| /* |
| * Auvitek AU0828 USB Bridge (Analog video support) |
| * |
| * Copyright (C) 2009 Devin Heitmueller <dheitmueller@linuxtv.org> |
| * Copyright (C) 2005-2008 Auvitek International, Ltd. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * As published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA. |
| */ |
| |
| /* Developer Notes: |
| * |
| * The hardware scaler supported is unimplemented |
| * AC97 audio support is unimplemented (only i2s audio mode) |
| * |
| */ |
| |
| #include "au0828.h" |
| #include "au8522.h" |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-mc.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/v4l2-event.h> |
| #include <media/tuner.h> |
| #include "au0828-reg.h" |
| |
| static DEFINE_MUTEX(au0828_sysfs_lock); |
| |
| /* ------------------------------------------------------------------ |
| Videobuf operations |
| ------------------------------------------------------------------*/ |
| |
| static unsigned int isoc_debug; |
| module_param(isoc_debug, int, 0644); |
| MODULE_PARM_DESC(isoc_debug, "enable debug messages [isoc transfers]"); |
| |
| #define au0828_isocdbg(fmt, arg...) \ |
| do {\ |
| if (isoc_debug) { \ |
| pr_info("au0828 %s :"fmt, \ |
| __func__ , ##arg); \ |
| } \ |
| } while (0) |
| |
| static inline void i2c_gate_ctrl(struct au0828_dev *dev, int val) |
| { |
| if (dev->dvb.frontend && dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl) |
| dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl(dev->dvb.frontend, val); |
| } |
| |
| static inline void print_err_status(struct au0828_dev *dev, |
| int packet, int status) |
| { |
| char *errmsg = "Unknown"; |
| |
| switch (status) { |
| case -ENOENT: |
| errmsg = "unlinked synchronuously"; |
| break; |
| case -ECONNRESET: |
| errmsg = "unlinked asynchronuously"; |
| break; |
| case -ENOSR: |
| errmsg = "Buffer error (overrun)"; |
| break; |
| case -EPIPE: |
| errmsg = "Stalled (device not responding)"; |
| break; |
| case -EOVERFLOW: |
| errmsg = "Babble (bad cable?)"; |
| break; |
| case -EPROTO: |
| errmsg = "Bit-stuff error (bad cable?)"; |
| break; |
| case -EILSEQ: |
| errmsg = "CRC/Timeout (could be anything)"; |
| break; |
| case -ETIME: |
| errmsg = "Device does not respond"; |
| break; |
| } |
| if (packet < 0) { |
| au0828_isocdbg("URB status %d [%s].\n", status, errmsg); |
| } else { |
| au0828_isocdbg("URB packet %d, status %d [%s].\n", |
| packet, status, errmsg); |
| } |
| } |
| |
| static int check_dev(struct au0828_dev *dev) |
| { |
| if (dev->dev_state & DEV_DISCONNECTED) { |
| pr_info("v4l2 ioctl: device not present\n"); |
| return -ENODEV; |
| } |
| |
| if (dev->dev_state & DEV_MISCONFIGURED) { |
| pr_info("v4l2 ioctl: device is misconfigured; " |
| "close and open it again\n"); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| /* |
| * IRQ callback, called by URB callback |
| */ |
| static void au0828_irq_callback(struct urb *urb) |
| { |
| struct au0828_dmaqueue *dma_q = urb->context; |
| struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq); |
| unsigned long flags = 0; |
| int i; |
| |
| switch (urb->status) { |
| case 0: /* success */ |
| case -ETIMEDOUT: /* NAK */ |
| break; |
| case -ECONNRESET: /* kill */ |
| case -ENOENT: |
| case -ESHUTDOWN: |
| au0828_isocdbg("au0828_irq_callback called: status kill\n"); |
| return; |
| default: /* unknown error */ |
| au0828_isocdbg("urb completition error %d.\n", urb->status); |
| break; |
| } |
| |
| /* Copy data from URB */ |
| spin_lock_irqsave(&dev->slock, flags); |
| dev->isoc_ctl.isoc_copy(dev, urb); |
| spin_unlock_irqrestore(&dev->slock, flags); |
| |
| /* Reset urb buffers */ |
| for (i = 0; i < urb->number_of_packets; i++) { |
| urb->iso_frame_desc[i].status = 0; |
| urb->iso_frame_desc[i].actual_length = 0; |
| } |
| urb->status = 0; |
| |
| urb->status = usb_submit_urb(urb, GFP_ATOMIC); |
| if (urb->status) { |
| au0828_isocdbg("urb resubmit failed (error=%i)\n", |
| urb->status); |
| } |
| dev->stream_state = STREAM_ON; |
| } |
| |
| /* |
| * Stop and Deallocate URBs |
| */ |
| static void au0828_uninit_isoc(struct au0828_dev *dev) |
| { |
| struct urb *urb; |
| int i; |
| |
| au0828_isocdbg("au0828: called au0828_uninit_isoc\n"); |
| |
| dev->isoc_ctl.nfields = -1; |
| for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { |
| urb = dev->isoc_ctl.urb[i]; |
| if (urb) { |
| if (!irqs_disabled()) |
| usb_kill_urb(urb); |
| else |
| usb_unlink_urb(urb); |
| |
| if (dev->isoc_ctl.transfer_buffer[i]) { |
| usb_free_coherent(dev->usbdev, |
| urb->transfer_buffer_length, |
| dev->isoc_ctl.transfer_buffer[i], |
| urb->transfer_dma); |
| } |
| usb_free_urb(urb); |
| dev->isoc_ctl.urb[i] = NULL; |
| } |
| dev->isoc_ctl.transfer_buffer[i] = NULL; |
| } |
| |
| kfree(dev->isoc_ctl.urb); |
| kfree(dev->isoc_ctl.transfer_buffer); |
| |
| dev->isoc_ctl.urb = NULL; |
| dev->isoc_ctl.transfer_buffer = NULL; |
| dev->isoc_ctl.num_bufs = 0; |
| |
| dev->stream_state = STREAM_OFF; |
| } |
| |
| /* |
| * Allocate URBs and start IRQ |
| */ |
| static int au0828_init_isoc(struct au0828_dev *dev, int max_packets, |
| int num_bufs, int max_pkt_size, |
| int (*isoc_copy) (struct au0828_dev *dev, struct urb *urb)) |
| { |
| struct au0828_dmaqueue *dma_q = &dev->vidq; |
| int i; |
| int sb_size, pipe; |
| struct urb *urb; |
| int j, k; |
| int rc; |
| |
| au0828_isocdbg("au0828: called au0828_prepare_isoc\n"); |
| |
| dev->isoc_ctl.isoc_copy = isoc_copy; |
| dev->isoc_ctl.num_bufs = num_bufs; |
| |
| dev->isoc_ctl.urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL); |
| if (!dev->isoc_ctl.urb) { |
| au0828_isocdbg("cannot alloc memory for usb buffers\n"); |
| return -ENOMEM; |
| } |
| |
| dev->isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs, |
| GFP_KERNEL); |
| if (!dev->isoc_ctl.transfer_buffer) { |
| au0828_isocdbg("cannot allocate memory for usb transfer\n"); |
| kfree(dev->isoc_ctl.urb); |
| return -ENOMEM; |
| } |
| |
| dev->isoc_ctl.max_pkt_size = max_pkt_size; |
| dev->isoc_ctl.buf = NULL; |
| |
| sb_size = max_packets * dev->isoc_ctl.max_pkt_size; |
| |
| /* allocate urbs and transfer buffers */ |
| for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { |
| urb = usb_alloc_urb(max_packets, GFP_KERNEL); |
| if (!urb) { |
| au0828_isocdbg("cannot alloc isoc_ctl.urb %i\n", i); |
| au0828_uninit_isoc(dev); |
| return -ENOMEM; |
| } |
| dev->isoc_ctl.urb[i] = urb; |
| |
| dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(dev->usbdev, |
| sb_size, GFP_KERNEL, &urb->transfer_dma); |
| if (!dev->isoc_ctl.transfer_buffer[i]) { |
| printk("unable to allocate %i bytes for transfer" |
| " buffer %i%s\n", |
| sb_size, i, |
| in_interrupt() ? " while in int" : ""); |
| au0828_uninit_isoc(dev); |
| return -ENOMEM; |
| } |
| memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size); |
| |
| pipe = usb_rcvisocpipe(dev->usbdev, |
| dev->isoc_in_endpointaddr), |
| |
| usb_fill_int_urb(urb, dev->usbdev, pipe, |
| dev->isoc_ctl.transfer_buffer[i], sb_size, |
