include/net/mac802154.h - kernel/msm-4.19 - Gitiles

 /*
  * IEEE802.15.4-2003 specification
  *
  * Copyright (C) 2007-2012 Siemens AG
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2
  * as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  */
 #ifndef NET_MAC802154_H
 #define NET_MAC802154_H

 #include <net/af_ieee802154.h>
 #include <linux/ieee802154.h>
 #include <linux/skbuff.h>
 #include <linux/unaligned/memmove.h>

 #include <net/cfg802154.h>

 /* General MAC frame format:
  *  2 bytes: Frame Control
  *  1 byte:  Sequence Number
  * 20 bytes: Addressing fields
  * 14 bytes: Auxiliary Security Header
  */
 #define MAC802154_FRAME_HARD_HEADER_LEN		(2 + 1 + 20 + 14)

 /**
  * enum ieee802154_hw_addr_filt_flags - hardware address filtering flags
  *
  * The following flags are used to indicate changed address settings from
  * the stack to the hardware.
  *
  * @IEEE802154_AFILT_SADDR_CHANGED: Indicates that the short address will be
  *	change.
  *
  * @IEEE802154_AFILT_IEEEADDR_CHANGED: Indicates that the extended address
  *	will be change.
  *
  * @IEEE802154_AFILT_PANID_CHANGED: Indicates that the pan id will be change.
  *
  * @IEEE802154_AFILT_PANC_CHANGED: Indicates that the address filter will
  *	do frame address filtering as a pan coordinator.
  */
 enum ieee802154_hw_addr_filt_flags {
 	IEEE802154_AFILT_SADDR_CHANGED		= BIT(1),
 	IEEE802154_AFILT_IEEEADDR_CHANGED	= BIT(2),
 	IEEE802154_AFILT_PANID_CHANGED		= BIT(3),
 	IEEE802154_AFILT_PANC_CHANGED		= BIT(4),
 };

 struct ieee802154_hw_addr_filt {
 	__le16	pan_id;		/* Each independent PAN selects a unique
 				 * identifier. This PAN id allows communication
 				 * between devices within a network using short
 				 * addresses and enables transmissions between
 				 * devices across independent networks.
 				 */
 	__le16	short_addr;
 	__le64	ieee_addr;
 	u8	pan_coord;
 };

 struct ieee802154_hw {
 	/* filled by the driver */
 	int	extra_tx_headroom;
 	u32	flags;
 	struct	device *parent;

 	/* filled by mac802154 core */
 	struct	ieee802154_hw_addr_filt hw_filt;
 	void	*priv;
 	struct	wpan_phy *phy;
 };

 /* Checksum is in hardware and is omitted from a packet
  *
  * These following flags are used to indicate hardware capabilities to
  * the stack. Generally, flags here should have their meaning
  * done in a way that the simplest hardware doesn't need setting
  * any particular flags. There are some exceptions to this rule,
  * however, so you are advised to review these flags carefully.
  */

 /* Indicates that xmitter will add FCS on it's own. */
 #define IEEE802154_HW_TX_OMIT_CKSUM	0x00000001
 /* Indicates that transceiver will support listen before transmit. */
 #define IEEE802154_HW_LBT		0x00000004
 /* Indicates that transceiver will support csma (max_be, min_be, csma retries)
  * settings. */
 #define IEEE802154_HW_CSMA_PARAMS	0x00000008
 /* Indicates that transceiver will support ARET frame retries setting. */
 #define IEEE802154_HW_FRAME_RETRIES	0x00000010
 /* Indicates that transceiver will support hardware address filter setting. */
 #define IEEE802154_HW_AFILT		0x00000020
 /* Indicates that transceiver will support promiscuous mode setting. */
 #define IEEE802154_HW_PROMISCUOUS	0x00000040
 /* Indicates that receiver omits FCS. */
 #define IEEE802154_HW_RX_OMIT_CKSUM	0x00000080
 /* Indicates that receiver will not filter frames with bad checksum. */
 #define IEEE802154_HW_RX_DROP_BAD_CKSUM	0x00000100

 /* Indicates that receiver omits FCS and xmitter will add FCS on it's own. */
 #define IEEE802154_HW_OMIT_CKSUM	(IEEE802154_HW_TX_OMIT_CKSUM | \
 					 IEEE802154_HW_RX_OMIT_CKSUM)

