| /* |
| * arch/arm/mach-at91/at91sam9rl.c |
| * |
| * Copyright (C) 2005 SAN People |
| * Copyright (C) 2007 Atmel Corporation |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive for |
| * more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/pm.h> |
| |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <mach/cpu.h> |
| #include <mach/at91sam9rl.h> |
| #include <mach/at91_pmc.h> |
| #include <mach/at91_rstc.h> |
| #include <mach/at91_shdwc.h> |
| |
| #include "generic.h" |
| #include "clock.h" |
| |
| static struct map_desc at91sam9rl_io_desc[] __initdata = { |
| { |
| .virtual = AT91_VA_BASE_SYS, |
| .pfn = __phys_to_pfn(AT91_BASE_SYS), |
| .length = SZ_16K, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| static struct map_desc at91sam9rl_sram_desc[] __initdata = { |
| { |
| .pfn = __phys_to_pfn(AT91SAM9RL_SRAM_BASE), |
| .type = MT_DEVICE, |
| } |
| }; |
| |
| /* -------------------------------------------------------------------- |
| * Clocks |
| * -------------------------------------------------------------------- */ |
| |
| /* |
| * The peripheral clocks. |
| */ |
| static struct clk pioA_clk = { |
| .name = "pioA_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_PIOA, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pioB_clk = { |
| .name = "pioB_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_PIOB, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pioC_clk = { |
| .name = "pioC_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_PIOC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pioD_clk = { |
| .name = "pioD_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_PIOD, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart0_clk = { |
| .name = "usart0_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_US0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart1_clk = { |
| .name = "usart1_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_US1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart2_clk = { |
| .name = "usart2_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_US2, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart3_clk = { |
| .name = "usart3_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_US3, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk mmc_clk = { |
| .name = "mci_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_MCI, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk twi0_clk = { |
| .name = "twi0_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_TWI0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk twi1_clk = { |
| .name = "twi1_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_TWI1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk spi_clk = { |
| .name = "spi_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_SPI, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ssc0_clk = { |
| .name = "ssc0_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_SSC0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ssc1_clk = { |
| .name = "ssc1_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_SSC1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tc0_clk = { |
| .name = "tc0_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_TC0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tc1_clk = { |
| .name = "tc1_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_TC1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tc2_clk = { |
| .name = "tc2_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_TC2, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pwm_clk = { |
| .name = "pwm_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_PWMC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tsc_clk = { |
| .name = "tsc_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_TSC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk dma_clk = { |
| .name = "dma_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_DMA, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk udphs_clk = { |
| .name = "udphs_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_UDPHS, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk lcdc_clk = { |
| .name = "lcdc_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_LCDC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ac97_clk = { |
| .name = "ac97_clk", |
| .pmc_mask = 1 << AT91SAM9RL_ID_AC97C, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| |
| static struct clk *periph_clocks[] __initdata = { |
| &pioA_clk, |
| &pioB_clk, |
| &pioC_clk, |
| &pioD_clk, |