| au0828_irq_callback, dma_q, 1); |
| |
| urb->number_of_packets = max_packets; |
| urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; |
| |
| k = 0; |
| for (j = 0; j < max_packets; j++) { |
| urb->iso_frame_desc[j].offset = k; |
| urb->iso_frame_desc[j].length = |
| dev->isoc_ctl.max_pkt_size; |
| k += dev->isoc_ctl.max_pkt_size; |
| } |
| } |
| |
| /* submit urbs and enables IRQ */ |
| for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { |
| rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC); |
| if (rc) { |
| au0828_isocdbg("submit of urb %i failed (error=%i)\n", |
| i, rc); |
| au0828_uninit_isoc(dev); |
| return rc; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Announces that a buffer were filled and request the next |
| */ |
| static inline void buffer_filled(struct au0828_dev *dev, |
| struct au0828_dmaqueue *dma_q, |
| struct au0828_buffer *buf) |
| { |
| struct vb2_v4l2_buffer *vb = &buf->vb; |
| struct vb2_queue *q = vb->vb2_buf.vb2_queue; |
| |
| /* Advice that buffer was filled */ |
| au0828_isocdbg("[%p/%d] wakeup\n", buf, buf->top_field); |
| |
| if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| vb->sequence = dev->frame_count++; |
| else |
| vb->sequence = dev->vbi_frame_count++; |
| |
| vb->field = V4L2_FIELD_INTERLACED; |
| vb->vb2_buf.timestamp = ktime_get_ns(); |
| vb2_buffer_done(&vb->vb2_buf, VB2_BUF_STATE_DONE); |
| } |
| |
| /* |
| * Identify the buffer header type and properly handles |
| */ |
| static void au0828_copy_video(struct au0828_dev *dev, |
| struct au0828_dmaqueue *dma_q, |
| struct au0828_buffer *buf, |
| unsigned char *p, |
| unsigned char *outp, unsigned long len) |
| { |
| void *fieldstart, *startwrite, *startread; |
| int linesdone, currlinedone, offset, lencopy, remain; |
| int bytesperline = dev->width << 1; /* Assumes 16-bit depth @@@@ */ |
| |
| if (len == 0) |
| return; |
| |
| if (dma_q->pos + len > buf->length) |
| len = buf->length - dma_q->pos; |
| |
| startread = p; |
| remain = len; |
| |
| /* Interlaces frame */ |
| if (buf->top_field) |
| fieldstart = outp; |
| else |
| fieldstart = outp + bytesperline; |
| |
| linesdone = dma_q->pos / bytesperline; |
| currlinedone = dma_q->pos % bytesperline; |
| offset = linesdone * bytesperline * 2 + currlinedone; |
| startwrite = fieldstart + offset; |
| lencopy = bytesperline - currlinedone; |
| lencopy = lencopy > remain ? remain : lencopy; |
| |
| if ((char *)startwrite + lencopy > (char *)outp + buf->length) { |
| au0828_isocdbg("Overflow of %zi bytes past buffer end (1)\n", |
| ((char *)startwrite + lencopy) - |
| ((char *)outp + buf->length)); |
| remain = (char *)outp + buf->length - (char *)startwrite; |
| lencopy = remain; |
| } |
| if (lencopy <= 0) |
| return; |
| memcpy(startwrite, startread, lencopy); |
| |
| remain -= lencopy; |
| |
| while (remain > 0) { |
| startwrite += lencopy + bytesperline; |
| startread += lencopy; |
| if (bytesperline > remain) |
| lencopy = remain; |
| else |
| lencopy = bytesperline; |
| |
| if ((char *)startwrite + lencopy > (char *)outp + |
| buf->length) { |
| au0828_isocdbg("Overflow %zi bytes past buf end (2)\n", |
| ((char *)startwrite + lencopy) - |
| ((char *)outp + buf->length)); |
| lencopy = remain = (char *)outp + buf->length - |
| (char *)startwrite; |
| } |
| if (lencopy <= 0) |
| break; |
| |
| memcpy(startwrite, startread, lencopy); |
| |
| remain -= lencopy; |
| } |
| |
| if (offset > 1440) { |
| /* We have enough data to check for greenscreen */ |
| if (outp[0] < 0x60 && outp[1440] < 0x60) |
| dev->greenscreen_detected = 1; |
| } |
| |
| dma_q->pos += len; |
| } |
| |
| /* |
| * video-buf generic routine to get the next available buffer |
| */ |
| static inline void get_next_buf(struct au0828_dmaqueue *dma_q, |
| struct au0828_buffer **buf) |
| { |
| struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq); |
| |
| if (list_empty(&dma_q->active)) { |
| au0828_isocdbg("No active queue to serve\n"); |
| dev->isoc_ctl.buf = NULL; |
| *buf = NULL; |
| return; |
| } |
| |
| /* Get the next buffer */ |
| *buf = list_entry(dma_q->active.next, struct au0828_buffer, list); |
| /* Cleans up buffer - Useful for testing for frame/URB loss */ |
| list_del(&(*buf)->list); |
| dma_q->pos = 0; |
| (*buf)->vb_buf = (*buf)->mem; |
| dev->isoc_ctl.buf = *buf; |
| |
| return; |
| } |
| |
| static void au0828_copy_vbi(struct au0828_dev *dev, |
| struct au0828_dmaqueue *dma_q, |
| struct au0828_buffer *buf, |
| unsigned char *p, |
| unsigned char *outp, unsigned long len) |
| { |
| unsigned char *startwrite, *startread; |
| int bytesperline; |
| int i, j = 0; |
| |
| if (dev == NULL) { |
| au0828_isocdbg("dev is null\n"); |
| return; |
| } |
| |
| if (dma_q == NULL) { |
| au0828_isocdbg("dma_q is null\n"); |
| return; |
| } |
| if (buf == NULL) |
| return; |
| if (p == NULL) { |
| au0828_isocdbg("p is null\n"); |
| return; |
| } |
| if (outp == NULL) { |
| au0828_isocdbg("outp is null\n"); |
| return; |
| } |
| |
| bytesperline = dev->vbi_width; |
| |
| if (dma_q->pos + len > buf->length) |
| len = buf->length - dma_q->pos; |
| |
| startread = p; |
| startwrite = outp + (dma_q->pos / 2); |
| |
| /* Make sure the bottom field populates the second half of the frame */ |
| if (buf->top_field == 0) |
| startwrite += bytesperline * dev->vbi_height; |
| |
| for (i = 0; i < len; i += 2) |
| startwrite[j++] = startread[i+1]; |
| |
| dma_q->pos += len; |
| } |
| |
| |
| /* |
| * video-buf generic routine to get the next available VBI buffer |
| */ |
| static inline void vbi_get_next_buf(struct au0828_dmaqueue *dma_q, |
| struct au0828_buffer **buf) |
| { |
| struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vbiq); |
| |
| if (list_empty(&dma_q->active)) { |
| au0828_isocdbg("No active queue to serve\n"); |
| dev->isoc_ctl.vbi_buf = NULL; |
| *buf = NULL; |
| return; |
| } |
| |
| /* Get the next buffer */ |
| *buf = list_entry(dma_q->active.next, struct au0828_buffer, list); |
| /* Cleans up buffer - Useful for testing for frame/URB loss */ |
| list_del(&(*buf)->list); |
| dma_q->pos = 0; |
| (*buf)->vb_buf = (*buf)->mem; |
| dev->isoc_ctl.vbi_buf = *buf; |
| return; |
| } |
| |
| /* |
| * Controls the isoc copy of each urb packet |
| */ |
| static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb) |
| { |
| struct au0828_buffer *buf; |
| struct au0828_buffer *vbi_buf; |
| struct au0828_dmaqueue *dma_q = urb->context; |
| struct au0828_dmaqueue *vbi_dma_q = &dev->vbiq; |
| unsigned char *outp = NULL; |
| unsigned char *vbioutp = NULL; |
| int i, len = 0, rc = 1; |
| unsigned char *p; |
| unsigned char fbyte; |
| unsigned int vbi_field_size; |
| unsigned int remain, lencopy; |
| |
| if (!dev) |
| return 0; |
| |
| if ((dev->dev_state & DEV_DISCONNECTED) || |
| (dev->dev_state & DEV_MISCONFIGURED)) |
| return 0; |
| |
| if (urb->status < 0) { |
| print_err_status(dev, -1, urb->status); |
| if (urb->status == -ENOENT) |
| return 0; |
| } |
| |
