| /* |
| * Copyright (C) 2011 Google, Inc. |
| * Copyright (C) 2012 Intel, Inc. |
| * Copyright (C) 2013 Intel, Inc. |
| * Copyright (C) 2014 Linaro Limited |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| /* This source file contains the implementation of a special device driver |
| * that intends to provide a *very* fast communication channel between the |
| * guest system and the QEMU emulator. |
| * |
| * Usage from the guest is simply the following (error handling simplified): |
| * |
| * int fd = open("/dev/qemu_pipe",O_RDWR); |
| * .... write() or read() through the pipe. |
| * |
| * This driver doesn't deal with the exact protocol used during the session. |
| * It is intended to be as simple as something like: |
| * |
| * // do this _just_ after opening the fd to connect to a specific |
| * // emulator service. |
| * const char* msg = "<pipename>"; |
| * if (write(fd, msg, strlen(msg)+1) < 0) { |
| * ... could not connect to <pipename> service |
| * close(fd); |
| * } |
| * |
| * // after this, simply read() and write() to communicate with the |
| * // service. Exact protocol details left as an exercise to the reader. |
| * |
| * This driver is very fast because it doesn't copy any data through |
| * intermediate buffers, since the emulator is capable of translating |
| * guest user addresses into host ones. |
| * |
| * Note that we must however ensure that each user page involved in the |
| * exchange is properly mapped during a transfer. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/spinlock.h> |
| #include <linux/miscdevice.h> |
| #include <linux/platform_device.h> |
| #include <linux/poll.h> |
| #include <linux/sched.h> |
| #include <linux/bitops.h> |
| #include <linux/slab.h> |
| #include <linux/io.h> |
| #include <linux/goldfish.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/mm.h> |
| #include <linux/acpi.h> |
| |
| /* |
| * IMPORTANT: The following constants must match the ones used and defined |
| * in external/qemu/hw/goldfish_pipe.c in the Android source tree. |
| */ |
| |
| /* pipe device registers */ |
| #define PIPE_REG_COMMAND 0x00 /* write: value = command */ |
| #define PIPE_REG_STATUS 0x04 /* read */ |
| #define PIPE_REG_CHANNEL 0x08 /* read/write: channel id */ |
| #define PIPE_REG_CHANNEL_HIGH 0x30 /* read/write: channel id */ |
| #define PIPE_REG_SIZE 0x0c /* read/write: buffer size */ |
| #define PIPE_REG_ADDRESS 0x10 /* write: physical address */ |
| #define PIPE_REG_ADDRESS_HIGH 0x34 /* write: physical address */ |
| #define PIPE_REG_WAKES 0x14 /* read: wake flags */ |
| #define PIPE_REG_PARAMS_ADDR_LOW 0x18 /* read/write: batch data address */ |
| #define PIPE_REG_PARAMS_ADDR_HIGH 0x1c /* read/write: batch data address */ |
| #define PIPE_REG_ACCESS_PARAMS 0x20 /* write: batch access */ |
| #define PIPE_REG_VERSION 0x24 /* read: device version */ |
| |
| /* list of commands for PIPE_REG_COMMAND */ |
| #define CMD_OPEN 1 /* open new channel */ |
| #define CMD_CLOSE 2 /* close channel (from guest) */ |
| #define CMD_POLL 3 /* poll read/write status */ |
| |
| /* List of bitflags returned in status of CMD_POLL command */ |
| #define PIPE_POLL_IN (1 << 0) |
| #define PIPE_POLL_OUT (1 << 1) |
| #define PIPE_POLL_HUP (1 << 2) |
| |
| /* The following commands are related to write operations */ |
| #define CMD_WRITE_BUFFER 4 /* send a user buffer to the emulator */ |