 /* struct ieee802154_ops - callbacks from mac802154 to the driver
  *
  * This structure contains various callbacks that the driver may
  * handle or, in some cases, must handle, for example to transmit
  * a frame.
  *
  * start: Handler that 802.15.4 module calls for device initialization.
  *	  This function is called before the first interface is attached.
  *
  * stop:  Handler that 802.15.4 module calls for device cleanup.
  *	  This function is called after the last interface is removed.
  *
  * xmit_sync:
  *	  Handler that 802.15.4 module calls for each transmitted frame.
  *	  skb cntains the buffer starting from the IEEE 802.15.4 header.
  *	  The low-level driver should send the frame based on available
  *	  configuration. This is called by a workqueue and useful for
  *	  synchronous 802.15.4 drivers.
  *	  This function should return zero or negative errno.
  *
  *	  WARNING:
  *	  This will be deprecated soon. We don't accept synced xmit callbacks
  *	  drivers anymore.
  *
  * xmit_async:
  *	  Handler that 802.15.4 module calls for each transmitted frame.
  *	  skb cntains the buffer starting from the IEEE 802.15.4 header.
  *	  The low-level driver should send the frame based on available
  *	  configuration.
  *	  This function should return zero or negative errno.
  *
  * ed:    Handler that 802.15.4 module calls for Energy Detection.
  *	  This function should place the value for detected energy
  *	  (usually device-dependant) in the level pointer and return
  *	  either zero or negative errno. Called with pib_lock held.
  *
  * set_channel:
  * 	  Set radio for listening on specific channel.
  *	  Set the device for listening on specified channel.
  *	  Returns either zero, or negative errno. Called with pib_lock held.
  *
  * set_hw_addr_filt:
  *	  Set radio for listening on specific address.
  *	  Set the device for listening on specified address.
  *	  Returns either zero, or negative errno.
  *
  * set_txpower:
  *	  Set radio transmit power in mBm. Called with pib_lock held.
  *	  Returns either zero, or negative errno.
  *
  * set_lbt
  *	  Enables or disables listen before talk on the device. Called with
  *	  pib_lock held.
  *	  Returns either zero, or negative errno.
  *
  * set_cca_mode
  *	  Sets the CCA mode used by the device. Called with pib_lock held.
  *	  Returns either zero, or negative errno.
  *
  * set_cca_ed_level
  *	  Sets the CCA energy detection threshold in mBm. Called with pib_lock
  *	  held.
  *	  Returns either zero, or negative errno.
  *
  * set_csma_params
  *	  Sets the CSMA parameter set for the PHY. Called with pib_lock held.
  *	  Returns either zero, or negative errno.
  *
  * set_frame_retries
  *	  Sets the retransmission attempt limit. Called with pib_lock held.
  *	  Returns either zero, or negative errno.
  *
  * set_promiscuous_mode
  *	  Enables or disable promiscuous mode.
  */
 struct ieee802154_ops {
 	struct module	*owner;
 	int		(*start)(struct ieee802154_hw *hw);
 	void		(*stop)(struct ieee802154_hw *hw);
 	int		(*xmit_sync)(struct ieee802154_hw *hw,
 				     struct sk_buff *skb);
 	int		(*xmit_async)(struct ieee802154_hw *hw,
 				      struct sk_buff *skb);
 	int		(*ed)(struct ieee802154_hw *hw, u8 *level);
 	int		(*set_channel)(struct ieee802154_hw *hw, u8 page,
 				       u8 channel);
 	int		(*set_hw_addr_filt)(struct ieee802154_hw *hw,
 					    struct ieee802154_hw_addr_filt *filt,
 					    unsigned long changed);
 	int		(*set_txpower)(struct ieee802154_hw *hw, s32 mbm);
 	int		(*set_lbt)(struct ieee802154_hw *hw, bool on);
 	int		(*set_cca_mode)(struct ieee802154_hw *hw,
 					const struct wpan_phy_cca *cca);
 	int		(*set_cca_ed_level)(struct ieee802154_hw *hw, s32 mbm);
 	int		(*set_csma_params)(struct ieee802154_hw *hw,
 					   u8 min_be, u8 max_be, u8 retries);
 	int		(*set_frame_retries)(struct ieee802154_hw *hw,
 					     s8 retries);
 	int             (*set_promiscuous_mode)(struct ieee802154_hw *hw,
 						const bool on);
 };