| buf = dev->isoc_ctl.buf; |
| if (buf != NULL) |
| outp = vb2_plane_vaddr(&buf->vb.vb2_buf, 0); |
| |
| vbi_buf = dev->isoc_ctl.vbi_buf; |
| if (vbi_buf != NULL) |
| vbioutp = vb2_plane_vaddr(&vbi_buf->vb.vb2_buf, 0); |
| |
| for (i = 0; i < urb->number_of_packets; i++) { |
| int status = urb->iso_frame_desc[i].status; |
| |
| if (status < 0) { |
| print_err_status(dev, i, status); |
| if (urb->iso_frame_desc[i].status != -EPROTO) |
| continue; |
| } |
| |
| if (urb->iso_frame_desc[i].actual_length <= 0) |
| continue; |
| |
| if (urb->iso_frame_desc[i].actual_length > |
| dev->max_pkt_size) { |
| au0828_isocdbg("packet bigger than packet size"); |
| continue; |
| } |
| |
| p = urb->transfer_buffer + urb->iso_frame_desc[i].offset; |
| fbyte = p[0]; |
| len = urb->iso_frame_desc[i].actual_length - 4; |
| p += 4; |
| |
| if (fbyte & 0x80) { |
| len -= 4; |
| p += 4; |
| au0828_isocdbg("Video frame %s\n", |
| (fbyte & 0x40) ? "odd" : "even"); |
| if (fbyte & 0x40) { |
| /* VBI */ |
| if (vbi_buf != NULL) |
| buffer_filled(dev, vbi_dma_q, vbi_buf); |
| vbi_get_next_buf(vbi_dma_q, &vbi_buf); |
| if (vbi_buf == NULL) |
| vbioutp = NULL; |
| else |
| vbioutp = vb2_plane_vaddr( |
| &vbi_buf->vb.vb2_buf, 0); |
| |
| /* Video */ |
| if (buf != NULL) |
| buffer_filled(dev, dma_q, buf); |
| get_next_buf(dma_q, &buf); |
| if (buf == NULL) |
| outp = NULL; |
| else |
| outp = vb2_plane_vaddr( |
| &buf->vb.vb2_buf, 0); |
| |
| /* As long as isoc traffic is arriving, keep |
| resetting the timer */ |
| if (dev->vid_timeout_running) |
| mod_timer(&dev->vid_timeout, |
| jiffies + (HZ / 10)); |
| if (dev->vbi_timeout_running) |
| mod_timer(&dev->vbi_timeout, |
| jiffies + (HZ / 10)); |
| } |
| |
| if (buf != NULL) { |
| if (fbyte & 0x40) |
| buf->top_field = 1; |
| else |
| buf->top_field = 0; |
| } |
| |
| if (vbi_buf != NULL) { |
| if (fbyte & 0x40) |
| vbi_buf->top_field = 1; |
| else |
| vbi_buf->top_field = 0; |
| } |
| |
| dev->vbi_read = 0; |
| vbi_dma_q->pos = 0; |
| dma_q->pos = 0; |
| } |
| |
| vbi_field_size = dev->vbi_width * dev->vbi_height * 2; |
| if (dev->vbi_read < vbi_field_size) { |
| remain = vbi_field_size - dev->vbi_read; |
| if (len < remain) |
| lencopy = len; |
| else |
| lencopy = remain; |
| |
| if (vbi_buf != NULL) |
| au0828_copy_vbi(dev, vbi_dma_q, vbi_buf, p, |
| vbioutp, len); |
| |
| len -= lencopy; |
| p += lencopy; |
| dev->vbi_read += lencopy; |
| } |
| |
| if (dev->vbi_read >= vbi_field_size && buf != NULL) |
| au0828_copy_video(dev, dma_q, buf, p, outp, len); |
| } |
| return rc; |
| } |
| |
| void au0828_usb_v4l2_media_release(struct au0828_dev *dev) |
| { |
| #ifdef CONFIG_MEDIA_CONTROLLER |
| int i; |
| |
| for (i = 0; i < AU0828_MAX_INPUT; i++) { |
| if (AUVI_INPUT(i).type == AU0828_VMUX_UNDEFINED) |
| return; |
| media_device_unregister_entity(&dev->input_ent[i]); |
| } |
| #endif |
| } |
| |
| static void au0828_usb_v4l2_release(struct v4l2_device *v4l2_dev) |
| { |
| struct au0828_dev *dev = |
| container_of(v4l2_dev, struct au0828_dev, v4l2_dev); |
| |
| v4l2_ctrl_handler_free(&dev->v4l2_ctrl_hdl); |
| v4l2_device_unregister(&dev->v4l2_dev); |
| au0828_usb_v4l2_media_release(dev); |
| au0828_usb_release(dev); |
| } |
| |
| int au0828_v4l2_device_register(struct usb_interface *interface, |
| struct au0828_dev *dev) |
| { |
| int retval; |
| |
| if (AUVI_INPUT(0).type == AU0828_VMUX_UNDEFINED) |
| return 0; |
| |
| /* Create the v4l2_device */ |
| #ifdef CONFIG_MEDIA_CONTROLLER |
| dev->v4l2_dev.mdev = dev->media_dev; |
| #endif |
| retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev); |
| if (retval) { |
| pr_err("%s() v4l2_device_register failed\n", |
| __func__); |
| mutex_unlock(&dev->lock); |
| kfree(dev); |
| return retval; |
| } |
| |
| dev->v4l2_dev.release = au0828_usb_v4l2_release; |
| |
| /* This control handler will inherit the controls from au8522 */ |
| retval = v4l2_ctrl_handler_init(&dev->v4l2_ctrl_hdl, 4); |
| if (retval) { |
| pr_err("%s() v4l2_ctrl_handler_init failed\n", |
| __func__); |
| mutex_unlock(&dev->lock); |
| kfree(dev); |
| return retval; |
| } |
| dev->v4l2_dev.ctrl_handler = &dev->v4l2_ctrl_hdl; |
| |
| return 0; |
| } |
| |
| static int queue_setup(struct vb2_queue *vq, |
| unsigned int *nbuffers, unsigned int *nplanes, |
| unsigned int sizes[], void *alloc_ctxs[]) |
| { |
| struct au0828_dev *dev = vb2_get_drv_priv(vq); |
| unsigned long size = dev->height * dev->bytesperline; |
| |
| if (*nplanes) |
| return sizes[0] < size ? -EINVAL : 0; |
| *nplanes = 1; |
| sizes[0] = size; |
| return 0; |
| } |
| |
| static int |
| buffer_prepare(struct vb2_buffer *vb) |
| { |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| struct au0828_buffer *buf = container_of(vbuf, |
| struct au0828_buffer, vb); |
| struct au0828_dev *dev = vb2_get_drv_priv(vb->vb2_queue); |
| |
| buf->length = dev->height * dev->bytesperline; |
| |
| if (vb2_plane_size(vb, 0) < buf->length) { |
| pr_err("%s data will not fit into plane (%lu < %lu)\n", |
| __func__, vb2_plane_size(vb, 0), buf->length); |
| return -EINVAL; |
| } |
| vb2_set_plane_payload(&buf->vb.vb2_buf, 0, buf->length); |
| return 0; |
| } |
| |
| static void |
| buffer_queue(struct vb2_buffer *vb) |
| { |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| struct au0828_buffer *buf = container_of(vbuf, |
| struct au0828_buffer, |
| vb); |
| struct au0828_dev *dev = vb2_get_drv_priv(vb->vb2_queue); |
| struct au0828_dmaqueue *vidq = &dev->vidq; |
| unsigned long flags = 0; |
| |
| buf->mem = vb2_plane_vaddr(vb, 0); |
| buf->length = vb2_plane_size(vb, 0); |
| |
| spin_lock_irqsave(&dev->slock, flags); |
| list_add_tail(&buf->list, &vidq->active); |
| spin_unlock_irqrestore(&dev->slock, flags); |
| } |
| |
| static int au0828_i2s_init(struct au0828_dev *dev) |
| { |
| /* Enable i2s mode */ |
| au0828_writereg(dev, AU0828_AUDIOCTRL_50C, 0x01); |
| return 0; |
| } |
| |
| /* |
| * Auvitek au0828 analog stream enable |
| */ |
| static int au0828_analog_stream_enable(struct au0828_dev *d) |
| { |
| struct usb_interface *iface; |
| int ret, h, w; |
| |
| dprintk(1, "au0828_analog_stream_enable called\n"); |
| |
| iface = usb_ifnum_to_if(d->usbdev, 0); |
| if (iface && iface->cur_altsetting->desc.bAlternateSetting != 5) { |
| dprintk(1, "Changing intf#0 to alt 5\n"); |
| /* set au0828 interface0 to AS5 here again */ |
| ret = usb_set_interface(d->usbdev, 0, 5); |
| if (ret < 0) { |
| pr_info("Au0828 can't set alt setting to 5!\n"); |
| return -EBUSY; |
| } |
| } |
| |
| h = d->height / 2 + 2; |
| w = d->width * 2; |
| |
| au0828_writereg(d, AU0828_SENSORCTRL_VBI_103, 0x00); |
| au0828_writereg(d, 0x106, 0x00); |
| /* set x position */ |
| au0828_writereg(d, 0x110, 0x00); |
| au0828_writereg(d, 0x111, 0x00); |
| au0828_writereg(d, 0x114, w & 0xff); |
| au0828_writereg(d, 0x115, w >> 8); |
| /* set y position */ |
| au0828_writereg(d, 0x112, 0x00); |
| au0828_writereg(d, 0x113, 0x00); |
| au0828_writereg(d, 0x116, h & 0xff); |
| au0828_writereg(d, 0x117, h >> 8); |