| #define CMD_WAKE_ON_WRITE 5 /* tell the emulator to wake us when writing |
| is possible */ |
| #define CMD_READ_BUFFER 6 /* receive a user buffer from the emulator */ |
| #define CMD_WAKE_ON_READ 7 /* tell the emulator to wake us when reading |
| * is possible */ |
| |
| /* Possible status values used to signal errors - see goldfish_pipe_error_convert */ |
| #define PIPE_ERROR_INVAL -1 |
| #define PIPE_ERROR_AGAIN -2 |
| #define PIPE_ERROR_NOMEM -3 |
| #define PIPE_ERROR_IO -4 |
| |
| /* Bit-flags used to signal events from the emulator */ |
| #define PIPE_WAKE_CLOSED (1 << 0) /* emulator closed pipe */ |
| #define PIPE_WAKE_READ (1 << 1) /* pipe can now be read from */ |
| #define PIPE_WAKE_WRITE (1 << 2) /* pipe can now be written to */ |
| |
| struct access_params { |
| unsigned long channel; |
| u32 size; |
| unsigned long address; |
| u32 cmd; |
| u32 result; |
| /* reserved for future extension */ |
| u32 flags; |
| }; |
| |
| /* The global driver data. Holds a reference to the i/o page used to |
| * communicate with the emulator, and a wake queue for blocked tasks |
| * waiting to be awoken. |
| */ |
| struct goldfish_pipe_dev { |
| spinlock_t lock; |
| unsigned char __iomem *base; |
| struct access_params *aps; |
| int irq; |
| u32 version; |
| }; |
| |
| static struct goldfish_pipe_dev pipe_dev[1]; |
| |
| /* This data type models a given pipe instance */ |
| struct goldfish_pipe { |
| struct goldfish_pipe_dev *dev; |
| struct mutex lock; |
| unsigned long flags; |
| wait_queue_head_t wake_queue; |
| }; |
| |
| |
| /* Bit flags for the 'flags' field */ |
| enum { |
| BIT_CLOSED_ON_HOST = 0, /* pipe closed by host */ |
| BIT_WAKE_ON_WRITE = 1, /* want to be woken on writes */ |
| BIT_WAKE_ON_READ = 2, /* want to be woken on reads */ |
| }; |
| |
| |
| static u32 goldfish_cmd_status(struct goldfish_pipe *pipe, u32 cmd) |
| { |
| unsigned long flags; |
| u32 status; |
| struct goldfish_pipe_dev *dev = pipe->dev; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL, |
| dev->base + PIPE_REG_CHANNEL_HIGH); |
| writel(cmd, dev->base + PIPE_REG_COMMAND); |
| status = readl(dev->base + PIPE_REG_STATUS); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| return status; |
| } |
| |
| static void goldfish_cmd(struct goldfish_pipe *pipe, u32 cmd) |
| { |
| unsigned long flags; |
| struct goldfish_pipe_dev *dev = pipe->dev; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL, |
| dev->base + PIPE_REG_CHANNEL_HIGH); |
| writel(cmd, dev->base + PIPE_REG_COMMAND); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| } |
| |
| /* This function converts an error code returned by the emulator through |
| * the PIPE_REG_STATUS i/o register into a valid negative errno value. |
| */ |
| static int goldfish_pipe_error_convert(int status) |
| { |
| switch (status) { |
| case PIPE_ERROR_AGAIN: |
| return -EAGAIN; |
| case PIPE_ERROR_NOMEM: |
| return -ENOMEM; |
| case PIPE_ERROR_IO: |
| return -EIO; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| /* |
| * Notice: QEMU will return 0 for un-known register access, indicating |
| * param_acess is supported or not |
| */ |
| static int valid_batchbuffer_addr(struct goldfish_pipe_dev *dev, |
| struct access_params *aps) |
| { |
| u32 aph, apl; |
| u64 paddr; |
| aph = readl(dev->base + PIPE_REG_PARAMS_ADDR_HIGH); |