 /**
  * ieee802154_be64_to_le64 - copies and convert be64 to le64
  * @le64_dst: le64 destination pointer
  * @be64_src: be64 source pointer
  */
 static inline void ieee802154_be64_to_le64(void *le64_dst, const void *be64_src)
 {
 	__put_unaligned_memmove64(swab64p(be64_src), le64_dst);
 }

 /**
  * ieee802154_le64_to_be64 - copies and convert le64 to be64
  * @be64_dst: be64 destination pointer
  * @le64_src: le64 source pointer
  */
 static inline void ieee802154_le64_to_be64(void *be64_dst, const void *le64_src)
 {
 	__put_unaligned_memmove64(swab64p(le64_src), be64_dst);
 }

 /**
  * ieee802154_alloc_hw - Allocate a new hardware device
  *
  * This must be called once for each hardware device. The returned pointer
  * must be used to refer to this device when calling other functions.
  * mac802154 allocates a private data area for the driver pointed to by
  * @priv in &struct ieee802154_hw, the size of this area is given as
  * @priv_data_len.
  *
  * @priv_data_len: length of private data
  * @ops: callbacks for this device
  *
  * Return: A pointer to the new hardware device, or %NULL on error.
  */
 struct ieee802154_hw *
 ieee802154_alloc_hw(size_t priv_data_len, const struct ieee802154_ops *ops);

 /**
  * ieee802154_free_hw - free hardware descriptor
  *
  * This function frees everything that was allocated, including the
  * private data for the driver. You must call ieee802154_unregister_hw()
  * before calling this function.
  *
  * @hw: the hardware to free
  */
 void ieee802154_free_hw(struct ieee802154_hw *hw);

 /**
  * ieee802154_register_hw - Register hardware device
  *
  * You must call this function before any other functions in
  * mac802154. Note that before a hardware can be registered, you
  * need to fill the contained wpan_phy's information.
  *
  * @hw: the device to register as returned by ieee802154_alloc_hw()
  *
  * Return: 0 on success. An error code otherwise.
  */
 int ieee802154_register_hw(struct ieee802154_hw *hw);

 /**
  * ieee802154_unregister_hw - Unregister a hardware device
  *
  * This function instructs mac802154 to free allocated resources
  * and unregister netdevices from the networking subsystem.
  *
  * @hw: the hardware to unregister
  */
 void ieee802154_unregister_hw(struct ieee802154_hw *hw);

 /**
  * ieee802154_rx - receive frame
  *
  * Use this function to hand received frames to mac802154. The receive
  * buffer in @skb must start with an IEEE 802.15.4 header. In case of a
  * paged @skb is used, the driver is recommended to put the ieee802154
  * header of the frame on the linear part of the @skb to avoid memory
  * allocation and/or memcpy by the stack.
  *
  * This function may not be called in IRQ context. Calls to this function
  * for a single hardware must be synchronized against each other.
  *
  * @hw: the hardware this frame came in on
  * @skb: the buffer to receive, owned by mac802154 after this call
  */
 void ieee802154_rx(struct ieee802154_hw *hw, struct sk_buff *skb);

 /**
  * ieee802154_rx_irqsafe - receive frame
  *
  * Like ieee802154_rx() but can be called in IRQ context
  * (internally defers to a tasklet.)
  *
  * @hw: the hardware this frame came in on
  * @skb: the buffer to receive, owned by mac802154 after this call
  * @lqi: link quality indicator
  */
 void ieee802154_rx_irqsafe(struct ieee802154_hw *hw, struct sk_buff *skb,
 			   u8 lqi);
 /**
  * ieee802154_wake_queue - wake ieee802154 queue
  * @hw: pointer as obtained from ieee802154_alloc_hw().
  *
  * Drivers should use this function instead of netif_wake_queue.
  */
 void ieee802154_wake_queue(struct ieee802154_hw *hw);

 /**
  * ieee802154_stop_queue - stop ieee802154 queue
  * @hw: pointer as obtained from ieee802154_alloc_hw().
  *
  * Drivers should use this function instead of netif_stop_queue.
  */
 void ieee802154_stop_queue(struct ieee802154_hw *hw);

