show, |
| apds990x_lux_calib_store); |
| |
| static ssize_t apds990x_rate_avail(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| int i; |
| int pos = 0; |
| for (i = 0; i < ARRAY_SIZE(arates_hz); i++) |
| pos += sprintf(buf + pos, "%d ", arates_hz[i]); |
| sprintf(buf + pos - 1, "\n"); |
| return pos; |
| } |
| |
| static ssize_t apds990x_rate_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| return sprintf(buf, "%d\n", chip->arate); |
| } |
| |
| static int apds990x_set_arate(struct apds990x_chip *chip, int rate) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(arates_hz); i++) |
| if (rate >= arates_hz[i]) |
| break; |
| |
| if (i == ARRAY_SIZE(arates_hz)) |
| return -EINVAL; |
| |
| /* Pick up corresponding persistence value */ |
| chip->lux_persistence = apersis[i]; |
| chip->arate = arates_hz[i]; |
| |
| /* If the chip is not in use, don't try to access it */ |
| if (pm_runtime_suspended(&chip->client->dev)) |
| return 0; |
| |
| /* Persistence levels */ |
| return apds990x_write_byte(chip, APDS990X_PERS, |
| (chip->lux_persistence << APDS990X_APERS_SHIFT) | |
| (chip->prox_persistence << APDS990X_PPERS_SHIFT)); |
| } |
| |
| static ssize_t apds990x_rate_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| unsigned long value; |
| int ret; |
| |
| ret = kstrtoul(buf, 0, &value); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&chip->mutex); |
| ret = apds990x_set_arate(chip, value); |
| mutex_unlock(&chip->mutex); |
| |
| if (ret < 0) |
| return ret; |
| return len; |
| } |
| |
| static DEVICE_ATTR(lux0_rate_avail, S_IRUGO, apds990x_rate_avail, NULL); |
| |
| static DEVICE_ATTR(lux0_rate, S_IRUGO | S_IWUSR, apds990x_rate_show, |
| apds990x_rate_store); |
| |
| static ssize_t apds990x_prox_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| ssize_t ret; |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| if (pm_runtime_suspended(dev) || !chip->prox_en) |
| return -EIO; |
| |
| mutex_lock(&chip->mutex); |
| ret = sprintf(buf, "%d\n", chip->prox_data); |
| mutex_unlock(&chip->mutex); |
| return ret; |
| } |
| |
| static DEVICE_ATTR(prox0_raw, S_IRUGO, apds990x_prox_show, NULL); |
| |
| static ssize_t apds990x_prox_range_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%u\n", APDS_PROX_RANGE); |
| } |
| |
| static DEVICE_ATTR(prox0_sensor_range, S_IRUGO, apds990x_prox_range_show, NULL); |
| |
| static ssize_t apds990x_prox_enable_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| return sprintf(buf, "%d\n", chip->prox_en); |
| } |
| |
| static ssize_t apds990x_prox_enable_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| unsigned long value; |
| int ret; |
| |
| ret = kstrtoul(buf, 0, &value); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&chip->mutex); |
| |
| if (!chip->prox_en) |
| chip->prox_data = 0; |
| |
| if (value) |
| chip->prox_en++; |
| else if (chip->prox_en > 0) |
| chip->prox_en--; |
| |
| if (!pm_runtime_suspended(dev)) |
| apds990x_mode_on(chip); |
| mutex_unlock(&chip->mutex); |
| return len; |
| } |
| |
| static DEVICE_ATTR(prox0_raw_en, S_IRUGO | S_IWUSR, apds990x_prox_enable_show, |
| apds990x_prox_enable_store); |
| |
| static const char *reporting_modes[] = {"trigger", "periodic"}; |
| |
| static ssize_t apds990x_prox_reporting_mode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| return sprintf(buf, "%s\n", |
| reporting_modes[!!chip->prox_continuous_mode]); |
| } |
| |
| static ssize_t apds990x_prox_reporting_mode_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = sysfs_match_string(reporting_modes, buf); |
| if (ret < 0) |
| return ret; |
| |
| chip->prox_continuous_mode = ret; |
| return len; |
