| /* |
| * arch/arm/mach-pxa/include/mach/poodle.h |
| * |
| * May be copied or modified under the terms of the GNU General Public |
| * License. See linux/COPYING for more information. |
| * |
| * Based on: |
| * arch/arm/mach-sa1100/include/mach/collie.h |
| * |
| * ChangeLog: |
| * 04-06-2001 Lineo Japan, Inc. |
| * 04-16-2001 SHARP Corporation |
| * Update to 2.6 John Lenz |
| */ |
| #ifndef __ASM_ARCH_POODLE_H |
| #define __ASM_ARCH_POODLE_H 1 |
| |
| /* |
| * GPIOs |
| */ |
| /* PXA GPIOs */ |
| #define POODLE_GPIO_ON_KEY (0) |
| #define POODLE_GPIO_AC_IN (1) |
| #define POODLE_GPIO_CO 16 |
| #define POODLE_GPIO_TP_INT (5) |
| #define POODLE_GPIO_TP_CS (24) |
| #define POODLE_GPIO_WAKEUP (11) /* change battery */ |
| #define POODLE_GPIO_GA_INT (10) |
| #define POODLE_GPIO_IR_ON (22) |
| #define POODLE_GPIO_HP_IN (4) |
| #define POODLE_GPIO_CF_IRQ (17) |
| #define POODLE_GPIO_CF_CD (14) |
| #define POODLE_GPIO_CF_STSCHG (14) |
| #define POODLE_GPIO_SD_PWR (33) |
| #define POODLE_GPIO_SD_PWR1 (3) |
| #define POODLE_GPIO_nSD_CLK (6) |
| #define POODLE_GPIO_nSD_WP (7) |
| #define POODLE_GPIO_nSD_INT (8) |
| #define POODLE_GPIO_nSD_DETECT (9) |
| #define POODLE_GPIO_MAIN_BAT_LOW (13) |
| #define POODLE_GPIO_BAT_COVER (13) |
| #define POODLE_GPIO_USB_PULLUP (20) |
| #define POODLE_GPIO_ADC_TEMP_ON (21) |
| #define POODLE_GPIO_BYPASS_ON (36) |
| #define POODLE_GPIO_CHRG_ON (38) |
| #define POODLE_GPIO_CHRG_FULL (16) |
| #define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */ |
| |
| /* PXA GPIOs */ |
| #define POODLE_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(0) |
| #define POODLE_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(1) |
| #define POODLE_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(4) |
| #define POODLE_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(16) |
| #define POODLE_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(5) |
| #define POODLE_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(11) |
| #define POODLE_IRQ_GPIO_GA_INT PXA_GPIO_TO_IRQ(10) |
| #define POODLE_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(17) |
| #define POODLE_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(14) |
| #define POODLE_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(8) |
| #define POODLE_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(9) |
| #define POODLE_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(13) |
| |
| /* SCOOP GPIOs */ |
| #define POODLE_SCOOP_CHARGE_ON SCOOP_GPCR_PA11 |
| #define POODLE_SCOOP_CP401 SCOOP_GPCR_PA13 |
| #define POODLE_SCOOP_VPEN SCOOP_GPCR_PA18 |
| #define POODLE_SCOOP_L_PCLK SCOOP_GPCR_PA20 |
| #define POODLE_SCOOP_L_LCLK SCOOP_GPCR_PA21 |
| #define POODLE_SCOOP_HS_OUT SCOOP_GPCR_PA22 |
| |
| #define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT ) |
| #define POODLE_SCOOP_IO_OUT ( 0 ) |
| |
| #define POODLE_SCOOP_GPIO_BASE (PXA_NR_BUILTIN_GPIO) |
| #define POODLE_GPIO_CHARGE_ON (POODLE_SCOOP_GPIO_BASE + 0) |
| #define POODLE_GPIO_CP401 (POODLE_SCOOP_GPIO_BASE + 2) |
| #define POODLE_GPIO_VPEN (POODLE_SCOOP_GPIO_BASE + 7) |
| #define POODLE_GPIO_L_PCLK (POODLE_SCOOP_GPIO_BASE + 9) |
| #define POODLE_GPIO_L_LCLK (POODLE_SCOOP_GPIO_BASE + 10) |
| #define POODLE_GPIO_HS_OUT (POODLE_SCOOP_GPIO_BASE + 11) |
| |
| #define POODLE_LOCOMO_GPIO_AMP_ON LOCOMO_GPIO(8) |
| #define POODLE_LOCOMO_GPIO_MUTE_L LOCOMO_GPIO(10) |
| #define POODLE_LOCOMO_GPIO_MUTE_R LOCOMO_GPIO(11) |
| #define POODLE_LOCOMO_GPIO_232VCC_ON LOCOMO_GPIO(12) |
| #define POODLE_LOCOMO_GPIO_JK_B LOCOMO_GPIO(13) |
| |
| #define POODLE_NR_IRQS (IRQ_BOARD_START + 4) /* 4 for LoCoMo */ |
| |
| extern struct platform_device poodle_locomo_device; |
| |
| #endif /* __ASM_ARCH_POODLE_H */ |