 /**
  * ieee802154_xmit_complete - frame transmission complete
  *
  * @hw: pointer as obtained from ieee802154_alloc_hw().
  * @skb: buffer for transmission
  * @ifs_handling: indicate interframe space handling
  */
 void ieee802154_xmit_complete(struct ieee802154_hw *hw, struct sk_buff *skb,
 			      bool ifs_handling);

 #endif /* NET_MAC802154_H */
	/*
	* IEEE802.15.4-2003 specification
	*
	* Copyright (C) 2007-2012 Siemens AG
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2
	* as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	*/
	#ifndef NET_MAC802154_H
	#define NET_MAC802154_H

	#include <net/af_ieee802154.h>
	#include <linux/ieee802154.h>
	#include <linux/skbuff.h>
	#include <linux/unaligned/memmove.h>

	#include <net/cfg802154.h>

	/* General MAC frame format:
	* 2 bytes: Frame Control
	* 1 byte: Sequence Number
	* 20 bytes: Addressing fields
	* 14 bytes: Auxiliary Security Header
	*/
	#define MAC802154_FRAME_HARD_HEADER_LEN (2 + 1 + 20 + 14)

	/**
	* enum ieee802154_hw_addr_filt_flags - hardware address filtering flags
	*
	* The following flags are used to indicate changed address settings from
	* the stack to the hardware.
	*
	* @IEEE802154_AFILT_SADDR_CHANGED: Indicates that the short address will be
	* change.
	*
	* @IEEE802154_AFILT_IEEEADDR_CHANGED: Indicates that the extended address
	* will be change.
	*
	* @IEEE802154_AFILT_PANID_CHANGED: Indicates that the pan id will be change.
	*
	* @IEEE802154_AFILT_PANC_CHANGED: Indicates that the address filter will
	* do frame address filtering as a pan coordinator.
	*/
	enum ieee802154_hw_addr_filt_flags {
	IEEE802154_AFILT_SADDR_CHANGED = BIT(1),
	IEEE802154_AFILT_IEEEADDR_CHANGED = BIT(2),
	IEEE802154_AFILT_PANID_CHANGED = BIT(3),
	IEEE802154_AFILT_PANC_CHANGED = BIT(4),
	};

	struct ieee802154_hw_addr_filt {
	__le16 pan_id; /* Each independent PAN selects a unique
	* identifier. This PAN id allows communication
	* between devices within a network using short
	* addresses and enables transmissions between
	* devices across independent networks.
	*/
	__le16 short_addr;
	__le64 ieee_addr;
	u8 pan_coord;
	};

	struct ieee802154_hw {
	/* filled by the driver */
	int extra_tx_headroom;
	u32 flags;
	struct device *parent;

	/* filled by mac802154 core */
	struct ieee802154_hw_addr_filt hw_filt;
	void *priv;
	struct wpan_phy *phy;
	};

	/* Checksum is in hardware and is omitted from a packet
	*
	* These following flags are used to indicate hardware capabilities to
	* the stack. Generally, flags here should have their meaning
	* done in a way that the simplest hardware doesn't need setting
	* any particular flags. There are some exceptions to this rule,
	* however, so you are advised to review these flags carefully.
	*/

	/* Indicates that xmitter will add FCS on it's own. */
	#define IEEE802154_HW_TX_OMIT_CKSUM 0x00000001
	/* Indicates that transceiver will support listen before transmit. */
	#define IEEE802154_HW_LBT 0x00000004
	/* Indicates that transceiver will support csma (max_be, min_be, csma retries)
	* settings. */
	#define IEEE802154_HW_CSMA_PARAMS 0x00000008
	/* Indicates that transceiver will support ARET frame retries setting. */
	#define IEEE802154_HW_FRAME_RETRIES 0x00000010
	/* Indicates that transceiver will support hardware address filter setting. */
	#define IEEE802154_HW_AFILT 0x00000020
	/* Indicates that transceiver will support promiscuous mode setting. */
	#define IEEE802154_HW_PROMISCUOUS 0x00000040
	/* Indicates that receiver omits FCS. */
	#define IEEE802154_HW_RX_OMIT_CKSUM 0x00000080
	/* Indicates that receiver will not filter frames with bad checksum. */
	#define IEEE802154_HW_RX_DROP_BAD_CKSUM 0x00000100

	/* Indicates that receiver omits FCS and xmitter will add FCS on it's own. */
	#define IEEE802154_HW_OMIT_CKSUM (IEEE802154_HW_TX_OMIT_CKSUM \| \
	IEEE802154_HW_RX_OMIT_CKSUM)

