| HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop) |
| |
| Controller Register Map |
| ------------------------- |
| |
| For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2: |
| |
| BAR0 offset Register |
| 0x11C5C Link Interface IRQ Set |
| 0x11C60 Link Interface IRQ Clear |
| |
| BAR2 offset Register |
| 0x10 Inbound Message Register 0 |
| 0x14 Inbound Message Register 1 |
| 0x18 Outbound Message Register 0 |
| 0x1C Outbound Message Register 1 |
| 0x20 Inbound Doorbell Register |
| 0x24 Inbound Interrupt Status Register |
| 0x28 Inbound Interrupt Mask Register |
| 0x30 Outbound Interrupt Status Register |
| 0x34 Outbound Interrupt Mask Register |
| 0x40 Inbound Queue Port |
| 0x44 Outbound Queue Port |
| |
| For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0: |
| |
| BAR0 offset Register |
| 0x10 Inbound Message Register 0 |
| 0x14 Inbound Message Register 1 |
| 0x18 Outbound Message Register 0 |
| 0x1C Outbound Message Register 1 |
| 0x20 Inbound Doorbell Register |
| 0x24 Inbound Interrupt Status Register |
| 0x28 Inbound Interrupt Mask Register |
| 0x30 Outbound Interrupt Status Register |
| 0x34 Outbound Interrupt Mask Register |
| 0x40 Inbound Queue Port |
| 0x44 Outbound Queue Port |
| |
| For Marvell not Frey IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1: |
| |
| BAR0 offset Register |
| 0x20400 Inbound Doorbell Register |
| 0x20404 Inbound Interrupt Mask Register |
| 0x20408 Outbound Doorbell Register |
| 0x2040C Outbound Interrupt Mask Register |
| |
| BAR1 offset Register |
| 0x0 Inbound Queue Head Pointer |
| 0x4 Inbound Queue Tail Pointer |
| 0x8 Outbound Queue Head Pointer |
| 0xC Outbound Queue Tail Pointer |
| 0x10 Inbound Message Register |
| 0x14 Outbound Message Register |
| 0x40-0x1040 Inbound Queue |
| 0x1040-0x2040 Outbound Queue |
| |
| For Marvell Frey IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1: |
| |
| BAR0 offset Register |
| 0x0 IOP configuration information. |
| |
| BAR1 offset Register |
| 0x4000 Inbound List Base Address Low |
| 0x4004 Inbound List Base Address High |
| 0x4018 Inbound List Write Pointer |
| 0x402C Inbound List Configuration and Control |
| 0x4050 Outbound List Base Address Low |
| 0x4054 Outbound List Base Address High |
| 0x4058 Outbound List Copy Pointer Shadow Base Address Low |
| 0x405C Outbound List Copy Pointer Shadow Base Address High |
| 0x4088 Outbound List Interrupt Cause |
| 0x408C Outbound List Interrupt Enable |
| 0x1020C PCIe Function 0 Interrupt Enable |
| 0x10400 PCIe Function 0 to CPU Message A |
| 0x10420 CPU to PCIe Function 0 Message A |
| 0x10480 CPU to PCIe Function 0 Doorbell |
| 0x10484 CPU to PCIe Function 0 Doorbell Enable |
| |
| |
| I/O Request Workflow of Not Marvell Frey |
| ------------------------------------------ |
| |
| All queued requests are handled via inbound/outbound queue port. |
| A request packet can be allocated in either IOP or host memory. |
| |
| To send a request to the controller: |
| |
| - Get a free request packet by reading the inbound queue port or |
| allocate a free request in host DMA coherent memory. |
| |
| The value returned from the inbound queue port is an offset |
| relative to the IOP BAR0. |
| |
| Requests allocated in host memory must be aligned on 32-bytes boundary. |
| |
| - Fill the packet. |
| |
| - Post the packet to IOP by writing it to inbound queue. For requests |
| allocated in IOP memory, write the offset to inbound queue port. For |
| requests allocated in host memory, write (0x80000000|(bus_addr>>5)) |
| to the inbound queue port. |
| |
| - The IOP process the request. When the request is completed, it |
| will be put into outbound queue. An outbound interrupt will be |
| generated. |
| |
| For requests allocated in IOP memory, the request offset is posted to |
| outbound queue. |
| |
| For requests allocated in host memory, (0x80000000|(bus_addr>>5)) |
| is posted to the outbound queue. If IOP_REQUEST_FLAG_OUTPUT_CONTEXT |
| flag is set in the request, the low 32-bit context value will be |
| posted instead. |
| |
| - The host read the outbound queue and complete the request. |
| |
| For requests allocated in IOP memory, the host driver free the request |
| by writing it to the outbound queue. |
| |
| Non-queued requests (reset/flush etc) can be sent via inbound message |
| register 0. An outbound message with the same value indicates the completion |
| of an inbound message. |
| |
| |
| I/O Request Workflow of Marvell Frey |
| -------------------------------------- |
| |
| All queued requests are handled via inbound/outbound list. |
| |
| To send a request to the controller: |
| |
| - Allocate a free request in host DMA coherent memory. |
| |
| Requests allocated in host memory must be aligned on 32-bytes boundary. |
| |
| - Fill the request with index of the request in the flag. |
| |
| Fill a free inbound list unit with the physical address and the size of |
| the request. |
| |
| Set up the inbound list write pointer with the index of previous unit, |
| round to 0 if the index reaches the supported count of requests. |
| |
| - Post the inbound list writer pointer to IOP. |
| |
| - The IOP process the request. When the request is completed, the flag of |
| the request with or-ed IOPMU_QUEUE_MASK_HOST_BITS will be put into a |
| free outbound list unit and the index of the outbound list unit will be |
| put into the copy pointer shadow register. An outbound interrupt will be |
| generated. |
| |
| - The host read the outbound list copy pointer shadow register and compare |
| with previous saved read ponter N. If they are different, the host will |
| read the (N+1)th outbound list unit. |
| |
| The host get the index of the request from the (N+1)th outbound list |
| unit and complete the request. |
| |
| Non-queued requests (reset communication/reset/flush etc) can be sent via PCIe |
| Function 0 to CPU Message A register. The CPU to PCIe Function 0 Message register |
| with the same value indicates the completion of message. |
| |
| |
| User-level Interface |
| --------------------- |
| |
| The driver exposes following sysfs attributes: |
| |
| NAME R/W Description |
| driver-version R driver version string |
| firmware-version R firmware version string |
| |
| |
| ----------------------------------------------------------------------------- |
| Copyright (C) 2006-2012 HighPoint Technologies, Inc. All Rights Reserved. |
| |
| This file is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| linux@highpoint-tech.com |
| http://www.highpoint-tech.com |