| apl = readl(dev->base + PIPE_REG_PARAMS_ADDR_LOW); |
| |
| paddr = ((u64)aph << 32) | apl; |
| if (paddr != (__pa(aps))) |
| return 0; |
| return 1; |
| } |
| |
| /* 0 on success */ |
| static int setup_access_params_addr(struct platform_device *pdev, |
| struct goldfish_pipe_dev *dev) |
| { |
| dma_addr_t dma_handle; |
| struct access_params *aps; |
| |
| aps = dmam_alloc_coherent(&pdev->dev, sizeof(struct access_params), |
| &dma_handle, GFP_KERNEL); |
| if (!aps) |
| return -ENOMEM; |
| |
| writel(upper_32_bits(dma_handle), dev->base + PIPE_REG_PARAMS_ADDR_HIGH); |
| writel(lower_32_bits(dma_handle), dev->base + PIPE_REG_PARAMS_ADDR_LOW); |
| |
| if (valid_batchbuffer_addr(dev, aps)) { |
| dev->aps = aps; |
| return 0; |
| } else |
| return -1; |
| } |
| |
| /* A value that will not be set by qemu emulator */ |
| #define INITIAL_BATCH_RESULT (0xdeadbeaf) |
| static int access_with_param(struct goldfish_pipe_dev *dev, const int cmd, |
| unsigned long address, unsigned long avail, |
| struct goldfish_pipe *pipe, int *status) |
| { |
| struct access_params *aps = dev->aps; |
| |
| if (aps == NULL) |
| return -1; |
| |
| aps->result = INITIAL_BATCH_RESULT; |
| aps->channel = (unsigned long)pipe; |
| aps->size = avail; |
| aps->address = address; |
| aps->cmd = cmd; |
| writel(cmd, dev->base + PIPE_REG_ACCESS_PARAMS); |
| /* |
| * If the aps->result has not changed, that means |
| * that the batch command failed |
| */ |
| if (aps->result == INITIAL_BATCH_RESULT) |
| return -1; |
| *status = aps->result; |
| return 0; |
| } |
| |
| static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer, |
| size_t bufflen, int is_write) |
| { |
| unsigned long irq_flags; |
| struct goldfish_pipe *pipe = filp->private_data; |
| struct goldfish_pipe_dev *dev = pipe->dev; |
| unsigned long address, address_end; |
| int count = 0, ret = -EINVAL; |
| |
| /* If the emulator already closed the pipe, no need to go further */ |
| if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags)) |
| return -EIO; |
| |
| /* Null reads or writes succeeds */ |
| if (unlikely(bufflen == 0)) |
| return 0; |
| |
| /* Check the buffer range for access */ |
| if (!access_ok(is_write ? VERIFY_WRITE : VERIFY_READ, |
| buffer, bufflen)) |
| return -EFAULT; |
| |
| /* Serialize access to the pipe */ |
| if (mutex_lock_interruptible(&pipe->lock)) |
| return -ERESTARTSYS; |
| |
| address = (unsigned long)(void *)buffer; |
| address_end = address + bufflen; |
| |
| while (address < address_end) { |
| unsigned long page_end = (address & PAGE_MASK) + PAGE_SIZE; |
| unsigned long next = page_end < address_end ? page_end |
| : address_end; |
| unsigned long avail = next - address; |
| int status, wakeBit; |
| struct page *page; |
| |
| /* Either vaddr or paddr depending on the device version */ |
| unsigned long xaddr; |
| |
| /* |
| * We grab the pages on a page-by-page basis in case user |
| * space gives us a potentially huge buffer but the read only |
| * returns a small amount, then there's no need to pin that |
| * much memory to the process. |
| */ |
| down_read(¤t->mm->mmap_sem); |
| ret = get_user_pages(current, current->mm, address, 1, |
| !is_write, 0, &page, NULL); |
| up_read(¤t->mm->mmap_sem); |
| if (ret < 0) |
| break; |
| |
| if (dev->version) { |
| /* Device version 1 or newer (qemu-android) expects the |