	/* struct ieee802154_ops - callbacks from mac802154 to the driver
	*
	* This structure contains various callbacks that the driver may
	* handle or, in some cases, must handle, for example to transmit
	* a frame.
	*
	* start: Handler that 802.15.4 module calls for device initialization.
	* This function is called before the first interface is attached.
	*
	* stop: Handler that 802.15.4 module calls for device cleanup.
	* This function is called after the last interface is removed.
	*
	* xmit_sync:
	* Handler that 802.15.4 module calls for each transmitted frame.
	* skb cntains the buffer starting from the IEEE 802.15.4 header.
	* The low-level driver should send the frame based on available
	* configuration. This is called by a workqueue and useful for
	* synchronous 802.15.4 drivers.
	* This function should return zero or negative errno.
	*
	* WARNING:
	* This will be deprecated soon. We don't accept synced xmit callbacks
	* drivers anymore.
	*
	* xmit_async:
	* Handler that 802.15.4 module calls for each transmitted frame.
	* skb cntains the buffer starting from the IEEE 802.15.4 header.
	* The low-level driver should send the frame based on available
	* configuration.
	* This function should return zero or negative errno.
	*
	* ed: Handler that 802.15.4 module calls for Energy Detection.
	* This function should place the value for detected energy
	* (usually device-dependant) in the level pointer and return
	* either zero or negative errno. Called with pib_lock held.
	*
	* set_channel:
	* Set radio for listening on specific channel.
	* Set the device for listening on specified channel.
	* Returns either zero, or negative errno. Called with pib_lock held.
	*
	* set_hw_addr_filt:
	* Set radio for listening on specific address.
	* Set the device for listening on specified address.
	* Returns either zero, or negative errno.
	*
	* set_txpower:
	* Set radio transmit power in mBm. Called with pib_lock held.
	* Returns either zero, or negative errno.
	*
	* set_lbt
	* Enables or disables listen before talk on the device. Called with
	* pib_lock held.
	* Returns either zero, or negative errno.
	*
	* set_cca_mode
	* Sets the CCA mode used by the device. Called with pib_lock held.
	* Returns either zero, or negative errno.
	*
	* set_cca_ed_level
	* Sets the CCA energy detection threshold in mBm. Called with pib_lock
	* held.
	* Returns either zero, or negative errno.
	*
	* set_csma_params
	* Sets the CSMA parameter set for the PHY. Called with pib_lock held.
	* Returns either zero, or negative errno.
	*
	* set_frame_retries
	* Sets the retransmission attempt limit. Called with pib_lock held.
	* Returns either zero, or negative errno.
	*
	* set_promiscuous_mode
	* Enables or disable promiscuous mode.
	*/
	struct ieee802154_ops {
	struct module *owner;
	int (start)(struct ieee802154_hw hw);
	void (stop)(struct ieee802154_hw hw);
	int (xmit_sync)(struct ieee802154_hw hw,
	struct sk_buff *skb);
	int (xmit_async)(struct ieee802154_hw hw,
	struct sk_buff *skb);
	int (ed)(struct ieee802154_hw hw, u8 *level);
	int (set_channel)(struct ieee802154_hw hw, u8 page,
	u8 channel);
	int (set_hw_addr_filt)(struct ieee802154_hw hw,
	struct ieee802154_hw_addr_filt *filt,
	unsigned long changed);
	int (set_txpower)(struct ieee802154_hw hw, s32 mbm);
	int (set_lbt)(struct ieee802154_hw hw, bool on);
	int (set_cca_mode)(struct ieee802154_hw hw,
	const struct wpan_phy_cca *cca);
	int (set_cca_ed_level)(struct ieee802154_hw hw, s32 mbm);
	int (set_csma_params)(struct ieee802154_hw hw,
	u8 min_be, u8 max_be, u8 retries);
	int (set_frame_retries)(struct ieee802154_hw hw,
	s8 retries);
	int (set_promiscuous_mode)(struct ieee802154_hw hw,
	const bool on);
	};

	/**
	* ieee802154_be64_to_le64 - copies and convert be64 to le64
	* @le64_dst: le64 destination pointer
	* @be64_src: be64 source pointer
	*/
	static inline void ieee802154_be64_to_le64(void le64_dst, const void be64_src)
	{
	__put_unaligned_memmove64(swab64p(be64_src), le64_dst);
	}