| au0828_writereg(d, AU0828_SENSORCTRL_100, 0xb3); |
| |
| return 0; |
| } |
| |
| static int au0828_analog_stream_disable(struct au0828_dev *d) |
| { |
| dprintk(1, "au0828_analog_stream_disable called\n"); |
| au0828_writereg(d, AU0828_SENSORCTRL_100, 0x0); |
| return 0; |
| } |
| |
| static void au0828_analog_stream_reset(struct au0828_dev *dev) |
| { |
| dprintk(1, "au0828_analog_stream_reset called\n"); |
| au0828_writereg(dev, AU0828_SENSORCTRL_100, 0x0); |
| mdelay(30); |
| au0828_writereg(dev, AU0828_SENSORCTRL_100, 0xb3); |
| } |
| |
| /* |
| * Some operations needs to stop current streaming |
| */ |
| static int au0828_stream_interrupt(struct au0828_dev *dev) |
| { |
| int ret = 0; |
| |
| dev->stream_state = STREAM_INTERRUPT; |
| if (dev->dev_state == DEV_DISCONNECTED) |
| return -ENODEV; |
| else if (ret) { |
| dev->dev_state = DEV_MISCONFIGURED; |
| dprintk(1, "%s device is misconfigured!\n", __func__); |
| return ret; |
| } |
| return 0; |
| } |
| |
| int au0828_start_analog_streaming(struct vb2_queue *vq, unsigned int count) |
| { |
| struct au0828_dev *dev = vb2_get_drv_priv(vq); |
| int rc = 0; |
| |
| dprintk(1, "au0828_start_analog_streaming called %d\n", |
| dev->streaming_users); |
| |
| if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| dev->frame_count = 0; |
| else |
| dev->vbi_frame_count = 0; |
| |
| if (dev->streaming_users == 0) { |
| /* If we were doing ac97 instead of i2s, it would go here...*/ |
| au0828_i2s_init(dev); |
| rc = au0828_init_isoc(dev, AU0828_ISO_PACKETS_PER_URB, |
| AU0828_MAX_ISO_BUFS, dev->max_pkt_size, |
| au0828_isoc_copy); |
| if (rc < 0) { |
| pr_info("au0828_init_isoc failed\n"); |
| return rc; |
| } |
| |
| if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { |
| v4l2_device_call_all(&dev->v4l2_dev, 0, video, |
| s_stream, 1); |
| dev->vid_timeout_running = 1; |
| mod_timer(&dev->vid_timeout, jiffies + (HZ / 10)); |
| } else if (vq->type == V4L2_BUF_TYPE_VBI_CAPTURE) { |
| dev->vbi_timeout_running = 1; |
| mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10)); |
| } |
| } |
| dev->streaming_users++; |
| return rc; |
| } |
| |
| static void au0828_stop_streaming(struct vb2_queue *vq) |
| { |
| struct au0828_dev *dev = vb2_get_drv_priv(vq); |
| struct au0828_dmaqueue *vidq = &dev->vidq; |
| unsigned long flags = 0; |
| |
| dprintk(1, "au0828_stop_streaming called %d\n", dev->streaming_users); |
| |
| if (dev->streaming_users-- == 1) |
| au0828_uninit_isoc(dev); |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0); |
| dev->vid_timeout_running = 0; |
| del_timer_sync(&dev->vid_timeout); |
| |
| spin_lock_irqsave(&dev->slock, flags); |
| if (dev->isoc_ctl.buf != NULL) { |
| vb2_buffer_done(&dev->isoc_ctl.buf->vb.vb2_buf, |
| VB2_BUF_STATE_ERROR); |
| dev->isoc_ctl.buf = NULL; |
| } |
| while (!list_empty(&vidq->active)) { |
| struct au0828_buffer *buf; |
| |
| buf = list_entry(vidq->active.next, struct au0828_buffer, list); |
| vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); |
| list_del(&buf->list); |
| } |
| spin_unlock_irqrestore(&dev->slock, flags); |
| } |
| |
| void au0828_stop_vbi_streaming(struct vb2_queue *vq) |
| { |
| struct au0828_dev *dev = vb2_get_drv_priv(vq); |
| struct au0828_dmaqueue *vbiq = &dev->vbiq; |
| unsigned long flags = 0; |
| |
| dprintk(1, "au0828_stop_vbi_streaming called %d\n", |
| dev->streaming_users); |
| |
| if (dev->streaming_users-- == 1) |
| au0828_uninit_isoc(dev); |
| |
| spin_lock_irqsave(&dev->slock, flags); |
| if (dev->isoc_ctl.vbi_buf != NULL) { |
| vb2_buffer_done(&dev->isoc_ctl.vbi_buf->vb.vb2_buf, |
| VB2_BUF_STATE_ERROR); |
| dev->isoc_ctl.vbi_buf = NULL; |
| } |
| while (!list_empty(&vbiq->active)) { |
| struct au0828_buffer *buf; |
| |
| buf = list_entry(vbiq->active.next, struct au0828_buffer, list); |
| list_del(&buf->list); |
| vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); |
| } |
| spin_unlock_irqrestore(&dev->slock, flags); |
| |
| dev->vbi_timeout_running = 0; |
| del_timer_sync(&dev->vbi_timeout); |
| } |
| |
| static struct vb2_ops au0828_video_qops = { |
| .queue_setup = queue_setup, |
| .buf_prepare = buffer_prepare, |
| .buf_queue = buffer_queue, |
| .start_streaming = au0828_start_analog_streaming, |
| .stop_streaming = au0828_stop_streaming, |
| .wait_prepare = vb2_ops_wait_prepare, |
| .wait_finish = vb2_ops_wait_finish, |
| }; |
| |
| /* ------------------------------------------------------------------ |
| V4L2 interface |
| ------------------------------------------------------------------*/ |
| /* |
| * au0828_analog_unregister |
| * unregister v4l2 devices |
| */ |
| int au0828_analog_unregister(struct au0828_dev *dev) |
| { |
| dprintk(1, "au0828_analog_unregister called\n"); |
| |
| /* No analog TV */ |
| if (AUVI_INPUT(0).type == AU0828_VMUX_UNDEFINED) |
| return 0; |
| |
| mutex_lock(&au0828_sysfs_lock); |
| video_unregister_device(&dev->vdev); |
| video_unregister_device(&dev->vbi_dev); |
| mutex_unlock(&au0828_sysfs_lock); |
| |
| v4l2_device_disconnect(&dev->v4l2_dev); |
| v4l2_device_put(&dev->v4l2_dev); |
| |
| return 1; |
| } |
| |
| /* This function ensures that video frames continue to be delivered even if |
| the ITU-656 input isn't receiving any data (thereby preventing applications |
| such as tvtime from hanging) */ |
| static void au0828_vid_buffer_timeout(unsigned long data) |
| { |
| struct au0828_dev *dev = (struct au0828_dev *) data; |
| struct au0828_dmaqueue *dma_q = &dev->vidq; |
| struct au0828_buffer *buf; |
| unsigned char *vid_data; |
| unsigned long flags = 0; |
| |
| spin_lock_irqsave(&dev->slock, flags); |
| |
| buf = dev->isoc_ctl.buf; |
| if (buf != NULL) { |
| vid_data = vb2_plane_vaddr(&buf->vb.vb2_buf, 0); |
| memset(vid_data, 0x00, buf->length); /* Blank green frame */ |
| buffer_filled(dev, dma_q, buf); |
| } |
| get_next_buf(dma_q, &buf); |
| |
| if (dev->vid_timeout_running == 1) |
| mod_timer(&dev->vid_timeout, jiffies + (HZ / 10)); |
| |
| spin_unlock_irqrestore(&dev->slock, flags); |
| } |
| |
| static void au0828_vbi_buffer_timeout(unsigned long data) |
| { |
| struct au0828_dev *dev = (struct au0828_dev *) data; |
| struct au0828_dmaqueue *dma_q = &dev->vbiq; |
| struct au0828_buffer *buf; |
| unsigned char *vbi_data; |
| unsigned long flags = 0; |
| |
| spin_lock_irqsave(&dev->slock, flags); |
| |
| buf = dev->isoc_ctl.vbi_buf; |
| if (buf != NULL) { |
| vbi_data = vb2_plane_vaddr(&buf->vb.vb2_buf, 0); |
| memset(vbi_data, 0x00, buf->length); |
| buffer_filled(dev, dma_q, buf); |
| } |
| vbi_get_next_buf(dma_q, &buf); |
| |
| if (dev->vbi_timeout_running == 1) |
| mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10)); |
| spin_unlock_irqrestore(&dev->slock, flags); |
| } |
| |
| static int au0828_v4l2_open(struct file *filp) |
| { |
| struct au0828_dev *dev = video_drvdata(filp); |
| int ret; |
| |
| dprintk(1, |
| "%s called std_set %d dev_state %d stream users %d users %d\n", |
| __func__, dev->std_set_in_tuner_core, dev->dev_state, |