| &usart0_clk, |
| &usart1_clk, |
| &usart2_clk, |
| &usart3_clk, |
| &mmc_clk, |
| &twi0_clk, |
| &twi1_clk, |
| &spi_clk, |
| &ssc0_clk, |
| &ssc1_clk, |
| &tc0_clk, |
| &tc1_clk, |
| &tc2_clk, |
| &pwm_clk, |
| &tsc_clk, |
| &dma_clk, |
| &udphs_clk, |
| &lcdc_clk, |
| &ac97_clk, |
| // irq0 |
| }; |
| |
| /* |
| * The two programmable clocks. |
| * You must configure pin multiplexing to bring these signals out. |
| */ |
| static struct clk pck0 = { |
| .name = "pck0", |
| .pmc_mask = AT91_PMC_PCK0, |
| .type = CLK_TYPE_PROGRAMMABLE, |
| .id = 0, |
| }; |
| static struct clk pck1 = { |
| .name = "pck1", |
| .pmc_mask = AT91_PMC_PCK1, |
| .type = CLK_TYPE_PROGRAMMABLE, |
| .id = 1, |
| }; |
| |
| static void __init at91sam9rl_register_clocks(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) |
| clk_register(periph_clocks[i]); |
| |
| clk_register(&pck0); |
| clk_register(&pck1); |
| } |
| |
| /* -------------------------------------------------------------------- |
| * GPIO |
| * -------------------------------------------------------------------- */ |
| |
| static struct at91_gpio_bank at91sam9rl_gpio[] = { |
| { |
| .id = AT91SAM9RL_ID_PIOA, |
| .offset = AT91_PIOA, |
| .clock = &pioA_clk, |
| }, { |
| .id = AT91SAM9RL_ID_PIOB, |
| .offset = AT91_PIOB, |
| .clock = &pioB_clk, |
| }, { |
| .id = AT91SAM9RL_ID_PIOC, |
| .offset = AT91_PIOC, |
| .clock = &pioC_clk, |
| }, { |
| .id = AT91SAM9RL_ID_PIOD, |
| .offset = AT91_PIOD, |
| .clock = &pioD_clk, |
| } |
| }; |
| |
| static void at91sam9rl_reset(void) |
| { |
| at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); |
| } |
| |
| static void at91sam9rl_poweroff(void) |
| { |
| at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); |
| } |
| |
| |
| /* -------------------------------------------------------------------- |
| * AT91SAM9RL processor initialization |
| * -------------------------------------------------------------------- */ |
| |
| void __init at91sam9rl_initialize(unsigned long main_clock) |
| { |
| unsigned long cidr, sram_size; |
| |
| /* Map peripherals */ |
| iotable_init(at91sam9rl_io_desc, ARRAY_SIZE(at91sam9rl_io_desc)); |
| |
| cidr = at91_sys_read(AT91_DBGU_CIDR); |
| |
| switch (cidr & AT91_CIDR_SRAMSIZ) { |
| case AT91_CIDR_SRAMSIZ_32K: |
| sram_size = 2 * SZ_16K; |
| break; |
| case AT91_CIDR_SRAMSIZ_16K: |
| default: |
| sram_size = SZ_16K; |
| } |
| |
| at91sam9rl_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size; |
| at91sam9rl_sram_desc->length = sram_size; |
| |
| /* Map SRAM */ |
| iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); |
| |
| at91_arch_reset = at91sam9rl_reset; |
| pm_power_off = at91sam9rl_poweroff; |
| at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); |
| |
| /* Init clock subsystem */ |
| at91_clock_init(main_clock); |
| |
| /* Register the processor-specific clocks */ |
| at91sam9rl_register_clocks(); |
| |
| /* Register GPIO subsystem */ |
| at91_gpio_init(at91sam9rl_gpio, 4); |
| } |
| |
| /* -------------------------------------------------------------------- |
| * Interrupt initialization |
| * -------------------------------------------------------------------- */ |
| |
| /* |
| * The default interrupt priority levels (0 = lowest, 7 = highest). |
| */ |
| static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { |
| 7, /* Advanced Interrupt Controller */ |
| 7, /* System Peripherals */ |
| 1, /* Parallel IO Controller A */ |
| 1, /* Parallel IO Controller B */ |
| 1, /* Parallel IO Controller C */ |
| 1, /* Parallel IO Controller D */ |
| 5, /* USART 0 */ |
| 5, /* USART 1 */ |
| 5, /* USART 2 */ |
| 5, /* USART 3 */ |
| 0, /* Multimedia Card Interface */ |
| 6, /* Two-Wire Interface 0 */ |
| 6, /* Two-Wire Interface 1 */ |
| 5, /* Serial Peripheral Interface */ |
| 4, /* Serial Synchronous Controller 0 */ |
| 4, /* Serial Synchronous Controller 1 */ |
| 0, /* Timer Counter 0 */ |
| 0, /* Timer Counter 1 */ |
| 0, /* Timer Counter 2 */ |
| 0, |
| 0, /* Touch Screen Controller */ |
| 0, /* DMA Controller */ |
| 2, /* USB Device High speed port */ |
| 2, /* LCD Controller */ |
| 6, /* AC97 Controller */ |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, /* Advanced Interrupt Controller */ |
| }; |
| |
| void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS]) |
| { |
| if (!priority) |
| priority = at91sam9rl_default_irq_priority; |
| |
| /* Initialize the AIC interrupt controller */ |
| at91_aic_init(priority); |
| |
| /* Enable GPIO interrupts */ |
| at91_gpio_irq_setup(); |
| } |