| } |
| |
| static DEVICE_ATTR(prox0_reporting_mode, S_IRUGO | S_IWUSR, |
| apds990x_prox_reporting_mode_show, |
| apds990x_prox_reporting_mode_store); |
| |
| static ssize_t apds990x_prox_reporting_avail_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%s %s\n", reporting_modes[0], reporting_modes[1]); |
| } |
| |
| static DEVICE_ATTR(prox0_reporting_mode_avail, S_IRUGO | S_IWUSR, |
| apds990x_prox_reporting_avail_show, NULL); |
| |
| |
| static ssize_t apds990x_lux_thresh_above_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| return sprintf(buf, "%d\n", chip->lux_thres_hi); |
| } |
| |
| static ssize_t apds990x_lux_thresh_below_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| return sprintf(buf, "%d\n", chip->lux_thres_lo); |
| } |
| |
| static ssize_t apds990x_set_lux_thresh(struct apds990x_chip *chip, u32 *target, |
| const char *buf) |
| { |
| unsigned long thresh; |
| int ret; |
| |
| ret = kstrtoul(buf, 0, &thresh); |
| if (ret) |
| return ret; |
| |
| if (thresh > APDS_RANGE) |
| return -EINVAL; |
| |
| mutex_lock(&chip->mutex); |
| *target = thresh; |
| /* |
| * Don't update values in HW if we are still waiting for |
| * first interrupt to come after device handle open call. |
| */ |
| if (!chip->lux_wait_fresh_res) |
| apds990x_refresh_athres(chip); |
| mutex_unlock(&chip->mutex); |
| return ret; |
| |
| } |
| |
| static ssize_t apds990x_lux_thresh_above_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| int ret = apds990x_set_lux_thresh(chip, &chip->lux_thres_hi, buf); |
| if (ret < 0) |
| return ret; |
| return len; |
| } |
| |
| static ssize_t apds990x_lux_thresh_below_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| int ret = apds990x_set_lux_thresh(chip, &chip->lux_thres_lo, buf); |
| if (ret < 0) |
| return ret; |
| return len; |
| } |
| |
| static DEVICE_ATTR(lux0_thresh_above_value, S_IRUGO | S_IWUSR, |
| apds990x_lux_thresh_above_show, |
| apds990x_lux_thresh_above_store); |
| |
| static DEVICE_ATTR(lux0_thresh_below_value, S_IRUGO | S_IWUSR, |
| apds990x_lux_thresh_below_show, |
| apds990x_lux_thresh_below_store); |
| |
| static ssize_t apds990x_prox_threshold_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| return sprintf(buf, "%d\n", chip->prox_thres); |
| } |
| |
| static ssize_t apds990x_prox_threshold_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| unsigned long value; |
| int ret; |
| |
| ret = kstrtoul(buf, 0, &value); |
| if (ret) |
| return ret; |
| |
| if ((value > APDS_RANGE) || (value == 0) || |
| (value < APDS_PROX_HYSTERESIS)) |
| return -EINVAL; |
| |
| mutex_lock(&chip->mutex); |
| chip->prox_thres = value; |
| |
| apds990x_force_p_refresh(chip); |
| mutex_unlock(&chip->mutex); |
| return len; |
| } |
| |
| static DEVICE_ATTR(prox0_thresh_above_value, S_IRUGO | S_IWUSR, |
| apds990x_prox_threshold_show, |
| apds990x_prox_threshold_store); |
| |
| static ssize_t apds990x_power_state_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%d\n", !pm_runtime_suspended(dev)); |
| return 0; |
| } |
| |
| static ssize_t apds990x_power_state_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| unsigned long value; |
| int ret; |
| |
| ret = kstrtoul(buf, 0, &value); |
| if (ret) |
| return ret; |
| |
| if (value) { |
| pm_runtime_get_sync(dev); |
| mutex_lock(&chip->mutex); |
| chip->lux_wait_fresh_res = true; |
| apds990x_force_a_refresh(chip); |
| apds990x_force_p_refresh(chip); |
| mutex_unlock(&chip->mutex); |
| } else { |
| if (!pm_runtime_suspended(dev)) |
| pm_runtime_put(dev); |
| } |
| return len; |
| } |
| |
| static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR, |
| apds990x_power_state_show, |