| dev->streaming_users, dev->users); |
| |
| if (mutex_lock_interruptible(&dev->lock)) |
| return -ERESTARTSYS; |
| |
| ret = v4l2_fh_open(filp); |
| if (ret) { |
| au0828_isocdbg("%s: v4l2_fh_open() returned error %d\n", |
| __func__, ret); |
| mutex_unlock(&dev->lock); |
| return ret; |
| } |
| |
| if (dev->users == 0) { |
| au0828_analog_stream_enable(dev); |
| au0828_analog_stream_reset(dev); |
| dev->stream_state = STREAM_OFF; |
| dev->dev_state |= DEV_INITIALIZED; |
| } |
| dev->users++; |
| mutex_unlock(&dev->lock); |
| return ret; |
| } |
| |
| static int au0828_v4l2_close(struct file *filp) |
| { |
| int ret; |
| struct au0828_dev *dev = video_drvdata(filp); |
| struct video_device *vdev = video_devdata(filp); |
| |
| dprintk(1, |
| "%s called std_set %d dev_state %d stream users %d users %d\n", |
| __func__, dev->std_set_in_tuner_core, dev->dev_state, |
| dev->streaming_users, dev->users); |
| |
| mutex_lock(&dev->lock); |
| if (vdev->vfl_type == VFL_TYPE_GRABBER && dev->vid_timeout_running) { |
| /* Cancel timeout thread in case they didn't call streamoff */ |
| dev->vid_timeout_running = 0; |
| del_timer_sync(&dev->vid_timeout); |
| } else if (vdev->vfl_type == VFL_TYPE_VBI && |
| dev->vbi_timeout_running) { |
| /* Cancel timeout thread in case they didn't call streamoff */ |
| dev->vbi_timeout_running = 0; |
| del_timer_sync(&dev->vbi_timeout); |
| } |
| |
| if (dev->dev_state == DEV_DISCONNECTED) |
| goto end; |
| |
| if (dev->users == 1) { |
| /* |
| * Avoid putting tuner in sleep if DVB or ALSA are |
| * streaming. |
| * |
| * On most USB devices like au0828 the tuner can |
| * be safely put in sleep stare here if ALSA isn't |
| * streaming. Exceptions are some very old USB tuner |
| * models such as em28xx-based WinTV USB2 which have |
| * a separate audio output jack. The devices that have |
| * a separate audio output jack have analog tuners, |
| * like Philips FM1236. Those devices are always on, |
| * so the s_power callback are silently ignored. |
| * So, the current logic here does the following: |
| * Disable (put tuner to sleep) when |
| * - ALSA and DVB aren't not streaming; |
| * - the last V4L2 file handler is closed. |
| * |
| * FIXME: |
| * |
| * Additionally, this logic could be improved to |
| * disable the media source if the above conditions |
| * are met and if the device: |
| * - doesn't have a separate audio out plug (or |
| * - doesn't use a silicon tuner like xc2028/3028/4000/5000). |
| * |
| * Once this additional logic is in place, a callback |
| * is needed to enable the media source and power on |
| * the tuner, for radio to work. |
| */ |
| ret = v4l_enable_media_source(vdev); |
| if (ret == 0) |
| v4l2_device_call_all(&dev->v4l2_dev, 0, core, |
| s_power, 0); |
| dev->std_set_in_tuner_core = 0; |
| |
| /* When close the device, set the usb intf0 into alt0 to free |
| USB bandwidth */ |
| ret = usb_set_interface(dev->usbdev, 0, 0); |
| if (ret < 0) |
| pr_info("Au0828 can't set alternate to 0!\n"); |
| } |
| end: |
| _vb2_fop_release(filp, NULL); |
| dev->users--; |
| mutex_unlock(&dev->lock); |
| return 0; |
| } |
| |
| /* Must be called with dev->lock held */ |
| static void au0828_init_tuner(struct au0828_dev *dev) |
| { |
| struct v4l2_frequency f = { |
| .frequency = dev->ctrl_freq, |
| .type = V4L2_TUNER_ANALOG_TV, |
| }; |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| if (dev->std_set_in_tuner_core) |
| return; |
| dev->std_set_in_tuner_core = 1; |
| i2c_gate_ctrl(dev, 1); |
| /* If we've never sent the standard in tuner core, do so now. |
| We don't do this at device probe because we don't want to |
| incur the cost of a firmware load */ |
| v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->std); |
| v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f); |
| i2c_gate_ctrl(dev, 0); |
| } |
| |
| static int au0828_set_format(struct au0828_dev *dev, unsigned int cmd, |
| struct v4l2_format *format) |
| { |
| int ret; |
| int width = format->fmt.pix.width; |
| int height = format->fmt.pix.height; |
| |
| /* If they are demanding a format other than the one we support, |
| bail out (tvtime asks for UYVY and then retries with YUYV) */ |
| if (format->fmt.pix.pixelformat != V4L2_PIX_FMT_UYVY) |
| return -EINVAL; |
| |
| /* format->fmt.pix.width only support 720 and height 480 */ |
| if (width != 720) |
| width = 720; |
| if (height != 480) |
| height = 480; |
| |
| format->fmt.pix.width = width; |
| format->fmt.pix.height = height; |
| format->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY; |
| format->fmt.pix.bytesperline = width * 2; |
| format->fmt.pix.sizeimage = width * height * 2; |
| format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; |
| format->fmt.pix.field = V4L2_FIELD_INTERLACED; |
| format->fmt.pix.priv = 0; |
| |
| if (cmd == VIDIOC_TRY_FMT) |
| return 0; |
| |
| /* maybe set new image format, driver current only support 720*480 */ |
| dev->width = width; |
| dev->height = height; |
| dev->frame_size = width * height * 2; |
| dev->field_size = width * height; |
| dev->bytesperline = width * 2; |
| |
| if (dev->stream_state == STREAM_ON) { |
| dprintk(1, "VIDIOC_SET_FMT: interrupting stream!\n"); |
| ret = au0828_stream_interrupt(dev); |
| if (ret != 0) { |
| dprintk(1, "error interrupting video stream!\n"); |
| return ret; |
| } |
| } |
| |
| au0828_analog_stream_enable(dev); |
| |
| return 0; |
| } |
| |
| static int vidioc_querycap(struct file *file, void *priv, |
| struct v4l2_capability *cap) |
| { |
| struct video_device *vdev = video_devdata(file); |
| struct au0828_dev *dev = video_drvdata(file); |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| strlcpy(cap->driver, "au0828", sizeof(cap->driver)); |
| strlcpy(cap->card, dev->board.name, sizeof(cap->card)); |
| usb_make_path(dev->usbdev, cap->bus_info, sizeof(cap->bus_info)); |
| |
| /* set the device capabilities */ |
| cap->device_caps = V4L2_CAP_AUDIO | |
| V4L2_CAP_READWRITE | |
| V4L2_CAP_STREAMING | |
| V4L2_CAP_TUNER; |
| if (vdev->vfl_type == VFL_TYPE_GRABBER) |
| cap->device_caps |= V4L2_CAP_VIDEO_CAPTURE; |
| else |
| cap->device_caps |= V4L2_CAP_VBI_CAPTURE; |
| cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS | |
| V4L2_CAP_VBI_CAPTURE | V4L2_CAP_VIDEO_CAPTURE; |
| return 0; |
| } |
| |
| static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_fmtdesc *f) |
| { |
| if (f->index) |
| return -EINVAL; |
| |
| dprintk(1, "%s called\n", __func__); |
| |
| f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| strcpy(f->description, "Packed YUV2"); |
| |
| f->flags = 0; |
| f->pixelformat = V4L2_PIX_FMT_UYVY; |
| |
| return 0; |
| } |
| |
| static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| f->fmt.pix.width = dev->width; |
| f->fmt.pix.height = dev->height; |
| f->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY; |
| f->fmt.pix.bytesperline = dev->bytesperline; |
| f->fmt.pix.sizeimage = dev->frame_size; |