| * physical address. |
| */ |
| xaddr = page_to_phys(page) | (address & ~PAGE_MASK); |
| } else { |
| /* Device version 0 (classic emulator) expects the |
| * virtual address. |
| */ |
| xaddr = address; |
| } |
| |
| /* Now, try to transfer the bytes in the current page */ |
| spin_lock_irqsave(&dev->lock, irq_flags); |
| if (access_with_param(dev, |
| is_write ? CMD_WRITE_BUFFER : CMD_READ_BUFFER, |
| xaddr, avail, pipe, &status)) { |
| gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL, |
| dev->base + PIPE_REG_CHANNEL_HIGH); |
| writel(avail, dev->base + PIPE_REG_SIZE); |
| gf_write_ptr((void *)xaddr, |
| dev->base + PIPE_REG_ADDRESS, |
| dev->base + PIPE_REG_ADDRESS_HIGH); |
| writel(is_write ? CMD_WRITE_BUFFER : CMD_READ_BUFFER, |
| dev->base + PIPE_REG_COMMAND); |
| status = readl(dev->base + PIPE_REG_STATUS); |
| } |
| spin_unlock_irqrestore(&dev->lock, irq_flags); |
| |
| if (status > 0 && !is_write) |
| set_page_dirty(page); |
| put_page(page); |
| |
| if (status > 0) { /* Correct transfer */ |
| count += status; |
| address += status; |
| continue; |
| } else if (status == 0) { /* EOF */ |
| ret = 0; |
| break; |
| } else if (status < 0 && count > 0) { |
| /* |
| * An error occurred and we already transferred |
| * something on one of the previous pages. |
| * Just return what we already copied and log this |
| * err. |
| * |
| * Note: This seems like an incorrect approach but |
| * cannot change it until we check if any user space |
| * ABI relies on this behavior. |
| */ |
| if (status != PIPE_ERROR_AGAIN) |
| pr_info_ratelimited("goldfish_pipe: backend returned error %d on %s\n", |
| status, is_write ? "write" : "read"); |
| ret = 0; |
| break; |
| } |
| |
| /* |
| * If the error is not PIPE_ERROR_AGAIN, or if we are not in |
| * non-blocking mode, just return the error code. |
| */ |
| if (status != PIPE_ERROR_AGAIN || |
| (filp->f_flags & O_NONBLOCK) != 0) { |
| ret = goldfish_pipe_error_convert(status); |
| break; |
| } |
| |
| /* |
| * The backend blocked the read/write, wait until the backend |
| * tells us it's ready to process more data. |
| */ |
| wakeBit = is_write ? BIT_WAKE_ON_WRITE : BIT_WAKE_ON_READ; |
| set_bit(wakeBit, &pipe->flags); |
| |
| /* Tell the emulator we're going to wait for a wake event */ |
| goldfish_cmd(pipe, |
| is_write ? CMD_WAKE_ON_WRITE : CMD_WAKE_ON_READ); |
| |
| /* Unlock the pipe, then wait for the wake signal */ |
| mutex_unlock(&pipe->lock); |
| |
| while (test_bit(wakeBit, &pipe->flags)) { |
| if (wait_event_interruptible( |
| pipe->wake_queue, |
| !test_bit(wakeBit, &pipe->flags))) |
| return -ERESTARTSYS; |
| |
| if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags)) |
| return -EIO; |
| } |
| |
| /* Try to re-acquire the lock */ |
| if (mutex_lock_interruptible(&pipe->lock)) |
| return -ERESTARTSYS; |
| } |
| mutex_unlock(&pipe->lock); |
| |
| if (ret < 0) |
| return ret; |
| else |
| return count; |
| } |
| |
| static ssize_t goldfish_pipe_read(struct file *filp, char __user *buffer, |
| size_t bufflen, loff_t *ppos) |
| { |
| return goldfish_pipe_read_write(filp, buffer, bufflen, 0); |
| } |
| |
| static ssize_t goldfish_pipe_write(struct file *filp, |
| const char __user *buffer, size_t bufflen, |
| loff_t *ppos) |
| { |
| return goldfish_pipe_read_write(filp, (char __user *)buffer, |
| bufflen, 1); |
| } |