| apds990x_power_state_store); |
| |
| static ssize_t apds990x_chip_id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct apds990x_chip *chip = dev_get_drvdata(dev); |
| return sprintf(buf, "%s %d\n", chip->chipname, chip->revision); |
| } |
| |
| static DEVICE_ATTR(chip_id, S_IRUGO, apds990x_chip_id_show, NULL); |
| |
| static struct attribute *sysfs_attrs_ctrl[] = { |
| &dev_attr_lux0_calibscale.attr, |
| &dev_attr_lux0_calibscale_default.attr, |
| &dev_attr_lux0_input.attr, |
| &dev_attr_lux0_sensor_range.attr, |
| &dev_attr_lux0_rate.attr, |
| &dev_attr_lux0_rate_avail.attr, |
| &dev_attr_lux0_thresh_above_value.attr, |
| &dev_attr_lux0_thresh_below_value.attr, |
| &dev_attr_prox0_raw_en.attr, |
| &dev_attr_prox0_raw.attr, |
| &dev_attr_prox0_sensor_range.attr, |
| &dev_attr_prox0_thresh_above_value.attr, |
| &dev_attr_prox0_reporting_mode.attr, |
| &dev_attr_prox0_reporting_mode_avail.attr, |
| &dev_attr_chip_id.attr, |
| &dev_attr_power_state.attr, |
| NULL |
| }; |
| |
| static struct attribute_group apds990x_attribute_group[] = { |
| {.attrs = sysfs_attrs_ctrl }, |
| }; |
| |
| static int apds990x_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct apds990x_chip *chip; |
| int err; |
| |
| chip = kzalloc(sizeof *chip, GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(client, chip); |
| chip->client = client; |
| |
| init_waitqueue_head(&chip->wait); |
| mutex_init(&chip->mutex); |
| chip->pdata = client->dev.platform_data; |
| |
| if (chip->pdata == NULL) { |
| dev_err(&client->dev, "platform data is mandatory\n"); |
| err = -EINVAL; |
| goto fail1; |
| } |
| |
| if (chip->pdata->cf.ga == 0) { |
| /* set uncovered sensor default parameters */ |
| chip->cf.ga = 1966; /* 0.48 * APDS_PARAM_SCALE */ |
| chip->cf.cf1 = 4096; /* 1.00 * APDS_PARAM_SCALE */ |
| chip->cf.irf1 = 9134; /* 2.23 * APDS_PARAM_SCALE */ |
| chip->cf.cf2 = 2867; /* 0.70 * APDS_PARAM_SCALE */ |
| chip->cf.irf2 = 5816; /* 1.42 * APDS_PARAM_SCALE */ |
| chip->cf.df = 52; |
| } else { |
| chip->cf = chip->pdata->cf; |
| } |
| |
| /* precalculate inverse chip factors for threshold control */ |
| chip->rcf.afactor = |
| (chip->cf.irf1 - chip->cf.irf2) * APDS_PARAM_SCALE / |
| (chip->cf.cf1 - chip->cf.cf2); |
| chip->rcf.cf1 = APDS_PARAM_SCALE * APDS_PARAM_SCALE / |
| chip->cf.cf1; |
| chip->rcf.irf1 = chip->cf.irf1 * APDS_PARAM_SCALE / |
| chip->cf.cf1; |
| chip->rcf.cf2 = APDS_PARAM_SCALE * APDS_PARAM_SCALE / |
| chip->cf.cf2; |
| chip->rcf.irf2 = chip->cf.irf2 * APDS_PARAM_SCALE / |
| chip->cf.cf2; |
| |
| /* Set something to start with */ |
| chip->lux_thres_hi = APDS_LUX_DEF_THRES_HI; |
| chip->lux_thres_lo = APDS_LUX_DEF_THRES_LO; |
| chip->lux_calib = APDS_LUX_NEUTRAL_CALIB_VALUE; |
| |
| chip->prox_thres = APDS_PROX_DEF_THRES; |
| chip->pdrive = chip->pdata->pdrive; |
| chip->pdiode = APDS_PDIODE_IR; |
| chip->pgain = APDS_PGAIN_1X; |
| chip->prox_calib = APDS_PROX_NEUTRAL_CALIB_VALUE; |
| chip->prox_persistence = APDS_DEFAULT_PROX_PERS; |
| chip->prox_continuous_mode = false; |
| |
| chip->regs[0].supply = reg_vcc; |
| chip->regs[1].supply = reg_vled; |
| |
| err = regulator_bulk_get(&client->dev, |
| ARRAY_SIZE(chip->regs), chip->regs); |
| if (err < 0) { |
| dev_err(&client->dev, "Cannot get regulators\n"); |
| goto fail1; |
| } |
| |
| err = regulator_bulk_enable(ARRAY_SIZE(chip->regs), chip->regs); |
| if (err < 0) { |
| dev_err(&client->dev, "Cannot enable regulators\n"); |
| goto fail2; |
| } |
| |
| usleep_range(APDS_STARTUP_DELAY, 2 * APDS_STARTUP_DELAY); |
| |
| err = apds990x_detect(chip); |
| if (err < 0) { |
| dev_err(&client->dev, "APDS990X not found\n"); |