| f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; /* NTSC/PAL */ |
| f->fmt.pix.field = V4L2_FIELD_INTERLACED; |
| f->fmt.pix.priv = 0; |
| return 0; |
| } |
| |
| static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| return au0828_set_format(dev, VIDIOC_TRY_FMT, f); |
| } |
| |
| static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| int rc; |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| rc = check_dev(dev); |
| if (rc < 0) |
| return rc; |
| |
| if (vb2_is_busy(&dev->vb_vidq)) { |
| pr_info("%s queue busy\n", __func__); |
| rc = -EBUSY; |
| goto out; |
| } |
| |
| rc = au0828_set_format(dev, VIDIOC_S_FMT, f); |
| out: |
| return rc; |
| } |
| |
| static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| if (norm == dev->std) |
| return 0; |
| |
| if (dev->streaming_users > 0) |
| return -EBUSY; |
| |
| dev->std = norm; |
| |
| au0828_init_tuner(dev); |
| |
| i2c_gate_ctrl(dev, 1); |
| |
| /* |
| * FIXME: when we support something other than 60Hz standards, |
| * we are going to have to make the au0828 bridge adjust the size |
| * of its capture buffer, which is currently hardcoded at 720x480 |
| */ |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, norm); |
| |
| i2c_gate_ctrl(dev, 0); |
| |
| return 0; |
| } |
| |
| static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *norm) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| *norm = dev->std; |
| return 0; |
| } |
| |
| static int vidioc_enum_input(struct file *file, void *priv, |
| struct v4l2_input *input) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| unsigned int tmp; |
| |
| static const char *inames[] = { |
| [AU0828_VMUX_UNDEFINED] = "Undefined", |
| [AU0828_VMUX_COMPOSITE] = "Composite", |
| [AU0828_VMUX_SVIDEO] = "S-Video", |
| [AU0828_VMUX_CABLE] = "Cable TV", |
| [AU0828_VMUX_TELEVISION] = "Television", |
| [AU0828_VMUX_DVB] = "DVB", |
| }; |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| tmp = input->index; |
| |
| if (tmp >= AU0828_MAX_INPUT) |
| return -EINVAL; |
| if (AUVI_INPUT(tmp).type == 0) |
| return -EINVAL; |
| |
| input->index = tmp; |
| strcpy(input->name, inames[AUVI_INPUT(tmp).type]); |
| if ((AUVI_INPUT(tmp).type == AU0828_VMUX_TELEVISION) || |
| (AUVI_INPUT(tmp).type == AU0828_VMUX_CABLE)) { |
| input->type |= V4L2_INPUT_TYPE_TUNER; |
| input->audioset = 1; |
| } else { |
| input->type |= V4L2_INPUT_TYPE_CAMERA; |
| input->audioset = 2; |
| } |
| |
| input->std = dev->vdev.tvnorms; |
| |
| return 0; |
| } |
| |
| static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| *i = dev->ctrl_input; |
| return 0; |
| } |
| |
| static void au0828_s_input(struct au0828_dev *dev, int index) |
| { |
| int i; |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| switch (AUVI_INPUT(index).type) { |
| case AU0828_VMUX_SVIDEO: |
| dev->input_type = AU0828_VMUX_SVIDEO; |
| dev->ctrl_ainput = 1; |
| break; |
| case AU0828_VMUX_COMPOSITE: |
| dev->input_type = AU0828_VMUX_COMPOSITE; |
| dev->ctrl_ainput = 1; |
| break; |
| case AU0828_VMUX_TELEVISION: |
| dev->input_type = AU0828_VMUX_TELEVISION; |
| dev->ctrl_ainput = 0; |
| break; |
| default: |
| dprintk(1, "unknown input type set [%d]\n", |
| AUVI_INPUT(index).type); |
| return; |
| } |
| |
| dev->ctrl_input = index; |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing, |
| AUVI_INPUT(index).vmux, 0, 0); |
| |
| for (i = 0; i < AU0828_MAX_INPUT; i++) { |
| int enable = 0; |
| if (AUVI_INPUT(i).audio_setup == NULL) |
| continue; |
| |
| if (i == index) |
| enable = 1; |
| else |
| enable = 0; |
| if (enable) { |
| (AUVI_INPUT(i).audio_setup)(dev, enable); |
| } else { |
| /* Make sure we leave it turned on if some |
| other input is routed to this callback */ |
| if ((AUVI_INPUT(i).audio_setup) != |
| ((AUVI_INPUT(index).audio_setup))) { |
| (AUVI_INPUT(i).audio_setup)(dev, enable); |
| } |
| } |
| } |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, audio, s_routing, |
| AUVI_INPUT(index).amux, 0, 0); |
| } |
| |
| static int vidioc_s_input(struct file *file, void *priv, unsigned int index) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| struct video_device *vfd = video_devdata(file); |
| |
| dprintk(1, "VIDIOC_S_INPUT in function %s, input=%d\n", __func__, |
| index); |
| if (index >= AU0828_MAX_INPUT) |
| return -EINVAL; |
| if (AUVI_INPUT(index).type == 0) |
| return -EINVAL; |
| |
| if (dev->ctrl_input == index) |
| return 0; |
| |
| au0828_s_input(dev, index); |
| |
| /* |
| * Input has been changed. Disable the media source |
| * associated with the old input and enable source |
| * for the newly set input |
| */ |
| v4l_disable_media_source(vfd); |
| return v4l_enable_media_source(vfd); |
| } |
| |
| static int vidioc_enumaudio(struct file *file, void *priv, struct v4l2_audio *a) |
| { |
| if (a->index > 1) |
| return -EINVAL; |
| |
| dprintk(1, "%s called\n", __func__); |
| |
| if (a->index == 0) |
| strcpy(a->name, "Television"); |
| else |
| strcpy(a->name, "Line in"); |
| |
| a->capability = V4L2_AUDCAP_STEREO; |
| return 0; |
| } |
| |
| static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| a->index = dev->ctrl_ainput; |
| if (a->index == 0) |
| strcpy(a->name, "Television"); |
| else |
| strcpy(a->name, "Line in"); |
| |
| a->capability = V4L2_AUDCAP_STEREO; |
| return 0; |
| } |
| |
| static int vidioc_s_audio(struct file *file, void *priv, const struct v4l2_audio *a) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| |
| if (a->index != dev->ctrl_ainput) |
| return -EINVAL; |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| return 0; |
| } |
| |
| static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| struct video_device *vfd = video_devdata(file); |
| int ret; |
| |
| if (t->index != 0) |
| return -EINVAL; |
| |
| ret = v4l_enable_media_source(vfd); |
| if (ret) |
| return ret; |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| strcpy(t->name, "Auvitek tuner"); |
| |
| au0828_init_tuner(dev); |
| i2c_gate_ctrl(dev, 1); |
| v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t); |
| i2c_gate_ctrl(dev, 0); |
| return 0; |
| } |
| |
| static int vidioc_s_tuner(struct file *file, void *priv, |
| const struct v4l2_tuner *t) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| |
| if (t->index != 0) |
| return -EINVAL; |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| au0828_init_tuner(dev); |
| i2c_gate_ctrl(dev, 1); |
| v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t); |
| i2c_gate_ctrl(dev, 0); |
| |
| dprintk(1, "VIDIOC_S_TUNER: signal = %x, afc = %x\n", t->signal, |
| t->afc); |
| |
| return 0; |
| |
| } |
| |
| static int vidioc_g_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *freq) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| |
| if (freq->tuner != 0) |
| return -EINVAL; |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| freq->frequency = dev->ctrl_freq; |
| return 0; |
| } |
| |
| static int vidioc_s_frequency(struct file *file, void *priv, |