	/**
	* ieee802154_le64_to_be64 - copies and convert le64 to be64
	* @be64_dst: be64 destination pointer
	* @le64_src: le64 source pointer
	*/
	static inline void ieee802154_le64_to_be64(void be64_dst, const void le64_src)
	{
	__put_unaligned_memmove64(swab64p(le64_src), be64_dst);
	}

	/**
	* ieee802154_alloc_hw - Allocate a new hardware device
	*
	* This must be called once for each hardware device. The returned pointer
	* must be used to refer to this device when calling other functions.
	* mac802154 allocates a private data area for the driver pointed to by
	* @priv in &struct ieee802154_hw, the size of this area is given as
	* @priv_data_len.
	*
	* @priv_data_len: length of private data
	* @ops: callbacks for this device
	*
	* Return: A pointer to the new hardware device, or %NULL on error.
	*/
	struct ieee802154_hw *
	ieee802154_alloc_hw(size_t priv_data_len, const struct ieee802154_ops *ops);

	/**
	* ieee802154_free_hw - free hardware descriptor
	*
	* This function frees everything that was allocated, including the
	* private data for the driver. You must call ieee802154_unregister_hw()
	* before calling this function.
	*
	* @hw: the hardware to free
	*/
	void ieee802154_free_hw(struct ieee802154_hw *hw);

	/**
	* ieee802154_register_hw - Register hardware device
	*
	* You must call this function before any other functions in
	* mac802154. Note that before a hardware can be registered, you
	* need to fill the contained wpan_phy's information.
	*
	* @hw: the device to register as returned by ieee802154_alloc_hw()
	*
	* Return: 0 on success. An error code otherwise.
	*/
	int ieee802154_register_hw(struct ieee802154_hw *hw);

	/**
	* ieee802154_unregister_hw - Unregister a hardware device
	*
	* This function instructs mac802154 to free allocated resources
	* and unregister netdevices from the networking subsystem.
	*
	* @hw: the hardware to unregister
	*/
	void ieee802154_unregister_hw(struct ieee802154_hw *hw);

	/**
	* ieee802154_rx - receive frame
	*
	* Use this function to hand received frames to mac802154. The receive
	* buffer in @skb must start with an IEEE 802.15.4 header. In case of a
	* paged @skb is used, the driver is recommended to put the ieee802154
	* header of the frame on the linear part of the @skb to avoid memory
	* allocation and/or memcpy by the stack.
	*
	* This function may not be called in IRQ context. Calls to this function
	* for a single hardware must be synchronized against each other.
	*
	* @hw: the hardware this frame came in on
	* @skb: the buffer to receive, owned by mac802154 after this call
	*/
	void ieee802154_rx(struct ieee802154_hw hw, struct sk_buff skb);

	/**
	* ieee802154_rx_irqsafe - receive frame
	*
	* Like ieee802154_rx() but can be called in IRQ context
	* (internally defers to a tasklet.)
	*
	* @hw: the hardware this frame came in on
	* @skb: the buffer to receive, owned by mac802154 after this call
	* @lqi: link quality indicator
	*/
	void ieee802154_rx_irqsafe(struct ieee802154_hw hw, struct sk_buff skb,
	u8 lqi);
	/**
	* ieee802154_wake_queue - wake ieee802154 queue
	* @hw: pointer as obtained from ieee802154_alloc_hw().
	*
	* Drivers should use this function instead of netif_wake_queue.
	*/
	void ieee802154_wake_queue(struct ieee802154_hw *hw);

	/**
	* ieee802154_stop_queue - stop ieee802154 queue
	* @hw: pointer as obtained from ieee802154_alloc_hw().
	*
	* Drivers should use this function instead of netif_stop_queue.
	*/
	void ieee802154_stop_queue(struct ieee802154_hw *hw);

	/**
	* ieee802154_xmit_complete - frame transmission complete
	*
	* @hw: pointer as obtained from ieee802154_alloc_hw().
	* @skb: buffer for transmission
	* @ifs_handling: indicate interframe space handling
	*/
	void ieee802154_xmit_complete(struct ieee802154_hw hw, struct sk_buff skb,
	bool ifs_handling);

	#endif /* NET_MAC802154_H */