| goto fail3; |
| } |
| |
| pm_runtime_set_active(&client->dev); |
| |
| apds990x_configure(chip); |
| apds990x_set_arate(chip, APDS_LUX_DEFAULT_RATE); |
| apds990x_mode_on(chip); |
| |
| pm_runtime_enable(&client->dev); |
| |
| if (chip->pdata->setup_resources) { |
| err = chip->pdata->setup_resources(); |
| if (err) { |
| err = -EINVAL; |
| goto fail3; |
| } |
| } |
| |
| err = sysfs_create_group(&chip->client->dev.kobj, |
| apds990x_attribute_group); |
| if (err < 0) { |
| dev_err(&chip->client->dev, "Sysfs registration failed\n"); |
| goto fail4; |
| } |
| |
| err = request_threaded_irq(client->irq, NULL, |
| apds990x_irq, |
| IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW | |
| IRQF_ONESHOT, |
| "apds990x", chip); |
| if (err) { |
| dev_err(&client->dev, "could not get IRQ %d\n", |
| client->irq); |
| goto fail5; |
| } |
| return err; |
| fail5: |
| sysfs_remove_group(&chip->client->dev.kobj, |
| &apds990x_attribute_group[0]); |
| fail4: |
| if (chip->pdata && chip->pdata->release_resources) |
| chip->pdata->release_resources(); |
| fail3: |
| regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs); |
| fail2: |
| regulator_bulk_free(ARRAY_SIZE(chip->regs), chip->regs); |
| fail1: |
| kfree(chip); |
| return err; |
| } |
| |
| static int apds990x_remove(struct i2c_client *client) |
| { |
| struct apds990x_chip *chip = i2c_get_clientdata(client); |
| |
| free_irq(client->irq, chip); |
| sysfs_remove_group(&chip->client->dev.kobj, |
| apds990x_attribute_group); |
| |
| if (chip->pdata && chip->pdata->release_resources) |
| chip->pdata->release_resources(); |
| |
| if (!pm_runtime_suspended(&client->dev)) |
| apds990x_chip_off(chip); |
| |
| pm_runtime_disable(&client->dev); |
| pm_runtime_set_suspended(&client->dev); |
| |
| regulator_bulk_free(ARRAY_SIZE(chip->regs), chip->regs); |
| |
| kfree(chip); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int apds990x_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct apds990x_chip *chip = i2c_get_clientdata(client); |
| |
| apds990x_chip_off(chip); |
| return 0; |
| } |
| |
| static int apds990x_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct apds990x_chip *chip = i2c_get_clientdata(client); |
| |
| /* |
| * If we were enabled at suspend time, it is expected |
| * everything works nice and smoothly. Chip_on is enough |
| */ |
| apds990x_chip_on(chip); |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_PM |
| static int apds990x_runtime_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct apds990x_chip *chip = i2c_get_clientdata(client); |
| |
| apds990x_chip_off(chip); |
| return 0; |
| } |
| |
| static int apds990x_runtime_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct apds990x_chip *chip = i2c_get_clientdata(client); |
| |
| apds990x_chip_on(chip); |
| return 0; |
| } |
| |
| #endif |
| |
| static const struct i2c_device_id apds990x_id[] = { |
| {"apds990x", 0 }, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, apds990x_id); |
| |
| static const struct dev_pm_ops apds990x_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(apds990x_suspend, apds990x_resume) |
| SET_RUNTIME_PM_OPS(apds990x_runtime_suspend, |
| apds990x_runtime_resume, |
| NULL) |
| }; |
| |
| static struct i2c_driver apds990x_driver = { |
| .driver = { |
| .name = "apds990x", |
| .pm = &apds990x_pm_ops, |
| }, |
| .probe = apds990x_probe, |
| .remove = apds990x_remove, |
| .id_table = apds990x_id, |
| }; |
| |
| module_i2c_driver(apds990x_driver); |
| |
| MODULE_DESCRIPTION("APDS990X combined ALS and proximity sensor"); |
| MODULE_AUTHOR("Samu Onkalo, Nokia Corporation"); |
| MODULE_LICENSE("GPL v2"); |