| const struct v4l2_frequency *freq) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| struct v4l2_frequency new_freq = *freq; |
| |
| if (freq->tuner != 0) |
| return -EINVAL; |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| au0828_init_tuner(dev); |
| i2c_gate_ctrl(dev, 1); |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, freq); |
| /* Get the actual set (and possibly clamped) frequency */ |
| v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_frequency, &new_freq); |
| dev->ctrl_freq = new_freq.frequency; |
| |
| i2c_gate_ctrl(dev, 0); |
| |
| au0828_analog_stream_reset(dev); |
| |
| return 0; |
| } |
| |
| |
| /* RAW VBI ioctls */ |
| |
| static int vidioc_g_fmt_vbi_cap(struct file *file, void *priv, |
| struct v4l2_format *format) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| format->fmt.vbi.samples_per_line = dev->vbi_width; |
| format->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; |
| format->fmt.vbi.offset = 0; |
| format->fmt.vbi.flags = 0; |
| format->fmt.vbi.sampling_rate = 6750000 * 4 / 2; |
| |
| format->fmt.vbi.count[0] = dev->vbi_height; |
| format->fmt.vbi.count[1] = dev->vbi_height; |
| format->fmt.vbi.start[0] = 21; |
| format->fmt.vbi.start[1] = 284; |
| memset(format->fmt.vbi.reserved, 0, sizeof(format->fmt.vbi.reserved)); |
| |
| return 0; |
| } |
| |
| static int vidioc_cropcap(struct file *file, void *priv, |
| struct v4l2_cropcap *cc) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| |
| if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| return -EINVAL; |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| cc->bounds.left = 0; |
| cc->bounds.top = 0; |
| cc->bounds.width = dev->width; |
| cc->bounds.height = dev->height; |
| |
| cc->defrect = cc->bounds; |
| |
| cc->pixelaspect.numerator = 54; |
| cc->pixelaspect.denominator = 59; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static int vidioc_g_register(struct file *file, void *priv, |
| struct v4l2_dbg_register *reg) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| reg->val = au0828_read(dev, reg->reg); |
| reg->size = 1; |
| return 0; |
| } |
| |
| static int vidioc_s_register(struct file *file, void *priv, |
| const struct v4l2_dbg_register *reg) |
| { |
| struct au0828_dev *dev = video_drvdata(file); |
| |
| dprintk(1, "%s called std_set %d dev_state %d\n", __func__, |
| dev->std_set_in_tuner_core, dev->dev_state); |
| |
| return au0828_writereg(dev, reg->reg, reg->val); |
| } |
| #endif |
| |
| static int vidioc_log_status(struct file *file, void *fh) |
| { |
| struct video_device *vdev = video_devdata(file); |
| |
| dprintk(1, "%s called\n", __func__); |
| |
| v4l2_ctrl_log_status(file, fh); |
| v4l2_device_call_all(vdev->v4l2_dev, 0, core, log_status); |
| return 0; |
| } |
| |
| void au0828_v4l2_suspend(struct au0828_dev *dev) |
| { |
| struct urb *urb; |
| int i; |
| |
| pr_info("stopping V4L2\n"); |
| |
| if (dev->stream_state == STREAM_ON) { |
| pr_info("stopping V4L2 active URBs\n"); |
| au0828_analog_stream_disable(dev); |
| /* stop urbs */ |
| for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { |
| urb = dev->isoc_ctl.urb[i]; |
| if (urb) { |
| if (!irqs_disabled()) |
| usb_kill_urb(urb); |
| else |
| usb_unlink_urb(urb); |
| } |
| } |
| } |
| |
| if (dev->vid_timeout_running) |
| del_timer_sync(&dev->vid_timeout); |
| if (dev->vbi_timeout_running) |
| del_timer_sync(&dev->vbi_timeout); |
| } |
| |
| void au0828_v4l2_resume(struct au0828_dev *dev) |
| { |
| int i, rc; |
| |
| pr_info("restarting V4L2\n"); |
| |
| if (dev->stream_state == STREAM_ON) { |
| au0828_stream_interrupt(dev); |
| au0828_init_tuner(dev); |
| } |
| |
| if (dev->vid_timeout_running) |
| mod_timer(&dev->vid_timeout, jiffies + (HZ / 10)); |
| if (dev->vbi_timeout_running) |
| mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10)); |
| |
| /* If we were doing ac97 instead of i2s, it would go here...*/ |
| au0828_i2s_init(dev); |
| |
| au0828_analog_stream_enable(dev); |
| |
| if (!(dev->stream_state == STREAM_ON)) { |
| au0828_analog_stream_reset(dev); |
| /* submit urbs */ |
| for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { |
| rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC); |
| if (rc) { |
| au0828_isocdbg("submit of urb %i failed (error=%i)\n", |
| i, rc); |
| au0828_uninit_isoc(dev); |
| } |
| } |
| } |
| } |
| |
| static struct v4l2_file_operations au0828_v4l_fops = { |
| .owner = THIS_MODULE, |
| .open = au0828_v4l2_open, |
| .release = au0828_v4l2_close, |
| .read = vb2_fop_read, |
| .poll = vb2_fop_poll, |
| .mmap = vb2_fop_mmap, |
| .unlocked_ioctl = video_ioctl2, |
| }; |
| |
| static const struct v4l2_ioctl_ops video_ioctl_ops = { |
| .vidioc_querycap = vidioc_querycap, |
| .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, |
| .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, |
| .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, |
| .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, |
| .vidioc_g_fmt_vbi_cap = vidioc_g_fmt_vbi_cap, |
| .vidioc_try_fmt_vbi_cap = vidioc_g_fmt_vbi_cap, |
| .vidioc_s_fmt_vbi_cap = vidioc_g_fmt_vbi_cap, |
| .vidioc_enumaudio = vidioc_enumaudio, |
| .vidioc_g_audio = vidioc_g_audio, |
| .vidioc_s_audio = vidioc_s_audio, |
| .vidioc_cropcap = vidioc_cropcap, |
| |
| .vidioc_reqbufs = vb2_ioctl_reqbufs, |
| .vidioc_create_bufs = vb2_ioctl_create_bufs, |
| .vidioc_prepare_buf = vb2_ioctl_prepare_buf, |
| .vidioc_querybuf = vb2_ioctl_querybuf, |
| .vidioc_qbuf = vb2_ioctl_qbuf, |
| .vidioc_dqbuf = vb2_ioctl_dqbuf, |
| .vidioc_expbuf = vb2_ioctl_expbuf, |
| |
| .vidioc_s_std = vidioc_s_std, |
| .vidioc_g_std = vidioc_g_std, |
| .vidioc_enum_input = vidioc_enum_input, |
| .vidioc_g_input = vidioc_g_input, |
| .vidioc_s_input = vidioc_s_input, |
| |
| .vidioc_streamon = vb2_ioctl_streamon, |
| .vidioc_streamoff = vb2_ioctl_streamoff, |
| |
| .vidioc_g_tuner = vidioc_g_tuner, |
| .vidioc_s_tuner = vidioc_s_tuner, |
| .vidioc_g_frequency = vidioc_g_frequency, |
| .vidioc_s_frequency = vidioc_s_frequency, |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .vidioc_g_register = vidioc_g_register, |
| .vidioc_s_register = vidioc_s_register, |
| #endif |
| .vidioc_log_status = vidioc_log_status, |
| .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, |
| .vidioc_unsubscribe_event = v4l2_event_unsubscribe, |
| }; |
| |
| static const struct video_device au0828_video_template = { |
| .fops = &au0828_v4l_fops, |
| .release = video_device_release_empty, |
| .ioctl_ops = &video_ioctl_ops, |
| .tvnorms = V4L2_STD_NTSC_M | V4L2_STD_PAL_M, |
| }; |
| |
| static int au0828_vb2_setup(struct au0828_dev *dev) |
| { |
| int rc; |
| struct vb2_queue *q; |
| |
| /* Setup Videobuf2 for Video capture */ |
| q = &dev->vb_vidq; |
| q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| q->io_modes = VB2_READ | VB2_MMAP | VB2_USERPTR | VB2_DMABUF; |
| q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; |
| q->drv_priv = dev; |
| q->buf_struct_size = sizeof(struct au0828_buffer); |
