| /* |
| * P1021 MDS Device Tree Source |
| * |
| * Copyright 2010 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /include/ "fsl/p1021si-pre.dtsi" |
| / { |
| model = "fsl,P1021"; |
| compatible = "fsl,P1021MDS"; |
| |
| aliases { |
| ethernet3 = &enet3; |
| ethernet4 = &enet4; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| }; |
| |
| lbc: localbus@ffe05000 { |
| reg = <0x0 0xffe05000 0x0 0x1000>; |
| |
| /* NAND Flash, BCSR, PMC0/1*/ |
| ranges = <0x0 0x0 0x0 0xfc000000 0x02000000 |
| 0x1 0x0 0x0 0xf8000000 0x00008000 |
| 0x2 0x0 0x0 0xf8010000 0x00020000 |
| 0x3 0x0 0x0 0xf8020000 0x00020000>; |
| |
| nand@0,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,p1021-fcm-nand", |
| "fsl,elbc-fcm-nand"; |
| reg = <0x0 0x0 0x40000>; |
| |
| partition@0 { |
| /* This location must not be altered */ |
| /* 1MB for u-boot Bootloader Image */ |
| reg = <0x0 0x00100000>; |
| label = "NAND (RO) U-Boot Image"; |
| read-only; |
| }; |
| |
| partition@100000 { |
| /* 1MB for DTB Image */ |
| reg = <0x00100000 0x00100000>; |
| label = "NAND (RO) DTB Image"; |
| read-only; |
| }; |
| |
| partition@200000 { |
| /* 4MB for Linux Kernel Image */ |
| reg = <0x00200000 0x00400000>; |
| label = "NAND (RO) Linux Kernel Image"; |
| read-only; |
| }; |
| |
| partition@600000 { |
| /* 5MB for Compressed Root file System Image */ |
| reg = <0x00600000 0x00500000>; |
| label = "NAND (RO) Compressed RFS Image"; |
| read-only; |
| }; |
| |
| partition@b00000 { |
| /* 6MB for JFFS2 based Root file System */ |
| reg = <0x00a00000 0x00600000>; |
| label = "NAND (RW) JFFS2 Root File System"; |
| }; |
| |
| partition@1100000 { |
| /* 14MB for JFFS2 based Root file System */ |
| reg = <0x01100000 0x00e00000>; |
| label = "NAND (RW) Writable User area"; |
| }; |
| |
| partition@1f00000 { |
| /* 1MB for microcode */ |
| reg = <0x01f00000 0x00100000>; |
| label = "NAND (RO) QE Ucode"; |
| read-only; |
| }; |
| }; |
| |
| bcsr@1,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,p1021mds-bcsr"; |
| reg = <1 0 0x8000>; |
| ranges = <0 1 0 0x8000>; |
| }; |
| |
| pib@2,0 { |
| compatible = "fsl,p1021mds-pib"; |
| reg = <2 0 0x10000>; |
| }; |
| |
| pib@3,0 { |
| compatible = "fsl,p1021mds-pib"; |
| reg = <3 0 0x10000>; |
| }; |
| }; |
| |
| soc: soc@ffe00000 { |
| compatible = "fsl,p1021-immr", "simple-bus"; |
| ranges = <0x0 0x0 0xffe00000 0x100000>; |
| |
| i2c@3000 { |
| rtc@68 { |
| compatible = "dallas,ds1374"; |
| reg = <0x68>; |
| }; |
| }; |
| |
| spi@7000 { |
| |
| flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "spansion,s25sl12801"; |
| reg = <0>; |
| spi-max-frequency = <40000000>; /* input clock */ |
| |
| partition@u-boot { |
| label = "u-boot-spi"; |
| reg = <0x00000000 0x00100000>; |
| read-only; |
| }; |
| partition@kernel { |
| label = "kernel-spi"; |
| reg = <0x00100000 0x00500000>; |
| read-only; |
| }; |
| partition@dtb { |
| label = "dtb-spi"; |
| reg = <0x00600000 0x00100000>; |
| read-only; |
| }; |
| partition@fs { |
| label = "file system-spi"; |
| reg = <0x00700000 0x00900000>; |
| }; |
| }; |
| }; |
| |
| usb@22000 { |
| phy_type = "ulpi"; |
| }; |
| |
| mdio@24000 { |
| phy0: ethernet-phy@0 { |
| interrupts = <1 1 0 0>; |
| reg = <0x0>; |
| }; |
| phy1: ethernet-phy@1 { |
| interrupts = <2 1 0 0>; |
| reg = <0x1>; |
| }; |
| phy4: ethernet-phy@4 { |
| reg = <0x4>; |
| }; |
| tbi-phy@5 { |
| device_type = "tbi-phy"; |
| reg = <0x5>; |
| }; |
| }; |
| |
| mdio@25000 { |
| tbi0: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| |
| ethernet@b0000 { |
| phy-handle = <&phy0>; |
| phy-connection-type = "rgmii-id"; |
| }; |
| |
| ethernet@b1000 { |
| phy-handle = <&phy4>; |
| tbi-handle = <&tbi0>; |
| phy-connection-type = "sgmii"; |