| |
| |
| static unsigned int goldfish_pipe_poll(struct file *filp, poll_table *wait) |
| { |
| struct goldfish_pipe *pipe = filp->private_data; |
| unsigned int mask = 0; |
| int status; |
| |
| mutex_lock(&pipe->lock); |
| |
| poll_wait(filp, &pipe->wake_queue, wait); |
| |
| status = goldfish_cmd_status(pipe, CMD_POLL); |
| |
| mutex_unlock(&pipe->lock); |
| |
| if (status & PIPE_POLL_IN) |
| mask |= POLLIN | POLLRDNORM; |
| |
| if (status & PIPE_POLL_OUT) |
| mask |= POLLOUT | POLLWRNORM; |
| |
| if (status & PIPE_POLL_HUP) |
| mask |= POLLHUP; |
| |
| if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags)) |
| mask |= POLLERR; |
| |
| return mask; |
| } |
| |
| static irqreturn_t goldfish_pipe_interrupt(int irq, void *dev_id) |
| { |
| struct goldfish_pipe_dev *dev = dev_id; |
| unsigned long irq_flags; |
| int count = 0; |
| |
| /* |
| * We're going to read from the emulator a list of (channel,flags) |
| * pairs corresponding to the wake events that occurred on each |
| * blocked pipe (i.e. channel). |
| */ |
| spin_lock_irqsave(&dev->lock, irq_flags); |
| for (;;) { |
| /* First read the channel, 0 means the end of the list */ |
| struct goldfish_pipe *pipe; |
| unsigned long wakes; |
| unsigned long channel = 0; |
| |
| #ifdef CONFIG_64BIT |
| channel = (u64)readl(dev->base + PIPE_REG_CHANNEL_HIGH) << 32; |
| |
| if (channel == 0) |
| break; |
| #endif |
| channel |= readl(dev->base + PIPE_REG_CHANNEL); |
| |
| if (channel == 0) |
| break; |
| |
| /* Convert channel to struct pipe pointer + read wake flags */ |
| wakes = readl(dev->base + PIPE_REG_WAKES); |
| pipe = (struct goldfish_pipe *)(ptrdiff_t)channel; |
| |
| /* Did the emulator just closed a pipe? */ |
| if (wakes & PIPE_WAKE_CLOSED) { |
| set_bit(BIT_CLOSED_ON_HOST, &pipe->flags); |
| wakes |= PIPE_WAKE_READ | PIPE_WAKE_WRITE; |
| } |
| if (wakes & PIPE_WAKE_READ) |
| clear_bit(BIT_WAKE_ON_READ, &pipe->flags); |
| if (wakes & PIPE_WAKE_WRITE) |
| clear_bit(BIT_WAKE_ON_WRITE, &pipe->flags); |
| |
| wake_up_interruptible(&pipe->wake_queue); |
| count++; |
| } |
| spin_unlock_irqrestore(&dev->lock, irq_flags); |
| |
| return (count == 0) ? IRQ_NONE : IRQ_HANDLED; |
| } |
| |
| /** |
| * goldfish_pipe_open - open a channel to the AVD |
| * @inode: inode of device |
| * @file: file struct of opener |
| * |
| * Create a new pipe link between the emulator and the use application. |
| * Each new request produces a new pipe. |
| * |
| * Note: we use the pipe ID as a mux. All goldfish emulations are 32bit |
| * right now so this is fine. A move to 64bit will need this addressing |
| */ |
| static int goldfish_pipe_open(struct inode *inode, struct file *file) |
| { |
| struct goldfish_pipe *pipe; |
| struct goldfish_pipe_dev *dev = pipe_dev; |
| int32_t status; |
| |
| /* Allocate new pipe kernel object */ |
| pipe = kzalloc(sizeof(*pipe), GFP_KERNEL); |
| if (pipe == NULL) |
| return -ENOMEM; |
| |
| pipe->dev = dev; |
| mutex_init(&pipe->lock); |
| init_waitqueue_head(&pipe->wake_queue); |
| |
| /* |
| * Now, tell the emulator we're opening a new pipe. We use the |
| * pipe object's address as the channel identifier for simplicity. |
| */ |
| |
| status = goldfish_cmd_status(pipe, CMD_OPEN); |
| if (status < 0) { |
| kfree(pipe); |
| return status; |
| } |
| |
| /* All is done, save the pipe into the file's private data field */ |