| q->ops = &au0828_video_qops; |
| q->mem_ops = &vb2_vmalloc_memops; |
| |
| rc = vb2_queue_init(q); |
| if (rc < 0) |
| return rc; |
| |
| /* Setup Videobuf2 for VBI capture */ |
| q = &dev->vb_vbiq; |
| q->type = V4L2_BUF_TYPE_VBI_CAPTURE; |
| q->io_modes = VB2_READ | VB2_MMAP | VB2_USERPTR | VB2_DMABUF; |
| q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; |
| q->drv_priv = dev; |
| q->buf_struct_size = sizeof(struct au0828_buffer); |
| q->ops = &au0828_vbi_qops; |
| q->mem_ops = &vb2_vmalloc_memops; |
| |
| rc = vb2_queue_init(q); |
| if (rc < 0) |
| return rc; |
| |
| return 0; |
| } |
| |
| static void au0828_analog_create_entities(struct au0828_dev *dev) |
| { |
| #if defined(CONFIG_MEDIA_CONTROLLER) |
| static const char * const inames[] = { |
| [AU0828_VMUX_COMPOSITE] = "Composite", |
| [AU0828_VMUX_SVIDEO] = "S-Video", |
| [AU0828_VMUX_CABLE] = "Cable TV", |
| [AU0828_VMUX_TELEVISION] = "Television", |
| [AU0828_VMUX_DVB] = "DVB", |
| }; |
| int ret, i; |
| |
| /* Initialize Video and VBI pads */ |
| dev->video_pad.flags = MEDIA_PAD_FL_SINK; |
| ret = media_entity_pads_init(&dev->vdev.entity, 1, &dev->video_pad); |
| if (ret < 0) |
| pr_err("failed to initialize video media entity!\n"); |
| |
| dev->vbi_pad.flags = MEDIA_PAD_FL_SINK; |
| ret = media_entity_pads_init(&dev->vbi_dev.entity, 1, &dev->vbi_pad); |
| if (ret < 0) |
| pr_err("failed to initialize vbi media entity!\n"); |
| |
| /* Create entities for each input connector */ |
| for (i = 0; i < AU0828_MAX_INPUT; i++) { |
| struct media_entity *ent = &dev->input_ent[i]; |
| |
| if (AUVI_INPUT(i).type == AU0828_VMUX_UNDEFINED) |
| break; |
| |
| ent->name = inames[AUVI_INPUT(i).type]; |
| ent->flags = MEDIA_ENT_FL_CONNECTOR; |
| dev->input_pad[i].flags = MEDIA_PAD_FL_SOURCE; |
| |
| switch (AUVI_INPUT(i).type) { |
| case AU0828_VMUX_COMPOSITE: |
| ent->function = MEDIA_ENT_F_CONN_COMPOSITE; |
| break; |
| case AU0828_VMUX_SVIDEO: |
| ent->function = MEDIA_ENT_F_CONN_SVIDEO; |
| break; |
| case AU0828_VMUX_CABLE: |
| case AU0828_VMUX_TELEVISION: |
| case AU0828_VMUX_DVB: |
| default: /* Just to shut up a warning */ |
| ent->function = MEDIA_ENT_F_CONN_RF; |
| break; |
| } |
| |
| ret = media_entity_pads_init(ent, 1, &dev->input_pad[i]); |
| if (ret < 0) |
| pr_err("failed to initialize input pad[%d]!\n", i); |
| |
| ret = media_device_register_entity(dev->media_dev, ent); |
| if (ret < 0) |
| pr_err("failed to register input entity %d!\n", i); |
| } |
| #endif |
| } |
| |
| /**************************************************************************/ |
| |
| int au0828_analog_register(struct au0828_dev *dev, |
| struct usb_interface *interface) |
| { |
| int retval = -ENOMEM; |
| struct usb_host_interface *iface_desc; |
| struct usb_endpoint_descriptor *endpoint; |
| int i, ret; |
| |
| dprintk(1, "au0828_analog_register called for intf#%d!\n", |
| interface->cur_altsetting->desc.bInterfaceNumber); |
| |
| /* No analog TV */ |
| if (AUVI_INPUT(0).type == AU0828_VMUX_UNDEFINED) |
| return 0; |
| |
| /* set au0828 usb interface0 to as5 */ |
| retval = usb_set_interface(dev->usbdev, |
| interface->cur_altsetting->desc.bInterfaceNumber, 5); |
| if (retval != 0) { |
| pr_info("Failure setting usb interface0 to as5\n"); |
| return retval; |
| } |
| |
| /* Figure out which endpoint has the isoc interface */ |
| iface_desc = interface->cur_altsetting; |
| for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { |
| endpoint = &iface_desc->endpoint[i].desc; |
| if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) |
| == USB_DIR_IN) && |
| ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) |
| == USB_ENDPOINT_XFER_ISOC)) { |
| |
| /* we find our isoc in endpoint */ |
| u16 tmp = le16_to_cpu(endpoint->wMaxPacketSize); |
| dev->max_pkt_size = (tmp & 0x07ff) * |
| (((tmp & 0x1800) >> 11) + 1); |
| dev->isoc_in_endpointaddr = endpoint->bEndpointAddress; |
| dprintk(1, |
| "Found isoc endpoint 0x%02x, max size = %d\n", |
| dev->isoc_in_endpointaddr, dev->max_pkt_size); |
| } |
| } |
| if (!(dev->isoc_in_endpointaddr)) { |
| pr_info("Could not locate isoc endpoint\n"); |
| return -ENODEV; |
| } |
| |
| init_waitqueue_head(&dev->open); |
| spin_lock_init(&dev->slock); |
| |
| /* init video dma queues */ |
| INIT_LIST_HEAD(&dev->vidq.active); |
| INIT_LIST_HEAD(&dev->vbiq.active); |
| |
| setup_timer(&dev->vid_timeout, au0828_vid_buffer_timeout, |
| (unsigned long)dev); |
| setup_timer(&dev->vbi_timeout, au0828_vbi_buffer_timeout, |
| (unsigned long)dev); |
| |
| dev->width = NTSC_STD_W; |
| dev->height = NTSC_STD_H; |
| dev->field_size = dev->width * dev->height; |
| dev->frame_size = dev->field_size << 1; |
| dev->bytesperline = dev->width << 1; |
| dev->vbi_width = 720; |
| dev->vbi_height = 1; |
| dev->ctrl_ainput = 0; |
| dev->ctrl_freq = 960; |
| dev->std = V4L2_STD_NTSC_M; |
| /* Default input is TV Tuner */ |
| au0828_s_input(dev, 0); |
| |
| mutex_init(&dev->vb_queue_lock); |
| mutex_init(&dev->vb_vbi_queue_lock); |
| |
| /* Fill the video capture device struct */ |
| dev->vdev = au0828_video_template; |
| dev->vdev.v4l2_dev = &dev->v4l2_dev; |
| dev->vdev.lock = &dev->lock; |
| dev->vdev.queue = &dev->vb_vidq; |
| dev->vdev.queue->lock = &dev->vb_queue_lock; |
| strcpy(dev->vdev.name, "au0828a video"); |
| |
| /* Setup the VBI device */ |
| dev->vbi_dev = au0828_video_template; |
| dev->vbi_dev.v4l2_dev = &dev->v4l2_dev; |
| dev->vbi_dev.lock = &dev->lock; |
| dev->vbi_dev.queue = &dev->vb_vbiq; |
| dev->vbi_dev.queue->lock = &dev->vb_vbi_queue_lock; |
| strcpy(dev->vbi_dev.name, "au0828a vbi"); |
| |
| /* Init entities at the Media Controller */ |
| au0828_analog_create_entities(dev); |
| |
| /* initialize videobuf2 stuff */ |
| retval = au0828_vb2_setup(dev); |
| if (retval != 0) { |
| dprintk(1, "unable to setup videobuf2 queues (error = %d).\n", |
| retval); |
| return -ENODEV; |
| } |
| |
| /* Register the v4l2 device */ |
| video_set_drvdata(&dev->vdev, dev); |
| retval = video_register_device(&dev->vdev, VFL_TYPE_GRABBER, -1); |
| if (retval != 0) { |
| dprintk(1, "unable to register video device (error = %d).\n", |
| retval); |
| ret = -ENODEV; |
| goto err_reg_vdev; |
| } |
| |
| /* Register the vbi device */ |
| video_set_drvdata(&dev->vbi_dev, dev); |
| retval = video_register_device(&dev->vbi_dev, VFL_TYPE_VBI, -1); |
| if (retval != 0) { |
| dprintk(1, "unable to register vbi device (error = %d).\n", |
| retval); |
| ret = -ENODEV; |
| goto err_reg_vbi_dev; |
| } |
| |
| #ifdef CONFIG_MEDIA_CONTROLLER |
| retval = v4l2_mc_create_media_graph(dev->media_dev); |
| if (retval) { |
| pr_err("%s() au0282_dev_register failed to create graph\n", |
| __func__); |
| ret = -ENODEV; |
| goto err_reg_vbi_dev; |
| } |
| #endif |
| |
| dprintk(1, "%s completed!\n", __func__); |
| |
| return 0; |
| |
| err_reg_vbi_dev: |
| video_unregister_device(&dev->vdev); |
| err_reg_vdev: |
| vb2_queue_release(&dev->vb_vidq); |
| vb2_queue_release(&dev->vb_vbiq); |
| return ret; |
| } |
| |