| }; |
| |
| ethernet@b2000 { |
| phy-handle = <&phy1>; |
| phy-connection-type = "rgmii-id"; |
| }; |
| |
| par_io@e0100 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xe0100 0x60>; |
| ranges = <0x0 0xe0100 0x60>; |
| device_type = "par_io"; |
| num-ports = <3>; |
| pio1: ucc_pin@01 { |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ |
| 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ |
| 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ |
| 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ |
| 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ |
| 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ |
| 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ |
| 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ |
| 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ |
| 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ |
| 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ |
| 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ |
| 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ |
| 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ |
| 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ |
| 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ |
| 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ |
| 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ |
| }; |
| |
| pio2: ucc_pin@02 { |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ |
| 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ |
| 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ |
| 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ |
| 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ |
| 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ |
| 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ |
| 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ |
| 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ |
| 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ |
| }; |
| }; |
| }; |
| |
| pci0: pcie@ffe09000 { |
| reg = <0 0xffe09000 0 0x1000>; |
| ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 |
| 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; |
| pcie@0 { |
| ranges = <0x2000000 0x0 0xa0000000 |
| 0x2000000 0x0 0xa0000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x100000>; |
| }; |
| }; |
| |
| pci1: pcie@ffe0a000 { |
| reg = <0 0xffe0a000 0 0x1000>; |
| ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 |
| 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; |
| pcie@0 { |
| ranges = <0x2000000 0x0 0xc0000000 |
| 0x2000000 0x0 0xc0000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x100000>; |
| }; |
| }; |
| |
| qe: qe@ffe80000 { |
| ranges = <0x0 0x0 0xffe80000 0x40000>; |
| reg = <0 0xffe80000 0 0x480>; |
| brg-frequency = <0>; |
| bus-frequency = <0>; |
| status = "disabled"; /* no firmware loaded */ |
| |
| enet3: ucc@2000 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "clk12"; |
| tx-clock-name = "clk9"; |
| pio-handle = <&pio1>; |
| phy-handle = <&qe_phy0>; |
| phy-connection-type = "mii"; |
| }; |
| |
| mdio@2120 { |
| qe_phy0: ethernet-phy@0 { |
| interrupt-parent = <&mpic>; |
| interrupts = <4 1 0 0>; |
| reg = <0x0>; |
| device_type = "ethernet-phy"; |
| }; |
| qe_phy1: ethernet-phy@03 { |
| interrupt-parent = <&mpic>; |
| interrupts = <5 1 0 0>; |
| reg = <0x3>; |
| device_type = "ethernet-phy"; |
| }; |
| tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| |
| enet4: ucc@2400 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "none"; |
| tx-clock-name = "clk13"; |
| pio-handle = <&pio2>; |
| phy-handle = <&qe_phy1>; |
| phy-connection-type = "rmii"; |
| }; |
| }; |
| }; |
| |
| /include/ "fsl/p1021si-post.dtsi" |