| file->private_data = pipe; |
| return 0; |
| } |
| |
| static int goldfish_pipe_release(struct inode *inode, struct file *filp) |
| { |
| struct goldfish_pipe *pipe = filp->private_data; |
| |
| /* The guest is closing the channel, so tell the emulator right now */ |
| goldfish_cmd(pipe, CMD_CLOSE); |
| kfree(pipe); |
| filp->private_data = NULL; |
| return 0; |
| } |
| |
| static const struct file_operations goldfish_pipe_fops = { |
| .owner = THIS_MODULE, |
| .read = goldfish_pipe_read, |
| .write = goldfish_pipe_write, |
| .poll = goldfish_pipe_poll, |
| .open = goldfish_pipe_open, |
| .release = goldfish_pipe_release, |
| }; |
| |
| static struct miscdevice goldfish_pipe_device = { |
| .minor = MISC_DYNAMIC_MINOR, |
| .name = "goldfish_pipe", |
| .fops = &goldfish_pipe_fops, |
| }; |
| |
| static int goldfish_pipe_probe(struct platform_device *pdev) |
| { |
| int err; |
| struct resource *r; |
| struct goldfish_pipe_dev *dev = pipe_dev; |
| |
| /* not thread safe, but this should not happen */ |
| WARN_ON(dev->base != NULL); |
| |
| spin_lock_init(&dev->lock); |
| |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (r == NULL || resource_size(r) < PAGE_SIZE) { |
| dev_err(&pdev->dev, "can't allocate i/o page\n"); |
| return -EINVAL; |
| } |
| dev->base = devm_ioremap(&pdev->dev, r->start, PAGE_SIZE); |
| if (dev->base == NULL) { |
| dev_err(&pdev->dev, "ioremap failed\n"); |
| return -EINVAL; |
| } |
| |
| r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (r == NULL) { |
| err = -EINVAL; |
| goto error; |
| } |
| dev->irq = r->start; |
| |
| err = devm_request_irq(&pdev->dev, dev->irq, goldfish_pipe_interrupt, |
| IRQF_SHARED, "goldfish_pipe", dev); |
| if (err) { |
| dev_err(&pdev->dev, "unable to allocate IRQ\n"); |
| goto error; |
| } |
| |
| err = misc_register(&goldfish_pipe_device); |
| if (err) { |
| dev_err(&pdev->dev, "unable to register device\n"); |
| goto error; |
| } |
| setup_access_params_addr(pdev, dev); |
| |
| /* Although the pipe device in the classic Android emulator does not |
| * recognize the 'version' register, it won't treat this as an error |
| * either and will simply return 0, which is fine. |
| */ |
| dev->version = readl(dev->base + PIPE_REG_VERSION); |
| return 0; |
| |
| error: |
| dev->base = NULL; |
| return err; |
| } |
| |
| static int goldfish_pipe_remove(struct platform_device *pdev) |
| { |
| struct goldfish_pipe_dev *dev = pipe_dev; |
| misc_deregister(&goldfish_pipe_device); |
| dev->base = NULL; |
| return 0; |
| } |
| |
| static const struct acpi_device_id goldfish_pipe_acpi_match[] = { |
| { "GFSH0003", 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(acpi, goldfish_pipe_acpi_match); |
| |
| static const struct of_device_id goldfish_pipe_of_match[] = { |
| { .compatible = "google,android-pipe", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, goldfish_pipe_of_match); |
| |
| static struct platform_driver goldfish_pipe = { |
| .probe = goldfish_pipe_probe, |
| .remove = goldfish_pipe_remove, |
| .driver = { |
| .name = "goldfish_pipe", |
| .owner = THIS_MODULE, |
| .of_match_table = goldfish_pipe_of_match, |
| .acpi_match_table = ACPI_PTR(goldfish_pipe_acpi_match), |
| } |
| }; |
| |
| module_platform_driver(goldfish_pipe); |
| MODULE_AUTHOR("David Turner <digit@google.com>"); |
| MODULE_LICENSE("GPL"); |